CPU / GPU change to Perfomance mode? - OnePlus X Q&A, Help & Troubleshooting

Hello all,
how can i change the CPU/GPU mode to perfomance? should i root my phone for this? Sorry if this is a newbie question.. i already saw in some threads here ( benchmark thread ) that some user got better results by changing these to perfomance. also its better for gaming on my opx.
thank you

As far as i know, yes.
You need root to use Kernel Apps, like Kernel Aduitor.

seriyo said:
Hello all,
how can i change the CPU/GPU mode to perfomance? should i root my phone for this? Sorry if this is a newbie question.. i already saw in some threads here ( benchmark thread ) that some user got better results by changing these to perfomance. also its better for gaming on my opx.
thank you
Click to expand...
Click to collapse
yes, root it and install kernel auditor to change settings. Or install custom kernel(blu_spark is available and its good) and tweak accordingly and carefully.
But be cautious, changing to something you don't know may render your phone to be useless/boot loop or brick. Do only the changes you know.

Related

[Tests] Improving Speed technics Gen8 devices

I posted in Chulri's thread but here will be better seen from anyone.
Device : A70IT , fw 2.1.08
Is anyone willing to try something I DID and seems to me to give my tablet significant speed increase. I want to check if it is real or just my imagination.
In my latest fw 2.1.08 installed, I flashed 2.1.08 initframs and 2.0.71 zimage (both from chulri files, first post . you know how to : flash kernel from developer menu at boot holding vol- button)
And I set the speed with SetCPU 2.1.1a to 1000mHz both min and max. Also in settings menu I choosed "Overdrive"
Please test and report.
Thanks
lagoskon said:
I posted in Chulri's thread but here will be better seen from anyone.
Device : A70IT , fw 2.1.08
Is anyone willing to try something I DID and seems to me to give my tablet significant speed increase. I want to check if it is real or just my imagination.
In my latest fw 2.1.08 installed, I flashed 2.1.08 initframs and 2.0.71 zimage (both from chulri files, first post . you know how to : flash kernel from developer menu at boot holding vol- button)
And I set the speed with SetCPU 2.1.1a to 1000mHz both min and max. Also in settings menu I choosed "Overdrive"
Please test and report.
Thanks
Click to expand...
Click to collapse
Of course it is real, since your tablet will run at maximum speed all the time instead of running at 1000mhz for heavily load task only like default (not count the overclock here). However, it will consume more battery and get hot faster.
If you don't care much about battery life, then it will do the trick.
Before the 2.0.71 zimage kernel I was running at full speed the 2.1.08 kernel. After the switch I noticed more speed gain. That's why I need confirmation from other users.
I have had my A70 set to 1000 min and 1200 max for months now, and I have seen a speed increase, and only a little extra battery drain.
lagoskon said:
I posted in Chulri's thread but here will be better seen from anyone.
Device : A70IT , fw 2.1.08
...
Click to expand...
Click to collapse
What kind of test you want to?
Have you try OverClock? Archos Gen8 can OC to 1.2GHz as well

[Q] [Kernel] Looking for Custom Kernel - ROM 6.1.1.C.1.0 Xperia U-T-Mob (Croatia)

Dear Senior Members/ Developers/ Members,
Would highly appreciate if you all can guide/ help/ post links for a custom stable kernel, battery boost, no lags, etc.
Device :
Xperia U - ST25i
Firmware - 6.1.1.C.1.0 Xperia U-T-Mobile (Croatia)
Rooted***
CWM Recovery - 6.1.0.2
Custom Mods - None
Smart Governors v0.201 Installed - using Governor - SmartAss v.007 IO Scheduler cfq
Custom Boot Animation - to replace T-mobile splash screen
Waiting for replies..
Thanks a Lot:good:
Well lags cannot be removed because android has VSYNC enabled while graphic card not,I had same problem in PC and games lagged until I enabled VSYNC on graphic card,battery is pretty good,performance is pretty good,if you want quick app launch install RGND Seeder.
Where is problem,whats missing for you.
try this ) im using it now )) http://forum.xda-developers.com/showthread.php?t=1927126
Why u post in general section? ??
Although u have mentioned [q] in topic name
drsanket_xperia_u said:
Why u post in general section? ??
Although u have mentioned [q] in topic name
Click to expand...
Click to collapse
My Bad m8.. Apologies... :angel:

[Q] Undervolting the GPU of the I9100

Hallo community,
i was reading here in forums about overclocking the S2 to find the solution matching my needs. I want to UNDER-clock my phone to get a better batterylife.
I allready made many optimizations so I have really good Bat-Time.
Now I'm at the point where it comes to Undervolting. Unfortunately the solutions shown here in forums dont work for my setup.
I have a i9100 + Supernexus2.0 build4 ROM (AOSP 4.2.2) + DorimanX 8.13 Kernel
CPU-Undervolting is no problem......the problem starts when it comes to modify GPU-settings. None of the Software discussed here regognizes my GPU. Antutu for example says "GPU not supported" on GPU-tab. (tryed "voltage control", "antutu", "setCPU" "Tegrak" NS-tools" and many others )
Now I'm on the point where I accept, that there is no simple-software-solution to automize my settings (or perhaps I didn't see it) and I try it with "STweaks"
So what I going to try now is to modify the the different steps and set a voltage/mhz manual everytime I boot-up.
But in other Forum-posts I read, that there are 3-GPU-steps. In STweaks there are shown 5 steps to me ?!
I dont have the right clue what Step is set in which state. What does these steps mean exactly ?
Can anyone help me how to Undervolt my GPU correctly ? I dont need 267MHz+1050mV. I'm happy with 160MHz and 900mV (for example) The games I play are not very hungry. Also I heared from other users that undervolting there GPU gave them +3 Hours playing time, unfortunatly I can't reproduce that here
Is it perhaps because I have 4.2.2 ROM with newest DorimanX, that I cant do the solutions that work for others ?
THX 4 any help
best regards
revnu

[Q] Help Please ! ZOPO ZP600+ problem :(

Hey guys
I'm totally new here and nearly a complete noob !
I got a ZOPO ZP600+ 3D phone with android 4.2.2 and kernel version : 3.4.5
Chipset is MT6582 Quad 1.3Ghz A7 with Mali400MP2 @ 500mhz ( I guess ) and 1GB of RAM
I have a problem( with the phone of course ! ) that is messing with my mind
I think its related to 2D rendering
all of the launchers are slow and they're not smooth . they're even slower than a simple dual core phone !
the default live wallpapers are running on slow framerate and laggy (somewhat near 10~15 fps)
and I tested a 2D game called "Line Runner" and it runs like slow motion !!!
I don't know what the hell is wrong with my phone .
I flashed a custom rom ( have exposed framework by default) and changes some settings and tested some exposed options but had no luck fixing the issue
I ran V6 Supercharger script but still didn't fixed it
force gpu rendering on developer options didn't help
I don't have any problems with 3D games and my antutu score is ~17400
( Rooted , Custom rom , Xposed installed , CWM Recovery )
please help me ;( , what should I do to fix this issue ? Its really driving me mad
Come on guys . help me out here
Nobody really knows what the hell is wrong with my device ? :crying:
I can try testing on mine to compare results. My Antutu is also 17000 +. What other test have you made with what score, I will put those on mine and tell you, so that we see if it is consistent, or unique.
I am on my stock ROM though, please note. Has it always been like this with you, even with the stock ROM?

Question Overclocking S780G

I know "Konabess" for overclocking GPU.
Although there is a choise for S780G , but there isn't any set.
Can anyone tell me how to set Konabess for S780G.
Thanks!
What exactly doesn't work? It needs to flash the new boot image

Categories

Resources