Hi to all, I'm new to all this but I hope you guys can help me.
I have a Samsung Galaxy Ace GT-S5830i, rooted but no ROM flashed; I unlocked it a couple of weeks ago using an app whose name I don't remember, but it was working fine after that. I was running short of internal memory so I did the little tweak as described in this page (I'm sorry about the links, I can't post them yet):
techgage [DOT] com/article/moving_your_non-movable_android_apps_to_an_sd_card/
After I successfully did the steps to enable moving the apps, I moved some of them to the SD Card, basically Whatsapp and Sleep as Android. I accidentally moved the Google Play Services too, but I put them back in internal phone storage thinking that it could be an important app. However, I think I didn't set the default installation location back to internal memory (setting value=0) after I did this. I also unchecked the USB debugging option. Now, a day later, I restarted my phone because it froze (I actually had to remove the battery cause it didn't respond to any input), and I couldn't turn it on again. It was just frozen in the boot screen where it says "Samsung Galaxy Ace GT-S5830i".
I have tried formatting the phone from the system recovery utility (accessed by using the Power+VolumeUp+Menu combination), but it does nothing. The options I have are:
1) "reboot system now", which doesn't do anything. It just says "-- Appling Muti-CSC --", with the options no longer available to select, so I have to restart it.
2) "apply update from sdcard", which gives back the error message "E:failed to mount /sdcard (No such file or directory) E: Can't mount /sdcard Install from sdcard complete." After this I can still select any of the other options. I do have the SD card inside its slot.
3) "wipe data/factory reset" gives a warning message that "THIS CAN NOT BE UNDONE" and, after selecting "Yes -- delete all user data" it just sits there saying "-- Wiping data... Formatting /data..." with a progress bar in the background that doesn't advance even after letting it there over a night.
4) "wipe cache partition" just does that ("-- Wiping cache... Formatting /cache... Cache wipe complete."), and then I can select the other options again.
I don't know what to do anymore. I have tried updating the firmware using the Samsung Kies program but for some reason it doesn't accept the serial number (S/N) when asked for it, and my computer doesn't seem to detect the phone. When I plug it in through the USB port I can see the "Removable Disk (F" device appear, but when I try to access it asks to "insert a disk into F:", so I suspect it may be the SD card what it detects. When I use the command "adb devices" in the command prompt, no device is listed. All the other adb commands I have tried give back the "error: device not found" message.
Moreover, now I don't need to use the Power+VolumeUp+Menu combination to get to recovery mode: every time I turn it on or plug it to the computer it directly takes me to "Android system recovery utility" after the booting screen.
In the following link you'll find a photo of the screen of my phone after performing the options 2), 4) and 3) (in that order) from the recovery mode. Sorry for the bad quality; the messages are transcribed above. I hope any of you guys can help me.
Screen photo: imgur [DOT] com/P6b1OfQ
EDIT: I have tried to install the Stock Firmware using Odin as explained in this thread:
[XDA FORUM ADDRESS] /showthread.php?t=2639940
I have done all the steps succesfully, but after the phone reboots, it gets stuck again in the formatting process... The message are like follow:
"Finding update package...
Opening update package...
Installing update...
-- Appling Muti-CSC --
Formatting /cache [Progress bar in the background that isn't moving for 20 minutes]
-- Appling Muti-CSC --"
It's been like that for 20 minutes already, and Odin says "PASS!", but the phone just stopped there, trying to format...
This is what the Odin log said:
"<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> BcmCP.img
<ID:0/003> boot.img
<ID:0/003> system.img
<ID:0/003> param.lfs
<ID:0/003> csc.rfs
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)"
I will be forever thankful if somebody can help me. Thank you very much in advance.
I finally could solve this issue, I just did the steps in a guide I found here in this forum, something with a catchy title like "UNBRICK METHOD 99.9% EFFECTIVE!! NO ROOT" or something like that. After that I could finally format my phone and start again. Cheers to all y'all.
I was on DRL6 and Pie, and tried to do the CRK1 to DRL6 through Odin 3.13 Patched version, went into Odin mode on the phone. Added BL + AP + CP + HOME_CSC like the tutorial stated, Odin said (success 0 / failed 2), so I assumed I didn't have Samsung drivers installed, closed out of Odin and installed the drivers, rebooted Odin it seemed like it was going to work because it went further than the other tries but then it failed at "Complete(Write) operation failed."
I tried different cords, USB ports, turned off Firewall.
So, I figured I'd leave it alone, restarted my phone and it noticed it wouldn't reboot. I unplugged it, and held down the power button which booted up:
[UPLOAD MODE]
Unkown Error
----------------------
DDR Vendor: Samsung
SOC_HW_REVISION: 2.1
skip print_summary_to_lcd..
Generating summary...
>> General Info
>> DDR Info
>> RPM
>> TrustZone
>> Hypervisor
Done!
[To PC] Connect a USB cable or
[To SD] Press VOL_UP + VOL_DOWN
Click to expand...
Click to collapse
Tried Odin while in the mode and now this is what I'm getting:
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> dqmdbg.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 4907 M
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Edit: Got it into Download Mode, this is what I'm getting now.
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 4920 M
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Edit 2: Did some Googling, and seen that my cache could've been corrupted. So, I went back into Download mode, flashed just CSC in Odin, and my phone worked again. So, being stubborn, I flashed BL + AP + CP without CSC and my phone is now Optimizing App, then reboots and continues the cycle. I'm now back in Upload Mode and stuck, phone won't turn off or anything.
[UPLOAD MODE]
Unkown Error
DDR Vendor: Samsung
SOC_HW_REVISION: 2.1
RAM dump by hard reset
lastSns: 0x5a
Generating summary...
General Info
DDR Info
DCVS Info
Recovered from an exception
Done.
[To PC] Connect a USB cable or
[To SD] Press VOL_UP + VOL_DOWN
Synchronous Exceoption
lr: 0x0000000085e37228
sp: 0x000000001407bba0
pc: 0x0000000085e37288
Click to expand...
Click to collapse
Edit 3: Back to Optimizing and rebooting again. It goes to completion but then reboots back to the Samsung logo.
What phone do you have? I had a similar problem that is almost exactly as you described. I have an N950U1 but I flashed the T-Mobile firmware to mine a few months ago. I believe that was my problem but I could be wrong. I posted in another thread about this. https://forum.xda-developers.com/at...in-flash-to-note-8-specific-computer-t3883398 . I think I could have flashed the unlocked firmware, but I haven't tried to see if that is the solution.
I have a Galaxy S8+ (SM-G955U).
After a few days it was working just fine, then suddenly after I let it die out of charge, it did not turn on. During this state, the phone was rooted.
First, the Issue was loading into Download mode (still happening), it loads but the screen is black. I use Odin so it tells me when the Pc recognize it, and it does. I tried flashing stock ROM with Odin but it stays on setup and if not it stays on Initializing forever, now the problem is a bit easier to solve because it just stays stuck on the Samsung Logo. Odin Recognizes my device but doesn't flash anything. It says on analysis forever and if it continues to setup connection it stays there for 15-20 minutes . It fails. <OSM> All threads completed ( succeed 0 / failed 1).
I can only boot to Download Mode nothing else. Not even Recovery Mode.
Not sure if this matters but this is my full model
SM-G955UZKATMB ( Tried finding this exact firmware but no luck.
I don't have a recovery mode for some reason it won't boot to this mode only Download mode.
Not sure if this matter but it doesn't charge either, it stays on the charging state, a blank circle with a thunderbolt symbol inside.
IF anyone has any idea or hint of what I can do, please comment.
Thanks again.
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis.. (TAKES A WHILE)
<ID:0/009> skip file list for home binary
<ID:0/009> apdp.mbn
<ID:0/009> msadp.mbn
<ID:0/009> persist.img.ext4
<ID:0/009> Home Binary Download
<ID:0/009> SetupConnection.. (TAKES DOUBLE THE WHILE)
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Maybe more expertise is available here: https://forum.xda-developers.com/galaxy-s8+
zen2o1 said:
I have a Galaxy S8+ (SM-G955U).
After a few days it was working just fine, then suddenly after I let it die out of charge, it did not turn on. During this state, the phone was rooted.
First, the Issue was loading into Download mode (still happening), it loads but the screen is black. I use Odin so it tells me when the Pc recognize it, and it does. I tried flashing stock ROM with Odin but it stays on setup and if not it stays on Initializing forever, now the problem is a bit easier to solve because it just stays stuck on the Samsung Logo. Odin Recognizes my device but doesn't flash anything. It says on analysis forever and if it continues to setup connection it stays there for 15-20 minutes . It fails. <OSM> All threads completed ( succeed 0 / failed 1).
I can only boot to Download Mode nothing else. Not even Recovery Mode.
Not sure if this matters but this is my full model
SM-G955UZKATMB ( Tried finding this exact firmware but no luck.
I don't have a recovery mode for some reason it won't boot to this mode only Download mode.
Not sure if this matter but it doesn't charge either, it stays on the charging state, a blank circle with a thunderbolt symbol inside.
IF anyone has any idea or hint of what I can do, please comment.
Thanks again.
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis.. (TAKES A WHILE)
<ID:0/009> skip file list for home binary
<ID:0/009> apdp.mbn
<ID:0/009> msadp.mbn
<ID:0/009> persist.img.ext4
<ID:0/009> Home Binary Download
<ID:0/009> SetupConnection.. (TAKES DOUBLE THE WHILE)
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You need to use latest firmware for example this one :
https://samfrew.com/download/Galaxy__S8+__/hsjp/TMB/G955USQU5DSD3/G955UOYN5DSD3/
Use slow download and IDM manager ...
After that extract firmware and flash with Odin ...
Hi,
I did a lot of trying to get twrp installed.
After a while I followed a hint and it worked but I lost Magisk.
After installing Magisk I got a bootloop. Magiskuninstaller didn't work and all other methods I know also didn't help.
Now I have only twrp working and maybe that's the only possibility to install anything, because in ODIN I always get failures
e.g.
Trying to install bootloader:
<ID:0/007> abl.elf
<ID:0/007> xbl.elf
<ID:0/007> xbl_config.elf
<ID:0/007> FAIL! (Auth)
and
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
or, when I tick Re-Partition in options
<ID:0/007> Can't open the specified file. (Line: 2006)
any help would be appreciated
Firstly, and please forgive me for nitpicking in your time of dread, if your device can power on it is not bricked, despite what so many uninformed folks say; "bricked" means there is no way to get it to even power on. And since I'm in 'education mode' there is no such thing as "soft brick"; it's like saying something is "kinda dead", and there is no such things as zombies irl.
Anyways, have you tried resetting the tab in recovery mode? Good instructions here:
https://www.hardreset.info/devices/samsung/samsung-galaxy-tab-s6/recovery-mode/
TiTiB said:
Anyways, have you tried resetting the tab in recovery mode? Good instructions here:
https://www.hardreset.info/devices/samsung/samsung-galaxy-tab-s6/recovery-mode/
Click to expand...
Click to collapse
First: Thanks for your support
But: I'm in twrp recovery not in stock
and I cannot enter safe mode
any solution for this?
Tronje said:
First: Thanks for your support
But: I'm in twrp recovery not in stock
and I cannot enter safe mode
any solution for this?
Click to expand...
Click to collapse
I don't think I've had to use button combos while in TWRP, but their purpose is to *force* your device in to a certain state (in this case Recovery), no matter what state they are currently in. Usually in such cases where it looks like critical files or operations are messed up, common, and sound, advice is to get back to stock and then do, whatever.
Other than that, I'll have to defer to what others have to say. Good Luck!
or is there a way to do it via sideload?
it's totally crazy, nothing seemes to work
I was able to install stock boot image and stock recovery that I extracted from firmware that I downloaded from samfrew hopefully I could solve the problems with odin - but failed
I'm even not able to shut down the tablet when connected to powercable - there is a permanent bootloop
I was able to take some photos. Maybe someone will realize what else I could try to do. The large photo shows, what happened when I tried to sideload several versions of the downloaded firmware
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tronje said:
or is there a way to do it via sideload?
it's totally crazy, nothing seemes to work
I was able to install stock boot image and stock recovery that I extracted from firmware that I downloaded from samfrew hopefully I could solve the problems with odin - but failed
I'm even not able to shut down the tablet when connected to powercable - there is a permanent bootloop
I was able to take some photos. Maybe someone will realize what else I could try to do. The large photo shows, what happened when I tried to sideload several versions of the downloaded firmware
View attachment 4988349
View attachment 4988351
View attachment 4988353
View attachment 4988355
Click to expand...
Click to collapse
I'm not an expert here by any means, but I think if you can get to fastboot/bootloader you can use ODIN to do a full restore. I would think you can also use fastboot to just restore the recovery partition as well.
ChrisDos said:
I'm not an expert here by any means, but I think if you can get to fastboot/bootloader you can use ODIN to do a full restore. I would think you can also use fastboot to just restore the recovery partition as well.
Click to expand...
Click to collapse
Dear,
did you really read my post?
I need real, detailled help because I'm always getting errors in Odin.
I think Odin is no longer an option.
Mostly it ends with an FAIL! (Auth)
or Re-Partition operation failed
or, when I tick Re-Partition in options: <ID:0/007> Can't open the specified file. (Line: 2006)
I was so desperate that I was looking for a PIT-file, who knows wherefore, but no success.
I ticked and unticked I think every possible options in Odin, tried several releases of firmware with several releases of Odin-Software and also different twrp releases.
My last hope was my old notebook, as I read, that sometimes there are differences in behaviour between some PC, but failed again.
Maybe a detailed instruction how and what to sideload or another PIT-File (I found only this one: GTS6L_EUR_OPEN.pit)
Maybe that's the problem: I'm using German firmware with European PIT? But I couldn't find European firmware oder German PIT
Tronje said:
Dear,
did you really read my post?
I need real, detailled help because I'm always getting errors in Odin.
I think Odin is no longer an option.
Mostly it ends with an FAIL! (Auth)
or Re-Partition operation failed
or, when I tick Re-Partition in options: <ID:0/007> Can't open the specified file. (Line: 2006)
Click to expand...
Click to collapse
Might want to use Frija to download the firmware. If ODIN is no longer an option, then all is lost. I highly doubt that is though. I've had issues with specific USB cables not working or a bad USB port. I wouldn't panic yet as TiTiB said. As long as you can get it to turn on and get to the bootloader, there should be a way to recover it.
Looks at the Tab 5Se, S10, note 10, etc threads on recoveries. The Tab S6 forums don't seem to be nearly as prolific as other forums.
I know you are at your wits end, but hang end there. Try using Frija to get the proper firmware. You might even try going back to the original or second release in August of last year. You key is going to be getting ODIN to do the work though. I also fine it ludicrous that the Samsung devices have so many different boot options using the keys. Evening the timing of pressing the buttons in a certain order is critical.
ChrisDos said:
Might want to use Frija to download the firmware.
Click to expand...
Click to collapse
ok, I did, downloaded, flashed with the same disappointing result
ChrisDos said:
If ODIN is no longer an option, then all is lost. I highly doubt that is though. I've had issues with specific USB cables not working or a bad USB port. I wouldn't panic yet as TiTiB said. As long as you can get it to turn on
Click to expand...
Click to collapse
I even cannot shut it down. That's what make me think, it's lost.
ChrisDos said:
and get to the bootloader, there should be a way to recover it.
Click to expand...
Click to collapse
I didn't find any. In bootloader there should be a warning message first before entering, but there is none. And later some characters (a status message or something like that) on the top of the screen, but there is none.
ChrisDos said:
Looks at the Tab 5Se, S10, note 10, etc threads on recoveries. The Tab S6 forums don't seem to be nearly as prolific as other forums.
Click to expand...
Click to collapse
that's my very last hope
Tronje said:
I even cannot shut it down. That's what make me think, it's lost.
Click to expand...
Click to collapse
All is not lost - If it powers on, it isn't bricked - Simply software malfunctioning. Would assume you've corrupted the system with Magisk, which means just flashing stock should fix it. No idea why Odin isn't working though, since you've already flashed back to stock recovery - Are you sure you have the correct Firmware? Your bootloader is probably locked again, so you won't be able to flash anything but stock.
bartleby999 said:
All is not lost - If it powers on, it isn't bricked - Simply software malfunctioning. Would assume you've corrupted the system with Magisk, which means just flashing stock should fix it. No idea why Odin isn't working though, since you've already flashed back to stock recovery - Are you sure you have the correct Firmware? Your bootloader is probably locked again, so you won't be able to flash anything but stock.
Click to expand...
Click to collapse
I tried all available firmware versions with different odin releases. It's always the same:
<ID:0/010> Initialzation..
<ID:0/010>Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010> FAIL! (Auth)
<ID:0/010>
<ID:0/010> Re-Partition operation failed.
Trying to flash twrp recovery:
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> recovery.img
<ID:0/007> vbmeta.img
<ID:0/007> FAIL! (Auth)
<ID:0/007>
I really really would like to know where this FAIL! (Auth) comes from. But all google search brought solutions not fitting to my situation.
Few minutes ago it just let me flash TWRP_T865_3.3.1-9.tar without grumbling - but there is no twrp recovery, only stock
<ID:0/007> Odin engine v(ID:3.1301)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 0 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
with TWRP_T865_3.3.1-10L.tar I'm getting error message again
Tronje said:
I tried all available firmware versions with different odin releases. It's always the same:
...
Click to expand...
Click to collapse
I just posted a solution here: https://forum.xda-developers.com/showpost.php?p=82229527&postcount=7
Moe5508 said:
I just posted a solution here: https://forum.xda-developers.com/showpost.php?p=82229527&postcount=7
Click to expand...
Click to collapse
That's great news. Now I got one step further.
For the first time there are some characters on the screen. (see attached file)
... but FAIL! (Auth)
persists
when I tried flashing BL-File
That's great indeed.
Now we get down to the firmware issues...it appears you might have upgraded to a higher BL one which may not allow you to downgrade BL)...might I suggest you try a different firmware?
And you are also already OEM Unlocked, right?
Was this round one of flashing BL, or round two, as per my guide? Please PM me and lets troubleshoot that way rather...
Moe5508 said:
That's great indeed.
Now we get down to the firmware issues...it appears you might have upgraded to a higher BL one which may not allow you to downgrade BL)...might I suggest you try a different firmware?
And you are also already OEM Unlocked, right?
Was this round one of flashing BL, or round two, as per my guide? Please PM me and lets troubleshoot that way rather...
Click to expand...
Click to collapse
display shows
FRP LOCK : OFF
OEM LOCK : OFF (U)
so I think I'm unlocked
I tried all German 4 firmware releases and I always failed in step 1
I got my device in november with october release and upgraded to december release
Here's the full log of Odin, it always shows the same result:
<ID:0/010> Added!!
<ID:0/010> Odin engine v(ID:3.1301)..
<ID:0/010> File analysis..
<ID:0/010> Total Binary size: 152 M
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> NAND Write Start!!
<ID:0/010> SingleDownload.
<ID:0/010> abl.elf
<ID:0/010> xbl.elf
<ID:0/010> FAIL! (Auth)
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I could try to lock the device, but probably no good idea?
what is strange:
when I try to install twrp recovery I'm getting message
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1401)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 0 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/007> Removed!!
but when I boot, there is no twrp recovery , only stock, nothing changed
Tronje said:
what is strange:
...
but when I boot, there is no twrp recovery , only stock, nothing changed
Click to expand...
Click to collapse
I think this is a TWRP issue then, and you can ask in the thread there...as far as I can recall with flashing TWRP, you must be quick again at first boot to NOT let the device boot fully...you need to boot directly into TWRP else the custom recovery won't stick...
Moe5508 said:
I think this is a TWRP issue then, and you can ask in the thread there...as far as I can recall with flashing TWRP, you must be quick again at first boot to NOT let the device boot fully...you need to boot directly into TWRP else the custom recovery won't stick...
Click to expand...
Click to collapse
Yes, I know. But I don't know what to do with twrp?
There seemes to be no operating system on the tab and there is no possibility to flash one from twrp. I flashed it just to see what would happen. It couldn't get worse.
What I need is a methode flashing by odin or something else with available firmware.
I only know odin. Is there something similar?
Tronje said:
I tried all available firmware versions with different odin releases. It's always the same:
<ID:0/010> Initialzation..
<ID:0/010>Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010> FAIL! (Auth)
<ID:0/010>
<ID:0/010> Re-Partition operation failed.
Trying to flash twrp recovery:
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> recovery.img
<ID:0/007> vbmeta.img
<ID:0/007> FAIL! (Auth)
<ID:0/007>
I really really would like to know where this FAIL! (Auth) comes from. But all google search brought solutions not fitting to my situation.
Few minutes ago it just let me flash TWRP_T865_3.3.1-9.tar without grumbling - but there is no twrp recovery, only stock
<ID:0/007> Odin engine v(ID:3.1301)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 0 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
with TWRP_T865_3.3.1-10L.tar I'm getting error message again
Click to expand...
Click to collapse
Sorry but I have to ask, why are you repartitioning anything? The only option you should touch in Odin from the options available on the left side of the screen is automatic reboot as far as I'm aware.
I would slow down and reread from the beginning.
1. Get all the correct firmware, double checking model and version numbers (is it SM-T860 or SM-T860N for example).
2. Prioritize your tasks and do them 1 at a time (get recovery working correctly, then install stock firmware, then if desired install TWRP OR root, one or the other, don't attempt to speed things up and try flashing 2 operations at once).
3. Reread what you are about to attempt before you start the process.
4. Don't try and improve on the instructions you are following, follow them exactly.
If you do the above I really can't see how you can go wrong.
Feel free to PM me any questions and if I can help I will.
Good luck brother
Sent from my [device_name] using XDA-Developers Legacy app
well i was excited to install android on my watch samsung gear sm-r750 so downloaded the rom and all the files needed , took a backup of my sysdata and everything was fine , flashed the custom recovery and i tried to boot in it and it worked then i tried flashing the cm12.1 that's when i got a huge prob , the clock got stuck at samsung logo , i waited and waited but it won't boot to system tried to go to recovery but even the recovery got stuck at the start blue screen , tried to restore the watch using restore to tizen file but when i try to flash i get this <ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 968 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> system-data.img
<ID:0/005> FAIL! (WP)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
i searched all over the internet for the official rom of the watch using the serial number and all the info but every time i try to flash a rom i fall into the same thing and it show the same thing anyone can help and i appreciate it for real i will provide u with everything u need
sm-r750
Click to expand...
Click to collapse
Can you search for SM-R750 Combination Firmware?
I have still limited time... here for instance:
https://shell.boxwares.com/default.aspx?DeviceModel=SM-R750&Type=All#fh5co-table
"We" need valid package... i can can remember trouble with corrupted downloads...
Please check for me...
Goal is to flash Combination Firmware and/or parts of it...
To see what is damaged...
Best Regards
adfree said:
Can you search for SM-R750 Combination Firmware?
I have still limited time... here for instance:
https://shell.boxwares.com/default.aspx?DeviceModel=SM-R750&Type=All#fh5co-table
"We" need valid package... i can can remember trouble with corrupted downloads...
Please check for me...
Goal is to flash Combination Firmware and/or parts of it...
To see what is damaged...
Best Regards
Click to expand...
Click to collapse
thanks well i was looking for the model and i found out that my watch is made in vietnam and bought from germany so downloaded germany package , tryied flashing every file but still no chance :/
tryied flashing every file but still no chance :/
Click to expand...
Click to collapse
Can we try to focus... on Combination Firmware?
Sorry I have only limited time and energy...
Goal is to bring back working OS...
Again.
A
Combination Firmware...
Give me Link what you have... or write Filename...
So we can research in same files...
WITHOUT force me to upload.
B
If you select/found/choose Combiantion Firmware... we can unpack repack...
Create new TAR files for Odin with less files...
I hope you know you can flash less files...
C
Bootloader seems okay...
Otherwise you can not flash...
But maybe PIT is wrong or something else is broken or Hardware damage...
It is not impossible that eMMC dies...
Best Regards
adfree said:
Can we try to focus... on Combination Firmware?
If you select/found/choose Combiantion Firmware... we can unpack repack...
Create new TAR files for Odin with less files...
I hope you know you can flash less files...
C
Bootloader seems okay...
Otherwise you can not flash...
But maybe PIT is wrong or something else is broken or Hardware damage...
It is not impossible that eMMC dies...
Best Regards
Click to expand...
Click to collapse
the combination firmwares i tryed were these 3 for model SM-R750 the 3 of them don't work start download then show error repartition
R750XXU1AOB1
R750XXU1AOB1
R750XXU2BOF1
the problem is that i only know the model of the watch but not whish firmware work with it , tried to find it using country but no chance anyway i'll tell u exactly what i tried , i tried all 4 parts rom that i found no one works, but back to the combination firmware , the problem is that i don't know whish security lvl it is , the only thing i found is the model number on the donwload screen :
odin mode
product name : SM-R750
current binary : custom
system status : official
qualcomm secureboot: enable
RP SWREV : S2 T1 R1 A1 P1
secure download : enable
Write protection : enable
when i download the rom nothing show on the screen of the watch except it starts loading and stop and in odin it shows the error , tried flashing a csc partition , the green bar reach the end then show fail
Code:
odin mode
product name : SM-R750
current binary : custom
system status : official
qualcomm secureboot: enable
RP [B]SWREV : S2[/B] T1 R1 A1 P1
secure download : enable
Write protection : enable
In this Mode we can see it is allready Software Revision 2 Bootloader on Device...
Remember Samsu.g Rollback Prevention Crap...
So 2 of 3 files are simple WRONG.
Code:
R750XXU[COLOR="Red"][B]1[/B][/COLOR]AOB1
R750XXU[COLOR="Red"][B]1[/B][/COLOR]AOB1
R750XXU[COLOR="Green"][B]2[/B][/COLOR]BOF1
Okay, I will download this file... so maybe we can proceed with tests...
All I know at the moment.. this is Qualcomm crap...
My QC times are long ago...
Best Regards
I have now this as reference...
Code:
COMBINATION-FTMA_R750XXU[COLOR="Green"][B]2[/B][/COLOR]BOF1_BoxWares.tar.zip
Code:
aboot.mbn
csc.img
dzImage
dzImage-recovery
modem.bin
modules.img
Ponte-EUR-OPEN-4G-v9.pit
ramdisk-recovery.img
rootfs.img
rpm.mbn
sbl1.mbn
sdi.mbn
system-data.img
tz.mbn
user.img
I have taken the csc.img and create TAR file...
Can you try to flash and report Odin Log?
Thanx in advance.
Best Regards
adfree said:
I have now this as reference...
Code:
COMBINATION-FTMA_R750XXU[COLOR="Green"][B]2[/B][/COLOR]BOF1_BoxWares.tar.zip
Code:
aboot.mbn
csc.img
dzImage
dzImage-recovery
modem.bin
modules.img
Ponte-EUR-OPEN-4G-v9.pit
ramdisk-recovery.img
rootfs.img
rpm.mbn
sbl1.mbn
sdi.mbn
system-data.img
tz.mbn
user.img
I have taken the csc.img and create TAR file...
Can you try to flash and report Odin Log?
Thanx in advance.
Best Regards
Click to expand...
Click to collapse
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> csc.img
<ID:0/005> FAIL! (WP)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and btw the download bar reached the end ( the green one )
adfree said:
I have now this as reference...
Code:
COMBINATION-FTMA_R750XXU[COLOR="Green"][B]2[/B][/COLOR]BOF1_BoxWares.tar.zip
Best Regards
Click to expand...
Click to collapse
well i have tried to make tar files of all the imgs inside the rom , somefiles like recovery and csc compleatly download before showing failed , the green bar reachs the end , for some files like rootfs and and system data it starts downloading then the green bar stuck at the beginning , can it be kind of a faulty partition ? odin can't find space to extract the tar files after downloading them so it fails
Sorry, nearly no time nor energy to spent toooo much time with your problem.
Suggestion.
Dump PIT file from Watch... Partition stuff...
As you have USB cable...
Try Tool Heimdall for instance...
https://forum.xda-developers.com/showthread.php?t=755265
Best Regards