Failed boot up after failed flash in Odin. - T-Mobile Samsung Galaxy Note 8 Questions & Answers

I was on DRL6 and Pie, and tried to do the CRK1 to DRL6 through Odin 3.13 Patched version, went into Odin mode on the phone. Added BL + AP + CP + HOME_CSC like the tutorial stated, Odin said (success 0 / failed 2), so I assumed I didn't have Samsung drivers installed, closed out of Odin and installed the drivers, rebooted Odin it seemed like it was going to work because it went further than the other tries but then it failed at "Complete(Write) operation failed."
I tried different cords, USB ports, turned off Firewall.
So, I figured I'd leave it alone, restarted my phone and it noticed it wouldn't reboot. I unplugged it, and held down the power button which booted up:
[UPLOAD MODE]
Unkown Error
----------------------
DDR Vendor: Samsung
SOC_HW_REVISION: 2.1
skip print_summary_to_lcd..
Generating summary...
>> General Info
>> DDR Info
>> RPM
>> TrustZone
>> Hypervisor
Done!
[To PC] Connect a USB cable or
[To SD] Press VOL_UP + VOL_DOWN
Click to expand...
Click to collapse
Tried Odin while in the mode and now this is what I'm getting:
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> dqmdbg.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 4907 M
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Edit: Got it into Download Mode, this is what I'm getting now.
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 4920 M
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Edit 2: Did some Googling, and seen that my cache could've been corrupted. So, I went back into Download mode, flashed just CSC in Odin, and my phone worked again. So, being stubborn, I flashed BL + AP + CP without CSC and my phone is now Optimizing App, then reboots and continues the cycle. I'm now back in Upload Mode and stuck, phone won't turn off or anything.
[UPLOAD MODE]
Unkown Error
DDR Vendor: Samsung
SOC_HW_REVISION: 2.1
RAM dump by hard reset
lastSns: 0x5a
Generating summary...
General Info
DDR Info
DCVS Info
Recovered from an exception
Done.
[To PC] Connect a USB cable or
[To SD] Press VOL_UP + VOL_DOWN
Synchronous Exceoption
lr: 0x0000000085e37228
sp: 0x000000001407bba0
pc: 0x0000000085e37288
Click to expand...
Click to collapse
Edit 3: Back to Optimizing and rebooting again. It goes to completion but then reboots back to the Samsung logo.

What phone do you have? I had a similar problem that is almost exactly as you described. I have an N950U1 but I flashed the T-Mobile firmware to mine a few months ago. I believe that was my problem but I could be wrong. I posted in another thread about this. https://forum.xda-developers.com/at...in-flash-to-note-8-specific-computer-t3883398 . I think I could have flashed the unlocked firmware, but I haven't tried to see if that is the solution.

Related

Odin Nand Erase All, Fail

Hi guys,
I have bricked my tablet, when i try to "Nand Erase All" it keeps failing, can someone explain the problem
Odin Log:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Erase...
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
---------------------------------------------------------------------
Status:
-Device: Galaxy Note 10.1 N8000, not rooted, Debugging mode disabled so no ADB:crying:
-Bootloop, No recovery mode, Can access Download mode:good:
----------------------------------------------------------------------
What I have tried so Far
- Removed the battery ( didn't work)
- Flashed bootloader --> (Flashed Successfully but didn't work)
- Flashed CWM recovery -->(Flashed Successfully, battery off then on, but didn't work, still cant access recovery mode)
- Flashed Stock firmware -->(Flashed Successfully but didn't work)
-Flashed (Stock/custom recovery) with Pit file re-partition checked --> (Repartitioned and Flashed Successfully but didn't work)
-I read about that I need to check "Nand Erase ALL" ( with Pit file on) to erase cache and every corrupted file
so I tried but I kept failing giving the error mentioned above, So any explanation why "Nand Erase All" fails, and any other suggestions for my current situation
Thanks in advance
scorpiohyena said:
Hi guys,
I have bricked my tablet, when i try to "Nand Erase All" it keeps failing, can someone explain the problem
Odin Log:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Erase...
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
---------------------------------------------------------------------
Status:
-Device: Galaxy Note 10.1 N8000, not rooted, Debugging mode disabled so no ADB:crying:
-Bootloop, No recovery mode, Can access Download mode:good:
----------------------------------------------------------------------
What I have tried so Far
- Removed the battery ( didn't work)
- Flashed bootloader --> (Flashed Successfully but didn't work)
- Flashed CWM recovery -->(Flashed Successfully, battery off then on, but didn't work, still cant access recovery mode)
- Flashed Stock firmware -->(Flashed Successfully but didn't work)
-Flashed (Stock/custom recovery) with Pit file re-partition checked --> (Repartitioned and Flashed Successfully but didn't work)
-I read about that I need to check "Nand Erase ALL" ( with Pit file on) to erase cache and every corrupted file
so I tried but I kept failing giving the error mentioned above, So any explanation why "Nand Erase All" fails, and any other suggestions for my current situation
Thanks in advance
Click to expand...
Click to collapse
Update:
currently I am using heimdall, Trying to create a Custom Pit to skip bad sectors in recovery and boot partitions, any experience in that would be helpfull.
I am trying to figure out the pit files parameter to create a custom working file
scorpiohyena said:
Update:
currently I am using heimdall, Trying to create a Custom Pit to skip bad sectors in recovery and boot partitions, any experience in that would be helpfull.
I am trying to figure out the pit files parameter to create a custom working file
Click to expand...
Click to collapse
Hi there did you had any success trying to unbrick your tablet ??, I'm experiencing the same issues as you.
I've a rooted Note 10.1 N8013 running on stock firmware.
I've tried everything, all left for me is trying "Nand erase all" . but it fails everytime
Thank you !!
hi gays
can you tell me if the problem of nand eras all fail was solved ?

[Firmware] Can't Ubrand phone-Stuck at Setup connection

Hello
Let's start saying the obvious things:
I'm using the official usb cable
I didinstalled kies and the driver,and installed the driver only package
I have antivirus off (did it out of safety)
I am in download mode with a black screen and downloading... yellow text
I'm using Odin 3.07 (Tried also with 3.12.5)
I tried different usb port and tried on my laptop too
I tried unplugging the battery,waiting 10 mins and
repeat everything (more than once)
I tried unplugging and replugging the usb cable,odin interrupt everything and just wait for prompt to restart again
I'm running widnows 7 32bit home,tried on windows 8 on laptop
So,i downloaded the itv file for the phone,unzipped them on desktop and did the same with odin.
I start my phone,send it in downloading mode,plug the cable,open odin.Odin finds the phone (Blue box,com 12).
I click on AP and select the firmware file tar.md5
I have Auto rebot and F. Reset time checked (Tried with the last one unchecked too).I do not have Re-partition checked. :crying::crying::crying:
This is the result:
Odin stuck lik This
4.0zz0 .com /2016/12/04/02/647480202.jpg
8.0zz0. com /2016/12/04/03/404301673.jpg
This is the result:
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection.. <-----Hangs for 5-10 mins
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My Phone: SAMSUNG GLAXY
Model: GT S7580
. Hope you'll help me. :laugh: :laugh:
Thank You

*** Impossible to access to Recovery mode ***

I am using a Samsung Galaxy Grand 2 smartphone series SM-G7102
The smartphone is rooted and it's already working on a Cyanogen ROM , using ROM of this thread : https://forum.xda-developers.com/galaxy-grand-2/orig-development/dev-preview-lollipop-galaxy-grand2-sm-t2949693
I am having troubles with some functionnalities using my phone, so I decided to install a new ROM (https://forum.xda-developers.com/galaxy-grand-2/orig-development/rom-resurrectionremix-v5-8-0-t3534403)
The problem is : I can never access to recovery mode, have used used : VOL UP+MENU+POWER || VOL DOWN+MENU+POWER
But it always goes to downloading mode
I have tried to install a CWM like included in this thread https://forum.xda-developers.com/showthread.php?t=1837605
It goes well and the phone reboots normally. Here's the Odin log :
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ODINRecovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
But when trying to boot into recovery mode, it always goes to download mode
Text included in Download mode :
Could not do normal boot.
ODIN MODE
PRODUCT NAME: SM-G7102
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A2, P2
UDC START
EDIT
The reason behind this wanted change is because the annoying appearance of these messages :
android.process.acore has stopped
Unfortunately, the process com.google.process.gapps has stopped.
I have disabled "Google Play services" & "Google Play Store" to prevent these messages from appearing again : I used substitutes instead like Yalp & F-droid : I have had a good time with my phone for months, but lately there appeared other annoying problems :
1- I can not activate WiFi !!
2- Whenever I use Camera there's : photos taken are black AND/OR not saved
3- I can never access galery
4- I can only go through the File Manager but I can no longer manipulate files : create directories ..
Any solutions for any of these problems please ??
ahmed_aek said:
I am using a Samsung Galaxy Grand 2 smartphone series SM-G7102
The smartphone is rooted and it's already working on a Cyanogen ROM
I am having troubles with some functionnalities using my phone, so I decided to install a new ROM (https://forum.xda-developers.com/ga...lopment/rom-resurrectionremix-v5-8-0-t3534403)
The problem is : I can never access to recovery mode, have used used : VOL UP+MENU+POWER || VOL DOWN+MENU+POWER
But it always goes to downloading mode
I have tried to install a CWM like included in this thread https://forum.xda-developers.com/showthread.php?t=1837605
It goes well and the phone reboots normally. Here's the Odin log :
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
ODINRecovery.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:5)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
recovery.img
NAND Write Start!!
RQT_CLOSE !!
RES OK !!
Removed!!
Remain Port .... 0
All threads completed. (succeed 1 / failed 0)
But when trying to boot into recovery mode, it always goes to download mode
Text included in Download mode :
Could not do normal boot.
ODIN MODE
PRODUCT NAME: SM-G7102
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A2, P2
UDC START
Click to expand...
Click to collapse
Try holding vol+, home, and power. Let off of power once the splash image shows up.
Sent from my KYOCERA-C6745 using Tapatalk
RealWelder said:
Try holding vol+, home, and power. Let off of power once the splash image shows up.
Sent from my KYOCERA-C6745 using Tapatalk
Click to expand...
Click to collapse
I DID , but nothing changed
Ha. Sorry, just posting because RealWelder's sig cracked me up - the Kyocera C6745 is what I totally expected this thread to be about when I saw the title, not a Samsung. (I swear it doesn't actually have a recovery, I don't care what the handful of people claiming to be able to boot the C6745 into it say...)
lugnut2099 said:
Ha. Sorry, just posting because RealWelder's sig cracked me up - the Kyocera C6745 is what I totally expected this thread to be about when I saw the title, not a Samsung. (I swear it doesn't actually have a recovery, I don't care what the handful of people claiming to be able to boot the C6745 into it say...)
Click to expand...
Click to collapse
I know this isn't the right place for this, but, the Hydro Air does have recovery... It's just stock though. The only way to get to it is to adb reboot recovery. The lack of root and recovery is why I use it as my daily... I don't know how many times I've soft-bricked my daily and had to be without a phone until I figured it out. Lol.
Sent from my KYOCERA-C6745 using Tapatalk

Stuck on Samsung Logo, No Recovery, No charge..(SM-G955U)

I have a Galaxy S8+ (SM-G955U).
After a few days it was working just fine, then suddenly after I let it die out of charge, it did not turn on. During this state, the phone was rooted.
First, the Issue was loading into Download mode (still happening), it loads but the screen is black. I use Odin so it tells me when the Pc recognize it, and it does. I tried flashing stock ROM with Odin but it stays on setup and if not it stays on Initializing forever, now the problem is a bit easier to solve because it just stays stuck on the Samsung Logo. Odin Recognizes my device but doesn't flash anything. It says on analysis forever and if it continues to setup connection it stays there for 15-20 minutes . It fails. <OSM> All threads completed ( succeed 0 / failed 1).
I can only boot to Download Mode nothing else. Not even Recovery Mode.
Not sure if this matters but this is my full model
SM-G955UZKATMB ( Tried finding this exact firmware but no luck.
I don't have a recovery mode for some reason it won't boot to this mode only Download mode.
Not sure if this matter but it doesn't charge either, it stays on the charging state, a blank circle with a thunderbolt symbol inside.
IF anyone has any idea or hint of what I can do, please comment.
Thanks again.
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis.. (TAKES A WHILE)
<ID:0/009> skip file list for home binary
<ID:0/009> apdp.mbn
<ID:0/009> msadp.mbn
<ID:0/009> persist.img.ext4
<ID:0/009> Home Binary Download
<ID:0/009> SetupConnection.. (TAKES DOUBLE THE WHILE)
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Maybe more expertise is available here: https://forum.xda-developers.com/galaxy-s8+
zen2o1 said:
I have a Galaxy S8+ (SM-G955U).
After a few days it was working just fine, then suddenly after I let it die out of charge, it did not turn on. During this state, the phone was rooted.
First, the Issue was loading into Download mode (still happening), it loads but the screen is black. I use Odin so it tells me when the Pc recognize it, and it does. I tried flashing stock ROM with Odin but it stays on setup and if not it stays on Initializing forever, now the problem is a bit easier to solve because it just stays stuck on the Samsung Logo. Odin Recognizes my device but doesn't flash anything. It says on analysis forever and if it continues to setup connection it stays there for 15-20 minutes . It fails. <OSM> All threads completed ( succeed 0 / failed 1).
I can only boot to Download Mode nothing else. Not even Recovery Mode.
Not sure if this matters but this is my full model
SM-G955UZKATMB ( Tried finding this exact firmware but no luck.
I don't have a recovery mode for some reason it won't boot to this mode only Download mode.
Not sure if this matter but it doesn't charge either, it stays on the charging state, a blank circle with a thunderbolt symbol inside.
IF anyone has any idea or hint of what I can do, please comment.
Thanks again.
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis.. (TAKES A WHILE)
<ID:0/009> skip file list for home binary
<ID:0/009> apdp.mbn
<ID:0/009> msadp.mbn
<ID:0/009> persist.img.ext4
<ID:0/009> Home Binary Download
<ID:0/009> SetupConnection.. (TAKES DOUBLE THE WHILE)
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You need to use latest firmware for example this one :
https://samfrew.com/download/Galaxy__S8+__/hsjp/TMB/G955USQU5DSD3/G955UOYN5DSD3/
Use slow download and IDM manager ...
After that extract firmware and flash with Odin ...

flash odin failed

well i was excited to install android on my watch samsung gear sm-r750 so downloaded the rom and all the files needed , took a backup of my sysdata and everything was fine , flashed the custom recovery and i tried to boot in it and it worked then i tried flashing the cm12.1 that's when i got a huge prob , the clock got stuck at samsung logo , i waited and waited but it won't boot to system tried to go to recovery but even the recovery got stuck at the start blue screen , tried to restore the watch using restore to tizen file but when i try to flash i get this <ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 968 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> system-data.img
<ID:0/005> FAIL! (WP)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
i searched all over the internet for the official rom of the watch using the serial number and all the info but every time i try to flash a rom i fall into the same thing and it show the same thing anyone can help and i appreciate it for real i will provide u with everything u need
sm-r750
Click to expand...
Click to collapse
Can you search for SM-R750 Combination Firmware?
I have still limited time... here for instance:
https://shell.boxwares.com/default.aspx?DeviceModel=SM-R750&Type=All#fh5co-table
"We" need valid package... i can can remember trouble with corrupted downloads...
Please check for me...
Goal is to flash Combination Firmware and/or parts of it...
To see what is damaged...
Best Regards
adfree said:
Can you search for SM-R750 Combination Firmware?
I have still limited time... here for instance:
https://shell.boxwares.com/default.aspx?DeviceModel=SM-R750&Type=All#fh5co-table
"We" need valid package... i can can remember trouble with corrupted downloads...
Please check for me...
Goal is to flash Combination Firmware and/or parts of it...
To see what is damaged...
Best Regards
Click to expand...
Click to collapse
thanks well i was looking for the model and i found out that my watch is made in vietnam and bought from germany so downloaded germany package , tryied flashing every file but still no chance :/
tryied flashing every file but still no chance :/
Click to expand...
Click to collapse
Can we try to focus... on Combination Firmware?
Sorry I have only limited time and energy...
Goal is to bring back working OS...
Again.
A
Combination Firmware...
Give me Link what you have... or write Filename...
So we can research in same files...
WITHOUT force me to upload.
B
If you select/found/choose Combiantion Firmware... we can unpack repack...
Create new TAR files for Odin with less files...
I hope you know you can flash less files...
C
Bootloader seems okay...
Otherwise you can not flash...
But maybe PIT is wrong or something else is broken or Hardware damage...
It is not impossible that eMMC dies...
Best Regards
adfree said:
Can we try to focus... on Combination Firmware?
If you select/found/choose Combiantion Firmware... we can unpack repack...
Create new TAR files for Odin with less files...
I hope you know you can flash less files...
C
Bootloader seems okay...
Otherwise you can not flash...
But maybe PIT is wrong or something else is broken or Hardware damage...
It is not impossible that eMMC dies...
Best Regards
Click to expand...
Click to collapse
the combination firmwares i tryed were these 3 for model SM-R750 the 3 of them don't work start download then show error repartition
R750XXU1AOB1
R750XXU1AOB1
R750XXU2BOF1
the problem is that i only know the model of the watch but not whish firmware work with it , tried to find it using country but no chance anyway i'll tell u exactly what i tried , i tried all 4 parts rom that i found no one works, but back to the combination firmware , the problem is that i don't know whish security lvl it is , the only thing i found is the model number on the donwload screen :
odin mode
product name : SM-R750
current binary : custom
system status : official
qualcomm secureboot: enable
RP SWREV : S2 T1 R1 A1 P1
secure download : enable
Write protection : enable
when i download the rom nothing show on the screen of the watch except it starts loading and stop and in odin it shows the error , tried flashing a csc partition , the green bar reach the end then show fail
Code:
odin mode
product name : SM-R750
current binary : custom
system status : official
qualcomm secureboot: enable
RP [B]SWREV : S2[/B] T1 R1 A1 P1
secure download : enable
Write protection : enable
In this Mode we can see it is allready Software Revision 2 Bootloader on Device...
Remember Samsu.g Rollback Prevention Crap...
So 2 of 3 files are simple WRONG.
Code:
R750XXU[COLOR="Red"][B]1[/B][/COLOR]AOB1
R750XXU[COLOR="Red"][B]1[/B][/COLOR]AOB1
R750XXU[COLOR="Green"][B]2[/B][/COLOR]BOF1
Okay, I will download this file... so maybe we can proceed with tests...
All I know at the moment.. this is Qualcomm crap...
My QC times are long ago...
Best Regards
I have now this as reference...
Code:
COMBINATION-FTMA_R750XXU[COLOR="Green"][B]2[/B][/COLOR]BOF1_BoxWares.tar.zip
Code:
aboot.mbn
csc.img
dzImage
dzImage-recovery
modem.bin
modules.img
Ponte-EUR-OPEN-4G-v9.pit
ramdisk-recovery.img
rootfs.img
rpm.mbn
sbl1.mbn
sdi.mbn
system-data.img
tz.mbn
user.img
I have taken the csc.img and create TAR file...
Can you try to flash and report Odin Log?
Thanx in advance.
Best Regards
adfree said:
I have now this as reference...
Code:
COMBINATION-FTMA_R750XXU[COLOR="Green"][B]2[/B][/COLOR]BOF1_BoxWares.tar.zip
Code:
aboot.mbn
csc.img
dzImage
dzImage-recovery
modem.bin
modules.img
Ponte-EUR-OPEN-4G-v9.pit
ramdisk-recovery.img
rootfs.img
rpm.mbn
sbl1.mbn
sdi.mbn
system-data.img
tz.mbn
user.img
I have taken the csc.img and create TAR file...
Can you try to flash and report Odin Log?
Thanx in advance.
Best Regards
Click to expand...
Click to collapse
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> csc.img
<ID:0/005> FAIL! (WP)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and btw the download bar reached the end ( the green one )
adfree said:
I have now this as reference...
Code:
COMBINATION-FTMA_R750XXU[COLOR="Green"][B]2[/B][/COLOR]BOF1_BoxWares.tar.zip
Best Regards
Click to expand...
Click to collapse
well i have tried to make tar files of all the imgs inside the rom , somefiles like recovery and csc compleatly download before showing failed , the green bar reachs the end , for some files like rootfs and and system data it starts downloading then the green bar stuck at the beginning , can it be kind of a faulty partition ? odin can't find space to extract the tar files after downloading them so it fails
Sorry, nearly no time nor energy to spent toooo much time with your problem.
Suggestion.
Dump PIT file from Watch... Partition stuff...
As you have USB cable...
Try Tool Heimdall for instance...
https://forum.xda-developers.com/showthread.php?t=755265
Best Regards

Categories

Resources