[Kernel][lux] Ultra Kernel for Moto X Play for 6.0.X[R5] - X Play Original Android Development

This is Ultra Kernel for Moto X Play, it is based in the sources of @squid2 with all his changes and the Ultra changes, behind of some cherry-picks of great devs.
Note:
This Kernel is only for Moto X Play (lux), I am not responsible of bricked devices. Flash at your own risk.
SquidKernel original features:
LED notification support
Moderately undervolted
Updated to Linux 3.10.94
Synced with latest CodeAurora changes
Improved memory management
Improved VMA caching backported from Linux 3.15
Optimized ARM crypto routines
Updated f2fs and WiFi drivers
FIOPS and BFQ I/O schedulers
Lionfish CPU governor
ClusterPlug big.LITTLE hotplug (designed for MSM8939)
KCAL MDP5 colour control (by savoca)
Improved zRAM backported from Linux 4.1
Compiled with Linaro GCC 5.1 and optimized for Cortex A53
Stripped down and optimized configuration
For see more of SquidKernel, check the post. Link
Ultra Kernel features
Builded with Archidroid 5.2 GCC (NEW)
WiFi drivers update
Pipe flag and Optimization Level -03
Optimize apply slack
Some optimizations for adreno files and tweaks ratio
Optimize SLUB
Reduce latencies in Kernel
IO Sched deadline tweaked
Added some governors
intelliactive
smartass2
bluactive
interactive_pro
smartmax
Release history:
Code:
r1: January 13 2016
-Initial build
r2b: February 01 2016
-Sync with lastest changes SquidKernel r14b
-mm:don't wait for high-order page allocation
-Updated wlan drivers
-PM / Wakeup: Use rcu callbacks for better performance
r3: February 09 2016
-Builded with Uber TC 5.2 GCC
-Added adreno idler for good work of msm adreno
-Wlan.ko is update and stripped
-Added LCD Notify and Powersuspend 1.7 (thanks to faux123)
-More support of Flags Level -03
-Up to date to SquidKernel r15
-Network speed tweak
r4: March 28, 2016
-Started with base fresh of SquidKernel r16
-Optimized some task for help to the performance
-Improves on SLUB
-Updated wlan.ko driver
-All changes of Squid Kernel r16
-Added 3 new governors:
-Barry Allen
-Alucard
-Bioshock
r5: March 28, 2016
-Overclock to GPU 700 MHz
-Added MSM Hotplug
-Added 2 I/O Shed:
-ZEN
-TRIPNDROID
-Reduce wakelocks
-Allow 320K encoding
-Disable crc software (MORE FAST)
-Enable ARCH POWER
Download:
r1
r2b
r3
r4
r5
Installation Instructions:
Flash the zip downloaded with TWRP and enjoy.
Thanks to:
@squid2 for his Kernel base and testing (special friend)
@GitHub
@xda developers
@AnoopKumar
XDA:DevDB Information
Ultra Kernel, Kernel for the Moto X Play
Contributors
TechnoAnder, squid2
Source Code: https://github.com/Ander-Alvarez/android_kernel_motorola_msm8916-1
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R5
Stable Release Date: 2016-03-28
Created 2016-01-13
Last Updated 2016-03-28

Firts build
This build have excellent changes for the battery life and performance good, because this Kernel have fine features, as more governors and the using of different Toolchain in this case (GCC 5.2), @squid2 tested the Kernel and it is working perfectly, I hope that my work like to you.
Cheers.

Flashing, Thanks a lot
---------- Post added at 10:26 PM ---------- Previous post was at 09:50 PM ----------
In about phone, kernel version shows "unavailable" it works perfectly for the rest
Sent from my XT1562 using Tapatalk

GtrCraft said:
Flashing, Thanks a lot
---------- Post added at 10:26 PM ---------- Previous post was at 09:50 PM ----------
In about phone, kernel version shows "unavailable" it works perfectly for the rest
Sent from my XT1562 using Tapatalk
Click to expand...
Click to collapse
Yes, I found that issue, but in the proxim release I will try fix it, thanks for you report. Cheers.

Would it be possible to add the smartmax_eps powersave governor from the nexus4 taurus kernel? So far everything is running fine here, thank you

Can I use this Kernel in based CM13 ROM's like (RR, Temasek, CrDroid) or CM13 only?

Benjamin_L said:
Would it be possible to add the smartmax_eps powersave governor from the nexus4 taurus kernel? So far everything is running fine here, thank you
Click to expand...
Click to collapse
I will try add it, cheers.

ToninhoTavares said:
Can I use this Kernel in based CM13 ROM's like (RR, Temasek, CrDroid) or CM13 only?
Click to expand...
Click to collapse
This Kernel work on any ROM MarshMallow 6.0.x

One more question @TechnoAnder, I'm very noob in this topic... I'm downloading the Temasek's CM13 ROM to test it, can I flash the Kernel right after flash the ROM + Gapps or just after the ROM is totally configured (boot + optimizing apps)?
Sorry my English and thanks for the help.

ToninhoTavares said:
One more question @TechnoAnder, I'm very noob in this topic... I'm downloading the Temasek's CM13 ROM to test it, can I flash the Kernel right after flash the ROM + Gapps or just after the ROM is totally configured (boot + optimizing apps)?
Sorry my English and thanks for the help.
Click to expand...
Click to collapse
Just you must install the ROM and GApps, reboot normally and when you set all reboot into TWRP and flash the Kernel.

TechnoAnder said:
This is Ultra Kernel for Moto X Play, it is based in the sources of @squid2 with all his changes and the Ultra changes, behind of some cherry-picks of great devs.
Note:
This Kernel is only for Moto X Play (lux), I am not responsible of bricked devices. Flash at your own risk.
SquidKernel original features:
LED notification support
Moderately undervolted
Updated to Linux 3.10.94
Synced with latest CodeAurora changes
Improved memory management
Improved VMA caching backported from Linux 3.15
Optimized ARM crypto routines
Updated f2fs and WiFi drivers
FIOPS and BFQ I/O schedulers
Lionfish CPU governor
ClusterPlug big.LITTLE hotplug (designed for MSM8939)
KCAL MDP5 colour control (by savoca)
Improved zRAM backported from Linux 4.1
Compiled with Linaro GCC 5.1 and optimized for Cortex A53
Stripped down and optimized configuration
For see more of SquidKernel, check the post. Link
Ultra Kernel features
Builded with Archidroid 5.2 GCC (NEW)
WiFi drivers update
Pipe flag and Optimization Level -03
Optimize apply slack
Some optimizations for adreno files and tweaks ratio
Optimize SLUB
Reduce latencies in Kernel
IO Sched deadline tweaked
Added some governors
intelliactive
smartass2
bluactive
interactive_pro
smartmax
Release history:
Code:
r1: January 13 2016
-Initial build
Download:
r1
Installation Instructions:
Flash the zip downloaded with TWRP and enjoy.
Thanks to:
@squid2 for his Kernel base and testing
@GitHub
@xda developers
@AnoopKumar
XDA:DevDB Information
Ultra Kernel, Kernel for the Moto X Play
Contributors
TechnoAnder, squid2
Source Code: https://github.com/Ander-Alvarez/android_kernel_motorola_msm8916-1
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: r1
Stable Release Date: 2016-01-13
Created 2016-01-13
Last Updated 2016-01-13
Click to expand...
Click to collapse
Thank for the kernel. Flashing and trying out new governors on CM13.

Can I use this kernel with stock based 6.0 Marshmallux rom?

@TechnoAnder, could you make the voltage settings configurable by apps, like kernel adiutor?

ViperX85 said:
Can I use this kernel with stock based 6.0 Marshmallux rom?
Click to expand...
Click to collapse
Not yet

Which partitions can be f2fs formatted?

ViperX85 said:
Can I use this kernel with stock based 6.0 Marshmallux rom?
Click to expand...
Click to collapse
Nope.

carl_oak said:
Nope.
Click to expand...
Click to collapse
But he said it will work on any Marshmallow rom
This post http://forum.xda-developers.com/showthread.php?p=64795178
Sent from my XT1562 using Tapatalk

K.khiladi said:
But he said it will work on any Marshmallow rom
This post http://forum.xda-developers.com/showthread.php?p=64795178
Sent from my XT1562 using Tapatalk
Click to expand...
Click to collapse
Use squids kernel from r13 on. This one doesnt have the necessary changes. Squid took the moto g kernel sources to make it compatible with stock. or wait until they are merged here

ViperX85 said:
Can I use this kernel with stock based 6.0 Marshmallux rom?
Click to expand...
Click to collapse
No, soon I'll update the Kernel with support for MARSHMALLOW.

Added to index
[INDEX] [MOTO X Play]

Related

[Kernel][CM12][SM] Ark Kernel [per Core control]

Ark Kernel
Feal the Magic
This Kernel is based on a highly patched source and should work with latest CM11 nightlies and all CM12 builds.
Features
For Featurerequests please use tab on the top of this project
Overall
highly patched source
Hotplug
Alucard Hotplug <- default
MSM Hotplug
Intelli Plug 5.0
CPU
CPU Govs - set per Core
CPU Freq - set per Core
268 MHz step
Voltage Control
MSM Turbo
new CPU Boost
more CPU Govs
default: interactive
GPU
GPU OC up to 657 MHz
more GPU steps: 27 - 100 - 200 - 330 - 382 - 462 - 533 - 578
Idle down to 27 MHz
Thermal
Franco's Thermal
FS
Dyn_Fsync
FSync Switch
F2FS
NTFS support
Optimized EXT4
IO
more IO Scheduler
default: row
Sound
Sound Control
POWER
Powersuspend
FastCharge
Power efficient workqueue
Arch Power
LCD
LCD KCAL
NET
more TCP Congs
default: cubic
MISC
KSM
MultiRom Support (Kexec Hardboot)
Sync with CM
COMPILE
Any Kernel Installer
vfp hardfloat
Compiled with SM 4.9.3 with A15 optimization and graphite
Bug Reports
For Bug Reports please use tab on the top of this project and let me know your Rom. Only reports with full "last_kmsg" will be observed.
Download
Note: To use all the features it is recommend to flash my UKM and use Synapse App to setup.
For Download -> see Changelog <- version number is link
XDA:DevDB Information
[Kernel][CM12][SM] Ark Kernel [per Core control], Kernel for the ONEPLUS ONE
Contributors
AuxXxilium
Source Code: https://github.com/AuxXxilium/android_kernel_oneplus_msm8974
Kernel Special Features: per Core control
Version Information
Status: No Longer Updated
Current Stable Version: 0.7
Stable Release Date: 2014-11-20
Current Beta Version: 0.8.exp.1
Beta Release Date: 2014-11-20
Created 2014-10-18
Last Updated 2014-12-04
Changelog, Informations and more
Changelog - Kernel
0.7
camera fix from cyanogen
intelli_plug 5.0
wheatly cpu gov
new touch driver
msm_limiter fix freq
268MHz CPU step
GPU OC
irq patches
sched patches
qseecom patches
crypto patches
cifs patches
nfs patches
misc arm patches
Hyper CPU Gov
nightmare CPU Gov
darkness CPU Gov
Bacon CPU Gov updated
some changes in cpufreq calculation
vfp hardfloat
kernel mode neon
arch power
cpuidle patched
clockevents patched
time patched
tick patched
pm patched
rtmutex patched
tracer disabled
some I/O boost
sweep2sleep
0.6.3
synced with cm
0.6.2
intelli cpu govs added
some fixes
0.5.2 update
video recording fix
faux sound control removed and added francos
vr and zen added
other patches
0.4
reverted all 0.3.6 / 0.3.8 patches <- not stable for me, causes kernel panic
0.3.8
EXT4 patches
0.3.6
workqueue patches
bugfix
0.3.3
init build
Changelog - UKM
UKM_3.5.3_aux
remove unsupported features
UKM_3.5.2_aux
little style changes
UKM_3.5.1_aux
match with latest changes
UKM_3.5_aux
update to new version
UKM_3.4.3.12_aux
reenable sound control
UKM_3.4.3.11_aux
exclude unsupported things
UKM_3.4.3.10_aux
init build
Installation
Clean Install (if you use this kernel first time or you switch from ANY-AV to AV or back- recommend)
Download ROM / GAPPS / Kernel
Boot into Recovery
wipe System
install Rom
install Gapps
install Kernel
install UKM
Reboot into System
If finished please reboot again
Only Update
Download Kernel
Boot into Recovery
install Kernel
install UKM
Reboot into System
If finished please reboot again
Thanks & Credits
Cyanogenmod
ak
neobuddy89
ktoonsez
faux123
franciscofranco
showp1984
faux123
stratosk
mrg666
many other
Changelog Information and more
clean
Good to see more kernels.
Am I seeing more Kernels? Yes I am...
Great, welcome here.
Sent from my A0001 using Tapatalk
Multi-rom compatible ?
@AuxXxilium, you might want to be a bit more specific about what this kernel is compatible with. Saying 'this kernel is only for Cyanogenmod' isn't specific enough, there are CM11 and CM11S for this device, both Cyanogenmod, but require different kernels.
Transmitted via Bacon
---------- Post added at 10:56 AM ---------- Previous post was at 10:50 AM ----------
Added to OnePlus One index thread:
[INDEX] OnePlus One Resources Compilation Roll-Up
Transmitted via Bacon
<3 @AuxXxilium is here!
Awesome. Great to see more devs here.
Nice work! Might give this a try!
Any other mirror please? Not able to download at all..
please support slide2wake & slide2sleep !!!!
timmaaa said:
@AuxXxilium, you might want to be a bit more specific about what this kernel is compatible with. Saying 'this kernel is only for Cyanogenmod' isn't specific enough, there are CM11 and CM11S for this device, both Cyanogenmod, but require different kernels.
Transmitted via Bacon
---------- Post added at 10:56 AM ---------- Previous post was at 10:50 AM ----------
Added to OnePlus One index thread:
[INDEX] OnePlus One Resources Compilation Roll-Up
Transmitted via Bacon
Click to expand...
Click to collapse
It's based on latest nightly Kernel.
Stylez Ray. said:
Any other mirror please? Not able to download at all..
Click to expand...
Click to collapse
Coming soon with stable release.
AuxXxilium said:
It's based on latest nightly Kernel.
Click to expand...
Click to collapse
Cool, thanks for the reply, and for clarifying that in the OP.
Transmitted via Bacon
nexgen999 said:
Multi-rom compatible ?
Click to expand...
Click to collapse
implemented now but not tested.
Stylez Ray. said:
Any other mirror please? Not able to download at all..
Click to expand...
Click to collapse
uploaded latest to xda downloads of the thread. please report if you can not download there.
Could you make a Cm11s version? I wan't to try your kernel.
Sent from my A0001 using Tapatalk
mdv53 said:
Could you make a Cm11s version? I wan't to try your kernel.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Franco means this:
r24 (or newer) IS ONLY FOR CM11S 38R OR NEWER. DON'T FLASH IF YOU'RE IN OLDER OTA VERSIONS.
IF YOU'RE ON CM11 NIGHTLIES OR DERIVATES YOU'RE FINE
Click to expand...
Click to collapse
so i don't know, it can be working with latest CM11S. i think they change only the ramdisk. make backup and try it.
About to download a cm11 nightly and try this kernel on multi ROM.
Thanks for your work
How to config this rom?

[kernel][LP AOSP&TW] Amplitude Kernel 0.4.2 + Config Tool (F, P, M, W8, I)

Amplitude Kernel for Galaxy S5
I am not responsible for any damage to your phone.
Read before downloading or posting in the thread:
Proceed with caution if you have no experience. This kernel has been tested in G900F, G900M, G900P, G900W8, G900T, G900I and G900H (Thanks to @MOKIAAA for testing), but must work on almost every variant.
As the title says is for Lollipop & KK and is based on the CM12 & 12.1, the touchwiz version is based on the samsung sources
I will be thankful if some kernel master teach me more, that way I can advance faster and add better functionality. :fingers-crossed:
To download the kernel visit the DOWNLOADS section HERE
DOWNLOAD THE LATEST VERSION HERE (Thanks to androidfilehost.com)
Amplitude 4.2 TW
Amplitude 4.2 AOSP
Amplitude 4.2 AOSP 5.1
[INSTALL STEP-BY-STEP]
Copy the ZIP in your SDCARD
Reboot into TWRP recovery
Flash the kernel
Wipe Dalvik & Cache
Enjoy!​
Contributors
zparallax, faux123 * The kernel master *
Team CyanogenMod for his wonderful source
And any other developer that have contributed to the CM project or to the development of governors, scheduler or any other developer not mentioned (if you want me to include your credits I will)
[THANKS] to all devs on XDA and the great XDA team
Source Code:
- AOSP
- TW
Kernel Features:
- Added my own Governor (WAVE), based on Conservative with some tweaks for speed and battery
- Based on Linux kernel version 3.4.106+
- Built with Linaro Toolchain 4.9.3
- Alucard Hotplug (by alucard), Mako Hotplug (by franciscofranco), Intelliplug (by faux123), bricked hotplug (by showp1984)
- MP Decision back
- Power Suspend (by faux)
- Intelli thermal (by faux123)
- GOVs: Intelliactive, Intellimm, Optimax, OnDemand, Interactive, Userspace, Powersave, Performance, Conservative, Smartass2, nightmare, smartmax (requested by abelavila), Hyper
- IO SCHEDs: NOOP, Deadline, ROW, CFQ, etc.
- TCP Congestion: Westwood, Reno, Bic, Cubic, Highspeed, etc.
- Voltage control
- Gamma Control (by savoca)
- Rebased to 3.4.106
- Added several tweaks and several optimizations
Version Information
Status: RC
Current Version: Amplitude 0.4.1
Release Date: 2015-04-10
Created 2015-01-31
Last Updated 2015-04-10
XDA:DevDB Information
[kernel][LP AOSP(5.0&5.1) &TW] Amplitude Kernel, Kernel for the Samsung Galaxy S 5
Contributors
zparallax
Source Code: https://github.com/zparallax/
Kernel Special Features: Serveral governors to choose, several IO Scheds, Serveral tweaks
Version Information
Status: Stable
Current Stable Version: 0.4.1
Stable Release Date: 2015-04-10
Current RC Version: 0.4.2
Beta Release Date: 2015-04-26
XDA:DevDB Information
[kernel][LP AOSP&TW] Amplitude Kernel, Kernel for the Samsung Galaxy S 5
Contributors
zparallax
Source Code: https://github.com/zparallax/
Kernel Special Features: Serveral governors to choose, several IO Scheds, Serveral tweaks
Version Information
Status: Stable
Current Stable Version: 0.4.2
Stable Release Date: 2015-04-26
Current Beta Version: 0.4.2
Beta Release Date: 2015-04-26
Created 2015-02-06
Last Updated 2015-04-26
Reserved
Tested (and working) ROMs with this kernel
- BlissPop
- Euphoria OS
- Fusion
- CM12
- Temasek
- AICP
- Resurrection Remix
- CrDroid
- SOKP
And almost any CM12 or AOSP rom out there must work with this kernel
- XtreStoLite :highfive:
- Alliance Thanks @cranio84
- Wanam Lite Thanks @cranio84
- AMBASADII ROM Thanks @cranio84
- ALEXNDR
- JoelDroid Thanks to my bro @Sock12345
- Zombie ROM Thanks to my bro @Sock12345
Other TW Roms must work too
Reserved
For changelog
v0.4.2
- Added a new compression
- Added several cpuidle fixes
- Added sound control
- Changed to compile with (SaberNaro Thanks to frap129)
- Some other tweaks
v0.4.1
- Added bricked hotplug
- Added ramdisk update to BOC7
- Added several other fixes
v0.4.0
- Added Intelliplug 4
- Added PowerSuspend 1.6
- Added Screen Functions (S2W, S2S, DT2W) (thanks ktoonsez)
- Added a bunch of fixes
- Added a bunch of optimizations on the makefile
v0.3.3
- Android 5.1
- Backport for PKSM
- Several tweaks!
v0.3.2
- Added my governor WAVE
- Added some tweaks
v0.3.1
- Rebased to linux 3.4.106
- Added multiple optimizations
- Better battery life (Hopefully)
- UKM 3.8.1
v0.3.0
- Removed Intelliplug, for some reason is causing a slowdown in the whole kernel (checking this)
- Removed Faux Sound (You can use your own Sound Hack)
- Added Hyper
- Tweaked Mako and Alucard (Speed again)
- Resolved the TW slowdown (Checked with XtreSto, great battery life BTW)
- Some other tweaks (UKSM, thanks to Guneet... Some others)
v0.2.5
- Added new UKM version
- Show available freqs
- F2FS... Once again
- Some other tweaks... Maybe more faster
v0.2.4
- Permissive... Finally
- Added Intelliplug
- Added PowerSuspend (HI battery... Welcome!)
- Fixed Synapse Min Freq. (Hopefully)
- Disabled MP Decision
- Some other tweaks!
v0.2.3
- Permissive (it's working?)
- Added Gamma Control
- Added Fast Charge
- Some other tweaks
v0.2.2
- Reworked from scratch
- Intelliplug and MP Decision
- Removed GOVs, let's see if it's more stable
- Removed Intellithermal, rework too
- Added several tweaks
- F2FS support
- Fastcharge is suposed to work
- Some other tweaks
v0.2.1
- Removed the MP Decision, let's try only with Intelliplug to make it more stable
- Added several tweaks, maybe it will be more faster and battery friendly, overall perfomance improved (?), need feeback, maybe placebo effect
- F2FS support
- Done several stability tests, just to make sure no RR... Have one but never found the issue
- Added some more flags in defconfig to allow kernel panic log and better debug
- Some other tweaks
v0.2.0
- Corrected intelliplug by Faux
- Corrected voltaje for TW (Now you can tweak freely)
- Added MSM MP_Decision (BY showp1984)
- Some other tweaks
v0.1.5:
- Corrected the UI stopped working error
- Removed Intelliplug (Somehow it's breaking things)
- Added Mako Hotplug (By franciscofranco)
- Added fastcharge
- Added CPU boost
- Some other tweaks
v0.1.4:
- Added governors Intellidemand (as requested by abelavila), ZZMove (as requested by Gentilsatan), optimax, smartassv2
- Removed some governors (they need a little more of work to be ported)
- Removed fastcharge, need to rework the code
- Optimized and more battery friendly
v 0.1.3:
- Added fastcharge
- Added voltage control
- Fixed FauxSound in TW version (thank you @non4 for notice that)
v. 0.1.2:
- Added several governors: lulzactiveq, lulzactive, preservative, adaptive, nightmare
- Added stratosk Dynamic Hotplug
v. 0.1.1:
- Added several IO Scheds: FIFO, FIOPS, VR, ZEN, SIO
- Added three new GOVs: Lagfree, Smartass2, Lulzactive
- Commited several other tweaks (build rules, libraries, etc)
You also gonna build 1 for TW??
I will think about it
Sock12345 said:
You also gonna build 1 for TW??
Click to expand...
Click to collapse
Hi Sock12345:
I will think about it, since I have the source code from Samsung for LP I can add the same functionality that this have.
Thank you for your interest!
zparallax said:
Hi Sock12345:
I will think about it, since I have the source code from Samsung for LP I can add the same functionality that this have.
Thank you for your interest!
Click to expand...
Click to collapse
Sweeeet, hope you will build it for TW also ^_^
Sock12345 said:
Sweeeet, hope you will build it for TW also ^_^
Click to expand...
Click to collapse
+1
Sent from my SM-G900F using XDA Free mobile app
Piretia said:
+1
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
+2
Sent from my SM-G900T using Tapatalk 2
Hi everyone:
Some benchmarks... And now trying to build for TW.
Best!!
zparallax said:
Hi everyone:
Some benchmarks... And now trying to build for TW.
Best!!
Click to expand...
Click to collapse
That sure is a nice score ^_^
How is battery life so far?
When you have the TW one your gonna release it for everyone to test? or just some people to test?
Sock12345 said:
That sure is a nice score ^_^
How is battery life so far?
When you have the TW one your gonna release it for everyone to test? or just some people to test?
Click to expand...
Click to collapse
Hi Sock12345:
I just forgot to take an screenshot but it has working fine so far since yesterday (I will put some screens tomorrow once the kernel is stable), right now testing some other things like new governorns and stuff.
I will release the TW kernel in this thread as soon as it's ready, anyone is invited to test. :victory:
Best!
zparallax said:
Hi Sock12345:
I just forgot to take an screenshot but it has working fine so far since yesterday (I will put some screens tomorrow once the kernel is stable), right now testing some other things like new governorns and stuff.
I will release the TW kernel in this thread as soon as it's ready, anyone is invited to test. :victory:
Best!
Click to expand...
Click to collapse
Sweeeet Sweeeet Sweeeet, im subbed to the thread and make sure to keep my eyes open
Cannot wait for your TW version kernel and the other SS ^_^
New version UP
Hi guys:
New version, added few new things (but still learning, right? )
Have build the TW version but bootloop, I hope I can solve it soon.
Meanwhile if you have the time and wish to make a test, it can help me to keep improving things.
Best!
zparallax said:
Hi guys:
New version, added few new things (but still learning, right? )
Have build the TW version but bootloop, I hope I can solve it soon.
Meanwhile if you have the time and wish to make a test, it can help me to keep improving things.
Best!
Click to expand...
Click to collapse
I can test kernels for you on TW
Master it's alive!!... It's alive!!...
Sock12345 said:
I can test kernels for you on TW
Click to expand...
Click to collapse
Hello everyone:
New version for TW is alive!!, tested on XtreStoLite. Sock12345, ready, set... Go!!!
Thank you all for your interest and support
Best!
zparallax said:
Hello everyone:
New version for TW is alive!!, tested on XtreStoLite. Sock12345, ready, set... Go!!!
Thank you all for your interest and support
Best!
Click to expand...
Click to collapse
Sweeeeeet downloading and installing right nowwwww ^_^
Wish it can be flash on TW KitKat g900f....ohh my
Maybe?...
hazri1974 said:
Wish it can be flash on TW KitKat g900f....ohh my
Click to expand...
Click to collapse
Hi hazri1974:
I will think about make a build for KK, but no promises so far. :highfive:
Best!
Thnx for this kernel its really smooth ^_^ no laggs at all
Greeeeaaaaaatttttt!!
Sock12345 said:
Thnx for this kernel its really smooth ^_^ no laggs at all
Click to expand...
Click to collapse
Hi Sock12345:
Thank you for your feedback, really appreciated!
That makes me feel that worth the effort! :highfive::good:
It could be interesting if you try for a while and give me some feedback about battery and stuff!
Best!

[KERNEL][UBERTC 4.9.3][Blu_active] Crystal Kernel [03/04/15]

Features:
Based on Chroma Kernel (special credit for TomorrowLand_Ace work)
Blu_active Default Governor
Blu_plug - CPU Hotplug (removed Franco hotplug)
FIOPS I/O Scheduler
Enabled Overclocking CPU & GPU
Undervolted GPU
Build on Ubuntu 14.10
Kernel is secure
Compiled with lastest UBERTC 4.9.3, -O3 flags (GPU included), Graphite, hardfloat, and many other otimizations
FauxSound
PowerSuspend Driver
MSM Sleeper
Battery Life eXtender
LCD KCAL (Last version from @savoca, can't be tuned from any kernel manager for now)
Init.d Support
USB OTG
LZ4 (for a faster boot)
S2W / DT2W
Wake Gestures (huge thanks to @flar2)
Stereo Call Recording
Removed a lot of debug
Some Features from 3.7+ linux kernel
Upstream with Linux kernel .00
Full F2FS support (need to mod ramdisk to make it work, will make it automatic later)
Lots of optimizations from CAF, CM, and other kernels around xda
Main idea: Greatly patched kernel with the best governor, I/O scheduler and hotplug built with UBER toolchain.
Download for Lollipop 5.1
MOD EDIT, Download removed, rule 12 @gregbradley
Credits:
@TomorrowLand_Ace
@eng.stk
@franciscofranco
@faux123
@flar2
@show-p1984
@neobuddy89
@savoca
@RIPng
Source
If you want to support student and his work:
​
XDA:DevDB Information
Crystal Kernel, Kernel for the Google Nexus 5
Contributors
mastero9017
Source Code: https://github.com/mastero9017/hammerhead
Kernel Special Features:
Version Information
Status: Stable
Created 2015-04-03
Last Updated 2015-04-03
Reserved.
Where is the download link.? Can't open
Zonkoprince said:
Where is the download link.? Can't open
Click to expand...
Click to collapse
Fixed, link is under clickable Mediafire.
What app i should use to customise?
Zonkoprince said:
What app i should use to customise?
Click to expand...
Click to collapse
I suggest Kernel Auditor.
Kinda wondering could you maybe add some features from this kernel thread?
http://forum.xda-developers.com/showthread.php?t=2845768
It has nexus 5 kernel too but the devs mainly focused on n4 so maybe you could make the n5 version of it especially the 5.1 version. If it is allowed by the devs. Since the last commit is 2 months old and no new updates for 2 months
JJsevol said:
Ah makes sense now.
@mastero9017 are there any other changes you made from chroma besides the blu changes and toolchain? Liking the kernal so far :good:
Click to expand...
Click to collapse
Everything is listed in OP. I'm not sure yet about future of this kernel. TomorrowLand_Ace will provide great patches for kernel itself and i will try to port changes to blu modules from shamu and tweaks some values, flags, etc
Thread temporarily closed whilst I look in to the multiple reports made
@eng.stk has explicitly said that you have not got permission to share his work.
Download removed, thread remains closed

[KERNEL]OwnKernel-Bacon[V1.4][3.4.109][Ofast][Uber-5.2-cortex-a15]

OwnKernel for OnePlus One
Download Here!(Check Bacon Section)
Features:-
-Kexec Hardboot Patch
-Ofast optimizations
-A few additional governors like zzmoove pegasusq nightmare impulse smartmax etc
-Io Schedulers like BFQ, SIO, zen,etc
-Many TCP Congestion controls enabled, default westwood
-Linux Kernel 3.4.109
-s2s, and touch boost mods
-Lots of patches compared to stock kernel
-All credits to original authors
Credits> @Lord Boeffla @KingBabasula @fransciscofranco @ak for commits from their kernels included in this
@##W4TCH0UT## for helping me to solve errors
KERNEL SOURCE CODE
ASK HERE FOR SUPPORT, ETC.​'
Based on stock cm kernel source
XDA:DevDB Information
OwnKernel for OnePlus One, Kernel for the OnePlus One
Contributors
akhilnarang
Source Code: https://github.com/OwnROM-Devices/OwnKernel-bacon
Kernel Special Features: -Ofast Optmizations. Upstreamed to latest mainline linux kernel 3.4.108
Version Information
Status: Testing
Created 2015-06-23
Last Updated 2015-10-03
Reserved
CHANGELOG FOR OWNKERNEL 1.1
"Merged latest updates from CyanogenMod",
"Added BFQ I/O scheduler(default), SIO, and Zen",
"Added SmartMax, Impulse Governors",
"Kcal control",
"ZRAM",
"Entropy Tweaks",
"Adreno Idler",
"Cortex-A15 Optimizations",
"GPU optimizations"
Is this compatible with all roms?
great man
lefttobleed said:
Is this compatible with all roms?
Click to expand...
Click to collapse
I've tried only on OwnROM, and Resurrection Remix
But its based on the stock cm kernel source, so it should work fine on most ROMs
Working good on cos12
wow great sir
Sent from my A0001 using Tapatalk 2
@akhilnarang
Can't wait to see what comes of this. Its nice to see new projects popping up, especially kernels. Holler at me if you need anything.
cm11 please. for mahdi rom
Working very nicely on the latest exodus rom using kernel audiotor to tweak. Uber 6 is very smooth! Will be keeping an eye on this for sure.
Maybe write uber 6 in the title so that it gathers more attention. Just a thought...
Added to OnePlus One index thread:
[INDEX] OnePlus One Resources Compilation Roll-Up
Im on cm12s and battery seems good by now... (1o hs use since flashed)
OwnKernel Bacon has now been updated to 1.1
Sorry for the long delay, was busy
Changelog
"Merged latest updates from CyanogenMod",
"Added BFQ I/O scheduler(default), SIO, and Zen",
"Added SmartMax, Impulse Governors",
"Kcal control",
"ZRAM",
"Entropy Tweaks",
"Adreno Idler",
"Cortex-A15 Optimizations",
"GPU optimizations"
Grab it from within Kernel Adiutor Downloads Page
Or from the download link in OP
Hit thanks if you like it
Enjoy!!!
Very nice Kernel, thanks for your work! Will report back about battery life!
Hi, nice job and very good kernel.
I noticed that during the charge the phone is very hot, any suggestion on how reduce ampere during charging?
Thanks
Hmm guys sorry for the monthlies
OwnKernel-Bacon-1.2 is out
Check Kernel Adiutor for most of the required stuff
Download Here!
Changelog
Small Changelog:-
"Merged latest updates from CyanogenMod",
"Added TripNDroid I/O scheduler",
"Added Intelliactive, intellidemand,and Governors",
"Dynamic FSync",
"Lots of optimizations flags added",
"GPU OC till 657Mhz",
"Update zzmoove, and BFQ",
"Compiled with ArchiToolchain 5.1 optimized for Cortex-A15",
"Some things I don't remember, check here http://hastebin.com/nugukesimi.vhdl"
f2fs support is present to this kernel?
Hi guys
I'm new here, literally. I came from Nexus 5. Just got my one plus a couple days ago and this is my first custom kernel so I don't much about it but I was wondering does the opo kernels support fast charge like Nexus does?
Thanks in advanced
OwnKernel-Bacon-1.3
http://sourceforge.net/projects/own...el/OwnKernel-Bacon-V1.3-20150917.zip/download
md5sum 41c5233396f29013bcb8e0409f09be30
Changelog
makefile: added new -g0, -fivopts, -fno-inline-function optimizations
KCAL updates
Update interactive governor
Merge CM
Update zzmoove, and BFQ
Compiled with UberTC 5.2 optimized for Cortex-A15
Some things I don't remember, check here http://hastebin.com/azahacisim.vhdl
Although that link says Bricked Hotplug, it'll be there later, disabled for now :v
Solid stable kernel. Thanks for the work!

[KERNEL][CM/AOSP] Heliox Kernel [1/12]

Introduction
A new stable custom kernel for our onyx
Features
Compatible with all CM and AOSP ROMs (except OOS)
Compatible with 6.0 and 7.x
Built with GCC 4.9 toolchain .
Adreno idler.
USB Fast Charge
Built-in AdBlocker
Optimized RWSEM Algorithm.
Latest security patches.
Sweep2Wake
Added governors : bioshock, darkness, elementalX, pegasusq, smartmax_eps, wheatley, yankactive, zzmove, impulse
Added I/O schedulers : zen and tripndroid
CPU Input Boost
Wakelock toggles
Optimised memory management
Enable Arch Power
Optimised core control
O2 optimisations
Instructions
Copy the kernel zip to your phone
Reboot to recovery. I would suggest TWRP by Nachiket
Flash the zip
Reboot
Download​https://androidfilehost.com/?fid=385035244224402842​
NOTE
Use the Kernel Adiutor to access all the features
Kernel is compatible with the new MM bootloader only
Recommended Settings
Governor: ElementalX
Multicore Power Saving: Aggresive
CPU Max freq: 1728MHz
Core control: Enabled
I/O scheduler : ZEN with 512kb read ahead for int. and ZEN with 384 kb for external
Sync Threshold : 960mhz
Input Boost Freq : 652mhz
Credits
 @CheckYourScreen
 @eng.stk
 @Lord Boeffla
 @franciscofranco
 @rjdTWO
 @ZaneZam
Special shout out to Nachiket.Namjoshi for always helping
XDA:DevDB Information
Heliox Kernel, Kernel for the OnePlus X
Contributors
Subhrajyoti Sen
Source Code: https://github.com/SubhrajyotiSen/HelioxKernelOnyx
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2016-11-21
Created 2016-11-21
Last Updated 2016-12-01
Changelog
01/12/2016
Add KCAL support
Add Voltage Control
23/11/2016
Add support for Sultan-ized ROMs
Patch multiple QuadRooter vulnerabilities
21//11/2016
Initial Release
Such Thug Much Wow! Great work buddy!
Great to see another kernel
Nice work buddy!
Great work
Finally, up on XDA
Working with Dirty Unicorns 11/20 build?
Ragonexus said:
Working with Dirty Unicorns 11/20 build?
Click to expand...
Click to collapse
Yes! You can check the screenshots tab to verify
Great job my friend. You've come a far way from where you were.
does it need any modifications in kernel adiutor or just leave it as original settings.
Fantastic job my friend working great!!
namquang93 said:
does it need any modifications in kernel adiutor or just leave it as original settings.
Click to expand...
Click to collapse
Stock settings work just fine.
But recommended settings would be
Governor: ElementalX
Multicore Power Saving: Aggresive
CPU Max freq: 1728MHz
Core control: Enabled
I/O scheduler : ZEN with 512kb read ahead for int. and ZEN with 384 kb for external
Sync Threshold : 960mhz
Input Boost Freq : 652mhz
Is this kernel compatible with Sultans CM13? I tried to flash it, but it was stuck on CM boot animation for 30+ minutes and I gave up, because my battery would die.
Kolio_xda said:
Is this kernel compatible with Sultans CM13? I tried to flash it, but it was stuck on CM boot animation for 30+ minutes and I gave up, because my battery would die.
Click to expand...
Click to collapse
Sultan-ized ROMs aren't currently supported. It will be added in the next release
Subhrajyoti Sen said:
Sultan-ized ROMs aren't currently supported. It will be added in the next release
Click to expand...
Click to collapse
One suggestion is to update op to indicate so. Or else u will see my similar post
Tiongkia said:
One suggestion is to update op to indicate so. Or else u will see my similar post
Click to expand...
Click to collapse
Thanks for pointing that out Done
Release 2 is up
Changelog
Add support for Sultan-ized ROMs (Check screenshots for confirmation)
Patch multiple QuadRooter vulnerabilities
https://www.androidfilehost.com/?fid=457095661767117919
Latest release still cant boot on Sultan. Stuck in CM boot animation for 20 mins. Dunno if it's just me.
Kolio_xda said:
Latest release still cant boot on Sultan. Stuck in CM boot animation for 20 mins. Dunno if it's just me.
Click to expand...
Click to collapse
I personally tested it on sultan's cm13.
Try one thing. Flash the ROM again and then the kernel.

Categories

Resources