[kernel][LP AOSP&TW] Amplitude Kernel 0.4.2 + Config Tool (F, P, M, W8, I) - Galaxy S 5 Original Android Development

Amplitude Kernel for Galaxy S5
I am not responsible for any damage to your phone.
Read before downloading or posting in the thread:
Proceed with caution if you have no experience. This kernel has been tested in G900F, G900M, G900P, G900W8, G900T, G900I and G900H (Thanks to @MOKIAAA for testing), but must work on almost every variant.
As the title says is for Lollipop & KK and is based on the CM12 & 12.1, the touchwiz version is based on the samsung sources
I will be thankful if some kernel master teach me more, that way I can advance faster and add better functionality. :fingers-crossed:
To download the kernel visit the DOWNLOADS section HERE
DOWNLOAD THE LATEST VERSION HERE (Thanks to androidfilehost.com)
Amplitude 4.2 TW
Amplitude 4.2 AOSP
Amplitude 4.2 AOSP 5.1
[INSTALL STEP-BY-STEP]
Copy the ZIP in your SDCARD
Reboot into TWRP recovery
Flash the kernel
Wipe Dalvik & Cache
Enjoy!​
Contributors
zparallax, faux123 * The kernel master *
Team CyanogenMod for his wonderful source
And any other developer that have contributed to the CM project or to the development of governors, scheduler or any other developer not mentioned (if you want me to include your credits I will)
[THANKS] to all devs on XDA and the great XDA team
Source Code:
- AOSP
- TW
Kernel Features:
- Added my own Governor (WAVE), based on Conservative with some tweaks for speed and battery
- Based on Linux kernel version 3.4.106+
- Built with Linaro Toolchain 4.9.3
- Alucard Hotplug (by alucard), Mako Hotplug (by franciscofranco), Intelliplug (by faux123), bricked hotplug (by showp1984)
- MP Decision back
- Power Suspend (by faux)
- Intelli thermal (by faux123)
- GOVs: Intelliactive, Intellimm, Optimax, OnDemand, Interactive, Userspace, Powersave, Performance, Conservative, Smartass2, nightmare, smartmax (requested by abelavila), Hyper
- IO SCHEDs: NOOP, Deadline, ROW, CFQ, etc.
- TCP Congestion: Westwood, Reno, Bic, Cubic, Highspeed, etc.
- Voltage control
- Gamma Control (by savoca)
- Rebased to 3.4.106
- Added several tweaks and several optimizations
Version Information
Status: RC
Current Version: Amplitude 0.4.1
Release Date: 2015-04-10
Created 2015-01-31
Last Updated 2015-04-10
XDA:DevDB Information
[kernel][LP AOSP(5.0&5.1) &TW] Amplitude Kernel, Kernel for the Samsung Galaxy S 5
Contributors
zparallax
Source Code: https://github.com/zparallax/
Kernel Special Features: Serveral governors to choose, several IO Scheds, Serveral tweaks
Version Information
Status: Stable
Current Stable Version: 0.4.1
Stable Release Date: 2015-04-10
Current RC Version: 0.4.2
Beta Release Date: 2015-04-26
XDA:DevDB Information
[kernel][LP AOSP&TW] Amplitude Kernel, Kernel for the Samsung Galaxy S 5
Contributors
zparallax
Source Code: https://github.com/zparallax/
Kernel Special Features: Serveral governors to choose, several IO Scheds, Serveral tweaks
Version Information
Status: Stable
Current Stable Version: 0.4.2
Stable Release Date: 2015-04-26
Current Beta Version: 0.4.2
Beta Release Date: 2015-04-26
Created 2015-02-06
Last Updated 2015-04-26

Reserved
Tested (and working) ROMs with this kernel
- BlissPop
- Euphoria OS
- Fusion
- CM12
- Temasek
- AICP
- Resurrection Remix
- CrDroid
- SOKP
And almost any CM12 or AOSP rom out there must work with this kernel
- XtreStoLite :highfive:
- Alliance Thanks @cranio84
- Wanam Lite Thanks @cranio84
- AMBASADII ROM Thanks @cranio84
- ALEXNDR
- JoelDroid Thanks to my bro @Sock12345
- Zombie ROM Thanks to my bro @Sock12345
Other TW Roms must work too

Reserved
For changelog
v0.4.2
- Added a new compression
- Added several cpuidle fixes
- Added sound control
- Changed to compile with (SaberNaro Thanks to frap129)
- Some other tweaks
v0.4.1
- Added bricked hotplug
- Added ramdisk update to BOC7
- Added several other fixes
v0.4.0
- Added Intelliplug 4
- Added PowerSuspend 1.6
- Added Screen Functions (S2W, S2S, DT2W) (thanks ktoonsez)
- Added a bunch of fixes
- Added a bunch of optimizations on the makefile
v0.3.3
- Android 5.1
- Backport for PKSM
- Several tweaks!
v0.3.2
- Added my governor WAVE
- Added some tweaks
v0.3.1
- Rebased to linux 3.4.106
- Added multiple optimizations
- Better battery life (Hopefully)
- UKM 3.8.1
v0.3.0
- Removed Intelliplug, for some reason is causing a slowdown in the whole kernel (checking this)
- Removed Faux Sound (You can use your own Sound Hack)
- Added Hyper
- Tweaked Mako and Alucard (Speed again)
- Resolved the TW slowdown (Checked with XtreSto, great battery life BTW)
- Some other tweaks (UKSM, thanks to Guneet... Some others)
v0.2.5
- Added new UKM version
- Show available freqs
- F2FS... Once again
- Some other tweaks... Maybe more faster
v0.2.4
- Permissive... Finally
- Added Intelliplug
- Added PowerSuspend (HI battery... Welcome!)
- Fixed Synapse Min Freq. (Hopefully)
- Disabled MP Decision
- Some other tweaks!
v0.2.3
- Permissive (it's working?)
- Added Gamma Control
- Added Fast Charge
- Some other tweaks
v0.2.2
- Reworked from scratch
- Intelliplug and MP Decision
- Removed GOVs, let's see if it's more stable
- Removed Intellithermal, rework too
- Added several tweaks
- F2FS support
- Fastcharge is suposed to work
- Some other tweaks
v0.2.1
- Removed the MP Decision, let's try only with Intelliplug to make it more stable
- Added several tweaks, maybe it will be more faster and battery friendly, overall perfomance improved (?), need feeback, maybe placebo effect
- F2FS support
- Done several stability tests, just to make sure no RR... Have one but never found the issue
- Added some more flags in defconfig to allow kernel panic log and better debug
- Some other tweaks
v0.2.0
- Corrected intelliplug by Faux
- Corrected voltaje for TW (Now you can tweak freely)
- Added MSM MP_Decision (BY showp1984)
- Some other tweaks
v0.1.5:
- Corrected the UI stopped working error
- Removed Intelliplug (Somehow it's breaking things)
- Added Mako Hotplug (By franciscofranco)
- Added fastcharge
- Added CPU boost
- Some other tweaks
v0.1.4:
- Added governors Intellidemand (as requested by abelavila), ZZMove (as requested by Gentilsatan), optimax, smartassv2
- Removed some governors (they need a little more of work to be ported)
- Removed fastcharge, need to rework the code
- Optimized and more battery friendly
v 0.1.3:
- Added fastcharge
- Added voltage control
- Fixed FauxSound in TW version (thank you @non4 for notice that)
v. 0.1.2:
- Added several governors: lulzactiveq, lulzactive, preservative, adaptive, nightmare
- Added stratosk Dynamic Hotplug
v. 0.1.1:
- Added several IO Scheds: FIFO, FIOPS, VR, ZEN, SIO
- Added three new GOVs: Lagfree, Smartass2, Lulzactive
- Commited several other tweaks (build rules, libraries, etc)

You also gonna build 1 for TW??

I will think about it
Sock12345 said:
You also gonna build 1 for TW??
Click to expand...
Click to collapse
Hi Sock12345:
I will think about it, since I have the source code from Samsung for LP I can add the same functionality that this have.
Thank you for your interest!

zparallax said:
Hi Sock12345:
I will think about it, since I have the source code from Samsung for LP I can add the same functionality that this have.
Thank you for your interest!
Click to expand...
Click to collapse
Sweeeet, hope you will build it for TW also ^_^

Sock12345 said:
Sweeeet, hope you will build it for TW also ^_^
Click to expand...
Click to collapse
+1
Sent from my SM-G900F using XDA Free mobile app

Piretia said:
+1
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
+2
Sent from my SM-G900T using Tapatalk 2

Hi everyone:
Some benchmarks... And now trying to build for TW.
Best!!

zparallax said:
Hi everyone:
Some benchmarks... And now trying to build for TW.
Best!!
Click to expand...
Click to collapse
That sure is a nice score ^_^
How is battery life so far?
When you have the TW one your gonna release it for everyone to test? or just some people to test?

Sock12345 said:
That sure is a nice score ^_^
How is battery life so far?
When you have the TW one your gonna release it for everyone to test? or just some people to test?
Click to expand...
Click to collapse
Hi Sock12345:
I just forgot to take an screenshot but it has working fine so far since yesterday (I will put some screens tomorrow once the kernel is stable), right now testing some other things like new governorns and stuff.
I will release the TW kernel in this thread as soon as it's ready, anyone is invited to test. :victory:
Best!

zparallax said:
Hi Sock12345:
I just forgot to take an screenshot but it has working fine so far since yesterday (I will put some screens tomorrow once the kernel is stable), right now testing some other things like new governorns and stuff.
I will release the TW kernel in this thread as soon as it's ready, anyone is invited to test. :victory:
Best!
Click to expand...
Click to collapse
Sweeeet Sweeeet Sweeeet, im subbed to the thread and make sure to keep my eyes open
Cannot wait for your TW version kernel and the other SS ^_^

New version UP
Hi guys:
New version, added few new things (but still learning, right? )
Have build the TW version but bootloop, I hope I can solve it soon.
Meanwhile if you have the time and wish to make a test, it can help me to keep improving things.
Best!

zparallax said:
Hi guys:
New version, added few new things (but still learning, right? )
Have build the TW version but bootloop, I hope I can solve it soon.
Meanwhile if you have the time and wish to make a test, it can help me to keep improving things.
Best!
Click to expand...
Click to collapse
I can test kernels for you on TW

Master it's alive!!... It's alive!!...
Sock12345 said:
I can test kernels for you on TW
Click to expand...
Click to collapse
Hello everyone:
New version for TW is alive!!, tested on XtreStoLite. Sock12345, ready, set... Go!!!
Thank you all for your interest and support
Best!

zparallax said:
Hello everyone:
New version for TW is alive!!, tested on XtreStoLite. Sock12345, ready, set... Go!!!
Thank you all for your interest and support
Best!
Click to expand...
Click to collapse
Sweeeeeet downloading and installing right nowwwww ^_^

Wish it can be flash on TW KitKat g900f....ohh my

Maybe?...
hazri1974 said:
Wish it can be flash on TW KitKat g900f....ohh my
Click to expand...
Click to collapse
Hi hazri1974:
I will think about make a build for KK, but no promises so far. :highfive:
Best!

Thnx for this kernel its really smooth ^_^ no laggs at all

Greeeeaaaaaatttttt!!
Sock12345 said:
Thnx for this kernel its really smooth ^_^ no laggs at all
Click to expand...
Click to collapse
Hi Sock12345:
Thank you for your feedback, really appreciated!
That makes me feel that worth the effort! :highfive::good:
It could be interesting if you try for a while and give me some feedback about battery and stuff!
Best!

Related

[Kernel][TW][SM-G901F] GUYVER Kernel v0.9[04/01/16]

GUYVER KERNEL​
This kernel is ONLY for SM-G901F TouchWiz Lollipop​You will void your warranty after flashing this ROM (knox @ 0x1)​I'am not responsible of any damage caused to your device after flashing this KERNEL​
Features:
Code:
- Based on the last Samsung source (OE2)
- Compiled with the last @Christopher83 LINARO 4.9.4 2015.06 optimized for Cortex A15 - build 14/07/2015
- Init.d support
- CRC Disabled
- Android logger disabled
- Kernel logger disabled
- Busybox
- SELinux set to "Permissive"
- Disabled restrict rooting
- Added Simple GPU Algorithm
- CPU undervolt support
- Fast charge
- Dynamic Fsync Control
- IntelliPlug
- Intelli_Thermal
- KCAL
- PowerSuspend
- Google Services wakelock fix
DOWNLOAD:
VERSION 0.9
VERSION 0.8(revision 2)
Credits:
- Alcolawl
- Alucard_24
- AndroidGX
- arter97
- bbedward
- faux123
- flar2
- franciscofranco
- javilonas
- mrg666
- neobuddy89
- savoca
- showp1984
- Tkkg1994
- TripNRaVeR
- twistedumbrella
- ZaneZam
XDAevDB Information
GUYVER Kernel, Kernel for the Samsung Galaxy S 5 Plus ( SM-G901F )
Contributors
MEGAX91
Source
Version Information
Status: Stable
Current Stable Version: 0.8
Stable Release Date: 2015-11-25
How to Flash:
1. Restart to recovery
2. Flash attached .zip file.
3. Restart to system
Changelog :
v0.9 :
- Base on OK2 Source
- added governors ( pegasus - impulse - intellimm - smartmax - racoon_city )
- Scheduler patches
- added o.c
v0.8:
- removed intelli_plug
- added intelli_hotplug v5.1
- added bricked_hotplug ( The 'MSM Mp-Decision' in kernel adiutor is the bricked hotplug )
- added msm_hotplug
- added vibration control
- added governors ( bioshock - alucard , ... )
v0.7:
- -o3 OPTIMIZATION
- removed o.c
- added Sioplus & tripndroid i/o schedulers
- reduced wlan wakelocks
- added Sound Control: 3.6
*This is not working properly in Kernel Adiutor for now use FauxSound Audio/Sound Control*
v0.6:
- Compiled with the SaberMod 6.0.x Toolchain tuned for Cortex-A15 devices with NEON-vfpv4
- updated intelliplug to v4
- updated Intellithermal to v3
v0.5:
- Patched to Linux 3.10.93
- GOVERNORS ( ondemand Plus - Interactive Pro - Conservativex - yankactive - barry_allen - Intelliactive , .... )
- removed Sound Control: 3.6
- removed lcd notifier
- added Alucard Hotplug
- added Stereo Call Recording Support
v0.4:
added lcd notifier
added msm_zen_decision
added hwgenerator randomness
added Adreno idler
added e/frandom for reseeding
added zzmoove
v0.3 :
- added CPU O.C To 2.7GHz
- aded LED fading control
- added frandom support
- added Sound Control: 3.6
I'll test it tomorrow!
Sent from my SM-T325
Test it since yesterday.
Very good at the wlan-wow wakelock. It reduced it to 15min of 8h deepsleep.
(45min at SimpleGX 1.2.3)
53000 at Antutu.
Very fine.
Thanks for creating a kernel for our (exotic) device.
i'm already working on version 0.3 , it include O.C ( both CPU & GPU ) / frandom support / New random generator ( more I/O perfomance ) / LED controll / ....
Stay Positive:
https://en.wikipedia.org/wiki/GNU_General_Public_License
https://github.com/MEGAX91/GUYVER-KERNEL/commits/master
DienoX said:
Stay Positive:
https://en.wikipedia.org/wiki/GNU_General_Public_License
https://github.com/MEGAX91/GUYVER-KERNEL/commits/master
Click to expand...
Click to collapse
thanks for the tip.
God job guy!!
0,2%/h
I love u
And I am not in your credits? As I helped you so much? Not really nice of you
somehow cant download it from the link...404 not found...hmmm?
Tkkg1994 said:
And I am not in your credits? As I helped you so much? Not really nice of you
Click to expand...
Click to collapse
man i think i got amnesia!
i hope you forgive me.
i'm disappointed with FauxSound output quality! viper4android is way better.
for some reason i cant O.C CPU more than 2.7GHz!!!
MEGAX91 said:
man i think i got amnesia!
i hope you forgive me.
Click to expand...
Click to collapse
Of course I can
MEGAX91 said:
i'm disappointed with FauxSound output quality! viper4android is way better.
for some reason i cant O.C CPU more than 2.7GHz!!!
Click to expand...
Click to collapse
For your sound problem, there is boeffla sound control. And Lord Boeffla has the galaxy s5 so I think it is way more optimised for our device than faux
Edit: Here you can find it. But I have to say that this is for 3.4.y kernels and not for 3.10, but you will see
Tkkg1994 said:
Of course I can
For your sound problem, there is boeffla sound control. And Lord Boeffla has the galaxy s5 so I think it is way more optimised for our device than faux
Edit: Here you can find it. But I have to say that this is for 3.4.y kernels and not for 3.10, but you will see
Click to expand...
Click to collapse
thanks man.( you were totally right about github )
about 1 hr ago i tested the boeffla sound , it didnt work with 3.10.X ( i also tested the rem sound but i didn't noticed any improvement compared to stock )
i can easily O.C CPU to 2.7 but i cant O.C GPU !
https://github.com/MEGAX91/GUYVER-KERNEL/blob/master/arch/arm/boot/dts/qcom/apq8084-gpu.dtsi
MEGAX91 said:
thanks man.( you were totally right about github )
about 1 hr ago i tested the boeffla sound , it didnt work with 3.10.X ( i also tested the rem sound but i didn't noticed any improvement compared to stock )
i can easily O.C CPU to 2.7 but i cant O.C GPU !
https://github.com/MEGAX91/GUYVER-KERNEL/blob/master/arch/arm/boot/dts/qcom/apq8084-gpu.dtsi
Click to expand...
Click to collapse
Github is a must for kernels, GNU license...
If you want to OC the kernel even more, go and look here.
About GPU I haven't had a look until now, if I find something, I will tell you
If you got questions, you know where I am :good:
I tried to install it but i get bootloop. I have to say im on simplegx and i can't install lonas anymore as well. Only simplegx kernels work for me
I tried the lonas 1.0 - 1.3 many times. Always bootloop or freeze. SimpleGX worked everytime. Installed the GUYVER and it worked too.
@Cissiboy
Try to install lonas, then reinstall SimpleGX 1.2.3, then try Guyver's.
Good luck
Android2003 said:
I tried the lonas 1.0 - 1.3 many times. Always bootloop or freeze. SimpleGX worked everytime. Installed the GUYVER and it worked too.
@Cissiboy
Try to install lonas, then reinstall SimpleGX 1.2.3, then try Guyver's.
Good luck
Click to expand...
Click to collapse
thanks for the suggestion but Im not in a position in which i can try this at the moment
Luckily I have a pretty stable, longlasting and greatly performing rom nevertheless
Tkkg1994 said:
For your sound problem, there is boeffla sound control. And Lord Boeffla has the galaxy s5 so I think it is way more optimised for our device than faux
Click to expand...
Click to collapse
I tried already to port it into my kernel, but unfortunately, there is no app compatible to control it and even with some echo scripts in init.d it crashes if any other value different than default (off then).
So I concluded that boeffla sound for S5 is not compatible for S5 Plus :good:
Moreover boeffla sound for S5 is not interesting as much because you can only control speaker volume output, unlike on the S3 : a real hardware equalizer + mic control + some great features etc.

[Kernel][CM 13][SM-G901F] Lucifer Kernel [29/01/16]

Lucifer KERNEL​
This kernel is ONLY for SM-G901F CM 13​You will void your warranty after flashing this ROM (knox @ 0x1)​I'am not responsible of any damage caused to your device after flashing this KERNEL​
Features:
Code:
- Compiled with the UBER 6.0.x Toolchain
- 03 Opitimizations
- Upstream stable updates to 3.10.94
- LZ4 Compression
- CRC Disabled
- Kernel logger disabled
- Simple GPU Algorithm
- Adreno idler
- voltage control
- Fast charge
- Dynamic Fsync Control
- Intelli_Thermal
- KCAL
- PowerSuspend
- intelli_hotplug v5.1
- msm_hotplug
- AutoSMP
- Sioplus & tripndroid i/o schedulers
- Reduced WAKELOCKS
- NVIDIA enhance power efficiency patch
- GOVERNORS ( ondemand Plus - Interactive Pro - Conservativex - yankactive - barry_allen - Intelliactive - bioshock - alucard - zzmoove - Darkness - Umbrella_Core - Nightmare - Elementalx - Smartass V2 - LionHeart - Tripndroid )
DOWNLOAD:
Lucifer v1.0
Lucifer v2.0
Lucifer v3.0
Lucifer v4.0
Credits:
- Alcolawl
- Alucard_24
- arter97
- bbedward
- faux123
- flar2
- franciscofranco
- javilonas
- klozz
- mrg666
- neobuddy89
- savoca
- showp1984
- TripNRaVeR
- twistedumbrella
- ZaneZam
XDAevDB Information
Lucifer Kernel, Kernel for the Samsung Galaxy S 5 Plus ( SM-G901F )
Contributors
MEGAX91
Source
Version Information
Status: Stable
Current Stable Version:
Stable Release Date:
How to Flash:
1. Restart to recovery
2. Flash .zip file.
3. Restart to system
Changelog :
v4.0 :
- added frandom support
- Massive sound driver updates
v3.0 :
- Linux 3.10.95 update
- added cafactive governor ( version of interactive by CodeAurora )
- added zram support
- reduced wakelocks
- Updates and fixes for GPU
v2.0 :
- Fixed Vibration Issue
- added S2S/S2W
- added bricked_hotplug
- added nvidia power efficiency patches
- removed raccoon_city governor
- LED fading/blinking support
* use this script to control it *
- Implement kexec-hardboot
v1.0 :
- added o.c
- removed rem Sound/added sound control
- Fixed interactive governor
Beta 02 :
- added governors ( pegasus - impulse - intellimm - smartmax - racoon_city )
- removed autosmp/added mako_hotplug
- Scheduler patches
Thanks MEGAX91!
Will test it out as soon vibration works. I only use vibration on notification and calls.
testing (i hope to see an improvement in deep sleep!)
Will flash it as soon as vibration works. Thanks dude!
Envoyé de mon SM-G901F avec XDA Forums

			
				
The kernel's governors feels a bit slowed down from its stock counterparts
overlordofdoom1 said:
The kernel's governors feels a bit slowed down from its stock counterparts
Click to expand...
Click to collapse
what's your settings ?
* i suggest you using elementalx with intelli_hotplug *
MEGAX91 said:
what's your settings ?
* i suggest you using elementalx with intelli_hotplug *
Click to expand...
Click to collapse
yeah i tried it but it felt smoother with stock kernel and conservative governor, weird
overlordofdoom1 said:
yeah i tried it but it felt smoother with stock kernel and conservative governor, weird
Click to expand...
Click to collapse
Test the new version.
MEGAX91 said:
Test the new version.
Click to expand...
Click to collapse
Hi does vibration works in new version?
Envoyé de mon SM-G901F avec XDA Forums
audren49 said:
Hi does vibration works in new version?
Envoyé de mon SM-G901F avec XDA Forums
Click to expand...
Click to collapse
No.
MEGAX91 said:
Test the new version.
Click to expand...
Click to collapse
Yeah thanks elementalx is very smooth now
I saw on your github that you are just commiting things without any source (where you got it from) or who the author was. Credits have to be given for each commit. For example;
Update zram to Neobuddy's branch. Check out his githubpage (with a link) you understand?
Sent with my Nova powered SM-G901F
@Tkkg1994
Hi
all credits belong to people in the first post.
i got Zram commit from here :
https://github.com/neobuddy89/shamu/commits/marshmallow/drivers/block/zram?page=3
i got nvidia power efficiency patches from here : ( but i modified them to work with arm )
https://github.com/XileForce/Vindicator-S6-Unified/commit/df230500da807ae78e0a2123ed517f6a05ed9513
MEGAX91 said:
@Tkkg1994
Hi
all credits belong to people in the first post.
i got Zram commit from here :
https://github.com/neobuddy89/shamu/commits/marshmallow/drivers/block/zram?page=3
i got nvidia power efficiency patches from here : ( but i modified them to work with arm )
https://github.com/XileForce/Vindicator-S6-Unified/commit/df230500da807ae78e0a2123ed517f6a05ed9513
Click to expand...
Click to collapse
Well you don't have to publish that here. Instead you have to tell that on each commit. Do you know what I mean?
Sent with my Nova powered SM-G901F
@Tkkg1994
Ok , i got it.
先生ありがとうございました
----------------------------------------------------------------
i added some gestures like s2w/s2s/dt2w but i dont see gestures in kernel auditor! i think i need to compile my own K.A version
do you know any alternative app with gesture support ?

			
				
MEGAX91 said:
@Tkkg1994
Ok , i got it.
先生ありがとうございました
----------------------------------------------------------------
i added some gestures like s2w/s2s/dt2w but i dont see gestures in kernel auditor! i think i need to compile my own K.A version
do you know any alternative app with gesture support ?
Click to expand...
Click to collapse
You have to write your own app (stweaks or synapse). There you can add your own control things
Sent with my Nova powered SM-G901F
MEGAX91 said:
Click to expand...
Click to collapse
BTW there is a new update for cm13: build 2015/01/5 and thanks for the new kernel build, looks amazing

[Kernel][lux] Ultra Kernel for Moto X Play for 6.0.X[R5]

This is Ultra Kernel for Moto X Play, it is based in the sources of @squid2 with all his changes and the Ultra changes, behind of some cherry-picks of great devs.
Note:
This Kernel is only for Moto X Play (lux), I am not responsible of bricked devices. Flash at your own risk.
SquidKernel original features:
LED notification support
Moderately undervolted
Updated to Linux 3.10.94
Synced with latest CodeAurora changes
Improved memory management
Improved VMA caching backported from Linux 3.15
Optimized ARM crypto routines
Updated f2fs and WiFi drivers
FIOPS and BFQ I/O schedulers
Lionfish CPU governor
ClusterPlug big.LITTLE hotplug (designed for MSM8939)
KCAL MDP5 colour control (by savoca)
Improved zRAM backported from Linux 4.1
Compiled with Linaro GCC 5.1 and optimized for Cortex A53
Stripped down and optimized configuration
For see more of SquidKernel, check the post. Link
Ultra Kernel features
Builded with Archidroid 5.2 GCC (NEW)
WiFi drivers update
Pipe flag and Optimization Level -03
Optimize apply slack
Some optimizations for adreno files and tweaks ratio
Optimize SLUB
Reduce latencies in Kernel
IO Sched deadline tweaked
Added some governors
intelliactive
smartass2
bluactive
interactive_pro
smartmax
Release history:
Code:
r1: January 13 2016
-Initial build
r2b: February 01 2016
-Sync with lastest changes SquidKernel r14b
-mm:don't wait for high-order page allocation
-Updated wlan drivers
-PM / Wakeup: Use rcu callbacks for better performance
r3: February 09 2016
-Builded with Uber TC 5.2 GCC
-Added adreno idler for good work of msm adreno
-Wlan.ko is update and stripped
-Added LCD Notify and Powersuspend 1.7 (thanks to faux123)
-More support of Flags Level -03
-Up to date to SquidKernel r15
-Network speed tweak
r4: March 28, 2016
-Started with base fresh of SquidKernel r16
-Optimized some task for help to the performance
-Improves on SLUB
-Updated wlan.ko driver
-All changes of Squid Kernel r16
-Added 3 new governors:
-Barry Allen
-Alucard
-Bioshock
r5: March 28, 2016
-Overclock to GPU 700 MHz
-Added MSM Hotplug
-Added 2 I/O Shed:
-ZEN
-TRIPNDROID
-Reduce wakelocks
-Allow 320K encoding
-Disable crc software (MORE FAST)
-Enable ARCH POWER
Download:
r1
r2b
r3
r4
r5
Installation Instructions:
Flash the zip downloaded with TWRP and enjoy.
Thanks to:
@squid2 for his Kernel base and testing (special friend)
@GitHub
@xda developers
@AnoopKumar
XDA:DevDB Information
Ultra Kernel, Kernel for the Moto X Play
Contributors
TechnoAnder, squid2
Source Code: https://github.com/Ander-Alvarez/android_kernel_motorola_msm8916-1
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R5
Stable Release Date: 2016-03-28
Created 2016-01-13
Last Updated 2016-03-28
Firts build
This build have excellent changes for the battery life and performance good, because this Kernel have fine features, as more governors and the using of different Toolchain in this case (GCC 5.2), @squid2 tested the Kernel and it is working perfectly, I hope that my work like to you.
Cheers.
Flashing, Thanks a lot
---------- Post added at 10:26 PM ---------- Previous post was at 09:50 PM ----------
In about phone, kernel version shows "unavailable" it works perfectly for the rest
Sent from my XT1562 using Tapatalk
GtrCraft said:
Flashing, Thanks a lot
---------- Post added at 10:26 PM ---------- Previous post was at 09:50 PM ----------
In about phone, kernel version shows "unavailable" it works perfectly for the rest
Sent from my XT1562 using Tapatalk
Click to expand...
Click to collapse
Yes, I found that issue, but in the proxim release I will try fix it, thanks for you report. Cheers.
Would it be possible to add the smartmax_eps powersave governor from the nexus4 taurus kernel? So far everything is running fine here, thank you
Can I use this Kernel in based CM13 ROM's like (RR, Temasek, CrDroid) or CM13 only?
Benjamin_L said:
Would it be possible to add the smartmax_eps powersave governor from the nexus4 taurus kernel? So far everything is running fine here, thank you
Click to expand...
Click to collapse
I will try add it, cheers.
ToninhoTavares said:
Can I use this Kernel in based CM13 ROM's like (RR, Temasek, CrDroid) or CM13 only?
Click to expand...
Click to collapse
This Kernel work on any ROM MarshMallow 6.0.x
One more question @TechnoAnder, I'm very noob in this topic... I'm downloading the Temasek's CM13 ROM to test it, can I flash the Kernel right after flash the ROM + Gapps or just after the ROM is totally configured (boot + optimizing apps)?
Sorry my English and thanks for the help.
ToninhoTavares said:
One more question @TechnoAnder, I'm very noob in this topic... I'm downloading the Temasek's CM13 ROM to test it, can I flash the Kernel right after flash the ROM + Gapps or just after the ROM is totally configured (boot + optimizing apps)?
Sorry my English and thanks for the help.
Click to expand...
Click to collapse
Just you must install the ROM and GApps, reboot normally and when you set all reboot into TWRP and flash the Kernel.
TechnoAnder said:
This is Ultra Kernel for Moto X Play, it is based in the sources of @squid2 with all his changes and the Ultra changes, behind of some cherry-picks of great devs.
Note:
This Kernel is only for Moto X Play (lux), I am not responsible of bricked devices. Flash at your own risk.
SquidKernel original features:
LED notification support
Moderately undervolted
Updated to Linux 3.10.94
Synced with latest CodeAurora changes
Improved memory management
Improved VMA caching backported from Linux 3.15
Optimized ARM crypto routines
Updated f2fs and WiFi drivers
FIOPS and BFQ I/O schedulers
Lionfish CPU governor
ClusterPlug big.LITTLE hotplug (designed for MSM8939)
KCAL MDP5 colour control (by savoca)
Improved zRAM backported from Linux 4.1
Compiled with Linaro GCC 5.1 and optimized for Cortex A53
Stripped down and optimized configuration
For see more of SquidKernel, check the post. Link
Ultra Kernel features
Builded with Archidroid 5.2 GCC (NEW)
WiFi drivers update
Pipe flag and Optimization Level -03
Optimize apply slack
Some optimizations for adreno files and tweaks ratio
Optimize SLUB
Reduce latencies in Kernel
IO Sched deadline tweaked
Added some governors
intelliactive
smartass2
bluactive
interactive_pro
smartmax
Release history:
Code:
r1: January 13 2016
-Initial build
Download:
r1
Installation Instructions:
Flash the zip downloaded with TWRP and enjoy.
Thanks to:
@squid2 for his Kernel base and testing
@GitHub
@xda developers
@AnoopKumar
XDA:DevDB Information
Ultra Kernel, Kernel for the Moto X Play
Contributors
TechnoAnder, squid2
Source Code: https://github.com/Ander-Alvarez/android_kernel_motorola_msm8916-1
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: r1
Stable Release Date: 2016-01-13
Created 2016-01-13
Last Updated 2016-01-13
Click to expand...
Click to collapse
Thank for the kernel. Flashing and trying out new governors on CM13.
Can I use this kernel with stock based 6.0 Marshmallux rom?
@TechnoAnder, could you make the voltage settings configurable by apps, like kernel adiutor?
ViperX85 said:
Can I use this kernel with stock based 6.0 Marshmallux rom?
Click to expand...
Click to collapse
Not yet
Which partitions can be f2fs formatted?
ViperX85 said:
Can I use this kernel with stock based 6.0 Marshmallux rom?
Click to expand...
Click to collapse
Nope.
carl_oak said:
Nope.
Click to expand...
Click to collapse
But he said it will work on any Marshmallow rom
This post http://forum.xda-developers.com/showthread.php?p=64795178
Sent from my XT1562 using Tapatalk
K.khiladi said:
But he said it will work on any Marshmallow rom
This post http://forum.xda-developers.com/showthread.php?p=64795178
Sent from my XT1562 using Tapatalk
Click to expand...
Click to collapse
Use squids kernel from r13 on. This one doesnt have the necessary changes. Squid took the moto g kernel sources to make it compatible with stock. or wait until they are merged here
ViperX85 said:
Can I use this kernel with stock based 6.0 Marshmallux rom?
Click to expand...
Click to collapse
No, soon I'll update the Kernel with support for MARSHMALLOW.
Added to index
[INDEX] [MOTO X Play]

[KERNEL] [MM] [OMNI] [KCAL][OTG][MTP][F2FS] [31 AUG] stranostrano kernel ver. 2.2.4 - Discontinued

S=T=R=A=N=O=S=T=R=A=N=O
Kernel
31-august-2016 update to ver 2.2.4
An OMNI based kernel for OnePlus One (aka Bacon)
Based on OMNI source
Works on OMNI and OMNI based Marsh Mellow roms.
Reported it works on official OMNI nightly, Herna HomeBuild, SlimSaber, SAOSP and OmniSense
Probably works on all other Omni based rom MM builds. Try and report
An OMNI based kernel with working MTP, OTG, KCAL, Franco's SoundControl, Boeffla touchboost, Voltage Control and other feature​
Based on OMNI NIGHTLY kernel source with the addition of Savoca's Kcal, Franco's SoundControl, Boeffla's Touchboost, Voltage Control, Simple_gpu_algorithm and other features ported from their respective sources and reworked by me .
CPU Governors
Smartmax / Interactive / Conservative / Userspace / Powersave / Ondemand / Performance / Slim / Ondemandplus / Alucard / Zzmoove / Intellimm / HYPER
16 march - added Wheatley and Slim governors
19 march - added OndemandPlus governor
12 april - added Adaptive, Darkness and Nightmare governors
15 april - added Voltage Control
24 april - added Intelliactive, Intellidemand and Alucard governors
25 april - removed Conservative, Wheatley and Yankactive cpu governors
02 may - removed all unnecessary cpufreq governors - just added Alucard to defaults
07 may - added again Slim and OndemandPlus governors
11 may - Awake CPU schedule workqueue
24 june - added zzmoove governor - thanks to @ZaneZam
27 june - fix - enabled hotplug in zzmoove governor - thanks to @kodora that has reported malfunction
31 august - added HYPER and Intellimm cpu governors and applied update to source code
GPU Governors
Cpubw_hwmon / Msm_cpufreq / Msm-adreno-tz / Userspace / Powersave / Performance / Simple_ondemand
15 april - Added Simple_gpu_algorithm
17 april - removed cpubw_hwmon because it freeze OPO
02 may - Added Adreno Idler
11 may - GPU overclock to 657MHz and idle to 27MHz
I/O Scheduler
NOOP / DEADLINE / ROW / CFQ / BFQ / TEST-IOSCHED / SIO / TRIPNDROID 19 march - added SIOPLUS, FIOPS and ZEN
Hotplug
24 april - Added Alucard hotplug
02 may - Added MSM hotplug
27 june - Added "Bricked hotplug" - thanks to @show-p1984
Custom Features & Optimizations
28 July - switched to @francisco Franco thermal control
added Adaptive Low Memory Killer
Built with UBER 4.8
KCAL v2 Control - credits to @savoca
Vibrator Intensity interface
Franco's Sound Control - credits to @franciscofranco
Boeffla TouchBoost - credits to @Lord Boeffla
Voltage Control - credits to @faux123
Simple_gpu_algorithm - credits to @faux123
Alucard hotplug - credits to @alucard_24
MSM Hotplug - credits to @myfluxy
Adreno idler - credits to @arter97
Tuned and updated Powersuspend feature on 02 May release. - thanks to @faux123 and @Yank555
Fsync on/off toggle - credits to @franciscofranco
CRC Software - disabled by default and added toggle switch.
Schedule workqueues on awake CPU and added toggle switch.
FS - added F2FS support
DISCLAIMER: flash at your own risk; I've tested for hours and all gone right. My goal was to add KCAL and other missed features to the OMNI Rom Official kernel and share with you for improve our android experience.
Contributors
stranostrano
Source Code: github.com/stranostrano
Special thanks for their source goes to: OmniRom team, savoca, herna, fermasia, derromtester, osm0sis, Francisco Franco, Lord Boeffla, Faux123, Alucard_24, myfluxi, arter97, yank555, zanezam, show-p1984 and many others.
My very special thank goes to @DerRomtester that helped me at the beginning.
Created on 28/01/2016
Updated on 31/08/2016
Download
current version: Ver. 2.2.4 - 31 august release
OLD RELEASE:
Ver. 2.2.3 - 28 july release
Ver.2.2.2 - 18 july release
Ver.2.2.1 f2fs - 13 july release
Ver.2.2.1 - 27 june release
Ver.2.2 - 24 june release
Ver.2.1 - 11 may release
Ver.2.0 - 07 may release
Ver.1.8.0 - 02 May release - lags fixed
Ver.1.7.3 release - deprecated - there are lags
Ver.1.7.2 release - deprecated - there are lags
Ver.1.7.1 release
Ver.1.7 release
Ver.1.6 release
Ver.1.5 release
ver 1.4 release
ver 1.3 release
ver 1.2 release
ver 1.1 release
ver 1.0 release
extras:
Screen Control App by savoca
Flashing Instructions:
- Flash through recovery (PhilZ Touch 6.59.2 and TWRP recommended)
- Clean cache (recommended)
- Reboot
- Install Kernel Adiutor or Synapse (optional)
- Have fun ...always!
Changelogs:
Version 2.2.4 - 31 august release
- cpu governors - added HYPER (works really good) and IntelliMM governors
- updated source code to latest omnirom commits
Version 2.2.3 - 28 july release
- thermal: switched to Francisco Franco thermal control
- managed some code
Version 2.2.2 - 18 july release
- added Adaptive Low Memory Killer (toggle available)
- disable Config_pft for secure kernel
- other fix (see source code)
Version 2.2.1_f2fs - 13 July release
- added f2fs support
Version 2.2.1 - 27 June release
- fixed zzmoove cpufreq governor - thanks to @ZaneZam
- Added "Bricked hotplug" and fixed some error
Version 2.2 - 24 June release
[/B]- Added zzmoove cpufreq governor - thanks to @ZaneZam
- fixed some bugs and security issue. (see commits @source )
Version 2.1 - 11 May release
- GPU overclock to 657MHz and idle to 27MHz;
- Disabled software CRC at boot and introduced a toggle switch;- Introduced toggled schedule workqueues on awake CPUs to save power;
- USB: cdc-acm - more sanity checking;
- Various optimization to source code.
Version 2.0 - 07 May release
- cpufreq - added OndemandPlus and Slim governor;
- Fsync on/off toggle.
Version 1.8.0 - 02 May release
- Reworked from a clean code to fix lags;
- Removed a lot of unnecessary cpu governors - now just the Omni defaults plus Alucard;
- Updated Alucard hotplug;
- Added MSM Hotplug;
- Cleaned Simple Gpu Algorithm and added Adreno Idler;
- Updated Powersuspend feature;
- Enabled some TCP congestion algorithm;
- Tuned a lot of code (my fault);
Version 1.7.3
- added again Powersuspend feature.
- removed Conservative, Yankactive and Wheatley cpu governors
Version 1.7.2
- Moved get_cpu_idle_time() to cpufreq.c to align Omni source to current standard;
- Updated and adapted to "get_cpu_idle_time()" change, all cpu governors;- Added Alucard hotplug and Alucard, Intelliactive and Intellidemand Cpu Governors;
- Added Powersuspend feature;
- Updated some code in sourceVersion 1.7.1
- Removed "cpubw_hwmon" from GPU governors because it freeze OPO
Version 1.7
- Added GPU Simple_gpu_Algorithm and Voltage Control
Version 1.6
- Added Adaptive, Darkness and Nightmare cpufreq governors
Version 1.5
- Added OndemandPlus cpufreq
- Added SIOPLUS, FIOPS and ZEN I/O scheduler
Version 1.4
- Rebased on OMNI official Source
- Added SLIM and WHEATLEY cpufreq
- Reworked KCAL feature keeping KCAL within its own source file removing unnecessary mdss_mdp_kcal_ctrl.h
Version 1.3
- Added Boeffla's TOUCHBOOST
- Added SIO and TRIPNDROID I/O Scheduler
Version 1.2:
- Added Franco's SOUNDCONTROL
- Added YANKACTIVE governor
Version 1.1:
- Fixed some bugs
Version 1:
- Added @savoca KCal
Hi, it sounds good, but where is the download link?
@stranostrano
Why didn't you base on official nightlies source?
Sent from my A0001 using Tapatalk
photobix said:
Hi, it sounds good, but where is the download link?
Click to expand...
Click to collapse
in the second post I think you are too fast and didn't give my time to edit the post :laugh:
Renosh said:
@stranostrano
Why didn't you base on official nightlies source?
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
my choice
Works on SAOSP. Will test for a couple days and report back.
Sent from my A0001 using XDA Labs
stranostrano said:
in the second post I think you are too fast and didn't give my time to edit the post :laugh:
Click to expand...
Click to collapse
Yes, found the link
It's booting with the official nightly, will test the kernel, thank you!
I tried the kernel and loved it ,Can I use the kernel in my ROM , OmniSense ? Only if you don't mind , also , all credits for the kernel will obviously go to you .
Manav Bhagia said:
I tried the kernel and loved it ,Can I use the kernel in my ROM , OmniSense ? Only if you don't mind , also , all credits for the kernel will obviously go to you .
Click to expand...
Click to collapse
Sure that you can.
Just insert a link to this tread on your thread op and don't forget to thanks all other devs.
I'm recompiling kernel to set "Smartmax" governor as default instead of "Interactive". I've noticed some UI lags with "Interactive" that seem solved switching to others except "ondemand".
Please, if you have lags UI, try to switch to other governor and report back.
Just for info: Version 1.1 is online
It's so good to see new OMNI kernel !!! You are a hero.
Any info on hotplugs ? Zen? Bricked ? Cannot test ATM.
FunkyRasta said:
It's so good to see new OMNI kernel !!! You are a hero.
Any info on hotplugs ? Zen? Bricked ? Cannot test ATM.
Click to expand...
Click to collapse
Hi funkyrasta,
Avaulable cpu Governor are in the op description.
To guys that are running my kernel. Please report how it works.
Thank you
stranostrano said:
To guys that are running my kernel. Please report how it works.
Thank you
Click to expand...
Click to collapse
It's been running good seems just as stable as stock kernel. Battery life is about the same as well which has been excellent for me.
Sent from my A0001 using XDA Labs
tekanina said:
It's been running good seems just as stable as stock kernel. Battery life is about the same as well which has been excellent for me.
Sent from my A0001 using XDA Labs
Click to expand...
Click to collapse
Hi mate and thank you for sharing your opinion.
Anyway, did you using kcal feature?
If you do, have noticed anomalous battery drain using it?
please report.
stranostrano said:
Hi mate and thank you for sharing your opinion.
Anyway, did you using kcal feature?
If you do, have noticed anomalous battery drain using it?
please report.
Click to expand...
Click to collapse
No I haven't used kcal. I just installed Color Control, I will try it out and see how it goes. Will report back.
Sent from my A0001 using XDA Labs
Tekanina, the color control from savoca is the app to set up the kcal kernel based feature. If you're using color control, then you have Kcal working.
What I want to kniw is if you notice anomalous battery drain compared to stock kernel.

[KERNEL][ALL VARIANTS][AnyKernel][v3.0] G3X-Ultimate Kernel for CM and AOSP ROM's

Introduction:
Welcome! I've developed ArtxKernel, with the aim to make a great and clean kernels for CM and AOSP ROM's, but this one is for those that don't want to mess with a lot of features, like a Flash and Use Kernel! Battery life its very impressive and this Kernel is the most clean that I've made, so, enjoy it
Click to expand...
Click to collapse
Features:
- CPU Input Boost
- Gov's: Interactive, OnDemand, Conservative, Powersave, Perfomance, Userspace, pegasusq, zzmoove, Alucard and IntelliMM
- Multicore power saving
- Alucard and Bricked hotplugs
- 27Mhz GPU
- Adreno Idler
- FastCharge Support (Updated, faster than ArtxKernel)
- PowerSuspend Mode
- Kcal color control
- Faux sound control
- Fifo, fiops, sio and zen schedulers
- Frandom support
- Async I/O, 37% more perfomance
- Fsync control
- init.d support
- Selinux permissive
- Fixed simple_ondemand GPU Gov
- 2-Way Stereo Call recording Patch
- PVS Level via sysfs
- Boosted min and max screen Brightness (It's safe)
- RAM, GPU and Battery optimizations
- Some Artx Optimizations
SmoothUnlocker:
If you want an extra boost flash it, check MEGA link, but take in consideration that it will make your Battery drain faster in exchange of perfomance and pure Smoothness
Downloads:
----------
MEGA
----------
Spectrum:
Wanna use it with Spectrum App? Then follow this simple steps:
• Download Spectrum Injector HERE (3rd post) Thanks to @frap129
• Flash the Kernel and then Spectrum Injector
• Put my Profile files in spectrum/profiles folder in your internal memory after boot
------
Profiles
------
• You're done, remember that you can change those configs with a text editor
Bugs:
If you see a bug, let me know and I'll be glad to help you and fix it
Social:
Wanna join a Telegram group of this Kernel? If you have any question or you need help, get in!
(let me know if the link is broken )
----------
Telegram Group
----------
Compatible with:
(Thanks to @marcdw and @jlb1959.01)
- Nougat ROM's
- Marshmallow ROM's
- Lollipop ROM's (Not confimed yet)
Thanks to:
cesarandres_8911, savoca, faux123, LineageOS Team, osm0sis, Feinzer
LG, matthewdalex, Andrei F, yarpiin and me
If anyone is missing here PM me
If you like the kernel and want to do a small donation it for sure gonna help me a lot and keep me motivated! :laugh:
Thank you and enjoy it!
​
XDA:DevDB Information
G3X-Ultimate, Kernel for the LG G3
Contributors
Stayn
Source Code: https://github.com/Artx-II/G3X_Kernel_lge_g3
Kernel Special Features: See above
Version Information
Status: Stable
Current Stable Version: 3.0
Stable Release Date: 2017-07-05
Created 2017-06-28
Last Updated 2017-08-19
Changelog!
Code:
[B]* v3.0[/B]
- Source updated
- Boosted min and max screen brightness (It's safe)
- Added 2-Way Stereo Call Recording Patch
- Added Governors: Alucard & IntelliMM
- PVS Level via SysFs
- RAM, GPU and Battery optimizations
- Some optimizations from Artx Kernel
- Cleaned a lot of code
[B]* v2.0[/B]
- Source updated
- Added Dualsim support
- Added Pegasusq Gov
- Added zzmoove Gov
- Added Alucard and Bricked hotplug
- 27Mhz GPU
- Adreno Idler
- Sound control (Replaces Faux)
- Power Suspend Mode
- Added fifo, fiops, sio and zen schedulers
- Added Frandom
- Kernel Selinux permissive
- Fsync control
- Compiled with updated UberTC
- General optimizations
- Battery improvements
[B]* v1.0[/B]
- Initial release
Smooth as butter, and charging so fast it's almost scary
Thank you
You need a banner for your OP which is called "KernelBae"
Anyway thanks for awesome job and new kernel.
Sent from my LG-D855 using Tapatalk
Stayn said:
Reserved
Click to expand...
Click to collapse
sorry to say but i still cant understand why this kernel when there are ARTX and Light kernels??
and is there any chance that it would work on stock rom ?
mohammadtalha93 said:
sorry to say but i still cant understand why this kernel when there are ARTX and Light kernels??
and is there any chance that it would work on stock rom ?
Click to expand...
Click to collapse
This kernel is more faster than artx and light kernels, I am of those who cannot see a little lag because that bothers me and this kernel keeps my device smooth...
I didn't tested it on stock and I don't think that it will work, anyway, I can try to build custom stock kernel but I think that it's too late now for build to marshmallow
Stayn said:
This kernel is more faster than artx and light kernels, I am of those who cannot see a little lag because that bothers me and this kernel keeps my device smooth...
I didn't tested it on stock and I don't think that it will work, anyway, I can try to build custom stock kernel but I think that it's too late now for build to marshmallow
Click to expand...
Click to collapse
COOL.....but after trying every single custom rom MM or N......i went back to modded Stock rom because of stability and Camera Quality.... and literally i have tried EVERY SINGLE ROM out there.
mohammadtalha93 said:
COOL.....but after trying every single custom rom MM or N......i went back to modded Stock rom because of stability and Camera Quality.... and literally i have tried EVERY SINGLE ROM out there.
Click to expand...
Click to collapse
I cannot use stock based ROMs, it's too much lag for me
Stayn said:
This kernel is more faster than artx and light kernels, I am of those who cannot see a little lag because that bothers me and this kernel keeps my device smooth...
I didn't tested it on stock and I don't think that it will work, anyway, I can try to build custom stock kernel but I think that it's too late now for build to marshmallow
Click to expand...
Click to collapse
Nice too See a New kernel again.. But... You sad its fast er then the other kernel of yours. I'm using the latest LightKernel, so this Ultimate kernel is faster and i want to now if this kernel is better in battery life ?
francois amon said:
Nice too See a New kernel again.. But... You sad its fast er then the other kernel of yours. I'm using the latest LightKernel, so this Ultimate kernel is faster and i want to now if this kernel is better in battery life ?
Click to expand...
Click to collapse
Light and normal kernel has better battery life that depends on how you configure it
Stayn said:
Light and normal kernel has better battery life that depends on how you configure it
Click to expand...
Click to collapse
Allright then You. I will stay with the latest Light Version.
THX for reply
Iv been on this kernel all this morning and so far its great!
PS: Is it possible to add bioshock to this kernel?
Downloaded twice fot f400, both zip corrupted.
khnoizer said:
Downloaded twice fot f400, both zip corrupted.
Click to expand...
Click to collapse
Sorry dude, I re-uploaded it
So, default cpu governor is performance? I hope it doesn't drains battery so much, since I usually prefer to just use the default setting because I believe OP have the best balanced settings there.
khnoizer said:
So, default cpu governor is performance? I hope it doesn't drains battery so much, since I usually prefer to just use the default setting because I believe OP have the best balanced settings there.
Click to expand...
Click to collapse
I don't know why your default gov is perfomance, change ir to interactive, I'll update this kernel soon... I'm a little busy for now on other things
Stayn said:
I don't know why your default gov is perfomance, change ir to interactive, I'll update this kernel soon... I'm a little busy for now on other things
Click to expand...
Click to collapse
Keep your time. You don't have to push an update all days. Let the users use it for a while and then report. One day with this kernel and report it is nothing. The system need time to get one with the kernel settings
G3X is pretty much beta. ArtX is not beta (IMO). If you want a more stable kernel use ArtX until this one gets all the kinks worked out.
Stayn said:
I don't know why your default gov is perfomance, change ir to interactive, I'll update this kernel soon... I'm a little busy for now on other things
Click to expand...
Click to collapse
I think I should also mention that I'm using RR 5.8.3 rom for F400 variant by oadam11, which is also have performance governor by default on its default kernel. Maybe there are something related.
Anyway, take your time, and thank you for your hard work.
EDIT: However, I've tried artxlight 2.1 but its governor wasn't set to performance by default. It was zzmoove.
Hi I have a little problem. When I flash through TWRP I get unsupported device and error 1. My device is d852.

Categories

Resources