[KERNEL] [MM] [OMNI] [KCAL][OTG][MTP][F2FS] [31 AUG] stranostrano kernel ver. 2.2.4 - Discontinued - ONE Android Development

S=T=R=A=N=O=S=T=R=A=N=O
Kernel
31-august-2016 update to ver 2.2.4
An OMNI based kernel for OnePlus One (aka Bacon)
Based on OMNI source
Works on OMNI and OMNI based Marsh Mellow roms.
Reported it works on official OMNI nightly, Herna HomeBuild, SlimSaber, SAOSP and OmniSense
Probably works on all other Omni based rom MM builds. Try and report
An OMNI based kernel with working MTP, OTG, KCAL, Franco's SoundControl, Boeffla touchboost, Voltage Control and other feature​
Based on OMNI NIGHTLY kernel source with the addition of Savoca's Kcal, Franco's SoundControl, Boeffla's Touchboost, Voltage Control, Simple_gpu_algorithm and other features ported from their respective sources and reworked by me .
CPU Governors
Smartmax / Interactive / Conservative / Userspace / Powersave / Ondemand / Performance / Slim / Ondemandplus / Alucard / Zzmoove / Intellimm / HYPER
16 march - added Wheatley and Slim governors
19 march - added OndemandPlus governor
12 april - added Adaptive, Darkness and Nightmare governors
15 april - added Voltage Control
24 april - added Intelliactive, Intellidemand and Alucard governors
25 april - removed Conservative, Wheatley and Yankactive cpu governors
02 may - removed all unnecessary cpufreq governors - just added Alucard to defaults
07 may - added again Slim and OndemandPlus governors
11 may - Awake CPU schedule workqueue
24 june - added zzmoove governor - thanks to @ZaneZam
27 june - fix - enabled hotplug in zzmoove governor - thanks to @kodora that has reported malfunction
31 august - added HYPER and Intellimm cpu governors and applied update to source code
GPU Governors
Cpubw_hwmon / Msm_cpufreq / Msm-adreno-tz / Userspace / Powersave / Performance / Simple_ondemand
15 april - Added Simple_gpu_algorithm
17 april - removed cpubw_hwmon because it freeze OPO
02 may - Added Adreno Idler
11 may - GPU overclock to 657MHz and idle to 27MHz
I/O Scheduler
NOOP / DEADLINE / ROW / CFQ / BFQ / TEST-IOSCHED / SIO / TRIPNDROID 19 march - added SIOPLUS, FIOPS and ZEN
Hotplug
24 april - Added Alucard hotplug
02 may - Added MSM hotplug
27 june - Added "Bricked hotplug" - thanks to @show-p1984
Custom Features & Optimizations
28 July - switched to @francisco Franco thermal control
added Adaptive Low Memory Killer
Built with UBER 4.8
KCAL v2 Control - credits to @savoca
Vibrator Intensity interface
Franco's Sound Control - credits to @franciscofranco
Boeffla TouchBoost - credits to @Lord Boeffla
Voltage Control - credits to @faux123
Simple_gpu_algorithm - credits to @faux123
Alucard hotplug - credits to @alucard_24
MSM Hotplug - credits to @myfluxy
Adreno idler - credits to @arter97
Tuned and updated Powersuspend feature on 02 May release. - thanks to @faux123 and @Yank555
Fsync on/off toggle - credits to @franciscofranco
CRC Software - disabled by default and added toggle switch.
Schedule workqueues on awake CPU and added toggle switch.
FS - added F2FS support
DISCLAIMER: flash at your own risk; I've tested for hours and all gone right. My goal was to add KCAL and other missed features to the OMNI Rom Official kernel and share with you for improve our android experience.
Contributors
stranostrano
Source Code: github.com/stranostrano
Special thanks for their source goes to: OmniRom team, savoca, herna, fermasia, derromtester, osm0sis, Francisco Franco, Lord Boeffla, Faux123, Alucard_24, myfluxi, arter97, yank555, zanezam, show-p1984 and many others.
My very special thank goes to @DerRomtester that helped me at the beginning.
Created on 28/01/2016
Updated on 31/08/2016

---

Download
current version: Ver. 2.2.4 - 31 august release
OLD RELEASE:
Ver. 2.2.3 - 28 july release
Ver.2.2.2 - 18 july release
Ver.2.2.1 f2fs - 13 july release
Ver.2.2.1 - 27 june release
Ver.2.2 - 24 june release
Ver.2.1 - 11 may release
Ver.2.0 - 07 may release
Ver.1.8.0 - 02 May release - lags fixed
Ver.1.7.3 release - deprecated - there are lags
Ver.1.7.2 release - deprecated - there are lags
Ver.1.7.1 release
Ver.1.7 release
Ver.1.6 release
Ver.1.5 release
ver 1.4 release
ver 1.3 release
ver 1.2 release
ver 1.1 release
ver 1.0 release
extras:
Screen Control App by savoca
Flashing Instructions:
- Flash through recovery (PhilZ Touch 6.59.2 and TWRP recommended)
- Clean cache (recommended)
- Reboot
- Install Kernel Adiutor or Synapse (optional)
- Have fun ...always!

---

Changelogs:
Version 2.2.4 - 31 august release
- cpu governors - added HYPER (works really good) and IntelliMM governors
- updated source code to latest omnirom commits
Version 2.2.3 - 28 july release
- thermal: switched to Francisco Franco thermal control
- managed some code
Version 2.2.2 - 18 july release
- added Adaptive Low Memory Killer (toggle available)
- disable Config_pft for secure kernel
- other fix (see source code)
Version 2.2.1_f2fs - 13 July release
- added f2fs support
Version 2.2.1 - 27 June release
- fixed zzmoove cpufreq governor - thanks to @ZaneZam
- Added "Bricked hotplug" and fixed some error
Version 2.2 - 24 June release
[/B]- Added zzmoove cpufreq governor - thanks to @ZaneZam
- fixed some bugs and security issue. (see commits @source )
Version 2.1 - 11 May release
- GPU overclock to 657MHz and idle to 27MHz;
- Disabled software CRC at boot and introduced a toggle switch;- Introduced toggled schedule workqueues on awake CPUs to save power;
- USB: cdc-acm - more sanity checking;
- Various optimization to source code.
Version 2.0 - 07 May release
- cpufreq - added OndemandPlus and Slim governor;
- Fsync on/off toggle.
Version 1.8.0 - 02 May release
- Reworked from a clean code to fix lags;
- Removed a lot of unnecessary cpu governors - now just the Omni defaults plus Alucard;
- Updated Alucard hotplug;
- Added MSM Hotplug;
- Cleaned Simple Gpu Algorithm and added Adreno Idler;
- Updated Powersuspend feature;
- Enabled some TCP congestion algorithm;
- Tuned a lot of code (my fault);
Version 1.7.3
- added again Powersuspend feature.
- removed Conservative, Yankactive and Wheatley cpu governors
Version 1.7.2
- Moved get_cpu_idle_time() to cpufreq.c to align Omni source to current standard;
- Updated and adapted to "get_cpu_idle_time()" change, all cpu governors;- Added Alucard hotplug and Alucard, Intelliactive and Intellidemand Cpu Governors;
- Added Powersuspend feature;
- Updated some code in sourceVersion 1.7.1
- Removed "cpubw_hwmon" from GPU governors because it freeze OPO
Version 1.7
- Added GPU Simple_gpu_Algorithm and Voltage Control
Version 1.6
- Added Adaptive, Darkness and Nightmare cpufreq governors
Version 1.5
- Added OndemandPlus cpufreq
- Added SIOPLUS, FIOPS and ZEN I/O scheduler
Version 1.4
- Rebased on OMNI official Source
- Added SLIM and WHEATLEY cpufreq
- Reworked KCAL feature keeping KCAL within its own source file removing unnecessary mdss_mdp_kcal_ctrl.h
Version 1.3
- Added Boeffla's TOUCHBOOST
- Added SIO and TRIPNDROID I/O Scheduler
Version 1.2:
- Added Franco's SOUNDCONTROL
- Added YANKACTIVE governor
Version 1.1:
- Fixed some bugs
Version 1:
- Added @savoca KCal

---

Hi, it sounds good, but where is the download link?

---

@stranostrano
Why didn't you base on official nightlies source?
Sent from my A0001 using Tapatalk

---

photobix said:
Hi, it sounds good, but where is the download link?
Click to expand...
Click to collapse
in the second post I think you are too fast and didn't give my time to edit the post :laugh:

---

Renosh said:
@stranostrano
Why didn't you base on official nightlies source?
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
my choice

---

Works on SAOSP. Will test for a couple days and report back.
Sent from my A0001 using XDA Labs

---

stranostrano said:
in the second post I think you are too fast and didn't give my time to edit the post :laugh:
Click to expand...
Click to collapse
Yes, found the link
It's booting with the official nightly, will test the kernel, thank you!

---

I tried the kernel and loved it ,Can I use the kernel in my ROM , OmniSense ? Only if you don't mind , also , all credits for the kernel will obviously go to you .

---

Manav Bhagia said:
I tried the kernel and loved it ,Can I use the kernel in my ROM , OmniSense ? Only if you don't mind , also , all credits for the kernel will obviously go to you .
Click to expand...
Click to collapse
Sure that you can.
Just insert a link to this tread on your thread op and don't forget to thanks all other devs.

---

I'm recompiling kernel to set "Smartmax" governor as default instead of "Interactive". I've noticed some UI lags with "Interactive" that seem solved switching to others except "ondemand".
Please, if you have lags UI, try to switch to other governor and report back.

---

Just for info: Version 1.1 is online

---

It's so good to see new OMNI kernel !!! You are a hero.
Any info on hotplugs ? Zen? Bricked ? Cannot test ATM.

---

FunkyRasta said:
It's so good to see new OMNI kernel !!! You are a hero.
Any info on hotplugs ? Zen? Bricked ? Cannot test ATM.
Click to expand...
Click to collapse
Hi funkyrasta,
Avaulable cpu Governor are in the op description.

---

To guys that are running my kernel. Please report how it works.
Thank you

---

stranostrano said:
To guys that are running my kernel. Please report how it works.
Thank you
Click to expand...
Click to collapse
It's been running good seems just as stable as stock kernel. Battery life is about the same as well which has been excellent for me.
Sent from my A0001 using XDA Labs

---

tekanina said:
It's been running good seems just as stable as stock kernel. Battery life is about the same as well which has been excellent for me.
Sent from my A0001 using XDA Labs
Click to expand...
Click to collapse
Hi mate and thank you for sharing your opinion.
Anyway, did you using kcal feature?
If you do, have noticed anomalous battery drain using it?
please report.

---

stranostrano said:
Hi mate and thank you for sharing your opinion.
Anyway, did you using kcal feature?
If you do, have noticed anomalous battery drain using it?
please report.
Click to expand...
Click to collapse
No I haven't used kcal. I just installed Color Control, I will try it out and see how it goes. Will report back.
Sent from my A0001 using XDA Labs

---

Tekanina, the color control from savoca is the app to set up the kcal kernel based feature. If you're using color control, then you have Kcal working.
What I want to kniw is if you notice anomalous battery drain compared to stock kernel.