[EOL][KERNEL][STABLE][TW][5.0.2][SM-G901F] StockKernel V1.4 - Galaxy S 5 Original Android Development

Hello all togerher, as I promised you, I'm beginning here with my own custom kernel
IF YOU FOLLOW MY STEPS BELOW, YOU WILL LOSE YOUR WARRANTY, KNOX WILL DISPLAY 0x1! I'M NOT RESPONSIBLE FOR ANY DAMAGED DEVICE!
Features of this Kernel:
- Built with latest Linaro Toolchain 5.3 GNU GCC made by ME , Cortex A15 tuned
- Latest Linux version 3.10.101, is always up to date
- Vibration strength and wake lock can be blocked threw kernel adiutor
- crc disabled (30% more performance)
- cfs/nfs/cdrom support built in
- Choose between different CPU governors: Interactive, Arteractive, Ondemand, Conservative, Userspace, Performance, Powersave, bioshock, lionheart, alucard, barry_allen, blu_active, cafactive, darkness, despair, electroactive, electrodemand, HYPER, intellidemand, intelliactive, interactive_x, intellimm, nightmare, ondemandplus, ondemand_x, pegasusq, smartassV2, smartmax, smartmax_eps, umbrella_core, yankactive, zzmoove
- CPU OC/UC AND GPU OC/UC
- MANY DIFFERENT HOTPLUGS: bricked_hotplug, zen decision, autosmp, thunderplug, msm_hotplug, intelli_plug, alucard_hotplug, mako_hotplug and blu_plug
- FauxSound V3.6 build in
- KCAL control for full control about your screen!
- Qcald v2 build in with a more updated version than samsungs stock kernel!
- Frandom support
- Voltage Control
- State Notifier included
- updated wireless drivers
- Adreno Idler build in
- Simple ondemand gpu
- Task's ADJ tree for better LMK
- Power_efficient_wq for better battery management
- CPU-Boost updated to work with state notifier (and add hotplug boost)
- Built with latest ramdisk sources from samsung (BOL1)
- Kernelsource from latest Update BOK2
- I/O schedulers: ROW (default), CFQ, Noop, deadline, test-iosched, BFQ-Iosched, fiops, sio, VR, zen, fifio, sioplus, tripndroid
- UKSM (Ultra-Kernel Samepage Merging)
- Init.d Support
- Busybox support
- Charging Control/ Fast Charge
- Allow ADB-Insecure
- ASYNC FSync from HTC
- Toggle to enable/disable fsync
- updated lowmemorykiller with better memory management
- TCP (Network) control: Cubic (default), Reno, Bic, Westwood, Highspeed, Hybla, HTCP, Vegas, Veno, Scalable, LP, Yeah and Illinois
- SeLinux is set to permissive
- restrict rooting and tima disabled
Download:
V1.3 online
Bugs/Problems:
- None
Instructions:
If you want to install the Kernel, follow this:
1. Install a custom recovery for your phone, like this one here:TWRP Recovery
2. Follow the instructions on the page above, until you get a working recovery
3. Download the Kernel from below and copy it to your external SD Card
4. Reboot to your recovery by pressing volume up, home button and power button at the same time.
5. Install zip/select the kernel
6. Wipe cache and dalvik cache (recommand)
7. Reboot
Support:
If you like my work, please hit a thanks down on my posts. A thanks is enough!:highfive: If you really really really really really like my work, you can donate something to me, but it is not necessary. I created a paypal account, just in case, someone would give me a small donation. :good:
As I said, you don't have to give me something, but this keeps me motivated to built better Kernels and keep updating everything. It's your choice, and I'm very thankfull for every donation! No matter how big it is! Thank you so much for supporting me, cheers and have a nice day :fingers-crossed:
Credits/Thanks:
- Samsung for sources
- @faux123 for all the great stuff he did for the kernels
- @Yank555
- @dorimanx!
- @neobuddy83
If you want to take my work and need it somewhere, or do other things with it, please ask me first for the permission. Otherwise you are not allowed to take it! Thank you !
XDA:DevDB Information
StockKernel kccat6, ROM for the Samsung Galaxy S5
Contributors
Tkkg1994
Source Code: https://github.com/Tkkg1994/StockKernel
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Current Stable Version: V1.4
Stable Release Date: 2016-04-18
Created 2016-03-21
Last Updated 2016-09-15

Changelog:
Changelog V1.1:
- Initial release!
Changelog V1.1:
- Added kcal control with all upates(Kernel adiutor)
- Added OC and UC for GPU (166 to 800 MHz)
- Added OC and UC for CPU (268 until 2880 MHz)
- Added faux sound version 3.7
- Added frandom support
- Added voltage control
- Added bricked_hotplug, zen decision, autosmp, thunderplug, msm_hotplug, intelli_plug, alucard_hotplug, mako_hotplug and blu_plug
Changelog V1.2:
- cpufreq: cpu-boost: export input_boost_enable to userspace
- msm: thermal: add a module param to change the thermal throttle temperature point to userspace
- input: add generic touch event listener
- cpufreq: Introduce new relation for freq selection
- cpufreq: Break out early when frequency equals target_freq
- fs: sync: Asynchronous Fsync from HTC
- fs/sync: Make sync() satisfy many requests with one invocation
- fs: fsync: add a toggle to enable or disable fsync() operations
- sync: don't block the flusher thread waiting on IO
- Writeback: Fix occasional slow sync and some other fixes to writeback
- readahead: make context readahead more conservative
- update cfq iosched
- added back all governors from novakernel (over 30 governors build in the kernel now)
- added all ioscheds back and tuned them
- updated lowmemorykiller with some mods
Changelog V1.3:
- a lot of script updates/optimisations of the makefile
- lz4 Ramdisk supported
- cifs supported
- nfs supported
- cd-rom format supported
- stackprotecter updated
- kernel mode neon included
- implement state notifier to dcache
- vibration control added, control with kernel adiutor
- Sysfs interface to Enable/Disable CRC (crc disabled means 30% more performance)
- power updates
- led, blinking support
- usb: gadget: mass_storage: added sysfs entry for cdrom to LUNs
- rbtree updates
Changelog V1.4:
- fix drivedroid
- update cpufreq (many updates)
- added support for ntfs read and write
- updated hotplug drivers
- more things I may forgot

Reserved

It will working on NovaRom 1.5.5 or only StockRom?

DienoX said:
It will working on NovaRom 1.5.5 or only StockRom?
Click to expand...
Click to collapse
Should work on both
Sent with my Nova powered SM-G901F

More to come: differnet hotplugs, Sound control, kcal control and governors!
Sent with my Nova powered SM-G901F

Hi and thanks !
But still no deep sleep after speedtest, someone with the same problem ?
Thanks for the job ! Great kernel !
Envoyé de mon SM-G901F en utilisant Tapatalk

Hi, will it work on G906 models?

I have a problem with his headphones, there are sizzling . StockRom & stockkernel
Envoyé de mon SM-G901F en utilisant Tapatalk

CPU boost
Using Nova 1.5.5.So with Kernel Aduitor,is it right to enable CPU boost with all 4 cores to the maximum value (2457),or not?(Installed v1.0 using Philz Recovery.Phone seems to run better and faster than Guyver 0.9).

PhilCapron said:
Using Nova 1.5.5.So with Kernel Aduitor,is it right to enable CPU boost with all 4 cores to the maximum value (2457),or not?(Installed v1.0 using Philz Recovery.Phone seems to run better and faster than Guyver 0.9).
Click to expand...
Click to collapse
first: it's ok to run all 4 cores set on max value with all governors except performance
second: how did you figure it runs better and faster than Guyver's 0.9? There's no freakin' way !!!
the only kernel that runs better than Guyver's is @Tkkg1994 custom kernel witch is still in progress and we all wait for a stable version

artaniss11k said:
first: it's ok to run all 4 cores set on max value with all governors except performance
second: how did you figure it runs better and faster than Guyver's 0.9? There's no freakin' way !!!
the only kernel that runs better than Guyver's is @Tkkg1994 custom kernel witch is still in progress and we all wait for a stable version
Click to expand...
Click to collapse
Antutu scores are higher with this Kernel than 0.9,FWIW.

PhilCapron said:
Antutu scores are higher with this Kernel than 0.9,FWIW.
Click to expand...
Click to collapse
Antutu with Guyver's kernel: 76.792
Antutu with Tkgg1994's custom OC kernel : 79.535
What's your score with the stock one?

artaniss11k said:
Antutu with Guyver's kernel: 76.792
Antutu with Tkgg1994's custom OC kernel : 79.535
What's your score with the stock one?
Click to expand...
Click to collapse
Not getting those numbers with stock or guyver.
62 with 0.9.64 with v1.0.

Changelog V1.1:
- Added kcal control with all upates(Kernel adiutor)
- Added OC and UC for GPU (166 to 800 MHz)
- added OC and UC for CPU (268 until 2880 MHz)
- Added faux sound version 3.7
- added frandom support
- added voltage control
- Added bricked hotplug, zen decision, autosmp, thunderplug, msm_hotplug, intelli_plug, alucard_hotplug, mako_hotplug and blu_plug
- Some things I may forgot
for full changelog visit here: Kernel commits
download on the first page, second post

I have a problem with headphones, there are sizzling . StockRom v1.0 & stockkernel v1.0 & v1.1 too.
With StockRom built in kernel haven't problem.

Agadoo said:
I have a problem with headphones, there are sizzling . StockRom v1.0 & stockkernel v1.0 & v1.1 too.
With StockRom built in kernel haven't problem.
Click to expand...
Click to collapse
Same problme here.
Envoyé de mon SM-G901F en utilisant Tapatalk

netsba said:
Same problme here.
Envoyé de mon SM-G901F en utilisant Tapatalk
Click to expand...
Click to collapse
Agadoo said:
I have a problem with headphones, there are sizzling . StockRom v1.0 & stockkernel v1.0 & v1.1 too.
With StockRom built in kernel haven't problem.
Click to expand...
Click to collapse
netsba said:
I have a problem with his headphones, there are sizzling . StockRom & stockkernel
Envoyé de mon SM-G901F en utilisant Tapatalk
Click to expand...
Click to collapse
What do you mean with 'sizzling'?
I didn't notice anything different sound whise.
If you can explain to me what is happening while listening to music I can maybe help
Sent with my Nova powered SM-G901F

Without headphones I have a normal sound. With the headphones I have a very active and annoying background noise
Envoyé de mon SM-G901F en utilisant Tapatalk

@Tkkg1994
this v1.1 of the stock kernel is the stable version of your famous and long awaited custom kernel ?

Related

[KERNEL] [CAF] AuxXxilium's NexXxt Kernel

AuxXxilium's NexXxt Kernel for Nexus 5
Only for CyanogenMod and CAF based Roms
---------------------------------------------------------------------------------------------------------------------------------------------------------
Features - MSM and MPDEC
CPU
Overclock
Undervolt
Gov: interactive, intelliactive, nightmare, pegasusq, ondemand, ondemandplus, performance
CAF Driver
CPU Hotplug and Thermal adjustable by user (only MPDEC Build)
CPU Hotplug Optimized and Thermal removed (only MSM Build)
GPU
CAF Driver
FS
I/O Scheduler: noop, deadline, row, cfq, bfq, fiops, sio, zen, vr
Dynamic_Fsync
Async_Fsync
ExFAT
NTFS R/W (upcoming)
Readahead: 1024KB
USB OTG and Automount
RAM
KSM
zRAM
DISPLAY
Gamma Control
Backlight Dimmer
DT2W and S2W/S2S
Sound
Sound Control
NET
TCP Tweaks
TCP Cong: westwood, cubic, reno, bic, highspeed, hybla, htcp, vegas
MISC
Powersuspend
BLX (Battery Life Extender)
FastCharge v2
Frandom
Kexec Hardboot
Entropy Tweaks
Many other Tweaks, Batterysavings and Features
Linux Upstream to 3.4.82
Hybrid Features from Linux Kernel 3.7 - 3.11
APP
Compatible with Nexus 5 gamma reverse engineering App
Compatible with franco.kernel Updater (FKU) App
Compatible with TricksterMod
Compatible with Faux Kernel Enhancement Pro
Compatible with Faux Sound App
Compatible with Screen dimmer and fast charge modules
BUILD
Compiled on Ubuntu 13.10
Compiled with VFP Hardfloat
Compiled with Linaro 4.7.4 (2014.01) optimized for A15
Compiled with -o2 flag -> better than -o3 (causes microlags)
---------------------------------------------------------------------------------------------------------------------------------------------------------
Features - MINI
CPU
Overclock
Undervolt
Gov: interactive, intelliactive, ondemand, ondemandplus
CAF Driver
CPU Hotplug Optimized and Thermal removed
GPU
CAF Driver
FS
I/O Scheduler: noop, deadline, row, cfq, bfq, fiops, sio, zen, vr
Readahead: 1024KB
USB OTG and Automount
RAM
KSM
DISPLAY
Gamma Control
Backlight Dimmer
NET
TCP Tweaks
TCP Cong: westwood, cubic, reno, bic, htcp, vegas
MISC
Powersuspend
Kexec Hardboot
Entropy Tweaks
Many other Tweaks, Batterysavings and Features
Linux Upstream to 3.4.82
Hybrid Features from Linux Kernel 3.7 - 3.11
Full Compatible with TricksterMOD and FauxClock
APP
Compatible with Nexus 5 gamma reverse engineering App
Compatible with franco.kernel Updater (FKU) App
Compatible with TricksterMod
Compatible with Faux Kernel Enhancement Pro
Compatible with Screen dimmer and fast charge modules
BUILD
Compiled on Ubuntu 13.10
Compiled with VFP Hardfloat
Compiled with Linaro 4.7.4 (2014.01) optimized for A15
Compiled with -o2 flag -> better than -o3 (causes microlags)
---------------------------------------------------------------------------------------------------------------------------------------------------------
Changelog
+ v0.3 - come tomorrow - latest in beta folder
- NTFS R/W support
- Kernel cleanup and remove some debugging "****"
+ v0.2.5
- RWSEM Backport from Linux Kernel 3.10
- some other updates
+ v0.2.1 (only MPDEC)
- added user tuneable thermal
+ v0.2
- Linux Upstream to 3.4.82
+ v0.1
- initial release
---------------------------------------------------------------------------------------------------------------------------------------------------------
Download
Donate
Twitter
Source
Credits
CyanogenMod
Faux123
Yank555.lu
franciscofranco
showp1984
neobuddy89
flar2
TomorrowLand_Ace
Donaters (Thanks to all)
daavid1995
Nice. Always like new kernel development!
Sent from my Nexus 5
What's sweet is this is another CAF kernel. gonna give this one a go.
AuxXxilium said:
CPU Gov: interactive, ondemand, ondemandplus, abyssplugv2, smartassH3, conservative, performance
Click to expand...
Click to collapse
Smartassh3 is unstable; will cause random reboot.
So I'm guess your kernels are not working with cataclysm
If not I'm still using 9.0-9.2
neobuddy89 said:
Smartassh3 is unstable; will cause random reboot.
Click to expand...
Click to collapse
i tried it with games, benchmark and much more - no problem found. what have you done to cause this issue?
yyz71 said:
So I'm guess your kernels are not working with cataclysm
If not I'm still using 9.0-9.2
Click to expand...
Click to collapse
no it's for CM - sry but if you need it for cataclysm i can compile it with stock ramdisk. let me know
Thank you for this. Looks great can't wait to try it out
Sent from my Nexus 5 using Tapatalk
Why are you removing Franco sound?I've always been on Franco kernel just for the mod sound
Sent from my Nexus 5 using Tapatalk
I build different the next days. Faux sound includes more things to setup
You can use the older build, it is the same than the build with faux.
AuxXxilium said:
no it's for CM - sry but if you need it for cataclysm i can compile it with stock ramdisk. let me know
Click to expand...
Click to collapse
I'll surely be up for that :good:
AuxXxilium said:
no it's for CM - sry but if you need it for cataclysm i can compile it with stock ramdisk. let me know
Click to expand...
Click to collapse
OK, one question boss, does this mean you gonna make 2 versions? one for stock roms and one for cyanogenmod ROMs? that would be great
Sent from my Nexus 5 using Tapatalk
Juansegovia20 said:
OK, one question boss, does this mean you gonna make 2 versions? one for stock roms and one for cyanogenmod ROMs? that would be great
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Yes
uploading new version:
+ next-...-[02-03]-[17-30]
- remove smartassH3 - stuck in highest clock
- init aosp and cm build
+ next-...-[02-03]-[18-00]
- implement new hashtable
- remove Faux Sound and go back to Franco Sound Control (little knocking issiue with faux Sound)
can anyone try the aosp for me? i can't do it today. thx
AuxXxilium said:
uploading new version:
+ next-...-[02-03]-[17-30]
- remove smartassH3 - stuck in highest clock
- init aosp and cm build
+ next-...-[02-03]-[18-00]
- implement new hashtable
- remove Faux Sound and go back to Franco Sound Control (little knocking issiue with faux Sound)
can anyone try the aosp for me? i can't do it today. thx
Click to expand...
Click to collapse
Sweet thanks man :good:
Just tried aosp one 18:00 doesn't boot will the next on a try.. Nope second one didn't boot either..
yyz71 said:
Sweet thanks man :good:
Just tried aosp one 18:00 doesn't boot will the next on a try.. Nope second one didn't boot either..
Click to expand...
Click to collapse
i download cataclysm to see what is changed in ramdisk
Doesnt work with Beanstalk.
AuxXxilium said:
i download cataclysm to see what is changed in ramdisk
Click to expand...
Click to collapse
An IOMMU Heap is removed in CM Kernel which is needed by stock.
Changing ramdisk won't help.
stevew84 said:
Doesnt work with Beanstalk.
Click to expand...
Click to collapse
cm version doesn't work?
AuxXxilium said:
cm version doesn't work?
Click to expand...
Click to collapse
I clean installed the newest Beanstalk, booted up for a few minutes, went back and flashed the CM version and it was stuck on the Google screen. It seemed like a glitch because the LED was working while on the Google screen and that never happens. Either way wouldn't boot.

[CAF][Kernel] TeamAT NexXxt Kernel [full featured, fast and battery friendly]

TeamAT NexXxt Kernel for Nexus 5
Only for CyanogenMod and CAF based Roms
Team: AuxXxilium and TomorrowLand_Ace
First post: GCC Version - Compiled with GCC 4.8.2 -O2 optimizations and AOSP Patches
Second post: SaberMod Version - Compiled with SaberMod 4.8.3 -O3 optimizations
---------------------------------------------------------------------------------------------------------------------------------------------------------
Features - MSM, MPDEC and STOCK
HOTPLUG
CPU Hotplug and Thermal adjustable by user (only MPDEC Build)
CPU Hotplug optimized and Thermal removed (only MSM Build)
CPU Qualcomm MPDecision and Thermal (only STOCK Build)
CPU
Overclock
Undervolt
Gov: interactive, intelliactive, nightmare, pegasusq, ondemand, ondemandplus, performance, wheatley
CAF Driver
GPU
CAF Driver
FS
I/O Scheduler: noop, deadline, row, cfq, bfq, fiops, sio, zen, vr
Dynamic_Fsync
Async_Fsync
ExFAT
NTFS R/W
Readahead: 512KB
USB OTG and Automount
RAM
KSM
zRAM
DISPLAY
Gamma Control
Backlight Dimmer
DT2W and S2W/S2S
Sound
Faux Sound Control
NET
TCP Tweaks
TCP Cong: westwood, cubic, reno, bic, highspeed, hybla, htcp, vegas
MISC
Powersuspend
BLX (Battery Life Extender)
FastCharge v2
Frandom
Kexec Hardboot
Entropy Tweaks
Many other Tweaks, Batterysavings and Features
Linux Upstream to 3.4.82
Hybrid Features from Linux Kernel 3.7 - 3.11
APP
Compatible with Nexus 5 gamma reverse engineering App
Compatible with franco.kernel Updater (FKU) App
Compatible with TricksterMod
Compatible with Faux Kernel Enhancement Pro
Compatible with Faux Sound App
Compatible with Screen dimmer and fast charge modules
BUILD
Compiled with VFP Hardfloat
---------------------------------------------------------------------------------------------------------------------------------------------------------
Features - MINI
HOTPLUG
CPU Hotplug optimized and Thermal removed
CPU
Overclock
Undervolt
Gov: interactive, intelliactive, ondemand, ondemandplus, wheatley
CAF Driver
CPU Hotplug Optimized and Thermal removed
GPU
CAF Driver
FS
I/O Scheduler: noop, deadline, row, cfq, bfq, fiops, sio, zen, vr
Readahead: 512KB
USB OTG and Automount
RAM
KSM
DISPLAY
Gamma Control
Backlight Dimmer
NET
TCP Tweaks
TCP Cong: westwood, cubic, reno, bic, htcp, vegas
MISC
Powersuspend
Kexec Hardboot
Entropy Tweaks
Many other Tweaks, Batterysavings and Features
Linux Upstream to 3.4.82
Hybrid Features from Linux Kernel 3.7 - 3.11
Full Compatible with TricksterMOD and FauxClock
APP
Compatible with Nexus 5 gamma reverse engineering App
Compatible with franco.kernel Updater (FKU) App
Compatible with TricksterMod
Compatible with Faux Kernel Enhancement Pro
Compatible with Screen dimmer and fast charge modules
BUILD
Compiled with VFP Hardfloat
---------------------------------------------------------------------------------------------------------------------------------------------------------
Changelog
+ v0.5.2 UPCOMING
- try out a complete new config - more fluid
+ v0.5.1
- hopeful it fixes freezes
- no more STOCK build. MPDEC do this job better
+ v0.5
- CAF Updates
- added CPU Gov: Wheatley
- back to old Compiler for now
+ v0.4.1
- new Compiler for more butter
+ v0.4
- NEW Build as STOCK with Qualcomm MPDecision
- Kernel cleanup
- bulk update
- Compiled with GCC 4.8.2 with AOSP Patches
- now hosted at: http://d-h.st/users/AuxXxilium
+ v0.3
- NTFS R/W support
- Kernel cleanup and remove some debugging "****"
+ v0.2.5
- RWSEM Backport from Linux Kernel 3.10
- some other updates
+ v0.2.1 (only MPDEC)
- added user tuneable thermal
+ v0.2
- Linux Upstream to 3.4.82
+ v0.1
- initial release
---------------------------------------------------------------------------------------------------------------------------------------------------------
Download Kernel
Download CM Linaro 4.8 Builds
You can report a BUG here.
Here you can write a short REVIEW to this kernel.
If you think you need a new FEATURE, please write it down here.
Twitter
Source
Credits
CyanogenMod
Faux123
Yank555.lu
franciscofranco
showp1984
neobuddy89
flar2
TomorrowLand_Ace
smooth123
XDA:DevDB Information
[CAF][Kernel] TeamAT NexXxt Kernel [full featured, fast and battery friendly], a Kernel for the Google Nexus 5
Contributors
AuxXxilium, TomorrowLand_Ace
Kernel Special Features: CAF OC UV DT2W SOUNDCONTROL FSYNC KSM POWERSUSPEND
Version Information
Status: Stable
Current Stable Version: v0.5.1
Stable Release Date: 2014-03-02
Current Beta Version: b0.6
Beta Release Date: 2014-03-02
Created 2014-03-02
Last Updated 2014-03-02
thanks a lot
awesome work bro..
Battery life
Has it improves?
Sent from my Nexus 5 using Tapatalk
Frickin sweet!!!
Sent from my PARANOID HAMMERHEAD
CRIME INC. said:
Frickin sweet!!!
Sent from my PARANOID HAMMERHEAD
Click to expand...
Click to collapse
yogendrapatel said:
Battery life
Has it improves?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Kernel is outdated since AuxXxilium is gone from xda, and I decided to move on in a new project.
Can bring some incompatibilities with newest cm sources
Enviado do meu Nexus 5 através de Tapatalk

[kernel] Collection of kernels from different Custom-ROMs for S3mini - i8190

1.
Before you flash any kernel here,
- read the ROMs thread about issues and bugs!
- do a full backup of your existing system!
- make sure you know exactly what you are doing!
I will NOT take any response if you brick your phone in any case!!!
Let's do the party...
Because I was always missing some kernel threads for our nice device I decided to start with a collection of available kernels.
To expand that collection YOUR help is highly appreciated!!!
- Please report kernels not/working with ROMs
- Please report if you know about updates.
- Feel free to post kernels here - but please, do not forget to ask about permissions and to give proper credits!
Overview:
Chaco kernel by ChacoX
Novafusion kernel by Novafusion.pl
PA kernel by tenshi_xp
Anykernel by Android-Andi
NEXT-Kernel [SINGLE/DUAL BOOT] by Android-Andi
CroPol kernel [CPU OC][GPU OC][F2FS] by ChromeMonochrome & yanpol199
OmniROM kernel by golden_guy
OmniROM kernel by Fred6681
1N4148's kernels
Stock kernels and modems
Thanks to koragg97 for the link
Feel free to add any kernel you find. Links to posts with new kernels will be added here as soon as I have a little time.
If you need a template for flashing the boot.img (and modules), here you are:
http://goo.gl/bzSIfC
We also have a
Kernel zip to tar to flash it with odin
http://forum.xda-developers.com/showthread.php?t=1644240
for some emergency cases...
Ach ja, I don't take any credits!
All credits belong to the developers!!!
Special Thanks to:
- OliverG for his continously useful sources.
- A never forgotten chinese guy who leaked some rare sources.
Have fun!
Chaco-Kernel by chacoX
This kernel got the first post because I was using this .zip by replacing the boot.img and the system/lib/modules to create flashable zips for the kernels I extracted.
Thanx ChacoX. Sorry that it went so silent in your thread...
[KERNEL CM11/Carbon4.4.2/AOKP4.4.2/CM10.2] Chaco kernel 20140116
http://forum.xda-developers.com/showthread.php?t=2604174
- Expected NOT to work with f2fs
Novafusion-Kernel by Novafusion
This kernel is extracted from
[ROM][4.4.4] Carbon 4.4.4 20140707 [FULLY WORKING] ( ͡° ͜ʖ ͡°)
http://forum.xda-developers.com/showthread.php?t=2641289
with a 'silent' permission of New Maclaw.
All credits to him and the Novafusion Team!
-----------------
Latest:
NF-kernel 20141101
https://app.box.com/s/9yox0u7p5wekdmbe416l
- Switch to single platform RTC driver - AB500 (clock freeze fix)
---------------------
NF-kernel 20140814
- SElinux enabled
http://goo.gl/n5tilS
---------------------
NF-kernel 20140724
-Kernel Update GT-I8190_JB_Opensource_Update2
http://goo.gl/XCtke6
I took it from here
http://forum.xda-developers.com/showthread.php?p=54372738
Note:
tenshi_xp gave Novafusion users an option to switch back easily system partition to ext4, read more here
http://forum.xda-developers.com/showthread.php?p=54354688
I included the files to the kernel package - by flashing you will find msfa already at system together with the modified updater_script (as .txt).
---------------------
NF-kernel 20140612
http://goo.gl/LH7fBu
Sorry for the wrong build date at the file name... it was extracted from the names ROM release...
-----------------
- Expected to work on all 4.4.x ROMs
Kernels by tenshi_xp
This kernel is extracted from
[ROM][UNOFFICIAL][KitKat 4.4.4][golden]ParanoidAndroid 4.4 [04-07-2014][AOSPA]
http://forum.xda-developers.com/showthread.php?t=2804996
with friendly permission of tenshi_xp. All credits to him!
It is based on Novafusion kernel with some additional features:
Features:
- Kernels are available for EXT4 and F2FS just for working offline charging
- Governors: abysplug, lulzactiveq, ZenX, zeneractive, intelliactve, sakutactive, pegasusq, hotplug, interactiveq, conservative, ondemand, userspace, powersave, interactive, performance
- Shedulers: noop, deadline, cfq, sio, row, zen, fifo, sioplus
- ZRam: 144Mb
- OverClock 100 - 1200Mhz
- LiveOpp 2.0.2 by cocafe
- Single platform RTC driver by golden-guy
- ABBamp Sound Control v. 2.5.0
- Enabled SELinux
- LZ4 compression
- Enabled Unaligned access
- Disabled KSM
- Exfat driver v1.2.7
- Multi-core scheduler support
- SDcard read 384kb
- 314MB of extra space in SdCard2
- Compiled with Linaro 4.8
- Expected to work on all 4.4.x ROMs
-----------------
Latest:
Kernel-Package 2014-11-16
Aroma-Installer
http://www.mediafire.com/download/1p645cfjai7l9zj/GT-I8190-KERNEL-3on.zip
Changelog (for option 2 and 3):
- Proportional Rate Reduction for TCP
- customize some values for zenx, zeneractive, intelliactive
- exFat: driver updated to version 1.2.9
- Liveopp delete 1.15Ghz and add 1.2Ghz
-----------------
Kernel-Package 2014-11-09
Aroma-Installer
- removed 100-300-500-700-900Mhz frequencies
Flashable kernelinstaller give you have 3 options
1st.- Normal kernel*1
2nd.- Kenel with CPU OC + GPU OC*2
3rd.- Kernel wirh CPU OC + GPU OC + ABBamp Sound*3
*1 For normal users.
*2 For users who like something more powerful without the connect/disconnect USB on pc, deleted 100-300-500-700-900Mhz frequencies for friendly frequency scaling.
*3 For users who like all changes, deleted 100-300-500-700-900Mhz frequencies for friendly frequency scaling. this is the kernel is included in PAC release
-----------------
Kernel-Package 2014-11-02
Aroma-Installer
This time the kernel installer give you 3 options
1st.- Normal kernel, last working kernel previous to CPU OC implementation*1
2nd.- Kenel with CPU OC + GPU OC*2
Changelog
Kernel in Ofast + JustArchiV3 + Linaro GCC 4.9
Frecuency scaling friendly
CPU freq screen off limits
3rd.- Kernel wirh CPU OC + GPU OC + ABBamp Sound*3
Changelog
Kernel in Ofast + JustArchiV3 + Linaro GCC 4.9
*1 For normal users, Havent applied the clock freeze fix, but will be updated next time
*2 For users who like something more powerful without the connect/disconnect USB on pc, deleted 100-300-500-700-900Mhz frequencies for friendly frequency scaling, cpu freq screen off limits set to Min 200Mhz, Max 800Mhz
*3 For users who like all changes, this is the kernel added in the las PAC release, will receive most of the option 2 changes in next update
------------------
OC-kernel 2014-11-02
Aroma-Installer
http://www.mediafire.com/download/5pppy887i4wo914/GT-I8190-KERNEL_49.zip
Kernel in Ofast + JustArchiV3 + Linaro GCC 4.9
----------------
OC-kernel 2014-10-30
Aroma-Installer
http://www.mediafire.com/download/974sm3m9pok5r4g/GT-I8190-KERNEL_sc.zip
- fixed crackling voice at call
-----------------
OC-kernel 2014-10-27
Aroma-Installer
http://www.mediafire.com/download/h3ccmwf67b1ux3x/GT-I8190-KERNEL_2sc.zip
- add LiveOpp updated to 2.0.2 by @cocafe
Frecuencies from 100Mhz to 1.2Ghz, 200Mhz-1Ghz by default
- Single platform RTC driver by golden-guy
Notes:
This is an Aroma-installer provided by tenshi_xp
You can select if your system is ext4 or f2fs to choose the right kernel.
NovaThorSettings will be installed as well.
If you have mount/unmount usb in pc, dissable sounds.
-----------------
OC-kernel 2014-10-21
add ABBamp Sound Control v. 2.5.0
add lulzactiveq
To control ABBamp, GPU OC and more NovaThorSettings is included.
For elder kernels you can flash this NovaThorSettings (updated)
Freq: 100, 200, 300, 400, 600, 800, 1000, 1050, 1100, 1150
Governors: abysplug, lulzactiveq, ZenX, zeneractive, intelliactve, sakutactive, pegasusq, hotplug, interactiveq, conservative, ondemand, userspace, powersave, interactive, performance
Shedulers: noop, deadline, cfq, sio, row, zen, fifo, sioplus
ZRam: 144Mb
http://goo.gl/0CEhU4 for EXT4
http://goo.gl/by7ALo for F2FS
EXT4 and F2FS kernels are similar, just offline charging is dependent by FS.
tenshi_xp said:
Hello guys, Rox- from TeamCanjica give us the permission for use their app, NovaThorSettings, that will allow to us change the values in GPU OC, by default is overclocked to 480Mhz, stock value is 400Mhz. Also allow to us change the TCP congestion, change deep sleep state(dont try the other option under power menu, kernel dont support that) and know boot time. Next version will include the app by default, but atm you must flash this NovaThorSettings
Click to expand...
Click to collapse
-----------------
OC-kernel 2014-10-08
Aroma-Installer
Freq: 100, 200, 300, 400, 600, 800, 1000, 1050, 1100, 1150
Governors: abysplug, ZenX, zeneractive, intelliactve, sakutactive, pegasusq, hotplug, interactiveq, conservative, ondemand, userspace, powersave, interactive, performance
Shedulers: noop, deadline, cfq, sio, row, zen, fifo, sioplus
ZRam: 144Mb
OC-kernel
http://www.mediafire.com/download/wbvj39lqgirclgg/GT-I8190-KERNEL_exp.zip
EXT4 and F2FS kernels are similar, just offline charging is dependent by FS.
-----------------
EF-kernel 2014-10-01
Aroma
If some one wanna try kernel with extended frequencies(100MHZ, 600MHZ) no oc, stable.[/QUOTE]
Booted fine tenshi-xp's PAC!
--------------------
PAC-kernel 2014-09-15
for f2fs
http://goo.gl/kdGTJW
https://app.box.com/s/twuyp1b76zwjfg9mmlz6
PAC-kernel 2014-09-15
for ext4
http://goo.gl/EcaYqR
https://app.box.com/s/48a9i5yw7z15wtifehz1
I extracted them from PAC-ROM build 2014-09-15 this time.
Both kernels should be the same except the ability of offline charging which is depending by file system.
Have fun!
------------------
PA-kernel 2014-08-20
Enable SELinux
LZ4 compression
Fix zen scheduler
Add zeneractive governor
Enable Unaligned access
Disable KSM
Exfat driver update to v1.2.7
http://goo.gl/lcs1Wj
---------------
PA-kernel 2014-08-06
- Added Multi-core scheduler support
- Better SDcard read from 256kb to 384kb
- Zram from 128Mb to 144Mb
- Compiled with Linaro 4.8
http://goo.gl/6uNxpT
Note: will not boot some novafusion ROMs...
-----------------
PA-kernel 2014-07-23
Updated Novafusion sources
- Kernel Update GT-I8190_JB_Opensource_Update2
-Toolchain updated
Cross Compiler Toolchains Linaro GCC 4.9.1-20140710 by Christopher83
http://goo.gl/cQCvUa
Note:
tenshi_xp gave us Novafusion users an option to switch back system partition to ext4 easily, read more here
http://forum.xda-developers.com/showthread.php?p=54354688
I included the files to the new kernel package - by flashing you will find msfa already at system together with the modified updater_script (as .txt).
With this kernel I changed updater_script to get access to f2fs as well as ext4. Didn't work before...
I replaced
mount("ext4", "EMMC", "/dev/block/mmcblk0p22", "/system");
with
run_program("/sbin/busybox", "mount", "/system");
-----------------
PA-kernel 2014-07-16
-Added FIFO scheduler
-Added Zenx governor
-Toolchain updated
Cross Compiler Toolchains Linaro GCC 4.9.1-2014.06 by Christopher83
http://goo.gl/EwIdcB
Notes:
Try Sakuractive + Fifo, or Zenx +Zen
With Zenx have better performance and still save battery no like Sakuractive.
And maybe this will help to save a little battery if you have these wakelock secril_fd-interface
-----------------
PA-kernel 2014-07-09
- removed ROW sheduler
- ZRAM improvements
http://goo.gl/56zx3H
-----------------
Initial release:
PA- kernel 2014-07-04
-Added SIOPLUS, ZEN and ROW as scheduler
-Added SAKURACTIVE as governor
-Better sdcard reads
-KSM support
-128Mb of ZRAM (!!!)
-314MB of extra space in SdCard2
http://goo.gl/3Es4zK
Have fun!
Anykernel by Android-Andi
Features
3.0.31 Stable Kernel and 3.0.44 "Beta" Kernel available - choose the one you like
3.0.44 "Beta" Kernel includes latest"GT-I8190_JB_Opensource_Update2" and
"GT-I8190L_LA_JB_Opensource" changes
BLN Support
Nice looking AROMA Installer (screenshots later):
the installer will only replace the zImage of your current flashed boot.img
and still use the ramdisk wich comes with the original boot.img
- that's why it works on every Android 4.4.4 Rom
compiled using GCC 4.7 for better compatibility
.... more will be listed later
All information about this kernel you can find here:
http://forum.xda-developers.com/showthread.php?p=54421404
---------
kernel 3.0.31 and 3.0.44 are here
http://forum.xda-developers.com/showthread.php?p=53781894
kernel 3.0.101 here
http://forum.xda-developers.com/showthread.php?p=53679550
---------
Anykernel 1.3 2014-07-23
http://forum.xda-developers.com/showthread.php?p=54350556
---------
Anykernel v1.4 2014-07-24
http://forum.xda-developers.com/showthread.php?p=54378793
---------
Anykernel 3.0.31 2014-07-26
moonryder extracted kernel stable 3.0.31+ with added schedulers and governors from latest AA build and made a flashable zip.
http://forum.xda-developers.com/showthread.php?p=54523704
---------
Expected to work on all ROMs
!!! - no support for f2fs (yet?) - !!!
Confirmed working at
- OmniROM 4.4.4 by golden_guy
- SlimKat 4.4.4
- VanirAOSP 4.4.2
golden_guy's kernel
[ROM][4.4.4] OmniROM for GT-I8190 S3 Mini
http://forum.xda-developers.com/showthread.php?t=2666235
It would be a nice project for some of YOU to extract this one
Expected to work on all ROMs
!!! - no support for f2fs (yet?) - !!!
OmniROM-kernel by Fred6681
Fred6681 opened his own kernel thread. For latest releases please visit
http://forum.xda-developers.com/showthread.php?t=2898666
[kernel] F_kernel 4.4.x ROMs NO F2FS
------------------
Latest here:
26/07/2014 - Kernel 3.0.44 --> http://d-h.st/7sE
10/08/2014 - Kernel 3.0.57 --> http://d-h.st/RwC
23/08/2014 - Kernel 3.0.101 --> http://d-h.st/uoI
Github --> https://github.com/Fred6681?tab=repositories
----------------------
This kernel is made by Fred6681, perhaps more for his own use - there is no thread. His post: http://forum.xda-developers.com/showthread.php?p=54030746
Special Thanks for sharing it here!!!
It's a 3.0.44 kernel made for Golden-guy's OmniROM 09/07/2014
with:
- JustArchis Optimization v3
- compiled with Linaro 4.9.1
- added I/O Scheduler: SIO and Zen
- added governor: Smartass v2
Kernel --> http://d-h.st/unL
Github --> https://github.com/Fred6681?tab=repositories
------------------
Update 14.07.2014
Optimization JustArchi v3
Compiled with Linaro 4.9.1
I/O Scheduler:
- noop
- deadline
- cfq
- sio
- Zen
Governor:
- Sakuractive
- SmartassV2
- Abyssplug
- Ondemand
- Powersave
- InteractiveX
- Interactive
- Performance
Kernel --> http://d-h.st/jzv
Github --> https://github.com/Fred6681?tab=repositories
------------------
Update 20140726
Based now on Android-Andi's 3.0.44 kernel
with
- New Samsung sources
- Optimization JustArchi v3
- Compiled with Linaro 4.9.1
I/O Scheduler :
- noop
- deadline
- cfq
- sio
- Zen
Governor :
- Abyssplug
- Ondemand
- Powersave
- Performance
- SmartassV2
- Sakuractive
- InteractiveX
Kernel --> http://d-h.st/7sE
Github --> https://github.com/Fred6681?tab=repositories
-----------------
Update 20140823
Optimization JustArchi v3
Compiled with Linaro 4.9.1
I/O Scheduler :
- noop
- deadline
- cfq
- sio
- Zen
- sio+ (only in kernel 3.0.101)
- row. (only in kernel 3.0.101)
Governor :
- Abyssplug
- Ondemand
- Powersave
- Performance
- SmartassV2
- Sakuractive
- InteractiveX
26/07/2014 - Kernel 3.0.44 --> http://d-h.st/7sE
10/08/2014 - Kernel 3.0.57 --> http://d-h.st/RwC
23/08/2014 - Kernel 3.0.101 --> http://d-h.st/uoI
Github --> https://github.com/Fred6681?tab=repositories
-----------------
Expected to work on all ROMs
!!! - no support for f2fs (yet?) - !!!
Confirmed working at:
- SlimKat 4.4.4 by Android-Andy
- OmniROM 4.4.4 ay golden_guy
- Vanir 4.4.4
sonin.n's kernel
It's based on Anykernel by Android-Andi with some additions
New governors:
* sakuractive
* zenx
* interactivex
New schedulers:
* sioplus
* zen
* vr
Builded with Novafusion GCC 4.9 and installation script is based on one from @Fred6681..
The original post and download:
http://forum.xda-developers.com/showthread.php?p=54387606
1N4148's kernels
- based on Novafusion/CroPol/TenshiXP/CoCafe (cherry picking from each one)
1N4148 said:
It's hard to explain the cherry picks, CroPol was to experimental for me, so I've switched back to tenshixp as base, reverted some things back to Novafusion, grabbed some updates to LiveOPP from CoCafe, ...
Goal was stability & max battery
Click to expand...
Click to collapse
Features:
- added zzmoove governor,
- disabled usecase governor
- 148Mb ZRam
- disabled screen off limiter
- added LiveOPP from CoCafe with dynamic voltages
- F2FS and exFAT support
- Blinking BLN
- CPU frequency from 200-1200MHz (defaults 200/1000), no automatic calibration to AVS values at the moment
- GPU frequency from 128-708MHz (defaults 384/448) with a simple scaling with more intermediate frequencies (64MHz step width), no automatic calibration to AVS values at the moment
- Reworked the gpu code
- new gpu scaling driver (reworked gpu scaling driver from CoCafe)
- GPU frequencies stats
- Enabled PM_MAX power saving for bcmdhd (low power wifi when screen off)
- SoC deep idle state 4 as default
- Universal installer for all ROMs (patches ramdisk with new kernel)
- optional with old wifi driver before JB2 update from Samsung
github for sources: https://github.com/1N4148/s3mini/tree/1n4148-release
Latest:
1N4148 opened his own thread, you can find latest builds there:
http://forum.xda-developers.com/showthread.php?t=2959201
30.11.2014
Now with stats for GPU frequency in /sys/kernel/mali/mali_stats
http://forum.xda-developers.com/showthread.php?p=57158326
---------------
29.11.2014
2 new builds:
- new gpu scaling driver
- one build with the old wifi driver before JB2 update from Samsung
http://forum.xda-developers.com/showthread.php?p=57135293
---------------
29.11.2014
- Reworked the gpu code
http://forum.xda-developers.com/showthread.php?p=57118648
------------
15.11.2014
- based on CroPol with some modifications from CoCafe (LiveOPP)
- added zzmoove governor,
- disabled usecase governor and screen off limiter,
- added LiveOPP from CoCafe with dynamic voltages
http://forum.xda-developers.com/showthread.php?p=56784470
--------------
Comes at Universal Aroma Installer (from Android-Andi's AnyKernel) which keeps the original ramdisk.
Expected to work with all ROMs
Very nice Thread! Was definitly missing here. Good job!
PA-kernel updated
PA-kernel 20140709
- removed ROW sheduler
- ZRAM improvements
http://goo.gl/56zx3H
Have fun!
Gesendet von meinem K1 mit Tapatalk
Hello, please can you add any kernels that have been made for stock roms for example fude kernel etc. Thanks
Sent from my GT-I8190N using XDA Premium 4 mobile app
2010radams said:
Hello, please can you add any kernels that have been made for stock roms for example fude kernel etc. Thanks
Sent from my GT-I8190N using XDA Premium 4 mobile app
Click to expand...
Click to collapse
But Fude kernel has it's own thread And besides, it's not a kernel from a ROM (like the title of this thread says ).
Very nice thread @grinder777. Although I use stock-based custom ROMs, this is gonna be as helpful for some people as this is for me
2010radams said:
Hello, please can you add any kernels that have been made for stock roms for example fude kernel etc. Thanks
Sent from my GT-I8190N using XDA Premium 4 mobile app
Click to expand...
Click to collapse
As written at OP, you are very welcome to help!
I don't have stock ROM no more, therefore I'm not able to test those kernels. If you have a link I will add, if you like to extract,
- take chacos kernel,
- extract it
- replace boot.img and
- replace system/lib/modules
- zip it again, uncompressed
- flash and test it
and it will be added soon!
Have fun!
Gesendet von meinem GT-i8190 mit Tapatalk 2
koragg97 said:
But Fude kernel has it's own thread And besides, it's not a kernel from a ROM (like the title of this thread says ).
Very nice thread @grinder777. Although I use stock-based custom ROMs, this is gonna be as helpful for some people as this is for me
Click to expand...
Click to collapse
Sorry, i never read the full title of the thread. On my phone the thread looks titled 'collection of kernels'. Its only when i click on it i see 'collection of kernels from diffrerent roms for s3 mini' . Silly me
Sent from my GT-I8190N using XDA Premium 4 mobile app
Hello,
I compile Omnirom with the optimizations JustArchi v3 and Linaro.
Thus if you want i have kernel 3.0.44, kernel 3.0.57 and kernel 3.0.101 compatible OmniRom Golden-guy and SlimKat Android-Andi
with
Optimization JustArchi v3
Compiled with Linaro 4.9.1
I/O Scheduler :
- noop
- deadline
- cfq
- sio
- Zen
- sio+ (only in kernel 3.0.101)
- row. (only in kernel 3.0.101)
Governor :
- Abyssplug
- Ondemand
- Powersave
- Performance
- SmartassV2
- Sakuractive
- InteractiveX
26/07/2014 - Kernel 3.0.44 --> http://d-h.st/7sE
10/08/2014 - Kernel 3.0.57 --> http://d-h.st/RwC
23/08/2014 - Kernel 3.0.101 --> http://d-h.st/uoI
Github --> https://github.com/Fred6681?tab=repositories
Fred6681 said:
Hello,
I compile Omnirom with the optimizations JustArchi v3 and Linaro.
Thus if you want i have kernel 3.0.44 compatible OmniRom Golden-guy 09/07/2014
with
Optimization JustArchi v3 compiled with Linaro 4.9.1
I/O Scheduler Added: SIO and Zen
Clock added: Smartass v2
Kernel --> http://d-h.st/AZt
Github --> https://github.com/Fred6681?tab=repositories
Click to expand...
Click to collapse
GREAT! I added the link to your post at OP so you can edit and keep up to date your post.
Thanks a lot!
Gesendet von meinem GT-i8190 mit Tapatalk 2
grinder777 said:
Anykernel by Android-Andi
Did not try myself yet. I'm not sure if it will work with f2fs but something BIG is growing here. Please report if you tried.
[ROM][4.4.4] SlimKat
http://forum.xda-developers.com/showthread.php?t=2758098
kernel is here
http://forum.xda-developers.com/showthread.php?p=53781894
and here
http://forum.xda-developers.com/showthread.php?p=53679550
Click to expand...
Click to collapse
Tested his Kernels on different ROMS (Vanir and AA´s Slim). Both Kernels (stable 3.0.31 and beta 3.0.44) work without issues. On Vanir for example they solve the well known bluetooth issues
KingGehl said:
Tested his Kernels on different ROMS (Vanir and AA´s Slim). Both Kernels (stable 3.0.31 and beta 3.0.44) work without issues. On Vanir for example they solve the well known bluetooth issues
Click to expand...
Click to collapse
Would you mind testing the PA-kernel at Vanir?
I'm still with Carbon...
Gesendet von meinem K1 mit Tapatalk
Fred6681 said:
Hello,
I compile Omnirom with the optimizations JustArchi v3 and Linaro.
Thus if you want i have kernel 3.0.44 compatible OmniRom Golden-guy 09/07/2014
with
Optimization JustArchi v3 compiled with Linaro 4.9.1
I/O Scheduler Added: SIO and Zen
Clock added: Smartass v2
Kernel --> http://d-h.st/unL
Github --> https://github.com/Fred6681?tab=repositories
Click to expand...
Click to collapse
I am at M&Ms Carbon with system, data & cache at f2fs...
So I don't expect your kernel to work here, but am not sure.
How is it about f2fs? Has it to be supported by the ROM or by the kernel or both?
Gesendet von meinem K1 mit Tapatalk

[Kernel][CM 13][SM-G901F] Lucifer Kernel [29/01/16]

Lucifer KERNEL​
This kernel is ONLY for SM-G901F CM 13​You will void your warranty after flashing this ROM (knox @ 0x1)​I'am not responsible of any damage caused to your device after flashing this KERNEL​
Features:
Code:
- Compiled with the UBER 6.0.x Toolchain
- 03 Opitimizations
- Upstream stable updates to 3.10.94
- LZ4 Compression
- CRC Disabled
- Kernel logger disabled
- Simple GPU Algorithm
- Adreno idler
- voltage control
- Fast charge
- Dynamic Fsync Control
- Intelli_Thermal
- KCAL
- PowerSuspend
- intelli_hotplug v5.1
- msm_hotplug
- AutoSMP
- Sioplus & tripndroid i/o schedulers
- Reduced WAKELOCKS
- NVIDIA enhance power efficiency patch
- GOVERNORS ( ondemand Plus - Interactive Pro - Conservativex - yankactive - barry_allen - Intelliactive - bioshock - alucard - zzmoove - Darkness - Umbrella_Core - Nightmare - Elementalx - Smartass V2 - LionHeart - Tripndroid )
DOWNLOAD:
Lucifer v1.0
Lucifer v2.0
Lucifer v3.0
Lucifer v4.0
Credits:
- Alcolawl
- Alucard_24
- arter97
- bbedward
- faux123
- flar2
- franciscofranco
- javilonas
- klozz
- mrg666
- neobuddy89
- savoca
- showp1984
- TripNRaVeR
- twistedumbrella
- ZaneZam
XDAevDB Information
Lucifer Kernel, Kernel for the Samsung Galaxy S 5 Plus ( SM-G901F )
Contributors
MEGAX91
Source
Version Information
Status: Stable
Current Stable Version:
Stable Release Date:
How to Flash:
1. Restart to recovery
2. Flash .zip file.
3. Restart to system
Changelog :
v4.0 :
- added frandom support
- Massive sound driver updates
v3.0 :
- Linux 3.10.95 update
- added cafactive governor ( version of interactive by CodeAurora )
- added zram support
- reduced wakelocks
- Updates and fixes for GPU
v2.0 :
- Fixed Vibration Issue
- added S2S/S2W
- added bricked_hotplug
- added nvidia power efficiency patches
- removed raccoon_city governor
- LED fading/blinking support
* use this script to control it *
- Implement kexec-hardboot
v1.0 :
- added o.c
- removed rem Sound/added sound control
- Fixed interactive governor
Beta 02 :
- added governors ( pegasus - impulse - intellimm - smartmax - racoon_city )
- removed autosmp/added mako_hotplug
- Scheduler patches
Thanks MEGAX91!
Will test it out as soon vibration works. I only use vibration on notification and calls.
testing (i hope to see an improvement in deep sleep!)
Will flash it as soon as vibration works. Thanks dude!
Envoyé de mon SM-G901F avec XDA Forums

			
				
The kernel's governors feels a bit slowed down from its stock counterparts
overlordofdoom1 said:
The kernel's governors feels a bit slowed down from its stock counterparts
Click to expand...
Click to collapse
what's your settings ?
* i suggest you using elementalx with intelli_hotplug *
MEGAX91 said:
what's your settings ?
* i suggest you using elementalx with intelli_hotplug *
Click to expand...
Click to collapse
yeah i tried it but it felt smoother with stock kernel and conservative governor, weird
overlordofdoom1 said:
yeah i tried it but it felt smoother with stock kernel and conservative governor, weird
Click to expand...
Click to collapse
Test the new version.
MEGAX91 said:
Test the new version.
Click to expand...
Click to collapse
Hi does vibration works in new version?
Envoyé de mon SM-G901F avec XDA Forums
audren49 said:
Hi does vibration works in new version?
Envoyé de mon SM-G901F avec XDA Forums
Click to expand...
Click to collapse
No.
MEGAX91 said:
Test the new version.
Click to expand...
Click to collapse
Yeah thanks elementalx is very smooth now
I saw on your github that you are just commiting things without any source (where you got it from) or who the author was. Credits have to be given for each commit. For example;
Update zram to Neobuddy's branch. Check out his githubpage (with a link) you understand?
Sent with my Nova powered SM-G901F
@Tkkg1994
Hi
all credits belong to people in the first post.
i got Zram commit from here :
https://github.com/neobuddy89/shamu/commits/marshmallow/drivers/block/zram?page=3
i got nvidia power efficiency patches from here : ( but i modified them to work with arm )
https://github.com/XileForce/Vindicator-S6-Unified/commit/df230500da807ae78e0a2123ed517f6a05ed9513
MEGAX91 said:
@Tkkg1994
Hi
all credits belong to people in the first post.
i got Zram commit from here :
https://github.com/neobuddy89/shamu/commits/marshmallow/drivers/block/zram?page=3
i got nvidia power efficiency patches from here : ( but i modified them to work with arm )
https://github.com/XileForce/Vindicator-S6-Unified/commit/df230500da807ae78e0a2123ed517f6a05ed9513
Click to expand...
Click to collapse
Well you don't have to publish that here. Instead you have to tell that on each commit. Do you know what I mean?
Sent with my Nova powered SM-G901F
@Tkkg1994
Ok , i got it.
先生ありがとうございました
----------------------------------------------------------------
i added some gestures like s2w/s2s/dt2w but i dont see gestures in kernel auditor! i think i need to compile my own K.A version
do you know any alternative app with gesture support ?

			
				
MEGAX91 said:
@Tkkg1994
Ok , i got it.
先生ありがとうございました
----------------------------------------------------------------
i added some gestures like s2w/s2s/dt2w but i dont see gestures in kernel auditor! i think i need to compile my own K.A version
do you know any alternative app with gesture support ?
Click to expand...
Click to collapse
You have to write your own app (stweaks or synapse). There you can add your own control things
Sent with my Nova powered SM-G901F
MEGAX91 said:
Click to expand...
Click to collapse
BTW there is a new update for cm13: build 2015/01/5 and thanks for the new kernel build, looks amazing

[KERNEL] [MM] [OMNI] [KCAL][OTG][MTP][F2FS] [31 AUG] stranostrano kernel ver. 2.2.4 - Discontinued

S=T=R=A=N=O=S=T=R=A=N=O
Kernel
31-august-2016 update to ver 2.2.4
An OMNI based kernel for OnePlus One (aka Bacon)
Based on OMNI source
Works on OMNI and OMNI based Marsh Mellow roms.
Reported it works on official OMNI nightly, Herna HomeBuild, SlimSaber, SAOSP and OmniSense
Probably works on all other Omni based rom MM builds. Try and report
An OMNI based kernel with working MTP, OTG, KCAL, Franco's SoundControl, Boeffla touchboost, Voltage Control and other feature​
Based on OMNI NIGHTLY kernel source with the addition of Savoca's Kcal, Franco's SoundControl, Boeffla's Touchboost, Voltage Control, Simple_gpu_algorithm and other features ported from their respective sources and reworked by me .
CPU Governors
Smartmax / Interactive / Conservative / Userspace / Powersave / Ondemand / Performance / Slim / Ondemandplus / Alucard / Zzmoove / Intellimm / HYPER
16 march - added Wheatley and Slim governors
19 march - added OndemandPlus governor
12 april - added Adaptive, Darkness and Nightmare governors
15 april - added Voltage Control
24 april - added Intelliactive, Intellidemand and Alucard governors
25 april - removed Conservative, Wheatley and Yankactive cpu governors
02 may - removed all unnecessary cpufreq governors - just added Alucard to defaults
07 may - added again Slim and OndemandPlus governors
11 may - Awake CPU schedule workqueue
24 june - added zzmoove governor - thanks to @ZaneZam
27 june - fix - enabled hotplug in zzmoove governor - thanks to @kodora that has reported malfunction
31 august - added HYPER and Intellimm cpu governors and applied update to source code
GPU Governors
Cpubw_hwmon / Msm_cpufreq / Msm-adreno-tz / Userspace / Powersave / Performance / Simple_ondemand
15 april - Added Simple_gpu_algorithm
17 april - removed cpubw_hwmon because it freeze OPO
02 may - Added Adreno Idler
11 may - GPU overclock to 657MHz and idle to 27MHz
I/O Scheduler
NOOP / DEADLINE / ROW / CFQ / BFQ / TEST-IOSCHED / SIO / TRIPNDROID 19 march - added SIOPLUS, FIOPS and ZEN
Hotplug
24 april - Added Alucard hotplug
02 may - Added MSM hotplug
27 june - Added "Bricked hotplug" - thanks to @show-p1984
Custom Features & Optimizations
28 July - switched to @francisco Franco thermal control
added Adaptive Low Memory Killer
Built with UBER 4.8
KCAL v2 Control - credits to @savoca
Vibrator Intensity interface
Franco's Sound Control - credits to @franciscofranco
Boeffla TouchBoost - credits to @Lord Boeffla
Voltage Control - credits to @faux123
Simple_gpu_algorithm - credits to @faux123
Alucard hotplug - credits to @alucard_24
MSM Hotplug - credits to @myfluxy
Adreno idler - credits to @arter97
Tuned and updated Powersuspend feature on 02 May release. - thanks to @faux123 and @Yank555
Fsync on/off toggle - credits to @franciscofranco
CRC Software - disabled by default and added toggle switch.
Schedule workqueues on awake CPU and added toggle switch.
FS - added F2FS support
DISCLAIMER: flash at your own risk; I've tested for hours and all gone right. My goal was to add KCAL and other missed features to the OMNI Rom Official kernel and share with you for improve our android experience.
Contributors
stranostrano
Source Code: github.com/stranostrano
Special thanks for their source goes to: OmniRom team, savoca, herna, fermasia, derromtester, osm0sis, Francisco Franco, Lord Boeffla, Faux123, Alucard_24, myfluxi, arter97, yank555, zanezam, show-p1984 and many others.
My very special thank goes to @DerRomtester that helped me at the beginning.
Created on 28/01/2016
Updated on 31/08/2016
Download
current version: Ver. 2.2.4 - 31 august release
OLD RELEASE:
Ver. 2.2.3 - 28 july release
Ver.2.2.2 - 18 july release
Ver.2.2.1 f2fs - 13 july release
Ver.2.2.1 - 27 june release
Ver.2.2 - 24 june release
Ver.2.1 - 11 may release
Ver.2.0 - 07 may release
Ver.1.8.0 - 02 May release - lags fixed
Ver.1.7.3 release - deprecated - there are lags
Ver.1.7.2 release - deprecated - there are lags
Ver.1.7.1 release
Ver.1.7 release
Ver.1.6 release
Ver.1.5 release
ver 1.4 release
ver 1.3 release
ver 1.2 release
ver 1.1 release
ver 1.0 release
extras:
Screen Control App by savoca
Flashing Instructions:
- Flash through recovery (PhilZ Touch 6.59.2 and TWRP recommended)
- Clean cache (recommended)
- Reboot
- Install Kernel Adiutor or Synapse (optional)
- Have fun ...always!
Changelogs:
Version 2.2.4 - 31 august release
- cpu governors - added HYPER (works really good) and IntelliMM governors
- updated source code to latest omnirom commits
Version 2.2.3 - 28 july release
- thermal: switched to Francisco Franco thermal control
- managed some code
Version 2.2.2 - 18 july release
- added Adaptive Low Memory Killer (toggle available)
- disable Config_pft for secure kernel
- other fix (see source code)
Version 2.2.1_f2fs - 13 July release
- added f2fs support
Version 2.2.1 - 27 June release
- fixed zzmoove cpufreq governor - thanks to @ZaneZam
- Added "Bricked hotplug" and fixed some error
Version 2.2 - 24 June release
[/B]- Added zzmoove cpufreq governor - thanks to @ZaneZam
- fixed some bugs and security issue. (see commits @source )
Version 2.1 - 11 May release
- GPU overclock to 657MHz and idle to 27MHz;
- Disabled software CRC at boot and introduced a toggle switch;- Introduced toggled schedule workqueues on awake CPUs to save power;
- USB: cdc-acm - more sanity checking;
- Various optimization to source code.
Version 2.0 - 07 May release
- cpufreq - added OndemandPlus and Slim governor;
- Fsync on/off toggle.
Version 1.8.0 - 02 May release
- Reworked from a clean code to fix lags;
- Removed a lot of unnecessary cpu governors - now just the Omni defaults plus Alucard;
- Updated Alucard hotplug;
- Added MSM Hotplug;
- Cleaned Simple Gpu Algorithm and added Adreno Idler;
- Updated Powersuspend feature;
- Enabled some TCP congestion algorithm;
- Tuned a lot of code (my fault);
Version 1.7.3
- added again Powersuspend feature.
- removed Conservative, Yankactive and Wheatley cpu governors
Version 1.7.2
- Moved get_cpu_idle_time() to cpufreq.c to align Omni source to current standard;
- Updated and adapted to "get_cpu_idle_time()" change, all cpu governors;- Added Alucard hotplug and Alucard, Intelliactive and Intellidemand Cpu Governors;
- Added Powersuspend feature;
- Updated some code in sourceVersion 1.7.1
- Removed "cpubw_hwmon" from GPU governors because it freeze OPO
Version 1.7
- Added GPU Simple_gpu_Algorithm and Voltage Control
Version 1.6
- Added Adaptive, Darkness and Nightmare cpufreq governors
Version 1.5
- Added OndemandPlus cpufreq
- Added SIOPLUS, FIOPS and ZEN I/O scheduler
Version 1.4
- Rebased on OMNI official Source
- Added SLIM and WHEATLEY cpufreq
- Reworked KCAL feature keeping KCAL within its own source file removing unnecessary mdss_mdp_kcal_ctrl.h
Version 1.3
- Added Boeffla's TOUCHBOOST
- Added SIO and TRIPNDROID I/O Scheduler
Version 1.2:
- Added Franco's SOUNDCONTROL
- Added YANKACTIVE governor
Version 1.1:
- Fixed some bugs
Version 1:
- Added @savoca KCal
Hi, it sounds good, but where is the download link?
@stranostrano
Why didn't you base on official nightlies source?
Sent from my A0001 using Tapatalk
photobix said:
Hi, it sounds good, but where is the download link?
Click to expand...
Click to collapse
in the second post I think you are too fast and didn't give my time to edit the post :laugh:
Renosh said:
@stranostrano
Why didn't you base on official nightlies source?
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
my choice
Works on SAOSP. Will test for a couple days and report back.
Sent from my A0001 using XDA Labs
stranostrano said:
in the second post I think you are too fast and didn't give my time to edit the post :laugh:
Click to expand...
Click to collapse
Yes, found the link
It's booting with the official nightly, will test the kernel, thank you!
I tried the kernel and loved it ,Can I use the kernel in my ROM , OmniSense ? Only if you don't mind , also , all credits for the kernel will obviously go to you .
Manav Bhagia said:
I tried the kernel and loved it ,Can I use the kernel in my ROM , OmniSense ? Only if you don't mind , also , all credits for the kernel will obviously go to you .
Click to expand...
Click to collapse
Sure that you can.
Just insert a link to this tread on your thread op and don't forget to thanks all other devs.
I'm recompiling kernel to set "Smartmax" governor as default instead of "Interactive". I've noticed some UI lags with "Interactive" that seem solved switching to others except "ondemand".
Please, if you have lags UI, try to switch to other governor and report back.
Just for info: Version 1.1 is online
It's so good to see new OMNI kernel !!! You are a hero.
Any info on hotplugs ? Zen? Bricked ? Cannot test ATM.
FunkyRasta said:
It's so good to see new OMNI kernel !!! You are a hero.
Any info on hotplugs ? Zen? Bricked ? Cannot test ATM.
Click to expand...
Click to collapse
Hi funkyrasta,
Avaulable cpu Governor are in the op description.
To guys that are running my kernel. Please report how it works.
Thank you
stranostrano said:
To guys that are running my kernel. Please report how it works.
Thank you
Click to expand...
Click to collapse
It's been running good seems just as stable as stock kernel. Battery life is about the same as well which has been excellent for me.
Sent from my A0001 using XDA Labs
tekanina said:
It's been running good seems just as stable as stock kernel. Battery life is about the same as well which has been excellent for me.
Sent from my A0001 using XDA Labs
Click to expand...
Click to collapse
Hi mate and thank you for sharing your opinion.
Anyway, did you using kcal feature?
If you do, have noticed anomalous battery drain using it?
please report.
stranostrano said:
Hi mate and thank you for sharing your opinion.
Anyway, did you using kcal feature?
If you do, have noticed anomalous battery drain using it?
please report.
Click to expand...
Click to collapse
No I haven't used kcal. I just installed Color Control, I will try it out and see how it goes. Will report back.
Sent from my A0001 using XDA Labs
Tekanina, the color control from savoca is the app to set up the kcal kernel based feature. If you're using color control, then you have Kcal working.
What I want to kniw is if you notice anomalous battery drain compared to stock kernel.

Categories

Resources