[PhilZ][Recovery][v6.59.0][Star Pro|Plus][GT-S7262] - Samsung Galaxy Star

Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD Cards, thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about this guide before following it!
* YOU are choosing to make these modifications.
This is PhilZ-recovery using cm-11.0 source
Changelog: Beta v1
1) Initial release of PhilZ-recovery
3) Has all features and fixes
Installation
1.)Turn on usb debugging in developer option.
2.)Power off your device, press and hold Volume Down + Home + Power buttons at the same time until you see a Warning with a Yellow Triangle.
3.)Now press Volume Up button. Your phone now is in ODIN MODE (Download Mode).
4.)Open Odin on PC.
5.)UNTICK everything
6.)Connect Phone to PC using USB Cable.(You will see added message on Odin)
7.)On Odin click on PDA(till version 3.07) OR click on AP(after version 3.09)
8.)Select the recovery.tar.md5
9.)Press on start.
10.)Remove battery quickly after Odin says pass before it boots up.
11.)Insert battery again. Press Power + Volume Up + Home button, and hold till you see the Samsung logo.
12.)If you see a Red Exclamation on the Top Left Corner of the screen, then you have installed CWM-recovery properly, and it will open up.
It is in .zip format so first extract it ... then you will get tar.md5
How to change recovery background image:
1. Make folder custom_res here external sd card /clockworkmod/custom_res
2. Copy any image ( .png is required )
3. Reboot to philz recovery
4. Go to recovery settings
5. Go to GUI Preferences
6. Go to Change background
7. Select Image from /storage/sdcard1
8. Choose your image file with .png
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to use AROMA file manager:
1. Download aromafm.zip from attachments
2. Copy it to your external sdcard here /clockworkmod/aromafm/aromafm.zip
3. Reboot to philz recovery
4. Go to Advanced Functions
5. Select Aroma File Manager
FAQ
Ques.I am not able to boot into system or my phone is stuck at Samsung (Bootsplash)
Ans.
(1)Go back to recovery and wipe data, wipe cache, wipe dalvik
(2)Flash stock rom and
(3)Then again flash my recovery
Hence:- problem solved
Download
1. Recovery- https://www.androidfilehost.com/?fid=24369303960688581
2. Odin - https://drive.google.com/file/d/0BwfVH-QIZQCjWXRaNnVSN3NFZTQ/view?usp=sharing
Source :- https://github.com/Fire-Galaxy
-----------------------------------------------------------------------
Contributor & highly worked on CM-11 branch
@FireLord
Credits
@Phil3759
If i forgot to mention any one in credits please pm @deniljoseph dont spoil the thread

Nice work buddy
Sent from my GT-S7262 using XDA Free mobile app

dude....Nice work!

looks cool Aman......Great Work..!!1

deniljoseph said:
Nice work buddy
Sent from my GT-S7262 using XDA Free mobile app
Click to expand...
Click to collapse
thank you

jithinjmj777 said:
dude....Nice work!
Click to expand...
Click to collapse
thank you

Rahul Rao said:
looks cool Aman......Great Work..!!1
Click to expand...
Click to collapse
Thank you

FireLord said:
Thank you
Click to expand...
Click to collapse
Aman.......loved with ur Philz Recovery bcoz multi option such as GUI Preference,..etc and background changeable...of Recovery:good:

Rahul Rao said:
Aman.......loved with ur Philz Recovery bcoz multi option such as GUI Preference,..etc and background changeable...of Recovery:good:
Click to expand...
Click to collapse
Once again thank you buddy
Sent from my MotoG3 using Tapatalk

thanks nice works

Related

[Boot Animation] DukeOS Bootanimation (Duke Nukem Forever) (CWM)

the original was done for the Galaxy Tab by Flokey and can be found here. i've tweaked it a tad and made the .zip much smaller.
Preview:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
it's not an exact replica of what you'll see on your phone, but it's pretty close. check out the youtube vid in the above link to see it "live".
Download:
DukeOS-bootanimationLOW-cwm.zip (1.9M)
INSTALLATION (for those who need it):
copy the file to your phone (i use sshdroid to copy it to my /mnt/sdcard/)
run System Recovery and choose Recovery Mode (make sure power is plugged in)
wait... (could it boot up past the Motorola logo any slower?)
select Install zip from SDCARD
select choose zip from internal sdcard (or just sdcard, your mileage may vary)
scroll down until you find the DukeOS-bootanimationLOW-cwm.zip file
hit your power button to select it
scroll down to Yes - Install DukeOS-bootanimationLOW-cwm.zip and hit your power button to select it.
watch the quick install screen
scroll down to Go Back and hit the power button again.
Reboot system now should be highlighted, hit the power button to reboot.
ENJOY!
===================================================================
as always, YOU are responsible for your phone, no matter how much i suck @ this.
===================================================================
Changes:
Thx !! Very cool !!
very nice!
please send other links. your link is not working. thx in adnvance.
itsonlym3 said:
the original was done for the Galaxy Tab by Flokey and can be found here. i've tweaked it a tad and made the .zip much smaller.
Preview:
it's not an exact replica of what you'll see on your phone, but it's pretty close. check out the youtube vid in the above link to see it "live".
Download:
DukeOS-bootanimationLOW-cwm.zip (1.9M)
INSTALLATION (for those who need it):
copy the file to your phone (i use sshdroid to copy it to my /mnt/sdcard/)
run System Recovery and choose Recovery Mode (make sure power is plugged in)
wait... (could it boot up past the Motorola logo any slower?)
select Install zip from SDCARD
select choose zip from internal sdcard (or just sdcard, your mileage may vary)
scroll down until you find the DukeOS-bootanimationLOW-cwm.zip file
hit your power button to select it
scroll down to Yes - Install DukeOS-bootanimationLOW-cwm.zip and hit your power button to select it.
watch the quick install screen
scroll down to Go Back and hit the power button again.
Reboot system now should be highlighted, hit the power button to reboot.
ENJOY!
===================================================================
as always, YOU are responsible for your phone, no matter how much i suck @ this.
===================================================================
Changes:
Click to expand...
Click to collapse
please send other links. your link is not working. thx
vladzmir said:
please send other links. your link is not working. thx
Click to expand...
Click to collapse
i'll see if i still have it this evening when i get home.
thanks for the interest.
can it be used for all roms?
sanaldi said:
can it be used for all roms?
Click to expand...
Click to collapse
Froyo and GB were released and available for Atrix 4G users in 2011. Users were using this boot animation back then. Its 2013, and we have Froyo, GB, ICS, and JB. Switching boot animations is done on ALL versions and ANY ROM.
cool..... i reboot my phone a bit more lately
link is busted

[RECOVERY][CWM] Official 6.0.3.3

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
By flashing this recovery you take full responsibility to whatever happens on your device. The developer will NOT be held responsible to whatever happens on your device. Of course, the recovery has been tested but whatever happens on your device will not be held against the developer.
​What Is CWM Recovery ?
CWM recovery is a way that enables you to flash a custom rom , customize your rom and can save you from bad situations. To Be fully in control of your android device you need a recovery and this is one of them.​
There are a few methods for installing CWM
1- ADB METHOD
You need root before you continue.
Now copy recovery.img from second post to your sd card
Make shure that device is on usb debugging mode.
Plug device and open Terminal/command prompt.
Copy Pasta the Following Commands :
PHP:
adb shell
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p6
make shure that partion is mmcblk0p6 or you will brick device !
now you can reboot to recovery (volume up + home +power) and enjoy CWM 6.0.3.3​
2- ON PHONE TERMINAL METHOD
First Download Terminal Emulator From Play Store.
Plug device and open Terminal apk
Right the Following Commands :
PHP:
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p6
make shure that partion is mmcblk0p6 or you will brick device !(guys with fat fingers stay away !)
now you can reboot to recovery (volume up + home +power) and enjoy CWM 6.0.3.3​
​3- ODIN METHOD
Download odin and the .tar file Samer has provided
Open odin and click "PDA" and select the downloaded .tar file
finally make sure that only autoreboot and F.Reset Time is checked
then press start!​
4- FLASHABLE ZIP METHOD
Download odin and the .tar file Samer has provided
Download the .zip file from post 2
Enter recovery
select install zip
choose the downloded .zip file
Done! ​
CM Team For CWM recovery .
@ricky310711 @Dees_Troy @bigbiff @anders3408 @cybojenix @S.a.M.e.R_d{These Guys Are The Best And I Thank Them for helping me every step of the way and not thinking that i am a nut job }​​
Please Hit The Thanks Button If You Like My Work
Follow Me On Twitter SamerDKingCobra
If You Have Any Kind Of Trouble Feel Free To PM Me As I Am Here Almost 19 Hours A Day.​
Downloads :
1.recovery.img Build #1 {For dd Method }MEGA mirror.
2.CWM-recovery-6.0.3.3-i9300 Build #1 {For Odin} MEGA mirror
3.CWM-I9300-Recovery.Zip {Flashable in old Recovery} MEGA mirror​Change Log :
Build #1 Fully Working.​Whats To Do In Future Build ?
Enable Touch .
Add OTG Support.​FAQ:{Please Read Before Posting}
Q: OMG ! Recovey Not Booting What To Do ?
Alease Dont try entering recovery first time from advanced power menu just do it the hard way
Q:My Device is not getting read by windows ?
A:Uninstall all drivers that you installed for the device .​​​Please Hit The Thanks Button If You Like My Work
Follow Me On Twitter SamerDKingCobra
If You Have Any Kind Of Trouble Feel Free To PM Me As I Am Here Almost 19 Hours A Day.​
Any one test ?
Sent from my GT-I9500 using xda premium
S.a.M.e.R_d said:
Any one test ?
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
about 70 downloads, atleast 1 person would have tested!
talk on Facebook bro
So far it works just fine. I like the somewhat smaller font size.
:good:
Found a typo in "what is CWM "
The word "flash" you wrote "falsh "
And combine the words forward and afterward I think it's "flash "
Sent from my GT-I9300 using xda premium
qtwrk said:
Found a typo in "what is CWM "
The word "flash" you wrote "falsh "
And combine the words forward and afterward I think it's "flash "
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
will fix it now

[UPDATE][RECOVERY]CWM 6.0.5.1 [Latest/Compiled from CM 11 M11 Source]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CWM RECOVERY 6.0.5.1 FOR A116​
SYNC TO LATEST CM SOURCE
CONFIGURED TO CMUPDATER​
REQUIREMENTS:-
FOR PC => Sp Flash Tool
FOR MOBILE => Root and MOBILE UNCLE TOOLS APP
BUGS:-REPORT IF ANY
DOWNLOADS-
CWM.6.0.5.1.img
CWM.6.0.5.0.img
HOW TO INSTALL:-
MOBILE
Download the recovery.img and Put it in root of your SDCARD
Open Mobile uncle tools app and select Recovery Update
When prompt select Yes and then again yes to reboot into recovery to check it is working or not.
Done
PC
Install USB drivers for your phone using Micromax drivers or if already installed then OK.
Extract the Stock ROM folder and replace recovery.img with cwm recovery which you downloaded from here.
Open the SP Flash Tools.
In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device select mt6589 scatter file.txt
Check only recovery.img, preloader and uncheck all others
Switch off your phone (Remove the battery)
In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
Click the Download option (present on the right of Firmware>Upgrade option) and the flash tool will start looking for your phone.
Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
After the process completes, a green ring will appear on your device signalling that the process was successful.
Disconnect and reboot or go to recovery to check it.
Kernel Used:-Kash Kernel Stable
CREDITS:-
koushik Dutta FOR HIS CLOCKWORK-MOD RECOVERY.
@chrmhoffmann for compiling.
@kashifmin For his kernel & Support.
​
Reserved
Cool bro
Just replaced with my current recovery
It works flawless
+1 buddy
Great work thank you for this
harold1603 said:
Great work thank you for this
Click to expand...
Click to collapse
Andromind said:
Cool bro
Just replaced with my current recovery
It works flawless
+1 buddy
Click to expand...
Click to collapse
Thanks for appreciating my work.
Ok Flashed this and so far its good...
Doing a backup with it....
This is a non-touch based recovery (correct me if i am wrong) .... i know what i'm about to ask is difficult, BUT CAN you port CWM touch recovery ??
Thanks
Greg
Does this recovery has touch controls like PhilZ Touch?
Viggen66 said:
Does this recovery has touch controls like PhilZ Touch?
Click to expand...
Click to collapse
No touch controls...
just now flashd .. luking coooollll ...:good:
nice one
please provide the flashable zip mobiuncle tools cant find the recovery in sdcard as well as in phone memory..
zeu55 said:
please provide the flashable zip mobiuncle tools cant find the recovery in sdcard as well as in phone memory..
Click to expand...
Click to collapse
rename to recovery.img and try
update: cwm 6.0.5.1
sync to latest cm source
configured to cmupdater​

[RECOVERY][G900H] TWRP Recovery v3.0.0-0 [2016-03-14]

[RECOVERY] [3/14/16] TWRP 3.0.0-0 - TeamWin Recovery Project
[N]ation Team is proud to present TWRP 3.0.0-0 for the Samsung Galaxy S5 Exynos!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction:
Team Win Recovery Project, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch driven user interface , no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Key Features:
Touchscreen driven with real buttons and drag-to-scroll
XML-based GUI that allows full customization of the layout true theming!
Settings are saved to the sdcard and persist through reboots
Ability to choose which partitions to back up and which to restore
Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
Onscreen keyboard
Decryption of /data
Easy selection of internal/external storage
See changelog below for new features
In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe cache & dalvik, and run a backup.
Dark Stock Themes:
http://forum.xda-developers.com/android/themes/theme-twrp-3-0-0-0-dark-stock-colors-t3310235
Known Issues:
- You tell me
Source Code:
https://github.com/Fevax/android_device_k3gxx
https://github.com/TeamWin
Download:
HERE
If you are happy with my work, please:
​
Reserved #1
Reserved #2
So, I have a question. For the theme, Which one should I choose? Marshmallow portrait v2?
willysusilo said:
So, I have a question. For the theme, Which one should I choose? Marshmallow portrait v2?
Click to expand...
Click to collapse
yeap
Yeah, this recovery works flawlessly. No problem so far. If I found any bug I will report it
Theme works fine
Wow you just a great Dev
I am proud to use G900H with you thanks will try tomorrow. [emoji4]
U r awesome
Thank u @Fevax u r best dev for 900h
plz fix cm13 bugs thank <3 :fingers-crossed:
I installed it, so far so good, keep up the good work. ?
Sent from my SM-G900H
So nice work... But i backup old rom since install this recovery old backup not view to restore...i see to file manager this recovery change id for backup recovery
Can someone give the step by step to install this Recovery please?
Sheeng12 said:
Can someone give the step by step to install this Recovery please?
Click to expand...
Click to collapse
1-Download recovery file
2-connect phone(download mode), to pc
3-on pc open odin and flash the recovery file
4-reboot and enjoy
Thank
Ariyan.n said:
1-Download recovery file
2-connect phone(download mode), to pc
3-on pc open odin and flash the recovery file
4-reboot and enjoy
Click to expand...
Click to collapse
Already installed it and is working fine no issues thank ?
Could i use flashify to this?
somadsul said:
Could i use flashify to this?
Click to expand...
Click to collapse
Yes, you can. Because I used Flashify to install this recovery!
willysusilo said:
Yes, you can. Because I used Flashify to install this recovery!
Click to expand...
Click to collapse
Ok thanks
As usual @Fevax Done great job, I wish u to make it official.
somadsul said:
Ok thanks
Click to expand...
Click to collapse
How you flashed? Recovery is in tar.md5 format, flashify not recognised it.
Sent from my SM-G900H using Tapatalk
somadsul said:
How you flashed? Recovery is in tar.md5 format, flashify not recognised it.
Sent from my SM-G900H using Tapatalk
Click to expand...
Click to collapse
So,before I flash it with Flashify I did these steps
1. Rename .tar.md5 to .tar
2. Extraxt .tar archive
3. You will get recovery.img to be flashed with Flashify
so beautiful,thx bro...

[RECOVERY][UNOFFICIAL][TWRP-3.2.1] Samsung Galaxy J5[MM][LL][SM-J500H/F/FN/G/M/Y]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP Recovery for Samsung Galaxy J5.
DISCLAIMER:
Code:
Your warranty is now void.
I'm not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired, because the alarm app failed. Please
do some research if you have any concerns about features included
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
INSTRUCTIONS:
1.Download and install Odin,usb drivers.
2.Power off the device and boot into download mode by holding [VOLUME DOWN/HOME & POWER].
3.A Warning screen appears,now press volume up once and connect the phone to the PC.
4.Open Odin with admin rights and you should see the phone added at some ID COM: port if not then you have to download and install the appropriate drivers.
5.Now click on AP and select the downloaded recovery file.
6.Hit start and the flashing will be done in a few seconds and the device reboots.
7.Hold VOLUME UP+POWER+HOME buttons to boot into recovery.
Enjoy!!
Download(3.1.2)​J500F/M/G/Y
J500FN
J500H​
NOTE : For some reasons twrp gets replaced back with the stock recovery if we left the device to reboot into system after flashing. To overcome this issue untick the Auto Reboot from the options in Odin and flash the recovery by following the above steps. Now right after flashing is done,power off the device and power it on by holding [ VOLUME UP+HOME+POWER] to enter into the recovery and 'swipe to allow modifications'.
Be careful while backing up and playing around with efs partition,you might loose your IMEI.!!
XDA:DevDB Information
[RECOVERY][UNOFFICIAL][TWRP-3.2.1] Samsung Galaxy J5[MM][LL][SM-J500H/F/FN/G/M/Y], ROM for the Samsung Galaxy J5
Contributors
Dyneteve, vince2678
Source Code: https://github.com/galaxy-msm8916
ROM OS Version: 8.x Oreo
Version Information
Status: Stable
Created 2018-03-27
Last Updated 2018-03-27
thanks bro
Sent from my SM-J500M using XDA Labs
Can I flash it from any flashing app??
amritansh singh gautam said:
Can I flash it from any flashing app??
Click to expand...
Click to collapse
only by odin is a .tar file bro
joseulyces said:
only by odin is a .tar file bro
Click to expand...
Click to collapse
You coud always extract the tar file with a app from playstore and flash the img with flashfire or your current twrp
Dyneteve said:
You coud always extract the tar file with a app from playstore and flash the img with flashfire or your current twrp
Click to expand...
Click to collapse
Dyneteve said:
You coud always extract the tar file with a app from playstore and flash the img with flashfire or your current twrp
Click to expand...
Click to collapse
OK thanks bro
2 files are there for j500f which one to use
amritansh singh gautam said:
2 files are there for j500f which one to use
Click to expand...
Click to collapse
Witch one to use..uhm....like latest one?
amritansh singh gautam said:
2 files are there for j500f which one to use
Click to expand...
Click to collapse
if the most recent
Ok, i've updated twrp added option to backup modem + firmware parition and some fixes
Dyneteve said:
Ok, i've updated twrp added option to backup modem + firmware parition and some fixes
Click to expand...
Click to collapse
Great :good:
Do you have this file in zip or img (not sure what the right extension) to install via TWRP?
Aepo said:
Do you have this file in zip or img (not sure what the right extension) to install via TWRP?
Click to expand...
Click to collapse
The TWRP download has the extension .tar (this extension you install via ODIN), and if you extract the .tar file on the pc or on the mobile phone itself, you will see an .IMG file that can be installed by your current recovery.
Tyranodasroms said:
The TWRP download has the extension .tar (this extension you install via ODIN), and if you extract the .tar file on the pc or on the mobile phone itself, you will see an .IMG file that can be installed by your current recovery.
Click to expand...
Click to collapse
Thank you so much, my friend, it saved my day. My notebook has problems, and now I can always test this version whenever I want using my own cell phone, anyway.
Shezo
I have been using GBwhatsapp v6.10 and it prompted me to update to v6.25. My challenge is i have installed GBwhatsapp v6.25 but i can not recover my old chats from v6.10
Be careful while backing up and playing around with efs partition,you might loose your IMEI.!!
if it's happened how recover this please ? i wipe efs and now i reflash again the ROM to fix it, it's right ?
viietkoz said:
Be careful while backing up and playing around with efs partition,you might loose your IMEI.!!
if it's happened how recover this please ? i wipe efs and now i reflash again the ROM to fix it, it's right ?
Click to expand...
Click to collapse
Don't think that is going to work, unless you have a twrp backup somewhere that included the efs partition. Are you sure you do not have an efs backup somewhere you can restore?
Is AROMA support present?
why does not the sd read me? with the twrp 3.2.1?

Categories

Resources