SDXC support for CM 11? - RAZR HD Accessories

I unlocked my bootloader and installed CM 11 from this thread http://forum.xda-developers.com/showthread.php?t=2518701 just for use my 64 gigs sdcard but the phone can't detect it. I had a Droid 4 that worked wonders with the same card and ROM. Any insights?

One insight: Don't post the same thing in multiple threads.

Sorry

Related

SDHC rom for 6828

Just like to ask what rom can work with a sdhc pach or is this already built in in the rom? sorry a bit new in this thread
i am using 4gb SDHC kingston class 4 with nhocbanme´s WM6.1 clean rom without any problems
character said:
Just like to ask what rom can work with a sdhc pach or is this already built in in the rom? sorry a bit new in this thread
Click to expand...
Click to collapse
You can try Helloworld's Clean ROM, 8G SDHC has been reported to work well.
http://forum.xda-developers.com/showthread.php?t=360664
K
Thanks so much
Thanks so much...
so the sdhc support is not a rumor anymore
hopefully I can contribute to this forum as well
character said:
Just like to ask what rom can work with a sdhc pach or is this already built in in the rom? sorry a bit new in this thread
Click to expand...
Click to collapse
Someone reporting that M$ already include the driver for SDHC in WM 6.1, so you don't need to install the driver. But SDHC can not use for upgrade ROM by mini SD Methode, you must use standard mini SD under 2 GB.

[Q] MIUI+PerfectPesov1.7a on MultiROM + WP7 themes port

Hey guys!
I recently checked these forums and saw the amount of MIUI vibes going on.
I am going to try either Fundooz's or MasterShefis' MIUI ROM on my Optimus One, but I have two questions.
Will either of them run off sdcard using MultiROM while PerfectPesov1.7a is on internal? I have a 4GB SDcard in my O1 and I already have a 1gb partition from previous MultiROM use. I've removed MultiROM since, but I'd put it back on if I can get MIUI to boot off SD!
Also, are there any MDPI WP7 MIUI themes? I've seen abaolutely stunning ones, and if I get MIUI, I want one!
I'll sneak in a third question, is there TellMe (wp7 voice commands) for MIUI or CM7 roms or Android in General? Surely someone can replicate it if anyone wants to work together to try, that works
CJ
Please help me get an unlocked Windows Phone 7 device D;
Bump
Please help me get an unlocked Windows Phone 7 device D;

Sony Tablet P - microSD 64GB card working!

I've read in a thread concerning the Tablet S that 64GB SDXC cards were working in it.
I can now confirm that the Sandisk Ultra microSDXC UHS-1 (class10) card is working with the Tablet P (ICS 4.0.3 rooted). I think it came formated in extFAT and wasn't recognized. I reformated it within my Xperia Arc S (didn't try with the tablet, not sure if there was an option for it) and there it is!
Vuche said:
I've read in a thread concerning the Tablet S that 64GB SDXC cards were working in it.
I can now confirm that the Sandisk Ultra microSDXC UHS-1 (class10) card is working with the Tablet P (ICS 4.0.3 rooted). I think it came formated in extFAT and wasn't recognized. I reformated it within my Xperia Arc S (didn't try with the tablet, not sure if there was an option for it) and there it is!
Click to expand...
Click to collapse
How did you get ICS for Tablet P? Do you have an international version? If not could you please provide details or open a thread on installing ICS on Tablet P?
Thanks,
Todd Thompson
Sorry for the late answer. ICS for the Tablet P has been around for quite a while now, and it's the official one. I have the standard unlocked european model.
Maybe you have a locked version of the tablet and your provider did not update it. Did you try with the Sony PC compagnon software? I think I used this to find out there was an update, on the tablet itself the software update did not show me anything.
Keep in mind that if you want to root it, you should use the 4in1 or all-in-one tool, not sure about the name (search the Sony Tablet forum for it) , BEFORE updating your tablet!
It's a great tool and you can use it for backing up your old/new firmware and activate a few options on the tab'.
Enjoy!

Need help upgrading my Software Kindle Fire HDX 7 Inch with Cyanogenmod 11 Safestrap4

Hello dear Community,
i really hope you can help me along. First of all pardon my english... i have not used it for a decade so it is really "rusty"
I bought a Kindle Fire HDX 7 Inch (the Version with Front Facing Camera) second hand. It came with Cyanogenmod 11 and Safestrap on it installed by the previous owner.
Now i figured out that there are CM 12 and CM 13 Versions availuable for this device (thor should be its pseudonym)...
I don't want to brick my device and i have no idea where to really start....
First of all i always read about unlocked bootloaders... if i am correct my tablet at the moment does not have an unlocked bootloader just a sort of "bypass" so that the older Cyanogenmod 11 works? Is that correct?
If so how can i unlock it properly... i already tried the 1 Click unlock method posted in this forum using VirtualBox etc.... which failed with an error code and did not seem to work out well.
What else do i have to do in order to successfully install Cyanogenmod 13 nightlys? Is Safestrap as sort of a recovery based on an older TWRP Version (2.7x is suppose) a proper recovery for installing a rom? Or do i need to change the recovery? What about the rom slot management options in Safestrap i found!?
I hope somebody might help me out with this (i am not totally new to flashing roms) but i just want to be sure to make it in the right way and order... (cyanogenmod wiki is not speaking a word about unlocking the bootloader in terms of how to do it properly).
Lots of Questionmarks over my head.... *sigh*
I hope someone can help me sort this out.
Best regards
Daedra666 said:
Hello dear Community,
i really hope you can help me along. First of all pardon my english... i have not used it for a decade so it is really "rusty"
I bought a Kindle Fire HDX 7 Inch (the Version with Front Facing Camera) second hand. It came with Cyanogenmod 11 and Safestrap on it installed by the previous owner.
Now i figured out that there are CM 12 and CM 13 Versions availuable for this device (thor should be its pseudonym)...
I don't want to brick my device and i have no idea where to really start....
First of all i always read about unlocked bootloaders... if i am correct my tablet at the moment does not have an unlocked bootloader just a sort of "bypass" so that the older Cyanogenmod 11 works? Is that correct?
If so how can i unlock it properly... i already tried the 1 Click unlock method posted in this forum using VirtualBox etc.... which failed with an error code and did not seem to work out well.
What else do i have to do in order to successfully install Cyanogenmod 13 nightlys? Is Safestrap as sort of a recovery based on an older TWRP Version (2.7x is suppose) a proper recovery for installing a rom? Or do i need to change the recovery? What about the rom slot management options in Safestrap i found!?
I hope somebody might help me out with this (i am not totally new to flashing roms) but i just want to be sure to make it in the right way and order... (cyanogenmod wiki is not speaking a word about unlocking the bootloader in terms of how to do it properly).
Lots of Questionmarks over my head.... *sigh*
I hope someone can help me sort this out.
Best regards
Click to expand...
Click to collapse
Quick responses (btw - your english is fine!):
- Safestrap is not a generic recovery and can not be used to flash roms other than those designated as "Safestrap Compatible"
- Unlocking the bootloader is the best (really only) path to newer ROMs including CM 12.1 and CM 13; links to relevant threads below
- If you opt to stick with Safestrap v4 do NOT create or use secondary slots; everything happens in the STOCK slot
Everything you need to know about unlocking the bootloader can be found in these two threads. Read the thread OP (important) and then focus on posts made during the past 30 days. Good luck!
http://forum.xda-developers.com/kindle-fire-hdx/general/thor-unlocking-bootloader-firmware-t3463982
http://forum.xda-developers.com/kindle-fire-hdx/general/multi-platform-1-click-bootloader-t3241014

256GB NTFS not readable from LineageOS Galaxy S8

Is it a bug or my mistake?
I'm looking help with a trouble with my micro SD card.
Until few days ago a was using a Samsung Galaxy S5 with a 256GB microSD with NTFS as FileSystem.
(I've to use NTFS because my Synology does not work with exFat o with standard ext4 and, of course, because fat32 does not support 4GB+ files)
My GalaxyS5 screen get some trouble so I moved to a GalaxyS8 with LineageOS (https://www.xda-developers.com/unofficial-lineageos-17-1-android-10-samsung-galaxy-s8-plus-note-8/)
The problem is that I can not use the microSD on these phone.
I tested with a 64GB NTFS microSD and works.
I tested with a 256GB exFAT microSD and works.
There is no way to use with the 256GB NTFS microSD.
Why ?
Any fix ?
Thank you very much!
aid85 said:
Is it a bug or my mistake?
I'm looking help with a trouble with my micro SD card.
Until few days ago a was using a Samsung Galaxy S5 with
...
Any fix ?
Thank you very much!
Click to expand...
Click to collapse
Hi,
Questions about ROMs are often very specific (and this one is), so make sure to ask in the ROM's thread first : https://forum.xda-developers.com/galaxy-note-8/development/rom-lineageos-17-1-t4041979
Only Samsung devices with Stock ROM support NTFS

Categories

Resources