Okay I have seen various requests so I decided to hook it up, I had to pay for these but here ya go. I have full firmware for lollipop or kitakat and you can get them from the following links to my google drive.
https://drive.google.com/folderview?id=0BxcLJPerShJ_ZDJrNV9fRVBSdU0&usp=sharing
Within you will see two folders you can pick either kitkat or lollipop and to do a full flash download the files starting with ALL then flash with odin by placing in the pda section. The others shouldnt even be needed if your looking just to fully flash the device use the ones that start with the label ALL. Enjoy. Wish someone could get the bootloader unlocked for this variant. If their are any other variants that need firmware let me know ill see what i can do.
I am curious could i perhaps flash the csc for tmobile then maybe my dev settings let me unlock bootloader like tmobile variant? I am not certain but I feel like it could possibly
Any luck with that ? ? I bought this phone on Valentines Day with android 5.1.1. The first thing I did was download Your stock firmwares cuz I knew it was gonna be a start of another journey with another Samsung device with lil to no development for it. Been doing research daily since then, You've been the most helpful & informative for Our cricket variant of the Grand Prime.
two559 said:
Any luck with that ? ? I bought this phone on Valentines Day with android 5.1.1. The first thing I did was download Your stock firmwares cuz I knew it was gonna be a start of another journey with another Samsung device with lil to no development for it. Been doing research daily since then, You've been the most helpful & informative for Our cricket variant of the Grand Prime.
Click to expand...
Click to collapse
Ya I am working on a few things but, honestly its going to be tough if I do happen to figure out a way for custom recovery xda forums will know first.
Helllo
I have a G530AZ, Itried to flash it with odin and it bricked. The phone doesn't turn on...not even in download mode....What can I do??. Can anyone help me...
edyrod84 said:
I have a G530AZ, Itried to flash it with odin and it bricked. The phone doesn't turn on...not even in download mode....What can I do??. Can anyone help me...
Click to expand...
Click to collapse
If I doesn't turn on at all. Then it's bricked. To make sure. Switch the battery or charge it. If it still doesn't turn on there is nothing you can do. But if you can get into Odin and download mode. There is hope and I have the files you'll need to salvage it.
Has anyone had any luck rooting this damn SM-G530AZ (5.1.1) ?? I've tried numerous methods and suggestions but so far this thing just won't give in....
EvilDoer360 said:
Has anyone had any luck rooting this damn SM-G530AZ (5.1.1) ?? I've tried numerous methods and suggestions but so far this thing just won't give in....
Click to expand...
Click to collapse
I rooted mine a while back, do you still need assistance?
i need some help, is there any custom recovery i can install for this phone?, cause i wanted to install the rom in this thread with flashify but i can't do it: http://forum.xda-developers.com/gran...285mb-t3415560
Layman instructions?
I just want to root my phone so that I can save whole apps on my sd card to free up so much space.
I'm just a layman though and have no idea what's being talked about or what the files are that you're sharing. I would really appreciate step by step layman instruction. Thank you so much if you can do that!
toxinburn said:
Okay I have seen various requests so I decided to hook it up, I had to pay for these but here ya go. I have full firmware for lollipop or kitakat and you can get them from the following links to my google drive.
https://drive.google.com/folderview?id=0BxcLJPerShJ_ZDJrNV9fRVBSdU0&usp=sharing
Within you will see two folders you can pick either kitkat or lollipop and to do a full flash download the files starting with ALL then flash with odin by placing in the pda section. The others shouldnt even be needed if your looking just to fully flash the device use the ones that start with the label ALL. Enjoy. Wish someone could get the bootloader unlocked for this variant. If their are any other variants that need firmware let me know ill see what i can do.
Click to expand...
Click to collapse
Hey, do you have a nandroid backup of your device (sm-g530az) that you could give me? My Samsung is dead, odin don?t recognize my device in download mode, only boot in recovery, and I can flash it with cwm. Please, you could help me?
VickMadrid said:
Hey, do you have a nandroid backup of your device (sm-g530az) that you could give me? My Samsung is dead, odin don?t recognize my device in download mode, only boot in recovery, and I can flash it with cwm. Please, you could help me?
Click to expand...
Click to collapse
their is no bootloader unlock or custom recovery for the 530az that i am aware of, so i never could make a nandroid backup. If you know of a way to actually use a custom recovery etc on the 530az I would make you a backup.
toxinburn said:
their is no bootloader unlock or custom recovery for the 530az that i am aware of, so i never could make a nandroid backup. If you know of a way to actually use a custom recovery etc on the 530az I would make you a backup.
Click to expand...
Click to collapse
That´s the history. I recieve the samsung (sm-g530az), but the smartphone don´t connect to wifi, when you choose the network only appear "Saved, Protected". No matter how much times you select the network, always appear the same thing and the device do nothing. Well, i thinked in that moment in change the firmware. I read in this forum a possible solution, that solution says "Download the Samsung Kies, then connect your device and select -upgrade your device-. Type your model and S/N, and Kies does the rest". I did it, everything seemed fine, until the process stopped. And an error message appears that says "Disconnect the phone and retire the battery, then turn on + ^ + home to start the emergency recovery". I did it all, but when i connect it, my pc, odin and kies don´t recognize it, my Samsung died. I put the phone in download mode and nothing happens. I reinstall the driver, kies and everything and odin at last recognize my device. Then I dowloaded "Philiz Touch Recovery" and I could flash it with odin. After all, I clean my device and prepare it for a custom rom. I installed it "cyanogenmod 12.1 unofficial", but when restart the device, it doesn't enter to the system, only boot in recovery or bootloader. But my pc don´t recognize my device in download mode, and I can´t flash it with odin. So I need the backup to restore my device.
Try to install "Philiz Touch Recovery" with Odin. I did it, and works for me. When I recieved the samsung, i don´t unlocked the device and I could flash the CWM. Thanks for your response
VickMadrid said:
That´s the history. I recieve the samsung (sm-g530az), but the smartphone don´t connect to wifi, when you choose the network only appear "Saved, Protected". No matter how much times you select the network, always appear the same thing and the device do nothing. Well, i thinked in that moment in change the firmware. I read in this forum a possible solution, that solution says "Download the Samsung Kies, then connect your device and select -upgrade your device-. Type your model and S/N, and Kies does the rest". I did it, everything seemed fine, until the process stopped. And an error message appears that says "Disconnect the phone and retire the battery, then turn on + ^ + home to start the emergency recovery". I did it all, but when i connect it, my pc, odin and kies don´t recognize it, my Samsung died. I put the phone in download mode and nothing happens. I reinstall the driver, kies and everything and odin at last recognize my device. Then I dowloaded "Philiz Touch Recovery" and I could flash it with odin. After all, I clean my device and prepare it for a custom rom. I installed it "cyanogenmod 12.1 unofficial", but when restart the device, it doesn't enter to the system, only boot in recovery or bootloader. But my pc don´t recognize my device in download mode, and I can´t flash it with odin. So I need the backup to restore my device.
Try to install "Philiz Touch Recovery" with Odin. I did it, and works for me. When I recieved the samsung, i don´t unlocked the device and I could flash the CWM. Thanks for your response
Click to expand...
Click to collapse
ya i think you messed up royally, their is no working philz or cwm for the 530AZ at all because the bootloader is locked soooo i dont see how you ever flashed it with that in the first place, but if you indeed were able to then it looks like you have a soft brick of sorts since the bootloader is locked on that model, their is firmware but you for some reason are unable to flash with odin so sadly I am not sure what else you could do other than maybe see if it is recognized on other usb ports or computer also check your device manager in windows and check and see if the usb device is listed if it shows a yellow exclamation or unknown device then manually update the driver for the unknown device as an android device
VickMadrid said:
Hey, do you have a nandroid backup of your device (sm-g530az) that you could give me? My Samsung is dead, odin don?t recognize my device in download mode, only boot in recovery, and I can flash it with cwm. Please, you could help me?
Click to expand...
Click to collapse
Since Odin won't recognize it
Give this a shot
http://forum.xda-developers.com/grand-prime/development/fix-g530-debrick-img-guide-to-make-t3422115
[Edit]didn't realize that comment was so old xD [/Edit]
Help!!
Autolounge said:
I rooted mine a while back, do you still need assistance?
Click to expand...
Click to collapse
I do! I have the 5.1.1 530AZ and no method for has worked, please let me know what you did.
benash2010 said:
I do! I have the 5.1.1 530AZ and no method for has worked, please let me know what you did.
Click to expand...
Click to collapse
That is the exact model I have so this should work! Use KingRoot but the desktop variant. And if that doesn't work use KingRoot, again the desktop variant. Let me know how it goes!
VickMadrid said:
That´s the history. I recieve the samsung (sm-g530az), but the smartphone don´t connect to wifi, when you choose the network only appear "Saved, Protected". No matter how much times you select the network, always appear the same thing and the device do nothing. Well, i thinked in that moment in change the firmware. I read in this forum a possible solution, that solution says "Download the Samsung Kies, then connect your device and select -upgrade your device-. Type your model and S/N, and Kies does the rest". I did it, everything seemed fine, until the process stopped. And an error message appears that says "Disconnect the phone and retire the battery, then turn on + ^ + home to start the emergency recovery". I did it all, but when i connect it, my pc, odin and kies don´t recognize it, my Samsung died. I put the phone in download mode and nothing happens. I reinstall the driver, kies and everything and odin at last recognize my device. Then I dowloaded "Philiz Touch Recovery" and I could flash it with odin. After all, I clean my device and prepare it for a custom rom. I installed it "cyanogenmod 12.1 unofficial", but when restart the device, it doesn't enter to the system, only boot in recovery or bootloader. But my pc don´t recognize my device in download mode, and I can´t flash it with odin. So I need the backup to restore my device.
Try to install "Philiz Touch Recovery" with Odin. I did it, and works for me. When I recieved the samsung, i don´t unlocked the device and I could flash the CWM. Thanks for your response
Click to expand...
Click to collapse
Hello, I know is late. Is already 2017 happy new year. But i was looking the post and reading the thread. I'm looking this information to try on my friend phone that want to root. Anyway. I maybe have a solution to fix the bootloop. since you went to philz recovery. There is a bug with philz recovery. If im correct. But i got it fixed with some zip file and using command on that flash. If you still need this solution let me know. I can post the zip file and step by step of the command.
Let me know
apk
Sorry for the file "CROM_Service.apk" for what?
Hey I need that!
Kangrito said:
Hello, I know is late. Is already 2017 happy new year. But i was looking the post and reading the thread. I'm looking this information to try on my friend phone that want to root. Anyway. I maybe have a solution to fix the bootloop. since you went to philz recovery. There is a bug with philz recovery. If im correct. But i got it fixed with some zip file and using command on that flash. If you still need this solution let me know. I can post the zip file and step by step of the command./
Let me know
Click to expand...
Click to collapse
HEY I REALLY NEED THAT!
I don't have the actual CWM on my phone yet. I just got it today. I already have it rooted, deodexed, and debloated(somewhat).
I was able to root it using kingroot. I'm still working for a way to replace the newest kingroot(5.1.0) with SuperSU.
But my question is does it actually work? Have you flashed the tar with odin and fix the code in it with commands.
Just reading your post gives me chills honestly. I like doing things as soon as I can! I'm a phoneaholic.
Related
Hello, I was attempting to flash Clockwork Mod on my G5, whilst doing it Odin crashed and now my phone is messed up.
It will turn on but a PC-Triangle with a ! in the middle-Phone, it will go into Download Mode but Odin doesn't recognise it so i can't re-flash it, any ideas?
Please help, this is urgent.
The phone itself is on stock, it turns on but displays the error i have described above, it will go into download mode but Odin doesn't recognsie it.
Thanks, Curtis.
CurtisAndroid5 said:
Hello, I was attempting to flash Clockwork Mod on my G5, whilst doing it Odin crashed and now my phone is messed up.
It will turn on but a PC-Triangle with a ! in the middle-Phone, it will go into Download Mode but Odin doesn't recognise it so i can't re-flash it, any ideas?
Please help, this is urgent.
The phone itself is on stock, it turns on but displays the error i have described above, it will go into download mode but Odin doesn't recognsie it.
Thanks, Curtis.
Click to expand...
Click to collapse
No need to worry about it.
Uninstall the drivers associated with the phone. Are you using Windows?
For XP: Go to start > Control Panel > System > Click on the Hardware tab and then Device Manager. Find the driver for the phone. I remember it has a yellow icon, and the drivers name is a mix of capital letters
It's probably similar for Windows 7, but i wouldn't know.
Uninstall the driver associated with the phone, then reinstall by plugging your phone into the computer in download mode. It would help to uninstall and reinstall Odin as well, just in case.
If you get Odin to work, just work away like you would.
Thanks for your reply, i have uninstalled the drivers, but when i plugged my phone back in, the drivers are not being installed and i can not find them on the internet. Any ideas?
I know how i messed up, i completely forgot to root my phone before i started to flash, any ideas on how i can just get my phone back to its normal working everyday self?
Will i just need to get the device recognised by Odin then insert the Ops file and the I5500.tar file and flash it back to stock?
edit- managed to get drivers installed, now how do i fix my phone? Just flash the .OPS and the stock I5500.tar file?
CurtisAndroid5 said:
Thanks for your reply, i have uninstalled the drivers, but when i plugged my phone back in, the drivers are not being installed and i can not find them on the internet. Any ideas?
I know how i messed up, i completely forgot to root my phone before i started to flash, any ideas on how i can just get my phone back to its normal working everyday self?
Will i just need to get the device recognised by Odin then insert the Ops file and the I5500.tar file and flash it back to stock?
edit- managed to get drivers installed, now how do i fix my phone? Just flash the .OPS and the stock I5500.tar file?
Click to expand...
Click to collapse
I think it'll fail again if your phone isn't rooted. You can't get rid of the Computer-Caution-Phone image without succesfully using Odin.
You could try to flash the .tar and .ops file again. I can't see it working though unfortunately.
Any ideas then? Is there a way to root my phone via Odin or anything?
CurtisAndroid5 said:
Any ideas then? Is there a way to root my phone via Odin or anything?
Click to expand...
Click to collapse
I've never heard of rooting your phone through the download mode or through Odin.
Maybe there's a file you can put on your phone through Odin which doesn't require root? I'll take a look around for you.
Thank you so much, i appreciate it, I'm 16, can't really live without a phone especially with college parties coming up in the next few days aha, I knew i shouldn't of risked around with flashing again!
CurtisAndroid5 said:
Thank you so much, i appreciate it, I'm 16, can't really live without a phone especially with college parties coming up in the next few days aha, I knew i shouldn't of risked around with flashing again!
Click to expand...
Click to collapse
Just thinking that Odin is a program which requires root so there won't be any file you can transfer when unrooted. I had a quick glance over at the Odin thread, and the first step is that you have to root your phone.
I'm sorry, but there's nothing else I can think of which might help. Maybe if somebody with a bit more knowledge/expeerience sees this thread, they might help.
Can Odin detect your phone?
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
CurtisAndroid5 said:
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
Click to expand...
Click to collapse
I don't know of any others, but Superoneclick works fine for the Galaxy 5. Like I said, I've never heard of using it during download mode so just be careful with that.
If Odin detects your phone, have you tried just closing Odin and plugging out the USB safely?
Can't use Superoneclick as my phone isn't in USB Debugging and i obviously can't change that aha I have just tried that, no luck with the closing Odin and unplugging it, should i try installing CWM again or is that a bad idea?
CurtisAndroid5 said:
Can't use Superoneclick as my phone isn't in USB Debugging and i obviously can't change that aha I have just tried that, no luck with the closing Odin and unplugging it, should i try installing CWM again or is that a bad idea?
Click to expand...
Click to collapse
It's a bad idea because it just won't work. Odin will crash again.
I don't know what to do I'm afraid.
Looks like my phone is shagged due to my own stupidity, I forgot to root it because my phone was previously rooted and it went back for repairs, then I completely forgot i didnt install Root access -.-
Do you think i can recover my phone or is it well and truly gone?
Well it's not like your phone is bricked or anything. It's just broken a connection to Odin and it won't boot until it's completed.
You could always return it for repairs again. Your warranty might be broken though.
If I happen to come across a DIY fix then I'll post it here.
Thanks for your help mate, i've decided to just send my phone back for repairs, buy a new phone (Probably a Blackberry for BBM and stuff with all my mates), and sell my phone once i get it back.I have gave up on Samsung mobiles.
Thank you.
Did you send your phone alredy? Uncompress the firmware.tar file and unselect "one package in Odin" . On the boot in odin select the boot file of the .tar and run odin. Maybe that will help
Sent from my Galaxy5 using XDA App
Dude have u tryd using samsung kies it might detect it n let u do an emergancy firmware recovery or maybe (a verry unlikely maybe but still a maybe) it will detect the problem and provide u a solution hope this helps.
CurtisAndroid5 said:
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
Click to expand...
Click to collapse
Hi, had the very same issue as you. Odin crashed just few sec after start. What I did ; uninstalled everything (Odin & files comes with it, KIES). Then restart PC, go to Samsung.com and download latest KIES, when downloaded go to Tools and check for updates. Accept/run them, when done restart PC. Now, read the steps bellow, and see the attached picture.
1. Extract Odin v4.28 and Ops File.zip I5500XXXX.rar
2. Open Odin v4.28,
- Select OPS tab: EUROPA_v1.0.ops
- Make sure Auto Reboot & Protect OPS selected in Option tab
- get this I5500XFJPQ from samfirware.com ( for some strange reason only this package worked!), download, and unzipp to folder called GT-I5500. In to this folder place Odin and ops as well.
- Make sure One Package selected in Option tab
3. Turn off phone, remove battery for 5second, put it back
4. Hold "Volume Down, Center button & Power button" in the same time to enter Download Mode (yellow triangle)
5. Connect to PC with USB cable
6. When the data line and the phone connection is successful, com port shows yellow in Odin
7. Press Start on Odin
8. Waitin & Pray!
9. PASS, its done!
*Hard reset after flashing *2767*3855#
*Check ur Phone Info *#*#1234#*#*
Note: my i5500 was rooted, so if was yours then ok. When pressing buttons you must see an yellow triangle! If you don't see it don't try connect. Remove battery for 3-5 minutes and try again...
Thanks for the replies, I've got my 'broken' phone in its box on my wardrobe, Carphone Warehouse have ordered me a brand new G5 to replace mine, I should get that sometime next week, but I'm buying a HTC Wildfire S pretty soon anyway!
Thanks for your help, I'd rather keep my broken phone well, broke aha.
Have you tried flashing twrp recovery then using cf-autoroot?
Silly me...I tried to flash the chainfire repack (ROM for Galaxy Note) using PC ODIN but...instead of selecting the file for 'PDA' I selected it for 'Phone' without realising until the FAIL message came up, now I can't flash the chainfire repack from 'PDA', my phone is still in download mode so please help me if I have done something wrong...which I know I have, thank you.
Btw...the repack is not working now using 'PDA' from PC Odin
SealsNavie said:
Silly me...I tried to flash the chainfire repack (ROM for Galaxy Note) using PC ODIN but...instead of selecting the file for 'PDA' I selected it for 'Phone' without realising until the FAIL message came up, now I can't flash the chainfire repack from 'PDA', my phone is still in download mode so please help me if I have done something wrong...which I know I have, thank you.
Btw...the repack is not working now using 'PDA' from PC Odin
Click to expand...
Click to collapse
You probably have thought of, and tried this but......
I have a galaxy nexus and found myself stuck in a very simalar situation.
I came accross a galaxy nexus toolkit by WugFresh, and i managed to get stock back on through the adb interface.
The toolkit automatically detected my phone and what version of the firmware it needed, downloaded it and flashed it on to my phone. It can also use the fastboot interface but adb is by far better in my personal opinion...
Maybe this could help you out, or maybe could even find a galaxy note version.
As your in a non working state atm, you have nothing to lose by at least giving it a go.
May not help, but i thought i would try and give some assistance.
Ictcreations said:
You probably have thought of, and tried this but......
I have a galaxy nexus and found myself stuck in a very simalar situation.
I came accross a galaxy nexus toolkit by WugFresh, and i managed to get stock back on through the adb interface.
The toolkit automatically detected my phone and what version of the firmware it needed, downloaded it and flashed it on to my phone. It can also use the fastboot interface but adb is by far better in my personal opinion...
Maybe this could help you out, or maybe could even find a galaxy note version.
As your in a non working state atm, you have nothing to lose by at least giving it a go.
May not help, but i thought i would try and give some assistance.
Click to expand...
Click to collapse
I forgot about this post, sorry. I also posted in the Galaxy Note general section where I replied, I thought I would risk it and reboot my phone and it rebooted as normal...phew!...and when I when back into download mode and tried flashing the ROM again...it worked! A little wierd but i'm happy I haven't done anything damanging to my phone, watch something happen tomorrow like my phone not turning on
glad you got it working again. there is nothing worse than banging your head against a brick wall with a broken phone!!
luckily these days, it is near impossible to brick a phone completely. thank heavens for small mercys!!
Hello everyone
I have a SII E120L with
Kernel: 2.6.35.11-120L.EL22.1023
Baseband: E120L.EL.0843LT
with the following problems:
- I can' t connect to a network
- I can't enter download mode.
I tried:
- upgrade via Kies: get your device does not support uipgrade via Kies
firmware version: E120LKRFB05/E120LKRFB05/E120LKREL21/E120LKREL21 (LGT)
- usb dongel to enter download mode: doesn't work
- when I connect the usb cable; and do the 3 button procedure when the green battery appears, then I can enter download mode, but the screen turns blank aftyer 2 seconds. I can see in Odin that the USB port is detetected but flashing results in an error (see pic1)
- I tried adb shell reboot download. This results in the download mode, but disapears after 2 seconds.
- I tried to root the device via DooMLoRD tootlkit but this results in an error:
failed to copy 'files\Superuser.apk' to '/system/app/./Superuser.apk': Read-only file system
I'd would like to be able to
- flash new firmware
and/or
- root the phone and so I can restore an efs.img file on the sdcard.
Can someone help me please?
sry for the fast answer i didn't read correctly,
i just edited this for those who dont know what im talking about,
did you try to flash to stock, your not using a stock rom as i can see in the picture
cabloomi said:
I'M NOT HOLD RESPONSAPBLE TO ANYTHING THAT HAPPENS TO YOUR PHONE
BY FOLLOWING THIS GUIDE YOU AGREE TO THE TERMS
HERE THESE ARE STOCK ROMS, WHAT YOUR USING IS NOT EVEN FLASH ABLE VIA ODIN (I THINK)
1. DOWNLOAD OLD BOOTLOADER
2. FLASH OLD BOOT LOADER BY
1. OPEN ODIN
2. CLICK BOOTLOADER BUTTON AND CHOOSE THE RECENTLY DOWNLOADED BOOTLOADER
3. TICK PHONE BOOTLOADER UPDATE
4. THEN CLICK START
>>>>PROBLEM SOLVED<<<<
Click to expand...
Click to collapse
Dude... he has an SII HD LTE. (E120L) Which has different CPU/SoC/GPU than the I9100.
I am about 95% certain I9100 firmwares will NOT WORK on his phone, and may, in fact, make his situation worse.
---------- Post added at 11:28 AM ---------- Previous post was at 11:15 AM ----------
vdbergh said:
Hello everyone
I have a SII E120L with
Kernel: 2.6.35.11-120L.EL22.1023
Baseband: E120L.EL.0843LT
with the following problems:
- I can' t connect to a network
- I can't enter download mode.
I tried:
- upgrade via Kies: get your device does not support uipgrade via Kies
firmware version: E120LKRFB05/E120LKRFB05/E120LKREL21/E120LKREL21 (LGT)
- usb dongel to enter download mode: doesn't work
- when I connect the usb cable; and do the 3 button procedure when the green battery appears, then I can enter download mode, but the screen turns blank aftyer 2 seconds. I can see in Odin that the USB port is detetected but flashing results in an error (see pic1)
- I tried adb shell reboot download. This results in the download mode, but disapears after 2 seconds.
- I tried to root the device via DooMLoRD tootlkit but this results in an error:
failed to copy 'files\Superuser.apk' to '/system/app/./Superuser.apk': Read-only file system
I'd would like to be able to
- flash new firmware
and/or
- root the phone and so I can restore an efs.img file on the sdcard.
Can someone help me please?
Click to expand...
Click to collapse
First off, do NOT follow that guy's advice above, unless you want to brick your phone.
Second, try reading/searching this thread. I myself did a quick perusal of it and found that someone in it mentioned that they were able to root their E120L or S by flashing Tegrak kernel. Search around for it.
@vdbergh, sorry, I noticed you already posted in that other thread.
About your issue; are you plugged into a mainboard USB port on your computer? Using a USB hub or keyboard passthrough can cause issues. Have you tried different cables? It could be a bad cable.
ctomgee said:
@vdbergh, sorry, I noticed you already posted in that other thread.
About your issue; are you plugged into a mainboard USB port on your computer? Using a USB hub or keyboard passthrough can cause issues. Have you tried different cables? It could be a bad cable.
Click to expand...
Click to collapse
ctomgee, thanks for the effort to try to help me!
I am connected to the main USB port of my computer. I also changed the cable. Result is the same.
I think something is wrong with the firmware. Here's the history.
I had a perfectly good working phone. Then I wanted to flash the TL1.3. Something went wrong in that process and stupid me, I reseted the phone. Since then the phone was bricked. I tried everything but no success.
I sent the phonbe for JTAG repair. They manage to reanimate the phone, but it was impossible to get a network. All the est worked fine but I could't make phonecalls.
When I started Kies, it said to upgrade the firmware. The kernel upgrade went fine but the baseband upgrate got an error. I had the posibility to do an emergency recovery in Kies, but as soon as I start that, Kies doesn't recognice the phone.
Flashing new firmware via Odin doesn't work eiter.
The only small possibility I see is to restore a backup efs.img I found. But to do that the phone needs to be rooted. I can't do that via Odin so I tried the DooMLoRD tootlkit to root the phone. This doesn't work because I get an error that the filesystem is Read-Only.
Maybe I could root or upgrade the firmware via the recovery mode (apply update from sdcard option)?
So I'm very desperate now. I just don't know what to do anymore.
vdbergh said:
ctomgee, thanks for the effort to try to help me!
I am connected to the main USB port of my computer. I also changed the cable. Result is the same.
I think something is wrong with the firmware. Here's the history.
I had a perfectly good working phone. Then I wanted to flash the TL1.3. Something went wrong in that process and stupid me, I reseted the phone. Since then the phone was bricked. I tried everything but no success.
I sent the phonbe for JTAG repair. They manage to reanimate the phone, but it was impossible to get a network. All the est worked fine but I could't make phonecalls.
When I started Kies, it said to upgrade the firmware. The kernel upgrade went fine but the baseband upgrate got an error. I had the posibility to do an emergency recovery in Kies, but as soon as I start that, Kies doesn't recognice the phone.
Flashing new firmware via Odin doesn't work eiter.
The only small possibility I see is to restore a backup efs.img I found. But to do that the phone needs to be rooted. I can't do that via Odin so I tried the DooMLoRD tootlkit to root the phone. This doesn't work because I get an error that the filesystem is Read-Only.
Maybe I could root or upgrade the firmware via the recovery mode (apply update from sdcard option)?
So I'm very desperate now. I just don't know what to do anymore.
Click to expand...
Click to collapse
I would get the latest firmware available via CheckFUS. (if you don't know what that is, just google it) Then flash it via Odin. Let's start there.
Use gingerbreak in my signature, it doesnt even need a computer, just put it on your sd and install it, then let it do it's magic
cabloomi said:
Use gingerbreak in my signature, it doesnt even need a computer, just put it on your sd and install it, then let it do it's magic
Click to expand...
Click to collapse
Thanks for the tips cabloomi...
The checkFus didn't work. ( the SHV-E120L (SII HD LTE) is not in the list).
I tried the Gingerbreak, but I do't think the E120L is supported yet. It run's for ever without rooting the phone
vdbergh said:
Thanks for the tips cabloomi...
The checkFus didn't work. ( the SHV-E120L (SII HD LTE) is not in the list).
I tried the Gingerbreak, but I do't think the E120L is supported yet. It run's for ever without rooting the phone
Click to expand...
Click to collapse
My apologies... I didn't double check to see if the E120L was in Check FUS. Hmm. I'm not sure where you can get stock firmwares for the SHV-E120 series, unfortunately. (at least, on English language websites) Sorry dude, wish I could be of more help.
ctomgee said:
My apologies... I didn't double check to see if the E120L was in Check FUS. Hmm. I'm not sure where you can get stock firmwares for the SHV-E120 series, unfortunately. (at least, on English language websites) Sorry dude, wish I could be of more help.
Click to expand...
Click to collapse
Thanks for your help ctomgee, I realy appreciate it.
I manage to root the phone by flashing the Tegrak-Kernel-Build-33-for-SHV-E120L-FB05.recovery.tar and installing the zip file in recovery mode.
I still can't connect to a network and I can't flash new firmware. All the flashing ends with an error that the NAND or amss.bin can't be writen to the phone.
Someoine has an idea what I can try now?
vdbergh said:
Thanks for your help cabloomi, I realy appreciate it.
I manage to root the phone by flashing the Tegrak-Kernel-Build-33-for-SHV-E120L-FB05.recovery.tar and installing the zip file in recovery mode.
I still can't connect to a network and I can't flash new firmware. All the flashing ends with an error that the NAND or amss.bin can't be writen to the phone.
Someoine has an idea what I can try now?
Click to expand...
Click to collapse
Please don't get me mixed up with cabloomi...
Thanks for your help, Ctomgee...
The problem that I couln't enter download mode or root my phone is solved with your help.
I still have a probem with the radio/basebad, but I'll post that in another thread.
I recently got my new Verizon Galaxy S4 and decided to play around with it. I got it rooted fine and got a few apps on there (like Titanium backup) and decided that, since I would eventually want to play around with ROMs, I would want to unlock the phone.
I looked around and found there were some options for me, the one I chose being the "all in one" option that roots, unlocks and installs a custom recovery mode for you. I went through this process and now get nothing but the Downloader Mode (could not do normal boot). Even if I pop out the battery and try to reboot it, I get this screen.
I later found that apparently the ME7 model currently will not accept attempts to unlock the phone and install a custom ROM or recovery menu. How do I fix this? I tried using Odin, but it doesn't recognize the phone as being connected. I am currently trying other methods like Kies, to see if there is any way to at least to an emergency recovery and get it back to normal.
EDIT: Ran into the same issue with Kies as I did with Odin, it does not see anything connected to the computer.
Do you have the correct drivers installed? Does adb recognize the device? You're in Odin mode when you try to use Odin to push something? I believe with ME7 you can Odin back to the official stuff.
Sent from my SCH-I545 using Tapatalk 4
TheColdOne said:
I recently got my new Verizon Galaxy S4 and decided to play around with it. I got it rooted fine and got a few apps on there (like Titanium backup) and decided that, since I would eventually want to play around with ROMs, I would want to unlock the phone.
I looked around and found there were some options for me, the one I chose being the "all in one" option that roots, unlocks and installs a custom recovery mode for you. I went through this process and now get nothing but the Downloader Mode (could not do normal boot). Even if I pop out the battery and try to reboot it, I get this screen.
I later found that apparently the ME7 model currently will not accept attempts to unlock the phone and install a custom ROM or recovery menu. How do I fix this? I tried using Odin, but it doesn't recognize the phone as being connected. I am currently trying other methods like Kies, to see if there is any way to at least to an emergency recovery and get it back to normal.
EDIT: Ran into the same issue with Kies as I did with Odin, it does not see anything connected to the computer.
Click to expand...
Click to collapse
You need to make sure you have the drivers for the phone and have a solid USB connection (I prefer the rear of a tower)
sent from my GE gs4
I ended up getting it to work. I had to go here:
http://www.intel.com/support/chipsets/inf/sb/CS-013541.htm
and get files to get the computer to recognize the device. Even afterwards, Keis had no idea what was going on, and Odin saw it and was able to install a stock firmware I downloaded earlier, saving the phone.
For now I will be satisfied with just root access and will wait for ROM capabilities.
I hate to hijack a thread but I'm stuck here. My GS 4 (Vzw) was supposedly successfully rooted using TWRP, but now I have no way to enter any sort of recovery. The package I downloaded for the root does not have an Odin version to run. I've been getting the endless prompts to install the 4.3 update but there is no way to do this on my phone. I get the same "Could not do normal boot. Odin mode. Write protection enabled" message with the downloading screen. I try to boot into recovery via CWM or Goomanager but it always goes to the same screen. I can't make any backups or restore now either or I would just do a factory reset. Any ideas? I'm on VRUAME7.
Um.... there's no recovery available with ME7.... are you on the MDK bootloader?
Sent from your mom's smartphone
I don't think so but how would I confirm? I'm just trying to get the 4.3 update installed but at every attempt it goes into Odin Mode and gets stuck.
BoltsRUs said:
I don't think so but how would I confirm? I'm just trying to get the 4.3 update installed but at every attempt it goes into Odin Mode and gets stuck.
Click to expand...
Click to collapse
You're said that you're on ME7 - what you need to do is to flash the "No wipe" ME7 ROM onto your phone. It's in the Development forum.
http://forum.xda-developers.com/showthread.php?t=2301259
You've got to update to MI1 before you can install the 4.3 update (MJ7).
ONLY flash files intended for whatever release you're running. You can't mix and match, can't go backwards, and can't skip updates.
Theres also an ml1 factory image in the dev section.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
TheColdOne said:
I ended up getting it to work. I had to go here:
and get files to get the computer to recognize the device. Even afterwards, Keis had no idea what was going on, and Odin saw it and was able to install a stock firmware I downloaded earlier, saving the phone.
For now I will be satisfied with just root access and will wait for ROM capabilities.
Click to expand...
Click to collapse
Hi! Sorry to kind of "butt in" on your thread, but I'm somewhat of a noob and have the same exact problem as you. If you don't mind, can you explain what you downloaded from Intel and what you did afterwards that fixed your problem? I'd really appreciate it, since my phone's been dead to me for more than a week now....
nyankat said:
Hi! Sorry to kind of "butt in" on your thread, but I'm somewhat of a noob and have the same exact problem as you. If you don't mind, can you explain what you downloaded from Intel and what you did afterwards that fixed your problem? I'd really appreciate it, since my phone's been dead to me for more than a week now....
Click to expand...
Click to collapse
On that page I linked to, look for this:
Solution:
Download and run the Intel® Chipset Software Installation Utility so Windows* properly recognizes the SMBus controller.
Get the proper driver download according to your OS, then install it. This should allow Odin to see the phone for you to install a clean copy of the stock ROM onto the phone.
If you want more details I am sorry to say I cannot provide them. When things involve me fixing my own technology, it is a lot of rapid-fire troubleshooting and I just go with what sticks without really memorizing what I did (so if I run into this issue again, I have to re-research).
TheColdOne said:
On that page I linked to, look for this:
Solution:
Download and run the Intel® Chipset Software Installation Utility so Windows* properly recognizes the SMBus controller.
Get the proper driver download according to your OS, then install it. This should allow Odin to see the phone for you to install a clean copy of the stock ROM onto the phone.
If you want more details I am sorry to say I cannot provide them. When things involve me fixing my own technology, it is a lot of rapid-fire troubleshooting and I just go with what sticks without really memorizing what I did (so if I run into this issue again, I have to re-research).
Click to expand...
Click to collapse
Thanks! Finally Oden recognizes my phone
my amazing method
the same problem was with me 3-4 weeks ago...
follow the url-
dbloo dbloo dbloo dot autoroot dot chainfire dot eu
(i cant post the URL because the website is not allowing me.....understand and use the code)
1) choose your samsung model and download the recovery file
2) download and open odin on a dekstop
3) connect your device to the dekstop
4) press the volume down, home button and power button together till the screen changes
5) press the volume down button again
6) odin will show the message "attatched or connected"
7) click pda
8) attatch the file you downloaded
9) your device will be fixed and will be restarted
ur welcome
hai i am stuck at download mode with message as could not normal boot how to fix it
Was trying to go from GB 2.3.3 to OmniROM 4.4.4 on a friend’s S2 (GT I-9100).
I rooted using Framaroot (the first version, the latest wouldnt work), got root, checked with RootChecker. Then I tried to install CWM.
Spent hours trying, I wanted to do everything "on device" rather than use Heidal or ADB (use inux on my desktop), tried MobileOdin, but there was no "recovery" option, so tried ROM Manager using a guide ( http://luvis.se/tipstricks/root-and-install-kitkat-on-samsung-galaxy-s2-i9100-without-a-computer/ ), but kept failing cos of E signature verification, even though ROM Manager said it was installed.
I d spent hours and hours on the internet looking for how to install, seems its difficult because the device was GB.
So I tried MobileOdin again and just installed the "CWM-KitKatCompatible-i9100.zip" I downloaded from the above guide using the "install update.zip" option, I cancelled it when the warning came up about firmware can brick your device, but then hit "ok" (partly in frustration and partly cos I ve never bricked a device before as I m (USUALLY) always careful).
Now it just boots the the Samsung Galaxy S2 screen, then the screen goes blank after 10 seconds or so. Stupid, stupid me.
So can anyone help me recover it using ADB, Android Studio or maybe Heimdal or direct me to a guide on how to ? Everything I read uses Odin and assumes you can get into recovery. All that time trying to avoid connecting it to a pc and now I ve deffo got to.
typos1 said:
Was trying to go from GB 2.3.3 to OmniROM 4.4.4 on a friend’s S2 (GT I-9100).
I rooted using Framaroot (the first version, the latest wouldnt work), got root, checked with RootChecker. Then I tried to install CWM.
Spent hours trying, I wanted to do everything "on device" rather than use Heidal or ADB (use inux on my desktop), tried MobileOdin, but there was no "recovery" option, so tried ROM Manager using a guide ( http://luvis.se/tipstricks/root-and-install-kitkat-on-samsung-galaxy-s2-i9100-without-a-computer/ ), but kept failing cos of E signature verification, even though ROM Manager said it was installed.
I d spent hours and hours on the internet looking for how to install, seems its difficult because the device was GB.
So I tried MobileOdin again and just installed the "CWM-KitKatCompatible-i9100.zip" I downloaded from the above guide using the "install update.zip" option, I cancelled it when the warning came up about firmware can brick your device, but then hit "ok" (partly in frustration and partly cos I ve never bricked a device before as I m (USUALLY) always careful).
Now it just boots the the Samsung Galaxy S2 screen, then the screen goes blank after 10 seconds or so. Stupid, stupid me.
So can anyone help me recover it using ADB, Android Studio or maybe Heimdal or direct me to a guide on how to ? Everything I read uses Odin and assumes you can get into recovery. All that time trying to avoid connecting it to a pc and now I ve deffo got to.
Click to expand...
Click to collapse
Can you get into download or recovery mode?
noppy22 said:
Can you get into download or recovery mode?
Click to expand...
Click to collapse
Cant get into recovery but can get into download mode. Tried One-click Unbrick and it cant connect to device, which reminded me that when I connected it to my (Ubuntu) pc (before I bricked it) I got an error message saying it couldn’t mount Android device (I got rid of my S2 a couple of years ago but it always connected to my pc with no problems). Which seems to me like a real problem - how can I un-brick it if I cant connect via USB ?
typos1 said:
Cant get into recovery but can get into download mode. Tried One-click Unbrick and it cant connect to device, which reminded me that when I connected it to my (Ubuntu) pc (before I bricked it) I got an error message saying it couldn’t mount Android device (I got rid of my S2 a couple of years ago but it always connected to my pc with no problems). Which seems to me like a real problem - how can I un-brick it if I cant connect via USB ?
Click to expand...
Click to collapse
First, I don't have any experience with ubuntu, so I would suggest connecting to a windows pc via usb, making sure you install the drivers for the s2, then download odin. Once you have odin setup, I would flash a stock rom .tar from sammobile.com. From there you can flash a kernel such as philz to gain root access, and then omni or other rom.
noppy22 said:
First, I don't have any experience with ubuntu, so I would suggest connecting to a windows pc via usb, making sure you install the drivers for the s2, then download odin. Once you have odin setup, I would flash a stock rom .tar from sammobile.com. From there you can flash a kernel such as philz to gain root access, and then omni or other rom.
Click to expand...
Click to collapse
Heimdal on Ubuntu (or a Mac) will do the same job as Odin on Windows (and is more reliable), but I have this USB problem I mentioned above, so I m not sure anything is going to work if theres a problem with USB on the device (USB debugging was enabled). One-Click Unbrick cannot connect to it and nor can my pc.
typos1 said:
Heimdal on Ubuntu (or a Mac) will do the same job as Odin on Windows (and is more reliable), but I have this USB problem I mentioned above, so I m not sure anything is going to work if theres a problem with USB on the device (USB debugging was enabled). One-Click Unbrick cannot connect to it and nor can my pc.
Click to expand...
Click to collapse
Probably obvious, and you've maybe tried already, but will a different usb data cord work? And I would try a different pc just to rule it out.
Here is something to read as well about recovering from soft bricks. Hope it helps -
http://forum.xda-developers.com/galaxy-s2/general/guide-fix-unflashable-soft-bricked-gsii-t1449771
noppy22 said:
Probably obvious, and you've maybe tried already, but will a different usb data cord work? And I would try a different pc just to rule it out.
Here is something to read as well about recovering from soft bricks. Hope it helps -
http://forum.xda-developers.com/galaxy-s2/general/guide-fix-unflashable-soft-bricked-gsii-t1449771
Click to expand...
Click to collapse
Thanks, already read that, its not the cable as I use it on other devices without problems.
typos1 said:
Thanks, already read that, its not the cable as I use it on other devices without problems.
Click to expand...
Click to collapse
Mate, the only thing I can suggest is make sure you have drivers for the phone(although the message saying can't mount device indicates a problem like corrupted partitions or nand, rather than missing drivers), and try a different pc. The fact you can get into download mode at least suggests you can flash a kernel or something, but you need a connection to the pc to do that(as you already know). I hope someone else has some other ideas
noppy22 said:
Mate, the only thing I can suggest is make sure you have drivers for the phone(although the message saying can't mount device indicates a problem like corrupted partitions or nand, rather than missing drivers), and try a different pc. The fact you can get into download mode at least suggests you can flash a kernel or something, but you need a connection to the pc to do that(as you already know). I hope someone else has some other ideas
Click to expand...
Click to collapse
I wont need drivers as Linux has drivers built into it - it works out of the box, no messing around installing them like with Windows.
I just gotta spend some time getting the firmware and finding instructions on doing it with Heimdall, theres so many versions of the S2 it makes finding the right software complex.
And I ve just got to hope there isnt a problem with the usb port on the device or I m really buggered
typos1 said:
I wont need drivers as Linux has drivers built into it - it works out of the box, no messing around installing them like with Windows.
I just gotta spend some time getting the firmware and finding instructions on doing it with Heimdall, theres so many versions of the S2 it makes finding the right software complex.
And I ve just got to hope there isnt a problem with the usb port on the device or I m really buggered
Click to expand...
Click to collapse
Lol, I forgot that on Samsung devices you have to press home as well as power and vol up for recovery, found this out while trying to fins out how to unbrick it !
It wouldnnt boot but it WOULD boot to recovery, CWM recovery !
So flashed a CM kernel then Omni and all is fine, OmniROM installed !
typos1 said:
Lol, I forgot that on Samsung devices you have to press home as well as power and vol up for recovery, found this out while trying to fins out how to unbrick it !
It wouldnnt boot but it WOULD boot to recovery, CWM recovery !
So flashed a CM kernel then Omni and all is fine, OmniROM installed !
Click to expand...
Click to collapse
Haha! The simple things in life....
noppy22 said:
Haha! The simple things in life....
Click to expand...
Click to collapse
Yeah !
Ta for your input !
Try flashing official frimware with odin or flash siyah kernel with heimdal
Should fix your problem