Hi, yesterday I received the update for Marshmallow but from then I cannot pair my watch anymore, I already factory reset, reboot phone, uninstall android wear app, but nothing worked
I have the same problem.
I can pair with my Moto G 1st gen, running 5.x, but My HTC M8 running 6.0.1 will not pair.
Right on the screen that it shows the Bluetooth code, when I hit Pair, it immediately gives me an error message to make sure that the watch has Wifi On and near the Phone.
---------- Post added at 01:49 AM ---------- Previous post was at 12:59 AM ----------
I just reverted back to Tmobile Stock Rom from Viper and it picked up instantly. I tried Viper after a system reset and the problem came back. So, at least in my case, it was a ROM issue.
I will now try it with Viper and No Root.
Yeah, me too, my n4 was on pure nexus project rom, I came back to stock Lollipop and it worked, it seems that google don't want us to use custom rom
Actually, I'm fine now with the AICP Rom with root. I'm hoping they will fix the problem that's causing it, so I can switch back to the Sense Rom.
I found that CM 13 nightly work, but AOSP don't, that's weird
Well, my CM 13 nightly is NOT working...although my Nexus 9 AND 10, both on Marshmallow connect fine.
Related
Q&A for [ROM][I605]Cyanogenmod 12.0 [12/12/14]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][I605]Cyanogenmod 12.0 [12/12/14]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Wow
glockman4519 said:
I'm going to have to give that a shot. Thanks.
Click to expand...
Click to collapse
Thanks for the Lp rom will try it out when its more stable
Nice build BTW so far I can only get to the loading screen and bootloops.
Device: SHV-E250S
I tried dirty flashing from CM11 to CM12. Also flashed signed converter e250s but only stuck on Samsung Logo then reboots.
Flashed different Kernels and finally CM Logo appeared but it was sitting there for 45 mins and nothing happens.
Thanks
Nice Job
I went ahead and flashed this bad boy after reading up on it and noticed that its smooth and I got mobile data working calls and texts working only had issues with the camera and gps otherwise I was impressed with the rom build being so early and running so smooth way to go keep up the hard work and im sure its not just me but we all appreciate what you are doing for the Note 2 community Thanks Again
Working
I got the install working as correctly as everyone else.
I originally tried just dirty flashing over my current ROM(LiquidSmooth 3.2 Milestone based on 4.4.4) and that didn't work right. I factory reset and then went right to an install. Haven't had to play with any settings beyond the keyboard to get everything working correctly.
I can make and receive phone calls
Front facing camera is the only of the two that works.
Texts and can be received no problem, I haven't been able to try MMS as I get almost no service at my house as it is.
Overall this ROM works freaking great. Thanks @sbrissen!
Agree with moovlin. Been working well though occasionally dropping data. Couldn't thumbs up the solution since to new to this forum.
Sent from my SCH-I605 using Tapatalk
Update Issues
The last couple times I've tried updating from within the phone OS, I get a boot lock or a lot of FCs after. Will see if I can get it unstuck with a battery pull and a manual update. Is that feature not really working yet? or only with certain recoveries?
Thanks
---------- Post added at 04:21 PM ---------- Previous post was at 03:36 PM ----------
From within OS fails on my phone FCs nothing works most all setting lost, downloaded to extcard and updated, worse, it doesn't see my SIM card, and FCs. I'll try one more time with a full wipe and hope for the best. Anyone else having these issues? Worked good with this one from the weekend cm_i605-ota-bfb35cbe6b.
---------- Post added at 04:45 PM ---------- Previous post was at 04:21 PM ----------
Full clean wipe and reset seem to have fixed the issues. Letting it do it's restore process. A new feature maybe? Or just new window paint on the old process. I used today's update, and the 11/09 gapps here. I know there are several updates to the GAPPs too, but getting the phone to work again is most important. Keyboard does popup right away, I don't care for that keyboard at all, but hopefully with the reset, it will load and I can just select it again.
Seems to be going well so far. A lot of aps to download again. I hadn't setup the backup software to run yet...
Working
I installed this about a week ago and it's been working great! I haven't had any of the SMS or battery (wakelock) issues that others have reported, but i did have an issue where i could not make outgoing calls (it would immediately say "call ended", but the other side would ring) when it was first installed. It fixed itself after a couple of days. This is on the 12/17 build with the GPS hotfix. This is my first time installed a non-TW ROM, but I'm glad i tried it out! Keep up the good work!
Boot Loop
I'm trying to flash to the nightlies cm12's. i've done a fresh wipe. when i restart the it gets to the "updating apps" and reboots after it finishes the updates. after it just continues rebooting after a minute. any suggestions?
Could not receive incoming or hang up outgoing phone call. on CM12.1
I am using netzclub in Germany, data and SMS are fine. However, I find myself could not hang up on outgoing phone call. Incoming calls are a bit more tricky. The only call I could receive so far is the one from Google verification. The one who is calling can hear ringing and get directed to the voice mail.
I can try get a logcat. Shall I change the level of logcat?
It actually start from CM12 builds. I have tried wiping and fresh installation, nothing works, though.
I'm still on CM12, the build from April 16th, but I'm not quite ready to make the change to 12.1. I wanted to flash the last CM12 nightly, but I can't download it. Are the builds gradually rotated off of the site, or deprecated? Is there any other way I could download the last CM12 nightly?
Can't get GAPPs in CyanogenMod 12.1
I have a Verizon Note II SCH-1605. I had some version of CyanogenMod 12.0 installed, which included GAPPs. All was cool except GPS would not work; it kept turning High Accuracy mode off. So I'm trying to see if 12.1 is any better.
I can install cm-12.1-20150505-NIGHTLY-i605 with no issue using TWRP 2.6.0.1. When I try to install gapps-5.1-arm-2015-05-03-16-32-37 from the CyanogenMod web site or gapps-lp-20141109-signed from the [ROM][I605]Official Nightlies CM 12.1 thread or one or two others that I forget I get "set_metadata_recursive: some changes failed."
Anybody know of a GAPPPs version that might work?
---------- Post added at 12:59 PM ---------- Previous post was at 12:18 PM ----------
Forgot to mention that I wiped everything except the external sdcard, and I tried installing the gapps at the same time as CyanogenMod or after CyanogenMod is all set up.
jobren said:
I am using netzclub in Germany, data and SMS are fine. However, I find myself could not hang up on outgoing phone call. Incoming calls are a bit more tricky. The only call I could receive so far is the one from Google verification. The one who is calling can hear ringing and get directed to the voice mail.
I can try get a logcat. Shall I change the level of logcat?
It actually start from CM12 builds. I have tried wiping and fresh installation, nothing works, though.
Click to expand...
Click to collapse
Same issue here as well. I've tried the latest i605 nightly and the problem is still present. I've had to revert to a CM12 build dated 30 Jan 2015 in order to have a working phone.
Can we get the APN fixed?
Are u on a nightly build ?
Yes I stay current with the nightlies .
Wrapscallion said:
I'm still on CM12, the build from April 16th, but I'm not quite ready to make the change to 12.1. I wanted to flash the last CM12 nightly, but I can't download it. Are the builds gradually rotated off of the site, or deprecated? Is there any other way I could download the last CM12 nightly?
Click to expand...
Click to collapse
Here you can found all new version of the nightly build : http://download.cyanogenmod.org/?device=i605&type=nightly
Don't forget that if you are on a nightly build you have to flash your phone with a nighty update, you can switch between builds.
DISCLAIMER: I AM IN NO WAY RESPONSIBLE FOR ANY PROBLEMS ON YOUR DEVICES CAUSED BY FLASHING THESE BUILDS. THE UPSTREAM CODE AND BUILDING IS MAINTAINED BY THE CYANOGENMOD TEAM, NOT ME. I AM NOT ASSOCIATED WITH THEIR TEAM, I AM JUST THE THREAD OWNER.
What is CyanogenMod ? It is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors of these cell phones.
CyanogenMod 13.0 : Download
Changelog : Changelog
Open GApps : Download ( arm, 6.0, nano )
TWRP : Download​
CM13 Nightlies, ROM for the Sprint Galaxy S5
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Nightly, now moved to 14.1
UPDATE 6/14: Looks like there's an issue that 5ghz network doesn't work on higher bands, but it works on 36-48 and bluetooth. Hopefully it will be fixed soon.
UPDATE 6/23: There's a fix attempt on boot image. Link. Thanks to @haggertk
UPDATE 6/27: Looks like Bluetooth and Wifi issue have been fixed since 6/25 nightly.
Thanks to @haggertk
Created 2016-05-12
Last Updated 2016-11-29
Reserved
Works great!
Is there a version of SuperSU that works with CM13? All trash the ROM and have to do full restore.
I just needed confirmation on something. I'm currently running CM12.1 on a SM-G900P with firmware G900PVPU3BOK4. Does the update to CM 13.0 require a firmware update to G900PVPU3CPCA (the MM level of firmware from the stock Sprint download) or can I stay on G900PVPU3BOK4 with CM13.0?
btw: Sorry for the double post. I'm new to XDA and having trouble figuring out which forum is correct for me to ask my questions in.
Thanks!
alexclang said:
I just needed confirmation on something. I'm currently running CM12.1 on a SM-G900P with firmware G900PVPU3BOK4. Does the update to CM 13.0 require a firmware update to G900PVPU3CPCA (the MM level of firmware from the stock Sprint download) or can I stay on G900PVPU3BOK4 with CM13.0?
btw: Sorry for the double post. I'm new to XDA and having trouble figuring out which forum is correct for me to ask my questions in.
Thanks!
Click to expand...
Click to collapse
From my limited experience, it does not appear to run on CPCA. CM13 on OK4 worked for me.
e-j said:
From my limited experience, it does not appear to run on CPCA. CM13 on OK4 worked for me.
Click to expand...
Click to collapse
Excellent!! I'll just install the latest nightly for CM13 just like I was going for 12.1 and hopefully things will go smoothly!
I'm having difficulty with CM13 and Open GApps. If I flash CM13 alone everything is fine. When I install CM13 and then the ARM 6.0 pico Open GApps through the same TWRP 3.0.2-1 session (as directed here: https://github.com/opengapps/opengapps/wiki/Notes-for-Android-6.0), I either get constant force close errors after boot (with 5/19 CM & GApps zips) or an endless blue android boot screen (with 5/20 CM & GApps zips). I've tried re-downloading the zips and reinstalling after wiping (dalvik, system, data, cache) multiple times.
Any ideas?
UPDATE/PSA: USE THE NANO GAPPS AS STATED IN THE OP. NANOGAPPS INFINITY OPENS THE DOOR.
e-j said:
I'm having difficulty with CM13 and Open GApps. If I flash CM13 alone everything is fine. When I install CM13 and then the ARM 6.0 pico Open GApps through the same TWRP 3.0.2-1 session (as directed here: https://github.com/opengapps/opengapps/wiki/Notes-for-Android-6.0), I either get constant force close errors after boot (with 5/19 CM & GApps zips) or an endless blue android boot screen (with 5/20 CM & GApps zips). I've tried re-downloading the zips and reinstalling after wiping (dalvik, system, data, cache) multiple times.
Any ideas?
Click to expand...
Click to collapse
I've had similar issues; all with Google apps. When I see it, I delete the Google app in question and then immediately re-install from the App store. Once I've done that, I haven't had the Google app force quit again.
alexclang said:
I've had similar issues; all with Google apps. When I see it, I delete the Google app in question and then immediately re-install from the App store. Once I've done that, I haven't had the Google app force quit again.
Click to expand...
Click to collapse
Got it working after I realized the OP specifically mentioned the "nano" GApps variant; booted fine after a clean install of CM13 & the nano zip.
Issues w. CM13 flash
Ok... slightly frustrated here.
Basic issue: Have flashed CM13 (Nightly 5.17.16) along with the latest Gapps. Upon reboot my phone will go to the Cyanagenmod splash screen, appear to load for several seconds, and then restart. It keeps doing this for at least 10 minutes until I turn it off. I have re-flashed a couple times after reloading the backup but no change.
Process I used: First of all my phone already has Android 6.0.1 firmware installed (not sure if that's an issue). I have TWRP setup as recovery and rooted with su 2.52 (and yes I verified the root prior to flashing). To flash I boot into recovery (obviously), factory reset, install cm13, clear dalvik, and repeat process with gapps. I've done this before with older CM's successfully but for some reason I can't get past the CM splash screen.
Any assistance is appreciated. If I have made a completely stupid error in my process or this exact issue is covered in another thread don't hesitate to point that out!!
Thank you in advance.
smspenc said:
Ok... slightly frustrated here.
Basic issue: Have flashed CM13 (Nightly 5.17.16) along with the latest Gapps. Upon reboot my phone will go to the Cyanagenmod splash screen, appear to load for several seconds, and then restart. It keeps doing this for at least 10 minutes until I turn it off. I have re-flashed a couple times after reloading the backup but no change.
Process I used: First of all my phone already has Android 6.0.1 firmware installed (not sure if that's an issue). I have TWRP setup as recovery and rooted with su 2.52 (and yes I verified the root prior to flashing). To flash I boot into recovery (obviously), factory reset, install cm13, clear dalvik, and repeat process with gapps. I've done this before with older CM's successfully but for some reason I can't get past the CM splash screen.
Any assistance is appreciated. If I have made a completely stupid error in my process or this exact issue is covered in another thread don't hesitate to point that out!!
Thank you in advance.
Click to expand...
Click to collapse
Would boot loop on the latest firmware for me as well; had to Odin back to OK4.
smspenc said:
Ok... slightly frustrated here.
Basic issue: Have flashed CM13 (Nightly 5.17.16) along with the latest Gapps. Upon reboot my phone will go to the Cyanagenmod splash screen, appear to load for several seconds, and then restart. It keeps doing this for at least 10 minutes until I turn it off. I have re-flashed a couple times after reloading the backup but no change.
Process I used: First of all my phone already has Android 6.0.1 firmware installed (not sure if that's an issue). I have TWRP setup as recovery and rooted with su 2.52 (and yes I verified the root prior to flashing). To flash I boot into recovery (obviously), factory reset, install cm13, clear dalvik, and repeat process with gapps. I've done this before with older CM's successfully but for some reason I can't get past the CM splash screen.
Any assistance is appreciated. If I have made a completely stupid error in my process or this exact issue is covered in another thread don't hesitate to point that out!!
Thank you in advance.
Click to expand...
Click to collapse
You had the official MM installed from Samsung, correct?
As far as I know, the current CM13 needs LP bootloader installed.
I have no issue with LP bootloader.
lentm said:
You had the official MM installed from Samsung, correct?
As far as I know, the current CM13 needs LP bootloader installed.
I have no issue with LP bootloader.
Click to expand...
Click to collapse
Yeah that was exactly the issue. Reflashed 5.0 then made the jump and it worked perfectly. So much wasted time...
---------- Post added at 05:28 AM ---------- Previous post was at 05:25 AM ----------
e-j said:
Would boot loop on the latest firmware for me as well; had to Odin back to OK4.
Click to expand...
Click to collapse
Yeah reflashing lollipop then installing cm13 did the trick.
Does this Rom fix Bluetooth issues?
Sent from my SM-G900P using XDA-Developers mobile app
has anyone got themes to work ine keeps crashing
manolze said:
has anyone got themes to work ine keeps crashing
Click to expand...
Click to collapse
Mine works fine with Puzzled UI - CM Theme from Play Store on 5/20 build.
I have no working theme chooser on this releaese
xenokc said:
Works great!
Is there a version of SuperSU that works with CM13? All trash the ROM and have to do full restore.
Click to expand...
Click to collapse
no need just go into developer and turn on root access
---------- Post added at 03:28 PM ---------- Previous post was at 03:24 PM ----------
anyone have a solution to theme chooser yet? i have already fixed phone dial problem and time out of sync problem
xpm69420 said:
no need just go into developer and turn on root access
---------- Post added at 03:28 PM ---------- Previous post was at 03:24 PM ----------
anyone have a solution to theme chooser yet? i have already fixed phone dial problem and time out of sync problem
Click to expand...
Click to collapse
Theme chooser works great for me, not having any issues with it. I am having an issue with the time being or of sync when set to automatic... How'd you fix it? Also, what's wrong with the dialer... can't say I'm having any issues there either.
unclejuju said:
Does this Rom fix Bluetooth issues?
Sent from my SM-G900P using XDA-Developers mobile app
Click to expand...
Click to collapse
I little late here, but CM 13.0 did NOT fix the S5 bluetooth issues. Still have the skipping and studdering.
I have a M9, for all intents new, was ATT, already unlocked, s-off'd TWRPd, and tried to flash the latest Lineage. It was a no go. Using himaul.
I did get Revolution HD running n it, but I wanted Lineage as it is what I was running n my M8.
I remember the process when they switched form CM to Lineage on my M8, is that you had to start with a base stable and then work your way through the nightlies if you had issues. But... I see as far back as the site goes, only nightlies.
So how does one fresh start a M9 that has never had Lineage before. (I even went to the directly listing whether the files are served, the oldest is still a nightly.)
I have tried removing the version asserts and it flashes, but then reboots right after the animation in a loop.
That is when I went to revolution just to get the phone back operational until I get a better solution.
I have been reading the helpful posts here for years, but first time I have ever not been able to just find a solution and therefor needed to ask.
Thanks for all the help over the years and hopefully in advance of this issue.
Appears solved
I updated the firmware to the latest OS, and it seems to have resolved the issue with the load, the latest nightly went in, and booted this time. I was on 1.32.509 went to 4.23.627. Not sure all is well yet, but lineage is in that is half the battle, will report back if issues.
Android Ice Cold Project
Disclaimer: I take no responsibility for bad things that happen as a result of flashing this.
[ROM]
Download Latest (credits to @c0urier)
(Note: need one more reboot after fresh install for data to work.)
[GAPPS]
Download
Clean installation is encouraged if come from different roms or android versions...
Thanks AICP team for the amazing ROM.
Special thanks to: @DerTeufel1980 , @sbrissen , @rogersb11 , @TheBr0ken , @DreamFX , @frankie, @Option58, @PoisonNinja...
XDA:DevDB Information
AICP, ROM for the Verizon Samsung Galaxy Note II
Contributors
wilson3q
Source Code: http://github.com/LineageOS/android_kernel_samsung_smdk4412
ROM OS Version: 2.3.x Gingerbread
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Created 2017-12-15
Last Updated 2017-12-15
Been running this for a couple days and it's doing well. I did not flash gapps. The biggest issue I have seems to be that apps will crash once the first time they try to access storage. I just reopen the app to do the same task and it works. Sometimes the MTP service crashes when I do something storage related, too. WiFi seems fine, but I haven't had a chance to use Bluetooth or make a call yet.
Thanks for this. Apparently the last ROM I was running on this particular device was a CM build of yours from early last year .
Adding this a couple days later: Wow, battery life has drastically improved over the old CM ROM.
100% Recommended
Just installed this to my Verizon Note 2 SCH-i605.
Running very stable and fast. Definitely better than any ROMS out there.
God bless you!
hi
how to apply it because i'm newer to install custom rooms
I'm having a real good time with this rom. Really brings this ol' girl back to life. I'm also having a real bad time with this rom.
Three issues I'm having so far:
1. Can't send a text. I can get texts in, but when I try to send one out will just say "sending" be then display a notification that it failed.
2. Phone screen turns off on calls and will not come on at all. Power button, home button, prox sensor, nothing gets the screen to come back on. This means I can't hang up and can't press 1 for English.
And 3. Caller ID isn't working at all.
I'm also getting a seemingly random popup saying MTP host failed, or something like that. Not sure if that is related
Any advice on what the problem could be would be splendid.
1. Which carrier to do you use?
2. What APN settings did you use?
This will be easy fix~I have no problems with my rom at the moment.
Dopeskwyd said:
I'm having a real goo1d time with this rom. Really brings this ol' girl back to life. I'm also having a real bad time with this rom.
Three issues I'm having so far:
1. Can't send a text. I can get texts in, but when I try to send one out will just say "sending" be then display a notification that it failed.
2. Phone screen turns off on calls and will not come on at all. Power button, home button, prox sensor, nothing gets the screen to come back on. This means I can't hang up and can't press 1 for English.
And 3. Caller ID isn't working at all.
I'm also getting a seemingly random popup saying MTP host failed, or something like that. Not sure if that is related
Any advice on what the problem could be would be splendid.
Click to expand...
Click to collapse
sideyh said:
Just installed this to my Verizon Note 2 SCH-i605.
Running very stable and fast. Definitely better than any ROMS out there.
God bless you!
Click to expand...
Click to collapse
verizon note 2 on build ND7?
sideyh said:
1. Which carrier to do you use?
2. What APN settings did you use?
This will be easy fix~I have no problems with my rom at the moment.
Click to expand...
Click to collapse
1. The big red V
2. No idea. Just however it came by default. Been on another rom for a few weeks now. If I remember correctly I did go into the *#*#4636*#*# menu and reset VZW's smsc number, but was dismayed like a mofo that it was of no use.
Would love to get this rom running solid, but the screen going black on a call is a major killjoy.
Update:
Loaded this rom again, still no go on the texts. Tried to restore APNs from a backup and got a pop-up saying this version of Android doesn't allow modifying of apn info.
Most of the entries for all four apn options say "not set"
I can't get it to save my APN. It's the country code. It will not let you have 311 it only let's you use APNs that have a 310 country code. I can't even edit it directly and use the 311 country code.
Any idea how I can get around this.? I've seen this in other ROMs before some ROMs just won't work on virtual carriers. And some don't have an problems with the 311 code.
---------- Post added at 04:20 AM ---------- Previous post was at 04:13 AM ----------
Dopeskwyd said:
I'm having a real good time with this rom. Really brings this ol' girl back to life. I'm also having a real bad time with this rom.
Three issues I'm having so far:
1. Can't send a text. I can get texts in, but when I try to send one out will just say "sending" be then display a notification that it failed.
2. Phone screen turns off on calls and will not come on at all. Power button, home button, prox sensor, nothing gets the screen to come back on. This means I can't hang up and can't press 1 for English.
And 3. Caller ID isn't working at all.
I'm also getting a seemingly random popup saying MTP host failed, or something like that. Not sure if that is related
Any advice on what the problem could be would be splendid.
Click to expand...
Click to collapse
Read this. I think you might be needing the base band and build up dates that these guys are talking about and linking to.
https://forum.xda-developers.com/note-2-verizon/development/mj9-radio-t3285280
Already on the mj9. pushed the md7 radio, reflashed the rom, no change. going back to beans 4.1.
Is there anyway I can unlock the ND7 bootloader for this device or is that completely hopeless?
swift5645 said:
Is there anyway I can unlock the ND7 bootloader for this device or is that completely hopeless?
Click to expand...
Click to collapse
Once updated, it is hopeless
stays stuck on aicp logo after flash. wth?
jerryspring said:
stays stuck on aicp logo after flash. wth?
Click to expand...
Click to collapse
the reason is because you swiped after reset.
you should not install any rooting after flashing.
flashing -> reboot WITHOUT rooting option
you shall be fine
sideyh said:
the reason is because you swiped after reset.
you should not install any rooting after flashing.
flashing -> reboot WITHOUT rooting option
you shall be fine
Click to expand...
Click to collapse
I did that. Still same outcome
um..yeah.. ok.. how do you even know what i did after flashing rom? i flashed rom, and rebooted...i have flashed supersu then rom and rebooted, i have tried all ways to flash the rom. keeps on aicp logo animation. i went and flashed stock rom, reunlocked the bootloader and flashed rom again. still doing same. wth? Flashed and waited 3 hours. Something is wrong with this phone.
I know because i made same mistakes and installed same thing multiple times until i figured it out.
If you see AICP logo, you are 99% there.
Did you install Gapp?
sideyh said:
I know because i made same mistakes and installed same thing multiple times until i figured it out.
If you see AICP logo, you are 99% there.
Did you install Gapp?
Click to expand...
Click to collapse
Nothing is writing to partitions... I can't even paste zips onto my phone from my PC. Internal storage on PC shows it's -1046870900. WTH?
---------- Post added at 12:17 PM ---------- Previous post was at 12:15 PM ----------
sideyh said:
Once updated, it is hopeless
Click to expand...
Click to collapse
No it's not. Flash ramc3 firmware
jerryspring said:
Nothing is writing to partitions... I can't even paste zips onto my phone from my PC. Internal storage on PC shows it's -1046870900. WTH?
---------- Post added at 12:17 PM ---------- Previous post was at 12:15 PM ----------
No it's not. Flash ramc3 firmware
Click to expand...
Click to collapse
Use your external micro SD Card for installation.
You don't need to paste ZIP files onto your internal phone from the beginning...Gapp and ZIP files must be stored in microSD Card first.
Hello! I need some help, I installed the newest Fulmics on my G5, amd now my bluetooth does not work. Whenver I switch it on, it immediately crashes. I really need it to work, as I use BT headsets to take calls and need it to connwct to my car as well. Please help!
Vevovaro said:
Hello! I need some help, I installed the newest Fulmics on my G5, amd now my bluetooth does not work. Whenver I switch it on, it immediately crashes. I really need it to work, as I use BT headsets to take calls and need it to connwct to my car as well. Please help!
Click to expand...
Click to collapse
Latest version of Fulmics was released at the end of December 2017... It's probably the most stable ROM on this page. If your Bluetooth is not functioning why not post there?
However it's very unlikely that it had anything to do with the ROM itself. But something else you flashed... Another mod, or perhaps you are coming from an aosp based ROM and didn't properly wipe before flashing. Or maybe it's somehow not flashing correctly with the latest (or older) version of TWRP. It maybe you coming from a newer version of stock...
Fulmics 5.5 having Bluetooth issues would have been mentioned and repaired long ago if this were a widespread issue...
The point being the ROM is likely the last thing you need to troubleshoot in this case.