need help with sm-n9100 china model - Android Q&A, Help & Troubleshooting

Hello
i have a phone with the following specs :
model number : sm-n9100 (china model)
android version : 4.4.4
based version : N9100ZCU1ANIG
kernel version : 3.10.0-2828982
build number : KTU84P.N9100ZCU1ANIF
custom build version : KTU84P1107
hardware : mt6572 / 8 core / 3 ghz
gpu : adreno 330
the problem is in games, always when i open a game it crash after 1 min then this 1 min decreases each time i start the game again until the game crash just after it open (after opening the game 4-5 times) then i have to restart my phone to go back for a full 1 min .
note:
1- i didnt change anything in my phone (frimware , rom , .... etc ) because i dont know about this
2- my phone is rooted.
i need help to solve this problem please
thnx in advance

Related

In need of ROM , MT6589 GT-I9190 (Samsung S4 mini - high copy)

Hi This is my phone's information
512 Ram
almost 700 mb (I dont recall) System memory
Hardware : MT6589
Model : GT-I9190
Build number : I9190XXUAMDF
Build date : 2013 nov
Android v : 4.2.2
pleas if u have one like thise backup rom and up for me
tnx
any one help me
no body here to help me ?

Samsung A9 Pro 2016 MT6580 need rom please help

Samsung A9 Pro 2016 MT6580
MT6580__alps__best6580_weg_l__best6580_weg_l__5.1_ _ALPS.L1.MP6.V2.19_BEST6580.WEG.L
Device Brand : alps
Device Model : best6580_weg_l
Device CPU : MT6580
Device IntName : full_best6580_weg_l
Device Version : 5.1
Device Compile : 6/3/2016 4:19:39 AM
Device Project : ALPS.L1.MP6.V2.19_BEST6580.WEG.L
Device ExtInfo : best6580_weg_l
this phone is virus sexy auto load any app
I root it to go to del virus but phone still boot in recovery mode now
please send me full rom
thankyou very much

Upgrade an rk3168 tablet, from 4.2.2 to a better rom, or how to backup rom??

Happy new year, in the first place!
Maybe i posted this in the wrong thread, due to my questions, i will try here..
I thought after reading and reading on inet...Gone try here to get a little bit further with a simple but brand new tablet i got from my mother.
That's also the reason why i don't throw it away, i thought lets see if there is a possibility to make it run better then with the stockrom.
And if there is no solution to flash it, what is the best way to backup the rockchip 3168 with 4.2.2 rom off the tablet itself?
Also to try other roms, i don't wane lose my bootloader etc.
Its a new tablet, but the hardware is older and because of that i thought lets see if i can get it maybe a little bit upgraded on the software side.
And if not, maybe another solution.
Therefore i searched a lot, but has anyone....Anyone maybe a direction to look for a maybe better rom.Also with cwm there is nothing what works with this chip, everything based on the maligpu400 or maybe also with the powerVr Sgx 540?
Other solution would be to backup the rom, and clean afterwards the stock rom.But i got stuck in how and what is the best way to do that.
I cant install Cwm recovery, when it installs it doesn't continue.
I also read that people lost their original bootloader, and because i cant find the stockrom online...What would be the best way to do that, i saw the app mtk, and the Rockchip tool but that seemed a lot off work and if i mess up my backup would never work.
Or is it the only way to back up this rom from Rockchip, a full backup kerel, loader etc..
And to try out a rom, install from sd card, and to get back on the stockrom a factory reset is all, or mess i up the recovery installing another rom?
If more info is needed about the chips, let me know.
Thanks ahead!
I will put the specs down here:
- System info droid -
Summery :
Brand name: Empire Electronix (Manufacture :Rockchip)
Device : Rockchip M1002B
Android :4.2.2
Processor : RK30board-ARMv7 Processor rev 0 (v7l)
Cpu Max Freq : 1200 Mhz
Cores : 2
System Ram : 1.00GB (Some apps say 1500mb)
Audio Chipset : Rk30sdk
Internal Storage : 1008Mb(132 mb free)
Internal SD : 8gb
GPU : Imagination Technologies PowerVR SGX 540
Display Size : 10.1inch - 1024x600Resolution
Screen Density : 90 ppi (160dpi)
Refresh Rate : 82.34 Hz
Back Camera : 1.9 MP(some apps : 2Mp)
Front Camera : 0.3 Mp
System :
Model : M1002B
Manufacture : Rockchip
Android : 4.2.2
Api Level : 17
Kernel : 3.0.36+20131118....
Compilation : V1.01.JDQ39...
Processor :
Processor : Rk30board
Instructions sets : armeabi-v7a, armeabi
Max Freq : 1200Mhz
Gpu :
Model : PowerVr SGX 540 + Output (Mini Hdmi 1920x1080)
Vendor : ITechnologies
OpenGL Version : OpenGL ES 2.0
Advanced Info:
Viewport size : 2048 x 2048
Sensor :
Freescale Semiconductor
Power C : 0.2mA
Max Range : 39.24
Resolution : 0.15328126
Other chips plus board descriptions :
RK30Board
Rockchip616
S-ilead GSL3680
uP6636Q-PGK38L
Wifi lost number of the chip, was realtek with tv in it.Must make new picture to find out but seemed pretty standard wifi Bgn chip.
Buttons : 3 - Power-Volume up/down
Ports : Mini USB2 OTG - Mini Hdmi(DD-DD5.1) - HeadphoneJack - Mic - MiniSD Card slot-
Rooted.
Roberto.
Were you able to figure this out?
I will try it and let you know if I have any problems? Thanks a lot.

rom stock SH-7208

Hi
i would flash my old tablet with rom stock, but i not found there.
can you help me ?
antutu data :
Brand : ALPS
model : SH-7208
Board : N932
Material : mt6572
Android : 4.2.2
CPU : VFPv4,Neon (dual core ARMv7 Processor)
GPU : Mali-400 MP
thanks for your help

Wiko Ride 3, mt6762, $35 at Walmart on Boost Mobile

Anyone had any luck rooting this phone? I've had updates, so mtk-su didn't work when I tried it, but I'm anxious to know if it works on a clean factory install.
If you have any experience with this phone please share!
Thanks,
Karl
Also here's the device info:
Device Info 3.2.4 Date Created 2021-10-09 21:02:45 Device -------------------------------------------------------- Device Name : Wiko Ride 3
Model : Wiko U614AS
Manufacturer : TINNO
Device : U614AS
Board : U614AS
Hardware : mt6762
Brand : WIKO
Build Fingerprint : WIKO/U614AS/U614AS:11/RP1A.200720.011/1629894660:user/release-keys USB Host : Supported CPU --------------------------------------------------------
SoC : u614as (no) no
Processor : U614AS
CPU Architecture : 4 x 2.00 GHz 4 x 1.50 GHz Supported ABIs : arm64-v8a, armeabi-v7a, armeabi CPU Hardware : MT6762V/CA CPU Type : 64 Bit CPU Governor :
Cores : 8
CPU Frequency : 400 MHz - 2001 MHz GPU Renderer : PowerVR Rogue GE8320
GPU Vendor : Imagination Technologies
GPU Version : OpenGL ES 3.2 build [email protected]
Random Access Memory ------------------ Total : 2829.0MB Available : 765.0MB Used : 2024.0MB Used Percentage : 72% System Storage ------------------ Total : 1.58GB Available : 0.00GB Used : 1.58GB Used Percentage : 100% Internal Storage ------------------ Total : 23.45GB Available : 3.27GB Used : 20.17GB Used Percentage : 86% External Storage ------------------ Total : 29.79GB Available : 20.37GB Used : 9.43GB Used Percentage : 31% Camera -------------------------------------------------------- Camera - 0 ------------------ Position : Back Mega Pixels : 9.4 MP Resolution : 4160x1872 Focal Length : 3.519mm Camera - 1 ------------------ Position : Front Mega Pixels : 3.7 MP Resolution : 2560x1440 Focal Length : 2.25mm Camera - 2 ------------------ Position : Back Mega Pixels : 1.9 MP Resolution : 1600x1200 Focal Length : 1.928mm Camera - 3 ------------------ Position : Back Mega Pixels : 9.4 MP Resolution : 4160x1872 Focal Length : 3.54mm
did you get your boatloader unlocked ? i saw an ad for flashing wiko system software cant find the link, it would be great to have a dump or stock.zip
MT6765_Android_scatter
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
this needs to be edited..
try mtkclient on windows to unlock boatloader igot a dump made give me a reply thanks ed ?
I'll have to factory reset to get a stock dump for you, I might have time to pull it off tomorrow if you really need it, I've been wanting to try it anyway to see if mtk-su will work before any updates come through
And no, it says unrecognized command when I execute the flashing unlock command
i just have a tablet p.c so I couldn't get python and mtkclient to work for some reason, but after reading some more, nck-dongle and some other box dongle s offer the boatloader unlock. get the boot.img flash magisk - unlock boatloader for mt8762 ? right
mtk-su isn't going to work I tried it, it was patched after 2019 on most phones
those are 50 bucks and up, there's a slew of dongles on the market, theres a couple other no-box mtk boatloader unlock tools I'm looking for, if they don't work the phone is patched and won't unlock

Categories

Resources