Anyone had any luck rooting this phone? I've had updates, so mtk-su didn't work when I tried it, but I'm anxious to know if it works on a clean factory install.
If you have any experience with this phone please share!
Thanks,
Karl
Also here's the device info:
Device Info 3.2.4 Date Created 2021-10-09 21:02:45 Device -------------------------------------------------------- Device Name : Wiko Ride 3
Model : Wiko U614AS
Manufacturer : TINNO
Device : U614AS
Board : U614AS
Hardware : mt6762
Brand : WIKO
Build Fingerprint : WIKO/U614AS/U614AS:11/RP1A.200720.011/1629894660:user/release-keys USB Host : Supported CPU --------------------------------------------------------
SoC : u614as (no) no
Processor : U614AS
CPU Architecture : 4 x 2.00 GHz 4 x 1.50 GHz Supported ABIs : arm64-v8a, armeabi-v7a, armeabi CPU Hardware : MT6762V/CA CPU Type : 64 Bit CPU Governor :
Cores : 8
CPU Frequency : 400 MHz - 2001 MHz GPU Renderer : PowerVR Rogue GE8320
GPU Vendor : Imagination Technologies
GPU Version : OpenGL ES 3.2 build [email protected]
Random Access Memory ------------------ Total : 2829.0MB Available : 765.0MB Used : 2024.0MB Used Percentage : 72% System Storage ------------------ Total : 1.58GB Available : 0.00GB Used : 1.58GB Used Percentage : 100% Internal Storage ------------------ Total : 23.45GB Available : 3.27GB Used : 20.17GB Used Percentage : 86% External Storage ------------------ Total : 29.79GB Available : 20.37GB Used : 9.43GB Used Percentage : 31% Camera -------------------------------------------------------- Camera - 0 ------------------ Position : Back Mega Pixels : 9.4 MP Resolution : 4160x1872 Focal Length : 3.519mm Camera - 1 ------------------ Position : Front Mega Pixels : 3.7 MP Resolution : 2560x1440 Focal Length : 2.25mm Camera - 2 ------------------ Position : Back Mega Pixels : 1.9 MP Resolution : 1600x1200 Focal Length : 1.928mm Camera - 3 ------------------ Position : Back Mega Pixels : 9.4 MP Resolution : 4160x1872 Focal Length : 3.54mm
did you get your boatloader unlocked ? i saw an ad for flashing wiko system software cant find the link, it would be great to have a dump or stock.zip
MT6765_Android_scatter
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
this needs to be edited..
try mtkclient on windows to unlock boatloader igot a dump made give me a reply thanks ed ?
I'll have to factory reset to get a stock dump for you, I might have time to pull it off tomorrow if you really need it, I've been wanting to try it anyway to see if mtk-su will work before any updates come through
And no, it says unrecognized command when I execute the flashing unlock command
i just have a tablet p.c so I couldn't get python and mtkclient to work for some reason, but after reading some more, nck-dongle and some other box dongle s offer the boatloader unlock. get the boot.img flash magisk - unlock boatloader for mt8762 ? right
mtk-su isn't going to work I tried it, it was patched after 2019 on most phones
those are 50 bucks and up, there's a slew of dongles on the market, theres a couple other no-box mtk boatloader unlock tools I'm looking for, if they don't work the phone is patched and won't unlock
Related
Hi
I have a smart phone brand glx
But I can not root it
Information
cpu hardware : BCM21553 platform
cpu model : ARMv6 compatible processor rev5 – v6l
cpu frequency : 1005 MHZ
total ram : 163 MB
TOTAL ROM 198 MB
GPU vender : broadcom
GPU render : videoCore IV HW
GPU version : openGL ES-CM 1.1
Screen density : 160 DPI
back camera pixel : 3.14 mp
front camera pixel : 1.22 mp
OS : android 2.3.7
How do I root it?
Help
@@@______Sorry for bad [email protected]@@____
loveinfire said:
Hi
I have a smart phone brand glx
But I can not root it
Information
cpu hardware : BCM21553 platform
cpu model : ARMv6 compatible processor rev5 – v6l
cpu frequency : 1005 MHZ
total ram : 163 MB
TOTAL ROM 198 MB
GPU vender : broadcom
GPU render : videoCore IV HW
GPU version : openGL ES-CM 1.1
Screen density : 160 DPI
back camera pixel : 3.14 mp
front camera pixel : 1.22 mp
OS : android 2.3.7
How do I root it?
Help
@@@______Sorry for bad [email protected]@@____
Click to expand...
Click to collapse
Try to use Search Button, then ask.
I'm going to let you in on a secret. If you can create an xda account than you are smart enough to root that phone.
Sent from my GT-I9505G using xda app-developers app
Hello
i have a phone with the following specs :
model number : sm-n9100 (china model)
android version : 4.4.4
based version : N9100ZCU1ANIG
kernel version : 3.10.0-2828982
build number : KTU84P.N9100ZCU1ANIF
custom build version : KTU84P1107
hardware : mt6572 / 8 core / 3 ghz
gpu : adreno 330
the problem is in games, always when i open a game it crash after 1 min then this 1 min decreases each time i start the game again until the game crash just after it open (after opening the game 4-5 times) then i have to restart my phone to go back for a full 1 min .
note:
1- i didnt change anything in my phone (frimware , rom , .... etc ) because i dont know about this
2- my phone is rooted.
i need help to solve this problem please
thnx in advance
Happy new year, in the first place!
Maybe i posted this in the wrong thread, due to my questions, i will try here..
I thought after reading and reading on inet...Gone try here to get a little bit further with a simple but brand new tablet i got from my mother.
That's also the reason why i don't throw it away, i thought lets see if there is a possibility to make it run better then with the stockrom.
And if there is no solution to flash it, what is the best way to backup the rockchip 3168 with 4.2.2 rom off the tablet itself?
Also to try other roms, i don't wane lose my bootloader etc.
Its a new tablet, but the hardware is older and because of that i thought lets see if i can get it maybe a little bit upgraded on the software side.
And if not, maybe another solution.
Therefore i searched a lot, but has anyone....Anyone maybe a direction to look for a maybe better rom.Also with cwm there is nothing what works with this chip, everything based on the maligpu400 or maybe also with the powerVr Sgx 540?
Other solution would be to backup the rom, and clean afterwards the stock rom.But i got stuck in how and what is the best way to do that.
I cant install Cwm recovery, when it installs it doesn't continue.
I also read that people lost their original bootloader, and because i cant find the stockrom online...What would be the best way to do that, i saw the app mtk, and the Rockchip tool but that seemed a lot off work and if i mess up my backup would never work.
Or is it the only way to back up this rom from Rockchip, a full backup kerel, loader etc..
And to try out a rom, install from sd card, and to get back on the stockrom a factory reset is all, or mess i up the recovery installing another rom?
If more info is needed about the chips, let me know.
Thanks ahead!
I will put the specs down here:
- System info droid -
Summery :
Brand name: Empire Electronix (Manufacture :Rockchip)
Device : Rockchip M1002B
Android :4.2.2
Processor : RK30board-ARMv7 Processor rev 0 (v7l)
Cpu Max Freq : 1200 Mhz
Cores : 2
System Ram : 1.00GB (Some apps say 1500mb)
Audio Chipset : Rk30sdk
Internal Storage : 1008Mb(132 mb free)
Internal SD : 8gb
GPU : Imagination Technologies PowerVR SGX 540
Display Size : 10.1inch - 1024x600Resolution
Screen Density : 90 ppi (160dpi)
Refresh Rate : 82.34 Hz
Back Camera : 1.9 MP(some apps : 2Mp)
Front Camera : 0.3 Mp
System :
Model : M1002B
Manufacture : Rockchip
Android : 4.2.2
Api Level : 17
Kernel : 3.0.36+20131118....
Compilation : V1.01.JDQ39...
Processor :
Processor : Rk30board
Instructions sets : armeabi-v7a, armeabi
Max Freq : 1200Mhz
Gpu :
Model : PowerVr SGX 540 + Output (Mini Hdmi 1920x1080)
Vendor : ITechnologies
OpenGL Version : OpenGL ES 2.0
Advanced Info:
Viewport size : 2048 x 2048
Sensor :
Freescale Semiconductor
Power C : 0.2mA
Max Range : 39.24
Resolution : 0.15328126
Other chips plus board descriptions :
RK30Board
Rockchip616
S-ilead GSL3680
uP6636Q-PGK38L
Wifi lost number of the chip, was realtek with tv in it.Must make new picture to find out but seemed pretty standard wifi Bgn chip.
Buttons : 3 - Power-Volume up/down
Ports : Mini USB2 OTG - Mini Hdmi(DD-DD5.1) - HeadphoneJack - Mic - MiniSD Card slot-
Rooted.
Roberto.
Were you able to figure this out?
I will try it and let you know if I have any problems? Thanks a lot.
Hi, I trying to use a TWRP on my tablet Yestel to install root for install windows or linux, or, i don't found a rom for recovery mode.
My config :
Device :
Manufacturer : YESTEL
Model ID : X2
Android Version : 8.0
Kernel Version : 3.18.19
Battery Capacity : 8000 mAh
SoC (Processor) :
Architecture : ARM (armv7l)
SoC Model : MediaTek MT6753
SoC Family : 8x ARM Cortex-A7 @1,50 GHz
Frequency : 1500 MHz / Min: 604 MHz - Max: 1500 MHz
Main CPU Cores : 8 Cores / 8 Threads
Process : 28 nm
CPUID : 41.0.7.C07.3
Revision : R0P3
Features : HALF THUMB FASTMULT VFP EDSP NEON VFPV3 TLS VFPV4 IDIVA IDIVT VFPD32 LPAE EVTSTRM
Bogomips : 33.76 MIPS
Display (GPU / LCD) : SoC Manufacturer
ARM :
SoC Model : Mali-400 MP
OpenGL Ver. : 2.0
LCD Size : 7.2 inches / 18.3 cm
LCD Resolution : 1280 x 800 pixels
LCD Definition : 210 DPI
Memory :
RAM : 3007 MB (3 GB)
Flash : 28602 MB.
thanks
Anyone knows howto enter fastboot?
Looking for firmware and FRP bin....
Soldiaz said:
Anyone knows howto enter fastboot?
Click to expand...
Click to collapse
in platform-tools, shift + right click on empty space, select "Open PowerShell window here" (or cmd or terminal - depends on what type of window u have), if in powershell, write cmd before doing anything else.
Now follow these steps:
Connect the tablet to pc via cable
go to tablet settings
scroll down and click on System
go to Tablet info
scroll down and click "Build number" until the message "you are now a developer" appears
go back to System
click on Developer options
scroll down a bit until you see USB Debug
enable it
(If you want to unlock bootloader also enable OEM Unlocking)
now on your computer where the command prompt (or powershell or terminal) window is open, type
Code:
adb devices
, this will output a list of devices
(meanwhile on your tablet should appear a message that says something like "accept debug from this device?" click on "always accept from this device" them click on "yes" or "allow")
now your device should be recognised by your pc
Type in the console
Code:
adb reboot bootloader
, this will reboot the tablet into fastboot mode
wait for the tablet to enter into fastboot mode, you can confirm this if the screen is all black and if in the bottom left there's written
Code:
FASTBOOT mode...
.
All done!
if you want to unlock the bootloader, just type in
Code:
fastboot oem unlock
. !WARNING! THIS WILL ERASE EVERYTHING ON THE TABLET, BE SURE TO MAKE A COMPLETE BACKUP OF YOUR IMPORTANT DATA!
If you want to exit fastboot mode, just type in
Code:
fastboot reboot
, or simply press and hold the power button for like 7 or more seconds to do a forced restart
DISCLAIMER: I am not responsible for any damage, warranty loss, etc., if you brick your phone then it's not my problem
Soldiaz said:
Looking for firmware and FRP bin....
Click to expand...
Click to collapse
here is the full firmware of the Yestel X2 tablet:
Click me
Ha3kn1r said:
Hi, I trying to use a TWRP on my tablet Yestel to install root for install windows or linux, or, i don't found a rom for recovery mode.
My config :
Device :
Manufacturer : YESTEL
Model ID : X2
Android Version : 8.0
Kernel Version : 3.18.19
Battery Capacity : 8000 mAh
SoC (Processor) :
Architecture : ARM (armv7l)
SoC Model : MediaTek MT6753
SoC Family : 8x ARM Cortex-A7 @1,50 GHz
Frequency : 1500 MHz / Min: 604 MHz - Max: 1500 MHz
Main CPU Cores : 8 Cores / 8 Threads
Process : 28 nm
CPUID : 41.0.7.C07.3
Revision : R0P3
Features : HALF THUMB FASTMULT VFP EDSP NEON VFPV3 TLS VFPV4 IDIVA IDIVT VFPD32 LPAE EVTSTRM
Bogomips : 33.76 MIPS
Display (GPU / LCD) : SoC Manufacturer
ARM :
SoC Model : Mali-400 MP
OpenGL Ver. : 2.0
LCD Size : 7.2 inches / 18.3 cm
LCD Resolution : 1280 x 800 pixels
LCD Definition : 210 DPI
Memory :
RAM : 3007 MB (3 GB)
Flash : 28602 MB.
thanks
Click to expand...
Click to collapse
there is no official TWRP image for the tablet, and there's no unofficial image too, to my knowledge
Hello
I have this Honor 6a
Device
--------------------------------------------------------
Device Name : Honor 6A
Model : DLI-L22
Manufacturer : HUAWEI
Device : HWDLI-Q
Board : DLI-L22
Hardware : qcom
Brand : HONOR
Build Fingerprint : HONOR/DLI-L22/HWDLI-Q:7.0/HONORDLI-L22/C432B129:user/release-keys
USB Host : Supported
System
--------------------------------------------------------
Android Version : 7.0
Version Name : Nougat
Released Date : srpna 22, 2016
Code Name : Nougat
API Level : 24
Security Patch Level : 2018-08-01
Bootloader : unknown
Build Number : Delhi-L22C432B129
Baseband : MPSS.JO.2.0.c1.7-00006-8937_GENNS_PACK-2.97936.1.100110.1
Java VM : 2.1.0
Kernel : 3.18.31-gb19213b
Language : czech (cs_CZ)
OpenGL ES : 3.2
Root Access : Yes
SELinux : Enforcing
Treble : Not Supported
Seamless Updates : Not Supported
CPU
--------------------------------------------------------
Processor : ARMv7 Processor rev 4 (v7l)
CPU Architecture : 4 x 1,40 GHz
4 x 1,09 GHz
Supported ABIs : armeabi-v7a, armeabi
CPU Hardware : Qualcomm Technologies, Inc MSM8937
CPU Type : 32 Bit
CPU Governor : interactive
Cores : 8
CPU Frequency : 768 MHz - 1401 MHz
GPU Renderer : Adreno (TM) 505
GPU Vendor : Qualcomm
GPU Version : OpenGL ES-CM 1.1
The bootloader is locked and the unlock process is not available now (not unlock code).
Can somebody help with the root exploit to gain super su?
I tried Kingo Root, Framaroot, I386 root and many other expoits, but none work.
Thank for any tips.
Michal