Related
Does anybody charge their TyTN in car via a usb car charger. I use a usb car charger for different devices: Bluetooth headset, gps reciever...
I also used it to recharge my Blue Angel.
Unfortunately I can't charge the TyTN. Has anyone had the same issue?
The charger says that it can charge 1Ampere. The original home charger is also 1 Ampere, so I don't understand why it doesn't work.
Have tried it with two different usb car chargers and both have the same problem: It charges only if TyTN is turned off. When I switch it on then the red charging light turns off.
Lio said:
Does anybody charge their TyTN in car via a usb car charger. I use a usb car charger for different devices: Bluetooth headset, gps reciever...
I also used it to recharge my Blue Angel.
Unfortunately I can't charge the TyTN. Has anyone had the same issue?
The charger says that it can charge 1Ampere. The original home charger is also 1 Ampere, so I don't understand why it doesn't work.
Have tried it with two different usb car chargers and both have the same problem: It charges only if TyTN is turned off. When I switch it on then the red charging light turns off.
Click to expand...
Click to collapse
I had similar problems except I didn't need to swithc the pda. I saw the usb charge couldn't charge completly or it was very slow to charge if I had screen with light or TomTom running.
I solved using a diferent charger, that generates 220 volts. It has 140W and costs around 40 euro.
Do you have a link, a picture or a brand name to this product?
Lio said:
Does anybody charge their TyTN in car via a usb car charger. I use a usb car charger for different devices: Bluetooth headset, gps reciever...
I also used it to recharge my Blue Angel.
Unfortunately I can't charge the TyTN. Has anyone had the same issue?
The charger says that it can charge 1Ampere. The original home charger is also 1 Ampere, so I don't understand why it doesn't work.
Have tried it with two different usb car chargers and both have the same problem: It charges only if TyTN is turned off. When I switch it on then the red charging light turns off.
Click to expand...
Click to collapse
Same problem.
I was told by the dealer that it's a matter o cable (the pins in the cable)
the one sold with the device is fine just to sync and charge from pc, but can't charge through car adapter.
I'm bought a new cable (arriving next week): it's a double cable, one side for pc, other side for charging.
if it works, I'll post..
bye
I'm afraid to tell you that your new cable will not work. You were not well informed. I am sure that it is not a cable problem, but a charger problem. According to me the power output expressed in Amps (Ampere) is not strong enough even though it says that it's 1 Ampere as the mains charger. Those cheap chinese made chargers are not strong enough for the TyTN. That's why it charges when the TyTN is switched off but as soon as you switch it on, the power output from usb car charger is not enough.
Lio said:
I'm afraid to tell you that your new cable will not work. You were not well informed. I am sure that it is not a cable problem, but a charger problem. According to me the power output expressed in Amps (Ampere) is not strong enough even though it says that it's 1 Ampere as the mains charger. Those cheap chinese made chargers are not strong enough for the TyTN. That's why it charges when the TyTN is switched off but as soon as you switch it on, the power output from usb car charger is not enough.
Click to expand...
Click to collapse
mmhhh, I'll wait the new cable, hoping it works ;.)
the fact is that with original cable the car adapter doesn't charge even if the device is off..
same thing with a 220V usb adapter.
only the original kit seems to work..
I'll tell you in a few days
btw: both adapter are chinese ;-)
Nope, Lio is right on this one. The car charger simply doesn't supply enough juice to charge the TyTN. O2 Exec users have had this problem for ages.
I use the charger bought from the Orange shop for the spv c500. Works fine, if a little slowly.
There are strange things happening!
The USB cable should not enter in to the equation as USB is USB and the pins should be wired correctly.
Here is what I have found.
If charging in the car all is ok until the power is cut, then it only charges whilst off until the TYTN is soft reset. This looks to me like there is a software / powercontroller confilct. It is a little confusing but see the scenarios below;
Soft reset TYTN, leave it off. Plug in to cigarette charger, turn TYTN on/off all is fine.
Turn off TYTN and unplug, all is fine, plug back in (TYTN off) will still charge when TYTN on.
Turn TYTN on, unplug, will not charge whilst on anymore until soft reset but will charge whilst off.
This is the same if I turn the ignition to power the lightere socket.
However, another spanner in the works, if I pull out the charger even with the device off and re-insert it it stops charging until soft reset.
What seemd to work best was to do a soft reset whilst the unit is charging and powered on. After that I was able to unplug, plug in even when the unit was on, turn ignition off/on etc... It only reverted back to not charging when I removed the charger from the socket as it was charging.
These are my findings and I presume each charger will be different.
I presume whatever electronics are in the chargers also causes problems. I have tried 2 USB and one fully wired charger and it is the same with all. I know for a fact that at least 2 of them have overcharge circuitry built in but do not think the 3rd has, I also presume the TYTN also has so perhaps there is some conflict here also.
I do know that there are car chargers specifically for the TYTN so will try one of those and see if it solves the problem. (anyone tried one?)
Anyone with more ideas please let us know.
What seemd to work best was to do a soft reset whilst the unit is charging and powered on. After that I was able to unplug, plug in even when the unit was on, turn ignition off/on etc... It only reverted back to not charging when I removed the charger from the socket as it was charging.
Click to expand...
Click to collapse
Thank you for this tip. Now I can recharge in car thanks to u! :lol: I tried it and it works.
Great Lio,
Glad it worked. When you get a chance, could you pull out the chrger from the lighter socket as it is charging and let me know if it then stops charging again. I just want to see if the same happens to you as it did to me. It will work again once you soft reset whilst plugged in.
Thanks.
cieplowski said:
What seemd to work best was to do a soft reset whilst the unit is charging and powered on.
Click to expand...
Click to collapse
I believe this trick should go to FAQ.
A week ago I visited a lot of shops trying many mains-to-USB charges to no avail. I already had one for MP3 player that didn't work too.
After reading your post, I connected the original charger and SRed. Now that another charger works!
Can't imagine what's the reason but it really works.
cieplowski said:
could you pull out the chrger from the lighter socket as it is charging and let me know if it then stops charging again.
Click to expand...
Click to collapse
Yes, it does exactly like you've described.
Originally Posted by cieplowski
could you pull out the chrger from the lighter socket as it is charging and let me know if it then stops charging again.
Click to expand...
Click to collapse
Same here.
Is this a bug in the software ?
I found this : http://www.expansys.com/product.asp?code=138248
I think it should work fine, I am not sure.
"I found this : http://www.expansys.com/product.asp?code=138248"
Could you contact them and ask about its power rating and whether it is susceptible to the problem/bug?
here I am again.
finally I got the new cable and... surprise... IT WORKS
I used it without soft resetting the device and it worked
I tryed soft resetting the device and it worked
But the biggest surprise of all is that after using the new cable, also the old one started working ..
i guess there must have been a software bug that has gone (hope forever) away.
For those interested, the new cable is a double one: one side is usb, other two sides are charge connector and hotsync connector.
pix09 said:
here I am again.
finally I got the new cable and... surprise... IT WORKS
I used it without soft resetting the device and it worked
I tryed soft resetting the device and it worked
But the biggest surprise of all is that after using the new cable, also the old one started working ..
i guess there must have been a software bug that has gone (hope forever) away.
For those interested, the new cable is a double one: one side is usb, other two sides are charge connector and hotsync connector.
Click to expand...
Click to collapse
have you got a web link for this one you now have?
friend of mine has apparently got a tytn, I'll pick up a 1.2A USB / Car adapter this weekend and see what happens, hopefully the extra .2A should enable the tytn / exec to charge normally in a car.
Having had an exec for a while I will agree that most 12v/USB adapters struggle with the exec, but hopefully this will make the difference, if it works I will post the details of the company selling them (they are listed for the PSP)
I haven't had this trouble. Just got my new MDA Vario II and I've used it with my old MDA compact mains charger and the car USB charger and it works with no problems.
Tried it with the Vario II on and off and have a charging light on both.
So, bought the following cradle from DayDeal's ebay store:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=350284094212
The product description says the following:
* Custom-fitted Docking Cradle
* USB connection/charging cable
* AC power adapter
* Stylus
Now the issue is with the second line. What is NOT explained here is that the unit when plugged IN to a wall jack AND the sync charge cable is plugged in to your computer, the sync/charge cable gets no more power from the wall jack and wants to get it from ONLY the sync/charge USB cable. All of this leads to the unit being grossly undercharged and therefore, complains that there is not enough charge coming from the power source and that you need to shut down and therefore the whole idea of a wall charger is useless after this.
WHY would a sync/charge USB cable which by the way is physically attached to the unit and cannot be removed, while the wall jack plugs into a proprietary mini-USB cable. I know it's proprietary because I tried first to use the wall charging cable that came with my TP2 from Sprint.
So, I'd recommend not buying this cradle unless you want to do what I'm doing now, have a USB sync/charge cable dangling from the unit and NOT plugged into the computer, but instead only plug in the wall charger and sync and data transfer via USB which is what I was doing before except now, I have a cradle to do it in.
Not a good trade-off to me. I bought this specifically to be able to sync/charge FROM the cradle.
One last thing, don't think about using the cradle if you have a skin or a hard case on the phone. The connector is so flush with the back of the charging stand that if you try to put anything BUT the phone into the stand it can't connect.
EDIT: December 5, 2009:
Been in touch with the vendor. They are going to swap out this unit for another one. They say that the unit doesn't do this at their site and that this one may be defective. I'll gladly swap this one out for one that works as unstated or at least expected. I'll post when I've gotten the new unit if this is actually a defective first unit or if this is the actual way these units work. And, I'll also try this on multiple machines so that I know it's not just my home desktop.
Another bad cradle from ebay DELUXE CRADLE W/2nd Battery Slot FOR HTC TOUCH PRO 2
When AC plugged in and USB to PC the PC USB sucks the power so the phone charges slow or not at all. Also doenst seem safe for the USB to send the power back out to the PC from the cheapo AC plug in this cradle. When used as a standalone charger AC only it sometimes fails to charge, about a 50-50 success rate. Stay away from it.
That's good info. It is the exact cradle I bought, but i bought it just for charging. I have not used it for connecting to the PC yet, but i needed a cradle that had a slot for a battery in it too.
wpbear said:
Another bad cradle from ebay DELUXE CRADLE W/2nd Battery Slot FOR HTC TOUCH PRO 2
When AC plugged in and USB to PC the PC USB sucks the power so the phone charges slow or not at all. Also doenst seem safe for the USB to send the power back out to the PC from the cheapo AC plug in this cradle. When used as a standalone charger AC only it sometimes fails to charge, about a 50-50 success rate. Stay away from it.
Click to expand...
Click to collapse
That the one I have as well. I also have not use it for my computer.. All I really wanted was a cradle for my nightstand that had an additional battery charging slot as I also bought some of those $10 200mah batteries to try (have not received them yet)
dahauss said:
That the one I have as well. I also have not use it for my computer.. All I really wanted was a cradle for my nightstand that had an additional battery charging slot as I also bought some of those $10 200mah batteries to try (have not received them yet)
Click to expand...
Click to collapse
200mA or 2000mA? Got a link please? Sorry for off topic.
jonrobertd said:
200mA or 2000mA? Got a link please? Sorry for off topic.
Click to expand...
Click to collapse
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=390130739877
2000mah
I purchased this cradle and my complaint has to do with the USB cable that is attached to cradle. I need a long line to reach back of my PC. This attached one does not reach unless I want to view the phone from 5' away! Very disappointed. I've only had it a few days but didn't know this, sanjsrik:
What is NOT explained here is that the unit when plugged IN to a wall jack AND the sync charge cable is plugged in to your computer, the sync/charge cable gets no more power from the wall jack and wants to get it from ONLY the sync/charge USB cable."
Click to expand...
Click to collapse
It does seem slow to charge but I'll run a couple of tests to confirm.
C series serial number prime worked for three days now won't take a charge. Device will connect to pc or mac via cable, just won't take a charge. Any ideas for me?
askmattrix said:
C series serial number prime worked for three days now won't take a charge. Device will connect to pc or mac via cable, just won't take a charge. Any ideas for me?
Click to expand...
Click to collapse
there have been other threads about this. usually its the charger overheating and putting it in a ziplock in the freezer, resets it.
Mine did that too, just leave the charger and everything unplugged from the wall for a day. That fixed mine.
Sent from my ADR6425LVW using XDA Premium.
The other issue I've seen is poor contact in the USB socket on the wall adapter. I had to unplug the usb cable from the wall adapter. Then, look at the usb socket on the power adapter. The gold pins are the usb contacts. Directly opposite of them, there should be two silver prongs. I had to use a small flat blade screwdriver to pry both of them out a little further to ensure they did their job of firmly pushing the usb cable against the socket's usb contacts. Once I did, my TF201 was able to get charge from it, again.
If you decide to replace the wall charger, I believe Fry's and Office Depot stock the asus charger.
Same thing for me.. PC recognizes it as a media device, but will not charge with wall charger. Wall charger works with my HTC Phone, so it works.
I don't think it has anything to do with the latest update, since the Dock wont charge either, and there's no OS in that, right?
Just experienced this today. I have had it unplugged for about 10 hours now, we'll see if it charges.
I had the same issue few days after I got my prime. I connected my sgs to the charger and it worked. Then connected the prime and voila-works.
askmattrix said:
C series serial number prime worked for three days now won't take a charge. Device will connect to pc or mac via cable, just won't take a charge. Any ideas for me?
Click to expand...
Click to collapse
Which C model do you have? C1,2,3? Just asking.
Johnny0906 said:
Which C model do you have? C1,2,3? Just asking.
Click to expand...
Click to collapse
C1. There are some good suggestions here I need to try.
Wrap it in a towel and bang it against a table. That will fix it usually. Then get some pc heatsinks and some arctic silver adhesive and you can attach them to the charger to keep it from happening again.
The plug has two options, 5V (standard for USB?) and 15V. I used the plug on my old HTC phone (Ozone) and then plugged it back into my Prime and it worked. Thanks for the great tips guys.
Since the charger works in two modes, I wonder if some charges became confused and started dishing out 5V when they should be dishing out 15V. Thoughts?
G37 said:
The plug has two options, 5V (standard for USB?) and 15V. I used the plug on my old HTC phone (Ozone) and then plugged it back into my Prime and it worked. Thanks for the great tips guys.
Since the charger works in two modes, I wonder if some charges became confused and started dishing out 5V when they should be dishing out 15V. Thoughts?
Click to expand...
Click to collapse
Hi, I got the same problem. The charger indeed seems to be stuck in the 5V mode, since, when plugged in the tablet does get charged, even though it is not indicated, but very slowly. It is charging as if it is plugged in to a pc.
I tried plugging it into (old) phones, but I still can't seem to get it to switch back to the 15V mode.
The freezer didn't help either.
Any other suggestions?
I waited about 4-5 hours before plugging into my old phone. My other suggestion is to allow the phone to charge for a short bit (30 minutes) unplug and wait, then plug into your Prime.
I have a feeling that its a transistor toggle that isn't flipping at the correct voltage.
I've had the same problem yesterday. In my case the problem was with the charge socket on the keyboard itself. Some copper pins were deformed and that stopped the device charging. I took a magnifying glass(also for checking if any of the copper pins are bend) and a small tool to bend them back. After this it charged again. Hope this helps.
My charger suddenly stopped working from today. The Prime is detecting the connection as the screen turns ON but it is not charging. I charged my sensation using the same adapter and USB cable and it is working fine. Why can I not charge Prime via PC like phone? Is it possible? I am in India and not sure if the power adapter is easily available as Prime is not yet launched in India.
Kindly suggest.
Thanks in advance.
Hi,
I've started to have this problem today, plug it in and it does come up with the charge icon but it doesn't charge - or doesn't seem to.
However I left it connected last night from midnight until 8am this morning and it went from 13% to 17% so it is charging VERY VERY slowly although the unit doesn't actual seem to think it is.
I have it plugged in to my phone right now and its working perfectly, I borrowed the charger to my g/f last night to charge her iphone and i'm thinking this might have done something to flip the voltage as since then it isn't working.
Anyone have any ideas on this??
Kevin
thornd7 said:
The other issue I've seen is poor contact in the USB socket on the wall adapter. I had to unplug the usb cable from the wall adapter. Then, look at the usb socket on the power adapter. The gold pins are the usb contacts. Directly opposite of them, there should be two silver prongs. I had to use a small flat blade screwdriver to pry both of them out a little further to ensure they did their job of firmly pushing the usb cable against the socket's usb contacts. Once I did, my TF201 was able to get charge from it, again.
If you decide to replace the wall charger, I believe Fry's and Office Depot stock the asus charger.
Click to expand...
Click to collapse
I had this problem a couple of weeks ago and completed the same as above works well
Gilbo12 said:
I had this problem a couple of weeks ago and completed the same as above works well
Click to expand...
Click to collapse
But if the charger works fine when charging a phone it cant be the connection at fault..
It does seem to me that the power it is outputting has dropped especially the I managed to gain 5% over the course of a night where WIFI was off and screen was off even though the charge icon doesn't come up.
Is there a way of forcing the charger back in to 12v mode??
damnit... I had the same problems a few days ago and I thought it was in the cable instead of the charger... not realising the charger has to put out 15v instead of 5v.
Does this mean the Transformer won't charge with for example, my HTC charger?
I totally messed up my cable, because I thought it was broken... when I opened up the USB plug, I noticed the yellow wire was not connected anymore, but this didn't solve anything. Eventually I messed up the cable that bad, that I've ordered a new one from ebay... but when I read this... I should have just banged the charger a few times... shait.
funfair said:
damnit... I had the same problems a few days ago and I thought it was in the cable instead of the charger... not realising the charger has to put out 15v instead of 5v.
Does this mean the Transformer won't charge with for example, my HTC charger?
I totally messed up my cable, because I thought it was broken... when I opened up the USB plug, I noticed the yellow wire was not connected anymore, but this didn't solve anything. Eventually I messed up the cable that bad, that I've ordered a new one from ebay... but when I read this... I should have just banged the charger a few times... shait.
Click to expand...
Click to collapse
Has anyone actually ever managed to fix this problem? I've just contacted ASUS about it to see what they say - hopefully they'll ship me out a new charger plug or something, what a useless charger!!
I am xperia z2 user since july 2014.
Until tooday everything was fine.
Onw hour ago i started playing Angry birds epic, and phone got really warm.
After few minutes i noticed that i have low level of battery, so i puted it on magnetic charger, and...nothing. It didnt start to charge. So i connected USB plug and also no reaction.
Phone is working except that it is not charging , and even in a basic menu it gets warmer then usual.
Any ideas??
Soft reset it. Hold volume up + power until3 vibrations
Or let it cool down first
mariosraptor said:
Soft reset it. Hold volume up + power until3 vibrations
Click to expand...
Click to collapse
I tried this way and it does not work.
I have z2 with same problem but I solved it
I have z2 with same problem it started with me after I bought the magnetic cable charger since then and the usb cable keeps bilnking on and off and the battery drain instead of charge and I can onlycharge the mobile using the magnetic cable..... I read here that the cause of the problem could be connecting the magnetic cable upside down and I did it by mistake and then the usb problem started so to solve my problem i connected the magnetic cable upside down once again and then connected the usb cable and its working but if I used the magnetic cable again the problem come back to raise so I do the same by connecting the magnetic cable in a invert way.
Mostafa_Voldo said:
I have z2 with same problem it started with me after I bought the magnetic cable charger since then and the usb cable keeps bilnking on and off and the battery drain instead of charge and I can onlycharge the mobile using the magnetic cable..... I read here that the cause of the problem could be connecting the magnetic cable upside down and I did it by mistake and then the usb problem started so to solve my problem i connected the magnetic cable upside down once again and then connected the usb cable and its working but if I used the magnetic cable again the problem come back to raise so I do the same by connecting the magnetic cable in a invert way.
Click to expand...
Click to collapse
Hi, i probably have the same issue. Have you connected both cables at the same time to solve it?
I've got this http://uae.souq.com/ae-en/z3-titanium-magnetic-charging-cable-with-smart-led-color-change-indicator-for-sony-xperia-black-7770328/i/#Reviews cable a few days ago. And It was charging fine as it should. But today I did something stupid/funny. I've connected the cable opposite side, display was off when I connected it. But after that when I was trying to turn on my device display, I realized it's not turning on. When I connected it to stock charger/wall charger. It was blinking yellow and after a minute it was blinking red. And got damn my device doesn't want to turn on :laugh: Tried to hard reset, still nope. Then I've removed all cards(sim/sd) and connected the device to my pc and boom! it turned on. Thanks to God! :silly: After that I tried to reconnect the magnet cable in right direction XD. And now the device indicator is blinking yellow(Charging on/off) And also when I connect the magnet charger do the device without connecting it to any usb slot, It lights blue. The thing is the cable is not charging my device like it should after connecting it in opposite direction for a few second.
Now my question is : The cable is dead or my device magnet port got screwed?
rakeshbro said:
I've got this http://uae.souq.com/ae-en/z3-titanium-magnetic-charging-cable-with-smart-led-color-change-indicator-for-sony-xperia-black-7770328/i/#Reviews cable a few days ago. And It was charging fine as it should. But today I did something stupid/funny. I've connected the cable opposite side, display was off when I connected it. But after that when I was trying to turn on my device display, I realized it's not turning on. When I connected it to stock charger/wall charger. It was blinking yellow and after a minute it was blinking red. And got damn my device doesn't want to turn on :laugh: Tried to hard reset, still nope. Then I've removed all cards(sim/sd) and connected the device to my pc and boom! it turned on. Thanks to God! :silly: After that I tried to reconnect the magnet cable in right direction XD. And now the device indicator is blinking yellow(Charging on/off) And also when I connect the magnet charger do the device without connecting it to any usb slot, It lights blue. The thing is the cable is not charging my device like it should after connecting it in opposite direction for a few second.
Now my question is : The cable is dead or my device magnet port got screwed?
Click to expand...
Click to collapse
If you inversely connect it to your phone, the cable instantly become a magnetic port killer and so your magnetic port is killed in this incident.
iXaidyiu said:
If you inversely connect it to your phone, the cable instantly become a magnetic port killer and so your magnetic port is killed in this incident.
Click to expand...
Click to collapse
F**k. Shouldn't have connect it :laugh: But I'm happy that Device booted without dissembling the device. F##k Magnet charger/cable XD
rakeshbro said:
F**k. Shouldn't have connect it :laugh: But I'm happy that Device booted without dissembling the device. F##k Magnet charger/cable XD
Click to expand...
Click to collapse
Should have brought the WSKEN Mag Charger
I once tried connecting the opposite way the charger would just turn off because of some safety feature. Did that three or four times.
Cable and phone works fine also the cable is well-built.
You can get it for the same price from AliExpress and it delivers to UAE as well.
MJ999 said:
Should have brought the WSKEN Mag Charger
I once tried connecting the opposite way the charger would just turn off because of some safety feature. Did that three or four times.
Cable and phone works fine also the cable is well-built.
You can get it for the same price from AliExpress and it delivers to UAE as well.
Click to expand...
Click to collapse
Your device magnet charger still working? I think mine went dead or have to buy another to test if the magnet port is dead or not!(The led on the magnet charger,lights up blue when I connect it to device wihout any power source:laugh However I don't live in UAE I just imported it from dubai. Howerver after this incident, I'm not going to use another magnet charger
And also my device is not full charging now, Stuck at 95% and flashing green led (goes on/off)
F**K
rakeshbro said:
I've got this http://uae.souq.com/ae-en/z3-titanium-magnetic-charging-cable-with-smart-led-color-change-indicator-for-sony-xperia-black-7770328/i/#Reviews cable a few days ago. And It was charging fine as it should. But today I did something stupid/funny. I've connected the cable opposite side, display was off when I connected it. But after that when I was trying to turn on my device display, I realized it's not turning on. When I connected it to stock charger/wall charger. It was blinking yellow and after a minute it was blinking red. And got damn my device doesn't want to turn on :laugh: Tried to hard reset, still nope. Then I've removed all cards(sim/sd) and connected the device to my pc and boom! it turned on. Thanks to God! :silly: After that I tried to reconnect the magnet cable in right direction XD. And now the device indicator is blinking yellow(Charging on/off) And also when I connect the magnet charger do the device without connecting it to any usb slot, It lights blue. The thing is the cable is not charging my device like it should after connecting it in opposite direction for a few second.
Now my question is : The cable is dead or my device magnet port got screwed?
Click to expand...
Click to collapse
I did the same thing a long time ago with the same cable you have but when i did it nothing happened. I have the same cable that you have for almost a year now everything is working fine except when its charging the indicator light on cable is blinking randomly red or blue but it's charging fine.I tried other magnetic charging cables with light indicators they are working fine without blinking.
Coltstraik said:
I did the same thing a long time ago with the same cable you have but when i did it nothing happened. I have the same cable that you have for almost a year now everything is working fine except when its charging the indicator light on cable is blinking randomly red or blue but it's charging fine.I tried other magnetic charging cables with light indicators they are working fine without blinking.
Click to expand...
Click to collapse
You are lucky then. And now I'm having charging issue. Device display goes on while charging with usb charger and doesn't turn off automatically! :crying:
Btw does your magnetic cable lights up if you connect it to device without any power source?
rakeshbro said:
You are lucky then. And now I'm having charging issue. Device display goes on while charging with usb charger and doesn't turn off automatically! :crying:
Btw does your magnetic cable lights up if you connect it to device without any power source?
Click to expand...
Click to collapse
Nope i just tried that nothing happens. My cable only lights up when i connect it to a power source.
Coltstraik said:
Nope i just tried that nothing happens. My cable only lights up when i connect it to a power source.
Click to expand...
Click to collapse
Well mine lights up blue just by connecting it to device and without any power source from any usb device. I think it happend right after connecting it in wrong direction.:cyclops:
rakeshbro said:
Your device magnet charger still working? I think mine went dead or have to buy another to test if the magnet port is dead or not!(The led on the magnet charger,lights up blue when I connect it to device wihout any power source:laugh However I don't live in UAE I just imported it from dubai. Howerver after this incident, I'm not going to use another magnet charger
And also my device is not full charging now, Stuck at 95% and flashing green led (goes on/off)
F**K
Click to expand...
Click to collapse
Yes both the magnet charger and the device is working fine.
Can show you a video if you want on what happens if you connect the opposite way.
MJ999 said:
Yes both the magnet charger and the device is working fine.
Can show you a video if you want on what happens if you connect the opposite way.
Click to expand...
Click to collapse
I know now :laugh:
Don't know if, I've to replace magnetic flex cable to fix (battery not charging after 96-97% and device goes on/off when battery is charged with green indicator on/off as well)
I also did a fully discharge on my device today and charged it when device was off. And it charged to 100% now time to see if it can charge back to 100% when the device is on. (But device still goes on/off with green indicator on/off. When device is charged)
I read somewhere in this community that downgrade to kk solve problem.
Sent from my D6503 using XDA-Developers Legacy app
Update :
Looks like battery or device mb screwed!! Battery won't charge after 96-97-98% and display goes on/off on/off when it reach 96-97-98% and after that green indicator + charging indicator goes on/off as well.
Not going to touch magnetic charging cable anymore XD