Welcome to the Afaneh ROM
Disclaimer1: Your warranty is now void!
I am not responsible if you brick your phone. or kill your sd card!
I cannot be held responsible for smoke, fire, water, or other natural disasters.
So please READ the entire OP!
Disclaimer2: Always make a backup first!! Flash at your own risk!
Clean install is always recommended, but at minimum make sure you wipe!
ROM FEATURES
Based on I9505XXUHPA1.
Fully De-odexed.
Rooted.
De-Knoxed.
BusyBox.
Latest ZipAling.
Semi debloated.
CSC Tweaks
Free Tether Mod.
Multi languages support.
And more you will notice.
How to get rid of kingroot
here
Instructions to Install this Rom:
FlashFire install instructions:
Coming from 4.4.2 or Below
- Open FlashFire.
- Press the "+" button and select Wipe (Select System Data, 3rd Party Apps, Dalvik and Cache)
- Press the "+" button and select "Flash ZIP or OTA"
- Add Afaneh_ROM_VX.XX.zip
- Add OC1_firmware.zip
- Add OC1 SS/FF Flashable Kernel.zip
- Leave "Auto-Mount" unchecked and make sure EverRoot is disabled
- Make sure the order is Wipe, ROM, Kernel(OF1 users only) then press FLASH then OK.
- Phone will reboot, wait that it complete the first boot It takes around 5 minutes!
Coming from OC1/OF1:
- Open FlashFire.
- Press the "+" button and select Wipe (Select System Data, 3rd Party Apps, Dalvik and Cache)
- Press the "+" button and select "Flash ZIP or OTA"
- Add Afaneh_ROM_VX.XX.zip
- Add S4_VZW_OF1_Flashable_Kernel.zip only if you are on OF1 bootloader.
- Leave "Auto-Mount" unchecked and make sure EverRoot is disabled
- Make sure the order is Wipe, ROM, Kernel(OF1 users only) then press FLASH then OK.
- Phone will reboot, wait that it complete the first boot It takes around 5 minutes!
SafeStrap install instructions:
Coming from 4.4.2 or Below
- Boot into SS
- Flash Afaneh_ROM_VX.XX.zip
- Flash OC1_firmware.zip
- Flash OC1 SS/FF Flashable Kernel.zip
- Reboot system.
- wait that it complete the first boot It takes around 5 minutes!
Make sure that Kernel is last thing you flash.
Coming from any OC1/OF1
- Use NC5Flasher to flash the NC5 Kernel and reboot. This will boot you straight into SS.
- Flash Afaneh_ROM_VX.XX.zip
- Flash OC1 SS/FF Flashable Kernel.zip
- Reboot system.
- wait that it complete the first boot It takes around 5 minutes!
MDK Install Instructions:
Must be on OC1 Modem
skip MDK kernel flash will end with soft brick as ROM contain non Loki'd OC1 kernel
- Boot into TWRP Recovery or recovery of your choice
- Flash Afaneh_ROM_VX.XX.zip
- Flash any Loki'd MDK kernel like AIO kernel TW 5.0.1
- Reboot system.
- wait that it complete the first boot It takes around 5 minutes!
Bugs:
- 4G not working on v1.00
Downloads:
androidfilehost
Thanks to:
SuperR for kitchen
Chainfire For SuperSU.
Stericson For BusyBox.
Samsung for lollipop.
Verizon for locked bootloader.
me.
Change log:
[Mar 01, 2016] Afaneh ROM V1.00
Initial release with stock I9505XXUHPA1a lil bit modified.
Addons & Fixes
Proximity_Sensor_Fix_Afaneh_v1.00
Screen shots for v1.00
Screenshots? Or is it pretty much stock?
ATGkompressor said:
Screenshots? Or is it pretty much stock?
Click to expand...
Click to collapse
For now its stock but a lil different from stock verizon one.
Will be a good and stable base to start with.
Screen shot added to post #3
mohammad.afaneh said:
Change log:
[Mar 01, 2016] Afaneh ROM V1.00
Initial release with stock I9505XXUHPA1a lil bit modified.
Click to expand...
Click to collapse
Looks nice! I'm curious though. Why port a ATT Rom to a Verizon phone?
jwhistler said:
Looks nice! I'm curious though. Why port a ATT Rom to a Verizon phone?
Click to expand...
Click to collapse
This is not at&t ROM this is for I9505 the international LTE version of s4.
One reason is this ROM have the latest updates from samsung and libstagefright patch and more.
i accidentally flashed this on my i9505 and menu and back doesnt work anymore( i tried all stock fw..nothing
can u help ?
RazOne said:
i accidentally flashed this on my i9505 and menu and back doesnt work anymore( i tried all stock fw..nothing
can u help ?
Click to expand...
Click to collapse
This ROM has Verizon kernel may it break the menu and back keys for you, try flash I9505 5.0.1 kernel.
I this doesnt help flash full I9505XXUHPA1 via odin.
i reinstalled firmware;( no luck(
The rom is good. But where is a 4G? Is there 4G?
Seeeerggg said:
The rom is good. But where is a 4G? Is there 4G?
Click to expand...
Click to collapse
I have 4G sim but my career not puplished 4G yet I cant test now but the ROM based on I9505 the 4G version of s4.
Go to Settings > More Networks > Network Mode >Select LTE/CDMA option.
Tap OK and the device will apply the new settings and restart.
mohammad.afaneh said:
I have 4G sim but my career not puplished 4G yet I cant test now but the ROM based on I9505 the 4G version of s4.
Go to Settings > More Networks > Network Mode >Select LTE/CDMA option.
Tap OK and the device will apply the new settings and restart.
Click to expand...
Click to collapse
Unfortunately,it doesn't work.
Seeeerggg said:
Unfortunately,it doesn't work.
Click to expand...
Click to collapse
I will look into it soon.
I'm really liking this rom bro, I hope you keep it going. If it had all apps in multi window by default with the pop-up windows enabled it would be my dd for sure. ?
EarthquakeJake said:
I'm really liking this rom bro, I hope you keep it going. If it had all apps in multi window by default with the pop-up windows enabled it would be my dd for sure. ��
Click to expand...
Click to collapse
I will start working on this ROM soon.
In case of I dont have time I will upload every mod as flashable package.
Proximity_Sensor_Fix_Afaneh_v1.00
mohammad.afaneh said:
Proximity_Sensor_Fix_Afaneh_v1.00
Click to expand...
Click to collapse
Is there a problem with the proximity sensor? I hadn't noticed
EarthquakeJake said:
Is there a problem with the proximity sensor? I hadn't noticed
Click to expand...
Click to collapse
sometime it stuck so I used the libs from OC1.
Probably should include specific info on variant on kernel and 4 g problems in op to save members from troubles until you have a handle on bugs, I by no means am dissing your work just a friendly suggestion
Related
Evervolv 4.1.2, brought to you by Optima Team
What is Evervolv?
We are an AOSP port aimed at Snapdragon powered devices.
Our rom includes all the basics:
Extended PowerMenu
Battery %,
Volume button music control.
Trackball Wake
Theme manager
Unique additions include:
sixbar signal strength
lockscreen styles
However our biggest feature is the ability to turn all that off with one switch in the toolbox, giving you 100% aosp look and feel.
We also do eng builds (instead of userdebug like everyone else) providing more open experience (ie adb root by default) and full complement of commandline tools (busybox, vim, ssh, curl/wet with ssl support!)
Bugs :
Flipped recents screenshot (need help fixing this)
Everything else should be fine.
Download :
Evervolv 4.1.2 FINAL [v1]
Screenshot :
Click here !
Installation Instruction :
V10 BASEBAND ONLY !
1.) Download the ROM .zip
2.) Go to recovery
3.) Wipe data & cache
4.) Install ROM .zip (also install v10Baseband zip if you haven't)
5.) Reboot
Great work!
L5 version comes soon!!
Sent from my Moto G XT1033 using Tapatalk
WOWW ...
GREAT ! thank you !
how to install this rom?
manhkhangkkn said:
how to install this rom?
Click to expand...
Click to collapse
By CWM ,like all others Custom roms
full wipe highly recomended ,in theory ...
manhkhangkkn said:
how to install this rom?
Click to expand...
Click to collapse
Just normal way to install a ROM :
1.) Download
2.) Go to recovery
3.) Flash the ROM zip
4.) Flash v10 Baseband
5.) Wipe data & cache
6.) Reboot
F4uzan said:
Just normal way to install a ROM :
1.) Download
2.) Go to recovery
3.) Flash the ROM zip
4.) Flash v10 Baseband
5.) Wipe data & cache
6.) Reboot
Click to expand...
Click to collapse
I try it but the phone say com.phone.android stoped, systemUI too. I flash F4kernel or phenom kernel but still don't work
:crying:
manhkhangkkn said:
I try it but the phone say com.phone.android stoped, systemUI too. I flash F4kernel or phenom kernel but still don't work
:crying:
Click to expand...
Click to collapse
Weird, I never encountered an issue like this before. I'll address it and try to fix it.
where can i find the features of this rom and screenshots ? i don't find them on internet (interresting presentation) ...
Boom,the next great rom by TEAM-OPTIMA!!!!Great work
GREETZ FROM TEAM-OPTIMA!!!
[STOCK ROM][5.0] NKD Android L Odexed/DeOdexed
Important Note:
You have to flash the full NKD tar in odin before using this rom.
This won't run on the 4.4.4 bootloader, I've tried.
This stock rom is based on the TEST NKD leaked build.
Special thanks @garwynn
And the anonymous donor that contributed this release.
Also, @paco_1 & @sac23 - teamed up to come up with a proper bootable version.
Odexed Features:
- Init.d support
- Rooted/SuperSU
- Knox Removed
- Busybox
- SQLite
- Call block added
- Dialer shortcut in call logs
DeOdexed Features:
- 100% Deodexed Lollipop Rom
- Hotspot integrated and working
- Init.d support
- Rooted/SuperSU 2.42
- Knox Removed
- Busybox
- SQLite
- Call & msg blocking feature added
- Dialer shortcut in call logs
- Bootanimation support added
- Battery cover toast removed
- Call recording, active but only available from settings while in a call
- SecSettings all images converted from qmg to png's for theming
- Developer options enabled by default
- USB debugging enabled by default
- Application permissions menu item added to settings
- Animation scales defaulted to .5
- Signature verification check removed
- Added recent menu shortcut to pulldown statusbar
- Replaced stock Swype keyboard with Wicked Blue Swype with number row
- Added several apps that I like to use
Adaway (for ad removal)
Download All (manages downloads)
Disable Increasing Ringtone (by Shumoapp, I REALLY hate increasing ringtone and this app disables it)
Rom Toolbox Lite (for root browser and other awesome tools, doesn't show on first boot, restart once)
Quickboot (for boot to recovery and other options)
Downloads
Wipe and install the Full Tar first! See instructions below.
Odexed Download Link:
>> G900P_NKD.5.0.Odexed.Test_V3.zip <<
DeOdexed Download Link:
Important Note:
Initial boot takes a solid 10 minutes or more.
Flashing anything that requires optimizing apps (refreshing cache/dalvik cache) ups the (re)boot time to around 20 minutes.
>> G900P_NKD.5.0.De-Odexed.Ver1.0.zip <<
Instructions to Install full Tar File
You MUST be on the 5.0 bootloader to run this rom.
Full Tar Thread Link --> [ODIN][TAR][5.0][LEAK] SM-G900P NKD Test Build - Full Restore
• BACKUP INTERNAL SD before flashing the tar.
• The full tar wipes Data and internal SD.
• Extract (unzip) the firmware file:
• Download Odin v3.09 Recoveries & ODIN
• Extract Odin zip-file
• Power down the phone (or pull the battery, it is important to flash the OTA from a powered off state)
• Open Odin v3.09
• Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
• Connect phone and wait until you get a blue sign in Odin
• Add the firmware file to AP / PDA
• Make sure re-partition is NOT ticked
• Click the start button, sit back and wait a few minutes
Rom Installation:
- Install custom recovery with Odin. Recoveries & ODIN
The instructions for Odin above also apply to flashing a custom recovery.
- Reboot into recovery with Pwr/Home/Volume Up
- Full wipe
- Install rom with custom recovery
- OPTIONAL: Before rebooting, also flash the Android L Debloat tool located at the bottom of this post.
If you need to flash back to a previous stock bootloader
Mini-bootloaders - TWRP or Philz recovery already embedded:
Firmware_Only_Odin_Flashable_ Images_For_4.4.. And_5.0_Roms
Full bootloaders:
4.4.2 - [LINK][ROM][ODIN][TAR]SM-G900P NE5 (NE5 Modem/Kernel/ROM - Stock)
4.4.4 - G900PVPU1ANK4_G900PSPT1ANK4_SPR.zip
CUSTOM MODS ODEXED ROM ONLY
Android L NKD build Mods
Features:
- Left capacitive key set as menu
- Recent apps shortcut added to dropdown
- Custom bootanimation support
CUSTOM MODS DE-ODEXED ROM ONLY
NKD New Stuff Rev. XX
HotSpot thread - GS5 Native Hotspot Unlocker
Working version of Facebook
http://forum.xda-developers.com/showpost.php?p=57459676&postcount=183
Credits:
Huge thanks to @gharrington for his Extended Restart Menu and also the 3minit Battery Mod << Please support and thank him here.
Will flash now
ty sir.
I will give it a go!
Sent from my SM-G900P using XDA Free mobile app
Which recovery and version do you recommend?
gremtu1 said:
Which recovery and version do you recommend?
Click to expand...
Click to collapse
I recommend twrp 2.8.10 which i used. If you try philz touch 6.57.8...report how it works for you
rlmiller said:
I recommend twrp 2.8.0.1 which i used. If you try philz touch 6.57.8...report how it works for you
Click to expand...
Click to collapse
Lol thank you very much man. Ill stick to the tried tho loll.
gremtu1 said:
Lol thank you very much man. Ill stick to the tried tho loll.
Click to expand...
Click to collapse
both recovery will work :good:
great work brother. Flashed went flawlessly. No issues so far.
Will test through the night and report anything I may find
Robby
Got it installed. Letting it settle then i will play with it.
Sent from my SM-G900P using XDA Free mobile app
rlmiller said:
I recommend twrp 2.8.0.1 which i used. If you try philz touch 6.57.8...report how it works for you
Click to expand...
Click to collapse
Just an FYI, TWRP has been updated to 2.8.1.0, verson 2.8.0.1 caused issues for many people. Link is in OP.
I wish wanam gets ready for this...
Ramer said:
Just an FYI, TWRP has been updated to 2.8.1.0, verson 2.8.0.1 caused issues for many people. Link is in OP.
Click to expand...
Click to collapse
Thanks for the warning, luckily i only downloaded last night. Gonna get the newest version of twrp real quick and soon i shoukd be on L :3 Just a to confirm though, the 2.8.1.0 you mentioned is the open recovery twrp 2.8.1.0?
gremtu1 said:
Thanks for the warning, luckily i only downloaded last night. Gonna get the newest version of twrp real quick and soon i shoukd be on L :3 Just a to confirm though, the 2.8.1.0 you mentioned is the open recovery twrp 2.8.1.0?
Click to expand...
Click to collapse
Yes, there's also a version by @ktoonsez, as a flashable zip, not a tar.
Ramer said:
Yes, there's also a version by @ktoonsez, as a flashable zip, not a tar.
Click to expand...
Click to collapse
Thanks Ramer.
I'll add one for the stock 2.8.1.0 as soon as I can.
Plus I will be moving all the old recoveries to a separate folder so there is no confusion. Too many people using old TWRP versions that aren't working properly.
So it begins another day at developing, lol morning to all, about to flash test drive this, might throw in a theme if time permits.
tdunham said:
Thanks Ramer.
I'll add one for the stock 2.8.1.0 as soon as I can.
Plus I will be moving all the old recoveries to a separate folder so there is no confusion. Too many people using old TWRP versions that aren't working properly.
Click to expand...
Click to collapse
Ok, this is done. Stock TWRP 2.8.1.0 recovery zip added.
I decided just to delete all of the old recoveries and only keep the most recent of both Philz & TWRP.
running good, got an issue with included su
Rom running ok, little laggy every now and then but SU is the only issue ive found. "There is no SU binary installed and SuperSU could not install it. This is a problem" is the message within SU.
vlx600d said:
Rom running ok, little laggy every now and then but SU is the only issue ive found. "There is no SU binary installed and SuperSU could not install it. This is a problem" is the message within SU.
Click to expand...
Click to collapse
Known issue with Android 5.0.
Sometimes a reboot or two will resolve it but sometimes too it just takes opening an app that asks for root to begin with to give it a kickstart.
vlx600d said:
Rom running ok, little laggy every now and then but SU is the only issue ive found. "There is no SU binary installed and SuperSU could not install it. This is a problem" is the message within SU.
Click to expand...
Click to collapse
Try odin'ing autoroot, letting it reboot, and odin'ing it a second time. I've done it a few times and that seems to work. SU is there, SuperSU just seems to have an issue detecting it with lollipop.
[STOCK ROM][5.0] OA6 Android L Deodexed
Important Note:
This rom will not run unless you're already running a Lollipop bootloader!
This stock rom is based on the OTA OA6 build.
Special thanks @garwynn
And the anonymous donor that contributed this release.
DeOdexed Features:
- 100% Deodexed Lollipop Rom
- Hotspot integrated and working
- Init.d & ADB insecure kernel
- Rooted/SuperSU 2.45
- Knox Removed
- Busybox
- SQLite
- Bootanimation support added
-
Downloads
Full Wipe and install the Full Tar first if not on Lollipop bootloader already!
See instructions below.
DeOdexed Download Link:
>> G900P_OA6.5.0.De-Odexed.Ver1.1.zip <<
MD5 Checksum:
ea8622d30f6ec6a674c3a296513f5881
Important Note:
Initial boot takes a solid 10-15 minutes or more.
Flashing anything that requires optimizing apps (refreshing cache/dalvik cache) ups the (re)boot time to around 20 minutes.
Instructions to Install full Tar File
You MUST be on a 5.0 bootloader to run this rom.
Full Tar Thread Link --> [ODIN][TAR][5.0] SM-G900P OA6 (Official!)
• BACKUP INTERNAL SD before flashing the tar.
• The full tar wipes Data and possibly internal SD too.
• Extract (unzip) the firmware file:
• Download Odin v3.09 Recoveries & ODIN
• Extract Odin zip-file
• Power down the phone (or pull the battery, it is important to flash the OTA from a powered off state)
• Open Odin v3.09
• Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
• Connect phone and wait until you get a blue sign in Odin
• Add the firmware file to AP / PDA (depending on version of Odin)
• Make sure re-partition is NOT ticked
• Click the start button, sit back and wait a few minutes
Rom Installation:
- Install custom recovery with Odin. Recoveries & ODIN
The instructions for Odin above also apply to flashing a custom recovery.
- Reboot into recovery with Pwr/Home/Volume Up
- Full wipe
- Install rom with custom recovery
- OPTIONAL: Before rebooting, I highly recommend also flashing the Android L Debloat tool located at the bottom of this post.
Changelog:
Code:
[B]OA6 deodexed V1.1[/B]
- ItsOn removed
- SecurityLogAgent removed
- Floating messages added
- Wifi calling fix added
- Charging/USB cover toast popup disabled
- SD fix implemented
- Added png converted SecSettings for theme support
[B]OA6 deodexed V1.0[/B]
- Intitial Release
If you need to flash back to a previous stock bootloader
Mini-bootloaders - TWRP or Philz recovery already embedded:
Firmware_Only_Odin_Flashable_ Images_For_4.4.. And_5.0_Roms (Updated for OA6)
Another one here credits to @miked63017 OA6_Firmware_no_system_or_kernel_or_recovery.tar.md5
Full bootloaders:
4.4.2 - [LINK][ROM][ODIN][TAR]SM-G900P NE5 (NE5 Modem/Kernel/ROM - Stock)
4.4.4 - G900PVPU1ANK4_G900PSPT1ANK4_SPR.zip
Kernels & Modems
SM-G900P Kernels
SM-G900P Modems
Credits:
Huge thanks to @gharrington for his 3minit Battery Mod << Please support and thank him here.
- Fix for WifiCalling and extra toggle enabler. All-in-one, flash in recovery.
Download at bottom of this post
- Stock music app flashable zip located at the bottom of this post.
- For testing purposes I've added a flashable zip of the stock features.xml to the bottom of this post. This will revert the wificalling fix but is here to troubleshot any other issues that may be caused by the csc tweaks included within the wificalling fix.
- Flashable zips to switch between custom bootanimation support and stock added to the bottom of this post.
- Android L Floating Messages Mod
This mod may be specific to the deodexed build so no guarantees it will work with odexed.
Screenshots and download located at the bottom of this post.
- Security patched exchange/email mod.
- HiddenMenu: (##DATA#) MSL check removed/PRL Write enabled
- Safe volume check removal mod added.
The reboot will take about 15-20 minutes!
Woo-hoo thank you so much!
Just a heads up if anyone wants to restore an NKD backup it will NOT run on the OA6 bootloader unless the OA6 kernel is flashed along with the restore (before rebooting). I'll add it my kernel repository soon and add a link on the OP to kernels & modems too.
Awesome thanks for all the work tdunham
Sent from my SM-G900P using Tapatalk
Thanks @tdunham, downloading now
Sweet... let's see how this one behave. Thanks
tdunham said:
[STOCK ROM][5.0] OA6 Android L Deodexed
Important Note:
This rom will not run unless you already running a Lollipop bootloader!
This stock rom is based on the OTA OA6 build.
Special thanks @garwynn
And the anonymous donor that contributed this release.
DeOdexed Features:
- 100% Deodexed Lollipop Rom
- Hotspot integrated and working
- Init.d support
- Rooted/SuperSU 2.45
- Knox Removed
- Busybox
- SQLite
- Bootanimation support added
Downloads
Full Wipe and install the Full Tar first if not on Lollipop bootloader already!
See instructions below.
DeOdexed Download Link:
>> G900P_OA6.5.0.De-Odexed.Ver1.0.zip <<
Important Note:
Initial boot takes a solid 10-15 minutes or more.
Flashing anything that requires optimizing apps (refreshing cache/dalvik cache) ups the (re)boot time to around 20 minutes.
Instructions to Install full Tar File
You MUST be on a 5.0 bootloader to run this rom.
Full Tar Thread Link --> [ODIN][TAR][5.0] SM-G900P OA6 (Official!)
• BACKUP INTERNAL SD before flashing the tar.
• The full tar wipes Data and possibly internal SD too.
• Extract (unzip) the firmware file:
• Download Odin v3.09 Recoveries & ODIN
• Extract Odin zip-file
• Power down the phone (or pull the battery, it is important to flash the OTA from a powered off state)
• Open Odin v3.09
• Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
• Connect phone and wait until you get a blue sign in Odin
• Add the firmware file to AP / PDA (depending on version of Odin)
• Make sure re-partition is NOT ticked
• Click the start button, sit back and wait a few minutes
Rom Installation:
- Install custom recovery with Odin. Recoveries & ODIN
The instructions for Odin above also apply to flashing a custom recovery.
- Reboot into recovery with Pwr/Home/Volume Up
- Full wipe
- Install rom with custom recovery
- OPTIONAL: Before rebooting, I highly recommend also flashing the Android L Debloat tool located at the bottom of this post.
If you need to flash back to a previous stock bootloader
Mini-bootloaders - TWRP or Philz recovery already embedded:
Firmware_Only_Odin_Flashable_ Images_For_4.4.. And_5.0_Roms
Full bootloaders:
4.4.2 - [LINK][ROM][ODIN][TAR]SM-G900P NE5 (NE5 Modem/Kernel/ROM - Stock)
4.4.4 - G900PVPU1ANK4_G900PSPT1ANK4_SPR.zip
Credits:
Huge thanks to @gharrington for his 3minit Battery Mod << Please support and thank him here.
Click to expand...
Click to collapse
I'm on 5.0 ndk do i need to install tar or can i just fkash TIA
kmcphee said:
I'm on 5.0 ndk do i need to install tar or can i just fkash TIA
Click to expand...
Click to collapse
Cant say for sure. I think it will run but not 100% certain there wont be any other strange issues. I know you can run NKD roms on the OA6 but just like the 4.4.4 bootloader, you have to also flash the (matching kernel) OA6 kernel or it wont run.
Oh, and you quoted the entire OP?
This might be handy for you guys OA6, no system, no kernel, no recovery
I made it to flash over my CM build to upgrade my Baseband, booloader etc. Feel free to link in OP if you want @tdunham
I have tested it, flashed it right over my CM install and didn't lose anything but gained the new modem etc.
Theoretically, you could flash this in Odin first then your ROM from recovery, and its alot faster than flashing the entire OA6 package.
miked63017 said:
This might be handy for you guys OA6, no system, no kernel, no recovery
I made it to flash over my CM build to upgrade my Baseband, booloader etc. Feel free to link in OP if you want @tdunham
I have tested it, flashed it right over my CM install and didn't lose anything but gained the new modem etc.
Theoretically, you could flash this in Odin first then your ROM from recovery, and its alot faster than flashing the entire OA6 package.
Click to expand...
Click to collapse
Sounds great.
We need one with recovery too please, just in case.
Can the latest KT kernel be used with this Rom?
BrickedHouse said:
Can the latest KT kernel be used with this Rom?
Click to expand...
Click to collapse
You should have asked this on the KT Kernel thread, but yes, it does.
My mistake, thank for your help
tdunham said:
Sounds great.
We need one with recovery too please, just in case.
Click to expand...
Click to collapse
Can do, but the million dollar question: which recovery to put in there lol
I left it out so I wouldn't feel like I was forcing someone to use what I like. I would put my build of TWRP in there if you guys have no preference, but let me know.
Sent from my SM-G900P using XDA Free mobile app
- Bootanimation support added
Click to expand...
Click to collapse
Bootanimation flashes ok for me, but don't show, all I get now is the Samsung S5 screen and 20 seconds later I'm on the home screen. Was the bootanimation support added after the one I tested this morning?
---------- Post added at 02:32 PM ---------- Previous post was at 02:29 PM ----------
miked63017 said:
Can do, but the million dollar question: which recovery to put in there lol
I left it out so I wouldn't feel like I was forcing someone to use what I like. I would put my build of TWRP in there if you guys have no preference, but let me know.
Sent from my SM-G900P using XDA Free mobile app
Click to expand...
Click to collapse
How about KT TWRP? Version 2.8.4.2 was released this morning. Just got done doing a backup and restore with it. :good:
Ramer said:
Bootanimation flashes ok for me, but don't show, all I get now is the Samsung S5 screen and 20 seconds later I'm on the home screen. Was the bootanimation support added after the one I tested this morning?
---------- Post added at 02:32 PM ---------- Previous post was at 02:29 PM ----------
How about KT TWRP? Version 2.8.4.2 was released this morning. Just got done doing a backup and restore with it. :good:
Click to expand...
Click to collapse
I have had problems with newer TWRP builds, I can put one up if needed with the latest but I already uploaded one with an older build I pieced together 2.8.0.1(It seems to be the most reliable for backup and restore to sd card for me)
https://www.androidfilehost.com/?fid=95916177934524380
Let me know if you guys want more, its not hard to make but I will most likely wait until later tonight or tomorrow to make any other requested versions.
Ramer said:
Bootanimation flashes ok for me, but don't show, all I get now is the Samsung S5 screen and 20 seconds later I'm on the home screen. Was the bootanimation support added after the one I tested this morning?
---------- Post added at 02:32 PM ---------- Previous post was at 02:29 PM ----------
How about KT TWRP? Version 2.8.4.2 was released this morning. Just got done doing a backup and restore with it. :good:
Click to expand...
Click to collapse
Custom Bootanimation flashed with Rom Toolbox Pro is working for me.
[STOCK ROM][5.0] OD3 Android L Deodexed
Important Note:
This rom will not run unless you're already running a Lollipop bootloader!
This rom WILL run on both the OA6 and OD3 firmwares.
This stock rom is based on the OTA OD3 build.
DeOdexed Features:
- 100% Deodexed Lollipop Rom
- Rooted/SuperSU 2.45
- Busybox
- SQLite
- Knox Removed
- ItsOn Removed
- Connections Optimizer Removed
Downloads
Full Wipe and install the Full Tar first if not on Lollipop bootloader already!
See instructions below.
DeOdexed Download Link:
>> G900P_OD3_5.0.De-Odexed.Ver1.0.zip <<
MD5 Checksmum: 0f354d90d46ffc35c2a49e1eac40d13a
Important Note:
Initial boot takes a solid 10-15 minutes or more.
Flashing anything that requires optimizing apps (refreshing cache/dalvik cache) ups the (re)boot time to around 20 minutes.
Rom Installation:
- You must install a custom recovery to flash this rom.
- Install custom recovery with Odin. Recoveries & ODIN
(See instructions below to install custom recovery if you don't have it already.
- Reboot into recovery with Pwr/Home/Volume Up
- Full wipe
- Install rom with custom recovery
- OPTIONAL: Before rebooting, I highly recommend also flashing the Android L Debloat tool located at the bottom of this post.
Instructions to Install Recovery with Odin
• Download Odin v3.09 Recoveries & ODIN
• Extract Odin zip-file
• Power down the phone
• Open Odin v3.09
• Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
• Connect phone and wait until you get a blue sign in Odin
• Add the recovery file to AP / PDA (depending on version of Odin)
• Make sure re-partition & Auto Reboot are NOT ticked
• Click the start button.
• Unplug & Reboot phone in Recovery Mode (press and hold Home + Power + Volume Up buttons)
Changelog:
Code:
[B]OD3 deodexed V1.0[/B]
- Intitial Release
Known Issues:
- Google Maps force closes
Uninstall and reinstall from the Play Store
Kernels & Modems
SM-G900P Kernels
SM-G900P Modems
OD3 Hotspot mod
Download at bottom of this post
Note:
This is a framework edit.
Reboot time could be 15-20 minutes while it rebuilds cache.
.......
Great stuff as always TD!
Hotspot modification added to post #2 as an addon.
This can also be flashed right along with the rom during the same recovery session if this is your first time flashing the rom.
Clean install. Wiped everything. Factory reset before and after flash. Everything working fine minus Google maps? Soon as first boot before i could go through welcome setup maps force closed. After i signed into everything and looked around the rom a little i tried opening maps and it force closes doesn't even try to open? Everything else seems gravy so far
[email protected] said:
Clean install. Wiped everything. Factory reset before and after flash. Everything working fine minus Google maps? Soon as first boot before i could go through welcome setup maps force closed. After i signed into everything and looked around the rom a little i tried opening maps and it force closes doesn't even try to open? Everything else seems gravy so far
Click to expand...
Click to collapse
I'll check it out when I get time. Try uninstalling the app and reinstalling from the Play Store. If that works, I'll just add it as a known issue for now.
Will uninstall then reinstall and reboot then let you know. No worries. Just giving you heads up. You guys rock! Thanks for everything!!
[email protected] said:
Will uninstall then reinstall and reboot then let you know. No worries. Just giving you heads up. You guys rock! Thanks for everything!!
Click to expand...
Click to collapse
It looks like that worked so I added it to the OP under Known Issues.
Also, did you guys know that besides the Factory Reset Protection feature (not sure if it even works on this build), that the screen pinning feature is available in Settings/security?
It seems to work but I cant seem to exit pinning holding back/recents key like it tells you to do. Rebooting the phone seems to exit the pinned app is the only way I could clear the pinned app.
Yes. Uninstalling it and rebooting helped. It worked. And now maps works with no issues. So far everything else works as it should. I'll let you know any more issues or errors if i run into them. Thanks for all your hard work and dedication
I have a few questions. Do I install the Rom zip on internal or external SD card. And when do. I. Flash. The. Bloat. File in the. Process. And. Does. Mobil. Oden work. For. This
Question. How do I flash a custom recovery if already on od3? All attempts have failed through odin 3.10.
Would installing the hotspot mod remove the ability to update PRL and Profile via System Update? System Update seems to be missing completely.. Thanks!
garbage30 said:
I have a few questions. Do I install the Rom zip on internal or external SD card. And when do. I. Flash. The. Bloat. File in the. Process. And. Does. Mobil. Oden work. For. This
Click to expand...
Click to collapse
Doesn't matter which storage.
Odin does not flash zip files.
chromatica86 said:
Question. How do I flash a custom recovery if already on od3? All attempts have failed through odin 3.10.
Click to expand...
Click to collapse
Try a different version of odin.
If you're allowing it to auto reboot after flashing custom recovery, it wont work.
Follow the directions on the OP if you're not sure.
droidrage2010 said:
Would installing the hotspot mod remove the ability to update PRL and Profile via System Update? System Update seems to be missing completely.. Thanks!
Click to expand...
Click to collapse
No it shouldn't.
That's odd because that happens on some of the other lollipop roms too (system update missing).
No idea why it happens for some but not others. Maybe someone running this can say if they have it in their flash since I'm not running it at the moment.
So after I. Wipe. I. Update with the Rom zip? And the Rom will be the new os. Sorry I'm use to flashing tar files not updating with zips to get the Rom to work
garbage30 said:
So after I. Wipe. I. Update with the Rom zip? And the Rom will be the new os. Sorry I'm use to flashing tar files not updating with zips to get the Rom to work
Click to expand...
Click to collapse
Yes, that's pretty much it. If you have trouble with the rom, you might consider wiping internal storage too after saving whatever... and reflashing.
So don't unzip the file. 1 more question sorry. The page I found it on here said nothing about kernel or modem yet it had links at the bottom for the Rom. Do you. Know if they r included or do I need to update those too?
garbage30 said:
So don't unzip the file. 1 more question sorry. The page I found it on here said nothing about kernel or modem yet it had links at the bottom for the Rom. Do you. Know if they r included or do I need to update those too?
Click to expand...
Click to collapse
Don't unzip.
The extra links are just for reference.
ROM SM-P601 P601XXDOK4 (New Firmware release)
This will trip KNOX....
So you have been warned about all possible consequences. I am not responsible of anything that can happens to your device.
Please test and report.
Video Preview:
Latest firmware from Samsung P601XXDOK4 LL 5.1.1
Stock.
Deodexed.
Zipaligned.
Not Root ( to root flash SuperSU HERE )
FrameWork:
- 5 Way Reboot TW lollipop
SystemUI :
- Add new effects (WaterDroplet,SparklingBubbles,LensFlare,POPPINGCOLOURS )
- Mod quick icon Note 5 MM 6.0
- Recent bar trans
- Hide backup password text and icon.
Secsetting:
- Remove Power Saving Notification
- Change Modified device status to Normal
Touchwiz home:
- Note 5 icon mod ( folder, all app button)
- SoundAlive_20 support all bluetooth
- CSC tweak and mod
- Enable SD card write permittion
Backup FIRST
- Reboot in Recovery, Power off then push Power and volume up for 3 seconds, release buttons. Wait until TWRP load.
Factory reset and wipe all but Internal and SDcard.
Flash the ROM in recovery with TWRP 2.8.7.0. After flashing if TWRP ask to fix root, DO NOT INSTALL!
Downloads:
P601DOK4ModBinh24 Deoxed
AirCommand Note 5 _for_Note 10.1 2014 (Android 5.1.1)
Download HERE
PRESS THANKS NOW
After doing a full wipe (cache, dalvik cache, system, internal memory) and install, is stuck on black screen. and installing on another rom and doing the wipes, to start, multiple system applications are giving force close constantly.
This rom has the language PT-BR? If not, how can I add?
pcparaosamigos said:
After doing a full wipe (cache, dalvik cache, system, internal memory) and install, is stuck on black screen. and installing on another rom and doing the wipes, to start, multiple system applications are giving force close constantly.
This rom has the language PT-BR? If not, how can I add?
Click to expand...
Click to collapse
Flash stock P601XXDOK4 ROM then my ROM
TO enable PT-BR you can try to delete language.xml on system/csc
binh24 said:
Flash stock P601XXDOK4 ROM then my ROM
TO enable PT-BR you can try to delete language.xml on system/csc
Click to expand...
Click to collapse
You didn't explain the word "then" is it clean or dirty flash, anyway, I have tried both ways to flash your ROM.
1. Dirty Flash
The ROM was successfully flashed, but when I go for setting, it FC.
2. Clean Flash
It won't boot at all, stop on blank screen after Samsung logo.
I have tried both ways, without any mods, SuperSU or any additional apps. Thus, I believe, your ROM is conflicting with the original stock. This is almost the same as the other deodexed DOK4 ROM, while the DOJ5 ROM seems working nicely.
Perhaps it is better to play around with DOJ5 ROM instead of DOK4, or maybe you can find the error on future development. Thanks for your wonderful effort, your ROM surely looks better than the stock, just need some fixing. Keep up the work.
How To Flash This ROM + SuperSU
binh24 said:
Flash stock P601XXDOK4 ROM then my ROM
TO enable PT-BR you can try to delete language.xml on system/csc
Click to expand...
Click to collapse
binh24 said:
ROM SM-P601 P601XXDOK4 (New Firmware release)
This will trip KNOX....
So you have been warned about all possible consequences. I am not responsible of anything that can happens to your device.
Please test and report.
Video Preview:
Latest firmware from Samsung P601XXDOK4 LL 5.1.1
Stock.
Deodexed.
Zipaligned.
Not Root ( to root flash SuperSU HERE )
FrameWork:
- 5 Way Reboot TW lollipop
SystemUI :
- Add new effects (WaterDroplet,SparklingBubbles,LensFlare,POPPINGCOLOURS )
- Mod quick icon Note 5 MM 6.0
- Recent bar trans
- Hide backup password text and icon.
Secsetting:
- Remove Power Saving Notification
- Change Modified device status to Normal
Touchwiz home:
- Note 5 icon mod ( folder, all app button)
- SoundAlive_20 support all bluetooth
- CSC tweak and mod
- Enable SD card write permittion
Backup FIRST
- Reboot in Recovery, Power off then push Power and volume up for 3 seconds, release buttons. Wait until TWRP load.
Factory reset and wipe all but Internal and SDcard.
Flash the ROM in recovery with TWRP 2.8.7.0. After flashing if TWRP ask to fix root, DO NOT INSTALL!
Downloads:
P601DOK4ModBinh24 Deoxed
AirCommand Note 5 _for_Note 10.1 2014 (Android 5.1.1)
Download HERE
PRESS THANKS NOW
Click to expand...
Click to collapse
Finally I have succeeded to flash this good looking ROM on my SM-P601, these are the steps;
(Please follow and read properly)
-----------------------------------------------------------------------------------------------------------------
1. Download deodexed DOJ5 ROM from the next door thread (Official Deodexed)
2. As usual, put it on your SDCard
3. Boot into TWRP, for me, I use TWRP 2.8.76
4. Flash the deodexed DOJ5 ROM til its done (by default it will install SuperSU 2.52)
5. When DOJ5 is done, do clean dalvik and cache, just those 2 and no others
6. Then flash this modded DOK4 ROM and wait til its done
**Though this modded DOK4 is deodexed, it has no root access which it will conflict with the previous installed DOJ5 and it may cause boot failure or bootloop, thus, you need systemless SuperSU
7. Next is to flash SuperSU 2.66 (I haven't tried using CF AutoRoot)
8. When everything is complete, again do clean dalvik and cache
9. Boot to system without installing SuperSU from TWRP (it will ruin systemless SuperSU 2.66)
**REMEMBER TO NEVER INSTALL SUPERSU FROM TWRP IT WILL BREAK ROOT
--------------------------------------------------------------------------------------------------------------------
Result are shown by attached picture
1. Base ROM is DOK4
2. Baseband is DOJ4
3. Note 5 Icons and appearance
4. Root access
5. Ext SDCard access R/W
6. 5 ways on reboot menu (on restart option)
7. Camera is working
8. Latest Google Play
9. Updated Galaxy Apps
10. ViperFX Working
11. Air Command Working (Disable default air command if you wish to use this new looks)
That's all folks, enjoy the ROM and please be kind to say thank you on binh24' wonderful work for our beloved SM-P601.
Maaciiih cemuaaah...... Salam dari Jakarta
ghembuls said:
Finally I have succeeded to flash this good looking ROM on my SM-P601, these are the steps;
(Please follow and read properly)
-----------------------------------------------------------------------------------------------------------------
1. Download deodexed DOJ5 ROM from the next door thread (Official Deodexed)
2. As usual, put it on your SDCard
3. Boot into TWRP, for me, I use TWRP 2.8.76
4. Flash the deodexed DOJ5 ROM til its done (by default it will install SuperSU 2.52)
5. When DOJ5 is done, do clean dalvik and cache, just those 2 and no others
6. Then flash this modded DOK4 ROM and wait til its done
**Though this modded DOK4 is deodexed, it has no root access which it will conflict with the previous installed DOJ5 and it may cause boot failure or bootloop, thus, you need systemless SuperSU
7. Next is to flash SuperSU 2.66 (I haven't tried using CF AutoRoot)
8. When everything is complete, again do clean dalvik and cache
9. Boot to system without installing SuperSU from TWRP (it will ruin systemless SuperSU 2.66)
**REMEMBER TO NEVER INSTALL SUPERSU FROM TWRP IT WILL BREAK ROOT
--------------------------------------------------------------------------------------------------------------------
Result are shown by attached picture
1. Base ROM is DOK4
2. Baseband is DOJ4
3. Note 5 Icons and appearance
4. Root access
5. Ext SDCard access R/W
6. 5 ways on reboot menu (on restart option)
7. Camera is working
8. Latest Google Play
9. Updated Galaxy Apps
10. ViperFX Working
11. Air Command Working (Disable default air command if you wish to use this new looks)
That's all folks, enjoy the ROM and please be kind to say thank you on binh24' wonderful work for our beloved SM-P601.
Maaciiih cemuaaah...... Salam dari Jakarta
Click to expand...
Click to collapse
I really decided to try to make a rom deodexed and after breaking a bit the head, I made my first full, rom, deodexed rooted, debloated, although still have been useless applications each man to see. But gradually I am improving yourself. at the moment, my full testing rom p601xxudoj4 region SER. Working so far And normal. i would like to learn how to make mods, like the menu off with 5 functions. finally, one step at a time.
Has anyone tried to flash the air command alone? does it work?
ridicul0us said:
Has anyone tried to flash the air command alone? does it work?
Click to expand...
Click to collapse
It working for me
datdoan said:
It working for me
Click to expand...
Click to collapse
Hi, are you using P601XXDOK4 rom? I'm using P601ODDDOJ3 from India and I think it only works if I flash it with the lockscreen effect.
P601xxudok4
Stock rom cooked by me.
● Deodexed
● Debloated
● Rooted with new method that does not generate conflict with bootloader
● Fix external sdcard write
● All languages available
● Knox removed
⊙ advisable to do an installation clean. it may be that the screen is black in the part to choose the languages. turn off and turn on the screen that all back to normal.
● Link: https://drive.google.com/file/d/0B2a0geYLaY0oZ1VCT1BDeUFKbGM/view?usp=docslist_api
ridicul0us said:
Hi, are you using P601XXDOK4 rom? I'm using P601ODDDOJ3 from India and I think it only works if I flash it with the lockscreen effect.
Click to expand...
Click to collapse
yes, i using DOK4 ROM.
can i install this rom directly to P602? is this work?
stormy_ugur said:
can i install this rom directly to P602? is this work?
Click to expand...
Click to collapse
I do not know if will work. and they both p601 p602 possess the same hardware, but I do not have a problem with bootloader. you try if you have a way to restore your device in case of error.
This ROM look good. I am downloading.:laugh:
binh24 said:
ROM SM-P601 P601XXDOK4 (New Firmware release)
This will trip KNOX....
So you have been warned about all possible consequences. I am not responsible of anything that can happens to your device.
Please test and report.
Video Preview:
Latest firmware from Samsung P601XXDOK4 LL 5.1.1
Stock.
Deodexed.
Zipaligned.
Not Root ( to root flash SuperSU HERE )
FrameWork:
- 5 Way Reboot TW lollipop
SystemUI :
- Add new effects (WaterDroplet,SparklingBubbles,LensFlare,POPPINGCOLOURS )
- Mod quick icon Note 5 MM 6.0
- Recent bar trans
- Hide backup password text and icon.
Secsetting:
- Remove Power Saving Notification
- Change Modified device status to Normal
Touchwiz home:
- Note 5 icon mod ( folder, all app button)
- SoundAlive_20 support all bluetooth
- CSC tweak and mod
- Enable SD card write permittion
Backup FIRST
- Reboot in Recovery, Power off then push Power and volume up for 3 seconds, release buttons. Wait until TWRP load.
Factory reset and wipe all but Internal and SDcard.
Flash the ROM in recovery with TWRP 2.8.7.0. After flashing if TWRP ask to fix root, DO NOT INSTALL!
Downloads:
P601DOK4ModBinh24 Deoxed
AirCommand Note 5 _for_Note 10.1 2014 (Android 5.1.1)
Download HERE
PRESS THANKS NOW
Click to expand...
Click to collapse
successed install this Rom. but there are 2 problems :
1. always showup notification securitu notice
unauthorized actions have been detected. tap here for more information.
=> how to stop this notification??
2. air command
yes it works. but so sad the function isn't the same with note 5 function. for example : screen write. I cannot capture like note 5 do. wish it have note 5 function hehehe.
I know this is a little off topic but i didnt know whether or not to make a new topic so i thought I'd ask. I download the official 5.1.1 rom for P601 from sammobile. Thing is, its the Russian one (P601XXUDOJ2_P601SERDOJ2_SER) and mine is from South Africa (P601XXUCNJ1)
Will it work as normal on my device? I am not rooted
Sent from my SM-G925F using Tapatalk
timberland88 said:
I know this is a little off topic but i didnt know whether or not to make a new topic so i thought I'd ask. I download the official 5.1.1 rom for P601 from sammobile. Thing is, its the Russian one (P601XXUDOJ2_P601SERDOJ2_SER) and mine is from South Africa (P601XXUCNJ1)
Will it work as normal on my device? I am not rooted
Sent from my SM-G925F using Tapatalk
Click to expand...
Click to collapse
It should work without any problem
hope it can help
pippone121263 said:
It should work without any problem
hope it can help
Click to expand...
Click to collapse
Thanks for the feedback. Flashed it via Odin. Had some lag upon the first reboot but a factory reset solved the problem. Running very smooth
Sent from my SM-G925F using Tapatalk
timberland88 said:
Thanks for the feedback. Flashed it via Odin. Had some lag upon the first reboot but a factory reset solved the problem. Running very smooth
Sent from my SM-G925F using Tapatalk
Click to expand...
Click to collapse
Did you flash twrp after you flashed the rom. I am failing to get recovery flashed.
Sent from my SM-P601 using Tapatalk
s2mishappy said:
successed install this Rom. but there are 2 problems :
1. always showup notification securitu notice
unauthorized actions have been detected. tap here for more information.
=> how to stop this notification??
Click to expand...
Click to collapse
------Solution--------------------------------------
1. Install free "Package Disabler" Or 'Titanium BackUp' from Google Play Store.
2. Launch this app, search for "SecurityLogAgent".
3. Then disable/freeze it.
Do not do anything else. That's it.
Result: You will not see this annoying notification again.