phone note 4..
gearfit was on BOA2 was trying to just reflash BOA2.
my gear fit rebooted in the middle of the odin update .. so now.. it is bucked withe the yellow triangle. i turned it off for 6 hours and it still shows the triangle. and when i try to use kies.. recovery and i type in my model number SM-R350 and my serial number.. KIES tells me that it can not find SM-R350 devices i am using the latest version from samsung site.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.0905)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> font.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Guys I need some help ! Recently I tried to root my S6 Edge following a tutorial on internet but the thing is I got stuck in a loop.
At the first time it was stuck on the Samsung logo and saying on the upper left corner with red "RECOVERY IS NOT SEANDROID ENFORCING" . Then I read somewhere else that I need to flash with Odin its stock firmware and I got the stock firmware for its model ( SM-G925F from Germany ) and when I'm flashing the stock firmware I get this problem:
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'll post a screenshot as soon as I do 10 posts.
so i bought a so called faulty galaxy mega of ebay with software problem
When i boot the phone it sticks on galaxy mega logo for a bit and restarts and does it over and over again
when i try to boot into recovery it shows android logo no command and restarts in few seconds i though eh maybe firmware is corrupt il just load a twrp cm rom on my sd card and flash it but nooo when i try to flash twrp via odin i get
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
any ideas how to fix this and if there is a file i have to download or whatever please add it if you know where to find it
Also i noticed when i flash stock firmware with or without pit file it flashes alright then restarts attempts to boot into recovery and starts factory reset shows no command seconds later and then restarts
Selling my G925F (Galaxy S6 Edge) and it was rooted with CarHD Rom that I used, I wanted to remove this and return it back to stock so I tried doing a few ways to unroot it with much fail, I ended up using the TWRP recovery and wiping absolutely everything...
Now I am in ODIN trying to flash a ROM I found for my phone, its not working. Its either sticking on ConnectionSetup and then telling me WriteError or something..
I am 100% in download mode, I have downloaded the latest SAmsung mobile drivers. Just cant get it to work, whether or not the ROM I am trying to flash is bad I dont know, so I am back on this forum trying other ROMS, even trying other custom ROMS just to get the phone up and running again but it seems the way you flash these ROMS is not via ODIN and that you actually need the phone to be working to do so?
Can anyone help me sort this out please, if this is what classing "bricked" as, please help me unbrick
Dstruct88 said:
Selling my G925F (Galaxy S6 Edge) and it was rooted with CarHD Rom that I used, I wanted to remove this and return it back to stock so I tried doing a few ways to unroot it with much fail, I ended up using the TWRP recovery and wiping absolutely everything...
Now I am in ODIN trying to flash a ROM I found for my phone, its not working. Its either sticking on ConnectionSetup and then telling me WriteError or something..
I am 100% in download mode, I have downloaded the latest SAmsung mobile drivers. Just cant get it to work, whether or not the ROM I am trying to flash is bad I dont know, so I am back on this forum trying other ROMS, even trying other custom ROMS just to get the phone up and running again but it seems the way you flash these ROMS is not via ODIN and that you actually need the phone to be working to do so?
Can anyone help me sort this out please, if this is what classing "bricked" as, please help me unbrick
Click to expand...
Click to collapse
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCY_G925FEVR1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Got a little further, at least it tries to start but now its just constantly failing
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 3564 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Dstruct88 said:
Got a little further, at least it tries to start but now its just constantly failing
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 3564 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
1. Try older / newer version of odin.
1.5 Try to start odin with administrator rights
2. Try different usb cable
3. Try different pc / os
4. Try different rom
Hi there,
The Samsung S7 Edge of a friend got stuck @boot. I have tried to reset and wipe. But that does not solve the problem.
So now i am trying to put on the latest official firmware from Samfw, Smammobile and/or Frija but Odin 3.14 fails.
I think the phone got stuck in an OTA update.
Please help
Here are more details.
S7 Edge SM-G935FD in the Netherlands (PHN), the G935F version should be working as well, its an exynos chipset with dual sim.
In download mode it says on top left:
Product Name: SM-G935F
Current Binary: Samsung Official
System Status: Official
FRP Lock is ON (i cannot go to devevlopper mode to change that)
Secure Donwload: Enabled
Warranty Void: 0
AP: SWREV: B:8 K:6 S:7
I followed all kind of guides on XDA
Get the right Odin 3.14
Get the right Firmware. Samfw.com_SM-G935F_PHN_G935FXXU8ETI2
Using Default Odin Settings
I have a connection to the phone.
This is the ODIN log:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 4045 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What am i missing?
Is the device locked somehow? Or is it a hw failure?
Dekay99