[KERNEL][5.1.1][TW][N910F/G] Simplicity Kernel [10-04-2016] - Galaxy Note 4 Android Development (Snapdragon)

Welcome to Simplicity Kernel thread!
Samsung Galaxy Note 4 SM-N910F
N910FXXU1POK1 TW 5.1.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Simpl, where Performance, Speed, Stability and Battery life have no limits.
THREAD INDEX:
I. INTRODUCTION
II. FEATURES
III. DOWNLOADS
IV. CREDITS
Second Post. Kernel Knowledge Database
#_____________________________#​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for any bricked devices, dead SD cards,
* or any kind of damage to your phone whether soft or hard brick
*/
I. INTRODUCTION
Simplicity Kernel, Provides a great balance between performance and battery consumption.
It will get more features soon, but it's already a great alternative to stock, or the kernels with overwhelming amounts of options.
II. FEATURES
Features:
These are the features.
- Reduced a lot of wakelocks
- Fixed quite a few MemoryLeaks
- F2FS Support
- CIFS Support
- NTFS Support
- Gentle Fair Sleepers toggle
- Force USB Fast Charge
- Add system wide power_efficient workqueues
- Added I/O Schedulers (Noop, Deadline, Row, CFQ, Test-iosched, Sio, Fifo, Zen, Vr, Fiops)
- Adreno idler
- Simple GPU Algorithm
- Dynamic Fsync Control
- Enable/Disable Android Logger
- Enable/Disable CRC
- Add cpu Governors (Interactive pro, intelliactive, bluactive, conservativex, alucard, darkness, nightmare, wheatley, ondemandplus, umbrella_core,
yankactive, smartmax, dancedance, interactive, conservative, ondemand, userspace, powersave, bioshock, Lionheart, performance)
- LED control
- GPU overclock to 800Mhz and underclock to 166Mhz
- Improved overall performance.
- higher battery optimization.
- low Memory Killer tuners.
- TCP Schedulers.
(Westwood, reno, bic, cubic, highspeed, hybla, htcp, vegas, veno, scalable, lp, yeah, illinois)
III. DOWNLOAD
Android File Host
Dev Host
Got questions? Contact us on Telegram
IV. CREDITS
Our lovely testers that risked (and survived) bootloops and softbricks through all our crazy experiments!
Special thanks to all the great developers, who inspired me to cherry-pick from such as Ktoonsez, Faux123, placiano, arter97, friedrich420, yank555-lu, and especially Pafcholini and Hani K.!
:good: Enjoy and feedback is always appreciated :good:​
-
XDA:DevDB Information
[KERNEL][5.1.1][TW][N910F/G] Simplicity Kernel [10-04-2016], Kernel for the Samsung Galaxy Note 4
Contributors
Psycho_666, Hani K.
Source Code: https://github.com/Psycho666/Simplicity_trlte_kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2016-04-10
Created 2016-03-13
Last Updated 2016-04-10

Kernel Knowledge database
Here some info about some parts that are in the kernel:
A lot of info about CPU and GPU governors
A lot of info about I/O schedulers
Changelog:
v1
- Compiled with Toolchain Linaro GCC 5.1.0 Stable
- SELinux Permissive.
- Patched till 3.10.95
- Reduced a lot of wakelocks
- Fixed quite a few MemoryLeaks
- F2FS Support
- CIFS Support
- NTFS Support
- Gentle Fair Sleepers toggle
- Force USB Fast Charge
- Add system wide power_efficient workqueues
- Added I/O Schedulers (Noop, Deadline, Row, CFQ, Test-iosched, Sio, Fifo, Zen, Vr, Fiops)
- Adreno idler
- Simple GPU Algorithm
- Dynamic Fsync Control
- Enable/Disable Android Logger
- Enable/Disable CRC
- Add cpu Governors (Interactive pro, intelliactive, bluactive, conservativex, alucard, darkness, nightmare, wheatley, ondemandplus, umbrella_core,
yankactive, smartmax, dancedance, interactive, conservative, ondemand, userspace, powersave, bioshock, Lionheart, performance)
- LED control
- GPU overclock to 800Mhz and underclock to 166Mhz
v1.1
- Hotplugs added (MSM, bricked, Intelli, Zen)
- BusyBox updated (busybox on rails version 1.24.1)
- SimplTweaks page added in synapse
- HardLimit
- voltage control
- Intelli Thermal Control
- PowerSuspend control
- Added hotplug Hysteresis slider
- added FStrim
- added SimplCleaner
- added Vibration strength control
- fixed LMK profiles
- added Scrolling Cache control
- cypress-touchkey key disabler
- Synapse 0.44
- a lot of extra optimisations and fixes

1 goood work test now

Title edit Justin , working great on 910G just fine. :good: :good:
Applause to you and Simpl team

Senthil360 said:
Title edit Justin , working great on 910G just fine. :good: :good:
Applause to you and Simpl team
Click to expand...
Click to collapse
thanks :good:
added it to the title :highfive:

Flashed.works. no root. Flashed supersu. Doesn't boot.
N910f stock

tanks testing
edit dont boot n910 Dr.Ketan ROM N5

Work on kyubi 910f no problem with su or boot,1 thing i miss is wake gestures.
Thanks 4 work and time.
Sent from my SM-A710F using Tapatalk

Motawa88 said:
Flashed.works. no root. Flashed supersu. Doesn't boot.
N910f stock
Click to expand...
Click to collapse
after flashing the kernel you lost root?
did you check the MD5 before flashing? i think something went pretty wrong
bollycao18 said:
tanks testing
edit dont boot n910 Dr.Ketan ROM N5
Click to expand...
Click to collapse
odd , do kernels like emotion and nameless work on that rom then?
or only the built-in kernel?
zexmunze said:
Work on kyubi 910f no problem with su or boot,1 thing i miss is wake gestures.
Thanks 4 work and time.
Sent from my SM-A710F using Tapatalk
Click to expand...
Click to collapse
glad it works fine for you :good:
we only just released the first version, next versions will only get more features and optimisations

Is it safe to flash it on CPC1?

Psycho_666 said:
after flashing the kernel you lost root?
did you check the MD5 before flashing? i think something went pretty wrong
odd , do kernels like emotion and nameless work on that rom then?
or only the built-in kernel?
glad it works fine for you :good:
we only just released the first version, next versions will only get more features and optimisations
Click to expand...
Click to collapse
Yes I'm using emotion kernel And the others boot fine tanks for your reply

Now it's working just remove the boot.img from zip file and flash with twrp images boot
Tanks and keep good work

bollycao18 said:
Yes I'm using emotion kernel And the others boot fine tanks for your reply
Click to expand...
Click to collapse
+
bollycao18 said:
Now it's working just remove the boot.img from zip file and flash with twrp images boot
Tanks and keep good work
Click to expand...
Click to collapse
Thanks for the feedback guys, I'll see what I can change in the next version so it'll hopefully work immediately for you as well :good:

yes, cut all wakelocks if possible and add the gesture wake, thank youuuuuuuuuuu

Link is down ?
Verstuurd vanaf mijn SM-N920G met Tapatalk

magikmichael said:
Link is down
Verstuurd vanaf mijn SM-N920G met Tapatalk
Click to expand...
Click to collapse
Working just fine.
Tried on phone and pc.

Ximonus said:
Working just fine.
Tried on phone and pc.
Click to expand...
Click to collapse
Strange. Will try another browser or else i will dl with my laptop. Thanks.
Yep its working now. Dont know what it was.
Verstuurd vanaf mijn SM-N920G met Tapatalk

I have. An issue with synapse
Envoyé de mon SM-N910F en utilisant Tapatalk

lehongwang said:
yes, cut all wakelocks if possible and add the gesture wake, thank youuuuuuuuuuu
Click to expand...
Click to collapse
already working the next version
i've got so many ideas to implement...it's going to be great
magikmichael said:
Link is down
Verstuurd vanaf mijn SM-N920G met Tapatalk
Click to expand...
Click to collapse
link isn't down thankfully, but i added a second download link anyway :good:
zenosteam said:
I have. An issue with synapse
Envoyé de mon SM-N910F en utilisant Tapatalk
Click to expand...
Click to collapse
i know the problem, still looking into fixing it, thanks for the heads-up though :good:

Working smooth but only one issue , facing bootloop once bettery % goes less than 18%
N910G + Kyubi Last rom.

Related

[Kernel][TW][Lollipop][N9005][Linux 3.4.108]Audax Kernel v2.8[SYNAPSE][15/01/16]

AUDAX KERNEL v2.8
Kernel for the Samsung Galaxy Note 3 (N9005-N900T)
Based and continue of Fulgor Kernel by slim80
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features of this Kernel:
- Based on Fulgor Kernel source (Samsung OF1 LL Opensource OEA)
- Patches ported from the OC3 HK source
- Updated to Linux 3.4.108
- Compiled with the last Christopher83 LINARO optimized for Cortex A15
- OL3 initramfs
- CPU Overclock 2.72
- Added Synapse support
- Added Synapse (build-in) Full Control
- Init.d support
- SELinux set to "Permissive"
- Disabled TIMA verifications and logs
- Disabled Knox verifications
- Added sio, sioplus, bfq, vr, fifo, fiops zen and tripndroid I/O schedulers
- Added Zzmoove, Performance, Intellimm, Onedemandplus, Smartmax, Intelliactive and Yankactive, Lionheart CPU governors
- Added Arteractive CPU Governor (thanks to arter97)
- Update Interactive CPU governor to InteractiveX (thanks to Imoseyon)
- Adreno idler, an idling algorithm (thanks to arter97)
- FauxSound Audio/Sound Control support (drivers version 3.6)
- Added Simple GPU Algorithm for devfreq based Adreno Drivers (thanks to Faux123)
- CPU undervolt support
- TCP congestion controll
- Private Mode support
- arch: arm: lib: optimize memcpy for cortex-A15 (thanks to Chandler Zhang)
- Added Intelli Plug (thanks to Faux123)
- Added Power Suspend (thanks to Faux123)
- Added Force Fast Charge (thanks to yank555-lu)
- Added Intelli-thermal v2 (thanks to faux123 and yank555-lu)
- Others fix and patch for better performance and stability
Changelog Audax Kernel v2.8
- OL3 initramfs
Click to expand...
Click to collapse
Download:
Audax Kernel v2.8
md5: 4c086c594638a6d934c2d6844686a925
Audax Kernel N900T v2.8
md5: a91ce490d35f75df5c3490ac5b1404f4
Flash this zip before to install a new kernel:
Kernel_Cleaning_AudaxL_v2.9​
Credits/Thanks:
- Samsung for sources
- @Christopher83 for the compiler
- @slim80 without his great work he did here with Fulgor Kernel, I could never have made this here. I also have to say, he helped me so much and I really bothered him many times until I get to know more and more with this stuff here. A thanks simply isn't enough, he is a great person and great dev. Thanks my friend!
- @faux123 for all the great stuff he did for the kernels
- @Yank555
- @civato
- @arter97
- and all devs of mods and patches that are included in my kernel.
- Thanks also to my friend WalterWhite and my beta-testers (pescixx79, donpino62, uzzz2004, calibrox81x, AndroidXforever, pupps96)
Source Code:
Github
Contributors
Fulgor Kernel
I'M NOT RESPONSIBLE FOR ANY POSSIBLE DAMAGE DONE TO YOUR DEVICE AS A RESULT OF FLASHING.
I WILL NOT TAKE ANY RESPONSABILITY FOR BRICKED PHONES OR LOST DATA.
If you like my work...
- - - Audax L Rom Thread - - -
Great great [emoji106] [emoji106] .... Great job my friend Audax Rom and kernel ... Coupled winning [emoji122] [emoji122] [emoji122]
Big Rom for Big Kernel tnx dear Pierdebeer ???
Great Job my friend!!! ????
Inviato dal mio SM-N9005 utilizzando Tapatalk
Best rom best kernel good job pier ?
posted by Note 3 with Audax Rom
??????
A great rom.......now a great kernel.......from a great dev !!!!! Congratulations pierdebear !!!!
Not completely clear... is this replacing Fulgor kernel?
cdzo72 said:
Not completely clear... is this replacing Fulgor kernel?
Click to expand...
Click to collapse
Yes.......absolutely !!! try and see
cdzo72 said:
Not completely clear... is this replacing Fulgor kernel?
Click to expand...
Click to collapse
Fulgor Kernel ends development. Slim80 can not continue. I will try in my can to continue the development in Audax Kernel.
Tks
Tks
So many TW Kernel
Sent from my SM-N9005 using Tapatalk 2
Amazing, thank you very much for your work dear Mr.
Gesendet von meinem SM-G9250 mit Tapatalk
Why not update kernel source to OEA ? Battery life and deep sleep is better .
amazing...thankssssssss
Sent from my SM-G9250 using Tapatalk
ksr007 said:
Why not update kernel source to OEA ? Battery life and deep sleep is better .
Click to expand...
Click to collapse
Were not released OEA Source. updated with initramfs OEA
3.4.0 audax kernel
carlitobahsoun said:
amazing...thankssssssssView attachment 3379812View attachment 3379813View attachment 3379814
Sent from my SM-G9250 using Tapatalk
Click to expand...
Click to collapse
deleted
pleataa said:
i want this kernel. please link to me thank you
Click to expand...
Click to collapse
[emoji33] [emoji33] dude it is in the op
@Plaeta ...lol.....u are in the kernel theard...come on .....
Sent from my SM-G9250 using Tapatalk
carlitobahsoun said:
@Plaeta ...lol.....u are in the kernel theard...come on .....
Sent from my SM-G9250 using Tapatalk
Click to expand...
Click to collapse
i;m blind...)) my fault , but the kernel cleaner link does not worked.

[L7 II][KERNEL][4.1.2][ver 02] Phoenix [2015-08-10]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Phoenix Kernel
Phoenix -Kernel For Optimus L7 II (vee7)
P710-P714​
Features
Based on the STOCK Source v10a from LG
Toolchain: Built with GCC 4.7 toolchain from SABERMOD
Linux: 3.4.0
Swap
zRam Support: support for zRam memory compression
KSM: Kernel Same-page Merging enable
Dynamic Fsync: Faux123's Dynamic File Sync v1.2
ARM optimizations
Fast Charge: chad0989 fast_charge driver, allowing to set the amperage of the charger or USB port your device is plugged-in to (default disabled)
Lowered swappiness (60 -> 45)
Optimized AES and SHA1 routines for ARM cpu architecture
Optimized SLUB memory allocator
Optimized ARM RWSEM (read/write semaphore)
Fast Random generator (frandom) support
Optimizations: Built with -O2 and many optimization flags
Intelliplug 3.8 thanks faux123 (Ecomode (more battery saving))
Governors:
- SIO (SImple Ondemand)
- Interactive
- Conservative
- Ondemand
- Userspace
- Powersave
- Performance
Additional Governors:
- SmartassV2
- Badass
- Lionheart
- Lagfree
- PegasusQ
- OndemandX
I/O Schedulers:
- Noop
- Deadline
- CFQ
Additional I/O Schedulers:
- SIO (SImple Ondemand)
- Fiops
Click to expand...
Click to collapse
The REQUIREMENTS
A unlocked bootloader
Custom Recovery CWM/PHILZ/TWRP
A brain with the ability to read
The will to recycle your warranty papers
The INSTRUCTIONS
Copy the zip to your sdcard
boot into recovery
flash the zip
reboot
enjoy
What is Intelli_plug and Ecomode? From FAUX123
Intelli_plug. Intelli_plug is a generic ARM SOC cpu hotplug driver. This is a COMPLETE replacement for Qualcomm's proprietary make poor decision. Intelli_plug has built-in Eco Mode support (Eco Mode is a optimized dual core solution for quad-core SOC like the Qualcomm S4-pro. This should allow for Maximum battery life without sacrificing performance). Because intelli_plug is a generic hotplug cpu driver, it will work with ALL CPU governors from conservative, ondemand, interactive and intellidemand and Eco Mode is available for ALL cpu governors as well!!!!
intelli_plug is automatically enabled when mpdecision is disabled.
Click to expand...
Click to collapse
The THANKS
faux123
srfarias
gokhanmoral
markus-oberhumer
ariava
paolo-github
CastagnaIT
tiny4579
flar2
special thanks to Mario Rodriguez Castro for being my tester​
Do you like my Kernel? use this buttons for support me
DOWNLOAD
Phoenix-V1
Phoenix-V2​
Fanpage: like = future project​
https://www.facebook.com/Phoenix-DEV-1719991991571980/​
XDA:DevDB Information
Kernel Phoenix, Kernel for the LG Optimus L7 II
Contributors
chijure
Source Code: https://github.com/chijure/android_kernel_lge_vee7
Kernel Special Features: UV, Fast Charge, Swap, Zram, KSM, Dynamic Fsync, F2FS, Frandom, , SIO, VR, FIOPS, Intelliplug, BFQ, ...
Version Information
Status: Stable
Current Stable Version: 02
Stable Release Date: 2015-08-10
Created 2015-07-15
Last Updated 2015-08-10
CHANGELOG
CHANGELOG​
2015-07-11 Phoenix v1
Initial relase
USB force fast charging
updated libraries with optimized kernel functions
updated LZO algorithms
ARM unaligned access enabled
FIOPS I/O schedulers added
SIO I/O schedulers added
Enable Deadline
Add /dev/frandom support
Add dynamic sync control
compiled with GCC 4.7
2015-08-10 Phoenix v2
Add governor SmartassV2
Add governor Badass
Add governor Lionheart
Add governor Lagfree
Add governor PegasusQ
Add governor OndemandX
zcache/zram: add support for ARM, MIPS, SUPERH
Squash Intelli_plug 3.8 from faux123
I have Purified v1 ROM, LG P710. Can I install this kernel? Thank you.
krnjinac said:
I have Purified v1 ROM, LG P710. Can I install this kernel? Thank you.
Click to expand...
Click to collapse
Yes [emoji4] It works on all stock-based roms 4.1.2
Enviado desde mi XT1032 mediante Tapatalk
Gonna test it right now
Can I?
Hey you guys ! thanks! great job ! , I have a question, can I install it if I'm using the amigakitkat rom? Pls Help me!
Read carefully before asking. The title of the thread itself says 4.1.2 which is JellyBean. Amiga KitKat is... well... KitKat(4.4.x) obviously. This kernel is for 4.1.2 JellyBean only.
Good job man
I have some buttons fails sometimes when I use any app, here a log bellow:
gohaz0331 said:
I have some buttons fails sometimes when I use any app, here a log bellow:
Click to expand...
Click to collapse
that variant of the L7 II has ?? example p710
chijure said:
that variant of the L7 II has ?? example p710
Click to expand...
Click to collapse
I have the p714 (single sim version without nfc).
gohaz0331 said:
I have the p714 (single sim version without nfc).
Click to expand...
Click to collapse
I have the p714 also and I have no errors
Hello everyone. What's the difference in stability and performance with this kernel and this one by Airidosas? Can't test right now,but interested =)
Thanks for you work and time.
I have a question, how to enable zRAM? I tried with Kernel Adiutor but i can't enable this option.
Greetings from Mexico and sorry for my bad English.
DS_katauri said:
Hello everyone. What's the difference in stability and performance with this kernel and this one by Airidosas? Can't test right now,but interested =)
Click to expand...
Click to collapse
This kernel already has all the of Airidosas but with more features
raffles496 said:
Thanks for you work and time.
I have a question, how to enable zRAM? I tried with Kernel Adiutor but i can't enable this option.
Greetings from Mexico and sorry for my bad English.
Click to expand...
Click to collapse
Sorry my mistake is in v1 that is already fixed in V2 thanks
chijure said:
This kernel already has all the of Airidosas but with more features
Click to expand...
Click to collapse
Well,v1 was discharging a bit faster,gonna try v2 today. A noob question,will it support dual sim revision of LG L7 ll? As i noticed there actually arent modern optimised kernels for dual sim. And a second one,overclock is still impossible?
DS_katauri said:
Well,v1 was discharging a bit faster,gonna try v2 today. A noob question,will it support dual sim revision of LG L7 ll? As i noticed there actually arent modern optimised kernels for dual sim. And a second one,overclock is still impossible?
Click to expand...
Click to collapse
The support for dual version of L7 II (P715) will do for v3, whether it is possible to overclock mmm .. it is a bit tricky to find no information processor using L7 II MSM8625 (Snapdragon 200) on how I'm testing it stable with changes kernels with HTC DESIRE X but I can not promise anything to reward the overclock I'm adding the best features for better device performance
chijure said:
Sorry my mistake is in v1 that is already fixed in V2 thanks
Click to expand...
Click to collapse
Thanks for you support.
Now used v2 but again ZRam no work, i tried with ZRam Settings and Kernerl Adiutor apps from Play Store. I need app in specific for ZRam enable?
Also only i see available some governors.
Sorry for the troubles and bad English, greetings from Mexico.
Enviado desde mi LG-P714 mediante Tapatalk
chijure said:
The support for dual version of L7 II (P715) will do for v3, whether it is possible to overclock mmm .. it is a bit tricky to find no information processor using L7 II MSM8625 (Snapdragon 200) on how I'm testing it stable with changes kernels with HTC DESIRE X but I can not promise anything to reward the overclock I'm adding the best features for better device performance
Click to expand...
Click to collapse
Actually Lg l7 II is using MSM8225 aka Snapdragon S4 Play

[kernel][6.0.1] berserk [18/7/16]

Code:
[COLOR="green"][B]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, dead cats,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will go
* #Berserk :D:D
*/[/B][/COLOR]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FEATURES:
Unlocked CPU frequency to 1.4GHz
Unlocked GPU frequency to 465MHz
Available CPU governors: adaptive, darkness, smartmax, elementalXv2, zzmoove, impulse, despair, lionfish, barry_allen, ondemand, bioshock, interactive and performance
Available I/O Schedulers: noop, deadline, row, sio, sioplus, vr, tripndroid, cfq, bfq, fiops, and zen
Available CPU hotplugs: mpdecision, zen decision, msm, mako, state helper and msm sleeper
Vibration intensity control
Faux sound control 3.6
Dt2w support
DriveDroid support
Multirom support
KCAL advanced color control
Fsync on/off support
Advanced TCP congestion algorithms: cubic, reno, bic, westwood, highspeed, hybla, htcp, vegas, veno, scalable, lp, yeah and illinois
Exfat 1.2.9 support
NTFS R/W support
State notifier
Adreno idler
HID USB Keyboard & Mouse support (Download this app )
USB fast charge
Optimized KSM
Frandom
for more check my github commits
INSTALLATION INSTRUCTIONS:
Download the zip file and save it into the root directory of internal/external storage
Reboot into recovery
Mount system, data and cache
Flash the zip and reboot(NO NEED TO WIPE CACHE AND DALVIK)
OPTIMAL SETTINGS:
Optimal settings for balanced performance and battery life:
CPU frequency:- 200MHz to 1.2GHz
GPU frequency:- 100MHz to 310MHz
CPU governor:- impulse/interactive anyone you wish
Hotplug:- zen decision
TCP:- Westwood
Vibration intensity:- 50%
KSM:- enabled
Screen:- set preset to DeepBlack Colorful[This is optional but it makes screen color crispy]
Optimal settings for performance during gaming:-
CPU frequency:- 400MHz to 1.4GHz
GPU frequency:- 100MHz to 465MHz
FAQs:
Q. what is the difference between your normal and jerrica builds?
A. normal build is based on official CM source and jerrica is based on premaca's official xiaomi source
Q. why CPU frequencies are not changing even after setting min and max values in kernel adiutor?
A. simple go to hotplugs, disable mpdecision and enable some other hotplug
Q. why is charging so slow?
A. sorry can't help I never faced this issue, even with stock cm13 kernel my device gets charged within 2hrs
one thing I can suggest is stick to a ROM for a week
by sticking to a ROM I mean don't even flash nightlies
Q. what is drivedroid?
A. DriveDroid is an Android application that allows you to boot your PC from ISO/IMG files stored on your phone.
more info here: http://softwarebakery.com/projects/drivedroid
Q. okay you have given us a balanced profile what about a battery oriented profile?
A. sorry, with the settings I have given above I already get 5-6hrs of SOT which is optimal for a 2200mAh battery, so if you are asking about a profile which will give about 7-8hrs of SOT stop dreaming.
CREDITS:
Thanks a lot to these super awesome developers from whom I kanged the features:
DespairFactor
neobuddy89
faux123
franciscofranco
ak
savoca
premaca
dorimanx
jcadduono
arter97
psndna88
myfluxi
osm0sis
pelya
flar2
zanezam
placiano
sultanqasim
jamison904
javilonas
Cl3Kener
bbedward
andip71
varunchitre15
imoseyon
FrozenCow
Thanks a lot to my awesome testers:
@Salahxda6805
@Zeus™
@shah2007
@Shubhamfame
@sumitkolhe37
@parvejsolkar
@HRS24X7
XDA:DevDB Information
Berserk Kernel, Kernel for the Xiaomi Redmi 2
Contributors
Ashish94, ketut.kumajaya
Source Code: https://github.com/AshishM94/android_kernel_wingtech_msm8916
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2016-07-18
Created 2016-02-28
Last Updated 2016-07-18
Review.
Here is my review after testing it for 3 days :
Selinux - Permissive (Doesn't break ViPER4Android /Sound mods)
All sensors work fine (Including Yas sensor)
Great Multitasking (Heavy Games like Asphalt8, MC-Blackout run smooth)
Overclocked to 1.4 Ghz.
Lots of Cpu Governers, Hotplugs & I/O schedulers to choose from.
Good Battery life (After all these features)
Undervolted, Powersuspend.
Can be used as Usb keyboard/mouse.
No Lag, No Overheating.
Latest Linux Version.
Overall this is the best kernel till date for all the marshmallow RoMs of Xiaomi Redmi 2.
With a these variety of governers and a lot other things, this kernel also provides good battery life(You cant expect more than this from a 2200 mAh device)
I would suggest this kernel to all the redmi 2 users who haven't tried it yet....
and at last its a great work from @Ashish94 (Considering its his first kernel, then its awesome! )
Zeus™ said:
Dowload Link ??
Click to expand...
Click to collapse
Download tab. Open link through chrome.
Sent from my 2014818 using Tapatalk
Gud kernel without lag and better battery and gud features nice work done bro @Ashish94 :thumbup::thumbup::thumbup::thumbup::thumbup:
---------- Post added at 04:47 PM ---------- Previous post was at 04:46 PM ----------
[/COLOR [MENTION=6952478 [user=6952478]@Ashish94[/user][/MENTION] it will be easy if ull add download link in description
Ashish94 said:
This is my "berserk kernel" for Redmi 2. It consists of all the latest changes from kumajaya's kernel sources and upstreamed linux kernel sources from kernel.org along with cherry-picks from some of the greatest xda kernel developers sources.....
Click to expand...
Click to collapse
finally a new kernel >>
>> the existing ones (GK, RR) break my favorite sound mod (EXTREMEMusic), so I got stuck with ImmortalKernel; which is good but lacks a lot of the features you included :good:
eager to test it!
(bliss 6.1; MM 6.0.1)
any redommended/suggested settings?
crullick said:
finally a new kernel >>
>> the existing ones (GK, RR) break my favorite sound mod (EXTREMEMusic), so I got stuck with ImmortalKernel; which is good but lacks a lot of the features you included :good:
eager to test it!
(bliss 6.1; MM 6.0.1)
any redommended/suggested settings?
Click to expand...
Click to collapse
These are my personal settings -
Cpu: 200mhz-1.2ghz
Governor: impulse
Hotplug: Intelliplug
Fsyncn
Dynamic fsync: on
Test and give your feedback.
Happy flashing [emoji1] [emoji1]
Sent from my 2014818 using Tapatalk
Charging slow or battery going from 15% to 0% in one second?
JoaoMarcos said:
Charging slow or battery going from 15% to 0% in one second?
Click to expand...
Click to collapse
Slow charging fast charging varies from user to user some are getting 1000mA and some are getting 500mA(including me). No such bug as going from 15-1% in 1sec.
Sent from my 2014818 using Tapatalk
Ashish94 said:
Slow charging fast charging varies from user to user some are getting 1000mA and some are getting 500mA(including me). No such bug as going from 15-1% in 1sec.
Sent from my 2014818 using Tapatalk
Click to expand...
Click to collapse
Okay. I'm asking because in Temasek CM13 with his kernel, I got these two annoying bugs. I was getting 50 mA in idle, with no CPU load :/
nice and good kernel with lots of features
Best kernel in Redmi 2
But i got stability issues, little lag when pulling notification qs and opening new app.
maybe because the sabermod toolchain
My setup
Gov : elementalx
boost interval : 10ms
input boost interval : 10ms
hotplug : intelliplug
io internal : fiops 128kb
io external : fiops 1024kb
ichihara.rifa said:
Best kernel in Redmi 2
But i got stability issues, little lag when pulling notification qs and opening new app.
maybe because the sabermod toolchain
My setup
Gov : elementalx
boost interval : 10ms
input boost interval : 10ms
hotplug : intelliplug
io internal : fiops 128kb
io external : fiops 1024kb
Click to expand...
Click to collapse
Okkk bro will tell the dev to look into it:thumbup:
ichihara.rifa said:
Best kernel in Redmi 2
But i got stability issues, little lag when pulling notification qs and opening new app.
maybe because the sabermod toolchain
My setup
Gov : elementalx
boost interval : 10ms
input boost interval : 10ms
hotplug : intelliplug
io internal : fiops 128kb
io external : fiops 1024kb
Click to expand...
Click to collapse
A little lag jitter will always be there irrespective of any kernel any rom you use. Try more tinkering with kernel settings and use the setting that suits you.
Thanks for your feedback. [emoji106] [emoji106]
Sent from my 2014818 using Tapatalk
The download link cannot be opened
Sent from my 2014817 using Tapatalk
Great Kernel works with aosp roms too.
are bhai @Ashish94 Download Kaise Karu ?? Where Link ?
omkarsnehal said:
are bhai @Ashish94 Download Kaise Karu ?? Where Link ?
Click to expand...
Click to collapse
Open thread with chrome or any other browser and go to downloads tab. Also no hindi please.
Sent from my 2014818 using Tapatalk
Wow cool!
Btw, how to restore stock kernel?
Thanks for your hard works, sir!
my573r10us said:
Wow cool!
Btw, how to restore stock kernel?
Thanks for your hard works, sir!
Click to expand...
Click to collapse
Did you make a backup of the old kernel?? If not open the zip package of your rom with winrar or any other compression software and extract boot.img from it. Now flash this boot.img with flashify or twrp. Done you are back to your old kernel.
Sent from my 2014818 using Tapatalk
some one plz upload link coz im not understand what he saying

[KERNEL][6.0.1][J5 2016][Linaro 6.3.1] Cherry Kernel

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards, corrupted partition, nuclear disasters
* Please do some research before using this mod!
* YOU are choosing to make these modifications,
* If you point the finger at me for messing up your device, I will laugh at you.​This kernel will overwrite your system modules​This kernel use Anykernel2 zip for maximum compatibility with all ROMs and your existing ramdisk
Do NOT flash this over other custom kernels!​ You should only flash Cherry kernel over the kernel that came with your ROM!!!...
VARIANTS SUPPORTED
J510FN
J510GN
J510MN
J510F​
KERNEL INFORMATION
Built with: Linaro Toolchain 6.3.1
Kernel Base: J510FNXXU1APJ3
Linux Version: 3.10.94
REQUIREMENTS
Sansung Galaxy J5 2016
Official Touchwiz stock rom 6.0.1
Stock kernel
TWRP
FEATURES
Kcal Color Control
Dynamic Fsync 2.0
Power Suspend 1.7
Quick Wake Up
USB Fast Charge
Disable Software CRC for 30% more performance
iosched (zen, vr, sio, sioplus, fiops, noop, cfq, deadline, row, bfq)
TCP Congestion algorithms
Westwood
Reno
Bic
Cubic
Highspeed
Hybra
Htcp
Vegas
Veno
Scalable
Lp
Yeah
Illinois
Prima Wlan Drivers 3.0.11.68
Frandom
Selinux Switchable
Kernel same-page merging (KSM)
Hotplug ( alucard, intelliplug, bricked hotplug, msmhotplug)
Governors (Alucard, Intelliactive, Barry Allen, interactive, ondemand, conservative, userspace, powersave, performance)
GPU overclocked to 720Mhz
CPU overclocked to 1881Mhz
Sound control 3.6
Intelli Thermal
CREDITS:
@Droidzone @The Sickness @faux123 @savoca@Franciscofranco@anarkia1976@Alucard@Bulgaricus@Lemlis
Click to expand...
Click to collapse
To do list:
Governors
Click to expand...
Click to collapse
DOWNLOAD
1.1.3 | 1.1.4
1.1.5_stock | 1.1.5_over​
J510FN Full support
J510FQ Untested
J510GN Verified
J510F Verified
J510G Untested
J510H tested
J510S Untested
J510K Untested
J510MN verified
J510L Untested
J5108 tested
J510Y Untested
XDA:DevDB Information
Cherry Kernel [J5 2016], Kernel for the Samsung Galaxy J5
Contributors
Demicro
Source Code: https://github.com/Demicro/SM-J510FN_KERNEL
Kernel Special Features:
Version Information
Status: Beta
Current Stable Version: 1.1.3
Stable Release Date: 2017-01-26
Current Beta Version: 1.1.5
Beta Release Date: 2017-04-02
Created 2017-02-20
Last Updated 2017-04-02
Changelog
XX/xx/2017 v1.1.6 beta version
Upgrade to linux 3.10.94 ----(*)-----
Wlan driver upgrade to 3.0.11.68 -----(*)-----
J5 2015 FN support -------(*)------
Updated ZRAM driver -----(*)-----
Updated F2FS driver -----(*)-----
08/04/2017 v1.1.5 beta version
Upgrade to linux 3.10.94
Enable triple framebuffer
Adreno Idler 1.1
GPU Bus Vector Optimization
More A53 ARMv8 optimizations
New Adreno Blobs drivers (3D performance)
Wlan driver upgrade to 3.0.11.68
init.d support
CM Live display alongside with kcal thanks to @flar2 ?
remove Knox
Android logger on/off
CPU and GPU overclock 1.4 Ghz 550 Mhz
toggle for wakelooks
Patched cdrom code (DriveDroid support)
zzmove governor
20/02/2017 v1.1.4 beta version
Upgrade to linux 3.10.62
XZ Kernel Compression
-Ofast Optimization
linaro 6.3.1
Governors
lionfish governor
alucard governor (LG G5 import)
intelliactive governor
IO schedule
BFQ
F2FS Support
Call Recording
Dynamic management of dirty page writeback
Asynchronous I/O latency to a solid-state disk greatly increased
Battery charge control
Fsync toggle on/off
Asynchronous Fsync (HTC)
Intelliplug 4.0
Intellithermal
Dynamic Fsync 2.0
CPU overclocked to 1401Mhz
Revert GPU OVERCLOCK to 400 The max frequency cap is ignored and is always 720 (bug)
LCD notify
26/01/2017 v1.1.3
GPU overclocked to 720Mhz
CPU overclocked to 1881Mhz
Sound control
Anykernel installer mod
- Added function to automatically find the boot partition
- Added properties file to modify build.prop
24/01/2017 v1.1.2
Upgrade to 3.10.50
Barry Allen governor
Hotplug (alucard, intelliplug, MSM hotplug, Bricked hotplug)
Demicro said:
??
Click to expand...
Click to collapse
Slow but sure, all J5 variant will get development!
Good job!
vaserbanix said:
Slow but sure, all J5 variant will get development!
Good job!
Click to expand...
Click to collapse
It saddens me a bit to see how this range of Samsung phones has little development. Despite my little knowledge of C and the difficulty I had when I started to build the kernel thanks to the guides of @Droidzone and @The Sickness I was able to compile it and thus to contribute a grain of sand in this section.
Demicro said:
It saddens me a bit to see how this range of Samsung phones has little development. Despite my little knowledge of C and the difficulty I had when I started to build the kernel thanks to the guides of @Droidzone and @The Sickness I was able to compile it and thus to contribute a grain of sand in this section.
Click to expand...
Click to collapse
keep it up and dont give up!
Color OS Galaxy J5
Good to see some love for the 2016 version ? keep it up!
Do this for J510H and J510F!
And I wait for overlock.
Do the fast charge works good?
waiting for j510gn . alrdy flash . all good except wifi ...
Demicro said:
[KERNEL][6.0.1][J510FN][Linaro 4.9] Cherry Kernel
Click to expand...
Click to collapse
Thank you for your work.J510FN-everything works.
(Small bug WI-FI .after turning of wi-fi,or after reboot --need to enter wi-fi password again.)
How to fix look here
wait for Overclock ,Hotplug (alucard, intelliplug, msm hotplug, bricked hotplug) ,Governors :good:
Wifi doesn't work!! Please help!
J5 2016 510FN
lemlis said:
Thank you for your work.J510FN-everything works.
Small bug WI-FI .after turning of wi-fi,or after reboot --need to enter wi-fi password again.
wait for Overclock ,Hotplug (alucard, intelliplug, msm hotplug, bricked hotplug) ,Governors :good:
Click to expand...
Click to collapse
The problem with Wi-Fi is because of the secure storage that makes Wi-Fi forget passwords, that does not happen with open networks
ro.securestorage.support=false
in /system/build.prop
Change the value to false to turn it off
RicardoArantes said:
Wifi doesn't work!! Please help!
J5 2016 510FN
Click to expand...
Click to collapse
Could you give me more information about the problem?
Demicro said:
ro.securestorage.support=false
in /system/build.prop
Change the value to false to turn it off
Click to expand...
Click to collapse
:good: Now wi-fi works great
Ruch06 said:
Do this for J510H and J510F!
And I wait for overlock.
Do the fast charge works good?
Click to expand...
Click to collapse
It is only for the J510FN version
I have not tested the fast charge yet
Demicro said:
Changelog
Version 1.1.2
Upgrade to 3.10.50
Barry Allen governor
Hotplug (alucard, intelliplug, MSM hotplug, Bricked hotplug)
Click to expand...
Click to collapse
:good: Works great
Demicro said:
*USB fast charge
Click to expand...
Click to collapse
Plz explain it . How fast we can charge ?
s10gopal said:
Plz explain it . How fast we can charge ?
Click to expand...
Click to collapse
This option allows some cheap chargers over 500ma to be recognized as AC chargers for faster charging.
itmesepulll01 said:
waiting for j510gn . alrdy flash . all good except wifi ...
Click to expand...
Click to collapse
You flash the kernel in your J510GN?
Demicro said:
You flash the kernel in your J510GN?
Click to expand...
Click to collapse
yup
itmesepulll01 said:
yup
Click to expand...
Click to collapse
Everything works well except Wi-Fi?

[CLOSED][KERNEL] [8.1.0 Oreo / 9.0.0 Pie] [4.9.135] [UBER 6.4.1] Sphinx Kernel - v1.7

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
Ahoy everyone,
I decided to share my personal custom kernel with all of you. The main reason i started developing this kernel is to balance performance / battery / security and also add features.
I believe i have included most of the usually requested features. If your feature is not included you can ask for it and i will try to include it as long as you don't ask for ETA's. I am a student and i do this on my spare time.
This kernel is based on LineageOS 16.0 sources for beryllium.
Moreover, it is compiled with UBER Toolchain which is based on latest gnu.org changes and patched with AOSP and Linaro Android patches for optimal performance/battery.
So let's jump to the interesting part!
Sphinx Kernel Features
Compiled with UBER Toolchain 6.4.1
Upstreamed to 4.9.135
Upstream Updates from CAF LA.UM.6.3.r4-05300-sdm845.0
Merged Latest Lineage 16.0 commits
Makefile Optimizations
WireGuard Support
Dynamic Stune Boost v3
CRC Check Disabled
Pass SafetyNet without Magisk / Root
Boeffla Wakelock Blocker
AdrenoBoost Support
MSM Touchboost
IR Camera for MIUI based Roms
New Square Root Algorithm
Support sdFAT Filesystem
Suport exFAT Filesystem
TTL Target
IP Mangle
Fsync Control
Disabled Gentle Fair Sleepers
Atheros 9 Wireless Cards Support
Kcal Advances Color Control
Vibration Control
LED Notification Control
USB Fast Charge up to 900 mAh
LZ4 Compression Algorithm by default
Backlight Minimum Brightness Control
Power Efficient Workqueues
mac80211 Injection (Kali Nethunter Support)
I/O Schedulers: Zen v2, Maple, Fiops, Sio, Noop, Deadline, Cfq,
TCP Congestion Algorithms (bic, cdg, cubic, westwood, htcp, hstcp, hybla, vegas, scalable, lp, veno, yeah, illinois)
Governors: Schedutil, Ondemand, Conservative, Usersapce, Powersave, Performance, blu_schedutil
Zipped up with AnyKernel2
Notes
I bear absolutely no responsibility. If you brick your device. If you are not sure what a kernel is, how to flash it or how to restore your phone in case something goes wrong then do NOT proceed.
Moreover, you should flash this kernel only over the stock kernel that came with your Rom.
Downloads - Version 1.7
Sphinx 1.7 : https://www.androidfilehost.com/?fid=11410932744536993761
/-----------------------------------------------------------------------------/
I have dedicated countless hours developing this kernel so if you like my work consider buying me a coffee to help me stay awake an keep improving Sphinx.
Click Here for Coffee
/-----------------------------------------------------------------------------/​
For Support, Updates, Questions, Releases regarding Sphinx join t.me/sphinx_kernel
Changelog
Sphinx v1.7
-Upstreamed to Linux Version 4.9.135
-Merged ext4 upstreamed commits
-Merged Lineage 16.0 Upstream commits
-Now Compiling with Uber Toolchain 6.4.1
-Added Zen v2 I/O Scheduler
-Added TCP Congestion Algorithms (bic, cdg, cubic, westwood, htcp, hstcp, hybla, vegas, scalable, lp, veno, yeah, illinois) default is cdg
-Improved msm_performance
-Enabled USB Fastcharge up to 900 mAh
-Added blu_schedutil
-Makefile Optimizations
-Added LED Notification Control
-Enabled LZ4 Compression Algorithm for Zram
-Now Sphinx comes Pre-Configured out of the box for balance
Previous Versions
Not Yet
Oh ,nice ,welcome my friend :highfive:
Version 1.7
Ahoy Ladies and Gentlemen.
Time for new version!
Changelog:
1) Upstreamed to Linux Version 4.9.135 - Better Security / Stability / Performance
2) Merged ext4 upstreamed commits - Better System Performance
3) Merged Lineage 16.0 Upstream commits - Better Stability / Battery / Performance
4) Now Compiling with Uber Toolchain 6.4.1 - Better Battery/System Performance
5) Added Zen v2 I/O Scheduler - Better I/O Performance
6) Added TCP Congestion Algorithms (bic, cdg, cubic, westwood, htcp, hstcp, hybla, vegas, scalable, lp, veno, yeah, illinois) default is cdg - Better Internet Performance
7) Improved msm_performance - Better Performance
8) Enabled USB Fastcharge up to 900 mAh - Note (1)
9) Added blu_schedutil - Note (2)
10) Makefile Optimizations - Better Performance
11) Added LED Notification Control- Note (3)
12) Enabled LZ4 Compression Algorithm for Zram - Better Battery / Performance
13) Now Sphinx comes Pre-Configured out of the box for balance
14) Support F2FS File System - If Rom Supports it -
Notes:
Note 1: This is USB Fast Charge which means it works ONLY when you charge from a computer. The default output was 500 mAh and now it's 900 mAh (which is the maximum a usb port can support)
Note 2: This is a new EAS Governor ported from blu_spark Kernel for OnePlus 6. Currently it is almost the same with the schedutil governor from Pixel 3
Note 3: Many of you made some comment about the LED Notification being brighter etc. Now you can configure it yourself. THOUGH there is not interface for that in ANY App, you need to do it yourself.
Specifically:
Code:
* /sys/class/leds/white/device/led_fade (rw)
0 : blink
1 : fade (default)
* /sys/class/leds/white/device/led_intensity (rw)
0 : stock intensity
1-100 : 0% to 100% of stock intensity
Note: Does only work for static led, not fading/blinking !!!
* /sys/class/leds/white/device/led_speed (rw)
0 : stock speed
1 : continuous notification light
2-12 : 2 = very slow to 20 = very fast
I have listened to your requests to bring Sphinx to Poco and did everything in my powers to satisfy most of you and ensure this version is stable so if you enjoy this version don't forget to buy me a coffee
Cheers :highfive:
No download link?
vodkinagdan said:
No download link?
Click to expand...
Click to collapse
uploading
milouk said:
uploading
Click to expand...
Click to collapse
Great. We really need ExFat support
Fat32 killing big microsd
Отправлено с моего Poco F1 через Tapatalk
Moderator please delete this thread as i have moved here https://forum.xda-developers.com/poco-f1/review/kernel-sphinx-kernel-v1-7-t3861911
Booted fine , what app do you suggest for kernel "tweaking" ?
Thread Moved
This Thread has been moved here https://forum.xda-developers.com/poco-f1/review/kernel-sphinx-kernel-v1-7-t3861911
Foourck yesssss ? you are in the Poco team ???? really really looking forward to your awesomeness on the S845 ??.
Introduction post looks AWESOME, this is what I've been waiting for - great kernel. Flashing right away.
Congratulations kernel first impressions is awesome.
Enviado desde mi Poco F1 mediante Tapatalk
Dear Dev, First of all, I wanna say thanks for this amazing kernel! Its working perfectly on my phone. 1 question, do you think overclocking will be included? This would be great
Like SD845 to 3 Ghz or something, Thanks again for your hard work man! Much appreciated!
idontknowausername said:
Dear Dev, First of all, I wanna say thanks for this amazing kernel! Its working perfectly on my phone. 1 question, do you think overclocking will be included? This would be great
Like SD845 to 3 Ghz or something, Thanks again for your hard work man! Much appreciated!
Click to expand...
Click to collapse
Hey man. The thread is moved. Please ask your question there
It's double thread I think. This one must be deleted. The other one is already "alive" with many conversation on it.
Sent from my Poco F1 using Tapatalk
sanzNya said:
It's double thread I think. This one must be deleted. The other one is already "alive" with many conversation on it.
Click to expand...
Click to collapse
I know i have pmed a mod about it.
Thread closed.

Categories

Resources