Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* and make sure you are not drunk before using this
Features:
Mounts System, Data and everything
Wiping works
Format works
Keys, power button works
Full stable
Downloads:
Click here to download ClockWorkMod Recovery for Core Prime
How To Flash it:
Download the recovery
Open Odin 3.09
Select Recovery.tar.md5 and Select Start
wait until it finish
Reboot to recovery
Enjoy
nice for core prime
Dreamstar said:
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* and make sure you are not drunk before using this
Features:
Mounts System, Data and everything
Wiping works
Format works
Keys, power button works
Full stable
Downloads:
Click here to download ClockWorkMod Recovery for Core Prime by Dreamstar
How To Flash it:
Download the recovery
Open Odin 3.09
Select Recovery.tar.md5 and Select Start
wait until it finish
Reboot to recovery
Enjoy
Credit:
AvinabaDalal
Andii Pratama
Click to expand...
Click to collapse
Does it work on G360BT?
Sent from my SM-G360BT using XDA-Developers mobile app
sorry its only for core prime G360H
[RECOVERY] Stability and Compatibility
Dreamstar said:
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* and make sure you are not drunk before using this
Features:
Mounts System, Data and everything
Wiping works
Format works
Keys, power button works
Full stable
Downloads:
Click here to download ClockWorkMod Recovery for Core Prime by Dreamstar
How To Flash it:
Download the recovery
Open Odin 3.09
Select Recovery.tar.md5 and Select Start
wait until it finish
Reboot to recovery
Enjoy
Credit:
AvinabaDalal
Andii Pratama
Click to expand...
Click to collapse
OP... Which is better in terms of the CUSTOM ROM you're currently working on: TWRP or CWM (for Core Prime SM-G360HU)?
Thanks in Advance! :good:
AndioAngeles said:
OP... Which is better in terms of the CUSTOM ROM you're currently working on: TWRP or CWM (for Core Prime SM-G360HU)?
Thanks in Advance! :good:
Click to expand...
Click to collapse
Both are Good And Yes Its Working On G360HU
Working on G360H. Thanks a lot.
thanx for your attention for g360h
now just custom rom will be use fyl or custom systemui
Sent from my SM-G360H using Tapatalk
Dreamstar said:
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* and make sure you are not drunk before using this
Features:
Mounts System, Data and everything
Wiping works
Format works
Keys, power button works
Full stable
Downloads:
Click here to download ClockWorkMod Recovery for Core Prime by Dreamstar
How To Flash it:
Download the recovery
Open Odin 3.09
Select Recovery.tar.md5 and Select Start
wait until it finish
Reboot to recovery
Enjoy
Credit:
AvinabaDalal
Andii Pratama
Click to expand...
Click to collapse
How to fort CWM and Twrp sc8830 spreadtrum i'm Vietnamese
Anyone tried this on the Cricket variant G360AZ?
V.V. very thanks
Dreamstar said:
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* and make sure you are not drunk before using this
Features:
Mounts System, Data and everything
Wiping works
Format works
Keys, power button works
Full stable
Downloads:
Click here to download ClockWorkMod Recovery for Core Prime by Dreamstar
How To Flash it:
Download the recovery
Open Odin 3.09
Select Recovery.tar.md5 and Select Start
wait until it finish
Reboot to recovery
Enjoy
Credit:
AvinabaDalal
Andii Pratama
Click to expand...
Click to collapse
so thanks for this recovery great work
I supposed that this thread isn't available for SM-G360F, right? xd
smg360v dead
Hi everyone, i have a core prime smg360v, )the verizon version= i was trying a lot of things to unlock the bands, but wasnt succesfull, in the last try, i tried to flash a Kernel, and now my phone is dead, it doesnt turn on , nothin, NO ACTIVITY, any suggestion of what can i do to recover my phone
if you can go to download mode
just flash stock rom via odin
Sent from my SM-G360H using XDA Free mobile app
SM-G361F???
Does this work with g361f??
Why nobody done anything for the g361f model
Any working recovery. I flashed a
Twrp and it keeps saying recovery is not seandroid enforcing
No its just for g360h
Sent from my SM-G360H using XDA Free mobile app
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> CWM.tar.md5 is invalid.
<OSM> End...
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> CWM.tar.md5 is invalid.
<OSM> End...
How do I get this working, it says it is invalid. Someone help me?
@Wishi123 Use TWRP recovery by @Dreamstar. It is better. Check Google for difference.
itsmedRb said:
@Wishi123 Use TWRP recovery by @Dreamstar. It is better. Check Google for difference.
Click to expand...
Click to collapse
Can i flash it over twrp?? Using twrp?
@anonymous94 said:
Can i flash it over twrp?? Using twrp?
Click to expand...
Click to collapse
nope. Its not a zip flashable file. use odin
Related
Moto X Flashable zip of Rogers (Canada) 139.12.36.ghost_row.RCI.en.CA build
Code:
#include <std_disclaimer.h>
/*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
It is the same build as after installing OTA update for Rogers (Canada) with improved camera.
This is a flashable zip of the system and boot.img. All other partitions (bootloader, modem, logo etc.) will NOT be modified.
It have to be installed (flashed) in CWM or TRWP - this mean that unlocked bootloader is required.
How to install:
1. Make full backup in CWM or TRWP of your current ROM
2. Wipe dalvik cache and cache in recovery
3. Flash 139.12.36.ghost_row.RCI.en.CA.zip in CWM or TRWP
4. Flash Patch-139.12.36.ghost_row.RCI.en.CA.zip in CWM or TRWP
5. Reboot
What is doing during installations:
1. Format system partition
2. Copy system files to system partition
3. Flash boot.img
This means that your data, bootloader, modem, logo etc. remain not modified
Download:
139.12.36.ghost_row.RCI.en.CA.zip (432.1 MB)
Patch-139.12.36.ghost_row.RCI.en.CA.zip (6.8 MB)
Deodexed ROM (thanks to skiwong20): https://docs.google.com/file/d/0B9qC3vvamytkd3ZoZUs1RlRTUkU/edit?usp=sharing
md5: ec2a0c6229a5ed7270d5df36acc2881c
Al936 said:
Moto X Flashable zip of Rogers (Canada) 139.12.36.ghost_row.RCI.en.CA build
Code:
#include <std_disclaimer.h>
/*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
It is the same build as after installing OTA update for Rogers (Canada) with improved camera.
This is a flashable zip of the system and boot.img. All other partitions (bootloader, modem, logo etc.) will NOT be modified.
It have to be installed (flashed) in CWM or TRWP - this mean that unlocked bootloader is required.
How to install:
1. Make full backup in CWM or TRWP of your current ROM
2. Wipe dalvik cache and cache in recovery
3. Flash in CWM or TRWP
4. Reboot
What is doing during installations:
1. Format system partition
2. Copy system files to system partition
3. Flash boot.img
This means that your data, bootloader, modem, logo etc. remain not modified
Download: 139.12.36.ghost_row.RCI.en.CA.zip (432.1 MB)
Click to expand...
Click to collapse
Thumb up!
I have rooted and do I need to do the unroot before flashing it? Is it any way to keep root after flashing?
chrisjenho said:
I have rooted and do I need to do the unroot before flashing it? Is it any way to keep root after flashing?
Click to expand...
Click to collapse
You do not need to unroot before flashing. If you have CWM or TRWP it is easy to root after flashing.
chrisjenho said:
Thumb up!
I have rooted and do I need to do the unroot before flashing it? Is it any way to keep root after flashing?
Click to expand...
Click to collapse
If you have twrp, it asks after flashing if you want to root and install su
Al936 said:
You do not need to unroot before flashing. If you have CWM or TRWP it is easy to root after flashing.
Click to expand...
Click to collapse
I try this but wifi doesn't work, home key doesn't work. Do I wipe all helps? Or you can make a rom has full wipe Script?
Send from my Moto X
chrisjenho said:
I try this but wifi doesn't work, home key doesn't work.
Click to expand...
Click to collapse
Sorry, looks like there is mistake in the rom - I will post update soon.
Al936 said:
Sorry, looks like there is mistake in the rom - I will post update soon.
Click to expand...
Click to collapse
I have a working home key, but WIFI fails to start as well.
A quick logcat view:
Wifistatemachine: Failed to load driver!
Wifistatemachine: DriverFailedState
Al936 said:
Sorry, looks like there is mistake in the rom - I will post update soon.
Click to expand...
Click to collapse
Please try to flash this patch (just after rom flashing): Patch-139.12.36.ghost_row.RCI.en.CA.zip (6.8 MB). And report here
I flashed this rom and then the patch, and everything works great.
FligMupple said:
I flashed this rom and then the patch, and everything works great.
Click to expand...
Click to collapse
Thanks! OP updated.
Sorry guys, i know that this isnt the place, but can anyone help how to update mine using this update: fastboot-ghost_retbr-user-4.2.2-13.9.0Q2.X-116-LCX-35-36-release-keys-cid12-Brasil-BR.tar.gz and files as attached? Dunno more where to look or who to asks!Thanks!
Nice job , flashed it and it works perfect , wifi work , camera quality IS better ...but the auto focus take longer to adjust now
The voice call is so much better
Sa sens le Rooting icite !!
Al936 said:
Sorry, looks like there is mistake in the rom - I will post update soon.
Click to expand...
Click to collapse
Hey buddy, any ideas to remove the carrier's name on left top?
here is a deodex version of this for you guys
rom: https://docs.google.com/file/d/0B9qC3vvamytkd3ZoZUs1RlRTUkU/edit?usp=sharing
md5: ec2a0c6229a5ed7270d5df36acc2881c
Al936 said:
Sorry, looks like there is mistake in the rom - I will post update soon.
Click to expand...
Click to collapse
Do you update the original rom or just update the patch?
I download the patch and it doesn't solve the problem.
Home key/control panel are not working.
---------- Post added at 02:04 AM ---------- Previous post was at 01:43 AM ----------
chrisjenho said:
Do you update the original rom or just update the patch?
I download the patch and it doesn't solve the problem.
Home key/control panel are not working.
Click to expand...
Click to collapse
Active display/Twist camera are not working.
chrisjenho said:
Do you update the original rom or just update the patch?
I download the patch and it doesn't solve the problem.
Home key/control panel are not working.
---------- Post added at 02:04 AM ---------- Previous post was at 01:43 AM ----------
Active display/Twist camera are not working.
Click to expand...
Click to collapse
Yes it was fixed but are you restoring your data after you flash the ROM? Had the same issue when I flashes the T-Mobile ROM and restored my data through recovery. If so, do a clean install
Sent on my Moto X
flashallthetime said:
Yes it was fixed but are you restoring your data after you flash the ROM? Had the same issue when I flashes the T-Mobile ROM and restored my data through recovery. If so, do a clean install
Sent on my Moto X
Click to expand...
Click to collapse
the flashable rom is out and I downloaded once and wifi/control panel/etc. do not work.
I just follow the instruction to do this and have't restored my data. Even I flashed the patch.
So I wonder if the flashable zip is modified because I am using the original one from this post.
Maybe I need a zip same as the XML.kind but it can be flashable. All I need to do is full wipe and flash the zip.
Don't know why my computer can't use rsd to do this with "1/16 usb error while reading/writing".
Camera update seems great and stability is all I need.
chrisjenho said:
the flashable rom is out and I downloaded once and wifi/control panel/etc. do not work.
I just follow the instruction to do this and have't restored my data. Even I flashed the patch.
So I wonder if the flashable zip is modified because I am using the original one from this post.
Maybe I need a zip same as the XML.kind but it can be flashable. All I need to do is full wipe and flash the zip.
Don't know why my computer can't use rsd to do this with "1/16 usb error while reading/writing".
Camera update seems great and stability is all I need.
Click to expand...
Click to collapse
I assume your boot loader is unlocked and you're not using pwnmymoto? Factory reset, wipe dalvik and cache and flash again, problem could be is there's minor differences between each carriers ROM which causes frozen and non working apps and settings. To restore your data just use either titanium or ROM toolbox
Sent on my Moto X
Deleted
skiwong20 said:
he has a locked bootloader.
Click to expand...
Click to collapse
Well that explains everything
Sent on my Moto X
Moto X Flashable zip of AT&T 139.12.54.ghost_att.ATT.en.US build
Code:
#include <std_disclaimer.h>
/*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
It is the same build as after installing recent OTA update for AT&T with improved camera.
This is a flashable zip of the system and boot.img. All other partitions (bootloader, modem, logo etc.) will NOT be modified.
It have to be installed (flashed) in CWM or TRWP - this mean that unlocked bootloader is required.
How to install:
1. Make full backup in CWM or TRWP of your current ROM
2. Wipe dalvik cache and cache in recovery
3. Flash in CWM or TRWP
4. Reboot
What is doing during installations:
1. Format system partition
2. Copy system files to system partition
3. Flash boot.img
This means that your data, bootloader, modem, logo etc. remain not modified
Download: 139.12.54.ghost_att.ATT.en.US.zip (427.3 MB)
Deodexed ROM (thanks to skiwong20): https://docs.google.com/file/d/0B9qC3vvamytkbjB4N0hDTTlBQXM/edit?usp=sharing
md5: 5d614b8fd02fcd6862ca24fcfde14e59
Al936 said:
Moto X Flashable zip of AT&T 139.12.54.ghost_att.ATT.en.US build
Code:
#include <std_disclaimer.h>
/*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
It is the same build as after installing recent OTA update for AT&T with improved camera.
This is a flashable zip of the system and boot.img. All other partitions (bootloader, modem, logo etc.) will NOT be modified.
It have to be installed (flashed) in CWM or TRWP - this mean that unlocked bootloader is required.
How to install:
1. Make full backup in CWM or TRWP of your current ROM
2. Wipe dalvik cache and cache in recovery
3. Flash in CWM or TRWP
4. Reboot
What is doing during installations:
1. Format system partition
2. Copy system files to system partition
3. Flash boot.img
This means that your data, bootloader, modem, logo etc. remain not modified
Download: 139.12.54.ghost_att.ATT.en.US.zip (427.3 MB)
Click to expand...
Click to collapse
Thanks! So we can flash this on top of our existing rooted AT&T phone using Safe Strap after clearing cache and dalvik cache?
just created a slot and installed. I assume this will not be rooted and can't be since the patch was applied to block pwnmymoto.
I can't get wifi to work though. going to disable wifi on stock slot to see if that works the next time.
so the second flash on rom slot 1 with wifi disabled on stock before flashing didn't change the outcome. Looks like it would work great if wifi would work but the rooting thing i'm concerned about. What would be the outcome to install this over the stock rom?
mj0528 said:
just created a slot and installed. I assume this will not be rooted and can't be since the patch was applied to block pwnmymoto.
I can't get wifi to work though. going to disable wifi on stock slot to see if that works the next time.
so the second flash on rom slot 1 with wifi disabled on stock before flashing didn't change the outcome. Looks like it would work great if wifi would work but the rooting thing i'm concerned about. What would be the outcome to install this over the stock rom?
Click to expand...
Click to collapse
all u need to do is flash a SuperSu zip..i would google for one. i am sorry i got no link for u
---------- Post added at 07:34 PM ---------- Previous post was at 06:35 PM ----------
Alright i have deodexed this ATT stock rom as promised. please op can you add to your post..thanks.
rom: https://docs.google.com/file/d/0B9qC3vvamytkbjB4N0hDTTlBQXM/edit?usp=sharing
md5: 5d614b8fd02fcd6862ca24fcfde14e59
here is SupserSu zip thanks to Chainfire
http://download.chainfire.eu/204/SuperSU/CWM-SuperSU-v0.94.zip?retrieve_file=1
Still no wifi
Sent from my XT1058 using XDA Premium 4 mobile app
Finally got it with the steps from the T-Mobile ROM but it runs a little on the laggy side
Sent from my XT1058 using XDA Premium 4 mobile app
---------- Post added at 03:52 AM ---------- Previous post was at 03:15 AM ----------
I guess being the test subject doesn't pay off. What a mess I keep having! After several reboots on customizing, I got the normal boot loops. 30 min later after erasing user data and restoring from a twrp backup and it failing. It surprisingly booted. Safe strap is beta for a reason I suppose. I'm staying away for now!
Sent from my XT1058 using XDA Premium 4 mobile app
---------- Post added at 04:26 AM ---------- Previous post was at 03:52 AM ----------
Just read that unlocked bootloader is required. Poop! Can we get one cooked for safestrap?
Sent from my XT1058 using XDA Premium 4 mobile app
---------- Post added at 04:35 AM ---------- Previous post was at 04:26 AM ----------
Can I get a hookup of a AT&T safestrap rom?
Sent from my XT1058 using XDA Premium 4 mobile app
WiFi still doesn't work, so I guess it is a problem with the ROM and not SS. SS has been updated to fix WiFi, and I tested it to be sure WiFi worked.
On the bright side, flashing the SuperUser zip does give you root, so once WiFi is fixed, this will be an easy way to get the upgrade and still have root. Messing with OTA RootKeeper is too iffy, IMO.
***How To ROOT 4.3 & NC4 OTA, Install Recovery & Roms - Verizon RETAIL Note 3***
* * * What you do with your device is completely your choice and solely your responsibility! - If You READ These Instructions FIRST, THEN Follow Them, You Will Be Up And Running In No Time * * *
EVERYTHING You Need To Root, Install SafeStrap, Update SuperSU, Flash Custom 4.3 Roms, Flash In ODIN On 4.3 Jelly Bean RETAIL NOTE 3 ! ! !
To UPDATE from Custom 4.3 JB to 4.4.2 KK (NC2 Leak) go to
How To Update From JB 4.3 To KK 4.4.2 On Verizon RETAIL NOTE
To Root, Install Safestrap, Flash Cust Rom AFTER taking Official NC4 OTA:
Go To Bottom Of OP
This is a compilation of instructions that I used on my SM-N900V Verizon Note 3... This process was BY FAR the EASIEST I've ever used!
* * *Verified Knox 0x0* * * developer option (click 'BASE Version' in 'About Phone' 7 times to UNHIDE Developer Option) also verify UNKNOWN SOURCES is CHECKED & Verify Apps is Unchecked in system settings>security[/B][/COLOR][/I].
On PC, go to CONTROL PANEL > Install/Uninstall Programs > uninstall ALL Samsung drivers
Download & Install Samsung Drivers To Your PC
Samsung USB drivers (click “see all downloads”)
* * * ATTN: PRIOR to flashing a Rom built on MJE update, you should be running MJE (take OTA update or install MJE tar via Odin) then reroot via Kingo/Vroot, install Safestrap * * *
EASY Steps To Update To MJE: (Factory Stock)
- Download MJE tar file from Beanstown106's Firmware Collection Thread
- Flash MJE tar in Odin (for added safety, REMOVE sdcard) For DETAILED Odin instructions click HERE
- Reboot
- Go To Install Kingo (Google Kingo root 1.1.5 or 1.1.6 download) or Vroot (Google Vroot)
FOR ROOT PRIVILEGES- Install KINGO/Vroot
***Kingo 1.2 is having issues Rooting MJE Firmware, Google Kingo 1.1.5 or .6 OR see HERE, OR use Vroot***
I used the Kingo root app - links to Kingo are not currently allowed on XDA but it's very easy to search and find. It's just like a "one click" toolkit - meaning it's a no-brain operation. Download the app and follow the instructions. Currently Kingo & Vroot are the only known methods to root the MJ7/MJE builds for the Verizon Note 3 so it's one of these or no root for you. IF ROOT FAILS, KEEP TRYING (it took me 3 attempts)
TIP- make sure display timeout is set for 10 minutes & temporarily disable PC anti-virus (thanks RypeDub for the catch)
***If Kingo fails to root your device after several attempts: Try Vroot (some users reported success with Vroot after Kingo failed ROOT)
INSTALL SAFESTRAP RECOVERY (NO LONGER SUPPORTED BY HASHCODE)
Once you're ROOTED head over here: [RECOVERY LOCKED] Safestrap Recovery & download the latest APK see BELOW for which version. Open the Safestrap app in your app drawer and install the app, then open Safestrap and click "install recovery" in the app (The following directions are from Safestrap OP).
Safestrap 3.65 is last STABLE 4.3 JB version, 3.72 is for KK w/o rom slot support, 3.75 is Beta and is for KK w/ rom slot support
HOW TO UPGRADE SAFESTRAP
*To REVERT from newer version to older version, follow same steps swapping old file for new file*
-Push the APK to your sdcard (get latest SS.apk HERE)-THX Hashcode!
-Boot back into the "stock" rom-slot.
-OPEN your old Safestrap app and hit the "Uninstall Recovery" button
-THEN, open a "file explorer" (even TW "My Files" will work)
-Browse to where you pushed the New / old APK
-Click on it and install like a normal app (if install not successful, UNINSTALL old Safestrap app like any other app, THEN install new SS.apk)
-Once installed, open the SS APK
-Grant SU access
-THEN hit "Install Recovery" button
All set, now you can reboot and re-activate whatever rom-slot you were using
INSTALLING CHAINFIRE'S SUPERSU OVER KINGO SUPERSU
Next install a trusted, open source SuperSU app on your device since the Kingo root method is closed source (optional, but highly recommended). Download the latest SuperSU zip - instructions in Chainfire's XDA Thread (download to sd card or from PLAY).
Reboot your device (DO NOT REBOOT INTO RECOVERY), at the Safestrap splash screen - choose "Recovery"... Once in Safestrap, go to your stock rom slot by clicking "Boot Options" and ensuring it says "stock slot" in RED at the top of the screen. If it says anything other than stock, tap the stock slot button and click "activate" on the following page. Hit back to return to the Recovery main menu. Once confirmed you're on your stock slot, tap install and flash the new SuperSU zip (no wipes necessary). Once that's done, tap reboot system.
ROOT Privileges ONLY
If you ONLY want root privileges and NOT the recovery or the ability to flash ROMS, you can UNINSTALL Safestrap after flashing SuperSU, you will ONLY have root privileges: ***NO recovery and NO ability to flash ROMS*** After flashing SuperSU, reboot, choose "Continue" at splash screen, find Safestrap app in App Drawer and uninstall like any other app.
You're now completely done updating to MJE, Rooting your device, adding a stable Recovery & installing a trusted SuperSU application. Now, enjoy installing ROMs using Safestrap [SS]
***NOTE: When rebooting your device, you have to option to CONTINUE to your current ROM, or enter RECOVERY (Safestrap) after several seconds CONTINUE is the default action. If you are booting to your STOCK Slot you will see SAFESTRAP DISABLED this is NORMAL. When booting to slots 1-4 you will see SAFESTRAP ENABLED this is also NORMAL***
CREATING VIRTUAL ROMS SLOTS *NOT SUPPORTED IN SS 3.72 YET*
1. Reboot Device
2. Select Recovery at SS splash screen
3. Select Boot Options
4. Select one of the rom slots [1-4]
5. Adjust partition sizes if necessary [The average user can leave the partitions as is, if you are an app intensive user, increase DATA partition up to 4 gb MAX]
*NOTE: the larger you make the partitions of a Rom Slot, the less room you will have for remaining slots)
6. Select the Create ROM button (takes a minute)
7. Once the ROM slot has been created, browse back to BOOT OPTIONS.
8. Ensure the Rom Slot you want to flash is highlighted in GREEN at top of screen
9. Select Install
10. Browse to the ROM .zip you downloaded
11. Reboot
SWITCHING BETWEEN ROM SLOTS
1. Reboot Device
2. Select Recovery at SS splash screen
3. Select Boot Options
4. Select the Rom Slot you want to activate
5. Select Activate
6. Confirm the Rom Slot you just Activated shows at top of screen (GREEN for slots 1-4, RED for Stock Slot)
7. Browse back to Menu
8. Select Reboot
How To Flash Daily Driver Into Stock Rom Slot
1. Back up Stock Rom in Stock Slot to sdcard (optional)
2. Restore back up Stock Rom to open ROM slot 1-4 (optional)
3. Boot from restored slot to ensure functionality (optional)
4. Factory Reset for a clean install OR if upgrading same Rom you can DIRTY FLASH by clicking ADVANCED WIPE: check dalvik, cache, system (remember no dev support for "dirty flash")
5. Flash/Restore Daily Driver Rom to Stock Slot (Read the warning about flashing onto Stock Rom Slot, then forget about it
To Have Access To ALL Your Device Storage (FREE UP STORAGE) Go To Step 6
6. Delete un-used ROM slots 1-4 (you can only delete a ROM from the activated slot, the empty, unactivated slot remains)
7. Boot into Rom on Stock slot
8. Enjoy.This will give you access to ALL of your device's storage capacity (remember when booting into stock slot, Safestrap will say DISABLED, this is normal)
A Few Things To Consider When Using Multiple Rom Slots:
You can flash roms in slots 1-4 and stock slot. Activate whichever slot you'd like to boot to the next time, and your specific rom to upgrade, test, whatever comes up at boot. Ready to switch back to another rom, activate THAT rom slot, reboot to your next rom...This is the TRUE MAGIC of Safestrap; Daily driver in stock slot, test Rom in slot 1, Stock Rom in slot 2, boot into ANY rom simply by activating THAT rom slot!
Realize each rom slot has a max limit for data partition and system partition. If you are an app intensive user or like seeing an accurate reading of your internal and ext storage, I'd reco putting your daily driver on the stock slot (backup stock rom, keep on sdcard, flash daily driver in stock slot)...
If you like running multiple roms (skip step 5 above), when you activate a rom on slots 1-4, your int and ext memory will NOT read accurately, and you will be limited on how much storage you have on each slot. Use File Manager (ES File Explorer) if you want/need an accurate reading of remaining storage
Flashing your DD on the stock slot gives you access to ALL the int and ext memory, and ALL memory is properly reported.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
IF YOU ARE ON NC4 (Official VZW OTA) Follow The Below Instructions(courtesy of barrackobama)
WHAT YOU DO WITH YOUR DEVICE IS COMPLETELY YOUR OWN RESPONSIBILITY
Step- 1 - Root Device with TowelRoot courtesy of geohot
Step- 2 - Install Busybox from play store and install busybox itself
Step- 3 - Install Safestrap 3.75 courtesy of Hashcode (NO LONGER SUPPORTED BY HASHCODE)
Step- 4 - Boot into Safestrap, Select Stock Slot
Step- 5 - Wipe Data, Use Factory Reset Slider
Step- 6 - Install the latest Alliance ROM courtesy of the Alliance Crew
Step- 7 - Reboot into Download mode From Safestrap (DON'T hit reboot, hit back arrow twice, hit REBOOT, choose DOWNLOAD)
Step- 8 - Unzip & Install In ODIN This NC2 Kernel .tar courtesy of Beanstown106
XDA user barrackOBAMA confirmed these instructions work!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
The Brilliant Magic That Allows Fast, Easy Access To Multiple Roms With A Simple Reboot
Hashcode's [RECOVERY LOCKED] SafeStrap:
Roms I've Had Great Experiences With
Beantown106's [ROM][4.3][MJE]Jelly 'Beans' AOSP/KitKat
Alliance Crew's [ROM] AllianceROM
nitroglycerine33's [ROM] Eclipse AOSP
sbreen94's [ROM][4.3] Hyperdrive
Brandonrz's [ROM]-N.E.O.N. R.O.M
Helps & Guides
DutchDogg54's Firmware / Guide
Beanstown106's [Firmware][Collection] Modems, kernels, Stock Tars
Remember to SUPPORT THE DEVS who allow you to enjoy your ROOTED, Custom N3!
Please click THANKS and RATE this thread if it was helpful! Thanks!
az_biker said:
I couldn't find any links or threads with ALL the instructions in one place (ROOT, Safe Strap, Rom), so I compiled a list of instructions that I used on my SM-N900V Verizon MJ7 Note 3... This process was BY FAR the EASIEST I've ever used! * * *Verified Knox 0x0* * *
*** this is NOT my original work...(credit to DutchDogg54 and others)... IF any of this is YOUR work please let me know so I can give credit where it is due. Again, this is NOT my original work***
I used the Kingo root app - links to Kingo are not currently allowed on XDA but it's very easy to search and find. It's just like a "one click" toolkit - meaning it's a no-brain operation. Download the app and follow the instructions. Currently Kingo & vroot are the only known methods to root the MJ7 build for the Verizon Note 3 so it's one of these or no root for you. IF ROOT FAILS, KEEP TRYING (it took me 3 attempts)
Once that's done head over here: [RECOVERY LOCKED/MI9,MJ7] Safestrap Recovery v3.65 [2013-11-13 STABLE] & download the latest version of the APK then install it. Open the Safestrap app in your app drawer and install the recovery by clicking "install" within the app.
Next it's advisable to get a trusted & open source Super User app on your device after using the closed source Kingo root method (optional, but highly recommended). Download the latest SuperSU zip - Google search latest version. .
Reboot the phone and you'll come to the SafeStrap splash screen - choose "recovery." Once here, go to your stock rom slot by clicking "Boot Options" and ensuring it says "stock slot" in red at the top of the screen. If it says anything other than stock, tap the stock slot button and click "activate" on the following page. Hit back to return to the recoveries main menu. Once confirmed you're on your stock slot, tap install and flash the SuperSU zip (no wipes necessary). Once that's done, tap reboot system.
You're now completely done updating to MJ7, Rooting your device, adding a stable Recovery & installing a trusted Superuser application. Now, enjoy To install ROMs, you do that using SafeStrap [SS]
1. Reboot phone
2. Click Recovery Button when SS splash screen pops up
3. Click one of the rom slots [1-4] then click the Create ROM button [I left default values to test out the ROM. People say that its fine for most, but adjust date portion of partition if you use lots of apps]
4. Once the ROM slot has been created, browse back into the previously created slot.
5. Click Activate
6. Then click Install
7. Browse to whatever ROM .zip you download
8. Done
How to change your primary Stock ROM:
I made Beans my primary ROM.
1. Backed up Stock Slot
2. Restored back up to open ROM slot
3. Booted from restored slot to ensure functionality
4. Backed up Beans ROM
5. Restored Beans backup to Stock slot
6. Deleted un-used ROM slots [Stock and Beans in ROM slot 1-4] You can only delete a ROM from the slot, the empty slot remains
7. Booted into Beans on Stock slot
8. Re-installed SS
9. Enjoy.
Here Bean's Rom:
http://forum.xda-developers.com/show....php?t=2523159
Here's SafeStrap:
http://forum.xda-developers.com/show....php?t=2517610
Quick Google search will get you Kingo's app and the latest SuperSU...
SUPPORT THE DEVS! BEANSTOWN106 for ROM, and HASHCODE for Safe Strap. Also THANK DutchDogg54 for these instructions!
Click to expand...
Click to collapse
Why didn't you include hyperdrive? And the other 2 roms? And nice thread.
Sent from my SM-N900V using Tapatalk
Brandonrz said:
Why didn't you include hyperdrive? And the other 2 roms? And nice thread.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
I only included what I personally tried so I could say I KNOW IT WORKS. But you are right, I should add the other threads to the ROMs for others to try. Thanks for the correction!
az_biker said:
I only included what I personally tried so I could say I KNOW IT WORKS. But you are right, I should add the other threads to the ROMs for others to try. Thanks for the correction!
Click to expand...
Click to collapse
Lol, np. I'm pretty sure you would know if any of those roms don't work. The genral section, yes I ment general, would be blown up with nubs saying. "Halp plz, phone no turn on." Haha
Sent from my SM-N900V using Tapatalk
ive been trying to root with kingo for about 3 days and still no root help me please!!
if the SS have password before launch would be better~~
eastside770 said:
ive been trying to root with kingo for about 3 days and still no root help me please!!
Click to expand...
Click to collapse
-I went to kingo site (Google it, no kingo links allowed on XDA) and downloaded their program (to put on your desktop)
- install kingo to your pc
-follow instructions in kingo app
-make sure you have (unknown sources) checked in SECURITY
-make sure you have (usb debugging) checked in DEVELOPER OPTIONS
-I set my display to not time out for 10 minutes after I failed to root the first three times with kingo thinking maybe the screen timing out was causing an issue, the fourth time was flawless (not sure if the display timeout was it or not)..
try these steps, let me know how it works out!
I really think it's my PC. It won't install all of the drivers. I plug it up and kingo tries to connect does sometimes and sometimes it don't.
Sent from my Nexus 7 using xda app-developers app
eastside770 said:
I really think it's my PC. It won't install all of the drivers. I plug it up and kingo tries to connect does sometimes and sometimes it don't.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Try going to Control Panel > Pograms find all Samsumg drivers and uninstall them, and try Kingo again.
If that still doesn't work, read through THIS forum:
http://forum.xda-developers.com/showthread.php?t=2484231
Good luck!
i can never get samsung_android driver to install.. and i dunno why
eastside770 said:
i can never get samsung_android driver to install.. and i dunno why
Click to expand...
Click to collapse
Just guessing here: 32bit vs 64bit issue? Maybe corrupt Samsung driver? Sorry I'm not much help...
Sent via Notorius 3
Where do you find developer options on the vzw note 3?
Sent from my SM-N900V using XDA Premium 4 mobile app
Mark.Y said:
Where do you find developer options on the vzw note 3?
Sent from my SM-N900V using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Settings>about phone>click BUILD NUMBER 7-8 times, then back to settings
I don't know why but this doesn't seem EASY to me. I am so used to ADB and ODIN to root. The other methods seem easier to me because I download the files and run what I need (GS4, Note2, Nexus, and Nexus 7). Now files need to be Googled and downloaded separately.
I never have problems with driver I usually manually make my pc find and install them. I need to root so I can stop using my S4 and sell it.
Sent from my SM-N900V using Tapatalk
Xirix12 said:
I don't know why but this doesn't seem EASY to me. I am so used to ADB and ODIN to root. The other methods seem easier to me because I download the files and run what I need (GS4, Note2, Nexus, and Nexus 7). Now files need to be Googled and downloaded separately.
I never have problems with driver I usually manually make my pc find and install them. I need to root so I can stop using my S4 and sell it.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
You from Yuma? I'm in the Foothills! This was super easy for me... Hardest part was I had to run Kingo three times before my Note 3 would successfully ROOT. The whole kingo app was basically clicking OK over and over and over..
The step by step in the OP is exactly what I followed, and I didn't know ANYTHING about flashing a rom this way OR safe strap... I'm used to downloading the rom, kernel, and add-ons and flashing them in TWRP...no rom slots, no creating or activating roms. Even as clueless as I was, these step by steps walked me right through the entire process without a hitch (except the Kingo part)...
What part are you getting stuck on? The only file you NEED to Google is the Kingo app because XDA won't allow the link... compared to pushing via adb, line by line commands and the old school way, this is a breeze!
az_biker said:
You from Yuma? I'm in the Foothills! This was super easy for me... Hardest part was I had to run Kingo three times before my Note 3 would successfully ROOT. The whole kingo app was basically clicking OK over and over and over..
The step by step in the OP is exactly what I followed, and I didn't know ANYTHING about flashing a rom this way OR safe strap... I'm used to downloading the rom, kernel, and add-ons and flashing them in TWRP...no rom slots, no creating or activating roms. Even as clueless as I was, these step by steps walked me right through the entire process without a hitch (except the Kingo part)...
What part are you getting stuck on? The only file you NEED to Google is the Kingo app because XDA won't allow the link... compared to pushing via adb, line by line commands and the old school way, this is a breeze!
Click to expand...
Click to collapse
Yea, Pacific and 24th. I didn't even notice that just. I just got home from work and said "I need to get root tonight!". I am not really getting stuck since I haven't even started. I am going to try this tonight. Thanks for the help and support. Also, good to know you're just down the street.
Xirix12 said:
Yea, Pacific and 24th. I didn't even notice that just. I just got home from work and said "I need to get root tonight!". I am not really getting stuck since I haven't even started. I am going to try this tonight. Thanks for the help and support. Also, good to know you're just down the street.
Click to expand...
Click to collapse
Cool. Whole process took me less than 30 minutes.
Yea it was actually VERY easy. I was just not sure or couldn't believe how easy it was. I am rooted and safe strapped. First time using safe strap and it seems very safe. Thanks
Edit: forgot to mention that Kingo said rooting failed. So I tried to unroot and it didn't work. I unplugged installed root checker. I was asked to grant root access and root checker confirmed that I had root access. Worked on the very first try even though it told me it didn't.
Also it installs SuperSu for you now so no need to look for it to install it.
Xirix12 said:
Yea it was actually VERY easy. I was just not sure or couldn't believe how easy it was. I am rooted and safe strapped. First time using safe strap and it seems very safe. Thanks
Edit: forgot to mention that Kingo said rooting failed. So I tried to unroot and it didn't work. I unplugged installed root checker. I was asked to grant root access and root checker confirmed that I had root access. Worked on the very first try even though it told me it didn't.
Also it installs SuperSu for you now so no need to look for it to install it.
Click to expand...
Click to collapse
It has always installed SuperSU. The purpose of flashing Chainfire's zip file is to overwrite the one that Kingo installs. Just in case there was something nefarious (sp?) going on with the one it installed.
Sent from my SM-N900V using Tapatalk
Is it safe to assume this doesn't interfere with Knox? If this was my personal phone I wouldn't care but it's my work phone so I need to make sure warranty stays intact.
Sent from my SM-N900V using XDA Premium 4 mobile app
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
MIUI6 for Nexus 5
Download 5.3.13
Download fixbrowservideo.zip
What is working:
- Most functions (WI-Fi, GPS, mobile data, signal strength etc.)
- Blur
- MIUI Camera
- Web browser
- Webview
Known issues:
- Crash when attempting to manually set ISO in Camera
- Crash when selecting Dirac-option in Settings
- Crash when attempting to watch videos in Browser and other webview apps (Flash attached zip fixbrowservideo.zip)
How to fix GPS:
Push framework-res with fixed AGPS to /system/framework using adb or similar.
Remove AMAP network location (i don't remember exact name, but starts with AMAP) apk.
Enable GPS in Location settings
Download GPS Status app and choose "Download AGPS data"
This ROM comes with multiple languages and is one of the first ever non-Xiaomi MIUI6 ports to be released.
It fully supports MIUI Camera and blur.
Install instructions:
- Wipe data and cache
- Install MIUI zip
- Install fixbrowservideo.zip (To fix video in browser)
- Reboot to system
Based on:
Xiaomi.eu Mi3/Mi4 (cancro) ROM
Custom, source-built Omni 4.4 Kitkat
ElementalX-N5-1.13
XDA:DevDB Information
MIUI6 Nexus 5 port, ROM for the Google Nexus 5
Contributors
datagutt, Xiaomi, BurgerZ, Xiaomi.eu, pijulius
Source Code: http://github.com/flar2/ElementalX-N5/tree/ElementalX-1.00
ROM OS Version: 4.4.x KitKat
Based On: MIUI and Omni
Version Information
Status: Testing
Current Beta Version: 5.3.13
Created 2014-09-16
Last Updated 2015-04-01
Reserved
You are the man! Thank you [emoji2]
Sweet thanks
Pizzarrone said:
You are the man! Thank you [emoji2]
Click to expand...
Click to collapse
I tried to use my port as a daily driver, but the webview bug is too big of an issue to me personally.
Over the years I've watched this ROM reach new levels of gorgeousness. Will definitely check it out.
After flashing the ROM zip and Gapps, when I press reboot it goes to fastboot screen, then when I press START it just stay on a black screen. Did I did something wrong?
guigadourado said:
After flashing the ROM zip and Gapps, when I press reboot it goes to fastboot screen, then when I press START it just stay on a black screen. Did I did something wrong?
Click to expand...
Click to collapse
Same prob. here
guigadourado said:
After flashing the ROM zip and Gapps, when I press reboot it goes to fastboot screen, then when I press START it just stay on a black screen. Did I did something wrong?
Click to expand...
Click to collapse
Same here
The same without gaaps
mvha said:
Same here
The same without gaaps
Click to expand...
Click to collapse
I recommend you do full data reset.
Whip system,data,cach,
Sent from my Nexus 5 using xda premium
guigadourado said:
After flashing the ROM zip and Gapps, when I press reboot it goes to fastboot screen, then when I press START it just stay on a black screen. Did I did something wrong?
Click to expand...
Click to collapse
baggord said:
Same prob. here
Click to expand...
Click to collapse
You can try to install the rom and reboot and see if it works, then go back into recovery and flash the gapps ... might work....or has deep problems.
I did a clean flash without the gapps and then did another with the gapps, same thing happened
guigadourado said:
I did a clean flash without the gapps and then did another with the gapps, same thing happened
Click to expand...
Click to collapse
Ok, then there are problems to be solved, too bad ..
Flashed in multirom no problems
Only google search had stoppen after reboot
But thanx 4 ya works
in downloadgapp banks minimal?
Nice bro !
Can you post some screens ?
Cheers !
i did just install it from multirom and can't boot it up !
not main
TheDarkLegend said:
i did just install it from multirom and can't boot it up !
Click to expand...
Click to collapse
it can not be your internal rom it has to be add as one of extra roms
my question is how can you add gapps????????????????????
i have multirom!flash rom,rebot!recovery flash gapp nano rebot!all ok:good:
Looking forward to trying this, haven't flashed a ROM in a awhile, need to get back into flashing ROMs often again
Sent from my Nexus 5 using XDA Free mobile app
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD Cards, thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about this guide before following it!
* YOU are choosing to make these modifications.
Click to expand...
Click to collapse
Check out new version located Here
This is TWRP-recovery using cm-11.0 source
Changelog: Beta v1
1) Initial release of TWRP-recovery
2) Has all features and fixes
Installation
1.)Turn on usb debugging in developer option.
2.)Power off your device, press and hold Volume Down + Home + Power buttons at the same time until you see a Warning with a Yellow Triangle.
3.)Now press Volume Up button. Your phone now is in ODIN MODE (Download Mode).
4.)Open Odin on PC.
5.)UNTICK everything
6.)Connect Phone to PC using USB Cable.(You will see added message on Odin)
7.)On Odin click on PDA(till version 3.07) OR click on AP(after version 3.09)
8.)Select the recovery.tar.md5
9.)Press on start.
10.)Remove battery quickly after Odin says pass before it boots up.
11.)Insert battery again. Press Power + Volume Up + Home button, and hold till you see the Samsung logo.
12.)If you see a Red Exclamation on the Top Left Corner of the screen, then you have installed TWRP-recovery properly, and it will open up.
It is in .zip format so first extract it ... then you will get tar.md5
FAQ
Ques.I am not able to boot into system or my phone is stuck at Samsung (Bootsplash)
Ans.
(1)Go back to recovery and wipe data, wipe cache, wipe dalvik
(2)Flash stock rom and
(3)Then again flash my recovery
Hence:- problem solved
Download
1)
a. Recovery- https://www.androidfilehost.com/?fid=24052804347849173 v1
b. Recovery- https://www.androidfilehost.com/?fid=24369303960688726 v2
2. Odin - https://drive.google.com/file/d/0BwfVH-QIZQCjWXRaNnVSN3NFZTQ/view?usp=sharing
NOTE:- TWRP lovers dont flash cm11 rom (when it is ready) using old twrp it will give error while installing
bcz twrp need file system selinux which is not present in old twrp...
Source :- https://github.com/orgs/Fire-Galaxy
-----------------------------------------------------------------------
Bug report:- The TWRP is not able to make backups (rom backups) need some time to fix
reporter :- @deniljoseph
-----------------------------------------------------------------------
Contributor & highly worked on CM-11 branch
@FireLord
If i forgot to mention any one in credits please pm @deniljoseph dont spoil the thread
Good job man
Well done bro flashed successfully
Sent from my GT-S7262 using XDA Free mobile app
Thanks
Thanks bros
Working fine.. Thank man
Nice Work man...Keep it up...???
keaheng said:
Working fine.. Thank man
Click to expand...
Click to collapse
backup/restore may not work .. due to old source from twrp but ......... :fingers-crossed:
jithinjmj777 said:
Nice Work man...Keep it up...������
Click to expand...
Click to collapse
Pleasure