CyanogenMod 13 is a free, community built, aftermarket firmware distribution of Android 6.0.x (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, dead cats,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will break it! :P
* Act accordingly
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All bug reports that don't meet this conditions will be ignored:
You have the kernel provided in the zip file
You made a clean flash and didn't restore anything
You made a detailed review of the problem
You provide a logcat in a .txt file (Search on internet)
You provide dmesg or last_kmsg if it is a kernel panic (Search on internet)
! Use the Report BUG section up.
I AM NOW IGNORING EACH AND EVERY SUBMIT WITHOUT THOSE. BUGS REPORTED IN NOT WORKING ARE ALSO IGNORED
What's working :
What's not working :
Nothing tested
Instructions :
Reboot to TWRP 3
Make a full wipe (/system, /data, /cache, /dalvik-cache, /dalvik, all caches) FULL. Do not report not working if you don't do this.
Flash the Cm13 zip and reboot.
!!! NO GAPPS ATM PLEASE. DO NOT REPORT BUGS WITH THEM.
If you like my work consider the coffee here :good: :
If I get enough coffee I might buy a second hand device to finish this faster.
Downloads :
Go up and on the block bar you will see a Download tab. Press that.
Thank you to all donators :
Credits:
@Varcain -> initial L9 II work
All people testing since I don't have this device in my hands.
XDA:DevDB Information
[ROM][Unofficial]CM13 for D605 (L9 II), ROM for the LG Optimus L9 II
Contributors
neutrondev
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP 3
Based On: CyanogenMod
Version Information
Status: Testing
Created 2016-04-03
Last Updated 2016-04-03
Reserved
Rom does't boot, after a few minutes it restarts and goes in recovery.
Mattia990 said:
Rom does't boot, after a few minutes it restarts and goes in recovery.
Click to expand...
Click to collapse
If you say that it is not gonna help in any way. Logcat starts? Did you pull last_kmsg? Instructions about reporting are very clear. If you say that there is no useful information at all. Last_kmsg and if logcat starts logcat please.
download ?
neutrondev said:
If you say that it is not gonna help in any way. Logcat starts? Did you pull last_kmsg? Instructions about reporting are very clear. If you say that there is no useful information at all. Last_kmsg and if logcat starts logcat please.
Click to expand...
Click to collapse
Logcat don't work, but last_kmsg yes... here you are
View attachment last_kmsg.txt
Oohhh man , that's cool ! Haven't tested yet but keep up the good work !
Well, I can install the image(which is already reported to not work), but please tell me what exactly you need from it(e.g logcat or something like that), because I have no experience with android development and I don't know how to debug it
Use logcat when trying to boot not in recovery.
Sent from my LG-H815 using XDA-Developers mobile app
neutrondev said:
Use logcat when trying to boot not in recovery.
Sent from my LG-H815 using XDA-Developers mobile app
Click to expand...
Click to collapse
I tried but computer doesn't recognize the phone with adb
Mattia990 said:
I tried but computer doesn't recognize the phone with adb
Click to expand...
Click to collapse
You now have a boot.img in the Downloads section. Flash the zip then this boot.img and tell me if you have logcat.
dear neutrondev i don't know if you realized but the bootloader on the d605 is locked and impossible to unlock so the twrp is "useless" in comparison to cwm that is "loki-fied"
AWESOME1092387456 said:
dear neutrondev i don't know if you realized but the bootload on the d605 is locked and impossible to unlock so the twrp is "useless" in comparison to cwm that is "loki-fied"
Click to expand...
Click to collapse
Oh. So you have a locked bootloader?
neutrondev said:
Oh. So you have a locked bootloader?
Click to expand...
Click to collapse
Infact i replaced boot.img in the zip, but nothing. ADB(logcat) doesn't work.
Mattia990 said:
Infact i replaced boot.img in the zip, but nothing. ADB(logcat) doesn't work.
Click to expand...
Click to collapse
You replaced it with what?
Sent from my LG-H815 using XDA-Developers mobile app
AWESOME1092387456 said:
dear neutrondev i don't know if you realized but the bootloader on the d605 is locked and impossible to unlock so the twrp is "useless" in comparison to cwm that is "loki-fied"
Click to expand...
Click to collapse
You need to be on V20A aboot right?
To get the custom recovery you need to be on v10a or jelly Bean even if you have root on kitkat it is impossible to get custom recovery(this phone is f-ed up)
Sent from my LG-D605 using Tapatalk
AWESOME1092387456 said:
To get the custom recovery you need to be on v10a or jelly Bean even if you have root on kitkat it is impossible to get custom recovery(this phone is f-ed up)
Sent from my LG-D605 using Tapatalk
Click to expand...
Click to collapse
So you need to be on V10a to have a custom recovery?
You need to downgrade then root with impactor and then you can get custom recoveries
Sent from my LG-D605 using Tapatalk
AWESOME1092387456 said:
You need to downgrade then root with impactor and then you can get custom recoveries
Sent from my LG-D605 using Tapatalk
Click to expand...
Click to collapse
So you need V10 aboot for this loki thing to work. Yes or no?
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Hey guys, so after a few days of work, ive gotten a build of cm-10.2 booted. Please keep in mind that this is a WIP and there may be some things broken.
Whats changed from 4.2?
http://www.funkyandroid.com/aosp-JDQ39-JSS15J.html
Click to expand...
Click to collapse
Whats working?
Touchscreen
Wifi
Bluetooth
GPS
Storage
Recovery
FM Radio
Click to expand...
Click to collapse
Whats not working?
Back facing camera. Panorama mode does work, however.
Click to expand...
Click to collapse
Source
Device: https://github.com/iurnait/android_device_samsung_venturi/
Kernel: https://github.com/iurnait/android_kernel_samsung_venturi/
Click to expand...
Click to collapse
Thanks to:
@android1234567
@JackpotClavin
@Mevordel
@zaclimon
Installation instructions:
Please note that if you are on a GB rom and you get a status 7 assert error when trying to flash this rom, first flash a cm9 rom, power off the device, and boot into recovery again.
Click to expand...
Click to collapse
Download rom and gapps (and us kernel zip if necessary)
reboot into recovery
MAKE A BACKUP
wipe data, cache, dalvik cache
under mounts and storage, wipe /system and /system_app
flash rom
flash gapps
(flash us kernel zip)
reboot and enjoy
If you are updating from a previous build of cm-10.2, please wipe cache and dalvik
Downloads
Current recommended build (M1 Snapshot)
ROM: cm-10.2-20131105-UNOFFICIAL-venturi.zip - 155.03 MB
US Kernel: pac_venturiusa_kernel-nov4.zip - 5.26 MB
Gapps: http://d-h.st/users/ZordanKV/?fld_id=22749#files
Click to expand...
Click to collapse
Previous version
Rom:cm-10.2-20130911-UNOFFICIAL-venturi.zip - 167.52 MB
Gapps: http://forum.xda-developers.com/showthread.php?t=2012857
US Kernel: cm-10.2-USA-Kernel-REV3.zip - 5.09 MB
Click to expand...
Click to collapse
Check out my github in the device folder, I've got the storage working with some fstab magic
Sent from my DROID RAZR M using xda app-developers app
This is is destined for epic-icity. :laugh:
I always chuckle when I see this- * you point the finger at me for messing up your device, I will laugh at you.
JackpotClavin said:
Check out my github in the device folder, I've got the storage working with some fstab magic
Sent from my DROID RAZR M using xda app-developers app
Click to expand...
Click to collapse
I wish I could give you over 9000 thanks.
You is awesome
That didn't take long.
Build uploaded. This includes the INTL kernel; a US kernel is building right now. AFAIK, this rom currently wont work with other custom kernels. check second post for flashing instructions and keep in mind that this is a beta build, so things may go wrong.
Everything seems okay, I just cant get root access
An1mus said:
Everything seems okay, I just cant get root access
Click to expand...
Click to collapse
Issue is addressed in the OP. Use SuperSU.
Sent from my YP-G70 using Tapatalk 4 Beta
iurnait said:
Issue is addressed in the OP. Use SuperSU.
Sent from my YP-G70 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Hmm it's telling me that the binary failed to ,so still no SU
I'll just wait I guess
An1mus said:
Hmm it's telling me that the binary failed to ,so still no SU
I'll just wait I guess
Click to expand...
Click to collapse
flash this: http://download.chainfire.eu/supersu
Ive uploaded a new build that should fix superuser and has a few more changes from Mevordel that I had forgotten to merge. Ive also changed the link to the gapps package to a more comprehensive zip, so it is best to do a full wipe if coming from the build earlier today to avoid duplicate apps showing up.
ROM:
http://d-h.st/38D
GAPPS:
gapps-jb-20130729.zip - 80.91 MB
US Kernel (new version):
check op
Can't wait to flash this ROM!
Sent from my YP-G70 using xda app-developers app
iurnait said:
Ive uploaded a new build that should fix superuser and has a few more changes from Mevordel that I had forgotten to merge. Ive also changed the link to the gapps package to a more comprehensive zip, so it is best to do a full wipe if coming from the build earlier today to avoid duplicate apps showing up.
ROM:
http://d-h.st/38D
GAPPS:
gapps-jb-20130729.zip - 80.91 MB
US Kernel (new version):
uploading
Click to expand...
Click to collapse
And there go our chances of getting rid of the extra partition hack by using a smaller gapps package
Sent from my Galaxy Nexus
The ROM boots up fine. Scrolling and going into the app drawer has a huge drop in frame. Doesn't matter if it's trebuchet or Nova, still very laggy when scrolling. Other than, the ROM is great
Great job getting 4.3 to work Keep up the good work!
I noticed that scrolling in general on the web browser, Facebook,etc has a drop in frames.
sultan kernel
can i flash the sultan kernel?
angelos208 said:
can i flash the sultan kernel?
Click to expand...
Click to collapse
No. Wait for r6 of his kernel.
iurnait said:
No. Wait for r6 of his kernel.
Click to expand...
Click to collapse
ok man thanks! tou rock! im your bigest fan!
Hmm, any kernel repo with commits I should add to the kernel to boot it on 4.3?
4.3 probably changes nothing here on yp-g70 but still I would like to test it
Wysłane z mojego Nexus S za pomocą Tapatalk 4
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
This Support of the CyanogenMod is Unofficial and the sources are up at Androidarmv7.
STRICTLY FOR DEVELOPERS ONLY, NOOBS PLEASE DONT INSTALL IT NOW.
Don't know when Samsung will officially announce Kitkat update for our Galaxy Grand 2, so thought to create own CM-11 (Kitkat 4.4.4).
The ROM zip file is ready to test but at present it is giving Error 7 while flashing in Recoveries (TWRP, CWM and Philz). I have tried many times to get success in all recoveries but still no luck, so thought to share with other developers to check and find the error. At present it is not on github so please dont ask for link, will upload it soon. I have just compiled it from CyanogenMod source in my pc only.
I've got this idea to share with other developers from past experience with LG-P500. It is almost 4 years old phone and still running with KITKAT (see my signature). Developer AndroidMeda from Jenkins initially developed that rom for LG-P500 users without any success for almost 2 weeks from its release date and all lg-p500 developers/users tried their luck to get success. Luckly I was the first one to taste yummy KitKat on LG-P500 and after that it all went smooth.
So I am hopeful and looking forward to developers to get success soon for Grand 2 too.
Sharing ROM Link and my unsuccessful recovery logcat for reference.
Link : REMOVED BY VECTUS
reserved for future
one more reserved
is this official CM?
Sent from my SM-G7102 using XDA Premium 4 mobile app
Thanx for creating cm. And will you be making cm official ? I aint the best but.....
As I can see, theres a lot of mount and selinux failing problems.
And are you using first or second build of twrp ? As the second one has some fix for seLinux
mobihack said:
Thanx for creating cm. And will you be making cm official ? I aint the best but.....
As I can see, theres a lot of mount and selinux failing problems.
And are you using first or second build of twrp ? As the second one has some fix for seLinux
Click to expand...
Click to collapse
Ohhh thanks... I was using first built of TWRP, can you guys check on twrp built 2?
mukulsoni said:
Ohhh thanks... I was using first built of TWRP, can you guys check on twrp built 2?
Click to expand...
Click to collapse
Try use Philz ... I have problem with backup with twrp... So i use philz.... Just use philz... And @mukulsoni see my pm . maybe that can make the rom success in recovery
Glad i could help. And if I had the bandwidth I would download it for sure but I am on a limited plan.
Pl publish ur sources i.e device tree,kernel tree and vendor files .....
EDIT: did u add selinux support to the kernel source? thats the error
rutvikrvr said:
Pl publish ur sources i.e device tree,kernel tree and vendor files .....
EDIT: did u add selinux support to the kernel source? thats the error
Click to expand...
Click to collapse
Right..I think I told him to modify the kernel sources. @mukulsoni, enable the selinux settings in the kernel source. And also please mention the sources. If you don't you will violate GPL.
Sent from my GT-I9082 using Tapatalk
INFO
First of all thanks to the deve, Has anyone tested this, is it working please let me know.
vandroid699 said:
First of all thanks to the deve, Has anyone tested this, is it working please let me know.
Click to expand...
Click to collapse
you can try yourself.. and because you a dev for our grand 2, maybe you can fix the problem
mukulsoni said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Sharing ROM Link and my unsuccessful recovery logcat for reference.
Click to expand...
Click to collapse
Bro I got the problem......... i will be see it if it fix it then ...... i will let u know...............
aapav01 said:
Bro I got the problem......... i will be see it if it fix it then ...... i will let u know...............
Click to expand...
Click to collapse
Great, if you've got the error. Now I am able to flash it successfully in all 3 recoveries and when I click to reboot system its return back to download mode. So we have to work on kernel part now. lets hope for your success. :fingers-crossed:
Bro See the SS after fix the Flashing issuse ....................... but it boot to Odin MOde saying.. Couldnt do normal boot
mukulsoni said:
Great, if you've got the error. Now I am able to flash it successfully in all 3 recoveries and when I click to reboot system its return back to download mode. So we have to work on kernel part now. lets hope for your success. :fingers-crossed:
Click to expand...
Click to collapse
Yes It do boot to Downloading mode
aapav01 said:
Bro See the SS after fix the Flashing issuse ....................... but it boot to Odin MOde saying.. Couldnt do normal boot
Click to expand...
Click to collapse
As I said above, its get into Download mode, need to work on kernel part. Can you or any developer extract the kernel from this rom and work on it, at present I am busy in some other work.
mukulsoni said:
As I said above, its get into Download mode, need to work on kernel part. Can you or any developer extract the kernel from this rom and work on it, at present I am busy in some other work.
Click to expand...
Click to collapse
Im not to gud in Kernel bro
------------------------------------------------------------------------------
i Hve change the the following thing:
> update-binary
> path of system from " /dev/block/mmcblk0p22 " to " /dev/block/platform/msm_sdcc.1/by-name/system "
> path of boot.img to " /dev/block/mmcblk0p14 " to " /dev/block/platform/msm_sdcc.1/by-name/boot "
Just this MUCH... :angel:
modified file in Below
aapav01 said:
Im not to gud in Kernel bro
------------------------------------------------------------------------------
i Hve change the the following thing:
> update-binary
> path of system from " /dev/block/mmcblk0p22 " to " /dev/block/platform/msm_sdcc.1/by-name/system "
> path of boot.img to " /dev/block/mmcblk0p14 " to " /dev/block/platform/msm_sdcc.1/by-name/boot "
Just this MUCH... :angel:
modified file in Below
Click to expand...
Click to collapse
Can we try using CM with Stock Kernel??
white7561 said:
Can we try using CM with Stock Kernel??
Click to expand...
Click to collapse
nope
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, dead cats,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will break it! :P
* Act accordingly
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
The source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Important information:
This thread is for CyanogenMod 12 opensource builds for the LG G3 (D855). The following will not be supported in this thread:
Custom Kernels
Mods
Modified system files
Xposed
Instructions:
-- coming from other roms:
Make a backup on TWRP (always highly advised)
Wipe data/factory reset
Flash CyanogenMod
Reboot and enjoy
-- updating CyanogenMod rom:
Download update
Flash in recovery (no need to wipe)
Reboot and enjoy
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
CyanogenMod:
Latest Nightly: Download
Changlog: CM12 Nightlies Changelog - D855
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
CyanogenMod 12, ROM for the LG G3
Contributors
AngelBob, invisiblek, finnq, sooti, manups4e
Source Code: https://github.com/CyanogenMod/
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-01-07
Last Updated 2015-11-14
Where can I find the current bugs?
Tapatalked thru my LG G3
Thanks for making the thread. How's it running? How's it feel compared to the unofficial builds?
Gapps missing from your post
Sent from my LG-D855 using XDA Free mobile app
GTMoraes said:
Where can I find the current bugs?
Click to expand...
Click to collapse
http://forum.xda-developers.com/devdb/project/?id=7560#bugReporter
sabret00the said:
Thanks for making the thread. How's it running? How's it feel compared to the unofficial builds?
Click to expand...
Click to collapse
Just the same for me
Anarchy66 said:
Gapps missing from your post
Click to expand...
Click to collapse
Yup, There are no CM12 Gapps on the wiki: http://wiki.cyanogenmod.org/w/Google_Apps
gapps
Can I use pa gapps with this Rom?
telar said:
Can I use pa gapps with this Rom?
Click to expand...
Click to collapse
yes you can! use the LP PA gapps! flash rom flash gapps reboot. same procedure since cm6.
masterismos said:
yes you can! use the LP PA gapps! flash rom flash gapps reboot. same procedure since cm6.
Click to expand...
Click to collapse
Awesome, ty, for quick response! I'm sorry of new to this so didn't know for sure.
Aw.. It doesn't work with MultiROM. Which one needs to be fixed? MultiROM or CM?
Tapatalked thru my LG G3
I'm on the first nightly right now and notice that the loudness of the speaker used to be boosted up.
I know AndroidUser do have the loudness enhancement patch of d855 and it works.
Please emerge it into the official build.
Finally, thank you for supporting the d855.:thumbup::thumbup:
Sent from my LG-D855 using XDA Free mobile app
Setup Wizard has stopped
Damm. :crying:
1st boot after install [ROM][D855] CyanogenMod 12 OFFICIAL Nightly [Android 5.0 Lollipop] loop text Unfortunately, Setup Wizard has stopped. I reboot and same hapend.
johnpat said:
I'm on the first nightly right now and notice that the loudness of the speaker used to be boosted up.
I know AndroidUser do have the loudness enhancement patch of d855 and it works.
Please emerge it into the official build.
Finally, thank you for supporting the d855.:thumbup::thumbup:
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
+1 :good:
GTMoraes said:
Aw.. It doesn't work with MultiROM. Which one needs to be fixed? MultiROM or CM?
Tapatalked thru my LG G3
Click to expand...
Click to collapse
To make it work as a secondary rom, the updater-script needs small changes. For instructions see my post here. It's for a different rom, but the code snippet in that post shows you which lines to comment out in the updater-script (located in /META-INF/com/google/android). In D855 rom those are lines 10-15 and 22.
Wow finally official Thank you very much for excellent work! I was waiting for CM since i got device.
Is there still problem with video playing/recording and calls? I was looking for bugs list but found only Setup crash.
Great that it is Official now. Looking forward for a stable CM12.
Sent from my LG-D855 using Tapatalk
Hi @AngelBob you forgot me in the thanks section ^^
Whoa great!! Can't wait to flash! Lets have a nice flashing weekend
manups4e said:
Hi @AngelBob you forgot me in the thanks section ^^
Click to expand...
Click to collapse
Had the same reaction ^^
tobitege said:
To make it work as a secondary rom, the updater-script needs small changes. For instructions see my post here. It's for a different rom, but the code snippet in that post shows you which lines to comment out in the updater-script (located in /META-INF/com/google/android). In D855 rom those are lines 10-15 and 22.
Click to expand...
Click to collapse
You're the man! I'll give this a shot. Thank you
--------------
Didn't work.. black screen with
"An Error Ocurred.
Shutting down MultiROM to avoid data corruption"
is this a ROM or MultiROM problem?
Is it the official?
Sent from my LG-D855 using XDA Premium 4 mobile app
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Click to expand...
Click to collapse
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
IMPORTANT INFORMATION
Click to expand...
Click to collapse
We'll not support users and answer questions from users which:
- are running a custom kernel
- have flashed mods
- modified system files
- didn't follow our instructions word by word
- are unfriendly
INSTRUCTIONS
Click to expand...
Click to collapse
First time installing CyanogenMod 12.1 to your Lg G3 D855, or coming from another ROM:
- Read known issues ans FAQs
- Flash one of the recovery images (CWM, TWRP)
- Copy GApps and CM12.1 ZIPs to your SDCard
- Boot into Recovery
- Flash CM12.1 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device might be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 12.1:
- Copy CM12.1 ZIP to your SDCard
- Boot into Recovery
- Flash CM12.1 zip from SDCard
- Reboot
Working:
Click to expand...
Click to collapse
Wifi
Camera
RIL
3G & LTE
Sensors
GPS (maybe)
Bluetooth??
Not Working:
Click to expand...
Click to collapse
Sometimes it does not want to wake up from sleep (like me)
DOWNLOADS
Click to expand...
Click to collapse
Beta 1
5.1 GAPPS: Here
Kernel Sources:
https://github.com/CyanogenMod/android_kernel_lge_g3
Beta 1 22/04/2015:
initial release
RIL wokring
Mate are you lifewalker? Sorry if i am wrong... Thanks for this one...
Thanks!
takis said:
Mate are you lifewalker? Sorry if i am wrong... Thanks for this one...
Click to expand...
Click to collapse
No I'm not ?
Sent from my LG-D855 using XDA Free mobile app
This is what I was waiting a long time ... thank you very much for the work!:victory::victory::victory:
with version 5.1.1 of RAM really the problem is solved?
alejobog said:
This is what I was waiting a long time ... thank you very much for the work!:victory::victory::victory:
with version 5.1.1 of RAM really the problem is solved?
Click to expand...
Click to collapse
Not by the looks of it. There is still a memory leak somewhere
Sent from my LG-D855 using XDA Free mobile app
after a couple of hours worked me everything without problem.
the only thing is that I slowly throughout the system, I think it is normal for being the first version, I hope to go slowly resolving this as and when updates or exit the official version
PD: Bluetooth work ok! GearManager
Nice work!! Seems to be stable. For now I noticed only some double tap to wake issues as you mention
MultiROM support?
Anyone tried this via MultiROM as a 2nd ROM?
Sorry but is ambient display mod in the new builds yet? Can't seem to find... Sorry if missed info... Tyvm
takis said:
Mate are you lifewalker? Sorry if i am wrong... Thanks for this one...
Click to expand...
Click to collapse
Life walker is not on XDA as far as I know but can be found on google+ https://plus.google.com/+LifeWalker/posts
Looks like Lifewalker posted a newer 12.1 build aswell.
Will definitely give OP's build a go as sounds to be pretty stable
Great job.
This ROM work fine. The problem for me is I like me with more settings. Thank you by your good job.
Hi. Is there any chance to fix manual network search?
Looks like some Samsung devices had fix http://review.cyanogenmod.org/#/c/85732/
Could this be also solution for LG?
winxuser said:
Sometimes it does not want to wake up from sleep (like me)
Click to expand...
Click to collapse
Does it happens a lot ?
And, I assume that you need to pull battery if that happens, right ?
Thanks for you work
RL77LUC said:
Does it happens a lot ?
And, I assume that you need to pull battery if that happens, right ?
Thanks for you work
Click to expand...
Click to collapse
I don't have this bug on my d855. Use this build from the release.
Step-han said:
I don't have this bug on my d855. Use this build from the release.
Click to expand...
Click to collapse
No you just have to press the power button again and it will show
Sent from my LG-D855 using XDA Free mobile app
bye bye lg left the phone on the car and the screen is now smashed, touch does not work properly and i dont have the money to fix a screen
and it's not all that a hot day today either - bummer!!
winxuser said:
bye bye lg left the phone on the car and the screen is now smashed, touch does not work properly and i dont have the money to fix a screen
Click to expand...
Click to collapse
How much does it cost there?
Android is an open source software stack created for a wide array of devices with different form factors. The primary purposes of Android are to create an open software platform available for carriers, OEMs, and developers to make their innovative ideas a reality and to introduce a successful, real-world product that improves the mobile experience for users.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Change Log:
29/05/2017:
Download the latest source.
Reset device tree developments.
Progress
Android system.
Audio: it was working great on 7.1.1, will investigate on the problem once get a stable marshmallow device tree to use for nougat then android o.
Display.
Bluetooth (Bluetooth Share fc is fixed).
Camera: sometime crash.
GPS.
Graphics: hwcomposer has been disabled.
NFC.
Sensors.
Storages.
Wifi
Source Code to make other roms
Device Tree: https://github.com/hak86/android_device_huawei_hi6210sft
Kernel GPLv2 compliant Kernel: https://github.com/hak86/android_kernel_huawei_hi6210sft
Click to expand...
Click to collapse
Downloads AOSP 7.0:
Gapps: click here.
ROM: click here.
Install ROOT:
Download the flashable from here.
Reboot to TWRP.
Click on Install.
Choose SR3-SuperSU-v2.79-SR3-20170114223742.
Confirm the action to start install.
Wait a few seconds until installation is done before reboot.
Your device should be rooted now.
Installation via TWRP:
Download the latest version.
Copy the rom into memory card.
Do a backup to your sdcard before flash the rom.
Click on Wipe.
Choose Cache, Dalvik, Data and System .
Slide the screen to wipe.
Click on Install.
Choose the rom you copy on sdcard.
Slide the screen to install.
Reboot, enjoy.
Contributors
@haky 86
Source Code: https://android.googlesource.com
ROM OS Version: 7.x.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 5.0 or up
Version Information
Status: beta
Created 2017-01-01
Last Updated 2017-29-05
haky 86 said:
-snip-
Click to expand...
Click to collapse
Great! I'll probably test it tomorrow, but by then you might have received more feedback
Reserved
Will take a look to boot.img tomorrow and reduce blobs to the minimal one needed for graphics.
XePeleato said:
Great! I'll probably test it tomorrow, but by then you might have received more feedback
Click to expand...
Click to collapse
thanks bro, i did the fault to send the device under holidays.. but should be ready soon. :angel:
Hi haky i Will test it now so stay tuned now i will make up some adb stuff for logcat
Spineshankumb said:
Hi haky i Will test it now so stay tuned now i will make up some adb stuff for logcat
Click to expand...
Click to collapse
I hope to get worked
Ciao
haky 86 said:
I hope to get worked
Ciao
Click to expand...
Click to collapse
Basketbuild connection is low maybe if i can help u after download i will upload on my Drive folder for a better connection...10 minutes for finish and i'm on 100mbps
Hello mate. A question does not need a base eg the b052 to install it? Or there is no problem from any other version .. Greetings Happy New Year !!
@haky 86 in my case, i installed it on my 4X (che2-l03, hi6210sft), and it shows the logo (not bootanimation), then restarts itself on recovery/twrp
btw, i was using an P8 Lite rom, so i guess that isn't a problem (ALE-L21C432B568)
I don't know if i can do something more to help
Ok after a full wipe and flash the device automatically reboot it self into recovery mode :S
Whats working and whats not working?
Sent from my ALE-L21 using Tapatalk
daaasek said:
Whats working and whats not working?
Sent from my ALE-L21 using Tapatalk
Click to expand...
Click to collapse
We don't know.
The OP (Haky 86) can't test it because his phone is bricked, he is waiting to get it back from repair. He needs feedback from users.
Spineshankumb said:
Ok after a full wipe and flash the device automatically reboot it self into recovery mode :S
Click to expand...
Click to collapse
That's mean it's a selinux issue, I will check cm-14.1 tree configuration and re-upload only boot image.
Spineshankumb said:
Ok after a full wipe and flash the device automatically reboot it self into recovery mode :S
Click to expand...
Click to collapse
Same for me, after wipe and flash it reboot into recovery.
haky 86 said:
That's mean it's a selinux issue, I will check cm-14.1 tree configuration and re-upload only boot image.
Click to expand...
Click to collapse
I recommendyou to use my ESAL kernel, aosp-7.0 branch, it includes the SeLinux patches.
what??? 02-02-2017
juanche007 said:
what??? 02-02-2017
Click to expand...
Click to collapse
It's my fault
panchovix said:
@haky 86 in my case, i installed it on my 4X (che2-l03, hi6210sft), and it shows the logo (not bootanimation), then restarts itself on recovery/twrp
btw, i was using an P8 Lite rom, so i guess that isn't a problem (ALE-L21C432B568)
I don't know if i can do something more to help
Click to expand...
Click to collapse
haky 86 said:
It's my fault
Click to expand...
Click to collapse
Hi @haky 86 is this the newest boot.img with selinux fixed?
https://basketbuild.com/devs/haky86/HuaweiP8Lite/Roms/AOSP/7.1.1/boot
thank u for ur time i'm ready with log cat cause we need to fix more than boot
Spineshankumb said:
Hi @haky 86 is this the newest boot.img with selinux fixed?
https://basketbuild.com/devs/haky86/HuaweiP8Lite/Roms/AOSP/7.1.1/boot
thank u for ur time i'm ready with log cat cause we need to fix more than boot
Click to expand...
Click to collapse
Even with new boot.img device reboots in recovery for me, did you get it working?
Lemon476 said:
Even with new boot.img device reboots in recovery for me, did you get it working?
Click to expand...
Click to collapse
i was making a backup of my current clean ROM so now i will try but i think the error is still the same. Have u flashed using option in TWRP flash img or have u putted it using adb?