Android is an open source software stack created for a wide array of devices with different form factors. The primary purposes of Android are to create an open software platform available for carriers, OEMs, and developers to make their innovative ideas a reality and to introduce a successful, real-world product that improves the mobile experience for users.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Change Log:
29/05/2017:
Download the latest source.
Reset device tree developments.
Progress
Android system.
Audio: it was working great on 7.1.1, will investigate on the problem once get a stable marshmallow device tree to use for nougat then android o.
Display.
Bluetooth (Bluetooth Share fc is fixed).
Camera: sometime crash.
GPS.
Graphics: hwcomposer has been disabled.
NFC.
Sensors.
Storages.
Wifi
Source Code to make other roms
Device Tree: https://github.com/hak86/android_device_huawei_hi6210sft
Kernel GPLv2 compliant Kernel: https://github.com/hak86/android_kernel_huawei_hi6210sft
Click to expand...
Click to collapse
Downloads AOSP 7.0:
Gapps: click here.
ROM: click here.
Install ROOT:
Download the flashable from here.
Reboot to TWRP.
Click on Install.
Choose SR3-SuperSU-v2.79-SR3-20170114223742.
Confirm the action to start install.
Wait a few seconds until installation is done before reboot.
Your device should be rooted now.
Installation via TWRP:
Download the latest version.
Copy the rom into memory card.
Do a backup to your sdcard before flash the rom.
Click on Wipe.
Choose Cache, Dalvik, Data and System .
Slide the screen to wipe.
Click on Install.
Choose the rom you copy on sdcard.
Slide the screen to install.
Reboot, enjoy.
Contributors
@haky 86
Source Code: https://android.googlesource.com
ROM OS Version: 7.x.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 5.0 or up
Version Information
Status: beta
Created 2017-01-01
Last Updated 2017-29-05
haky 86 said:
-snip-
Click to expand...
Click to collapse
Great! I'll probably test it tomorrow, but by then you might have received more feedback
Reserved
Will take a look to boot.img tomorrow and reduce blobs to the minimal one needed for graphics.
XePeleato said:
Great! I'll probably test it tomorrow, but by then you might have received more feedback
Click to expand...
Click to collapse
thanks bro, i did the fault to send the device under holidays.. but should be ready soon. :angel:
Hi haky i Will test it now so stay tuned now i will make up some adb stuff for logcat
Spineshankumb said:
Hi haky i Will test it now so stay tuned now i will make up some adb stuff for logcat
Click to expand...
Click to collapse
I hope to get worked
Ciao
haky 86 said:
I hope to get worked
Ciao
Click to expand...
Click to collapse
Basketbuild connection is low maybe if i can help u after download i will upload on my Drive folder for a better connection...10 minutes for finish and i'm on 100mbps
Hello mate. A question does not need a base eg the b052 to install it? Or there is no problem from any other version .. Greetings Happy New Year !!
@haky 86 in my case, i installed it on my 4X (che2-l03, hi6210sft), and it shows the logo (not bootanimation), then restarts itself on recovery/twrp
btw, i was using an P8 Lite rom, so i guess that isn't a problem (ALE-L21C432B568)
I don't know if i can do something more to help
Ok after a full wipe and flash the device automatically reboot it self into recovery mode :S
Whats working and whats not working?
Sent from my ALE-L21 using Tapatalk
daaasek said:
Whats working and whats not working?
Sent from my ALE-L21 using Tapatalk
Click to expand...
Click to collapse
We don't know.
The OP (Haky 86) can't test it because his phone is bricked, he is waiting to get it back from repair. He needs feedback from users.
Spineshankumb said:
Ok after a full wipe and flash the device automatically reboot it self into recovery mode :S
Click to expand...
Click to collapse
That's mean it's a selinux issue, I will check cm-14.1 tree configuration and re-upload only boot image.
Spineshankumb said:
Ok after a full wipe and flash the device automatically reboot it self into recovery mode :S
Click to expand...
Click to collapse
Same for me, after wipe and flash it reboot into recovery.
haky 86 said:
That's mean it's a selinux issue, I will check cm-14.1 tree configuration and re-upload only boot image.
Click to expand...
Click to collapse
I recommendyou to use my ESAL kernel, aosp-7.0 branch, it includes the SeLinux patches.
what??? 02-02-2017
juanche007 said:
what??? 02-02-2017
Click to expand...
Click to collapse
It's my fault
panchovix said:
@haky 86 in my case, i installed it on my 4X (che2-l03, hi6210sft), and it shows the logo (not bootanimation), then restarts itself on recovery/twrp
btw, i was using an P8 Lite rom, so i guess that isn't a problem (ALE-L21C432B568)
I don't know if i can do something more to help
Click to expand...
Click to collapse
haky 86 said:
It's my fault
Click to expand...
Click to collapse
Hi @haky 86 is this the newest boot.img with selinux fixed?
https://basketbuild.com/devs/haky86/HuaweiP8Lite/Roms/AOSP/7.1.1/boot
thank u for ur time i'm ready with log cat cause we need to fix more than boot
Spineshankumb said:
Hi @haky 86 is this the newest boot.img with selinux fixed?
https://basketbuild.com/devs/haky86/HuaweiP8Lite/Roms/AOSP/7.1.1/boot
thank u for ur time i'm ready with log cat cause we need to fix more than boot
Click to expand...
Click to collapse
Even with new boot.img device reboots in recovery for me, did you get it working?
Lemon476 said:
Even with new boot.img device reboots in recovery for me, did you get it working?
Click to expand...
Click to collapse
i was making a backup of my current clean ROM so now i will try but i think the error is still the same. Have u flashed using option in TWRP flash img or have u putted it using adb?
Related
Code:
#include
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
First of all i wanna thanks @intervigil aka Ethan Chen who is currently developing cm13 for our ghost and side by side i am also contributing to CM ...so all should be thankful to him
When coming from any other ROM, you must do a factory reset / clean flash.
The first boot can take a very long time. Don't assume that it is a bad flash, boot loop, etc. until it has sat for at least 5 minutes.
Links
ROM: https://download.cyanogenmod.org/?device=ghost
GAPPS: opengapps.org
PROTIP: Be sure to flash gapps at the same time you flash the rom. If you boot into cm-13.0 without gapps and attempt to flash them later, you're going to have a bad time
Working Stuff
SIM
Phone Calls
Text Messaging
Mobile Data
Sensors
WLAN
Bluetooth
Camera
USB / USB-OTG
Doze mode
NFC
Tethering
Known Issues
2G/3G Switch
Video Recording
Flashlight Turns off after few seconds [WIP]
Screencast Doesnt record screen [ Need Updated Media Codecs] [WIP]
At 0% while Charging The Screen gets stuck at bootlogo
Crazy/Inverted Colour While Playing Video Through Instagram
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
XDA:DevDB Information
[ROM][UNOFFICIAL] CyanogenMod 13 For Moto X [12/2/16], ROM for the Moto X
Contributors
Megatron007 , intervigil , @zwliew
Source Code: https://github.com/CyanogenMod/android_kernel_motorola_ghost
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Version Information
Status: Testing
Created 2016-02-12
Last Updated 2016-02-12
Thanks to all my tester - Adriano Martins , Atharva Lele , Yacob , Amar Krishna And Many More
Heyya Guys , I wanna thanks @tycoo for allowing me to post the CM 13/AOSP/MM kernel here
Here is the links - http://romwarehouse.com/megatron007/TycooKernel/
Note its only for CM 13/AOSP/MM
Features - All the features and patches from V1.3,1.2,1.1
ENJOY ,
Great @Megatron007
Sent from my Nexus 5X using Tapatalk
Info
Great Work!
What about GPS, Random Reboots and battery life?
regis88 said:
Great Work!
What about GPS, Random Reboots and battery life?
Click to expand...
Click to collapse
gps untested till now ,,no random reboots ..battery life is great
Great Work!!
Great Work!!
Can I use CM12.1 recovery to flash this rom?
Thanks!!
lucasmarks1991 said:
Great Work!!
Can I use CM12.1 recovery to flash this rom?
Thanks!!
Click to expand...
Click to collapse
yeah but do clean flash
Screenshots??
Congratulations!
How will support the correction of this ROM? Frequency of updates?
rafatosta said:
How will support the correction of this ROM? Frequency of updates?
Click to expand...
Click to collapse
i will do weeklies till the cm nightlies start
hawkdown77 said:
Screenshots??
Click to expand...
Click to collapse
Added just two
@tycoo Waiting To See your MM Kernel
I come from a 4.4.4 stock based rom and I get an infinite boot loop (at the moment 30 minutes and couting) after flashing the rom and gapps all together. I'm using twrp 2.8.7.0 and first I've done a factory reset. Any suggestion or reason because of this?
valeron94 said:
I come from a 4.4.4 stock based rom and I get an infinite boot loop (at the moment 30 minutes and couting) after flashing the rom and gapps all together. I'm using twrp 2.8.7.0 and first I've done a factory reset. Any suggestion or reason because of this?
Click to expand...
Click to collapse
Probably you have to flash first LP.
Getting force close in google card setting when trying now on tap? Im using pico gapps is that why?
@Megatron007 WiFi is wlan?
Sent from my Moto X using XDA Labs
valeron94 said:
I come from a 4.4.4 stock based rom and I get an infinite boot loop (at the moment 30 minutes and couting) after flashing the rom and gapps all together. I'm using twrp 2.8.7.0 and first I've done a factory reset. Any suggestion or reason because of this?
Click to expand...
Click to collapse
dani.galla said:
Probably you have to flash first LP.
Click to expand...
Click to collapse
Thank you, it worked! First I restored an old twrp nandroid backup based on cm12.1 and then I flashed this rom and gapps and it works great .
This note might help somebody else if added to the main post.
requiiiem said:
@Megatron007 WiFi is wlan?
Sent from my Moto X using XDA Labs
Click to expand...
Click to collapse
Yup, everything works great over here.
GPS, Mobile Data, Wi-Fi, Bluetooth. Perfectly fine.
AWESOME
Thinking about last night wifi and bt won't work XD
you're awesome bro.! :b
keep it up good work
CyanogenMod 13 is a free, community built, aftermarket firmware distribution of Android 6.0.x (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, dead cats,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will break it! :P
* Act accordingly
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All bug reports that don't meet this conditions will be ignored:
You have the kernel provided in the zip file
You made a clean flash and didn't restore anything
You made a detailed review of the problem
You provide a logcat in a .txt file (Search on internet)
You provide dmesg or last_kmsg if it is a kernel panic (Search on internet)
! Use the Report BUG section up.
I AM NOW IGNORING EACH AND EVERY SUBMIT WITHOUT THOSE. BUGS REPORTED IN NOT WORKING ARE ALSO IGNORED
What's working :
What's not working :
Nothing tested
Instructions :
Reboot to TWRP 3
Make a full wipe (/system, /data, /cache, /dalvik-cache, /dalvik, all caches) FULL. Do not report not working if you don't do this.
Flash the Cm13 zip and reboot.
!!! NO GAPPS ATM PLEASE. DO NOT REPORT BUGS WITH THEM.
If you like my work consider the coffee here :good: :
If I get enough coffee I might buy a second hand device to finish this faster.
Downloads :
Go up and on the block bar you will see a Download tab. Press that.
Thank you to all donators :
Credits:
@Varcain -> initial L9 II work
All people testing since I don't have this device in my hands.
XDA:DevDB Information
[ROM][Unofficial]CM13 for D605 (L9 II), ROM for the LG Optimus L9 II
Contributors
neutrondev
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP 3
Based On: CyanogenMod
Version Information
Status: Testing
Created 2016-04-03
Last Updated 2016-04-03
Reserved
Rom does't boot, after a few minutes it restarts and goes in recovery.
Mattia990 said:
Rom does't boot, after a few minutes it restarts and goes in recovery.
Click to expand...
Click to collapse
If you say that it is not gonna help in any way. Logcat starts? Did you pull last_kmsg? Instructions about reporting are very clear. If you say that there is no useful information at all. Last_kmsg and if logcat starts logcat please.
download ?
neutrondev said:
If you say that it is not gonna help in any way. Logcat starts? Did you pull last_kmsg? Instructions about reporting are very clear. If you say that there is no useful information at all. Last_kmsg and if logcat starts logcat please.
Click to expand...
Click to collapse
Logcat don't work, but last_kmsg yes... here you are
View attachment last_kmsg.txt
Oohhh man , that's cool ! Haven't tested yet but keep up the good work !
Well, I can install the image(which is already reported to not work), but please tell me what exactly you need from it(e.g logcat or something like that), because I have no experience with android development and I don't know how to debug it
Use logcat when trying to boot not in recovery.
Sent from my LG-H815 using XDA-Developers mobile app
neutrondev said:
Use logcat when trying to boot not in recovery.
Sent from my LG-H815 using XDA-Developers mobile app
Click to expand...
Click to collapse
I tried but computer doesn't recognize the phone with adb
Mattia990 said:
I tried but computer doesn't recognize the phone with adb
Click to expand...
Click to collapse
You now have a boot.img in the Downloads section. Flash the zip then this boot.img and tell me if you have logcat.
dear neutrondev i don't know if you realized but the bootloader on the d605 is locked and impossible to unlock so the twrp is "useless" in comparison to cwm that is "loki-fied"
AWESOME1092387456 said:
dear neutrondev i don't know if you realized but the bootload on the d605 is locked and impossible to unlock so the twrp is "useless" in comparison to cwm that is "loki-fied"
Click to expand...
Click to collapse
Oh. So you have a locked bootloader?
neutrondev said:
Oh. So you have a locked bootloader?
Click to expand...
Click to collapse
Infact i replaced boot.img in the zip, but nothing. ADB(logcat) doesn't work.
Mattia990 said:
Infact i replaced boot.img in the zip, but nothing. ADB(logcat) doesn't work.
Click to expand...
Click to collapse
You replaced it with what?
Sent from my LG-H815 using XDA-Developers mobile app
AWESOME1092387456 said:
dear neutrondev i don't know if you realized but the bootloader on the d605 is locked and impossible to unlock so the twrp is "useless" in comparison to cwm that is "loki-fied"
Click to expand...
Click to collapse
You need to be on V20A aboot right?
To get the custom recovery you need to be on v10a or jelly Bean even if you have root on kitkat it is impossible to get custom recovery(this phone is f-ed up)
Sent from my LG-D605 using Tapatalk
AWESOME1092387456 said:
To get the custom recovery you need to be on v10a or jelly Bean even if you have root on kitkat it is impossible to get custom recovery(this phone is f-ed up)
Sent from my LG-D605 using Tapatalk
Click to expand...
Click to collapse
So you need to be on V10a to have a custom recovery?
You need to downgrade then root with impactor and then you can get custom recoveries
Sent from my LG-D605 using Tapatalk
AWESOME1092387456 said:
You need to downgrade then root with impactor and then you can get custom recoveries
Sent from my LG-D605 using Tapatalk
Click to expand...
Click to collapse
So you need V10 aboot for this loki thing to work. Yes or no?
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
What Is Sensei?
Sensei is a kernel for the Mi4i (ferrari) ported to the Redmi3 (Ido) that is derived from @dh-harald sources. Built with UberTC to ensure the best performance and stability with a highly optimized system. Cherry-picked features & fixes from AOSP, CM and other repos to provide useful and well-tested features that make your phone better. It does not have useless kernel patches or make dangerous or experimental changes to your phone that cause weird or inexplicable problems.
Features
Multirom support
Advanced color control
Doubletap2wake & Sweep2Wake
Fastcharge
Better Ram & Battery Management
Quickwake
Fast bootup (Using all cores)
Better thermal handling
Compability
Sensei is compatible with any rom derived from the CyanogenMod source (CM12.1, CM13, Resurrection Remix) & MIUI
DONATIONS
Sensei is built on open-source software which doesn't allow me to charge it for anything. If you like the kernel and want to donate, here's my paypal email "[email protected]"
Where to download?
Downloads are in the changelog on the 2nd post
How to install?
Download the kernel
Move it to your phone if downloaded from PC
Reboot into recovery
Locate the kernel and install. You don't have to wipe cache/dalvik.
XDA:DevDB Information
Sensei Kernel, Kernel for the Xiaomi Redmi 3
Contributors
haikalizz
Source Code: https://gitlab.com/webhaikal/SenseiIdo
Kernel Special Features:
Version Information
Status: Testing
Created 2016-05-20
Last Updated 2016-05-20
Changelog & Downloads
Sensei 1.0-dev (20/05/2016)
Initial Release
Download: https://www.androidfilehost.com/?fid=24545065934258628
MD5:
Reserved
First! Yes!!!!!!
@Haikailizz this is way beyond awesome
davtse said:
First! Yes!!!!!!
@Haikailizz this is way beyond awesome
Click to expand...
Click to collapse
Time to bring the features...
haikalizz said:
Time to bring the features...
Click to expand...
Click to collapse
Bootloop.
MIUI 6.5.12
Just MI logo
Can you guys try this?
Code:
adb root
adb disable-verity
Tell me if it works. Found this at TWRP thread.
haikalizz said:
Can you guys try this?
Code:
adb root
adb disable-verity
Tell me if it works. Found this at TWRP thread.
Click to expand...
Click to collapse
One moment.
Bootloop too
6.5.12
If bootloop, go into fastboot, reflash recovery, restore previous kernel and it boots normally
davtse said:
If bootloop, go into fastboot, reflash recovery, restore previous kernel and it boots normally
Click to expand...
Click to collapse
Can anybody do
adb root
adb disable-verity
Click to expand...
Click to collapse
My phone dissapere from adb devices after I send
adb root
Click to expand...
Click to collapse
to it
ROM by xiaomi.eu
St.Noigel said:
Can anybody do
My phone dissapere from adb devices after I send
to it
ROM by xiaomi.eu
Click to expand...
Click to collapse
I dont have a Redmi3 to test it out but I'm trying to fix it as best as I can... I'm guessing its mainly because of either partitions or dm-verity... I'm not sure.
You could tryvjust the adb disable-verity only.
Can someone confirm that Doubletap2wake & Sweep2Wake works (if someone managed to flash it) ?
Lightning- said:
Can someone confirm that Doubletap2wake & Sweep2Wake works (if someone managed to flash it) ?
Click to expand...
Click to collapse
CM13 -based RR - bootloop too.
hm
error adb miui 6.5.12.
Stuck at mi logo with cm12.1 nehz build..
@haikalizz may be I can make some log-s for you? Will TWRP log helps in developing?
St.Noigel said:
@haikalizz may be I can make some log-s for you? Will TWRP log helps in developing?
Click to expand...
Click to collapse
Kmsg logs if can, but once you restart phone, those logs are resetted..
haikalizz said:
Kmsg logs if can, but once you restart phone, those logs are resetted..
Click to expand...
Click to collapse
How I can make it?
if I can do it only like here it`s impossible - phone can`t boot (((
ADB from TWRP can`t make it I think
Confirm stuck on MI logo even with Cm12.1 cofface, I can't even go to the recovery with fisical method. Re flashed boot.img from fastboot
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Download:
https://www.androidfilehost.com/?w=files&flid=109243
http://uploaded.net/f/ikvebh
XDA:DevDB Information
FreeXperia Project, ROM for the Sony Xperia Z Ultra
Contributors
matze19999, jerpelea
Source Code: http://fxpblog.co/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: AOSP
Version Information
Status: Testing
Created 2016-09-08
Last Updated 2016-09-08
HOWTO
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from rom zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe
- reboot
for update just flash rom zip from recovery
Google Apps are not included in this ROM. You'll need to find those yourself if you want them.
ENJOY AN UNOFFICIAL AOSP RELEASE BROUGHT TO YOU BY FreeXperia Team
PLEASE DONT MIRROR OUR ROMS
Homepage
www.freexperiaproject.net
Cm14?
I cant see the link
I only found aosp 7
Keyvannn said:
Cm14?
I cant see the link
I only found aosp 7
Click to expand...
Click to collapse
Its AOSP 7
does the camera work?
Zuckerfrei said:
does the camera work?
Click to expand...
Click to collapse
No, camera doesn't work :/
:laugh:Hello Sir.thanks for opening up a thread for us I have this installed on my Ultra I used the fastboot way to install can I install update zips over this fastboot install using my TWRP recovery or do I have to install the aosp recovery from the ROM zip first do you get randomly reboots on this I'm on the 9-06-2016 build
How can I root this?
Flashing the latest SuperSU (0901) results in hanging at the SONY logo, requiring me to reflash System in order to get the phone to boot.
matthewtech770 said:
:laugh:Hello Sir.thanks for opening up a thread for us I have this installed on my Ultra I used the fastboot way to install can I install update zips over this fastboot install using my TWRP recovery or do I have to install the aosp recovery from the ROM zip first do you get randomly reboots on this I'm on the 9-06-2016 build
Click to expand...
Click to collapse
When you say you installed using the fastboot way, other than the boot.img, did you flash system.img as well?
hector67 said:
When you say you installed using the fastboot way, other than the boot.img, did you flash system.img as well?
Click to expand...
Click to collapse
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash userdata userdata.img
Then I disconnected from adb boot into twrp and flash open gapps on my external SD card that is how I did my phone first time what I want to know is when there is new builds on hear how do I update my phone
Does it work for c6802?
Pannam said:
Does it work for c6802?
Click to expand...
Click to collapse
Yes
pTeronaut said:
How can I root this?
Flashing the latest SuperSU (0901) results in hanging at the SONY logo, requiring me to reflash System in order to get the phone to boot.
Click to expand...
Click to collapse
did you flashed 2.78?
matze19999 said:
did you flashed 2.78?
Click to expand...
Click to collapse
I flashed supersu v2.77 and worked very well.
matze19999 said:
did you flashed 2.78?
Click to expand...
Click to collapse
Yes, downloaded from the official supersu thread.
Just have a question here. I installed the first build but there were problems with black screen of death during heavy usage. So i want to ask if the problem is still present in newer build?
Also when i have it installed i noticed that this SoD occur not only when using heavy apps but also when the phone heat up a little, so is there a possibility that the new experimental kernel has some kind of temperature protection that is set too low or possibly broken?
Jecmenn said:
Just have a question here. I installed the first build but there were problems with black screen of death during heavy usage. So i want to ask if the problem is still present in newer build?
Also when i have it installed i noticed that this SoD occur not only when using heavy apps but also when the phone heat up a little, so is there a possibility that the new experimental kernel has some kind of temperature protection that is set too low or possibly broken?
Click to expand...
Click to collapse
yes, this bug does also exist in newer versions...
matze19999 said:
yes, this bug does also exist in newer versions...
Click to expand...
Click to collapse
Hay There do you know if Tap N Pay support will be added to this AOSP rom later on because Android Pay will work if the rom is not rooted:laugh:
Togari 160909
https://www.androidfilehost.com/?fid=24694152805485070
There is a way seen frequent updates to avoid losing the applications installed by flashing the AOSP
---------- Post added at 05:49 PM ---------- Previous post was at 05:28 PM ----------
Keyvannn said:
Togari 160909
https://www.androidfilehost.com/?fid=24694152805485070
Click to expand...
Click to collapse
I wanted to thank the developers for the work of this beautiful rom
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my build for the A310, A510, and A710,
most problems are already solved.
Here you can see how far everything is working for now.
Spoiler: Whats working
Boot
Audio
Bluetooth
Graphics
Cameras
Wifi
USB
Video playback (HW/SW)
Tethering via USB
OTA-Updates
RIL
Mobile data
GPS
DRM
Tethering via WIFI and Bluetooth
much more...
Spoiler: Whats not working
Sensors
Audio server is crashing in a phone call for a5 and a7
Date usage because of missing eBPF
Spoiler: Links
TWRP a3xelte
TWRP a5xelte
TWRP a7xelte
ROM
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
Spoiler: How to install it?
Instructions (for S3, simply use the files for your device)
XDA:DevDB Information
[ROM][13.x][a3xelte a5xelte a7xelte][ALPHA] LineageOS 20, ROM for the Samsung Galaxy A3, A5 and A7 ( A310, A510, and A710)
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 13.x T
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.5.2
Based On: LineageOS
Thanks
danwood76 for the great work for these devices
The LineageOS team
And all others who have contributed to the Exynos projects past and present
Version Information
Status: Alpha
Created 2022-11-30
Last Updated 2022-11-30
I need testers to fix the sensors, please write me a PM.
I can't wait to try it on the A3 2016 phone, which I put on the shelf after buying a new phone. When will the HTML video come to the YouTube channel
yoooo great work!!!!!
i compiled TWRP 3.7.0-11.0 for A310F, anybody wanna test? it's still in a testing stage
Tried to upgrade a3 from 19 to 20. But stuck in twrp updating. Flashed IMG file too recovery partition. Then tried to reboot into recovery.
From that point I only see Samsung logo boot screen. Any long press button combo just vibrates and reboots that screen.
Any idea to debrick?
kurtn said:
Tried to upgrade a3 from 19 to 20. But stuck in twrp updating. Flashed IMG file too recovery partition. Then tried to reboot into recovery.
Click to expand...
Click to collapse
notnoelchannel said:
yoooo great work!!!!!
i compiled TWRP 3.7.0-11.0 for A310F, anybody wanna test? it's still in a testing stage
Click to expand...
Click to collapse
Did you try this one?
It should work to get into the download mode, try to press the button combination as long as needed,
it also could help to attach the usb charger to switch it off..
Then unplug it and give it another try to boot into the download mode and reflash a working TWRP.
html6405 said:
Did you try this one?
Click to expand...
Click to collapse
i didn't upload the twrp 3.7.0-11.0 anywhere, it's a private build. needs some fixes
kurtn said:
Tried to upgrade a3 from 19 to 20. But stuck in twrp updating.
Click to expand...
Click to collapse
can you attempt a clean install? if not, please try.
kurtn said:
Flashed IMG file too recovery partition. Then tried to reboot into recovery.
From that point I only see Samsung logo boot screen. Any long press button combo just vibrates and reboots that screen.
Click to expand...
Click to collapse
what recovery did you flash after twrp? LOS 20.0 recovery? if did, please reflash twrp 3.6.2 and attempt a clean install
notnoelchannel said:
i didn't upload the twrp 3.7.0-11.0 anywhere, it's a private build. needs some fixes
can you attempt a clean install? if not, please try.
what recovery did you flash after twrp? LOS 20.0 recovery? if did, please reflash twrp 3.6.2 and attempt a clean install
Click to expand...
Click to collapse
I cant do anything. I wait now for the battery to drain to shutdown.
I tried to install OP linked
Samsung Galaxy A3 2016 (Exynos)
Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me
kurtn said:
I cant do anything. I wait now for the battery to drain to shutdown.
I tried to install OP linked
Samsung Galaxy A3 2016 (Exynos)
Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me
Click to expand...
Click to collapse
Use vol down+home+power to force reboot, then try to install twrp 3.5.2
notnoelchannel said:
Use vol down+home+power to force reboot, then try to install twrp 3.5.2
Click to expand...
Click to collapse
Thank you. I made the mistake of releasing power button as soon as screen went dark.
So. Dirty upgrade worked. Signature spoofing not yet.
What sensors are to test?
Edit: all Sensors I tested work. Signature spoofing is only for system apps. Minmicrog CLI works.
How's performance? There's no way Android 13 is actually usable. How bad is performance with gapps?? This ****'s insane, once audio works I'll give this a shot. Keep up the good work!
HeladeraDragon said:
How's performance? There's no way Android 13 is actually usable. How bad is performance with gapps?? This ****'s insane, once audio works I'll give this a shot. Keep up the good work!
Click to expand...
Click to collapse
performance is the same like on android 12, i didn't test with gapps
Is it usable?
kurtn said:
So. Dirty upgrade worked. Signature spoofing not yet.
What sensors are to test?
Edit: all Sensors I tested work. Signature spoofing is only for system apps. Minmicrog CLI works.
Click to expand...
Click to collapse
Really? That's great, which version did you test?
The one in the main download folder or the one in the test folder?
Could someone test the a7 builds and report?
I've also created two builds, one with maybe not working sensors and another one in the test folder.
html6405 said:
Really? That's great, which version did you test?
The one in the main download folder or the one in the test folder?
Could someone test the a7 builds and report?
I've also created two builds, one with maybe not working sensors and another one in the test folder.
Click to expand...
Click to collapse
Normal build. It was like a week old when I installed it.
kurtn said:
Normal build. It was like a week old when I installed it.
Click to expand...
Click to collapse
Ok that's good to know,
could you also test the other build?
It could be that you will face a bootloop but idk.
But if you confirm that the normal build has working sensors, I'm already happy.
html6405 said:
Ok that's good to know,
could you also test the other build?
It could be that you will face a bootloop but idk.
But if you confirm that the normal build has working sensors, I'm already happy.
Click to expand...
Click to collapse
So they have identical file names? Only the test build is a few kilobytes larger.
No boot loop. Just stuck in boot animation for 10 minutes now. (Dirty flashed test over normal 20.0)
TheRain12 said:
I can't wait to try it on the A3 2016 phone, which I put on the shelf after buying a new phone. When will the HTML video come to the YouTube channel
Click to expand...
Click to collapse
Just tested: installation works without YouTube as well. Maybe better
kurtn said:
No boot loop. Just stuck in boot animation for 10 minutes now. (Dirty flashed test over normal 20.0)
Click to expand...
Click to collapse
Thanks, that's what I feared, but if you can confirm again, that really all sensors are working with the other build,
I'm happy.