FLASHING STOCK JELLYBEANHey guys, i have seen that a lot of people want to downgrade to jellybean 4.3 and facing a "fail" in Odin. so i'm creating this thread to overcome that problem.
Most importantly, clear the data of your phone before you flash the stock JellyBean. Otherwise you will face a bootloop.
Step-1: Download the following required files.
(All links are from my AndroidFileHost account so you dont have to login for any kind of websites)
Samsung USB drivers(for G7102 only): https://www.androidfilehost.com/?fid=24459283995316252
Odin: https://www.androidfilehost.com/?fid=24459283995316253
JellyBean firmware: https://www.androidfilehost.com/?fid=24459283995316591
Step-2: The actual flashing.
>Extract SAMSUNG_USB_DRIVERS_FOR_MOBILE_PHONES.ZIP AND INSTALL THE DRIVERS.
>Extract the Firmware file.
>Extract Odin ZIP file.
>Open Odin v3.10.7 folder and run Odin3 v3.10.7.exe.
>Reboot Phone in Download Mode by pressing and hold Home + Power + Volume Down buttons.
>Connect phone and wait until you get a blue sign in Odin.
Note: If you didnt get the blue sign, you did not install samsung drivers properly.
>Add the firmware file to AP / PDA.
>Make sure re-partition is NOT ticked.
>Go to options tab and select nand erase all (this is very important).
>Click the start button, sit back and wait few minutes.
Voila. You successfully flashed stock JellyBean on your samsung galaxy grand 2 (SM-G7102)
This worked on my device. and my friend's devices. i have tried in 2-3 devices. If u still fail to flash and brick your device im not responsible.
Firmware link updated.. if any1 tries, do respond here...
downgrading stable http://4pda.ru/forum/index.php?s=&showtopic=595850&view=findpost&p=35653052
i heard this method from someone...but the difference was that he told me to check the 'bootloader update' option also..is it ok?
Related
Help Please?
I had my Galaxy Pocket rooted and got the Jellyblast v3 rom, it was doin fine until I checked on the app OTA and check for update, a new update appeared which is the Nemesis 2.5 Hybrid-Holo Editon. It asked me to download it and so I did. When it was done, it asked me if I wanted to install it and so I did, and rebooted. Later I noticed that it was already boot looping. I tried pulling the battery off and to clockwork mode, with the proper procedure..the holds and presses, but still it just kept boot looping. Tried to connect it to the PC using the USB chord and yet it just shows the charging icon and sooner it turns to white. I tried Kies but still it turned white screen all over again; no device found.
Can someone PLEASE help me with this one? PLEASE, PLEASE guys? I know you guys are knowledgable on these kind of issues. :crying:
ShogunSam said:
Help Please?
I had my Galaxy Pocket rooted and got the Jellyblast v3 rom, it was doin fine until I checked on the app OTA and check for update, a new update appeared which is the Nemesis 2.5 Hybrid-Holo Editon. It asked me to download it and so I did. When it was done, it asked me if I wanted to install it and so I did, and rebooted. Later I noticed that it was already boot looping. I tried pulling the battery off and to clockwork mode, with the proper procedure..the holds and presses, but still it just kept boot looping. Tried to connect it to the PC using the USB chord and yet it just shows the charging icon and sooner it turns to white. I tried Kies but still it turned white screen all over again; no device found.
Can someone PLEASE help me with this one? PLEASE, PLEASE guys? I know you guys are knowledgable on these kind of issues. :crying:
Click to expand...
Click to collapse
I also received the same message and downloaded the update file. when ask to Reboot & Install i selected install the device booted in CWM and i selected update from .zip and selected the downloaded file in OTA Download Folder.
The update was successful, yet the ROM looks in BETA version.
Following are the issues i am currently facing in the updated ROM
1. Gallery ICS was Force Closed, later it was solved via uninstalling update.
2. Quick Panel, Nemesis Hub, Nemesis Owner Info & Nemesis Sound Boosters are giving FC messages.
3. OTA is giving INVALID ROM Message while updating.
I´m having the same issues.
After downloading and installing the OTA update, my device is keep stucking in the boot loop.
When I do to the recovery, I always get automatic update with the update.zip, which means I can't get into the full recovery to select another functional image.
Well I hope it's not bricked. Is there a sollution?
Thanks
I have repaired that throught ODIN MODE, like described here:
http://forum.xda-developers.com/showthread.php?t=1921421&highlight=s5300
ShogunSam said:
Help Please?
I had my Galaxy Pocket rooted and got the Jellyblast v3 rom, it was doin fine until I checked on the app OTA and check for update, a new update appeared which is the Nemesis 2.5 Hybrid-Holo Editon. It asked me to download it and so I did. When it was done, it asked me if I wanted to install it and so I did, and rebooted. Later I noticed that it was already boot looping. I tried pulling the battery off and to clockwork mode, with the proper procedure..the holds and presses, but still it just kept boot looping. Tried to connect it to the PC using the USB chord and yet it just shows the charging icon and sooner it turns to white. I tried Kies but still it turned white screen all over again; no device found.
Can someone PLEASE help me with this one? PLEASE, PLEASE guys? I know you guys are knowledgable on these kind of issues. :crying:
Click to expand...
Click to collapse
I have the exact problem. I just can not do anything.No connection to PC I dont know what to d.o Did you solve the problem ShougunSam?
I get the exact same error, and its annoying because I cant use my phone! If anyone can help us.. thanks
Rawhabbero said:
I get the exact same error, and its annoying because I cant use my phone! If anyone can help us.. thanks
Click to expand...
Click to collapse
For all the SGY Users who are facing issues after updating Jellyblast 3.5 to Nemesis (I faced it too) here is the guide to recover your phone:-
First to repair your phone you have to flash stock rom via odin .
Here's the guide for Flashing Stock Rom via Odin
Requirement: 1. A Samsung Galaxy y phone model gt-s5360.
2. A computer running on windows xp, vista, win7 or win8 with proper USB driver installed to connect your phone to computer {If you have not installed USB Driver for Samsung Galaxy Y then to Install USB Driver}
3. Stock Rom file : you can download stock rom according to your choice and region from the xda thread http://forum.xda-developers.com/showthread.php?t=1465800e
4. download ODIN: 1 .85.(google it as i cannot post outside links)
Installation Instruction : [ Charge your phone battery min 80%]
1. Download the required file Odin AND Stock Rom. zip and place in a folder on your desktop .
2. Now extract both with any file extractor.-- Odin v1 .85 .zip and the stock rom zip( file which contains the stock rom i. e 2 .3 .6 )
After that extract Stock Rom file after unzipping you will get three files :
PDA _S5360 _DDLK2.tar,
MODEM_ S5360 _DDLK2.tar &
CSC_S 5360 _DDLK2 .tar
3. Now turn off your Galaxy Y {Remove the battery for 5 -10 seconds and insert it back }
4. Go to Download Mode by Pressing Volume down + Home + Power for 5- 10 sec to boot in Download Mode
5. Now you entered in Download mode select continue by pressing Volume up button .
6. Now attach/ connect your phone to computer via USB cable .
7. Now on your computer open Odin v 1 .85. exe
8.Now make sure you are getting yellow box in ID:COM ( this means that your device is now connected and detected by odin )
9.Now Select those 3 files u download before
PIT - "totoro_0623.pit"
BOOTLOADER - "BOOT" file.
PDA - "PDA" file.
PHONE - "MODEM" file.
CSC - "GT-s5360- MULTI-CSC" file.
10.Now clik on start .
And let be ODIN do its work and wait till you see PASS in green colour it mean the flashing process is complete successfully . Samsung
11.Remove your phone from pc 12.Galaxy Y will auto reboot .
Now if you want to install nemesis Rom, you have to install the nemesis Rom 2.0 (Nemesis Titanium) first and than you should update the Rom by downloading the update file via OTA and flashing the zip file through CWM.
I hope my suggestion will solve your problem.
Did you wipe data and wipe catch before installing ROM??
Did you try flashing original ROM with Odin or others??
---------- Post added at 07:53 PM ---------- Previous post was at 07:48 PM ----------
chaos titan said:
did you wipe data and wipe catch before installing rom??
did you try flashing original rom with odin or others??
Click to expand...
Click to collapse
plz reply
thanks
thepain20 said:
For all the SGY Users who are facing issues after updating Jellyblast 3.5 to Nemesis (I faced it too) here is the guide to recover your phone:-
First to repair your phone you have to flash stock rom via odin .
Here's the guide for Flashing Stock Rom via Odin
Requirement: 1. A Samsung Galaxy y phone model gt-s5360.
2. A computer running on windows xp, vista, win7 or win8 with proper USB driver installed to connect your phone to computer {If you have not installed USB Driver for Samsung Galaxy Y then to Install USB Driver}
3. Stock Rom file : you can download stock rom according to your choice and region from the xda thread http://forum.xda-developers.com/showthread.php?t=1465800e
4. download ODIN: 1 .85.(google it as i cannot post outside links)
Installation Instruction : [ Charge your phone battery min 80%]
1. Download the required file Odin AND Stock Rom. zip and place in a folder on your desktop .
2. Now extract both with any file extractor.-- Odin v1 .85 .zip and the stock rom zip( file which contains the stock rom i. e 2 .3 .6 )
After that extract Stock Rom file after unzipping you will get three files :
PDA _S5360 _DDLK2.tar,
MODEM_ S5360 _DDLK2.tar &
CSC_S 5360 _DDLK2 .tar
3. Now turn off your Galaxy Y {Remove the battery for 5 -10 seconds and insert it back }
4. Go to Download Mode by Pressing Volume down + Home + Power for 5- 10 sec to boot in Download Mode
5. Now you entered in Download mode select continue by pressing Volume up button .
6. Now attach/ connect your phone to computer via USB cable .
7. Now on your computer open Odin v 1 .85. exe
8.Now make sure you are getting yellow box in ID:COM ( this means that your device is now connected and detected by odin )
9.Now Select those 3 files u download before
PIT - "totoro_0623.pit"
BOOTLOADER - "BOOT" file.
PDA - "PDA" file.
PHONE - "MODEM" file.
CSC - "GT-s5360- MULTI-CSC" file.
10.Now clik on start .
And let be ODIN do its work and wait till you see PASS in green colour it mean the flashing process is complete successfully . Samsung
11.Remove your phone from pc 12.Galaxy Y will auto reboot .
Now if you want to install nemesis Rom, you have to install the nemesis Rom 2.0 (Nemesis Titanium) first and than you should update the Rom by downloading the update file via OTA and flashing the zip file through CWM.
I hope my suggestion will solve your problem.
Click to expand...
Click to collapse
IT STILL DOES NOT WORK! I flashed the device, and this is what i get every time! WHAT AM I DOING WRONG?
How to flash I9082XXUBMF2 Android 4.2.2 Jelly Bean on Samsung Galaxy Grand Duos GT-I9082 device:
Download the leak Android 4.2.2 Jelly Bean I9082XXUBMF2 file from here "https://hotfile.com/dl/233057193/bed43fc/I9082XXUBMF2_I9082OXABMF2_OXA.rar.html?expire=1" and save it in your PC.
Now, extract the downloaded file and get a tar.md5 file together with a few other files.
Download Odin 3.07 , save it on the PC, extract its content and get Odin 3 v3.07 exe file and other some files.
Power off complete the Samsung Galaxy Grand device.
Now, boot the smartphone into Download Mode. To do that press and keep holding the Home + Power + Volume Down buttons on the same time.
Open Odin3 v3.07.exe file with the administrator rights.
Next, connect the Samsung Galaxy Grand device to PC, for making this use the USB cable while the device is in Download mode.
Now, just look on the Odin interface to make sure that the ID: COM box turn yellow with the proper COM port number and an Added message will be displayed, that means the smartphone is connected successfully,
In case the Added message isn’t displayed try to connect the device on another USB port. If the Odin application still fails to recognize the connection between the device and PC re-install the suitable USB driver once again.
Now, after the connection between Android device and PC is successfully realized, and the ODIN confirmed that you have to select these files extracted from I9082XXUBMF2 folder to flash the same on the smartphone:a) From ODIN click the PDA button, search and load the .tar.md5 file
b) Now, click the Phone button, search and load the file with MODEM in its name.
c) Next, click the CSC button and load the file with CSC in its name.
d) Click the PIT button from ODIN, search and load the .pit file.
Note: Ignore these steps in case the file from step b, c and d isn’t existing.
Important: You have to configure the Odin settings. In ODIN window make sure that the Auto Reboot and F.Reset Time checkboxes are selected. Uncheck the Re-Partition option from ODIN window select it, only in case a .pit file is being used (loaded previously).
Now, when you want to start the installation process, click the Start button in Odin app.
The flashing process should start immediately, and you need to wait about few minutes to be done.
Now, when flashing process is successfully completed, the ODIN app will say a PASS message with a green background very top of the Odin app, and the Samsung Galaxy Grand device will restart automatically.
After restart, you can disconnect safety the USB cord from the PC.
Congratulation, now the Samsung Galaxy Grand Duos should running on the leaked official Android 4.2.2 XXUBMF2 Jelly Bean firmware.
Verify if the new firmware is running on the smartphone, to do that navigate to the following path Settings>> About phone and note down the firmware version running on the smartphone.
Troubleshooting:
In case the Android device gets stuck at the first booting animation or it is entering on a bootloop you have to do:
Place the device in the recovery mode, to do this press and keep holding the Home+ Power + Volume UP buttons on the same time.
Now, from the Recovery Mode select Wipe data/factory reset and after that select wipe cache partition option.
Next, back on the main menu of Recovery Mode and from there select reboot system now option.
Dont forget to hit thanx
Wat about my warrenty after update?
Sent from my GT-I9082 using xda premium
tanmay5 said:
How to flash I9082XXUBMF2 Android 4.2.2 Jelly Bean on Samsung Galaxy Grand Duos GT-I9082 device:
Download the leak Android 4.2.2 Jelly Bean I9082XXUBMF2 file from here "https://hotfile.com/dl/233057193/bed43fc/I9082XXUBMF2_I9082OXABMF2_OXA.rar.html?expire=1" and save it in your PC.
Now, extract the downloaded file and get a tar.md5 file together with a few other files.
Download Odin 3.07 , save it on the PC, extract its content and get Odin 3 v3.07 exe file and other some files.
Power off complete the Samsung Galaxy Grand device.
Now, boot the smartphone into Download Mode. To do that press and keep holding the Home + Power + Volume Down buttons on the same time.
Open Odin3 v3.07.exe file with the administrator rights.
Next, connect the Samsung Galaxy Grand device to PC, for making this use the USB cable while the device is in Download mode.
Now, just look on the Odin interface to make sure that the ID: COM box turn yellow with the proper COM port number and an Added message will be displayed, that means the smartphone is connected successfully,
In case the Added message isn’t displayed try to connect the device on another USB port. If the Odin application still fails to recognize the connection between the device and PC re-install the suitable USB driver once again.
Now, after the connection between Android device and PC is successfully realized, and the ODIN confirmed that you have to select these files extracted from I9082XXUBMF2 folder to flash the same on the smartphone:a) From ODIN click the PDA button, search and load the .tar.md5 file
b) Now, click the Phone button, search and load the file with MODEM in its name.
c) Next, click the CSC button and load the file with CSC in its name.
d) Click the PIT button from ODIN, search and load the .pit file.
Note: Ignore these steps in case the file from step b, c and d isn’t existing.
Important: You have to configure the Odin settings. In ODIN window make sure that the Auto Reboot and F.Reset Time checkboxes are selected. Uncheck the Re-Partition option from ODIN window select it, only in case a .pit file is being used (loaded previously).
Now, when you want to start the installation process, click the Start button in Odin app.
The flashing process should start immediately, and you need to wait about few minutes to be done.
Now, when flashing process is successfully completed, the ODIN app will say a PASS message with a green background very top of the Odin app, and the Samsung Galaxy Grand device will restart automatically.
After restart, you can disconnect safety the USB cord from the PC.
Congratulation, now the Samsung Galaxy Grand Duos should running on the leaked official Android 4.2.2 XXUBMF2 Jelly Bean firmware.
Verify if the new firmware is running on the smartphone, to do that navigate to the following path Settings>> About phone and note down the firmware version running on the smartphone.
Troubleshooting:
In case the Android device gets stuck at the first booting animation or it is entering on a bootloop you have to do:
Place the device in the recovery mode, to do this press and keep holding the Home+ Power + Volume UP buttons on the same time.
Now, from the Recovery Mode select Wipe data/factory reset and after that select wipe cache partition option.
Next, back on the main menu of Recovery Mode and from there select reboot system now option.
Dont forget to hit thanx
Click to expand...
Click to collapse
Hey man i wiped my data and cache partition but even after that it gets stucked what should i do?
Sent from my GT-I9082 using xda premium
i have been following steps in this thread http://forum.xda-developers.com/showpost.php?p=33305784&postcount=2&nocache=1&z=5264202383282762
phone is constantly in download mode, and odin program looks like this https://www.dropbox.com/s/3mlc1ogy3ltxwgi/Screenshot 2014-07-18 15.08.09.png
i left it alone for over half an hour and tried multiple times putting auto reboot on and off. Any advice?
i also tried a different port, using the original cable, developer mode, reinstalled drivers, and tried an older version of odin... nothing seems to work
even Kies can't connect to my phone
Try This
darkmayhem said:
i also tried a different port, using the original cable, developer mode, reinstalled drivers, and tried an older version of odin... nothing seems to work
even Kies can't connect to my phone
Click to expand...
Click to collapse
Try This....http://forum.xda-developers.com/galaxy-s3/help/root-s3-whitout-count-binary-t2820855
darkmayhem said:
i have been following steps in this thread http://forum.xda-developers.com/showpost.php?p=33305784&postcount=2&nocache=1&z=5264202383282762
phone is constantly in download mode, and odin program looks like this https://www.dropbox.com/s/3mlc1ogy3ltxwgi/Screenshot 2014-07-18 15.08.09.png
i left it alone for over half an hour and tried multiple times putting auto reboot on and off. Any advice?
Click to expand...
Click to collapse
hey mate. Use chairfire autoroot to root your s3.
I used it too to root my phone. It is best way.
Just goto chaifire website (google it) -> download the autoroot for your variant -> download Odin (I think it come inside autoroot zip) -> extract the zip -> you will find a .tar file -> put your phone in download mode by pressing vol down + home button + power and press volume up key -> connect your phone in your computer and let it install necessary driver. if the drivers were installed properly you will see COM id in odin. Only proceed if you see COM id. -> click on PDA and select the .tar that we extracted before -> just don't touch anything inside odin and click on start. Wait until odin say finished but dont disconnect the phone.
after the odin process there will be some process done in your phone so wait until your phone completely reboots and you see the SU app in your app drawer.
Now disconnect your phone.
Your phone will be rooted mate.
If you wanna experience s5 in your s3 then download the S5 sensation custom rom from the very great dev @sunajkram23. He has developed s5 rom with all its features and funtion for s3.
Before you flash any custom rom, you have a flash a custom recovery. I am using latest touch CWM recovery ( google it ) and download .tar file and then flash through odin ( same procedure to flash as I stated above ).
---------- Post added at 04:36 PM ---------- Previous post was at 04:36 PM ----------
hey mate. Use chairfire autoroot to root your s3.
I used it too to root my phone. It is best way.
Just goto chaifire website (google it) -> download the autoroot for your variant -> download Odin (I think it come inside autoroot zip) -> extract the zip -> you will find a .tar file -> put your phone in download mode by pressing vol down + home button + power and press volume up key -> connect your phone in your computer and let it install necessary driver. if the drivers were installed properly you will see COM id in odin. Only proceed if you see COM id. -> click on PDA and select the .tar that we extracted before -> just don't touch anything inside odin and click on start. Wait until odin say finished but dont disconnect the phone.
after the odin process there will be some process done in your phone so wait until your phone completely reboots and you see the SU app in your app drawer.
Now disconnect your phone.
Your phone will be rooted mate.
If you wanna experience s5 in your s3 then download the S5 sensation custom rom from the very great dev @sunajkram23. He has developed s5 rom with all its features and funtion for s3.
Before you flash any custom rom, you have a flash a custom recovery. I am using latest touch CWM recovery ( google it ) and download .tar file and then flash through odin ( same procedure to flash as I stated above ).
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
crystysor1 said:
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
Click to expand...
Click to collapse
Samsung USB Drivers
Odin3 v3.07
KU1.9_SM-G318H_4.4.4.tar (recovery+cache)
Root include standalone KingoUser 1.9 apk.
Work on Android 4.4.4
Build: G318HXCU0AOE5
Kernel: 3.10.17-589709
Serial: KTU84P.G318HXCU0AOE8
hello,
can you post the steps in order to root the SM-G318H ?
thanks !
Hi, Where is the file?
I don't found...
Well so let's go for a step by step.
WARNING: Warranty will be definitly remove after rooting your phone !
You need an USB data cable, generally provided with phone pack.
1 - Download Samsung USB Drivers and install it.
It can be found on official Samsung Developers website [Not enough right to post links].
2 - Download Odin3 v3.07, can be found everywhere !
3 - Download KU1.9_SM-G318H_4.4.4.tar [Not enough right to post links].
4 - Connect the phone and power it up in Odin mode by pressing Volume down + home + Power.
5 - Start Odin3 exe and load the tar file into PDA, only Auto Reboot will be checked in Option section.
6 - When Odin has find the ID:COM press Start.
Phone automatically reboot in KingoRoot recovery mode to install root service and KingoUser 1.9 apk, it's take about 30 sec and then auto reboot in normal way.
Done with no datas loss (backup them before in case of), you can upgrade KingoUser 1.9 to the latest 2.0.2.
Be aware that the phone still has Kingo recovery image and you can't have a recovery mode [Volume up + home + power] for update.zip, clear/wipe data, etc...
To grant this, put back original recovery PDA file image with Odin (step 4 to 6).
It can be extract from official firmware (recovery.img) and repack into tar/tar.md5 file for PDA.
Feedbacks and thanks are welcome.
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
crystysor1 said:
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
Click to expand...
Click to collapse
hi i would like very much you could give me the KU1.9_SM-G318H_4.4.4.tar
because i seem unable to find it... =(
plz help the world!!!!! =)
thank you very much Mr. Madgik nop90
:good:
AutoROOT Galaxy Trend 2 Lite SM-G318H
After work self made can be found here
AutoROOT: KU1.9_SM-G318H_4.4.4.tar
MD5: 360F5D6703412A5E9D8F77CC4EA6AD35
Size: 22.5 Mo - 23 633 920 octets
ge.tt/89u6oOO2
See you soon . . .
thank's
crystysor1 said:
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
Click to expand...
Click to collapse
I rooted my Trend 2 lite SM-G318H with Kingo root for Windows.
It took a long time, but succeeded fine.
Cheers.
Madgik nop90 said:
After work self made can be found here
AutoROOT: KU1.9_SM-G318H_4.4.4.tar
MD5: 360F5D6703412A5E9D8F77CC4EA6AD35
Size: 22.5 Mo - 23 633 920 octets
ge.tt/89u6oOO2
See you soon . . .
Click to expand...
Click to collapse
hi, do you think it will work for my Galaxy Ace 4 Neo G318H?
someone managed to do the root ? Samsung G318H trend lite 2?
the metode was described in post nr5 working on my sm g318h phone thank you
KU1.9_SM-G318H_4.4.4.tar
can someone send me this file ????? please so much
Don't really see the point as there are no roms out for this phone to install or am I missing something, can certain roms cooked for other Galaxy devices be installed?
I have a question
Madgik nop90 said:
Well so let's go for a step by step.
WARNING: Warranty will be definitly remove after rooting your phone !
You need an USB data cable, generally provided with phone pack.
1 - Download Samsung USB Drivers and install it.
It can be found on official Samsung Developers website [Not enough right to post links].
2 - Download Odin3 v3.07, can be found everywhere !
3 - Download KU1.9_SM-G318H_4.4.4.tar [Not enough right to post links].
4 - Connect the phone and power it up in Odin mode by pressing Volume down + home + Power.
5 - Start Odin3 exe and load the tar file into PDA, only Auto Reboot will be checked in Option section.
6 - When Odin has find the ID:COM press Start.
Phone automatically reboot in KingoRoot recovery mode to install root service and KingoUser 1.9 apk, it's take about 30 sec and then auto reboot in normal way.
Done with no datas loss (backup them before in case of), you can upgrade KingoUser 1.9 to the latest 2.0.2.
Be aware that the phone still has Kingo recovery image and you can't have a recovery mode [Volume up + home + power] for update.zip, clear/wipe data, etc...
To grant this, put back original recovery PDA file image with Odin (step 4 to 6).
It can be extract from official firmware (recovery.img) and repack into tar/tar.md5 file for PDA.
Feedbacks and thanks are welcome.
Click to expand...
Click to collapse
You said: "Be aware that the phone still has Kingo recovery image and you can't have a recovery mode [Volume up + home + power] for update.zip, clear/wipe data, etc...
To grant this, put back original recovery PDA file image with Odin (step 4 to 6).
It can be extract from official firmware (recovery.img) and repack into tar/tar.md5 file for PDA."
After doing the root, can I update my phone??????
If the answer of this question is no, can you post a link to another file that doesn't do that?
Can any one please help me root my samsung galaxy trend neo SM-G318H
BASEBAND VERSION SM-G318HXCU0AOG2
Root Samsung Galaxy Trend 2 lite - SM-G318H android version 4.4.4
ROOT for all Samsung SM-G318H android version 4.4.4 Phones.
WARNING: Warranty will definitely be void after rooting your phone !
You need an USB data cable, generally provided with phone pack.
Requirements before rooting process.
A - Enable usb debugging mode on your phone.
B - Check if trust from Unknown Sources is enabled on your phone.
C - Download Samsung USB Driver for Mobile Phones and install it.
D -When connecting your phone your PC must give some notification that you connected your phone.
Rooting
1 - Download Odin3 v3.10.6 latest version.
2 - Locate and Download SM-G318H_4.4.4cokbasit.org.tar (i can't submit a direct download link as Junior Member)
3 - Start (Run as Administrator) Odin3 v3.10.6.exe and click on the --> CP <-- button to select and load the downloaded tar file into Odin. Make No Mistake you must see the path of the downloaded tar file after the checked CP checkbox.
(Using an older version of Odin click on the --> PHONE <--button to select and load the downloaded tar file into Odin. Make a No Mistake you must see the path of the downloaded tar file after the checked PHONE checkbox)
4 -Boot your disconnected SM-G318H phone into Download Mode by pressing Volume down + home + Power together (long press until the boot screen appear). A warning message will flash, now press Volume Up key to proceed to Download Mode. Now connect your SM-G318H phone, in Odin you should see a highlighted COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. That means Odin has successfully detected your SM-G318H phone at a ID:COM Port if not the Case keep on trying, Or find a better tutorial about Odin flashing. Now quick proceed to installation Press Start.
5 - Once completed, you would see “PASS!” message in ID:COM.
6 - Your SM-G318H Phone should automatically reboot after completion And You have ROOT
Including SuperUser ase Root Access Manager for your SM-G318H phone.
download==> 4.4.4cokbasit.org.tar
mediafire.com/download/moj58dj0rkw0jif/SM-G318H_4.4.4cokbasit.org.tar
Tweak your Rooted SM-G318H to absolute top performance. I recommend the Ultimate Utility PowerToolbox a MustHave for android PowerUsers the All-In-One Toolbox containing a lot Powerful system utilities (google playstore). Warning don't apply risky changes that can seriously mash up (brick) your phone or resulting in a unstable frequently crashing system. Some changes can't be rolled back. So only apply risky changes with outstanding knowledge of the android system. Otherwise you have flash the (original) Stock firmware including the root tar for SM-G318H again and reinstall all your apps.
All-In-One Toolbox APK==> imoblife.toolbox.full-5.2.9.1.apk
Feedbacks and thanks are welcome
Mine is not either of those. It's Galaxy Trend Neo! Will this steps work? How do i go about rooting it if the steps provided wont help? ?
skullhack said:
Mine is not either of those. It's Galaxy Trend Neo! Will this steps work? How do i go about rooting it if the steps provided wont help?
Click to expand...
Click to collapse
Yes ROOT for every SM-G318H device! Unfortunately i still can't submit a direct download link for the SM-G318H_4.4.4cokbasit.org.tar File Essential for ROOT on SM-G318H devices. Follow the steps and you will have ROOT on your SM-G318H phone.
mediafire.com/download/moj58dj0rkw0jif/SM-G318H_4.4.4cokbasit.org.tar
Download from there.
Feedbacks and thanks are Welcome
Let me get the package. Will get back to you.
My samsung phone has got stuck onh
homescreen just after logo showing
invalid kernel length
How can i recover this phone
The phone has been brought from India
Should there be the need to flash the
phone?
If yes where can i find the firmware for
the above mentioned model.
Kindly advice.
Greetings, @su2674raj
The answer is simple!
"Flash stock ROM"
There is a way to flash the firmware again. First unlock your bootloader
Requirements: A PC of course, A working USB cable, your A10, unlocked bootloader, Odin 3 or Higher, and a mind, some patience.
I am not responsible for bricking your device.
This is how to unlock bootloader. I just chooses a random YouTube video I don't own any content I WILL SEND.
Galaxy A series bootloader unlock:
Downloading "Samsung Odin"
Then download "Samsung Odin" to your PC. I prefer latest version.
Odin download link: https://odindownload.com/
Galaxy A10 firmware
Then download the Samsung Galaxy A10
firmware.
Galaxy A10 firmware: https://samfrew.com/fr/download/Galaxy__A10__/f4ji/PAK/A105FDDU3BTF1/A105FOJM3BTF1/
You can back if this isn't your A10 version and choose another one from the site bellow.
Now shut your A10 down. (To shut it down just hold volume down and power for more than 10 seconds. Now hold both volume keys while device is off... Then connect USB cable. Allow the download mode thing. And when it say "downloading" you will see a yellow thing appears in "Odin" tool.
Now... Unzip the firmware and open Odin.
The files inside the zip will start with something like this
A file will start with "BL" at the beggining so obviously load it in the "BL" section in odin
The one starts with "AP" will be putten in the AP section. Etc.
Warning!
The "AP" might take some time to load. It might say it's not responding but just wait for it. You are loading 2GB firmware.
After loading all the files simply click start. That's all! Wait for it and it will reboot . I hope this be helpful for you.
TROUBLESHOOTING SOME ISSUES!!!
If you connected your phone in download mode to PC but you didn't see yellow colour that means you have to install "Samsung galaxy USB drivers" from online.
After flashing... (Clicking start) if it finished and the ROM said Invaild... You have to get another firmware from another site (use a YouTube video I
recommend)
if the Odin stuck on "setup connection" for more than one minute that means you have to click "reset" then close Odin and restart your mobile to download mode again and start everything again.
TIPS!!
In "Odin" if you filled all the required files in thier right section there might be a section without a file in it. Just skip it
Consider installing twrp recovery for easier ROM flashing (without a PC!)
Android 11 ARM64 LINEAGE OS 18.1 is unofficially out for our galaxy A10. It can be flashed using the twrp recovery. The twrp can be flashed uising Odin.
Thanks all i will try it and let you know the outcome of the same.