Related
Help Please?
I had my Galaxy Pocket rooted and got the Jellyblast v3 rom, it was doin fine until I checked on the app OTA and check for update, a new update appeared which is the Nemesis 2.5 Hybrid-Holo Editon. It asked me to download it and so I did. When it was done, it asked me if I wanted to install it and so I did, and rebooted. Later I noticed that it was already boot looping. I tried pulling the battery off and to clockwork mode, with the proper procedure..the holds and presses, but still it just kept boot looping. Tried to connect it to the PC using the USB chord and yet it just shows the charging icon and sooner it turns to white. I tried Kies but still it turned white screen all over again; no device found.
Can someone PLEASE help me with this one? PLEASE, PLEASE guys? I know you guys are knowledgable on these kind of issues. :crying:
ShogunSam said:
Help Please?
I had my Galaxy Pocket rooted and got the Jellyblast v3 rom, it was doin fine until I checked on the app OTA and check for update, a new update appeared which is the Nemesis 2.5 Hybrid-Holo Editon. It asked me to download it and so I did. When it was done, it asked me if I wanted to install it and so I did, and rebooted. Later I noticed that it was already boot looping. I tried pulling the battery off and to clockwork mode, with the proper procedure..the holds and presses, but still it just kept boot looping. Tried to connect it to the PC using the USB chord and yet it just shows the charging icon and sooner it turns to white. I tried Kies but still it turned white screen all over again; no device found.
Can someone PLEASE help me with this one? PLEASE, PLEASE guys? I know you guys are knowledgable on these kind of issues. :crying:
Click to expand...
Click to collapse
I also received the same message and downloaded the update file. when ask to Reboot & Install i selected install the device booted in CWM and i selected update from .zip and selected the downloaded file in OTA Download Folder.
The update was successful, yet the ROM looks in BETA version.
Following are the issues i am currently facing in the updated ROM
1. Gallery ICS was Force Closed, later it was solved via uninstalling update.
2. Quick Panel, Nemesis Hub, Nemesis Owner Info & Nemesis Sound Boosters are giving FC messages.
3. OTA is giving INVALID ROM Message while updating.
I´m having the same issues.
After downloading and installing the OTA update, my device is keep stucking in the boot loop.
When I do to the recovery, I always get automatic update with the update.zip, which means I can't get into the full recovery to select another functional image.
Well I hope it's not bricked. Is there a sollution?
Thanks
I have repaired that throught ODIN MODE, like described here:
http://forum.xda-developers.com/showthread.php?t=1921421&highlight=s5300
ShogunSam said:
Help Please?
I had my Galaxy Pocket rooted and got the Jellyblast v3 rom, it was doin fine until I checked on the app OTA and check for update, a new update appeared which is the Nemesis 2.5 Hybrid-Holo Editon. It asked me to download it and so I did. When it was done, it asked me if I wanted to install it and so I did, and rebooted. Later I noticed that it was already boot looping. I tried pulling the battery off and to clockwork mode, with the proper procedure..the holds and presses, but still it just kept boot looping. Tried to connect it to the PC using the USB chord and yet it just shows the charging icon and sooner it turns to white. I tried Kies but still it turned white screen all over again; no device found.
Can someone PLEASE help me with this one? PLEASE, PLEASE guys? I know you guys are knowledgable on these kind of issues. :crying:
Click to expand...
Click to collapse
I have the exact problem. I just can not do anything.No connection to PC I dont know what to d.o Did you solve the problem ShougunSam?
I get the exact same error, and its annoying because I cant use my phone! If anyone can help us.. thanks
Rawhabbero said:
I get the exact same error, and its annoying because I cant use my phone! If anyone can help us.. thanks
Click to expand...
Click to collapse
For all the SGY Users who are facing issues after updating Jellyblast 3.5 to Nemesis (I faced it too) here is the guide to recover your phone:-
First to repair your phone you have to flash stock rom via odin .
Here's the guide for Flashing Stock Rom via Odin
Requirement: 1. A Samsung Galaxy y phone model gt-s5360.
2. A computer running on windows xp, vista, win7 or win8 with proper USB driver installed to connect your phone to computer {If you have not installed USB Driver for Samsung Galaxy Y then to Install USB Driver}
3. Stock Rom file : you can download stock rom according to your choice and region from the xda thread http://forum.xda-developers.com/showthread.php?t=1465800e
4. download ODIN: 1 .85.(google it as i cannot post outside links)
Installation Instruction : [ Charge your phone battery min 80%]
1. Download the required file Odin AND Stock Rom. zip and place in a folder on your desktop .
2. Now extract both with any file extractor.-- Odin v1 .85 .zip and the stock rom zip( file which contains the stock rom i. e 2 .3 .6 )
After that extract Stock Rom file after unzipping you will get three files :
PDA _S5360 _DDLK2.tar,
MODEM_ S5360 _DDLK2.tar &
CSC_S 5360 _DDLK2 .tar
3. Now turn off your Galaxy Y {Remove the battery for 5 -10 seconds and insert it back }
4. Go to Download Mode by Pressing Volume down + Home + Power for 5- 10 sec to boot in Download Mode
5. Now you entered in Download mode select continue by pressing Volume up button .
6. Now attach/ connect your phone to computer via USB cable .
7. Now on your computer open Odin v 1 .85. exe
8.Now make sure you are getting yellow box in ID:COM ( this means that your device is now connected and detected by odin )
9.Now Select those 3 files u download before
PIT - "totoro_0623.pit"
BOOTLOADER - "BOOT" file.
PDA - "PDA" file.
PHONE - "MODEM" file.
CSC - "GT-s5360- MULTI-CSC" file.
10.Now clik on start .
And let be ODIN do its work and wait till you see PASS in green colour it mean the flashing process is complete successfully . Samsung
11.Remove your phone from pc 12.Galaxy Y will auto reboot .
Now if you want to install nemesis Rom, you have to install the nemesis Rom 2.0 (Nemesis Titanium) first and than you should update the Rom by downloading the update file via OTA and flashing the zip file through CWM.
I hope my suggestion will solve your problem.
Did you wipe data and wipe catch before installing ROM??
Did you try flashing original ROM with Odin or others??
---------- Post added at 07:53 PM ---------- Previous post was at 07:48 PM ----------
chaos titan said:
did you wipe data and wipe catch before installing rom??
did you try flashing original rom with odin or others??
Click to expand...
Click to collapse
plz reply
thanks
thepain20 said:
For all the SGY Users who are facing issues after updating Jellyblast 3.5 to Nemesis (I faced it too) here is the guide to recover your phone:-
First to repair your phone you have to flash stock rom via odin .
Here's the guide for Flashing Stock Rom via Odin
Requirement: 1. A Samsung Galaxy y phone model gt-s5360.
2. A computer running on windows xp, vista, win7 or win8 with proper USB driver installed to connect your phone to computer {If you have not installed USB Driver for Samsung Galaxy Y then to Install USB Driver}
3. Stock Rom file : you can download stock rom according to your choice and region from the xda thread http://forum.xda-developers.com/showthread.php?t=1465800e
4. download ODIN: 1 .85.(google it as i cannot post outside links)
Installation Instruction : [ Charge your phone battery min 80%]
1. Download the required file Odin AND Stock Rom. zip and place in a folder on your desktop .
2. Now extract both with any file extractor.-- Odin v1 .85 .zip and the stock rom zip( file which contains the stock rom i. e 2 .3 .6 )
After that extract Stock Rom file after unzipping you will get three files :
PDA _S5360 _DDLK2.tar,
MODEM_ S5360 _DDLK2.tar &
CSC_S 5360 _DDLK2 .tar
3. Now turn off your Galaxy Y {Remove the battery for 5 -10 seconds and insert it back }
4. Go to Download Mode by Pressing Volume down + Home + Power for 5- 10 sec to boot in Download Mode
5. Now you entered in Download mode select continue by pressing Volume up button .
6. Now attach/ connect your phone to computer via USB cable .
7. Now on your computer open Odin v 1 .85. exe
8.Now make sure you are getting yellow box in ID:COM ( this means that your device is now connected and detected by odin )
9.Now Select those 3 files u download before
PIT - "totoro_0623.pit"
BOOTLOADER - "BOOT" file.
PDA - "PDA" file.
PHONE - "MODEM" file.
CSC - "GT-s5360- MULTI-CSC" file.
10.Now clik on start .
And let be ODIN do its work and wait till you see PASS in green colour it mean the flashing process is complete successfully . Samsung
11.Remove your phone from pc 12.Galaxy Y will auto reboot .
Now if you want to install nemesis Rom, you have to install the nemesis Rom 2.0 (Nemesis Titanium) first and than you should update the Rom by downloading the update file via OTA and flashing the zip file through CWM.
I hope my suggestion will solve your problem.
Click to expand...
Click to collapse
IT STILL DOES NOT WORK! I flashed the device, and this is what i get every time! WHAT AM I DOING WRONG?
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
crystysor1 said:
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
Click to expand...
Click to collapse
Samsung USB Drivers
Odin3 v3.07
KU1.9_SM-G318H_4.4.4.tar (recovery+cache)
Root include standalone KingoUser 1.9 apk.
Work on Android 4.4.4
Build: G318HXCU0AOE5
Kernel: 3.10.17-589709
Serial: KTU84P.G318HXCU0AOE8
hello,
can you post the steps in order to root the SM-G318H ?
thanks !
Hi, Where is the file?
I don't found...
Well so let's go for a step by step.
WARNING: Warranty will be definitly remove after rooting your phone !
You need an USB data cable, generally provided with phone pack.
1 - Download Samsung USB Drivers and install it.
It can be found on official Samsung Developers website [Not enough right to post links].
2 - Download Odin3 v3.07, can be found everywhere !
3 - Download KU1.9_SM-G318H_4.4.4.tar [Not enough right to post links].
4 - Connect the phone and power it up in Odin mode by pressing Volume down + home + Power.
5 - Start Odin3 exe and load the tar file into PDA, only Auto Reboot will be checked in Option section.
6 - When Odin has find the ID:COM press Start.
Phone automatically reboot in KingoRoot recovery mode to install root service and KingoUser 1.9 apk, it's take about 30 sec and then auto reboot in normal way.
Done with no datas loss (backup them before in case of), you can upgrade KingoUser 1.9 to the latest 2.0.2.
Be aware that the phone still has Kingo recovery image and you can't have a recovery mode [Volume up + home + power] for update.zip, clear/wipe data, etc...
To grant this, put back original recovery PDA file image with Odin (step 4 to 6).
It can be extract from official firmware (recovery.img) and repack into tar/tar.md5 file for PDA.
Feedbacks and thanks are welcome.
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
crystysor1 said:
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
Click to expand...
Click to collapse
hi i would like very much you could give me the KU1.9_SM-G318H_4.4.4.tar
because i seem unable to find it... =(
plz help the world!!!!! =)
thank you very much Mr. Madgik nop90
:good:
AutoROOT Galaxy Trend 2 Lite SM-G318H
After work self made can be found here
AutoROOT: KU1.9_SM-G318H_4.4.4.tar
MD5: 360F5D6703412A5E9D8F77CC4EA6AD35
Size: 22.5 Mo - 23 633 920 octets
ge.tt/89u6oOO2
See you soon . . .
thank's
crystysor1 said:
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
Click to expand...
Click to collapse
I rooted my Trend 2 lite SM-G318H with Kingo root for Windows.
It took a long time, but succeeded fine.
Cheers.
Madgik nop90 said:
After work self made can be found here
AutoROOT: KU1.9_SM-G318H_4.4.4.tar
MD5: 360F5D6703412A5E9D8F77CC4EA6AD35
Size: 22.5 Mo - 23 633 920 octets
ge.tt/89u6oOO2
See you soon . . .
Click to expand...
Click to collapse
hi, do you think it will work for my Galaxy Ace 4 Neo G318H?
someone managed to do the root ? Samsung G318H trend lite 2?
the metode was described in post nr5 working on my sm g318h phone thank you
KU1.9_SM-G318H_4.4.4.tar
can someone send me this file ????? please so much
Don't really see the point as there are no roms out for this phone to install or am I missing something, can certain roms cooked for other Galaxy devices be installed?
I have a question
Madgik nop90 said:
Well so let's go for a step by step.
WARNING: Warranty will be definitly remove after rooting your phone !
You need an USB data cable, generally provided with phone pack.
1 - Download Samsung USB Drivers and install it.
It can be found on official Samsung Developers website [Not enough right to post links].
2 - Download Odin3 v3.07, can be found everywhere !
3 - Download KU1.9_SM-G318H_4.4.4.tar [Not enough right to post links].
4 - Connect the phone and power it up in Odin mode by pressing Volume down + home + Power.
5 - Start Odin3 exe and load the tar file into PDA, only Auto Reboot will be checked in Option section.
6 - When Odin has find the ID:COM press Start.
Phone automatically reboot in KingoRoot recovery mode to install root service and KingoUser 1.9 apk, it's take about 30 sec and then auto reboot in normal way.
Done with no datas loss (backup them before in case of), you can upgrade KingoUser 1.9 to the latest 2.0.2.
Be aware that the phone still has Kingo recovery image and you can't have a recovery mode [Volume up + home + power] for update.zip, clear/wipe data, etc...
To grant this, put back original recovery PDA file image with Odin (step 4 to 6).
It can be extract from official firmware (recovery.img) and repack into tar/tar.md5 file for PDA.
Feedbacks and thanks are welcome.
Click to expand...
Click to collapse
You said: "Be aware that the phone still has Kingo recovery image and you can't have a recovery mode [Volume up + home + power] for update.zip, clear/wipe data, etc...
To grant this, put back original recovery PDA file image with Odin (step 4 to 6).
It can be extract from official firmware (recovery.img) and repack into tar/tar.md5 file for PDA."
After doing the root, can I update my phone??????
If the answer of this question is no, can you post a link to another file that doesn't do that?
Can any one please help me root my samsung galaxy trend neo SM-G318H
BASEBAND VERSION SM-G318HXCU0AOG2
Root Samsung Galaxy Trend 2 lite - SM-G318H android version 4.4.4
ROOT for all Samsung SM-G318H android version 4.4.4 Phones.
WARNING: Warranty will definitely be void after rooting your phone !
You need an USB data cable, generally provided with phone pack.
Requirements before rooting process.
A - Enable usb debugging mode on your phone.
B - Check if trust from Unknown Sources is enabled on your phone.
C - Download Samsung USB Driver for Mobile Phones and install it.
D -When connecting your phone your PC must give some notification that you connected your phone.
Rooting
1 - Download Odin3 v3.10.6 latest version.
2 - Locate and Download SM-G318H_4.4.4cokbasit.org.tar (i can't submit a direct download link as Junior Member)
3 - Start (Run as Administrator) Odin3 v3.10.6.exe and click on the --> CP <-- button to select and load the downloaded tar file into Odin. Make No Mistake you must see the path of the downloaded tar file after the checked CP checkbox.
(Using an older version of Odin click on the --> PHONE <--button to select and load the downloaded tar file into Odin. Make a No Mistake you must see the path of the downloaded tar file after the checked PHONE checkbox)
4 -Boot your disconnected SM-G318H phone into Download Mode by pressing Volume down + home + Power together (long press until the boot screen appear). A warning message will flash, now press Volume Up key to proceed to Download Mode. Now connect your SM-G318H phone, in Odin you should see a highlighted COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. That means Odin has successfully detected your SM-G318H phone at a ID:COM Port if not the Case keep on trying, Or find a better tutorial about Odin flashing. Now quick proceed to installation Press Start.
5 - Once completed, you would see “PASS!” message in ID:COM.
6 - Your SM-G318H Phone should automatically reboot after completion And You have ROOT
Including SuperUser ase Root Access Manager for your SM-G318H phone.
download==> 4.4.4cokbasit.org.tar
mediafire.com/download/moj58dj0rkw0jif/SM-G318H_4.4.4cokbasit.org.tar
Tweak your Rooted SM-G318H to absolute top performance. I recommend the Ultimate Utility PowerToolbox a MustHave for android PowerUsers the All-In-One Toolbox containing a lot Powerful system utilities (google playstore). Warning don't apply risky changes that can seriously mash up (brick) your phone or resulting in a unstable frequently crashing system. Some changes can't be rolled back. So only apply risky changes with outstanding knowledge of the android system. Otherwise you have flash the (original) Stock firmware including the root tar for SM-G318H again and reinstall all your apps.
All-In-One Toolbox APK==> imoblife.toolbox.full-5.2.9.1.apk
Feedbacks and thanks are welcome
Mine is not either of those. It's Galaxy Trend Neo! Will this steps work? How do i go about rooting it if the steps provided wont help? ?
skullhack said:
Mine is not either of those. It's Galaxy Trend Neo! Will this steps work? How do i go about rooting it if the steps provided wont help?
Click to expand...
Click to collapse
Yes ROOT for every SM-G318H device! Unfortunately i still can't submit a direct download link for the SM-G318H_4.4.4cokbasit.org.tar File Essential for ROOT on SM-G318H devices. Follow the steps and you will have ROOT on your SM-G318H phone.
mediafire.com/download/moj58dj0rkw0jif/SM-G318H_4.4.4cokbasit.org.tar
Download from there.
Feedbacks and thanks are Welcome
Let me get the package. Will get back to you.
Look if around the internet and only found a SM-J100H root which bricked my device so I had to re flash it, could you please help me find a root for my device please? I know my phone is uncommon especially for the US. I know there is a possible way to root any android device.
Same problem here...
G'day,
I was just looking through for a new ROM for my girlfriends phone (j100y) and saw this.
I rooted her phone with kingo root after flashing the file listed below, just search it - I cant post links.
'J100YDXU0AOC1_root.tar' image by Hosam Kashto
Hope this helps.:good::good:
notese7en said:
G'day,
I was just looking through for a new ROM for my girlfriends phone (j100y) and saw this.
I rooted her phone with kingo root after flashing the file listed below, just search it - I cant post links.
'J100YDXU0AOC1_root.tar' image by Hosam Kashto
Hope this helps.:good::good:
Click to expand...
Click to collapse
Do you happen to have the password for this? I found the RAR file but it's password protected
BioGhosty said:
Do you happen to have the password for this? I found the RAR file but it's password protected
Click to expand...
Click to collapse
Seen it, I think it's fake to force people to pay some money.
creepercast888 said:
Look if around the internet and only found a SM-J100H root which bricked my device so I had to re flash it, could you please help me find a root for my device please? I know my phone is uncommon especially for the US. I know there is a possible way to root any android device.
Click to expand...
Click to collapse
This might help you
Translation, mostly by Google:
Quote:
Originally Posted by dodynoe
How To Root Samsung Galaxy J1 (SM-J100H)
www dodynoe.com/2015/04/how-to-root-samsung-galaxy-j100h
Complete Step By Step Tutorial to Root Samsung Galaxy J1:
This tutorial is only managed using a PC
Step 1:
Download MD5 file through www mediafire.com/downl.../r99xeoywhdryenc/boot.tar.md5
Step 2:
Download and install the USB Driver. www mediafire.com/.../a4hd8y0c1iakysk/Samsung-Usb-Driv...
Step 3:
Download ODIN v3.10 and directly extract it. www mediafire.com/.../v26m0vfo1rb9xi6/Odin3_v3.10.6.zip
Step 4:
Phone: enter download mode first >>. After being turned off, HOLD all three buttons (Power button + Volume Down button + Home Button). After turned on, immediately release (Power button) but still HOLD Volume Down Button + Home button. After that select Continue using Volume button UP. now your phone is already in the download mode.
Step 5:
Plug the phone to a PC via USB cable
Step 6:
Open the Odin v3.10 application that is already downloaded. Click the PA button and select the MD5 file that is already downloaded. Then Click (START) button. Wait until completed and the phone will automatically reboot
Step 7:
Download application iROOt and install in PC. See www mgyun.com/en/getvroot
Step 8:
Open the iRoot application that is already installed earlier and run the root process
Sm-j100y /= sm-j100h
I have encountered a similar incompatibility trying to use the SM-J100H TWRP recovery onto a SM-J100Y handset. Trying to boot into recovery after doing this freezes it, and I have to power it off to get out of it.
It looks like some further development is needed to create a compatible Rom/TWRP image that wont brick the SM-J100Y.
donnsuil said:
I have encountered a similar incompatibility trying to use the SM-J100H TWRP recovery onto a SM-J100Y handset. Trying to boot into recovery after doing this freezes it, and I have to power it off to get out of it.
It looks like some further development is needed to create a compatible Rom/TWRP image that wont brick the SM-J100Y.
Click to expand...
Click to collapse
Comparing the 2 models on here (I can't post links...) mobosdata.com/samsung-galaxy-j1-sm-j100y and mobosdata.com/samsung-galaxy-j1-sm-j100h, the hardware differences are:
RAM: J100y-768MB ; J100H-512MB
SIM: J100y=Single SIM ; J100H=Dual SIM
Network: J100y=3G 850, 900, 2100 MHz, as well as 4G 700, 900, 1800, 2100, 2600 MHz ; J100H=3G 900, 2100 MHz
NFC: J100Y=yes ; J100H=No
Hotspot: J100Y=yes ; J100H=No
AudioRecording: J100Y=yes ; J100H=No
I just wanted to install TWRP. Does anyone know if you need to unlock the bootloader for that using Odin? I would not have thought so, but I could be wrong.
Rooting SM-J100Y
'J100YDXU0AOC1_root.tar' image by Hosam Kashto (Password "hosamkashto") does indeed work for rooting my SM-J100Y but i fail to connect to my network Skinny, if there is a way to edit the image and make a boot img for the updated firmware version i'll be willing to give it a shot. And how hard is it to create a TWRP/CWM rom for this device?
root access successful
I have successfully rooted my samsung J100Y with no issues what so ever, J100YDXU0AOC1.
You need to install kingoroot on your phone first then install kingoroot on your PC, Also install ODIN V3.07 on your PC to get this done properly, when I get home I will upload the files to my dropbox and give better details how to do this correctly.
How To Root Samsung Galaxy J1
This is how you root the Samsung Galaxy J1 (J100YDXU0AOC1) Australia.
- Install Kingoroot on your phone
- Install both Kingoroot and Odin V3.07 on your PC (in the files provided below)
- Put your phone into download mode, power off the phone then hold down power, home and volume down until you see the little android robot
- Open Odin V3.07 and plug your phone in
- Click on PDA in Odin V3.07 and navigate to the file J100YDXU0AOC1_root.tar and press Start (let it work its magic)
- When it says Pass in Odin you are good to go, now open Kingoroot on your PC and run it, it will make sure it is properly rooted, your phone will tell you it is rooted before the PC version does, that's it you have now successfully rooted your phone.
I have included the original firmware in the files just in case something goes wrong for you, you can use Odin to restore with the original firmware.
All the files can be found here: https :// www .dropbox.com/sh/pl2u02ev8abnc7u/AACULRGuaCvwhLveMvnnv86Fa?dl=0
PS: close the gaps in the link to get the files.
blitzya351 said:
This is how you root the Samsung Galaxy J1 (J100YDXU0AOC1) Australia.
- Install Kingoroot on your phone
- Install both Kingoroot and Odin V3.07 on your PC (in the files provided below)
- Put your phone into download mode, power off the phone then hold down power, home and volume down until you see the little android robot
- Open Odin V3.07 and plug your phone in
- Click on PDA in Odin V3.07 and navigate to the file J100YDXU0AOC1_root.tar and press Start (let it work its magic)
- When it says Pass in Odin you are good to go, now open Kingoroot on your PC and run it, it will make sure it is properly rooted, your phone will tell you it is rooted before the PC version does, that's it you have now successfully rooted your phone.
I have included the original firmware in the files just in case something goes wrong for you, you can use Odin to restore with the original firmware.
All the files can be found here: https :// www .dropbox.com/sh/pl2u02ev8abnc7u/AACULRGuaCvwhLveMvnnv86Fa?dl=0
PS: close the gaps in the link to get the files.
Click to expand...
Click to collapse
Wow! It did work, indeed! Where did you get that boot.img??
This really helped, thanks!
But now I just need a custom recovery......
(and a custom rom)
same here
image by Hosam Kashto
Tyrawr.117 said:
'J100YDXU0AOC1_root.tar' image by Hosam Kashto (Password "hosamkashto") does indeed work for rooting my SM-J100Y but i fail to connect to my network Skinny, if there is a way to edit the image and make a boot img for the updated firmware version i'll be willing to give it a shot. And how hard is it to create a TWRP/CWM rom for this device?
Click to expand...
Click to collapse
Hello Tyrawr - I want to Root my Samsung J100 Y by this method
How do you get the image by Hosam Kashto ? Could you please sen me the link ro Download
Best Thanks Georges - Toulouse - France
Hello Blitzya
I would like to Root my Samsung J100Y but I Dont know how to get the Root File by Hosam Kashto
I tried to go to your Shared File in Dropbox but The File is no longer threre - -- Too Bad ! - -
Could you Please Help me ? Best Thanks - Georges - Toulouse - France
blitzya351 said:
This is how you root the Samsung Galaxy J1 (J100YDXU0AOC1) Australia.
- Install Kingoroot on your phone
- Install both Kingoroot and Odin V3.07 on your PC (in the files provided below)
- Put your phone into download mode, power off the phone then hold down power, home and volume down until you see the little android robot
- Open Odin V3.07 and plug your phone in
- Click on PDA in Odin V3.07 and navigate to the file J100YDXU0AOC1_root.tar and press Start (let it work its magic)
- When it says Pass in Odin you are good to go, now open Kingoroot on your PC and run it, it will make sure it is properly rooted, your phone will tell you it is rooted before the PC version does, that's it you have now successfully rooted your phone.
I have included the original firmware in the files just in case something goes wrong for you, you can use Odin to restore with the original firmware.
All the files can be found here: https :// www .dropbox.com/sh/pl2u02ev8abnc7u/AACULRGuaCvwhLveMvnnv86Fa?dl=0
PS: close the gaps in the link to get the files.
Click to expand...
Click to collapse
i got root j100y. took 2 days but got it. Flash J100YDXU0AOC1_OPPOAOC1_V4.4.4_Repair_Firmware.zip. Unzip and find necessary files. Used odin3 13.3.1 latest version, insert files BL, AP and so from the zip. If its taking too long more than 20 mins, power off phone and back on but dont unplug from pc. Should start where it left off. Now, set up phone when it reboots, settings, about phone, tap build number 5 times, enter developer mode, enable usb debug, allow installations from unknown sources. Down apk kingoboot, install on phone. one click root. Device should reboot. Now check root with an app. Should be done if not run kingoroot on pc. Keep trying and follow any prompts on phone always allow and install anyway etc. It is possible.
FLASHING STOCK JELLYBEANHey guys, i have seen that a lot of people want to downgrade to jellybean 4.3 and facing a "fail" in Odin. so i'm creating this thread to overcome that problem.
Most importantly, clear the data of your phone before you flash the stock JellyBean. Otherwise you will face a bootloop.
Step-1: Download the following required files.
(All links are from my AndroidFileHost account so you dont have to login for any kind of websites)
Samsung USB drivers(for G7102 only): https://www.androidfilehost.com/?fid=24459283995316252
Odin: https://www.androidfilehost.com/?fid=24459283995316253
JellyBean firmware: https://www.androidfilehost.com/?fid=24459283995316591
Step-2: The actual flashing.
>Extract SAMSUNG_USB_DRIVERS_FOR_MOBILE_PHONES.ZIP AND INSTALL THE DRIVERS.
>Extract the Firmware file.
>Extract Odin ZIP file.
>Open Odin v3.10.7 folder and run Odin3 v3.10.7.exe.
>Reboot Phone in Download Mode by pressing and hold Home + Power + Volume Down buttons.
>Connect phone and wait until you get a blue sign in Odin.
Note: If you didnt get the blue sign, you did not install samsung drivers properly.
>Add the firmware file to AP / PDA.
>Make sure re-partition is NOT ticked.
>Go to options tab and select nand erase all (this is very important).
>Click the start button, sit back and wait few minutes.
Voila. You successfully flashed stock JellyBean on your samsung galaxy grand 2 (SM-G7102)
This worked on my device. and my friend's devices. i have tried in 2-3 devices. If u still fail to flash and brick your device im not responsible.
Firmware link updated.. if any1 tries, do respond here...
downgrading stable http://4pda.ru/forum/index.php?s=&showtopic=595850&view=findpost&p=35653052
i heard this method from someone...but the difference was that he told me to check the 'bootloader update' option also..is it ok?
OP Junior Member1 posts Thanks: 0
Please help me rooting my phone i cant root my phone using one click root for examples : towelroot,kingroot,etc... but i cant root using them please helpp my device spesifications are :
Device name : Samsung Galaxy S5
Model number :Sm-G900I
Android version :6.0.1
Android security patch level : febuary 1, 2017
Baseband version :G900IDVU1CQB1
Kernel version :3.4.0-9465984 [email protected] #1 thus feb 16 14:15:40 KST 2017
Build number : MMB29M.G900IDVU1CQB1
SE for android status : enforcing
KNOXS version :KNOX 2.6
If u need more details just notice me ill post everythi nd
Download cf auto root for ur device and flash install via odin
Sent from my SM-G900FD using Tapatalk
yazeed_twb said:
Download cf auto root for ur device and flash install via odin
Sent from my SM-G900FD using Tapatalk
Click to expand...
Click to collapse
Okay thanks but i need a computer right cant without ? Bcos i tried apps like kingroot,towelroot and etcs it wont work can u explain me why its not working ?
falken758 said:
Okay thanks but i need a computer right cant without ? Bcos i tried apps like kingroot,towelroot and etcs it wont work can u explain me why its not working ?
Click to expand...
Click to collapse
One click root apps no longer works.
The reason is Android is getting into more and more security stuffs, locking things up, you can't just exploit it with an app.
sachin n said:
One click root apps no longer works.
The reason is Android is getting into more and more security stuffs, locking things up, you can't just exploit it with an app.
Click to expand...
Click to collapse
Im really thankfull and sorry its good thing dat i joined XDA to get help thnaksss but can u sxplain how do i root with cf auto root using odin and am i ok to download or should i need to download right firmware other stuffs ?
falken758 said:
Im really thankfull and sorry its good thing dat i joined XDA to get help thnaksss but can u sxplain how do i root with cf auto root using odin and am i ok to download or should i need to download right firmware other stuffs ?
Click to expand...
Click to collapse
Oops!
Actually, I never ever had a Samsung device, so I dunno how those things go. :/
I really don't know about CF auto root etc...
Hope @yazeed_twb will help you in this!
yazeed_twb said:
Download cf auto root for ur device and flash install via odin
Sent from my SM-G900FD using Tapatalk
Click to expand...
Click to collapse
Im really thankfull and sorry its good thing dat i joined XDA to get help thnaksss but can u sxplain how do i root with cf auto root using odin and am i ok to download or should i need to download right firmware other stuffs ?
falken758 said:
Im really thankfull and sorry its good thing dat i joined XDA to get help thnaksss but can u sxplain how do i root with cf auto root using odin and am i ok to download or should i need to download right firmware other stuffs ?
Click to expand...
Click to collapse
If you Google '' how to root samsung s5 knox variant xda''
You'll likely get into some xda tuts about rooting s5 knox variant -
*Example - thread link
falken758 said:
Im really thankfull and sorry its good thing dat i joined XDA to get help thnaksss but can u sxplain how do i root with cf auto root using odin and am i ok to download or should i need to download right firmware other stuffs ?
Click to expand...
Click to collapse
I AM NOT RESPONSABLE IF YOU DAMEGED YOU PHONE
Click to expand...
Click to collapse
If you have the locked bootloader variant, then you will need to unlock bootloader before you follow this method(I've never owned a locked variant so I donot know how to unlock.
First :download samsung drivers on Ur pc.
2nd: go to cf auto root website, search for Ur phone's variant and download the file
3rd:you will get a zip file contains odin program and the root file.
4th,: go to developer options in Ur phone's settings (if there are no dev options then go to settings/about phone and tap the build number about 10 times) open developer options and enable usb debugging (enable OEM unlock if it applicable), turn off Ur phone and boot to the downloading mode by pressing the power home and volume up keys, after that connect your phone to Ur pc,open odin and load the .tar root file which did you extract from the zip file and press PASS, wait and KEEP YOUR PHONE CONNECTED until it reboot to installing screen with a red font, after the installation finish, reboot Ur phone and enjoy.
-----------
Another method: (my favorite method )
Download samsung USB drivers
Download odin app
Go to twrp.me, search for ur phone and download recovery.tar
go to developer options in Ur phone's settings (if there are no dev options then go to settings/about phone and tap the build number about 10 times) open developer options and enable usb debugging
(enable OEM unlock if it applicable), turn off Ur phone and boot to the downloading mode by pressing the power home and volume up keys, after that connect your phone to Ur pc.
Open odin and press on AP and load recovery file
After flash recovery, reboot Ur phone and install your favorite root ex:magisk or supersu and flash it via twrp recovery.
I wish that this help you
---------- Post added at 11:10 AM ---------- Previous post was at 11:08 AM ----------
falken758 said:
Okay thanks but i need a computer right cant without ? Bcos i tried apps like kingroot,towelroot and etcs it wont work can u explain me why its not working ?
Click to expand...
Click to collapse
I don't know why but personally I prefer to root with the methods I mentioned above
yazeed_twb said:
If you have a the locked bootloader variant, then you will need to unlock bootloader before you follow this method(I've never owned a locked variant so I donot know how to unlock.
First :download samsung drivers on Ur pc.
2nd: go to cf auto root website, search for Ur phone's variant and download the file
3rd:you will get a zip file contains odin program and the root file.
4th,: go to developer options in Ur phone's settings (if there are no dev options then go to settings/about phone and tap the build number about 10 times) open developer options and enable usb debugging (enable OEM unlock if it applicable), turn off Ur phone and boot to the downloading mode by pressing the power home and volume up keys, after that connect your phone to Ur pc,open odin and load the .tar root file which did you extract from the zip file and press PASS, wait and KEEP YOUR PHONE CONNECTED until it reboot to installing screen with a red font, after the installation finish, reboot Ur phone and enjoy.
-----------
Another method: (my favorite method )
Download samsung USB drivers
Download odin app
Go to twrp.me, search for ur phone and download recovery.tar
go to developer options in Ur phone's settings (if there are no dev options then go to settings/about phone and tap the build number about 10 times) open developer options and enable usb debugging
(enable OEM unlock if it applicable), turn off Ur phone and boot to the downloading mode by pressing the power home and volume up keys, after that connect your phone to Ur pc.
Open odin and press on AP and load recovery file
After flash recovery, reboot Ur phone and install your favorite root ex:magisk or supersu and flash it via twrp recovery.
I wish that this help you
---------- Post added at 11:10 AM ---------- Previous post was at 11:08 AM ----------
I don't know why but personally I prefer to root with the methods I mentioned above
Click to expand...
Click to collapse
I think the second one is nice since we can pick software for controlling root permissions and also i think its not complicated as the first one i might try to go with ur fav method btw thanks for the help ur the best
yazeed_twb said:
If you have a the locked bootloader variant, then you will need to unlock bootloader before you follow this method(I've never owned a locked variant so I donot know how to unlock.
First :download samsung drivers on Ur pc.
2nd: go to cf auto root website, search for Ur phone's variant and download the file
3rd:you will get a zip file contains odin program and the root file.
4th,: go to developer options in Ur phone's settings (if there are no dev options then go to settings/about phone and tap the build number about 10 times) open developer options and enable usb debugging (enable OEM unlock if it applicable), turn off Ur phone and boot to the downloading mode by pressing the power home and volume up keys, after that connect your phone to Ur pc,open odin and load the .tar root file which did you extract from the zip file and press PASS, wait and KEEP YOUR PHONE CONNECTED until it reboot to installing screen with a red font, after the installation finish, reboot Ur phone and enjoy.
-----------
Another method: (my favorite method )
Download samsung USB drivers
Download odin app
Go to twrp.me, search for ur phone and download recovery.tar
go to developer options in Ur phone's settings (if there are no dev options then go to settings/about phone and tap the build number about 10 times) open developer options and enable usb debugging
(enable OEM unlock if it applicable), turn off Ur phone and boot to the downloading mode by pressing the power home and volume up keys, after that connect your phone to Ur pc.
Open odin and press on AP and load recovery file
After flash recovery, reboot Ur phone and install your favorite root ex:magisk or supersu and flash it via twrp recovery.
I wish that this help you
---------- Post added at 11:10 AM ---------- Previous post was at 11:08 AM ----------
I don't know why but personally I prefer to root with the methods I mentioned above
Click to expand...
Click to collapse
so ummm btw which one should i use for the root from twrp.me since when i found my device i found 3 file dat is
md5 for twrp-3.1.0-0-klte.img.tar
Download twrp-3.1.0-0-klte.img.tar
Download PGP Signature twrp-3.1.0-0-klte.img.tar.asc
which one
falken758 said:
so ummm btw which one should i use for the root from twrp.me since when i found my device i found 3 file dat is
md5 for twrp-3.1.0-0-klte.img.tar
Download twrp-3.1.0-0-klte.img.tar
Download PGP Signature twrp-3.1.0-0-klte.img.tar.asc
which one
Click to expand...
Click to collapse
Download twrp-3.1.0-0-klte.img.tar
Sent from my SM-N930FD using Tapatalk
Hi,
I have similar phone but different Build Number
MMB29M.G900IDVU1CQD1
I was wanting to root my phone to undelete deleted sms, does the contact on the phone still have to be valid in the message box to allow this to work?
It was to a friend's understanding this is impossible and requires Phone provider to do this?