[ROM][6.0.1][PRE-ALPHA] Unofficial Cyanogenmod 13.0 for Huawei Honor 4X/4C (Kirin) - Honor 4C ROMs, Kernels, Recoveries, & Other Develo

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0.1 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
All the source code for CyanogenMod is available in the CyanogenMod Github Repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review.
Please see the next posts for downloads, bug list and instructions.
XDA:DevDB Information
[ROM][6.0.1][PRE-ALPHA] Unofficial Cyanogenmod 13.0 for Huawei Honor 4X/4C (Kirin), ROM for the Honor 4C
Contributors
hackslash
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: No Longer Updated
Created 2016-09-12
Last Updated 2016-11-19

Contributions and Bug List
Contributors:
First of all thanks to the P8 Lite Dev Team, @XePeleato @olrak and @haky 86 for helping me out throughout (and especially @XePeleato for offering extra support despite his busy schedule)
To @lloco73 and @xperiafan13 for their work on the kernel sources.
@gabry3795 for fixing the RIL on Mate 7.
And you for testing this ROM, sending me logcats and saying thanks (it's ok if you didn't, still I thank you)
What's not Working:
WiFi
Bluetooth
Audio
Sensors
SD Card
GPS
and many other things I haven't tested yet.
What's Working:
Android as System
Graphics Binaries (except hwcomposer)
Notification Light
MTP
Brightness Slider
RIL
Dual SIM (with 4G LTE) and Mobile Data
Sensors
USB OTG

Downloads and Instructions
Build: Pre-Alpha-2
Build Date: 15th August 2016
System Image download link: https://mega.nz/#!5Ag2TLjB!_dqfki1PWOU2NS-7bf240gyRwhilPikseCH2ZalvOsc
Boot Image download link: https://mega.nz/#!QRQTERgJ!ZZjoDxRDeKqxqQpJ1TGzigi7tjTk5Ec5imFBTkCccBA
Use Fastboot to flash the above images. Please make a complete data, dalvik and cache wipe using TWRP.
It works with the Chinese versions also (however I don't know for how long since the CN variants have less allocated size for /system partition 1.5 GB whereas I am targeting the 2.5 GB variants).

Screenshots:
http://imgur.com/a/P93Hy

Source Code:
I alone might not be able to fix every little bug but with your help that could be possible. If you have any knowledge about building ROMs, please look at the repositories below and help us build the perfect ROM for our device.
Device Tree: https://github.com/HuaweiHonor4C/android_device_huawei_cherryk
Vendor Libraries: https://github.com/HuaweiHonor4C/android_vendor_huawei_cherry
Kernel: https://github.com/HuaweiHonor4C/kernel_hi6210sft_mm

WOW
excellent, and I want to start to work and bring great things to this device ...

That's great!I don't have any knowledges about developing,but maybe i can test your work on Chinese version Honor 4C CHM-TL00H.
Sorry for my bad English.
Android小楼阁-QQ群 439637151
来自搭载Android 2.3 GingerBread的华为Y220-T10

Sorry cor the dead links in first post. They'll be live on 4th May. (My monthly server quota limit is reached and I have to wait for it to reset).
Also a update, I have been able to get CM to boot but still the boot doesn't finished due to issues with CM's surface flinger. I have been trying to patch Mali userspace binaries and gralloc to make them compatible. Let's see if that works.

Does anybody here has experience with Java classes and programs. I have a small task for that person. I have managed to extract RIL class from our stock framework. However, I believe the class has to made compatible with AOSP. Any Java dev up to the challenge?

hackslash said:
Does anybody here has experience with Java classes and programs. I have a small task for that person. I have managed to extract RIL class from our stock framework. However, I believe the class has to made compatible with AOSP. Any Java dev up to the challenge?
Click to expand...
Click to collapse
hi dear.
what did you do?
it's A long time did not reveal the amount of progress.
which point of CM13 way you are?is it possible?

if you go here http://consumer.huawei.com/en/support/search/index.htm?keywords=Honor 4X (Che2-L03)), you can find the kernel open souce from honor 4x/4c, this would work for anything? i never knew this existed before lol
EDIT: i guess you found it anyways, since the gpu drivers are incompatible (i guess?), just a question, this only apllies to cm or to any custom rom?

Any prog?

Sir,HUAWEI P8Lite's CM13 has arrived!https://tapatalk.com/shareLink?url=...share_tid=3419852&share_fid=3793&share_type=t
来自华为荣耀畅玩4C CHM-TL00H -天生急性子 Android 小楼阁

here the cm13 of p8 lite http://forum.xda-developers.com/p8lite/development/rom-cyanogenmod-13-0-arrived-t3419852
if you didnt know, Honor 4X, Honor 4C, P8 Lite, G play and G Play mini phones shares the same specs internal, only some small differences between them, principally that p8 lite has more internal storage, the rest is the same, so when this cm13 is released maybe it will work? i know aosp system.img didnt flashed for some reason, but i guess if xepeleato make a flashable zip it could work
EDIT: and hak86 confirmed that any phone with hi6210sft board, it will work, so it depends if he releases .img or a flashable zip

panchovix said:
here the cm13 of p8 lite http://forum.xda-developers.com/p8lite/development/rom-cyanogenmod-13-0-arrived-t3419852
if you didnt know, Honor 4X, Honor 4C, P8 Lite, G play and G Play mini phones shares the same specs internal, only some small differences between them, principally that p8 lite has more internal storage, the rest is the same, so when this cm13 is released maybe it will work? i know aosp system.img didnt flashed for some reason, but i guess if xepeleato make a flashable zip it could work
EDIT: and hak86 confirmed that any phone with hi6210sft board, it will work, so it depends if he releases .img or a flashable zip
Click to expand...
Click to collapse
It will work flawlessly. The system.img didnt flashed because P8Lite has 16 GB internal with 3-4 GB reserved for system partition whereas Honor 4 has 8 GB internal with 2.5 GB reserved for system partition. Due to this difference in partition sizes the image didnt flashed.
I'll clone his repo and will try a build in one or two days. I was actually busy with my exams and entrance tests for the past three months so I wasn't able to work on this project.

@hackslash Thank you very much! im waiting to test it on My honor 4X, since i only tested that AOSP from russian forums, that had some bugs like signal, BT, etc,(static wifi if i remember right), and well, it flashed well

hackslash said:
It will work flawlessly. The system.img didnt flashed because P8Lite has 16 GB internal with 3-4 GB reserved for system partition whereas Honor 4 has 8 GB internal with 2.5 GB reserved for system partition. Due to this difference in partition sizes the image didnt flashed.
I'll clone his repo and will try a build in one or two days. I was actually busy with my exams and entrance tests for the past three months so I wasn't able to work on this project.
Click to expand...
Click to collapse
Thank you,but in China after September 15,2015,Honor 4C Plus also has 16GB ROM.
来自华为荣耀畅玩4C CHM-TL00H -天生急性子 Android 小楼阁

I already left a thank you but just wanted to leave a coment to praise your effort on doing this, so thank you again =D

I'm not a developer too...
But I'm using honor 4c.
I really appreciate your work no one has tried to build a custom rom for honor 4c.thank you for trying to do it.I hope you succeed

cyanogenmod roms are very fast and stable please make it for our device

Related

[DEV][ROM][4.4.4][UNOFFICIAL][GT-I8552] CyanogenMod 11.0

[DEV][ROM][4.4.4][UNOFFICIAL][GT-I8552] CyanogenMod 11.0
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.
Quote:
#include /* * Your warranty is now void. * *
I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed.
Please * do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* * Submitting bug reports on nightly builds is the leading * cause of male impotence. */
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review.
Do not submit bugs to gerrit about this rom.
This is development thread. DO NOT ASK FOR ETAs.
so guys k2wl has told me to make this thread
as you all know ppl here have been trying really hard to getcm11 to boot on this device but they have not been sucessful !
following instructions given by k2wl and by fixing errors here and there i was able to make a bootable cm11 for this device
it has been tested by me and freitaz
it boots but nothing works im serious coz at dis time the main priority was to make it boot n then fix all the bugs later!
so when i told k2wl abt dis he said that he'll help us so lets hope for the best and i am no developer it was jst a stroke of luck tht i was able to boot it i think
so im posting here the link of my build so tht other devs for this device can use it coz i dnt think im mch experienced
http://www.mediafire.com/download/q1...delos3geur.zip
my first build
here is the device repository link
https://github.com/mahirkukreja/android_device_samsung_delos3geur
INSTRUCTIONS
First time installing CyanogenMod 11.0 to your Galaxy win Duos i8552, or coming from another ROM:
- Make sure you are on Stock 4.1.2 ROM.
- Boot into recovery(CWM 6.0.4.5 recovery is must)
- Wipe data / factory reset
- Wipe Dalvik Cache
- Flash CM10.2 ROM
- Flash Gapps
- Reboot
Gapps
http://goo.im/gapps
CWM 6.0.4.5
http://forum.xda-developers.com/show....php?t=2570950
CREDITS
Cyanogenmod Team
Samsung for source
XDA:DevDB Information
[DEV][ROM][4.4.4][UNOFFICIAL][GT-I8552] CyanogenMod 11.0 , ROM for the Samsung Galaxy Grand Quattro
Contributors
mahir kukreja
Version Information
Status: Testing
Created 2014-07-02
Last Updated 2014-07-02
cool project continued
c'mon, cool project continued, but where is the download link.
the link does not work
(sorry my english)
Refer to first post in this thread:
http://forum.xda-developers.com/grand-quattro/orig-development/dev-cyanogenmod-11-0-t2802701
Hi. My gf was bought a Galaxy Win (GT-8552B) yesterday, and I wish to install a ~decent~ rom (the stock rom is very laggy). I have a Moto G and contribute to solve some bugs on custom roms based on CM11, and I could help the project in next stage (yeah, I cant install a ultra-experimental rom in girlfriend phone lol) Can explain what's working? (dont need be very detailed, only to we know the stage that we are)
Well, congratulation for the start. This phone owners will be very happy with CM11.
Dan_Jacques said:
Hi. My gf was bought a Galaxy Win (GT-8552B) yesterday, and I wish to install a ~decent~ rom (the stock rom is very laggy). I have a Moto G and contribute to solve some bugs on custom roms based on CM11, and I could help the project in next stage (yeah, I cant install a ultra-experimental rom in girlfriend phone lol) Can explain what's working? (dont need be very detailed, only to we know the stage that we are)
Well, congratulation for the start. This phone owners will be very happy with CM11.
Click to expand...
Click to collapse
well, as the developer said, NOTHING IS WORKING
Dan_Jacques said:
Can explain what's working? (dont need be very detailed, only to we know the stage that we are)
Click to expand...
Click to collapse
The OP mentioned it on thread at Android Development section. But, since I tested it, let me explain: the rom just boots to home screen. Nothing else is working: no camera, no audio, no wifi, no bluetooth, no carrier signal, only one SIM. But in time they will get it to work. :good:
:good:good:
mahir kukreja said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.
Quote:
#include /* * Your warranty is now void. * *
I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed.
Please * do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* * Submitting bug reports on nightly builds is the leading * cause of male impotence. */
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review.
Do not submit bugs to gerrit about this rom.
This is development thread. DO NOT ASK FOR ETAs.
so guys k2wl has told me to make this thread
as you all know ppl here have been trying really hard to getcm11 to boot on this device but they have not been sucessful !
following instructions given by k2wl and by fixing errors here and there i was able to make a bootable cm11 for this device
it has been tested by me and freitaz
it boots but nothing works im serious coz at dis time the main priority was to make it boot n then fix all the bugs later!
so when i told k2wl abt dis he said that he'll help us so lets hope for the best and i am no developer it was jst a stroke of luck tht i was able to boot it i think
so im posting here the link of my build so tht other devs for this device can use it coz i dnt think im mch experienced
http://www.mediafire.com/download/q1...delos3geur.zip
my first build
here is the device repository link
https://github.com/mahirkukreja/android_device_samsung_delos3geur
INSTRUCTIONS
First time installing CyanogenMod 11.0 to your Galaxy win Duos i8552, or coming from another ROM:
- Make sure you are on Stock 4.1.2 ROM.
- Boot into recovery(CWM 6.0.4.5 recovery is must)
- Wipe data / factory reset
- Wipe Dalvik Cache
- Flash CM10.2 ROM
- Flash Gapps
- Reboot
Gapps
http://goo.im/gapps
CWM 6.0.4.5
http://forum.xda-developers.com/show....php?t=2570950
CREDITS
Cyanogenmod Team
Samsung for source
XDA:DevDB Information
[DEV][ROM][4.4.4][UNOFFICIAL][GT-I8552] CyanogenMod 11.0 , ROM for the Samsung Galaxy Grand Quattro
Contributors
mahir kukreja
Version Information
Status: Testing
Created 2014-07-02
Last Updated 2014-07-02
Click to expand...
Click to collapse
Is it possible for you to disclose all steps?
My questions are :
1. What VM Software you used or directly developed in Linux?
2. If Linux then I586 or x64 version used?
3. Partition Schema. Specially /home.
4. Total VM Space for developing CM for one instance?
5. Version of Java used.
6. Version of make used.
7. Version of python used.
8. What API version used? 16 or else?
9. In repo what repository you have downloaded?
10. For breakfast what device name you used? delos3geur or I8552?
Regards
Used ubuntu 13.10 as dual boot 100gb partition
64bit
Cm11 takes approx 45gb space
For everything else simply followed k2wl's guide in his device repository posted in general section
mahir kukreja said:
Used ubuntu 13.10 as dual boot 100gb partition
64bit
Cm11 takes approx 45gb space
For everything else simply followed k2wl's guide in his device repository posted in general section
Click to expand...
Click to collapse
http://wiki.cyanogenmod.org/w/Build_for_t769
Note:
You want to use a 64-bit version of Linux. According to Google, 32-bit Linux environment will only work if you are building older versions prior to Gingerbread (2.3.x)/CyanogenMod 7. However, as of 10.1 CyanogenMod does not build with 64bit host binaries on some systems. You will have to set something like BUILD_HOST_32bit=1 in your environment when building on such 64bit system.
Hopefully you have set the environment.
Regards
works on GT-I8552B ???????????
mahir kukreja said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.
Quote:
#include /* * Your warranty is now void. * *
I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed.
Please * do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* * Submitting bug reports on nightly builds is the leading * cause of male impotence. */
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review.
Do not submit bugs to gerrit about this rom.
This is development thread. DO NOT ASK FOR ETAs.
so guys k2wl has told me to make this thread
as you all know ppl here have been trying really hard to getcm11 to boot on this device but they have not been sucessful !
following instructions given by k2wl and by fixing errors here and there i was able to make a bootable cm11 for this device
it has been tested by me and freitaz
it boots but nothing works im serious coz at dis time the main priority was to make it boot n then fix all the bugs later!
so when i told k2wl abt dis he said that he'll help us so lets hope for the best and i am no developer it was jst a stroke of luck tht i was able to boot it i think
so im posting here the link of my build so tht other devs for this device can use it coz i dnt think im mch experienced
http://www.mediafire.com/download/q1...delos3geur.zip
my first build
here is the device repository link
https://github.com/mahirkukreja/android_device_samsung_delos3geur
INSTRUCTIONS
First time installing CyanogenMod 11.0 to your Galaxy win Duos i8552, or coming from another ROM:
- Make sure you are on Stock 4.1.2 ROM.
- Boot into recovery(CWM 6.0.4.5 recovery is must)
- Wipe data / factory reset
- Wipe Dalvik Cache
- Flash CM10.2 ROM
- Flash Gapps
- Reboot
Gapps
http://goo.im/gapps
CWM 6.0.4.5
http://forum.xda-developers.com/show....php?t=2570950
CREDITS
Cyanogenmod Team
Samsung for source
XDA:DevDB Information
[DEV][ROM][4.4.4][UNOFFICIAL][GT-I8552] CyanogenMod 11.0 , ROM for the Samsung Galaxy Grand Quattro
Contributors
mahir kukreja
Version Information
Status: Testing
Created 2014-07-02
Last Updated 2014-07-02
Click to expand...
Click to collapse
works on GT-I8552B
RockyBR said:
works on GT-I8552B
Click to expand...
Click to collapse
GT-I8552B is the same as GT-I8552. The extra 'B' appears only in some countries.
Until Dont works
iead_20 said:
well, as the developer said, NOTHING IS WORKING
Click to expand...
Click to collapse
hello, I was release one test from instalation on my win Brazil I8552 and Still not working the ´Wi fi, Sim cards, storage, SMS, 3G network, sounds, camera . But is flashable and run very well.
Mauricio Rosa
iead_20 said:
well, as the developer said, NOTHING IS WORKING
Click to expand...
Click to collapse
mjraogr said:
hello, I was release one test from instalation on my win Brazil I8552 and Still not working the ´Wi fi, Sim cards, storage, SMS, 3G network, sounds, camera . But is flashable and run very well.
Mauricio Rosa
Click to expand...
Click to collapse
The External SD Card has already been fixed.
Audio has been partially fixed, but the audio is only from the front speakers, and mono [obviously]
Camera is not stable due to the libcamera troubles
Internal SD is being worked upon right now.
Wi-Fi, Bluetooth, and RIL is not fixed yet.
These are the updates till today.
there's something new?
Not yet, they are still trying to fix both storages... soon they will fix it and then the work around other things will increase
freitaz said:
Not yet, they are still trying to fix both storages... soon they will fix it and then the work around other things will increase
Click to expand...
Click to collapse
moved on a bit in camera as well will take a look at it after storage
n external sd is fullyfixed causes problems only when we try to mount internal sd at the correct place thats wht is taking a lotta time
I have a GT-I8552B
Install this ROM form all possible (1 * CUSTOM updating their app, 2 CUSTOM factory updating the app with no extras, 3 * formatting system).
1 * Starts and stays in the CM logo
2 * and 3 * starts normally but does not work network, wifi, bluetooth not work to my backup that I restored.
I did not test deeper fuinciona but overall very very fluid.
QUESTION:
-In the case of my computer that is DualChip, operate both SIMs?
-They be able to increase the pixels to take advantage of more screen 4.7 "?
For times we are waiting for something like this, unfortunately this phone is forgotten by Samsung, the cyanogen is amazing, and bring it to 8552 will benefit the owners of that smart. Congratulations for the initiative. @mahir @k2wl @yajnab
Sent from my GT-I8552B using XDA Premium 4 mobile app
Please Present The link of the Completly Rom Working one Soon.Waiting for long Time
dmlmagal said:
For times we are waiting for something like this, unfortunately this phone is forgotten by Samsung, the cyanogen is amazing, and bring it to 8552 will benefit the owners of that smart. Congratulations for the initiative. @mahir @k2wl @yajnab
Sent from my GT-I8552B using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Please Present The link of the Completly Rom Working one Soon.Waiting for long Time

[ROM] CyanogenMod 12 [UNOFFICIAL] [5.0.2] [tomato][WIP]

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Official CyanogenMod Wiki:http://wiki.cyanogenmod.org/w/Main_Page​
WHAT'S WORKING !!
WiFi
Bluetooth
All the sensors
All Hardware Buttons
RIL (Well, almost there - Only Incoming calls and sms for now)
WHAT'S NOT !!
Camera
Outgoing Calls
Mobile data (Not quite sure, Test it and let me know)
Installation Instructions
Backup your data
Install it from recovery
Install the Google Addons
Reboot
Enjoy!!
DOWNLOADS : Click Here
Google Apps : PA Gapps
Any Issues..? Feel free to ask and please provide logs for any issues you guys are having..
Contributors
Myself
CM Team
XDA:DevDB Information
[ROM] CyanogenMod 12 [UNOFFICIAL] [5.0.2] [tomato][WIP], ROM for the YU Yureka
Contributors
zeetherocker
ROM OS Version: 5.0.x Lollipop
Version Information
Status: Testing
Created 2015-03-04
Last Updated 2015-03-05
Reserved!!
One more!! just in case
currently I am at home, will download and test tomorrow, can you confirm please that dual sim working ?
for camera and other issues, take a look at cdesai build..
thanks..
64 bit build or 32 bit as usual??
There are two lollipop roms for 32bit builds
RajGopi said:
64 bit build or 32 bit as usual??
There are two lollipop roms for 32bit builds
Click to expand...
Click to collapse
64 bit builds require 64 bit blobs which we don't have atm. all other lollipop roms are too old now with no fresh development. if the op can get a stable working lollipop then thats good for me untill official rom (which btw is nowhere in sight)
RohanAJoshi said:
currently I am at home, will download and test tomorrow, can you confirm please that dual sim working ?
for camera and other issues, take a look at cdesai build..
thanks..
Click to expand...
Click to collapse
Dual Sim doesn't work.. Only single sim for now.. And camera is a WIP.. Will try to fix it this weekend..
And the download links are up.. Test it and leave your reviews..
Any updates on this ROM? Considering most of the things are working in this ROM,this is the closest we have to getting 5.0+ on our devices. Also, I don't want to OTA 64 bit bootloader as there might not be development for that so I have my hopes pinned on this.
Review
Okay, so first of all, thanks to zeetherocker for his work on cm12.
So, this rom is ultra smooth...Better than any rom I have used.
Camera doesnt work as mentioned in the first post.
Wasnt able to register my Sim card. says your sim doesnt allow to connect to the network.
Wifi works like a charm.
Battery life is decent.
and no problem with sound too.
played asphalt 8...the gaming experience was better than stock cm11 and cm11 based roms.
so the only issue i have is with sim card...I want to use this rom for the longest time if this could be taken care of.
also, the screen flickers sometimes.
Yureka plus flashing problem
Sir,I have heating problem with my yureka plus so I consulted YU support. They mentioned few solution's but none worked,finally they said to flash ROM with CyanogenMod 5.0.2 tomato so I have done that but at the end when clicked reboot now,my phone is again and again restarting with banded stripes repeatingly.....what to do?? ......I hope you people will help me please.

[ROM][Official][Nightly]CyanogenMod 13.0 for Huawei G620S, Honor 4/4x

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Official CyanogenMod Wiki:http://wiki.cyanogenmod.org/w/Main_Page
https://wiki.cyanogenmod.org/w/Cherry_Info
Important information:
This thread is for official CyanogenMod 13.0 builds for Huawei C8817D, C8817E, G620S, G621, Che1_CL10, Che1_CL20, Che1_L04. The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Supported device:
C8817D
C8817E
G620S-UL00
G620S-L01/L02/L03
G621-TL00
Che1_CL10
Che1_CL20
Che1_L04
Baseband requirement:
If you can't hang up, install this baseband via TWRP and it should be solved.
Known bugs:
No NFC support
Other minor bugs
TODO:
Calibrate battery capaticy display(currently not precise)
[*]Add blink support to notificiation light--->done
Stability related development
Enable doze mode(currently it's buggy, will freeze your phone, Google, when will you fix it?)
Add NFC support(as long as Qualcomm released source code for QCA1990)
Installation:
First time flashing CyanogenMod 13.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery, e.g., my TWRP: http://forum.xda-developers.com/android/development/recovery-twrp-3-0-0-0-touch-recovery-t3309504
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash CyanogenMod
Optional: Install the Google Apps addon package
Reboot
Source code:
https://github.com/cyanogenmod
Credits:
CyanogenMod Team
Code Aurora Forum
@surdu_petru Started M hacking, fixed lots of bugs
@desalesouche Did lots of sensors related hacking&experiment
@Blefish Started kernel development, code reference
@paranoia_gu Add Honor 4x support
......
Download:
http://get.cm/?device=cherry
XDA:DevDB Information
CyanogenMod, ROM for all devices (see above for details)
Contributors
dianlujitao, surdu_petru, desalesouche, paranoia_gu
Source Code: https://github.com/cyanogenmod
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Nightly
Created 2016-02-10
Last Updated 2016-03-19
Changelog:
16/2/10:
First release
16/2/11:
Support led blink mode
16/2/12:
Fix for FM reinitialisation
Optimize power for FM
16/2/22:
Disable dexpreopt (for better compatibility with xposed)
Fix "####" operator name
16/3/5:
Fix blue screen flashing on video playback
16/3/6:
Remove Qualcomm location stack
@dianlujitao,wait for the honor 4x (che1-cl1) version.
@dianlujitao
great job ! many thank,a greeting !
Does the gyroscope? Since some time ago was discovered that the G620s has.
Sorry my english.
Can this be installed on Honor 4x - Che1-L04?
I received notification in cm updater on che1-L04 about cm13 update. But on this thread as posted it seems it is not yet ready for Honor 4x - Che1-04. Please @dianlujitao put some light on this. And do let us know when you plan to release cm13 for Che1-L04. Thank You. You are Awesome.
rajattrt said:
I received notification in cm updater on che1-L04 about cm13 update. But on this thread as posted it seems it is not yet ready for Honor 4x - Che1-04. Please @dianlujitao put some light on this. And do let us know when you plan to release cm13 for Che1-L04. Thank You. You are Awesome.
Click to expand...
Click to collapse
Never. I don't own that device and can't gurantee the reworked kernel working well on that device. If someone can maintain your device, I'm glad to merge his code.
The TWRP 3.0.0.0 fails (error code 70) to install gapps, installed ROM and gapps (open / pico) with TWRP 2.8.7.0 and installed smoothly.
edit : the end I could install the Gapps with TWRP 3.0.0.0 !!! Fixed !!!
Nice one! Hope browser works flawless. Can you please provide us kernel that allows higher CPU and GPU frequiencies?
custon3 said:
The TWRP 3.0.0.0 fails (error code 70) to install gapps, installed ROM and gapps (open / pico) with TWRP 2.8.7.0 and installed smoothly.
edit : the end I could install the Gapps with TWRP 3.0.0.0 !!! Fixed !!!
Click to expand...
Click to collapse
Did you use Open gapps? What date of release?
Sent from my SM-N9005 using Tapatalk
I have problem, when i lock and unlock mobile, i can't use to touchscreen.. In device G620S-L01
Btw. I replacement digitizer.
ReDuXX528 said:
Nice one! Hope browser works flawless. Can you please provide us kernel that allows higher CPU and GPU frequiencies?
Click to expand...
Click to collapse
overclocks aren't allowed
Hello,
Yesterday I flashed nightly 12/02. Battery drains 5% per hour during night with no usage. I had the same experience with cherry 06/02 Rom. With Surdu's Rom 07/02 battery lasted for almost 4 days normal usage. I use TWRP 2.8.7.0 from surdu.
Thank you for your work.
Sent from my SM-N9005 using Tapatalk
@dianlujitao, is there any plan to port the rom to Huawei honor 4x che1- cl10?
When will this update be available for cherry device like honr 4x che1-L04
romanticky said:
Hello,
Yesterday I flashed nightly 12/02. Battery drains 5% per hour during night with no usage. I had the same experience with cherry 06/02 Rom. With Surdu's Rom 07/02 battery lasted for almost 4 days normal usage. I use TWRP 2.8.7.0 from surdu.
Thank you for your work.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
In nightly 3 or 4 cores are always active. In surdu's Rom only 1 core.
Sent from my SM-N9005 using Tapatalk
romanticky said:
In nightly 3 or 4 cores are always active. In surdu's Rom only 1 core.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
No.
juandercito said:
No.
Click to expand...
Click to collapse
After I flashed the latest nightly with full wipes including internal SD, only 1 core is working. But if I have Location/Mode/High accuracy then again 3 or 4 cores are working. Switching to Only device corrects it.
Support for Honor 4x - Che-L04
dianlujitao said:
Never. I don't own that device and can't gurantee the reworked kernel working well on that device. If someone can maintain your device, I'm glad to merge his code.
Click to expand...
Click to collapse
I am trying to build cm-13 for honor 4x but it gives me build errors. Can you help me with it?
rajattrt said:
I am trying to build cm-13 for honor 4x but it gives me build errors. Can you help me with it?
Click to expand...
Click to collapse
I don't think you're able to port a functional kernel for your device, because you can't even deal with build errors.

[ROM][UNOFFICIAL][5.1.1] Cyanogen Mod 12.1 for Huawei P8 Lite HI6210SFT

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0 (Lollipop), which is designed to increase performance and reliability over stock Android for your device..
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Do not use Social Media to ask me about the progress, use the topic instead.​CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github Repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review.
Compatibility:
ALE-L21.
Device-specific source code:
Device tree: https://github.com/hak86/android_device_huawei_hi6210sft
Kernel: has been setup and configured as prebuilt image inside device tree
Vendor: https://github.com/hak86/android_vendor_huawei_hi6210sft
Downloads:
Tell me if link work.
Gapps: use this http://opengapps.org/
What works:
Charger Led.
Display .
GPS.
NFC (Partially)
Sensors.
Wifi.
Need a lot of work to solve bugs.
Know Issues
Audio.
Bluetooth (enabled and deactivated simultaneity, need reboot to stop)
NFC
Wifi
Data and calls
Audio and video playback and recording.
Tell me more.
Installation Guide Via Recovery:
Do backup of your original system to sdcard.
Wipe Cache, Dalvik, Data and System partitions.
Make sure to have the latest TWRP..
Click on Install.
Choose the flashable version of zip
Slide to start installer.
Same thing for GAPPS package.
Once install everything just reboot the device, enjoy the rom.
Special Thanks
@XePeleato for making aosp.
@olrak
and all other hi6210sft developers
Changelogs:
Code:
[B][I]17/11/2016
[/I][/B]
-Required recovery: 2.8.7 or newer.
-flashable via TWRP (read the op for installation steps).
-rebased tree from zero mean
-Android 5.1.1 R37.
What is works:
-Android as system.
-gralloc, libion and libGLES_mali without hwcomposer for the moment.
-show install location of applications.
-add hardware key function for kirin 620 devices that have Home button.
-switch kernel to permissive mode.
What is not work:
-everything.
-the system gone in idle, I will investigate about this problem.
-will start fixes once back to home.
-I not recommend for daily drivers because it's buggy and need a lot of fixes and patches.
For logcat:
-adb logcat > log.txt
For kernel log:
-adb pull /proc/kmsg
[B][I]24/09/2016[/I][/B]
-Android 5.1.1 R38
-Security Patch: latest month.
-Wifi.
-NFC fixed partially.
-Bluetooth the driver is work but for some reason is not work properly
[B][I]05/08/2016[/I][/B]
- Alpha.
- Initial build.
-Android 5.0.2
[B][I]22/08/2016[/I][/B]
- Beta.
- Downloads: click [URL="https://basketbuild.com/filedl/devs?dev=haky86&dl=haky86/HuaweiP8Lite/Roms/CM/cm-12.1-20160822-UNOFFICIAL-hi6210sft.zip"]here[/URL].
- Android 5.1.1.
- Ambient Display: fixed .
- Brightness Level: fixed .
- Charger Led: : fixed .
- Display: now is gone into stand by when is idle.
- Flashable: now can be installed from recovery as well.
- GPS: fixed .
- GNSS: fixed .
- Keystore: fixed .
- Sensors: : fixed .
- Thermal: fixed .
XDAevDB Information
CyanogenMod 12, ROM for the Huawei P8 Lite Kirin Variants
Contributors
@haky 86
Source Code: https://github.com/cyanogenmod
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 5.0 or up
Version Information
Status: Beta
Created 2016-04-08
Last Updated 2016-05-08
Reserved
-Report if link not work
Cool, you know you can count on us if you need help with any difficult bug
XePeleato said:
Cool, you know you can count on us if you need help with any difficult bug
Click to expand...
Click to collapse
of course i am reorganize the tree for some reason its not boot after did second compilation, bah.
Very Interesting. I think this has potential. I am going to try this tomorrow. Expect my feedback.
nice work !!! thanks!!
Thx man, i share the link to this post in htcmania theres a lot of P8 Lite users in latín América and spain and maybe they miss your awsome work.
Hope you dont get mad.
Thx again and keep the good work!!
So I take it the RIL issue is almost solved. This is great for the P8 Lite community.
twinangel00 said:
Thx man, i share the link to this post in htcmania theres a lot of P8 Lite users in latín América and spain and maybe they miss your awsome work.
Hope you dont get mad.
Thx again and keep the good work!!
Click to expand...
Click to collapse
no problem bro, i am doing the best to make it stable, I hear about that forum will be a good start.
riaanck said:
So I take it the RIL issue is almost solved. This is great for the P8 Lite community.
Click to expand...
Click to collapse
Yes ril is almost, will test it tomorrow
RIL ?? Yessssssss I really hope so
Great job
Are you planning to work on cm13?
Android 5.0 i a bit... old.
But anyway I will live with 5.0 if it become stable.
dominj97 said:
Great job
Are you planning to work on cm13?
Android 5.0 i a bit... old.
But anyway I will live with 5.0 if it become stable.
Click to expand...
Click to collapse
It's a miracle getting lp booted even if old, my priority is getting stable device tree and blobs to port every king of rom.:good:
OMG This is awesome news! Thank you so much for all your work Haky and everybody involved.
Hello, It does not show the version compatible with this ROM and found the following P8 Lite models:
P8 Lite ALE-L04
P8 Lite ALE-L21
P8 Lite ALE-L02-L23
P8 Lite ALE-TL00
P8 Lite ALE-CL00
P8 Lite ALE-UL00
By what Compatible? Thanks so much!
pickmod said:
Hello, It does not show the version compatible with this ROM and found the following P8 Lite models:
P8 Lite ALE-L04
P8 Lite ALE-L21
P8 Lite ALE-L02-L23
P8 Lite ALE-TL00
P8 Lite ALE-CL00
P8 Lite ALE-UL00
By what Compatible? Thanks so much!
Click to expand...
Click to collapse
With all, except ale-l04 because it is the qualcomm variant
pickmod said:
Hello, It does not show the version compatible with this ROM and found the following P8 Lite models:
P8 Lite ALE-L04
P8 Lite ALE-L21
P8 Lite ALE-L02-L23
P8 Lite ALE-TL00
P8 Lite ALE-CL00
P8 Lite ALE-UL00
By what Compatible? Thanks so much!
Click to expand...
Click to collapse
I am wondering why qcom variant don't have any rom yet.
haky 86 said:
I am wondering why qcom variant don't have any rom yet.
Click to expand...
Click to collapse
Because no one developed one for it. Huawei phones have very less development.
However, your ROM works good even though there are many bugs to squash. However why did you chose 12.0 instead of 12.1?
hackslash said:
Because no one developed one for it. Huawei phones have very less development.
However, your ROM works good even though there are many bugs to squash. However why did you chose 12.0 instead of 12.1?
Click to expand...
Click to collapse
Strange, qcom has better support than kirin, should have bugs less than our cpu, will updated soon until fix some of bugs
Nice.. These are things that can cheer up my day, When i notice that somebody actually develops this phone..
Keep it up man!
Vika__ said:
Nice.. These are things that can cheer up my day, When i notice that somebody actually develops this phone..
Keep it up man!
Click to expand...
Click to collapse
they worked on this phone for so long, hopefully that will be first stable rom with working ril :fingers-crossed:

[ROM][6.0][UNOFFICIAL] OmniROM 6.0.1 for Huawei P8 Lite ALE-L21

Hi folks
I manage to port OmniROM 6.0 based on Android 6.0 Marshmallow to our Huawei P8 Lite here some description for you
About OmniROM
The goal of Omni is to experiment with Android development because we enjoy it. Omni isn’t better, just different. It’s another option for the billion Android users out there. Android (vs. iOS and every other mobile OS) has thrived on options as well as the gigantic, talented development community that has emerged to build those options. That’s the beauty of Android – that you can pick and choose from a smorgasbord of devices with varying features and functionality.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Works:
Android system (it's very smooth and no fc)
Audio.
Boot.img .
Deep Sleep.
GPS.
Gralloc.
NFC.
Ramdisk: I make a mixed of stock emui 4.0 C432B589 and HiKey to get booted.
Sensors.
Not Work:
Bluetooth.
Calls (RIL): a fix is in progress.
Camera: fix is in progress.
Storage: will provide a fix very soon becuase it's related to ramdisk.
Wifi: a fix in progress.
Change Logs:
-01/03/2017:
Initial Build.
Android 6.0.1 Marshmallow R74
Click to expand...
Click to collapse
Note:
Pinning apps isn't work, I think it's an issue with overlays, so to unlock the phone you need to reboot, so I don't recommend this feature for now.
Deep Sleep: the patch is work, if the display isn't turned from first time don't be afraid you have to power many time the power button, it's a problem related to keyalyout.
Compatible devices:
G Play Mini
Honor 4c.
Huawei P8 Lite.
If the rom isn't flashed by giving error 7 just write your codename variant to add it in my device tree try to flash my own twrp on your variant https://basketbuild.com/devs/haky86/HuaweiP8Lite/Recoveries/TWRP.
Downloads:
Click on the following link removed
Source Code:
Device Tree: https://github.com/hak86/android_device_hisi_hi6210sft
Kernel GPLv2 compliant Kernel: https://github.com/hak86/android_kernel_huawei_hi6210sft
Credits
@XePeleato, @olrak,
Contributors
@haky 86
Source Code: https://github.com/omnirom
ROM OS Version: 6.0 Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 5.0 or up
Version Information
Status: Demo
Created 2017-01-03
Last Updated 2017-3-03
Wow
Wow, he looks great!
Substratum works on OmniROM's?
Huawei P8 Lite Tapatalk
Zgadnijcie said:
Substratum works on OmniROM's?
Huawei P8 Lite Tapatalk
Click to expand...
Click to collapse
this one ?
https://play.google.com/store/apps/details?id=projekt.substratum
haky 86 said:
this one ?
https://play.google.com/store/apps/details?id=projekt.substratum
Click to expand...
Click to collapse
Yes this one ?
Huawei P8 Lite Tapatalk
Zgadnijcie said:
Yes this one
Huawei P8 Lite Tapatalk
Click to expand...
Click to collapse
SUBSTRATUM OMS - Custom AOSP ROMs 6.0 & 7.0 with OMS3 commits.
Substratum does NOT work with ROMs using the CM theme engine.
So i think yes, OmniROM it's based on pure android..
haky 86 said:
Hi folks
I manage to port OmniROM 6.0 based on Android 6.0 Marshmallow to our Huawei P8 Lite here some description for you
About OmniROM
The goal of Omni is to experiment with Android development because we enjoy it. Omni isn’t better, just different. It’s another option for the billion Android users out there. Android (vs. iOS and every other mobile OS) has thrived on options as well as the gigantic, talented development community that has emerged to build those options. That’s the beauty of Android – that you can pick and choose from a smorgasbord of devices with varying features and functionality.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Works:
Android system (it's very smooth and no fc)
Audio.
Boot.img .
Deep Sleep.
GPS.
Gralloc.
NFC.
Ramdisk: I make a mixed of stock emui 4.0 C432B589 and HiKey to get booted.
Sensors.
Not Work:
Bluetooth.
Calls (RIL): a fix is in progress.
Camera: fix is in progress.
Storage: will provide a fix very soon becuase it's related to ramdisk.
Wifi: a fix in progress.
Change Logs:
Note:
Pinning apps isn't work, I think it's an issue with overlays, so to unlock the phone you need to reboot, so I don't recommend this feature for now.
Deep Sleep: the patch is work, if the display isn't turned from first time don't be afraid you have to power many time the power button, it's a problem related to keyalyout.
Compatible devices:
G Play Mini
Honor 4c.
Huawei P8 Lite.
If the rom isn't flashed by giving error 7 just write your codename variant to add it in my device tree try to flash my own twrp on your variant https://basketbuild.com/devs/haky86/HuaweiP8Lite/Recoveries/TWRP.
Downloads:
Click on the following link https://basketbuild.com/devs/haky86/HuaweiP8Lite/Roms/Android-6.0.1/OmniROM
Source Code:
Device Tree: https://github.com/hak86/android_device_hisi_hi6210sft
Kernel: https://github.com/hak86/android_kernel_hisi_hi6210sft
Credits
@XePeleato, @olrak,
Contributors
@haky 86
Source Code: https://github.com/omnirom
ROM OS Version: 6.0 Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 5.0 or up
Version Information
Status: Demo
Created 2017-01-03
Last Updated 2017-3-03
Click to expand...
Click to collapse
You finally fixed the graphics,I know you were going to fix it!! Anyway,I'm waiting for a more stable version,but I'm following your work on Github,keep up!
haky 86 said:
Thanks might release a second build with worked wifi and camera until today , ciao
Click to expand...
Click to collapse
Hehe,I actually saw that you've pulled some commits about wifi a sec ago. You're resolving bugs like a machine gun against soldiers! Haha,very nice!!
Anyway,how much time are you going to need for fixing the RIL? Have you already managed to get it work or...?
Damn, we've come a long way the last couple of months.. my gut tells me there's a stable enough ROM around the corner. Good work devs! :cyclops:
@haky 86 Great work man. honestly u r awesome. never ever before i was this much happy to open this p8 lite forum. hats off to u guys. Excellent work.
Man, I appreciate this work, but why you did this? Lineage 14.1 is much better, now you have 2 projects instead of 1 (i think tuat more people wanna have l14. 1 installed than this, we already have android 6...)
D1stRU3T0R said:
Man, I appreciate this work, but why you did this? Lineage 14.1 is much better, now you have 2 projects instead of 1 (i think tuat more people wanna have l14. 1 installed than this, we already have android 6...)
Click to expand...
Click to collapse
in fact i'm gonna to download omni 7.0 this night, i also almost fixed ril here, it's not work due to permissions issue..
So , ril is fixed in this build ?? If this ia right , upload it please , iam starving to test it
I'm soooooo happy for your progress, thank you all guys for keep working and not give up!
D1stRU3T0R said:
Man, I appreciate this work, but why you did this? Lineage 14.1 is much better, now you have 2 projects instead of 1 (i think tuat more people wanna have l14. 1 installed than this, we already have android 6...)
Click to expand...
Click to collapse
I have asked haky 86 the same question in Whatsapp group, and this is his answer:
"because it's very stable rom, in fact consider the bugs there is no fc like on cyanogen and lineage.."
Sent from my HUAWEI CHM-TL00H using XDA Labs
Amazing work @haky
I will wait till wifi,ril fixed so I can use it daily.
Am I the only one who his phone can be more than 1 min before automatically reboot?
Thank you
Looking good, but what about AOSP Nougat? We have so many roms at the moment and none of them is finished and good enough for daily usage...
Gwozdem said:
Looking good, but what about AOSP Nougat? We have so many roms at the moment and none of them is finished and good enough for daily usage...
Click to expand...
Click to collapse
I will kept updating via this rom, mean omni 7.0
Good to know

Categories

Resources