4G / LTE connectivity on SIM1 - Xiaomi Redmi Note 3 Questions & Answers

Hello,
Are there any users with Redmi note 3 Pro / Snapdragon version that have issues like no 4G or LTE connectivity while using sim1?
this has worked for me when I first bought the phone.
I unlocked the bootloader - unofficial version, installed twrp, tried to flash a rom, bricked my deice, than I managed to flash 7.2.3 global stable official rom - my bootloader was relocked, but sim1 could no more connect on 4g network.
while searching for it manually I can see it, but when i click it to connect, it just registers on 3g network.
since than I have tried to reset the device, full erase, no luck.
I installed global developer rom - with locked bootloader - no luck
I received a code to unlock bootloader, i Unlocked it, but still no 4g connection on sim1.
Any idea what could be wrong?
P.S.
If I put the same SIM in slot 2, 4g connects with no issues, but I want to use that slot for the Microsd card.

And I kind of found the culprit.
The phone that is sold in many countries comes with customized miui 7.1.9.0.0 (note the extra 0) and on this rom version 4g works on sim 1, on global versions it does not.
And now I am searching for a customized rom that can't be found anywhere.

Well I had the same version 7.1.9.0.0 (the unofficial multilanguage) when I got the phone, but I have not activated the 4G on my providers. In the mean time this rom had many issues (didn't recognise the second sim etc) so I flashed with EDL and MiFlash the original Global rom (7.1.7.0) and was ΟΤΑ updated to 7.1.8.0 . Since then I have no 4g on SIM1 but it works fine in slot2
I then got permission to unlock bootloader and unlocked it by flashing the official Chinese Dev 6.3.31.
Someone on the official site reported that the baseband of the AOSP and/or 7.1.7.0 solves the problem if you flash it manually via fastboot... I tried all the following basebands but no luck either.
- AOSP rom baseband (A.2.0.c1.1-00005-8976_GEN-PACK-1)
- Stable 7.1.7.0 rom baseband (A.2.0.c1.1-00019-8976_GEN-PACK-1)
- Stable 7.2.2.0 / 7.2.3.0 rom baseband (1-00019-8976_GEN_PAC K-1.49420.2 .)
Now I have the Greek Stable 7.2.2.0 (based in the Chinese Stable and made by the official fan site in Greece Xiaomi-Hellas) and yet no 4G.
It has been reported as a bug on the official site and as they say the developers are looking to solve it within the next updates..

Hi Project_P we meet again! heh
OP: if you don't need dual sim, try adding a dummy sim on slot 1 and turn it off and keep your normal sim in slot 2. That fixed the issue for me (obviously not ideal if you need dual sim OR if you need to expand storage).

hacktek said:
Hi Project_P we meet again! heh
OP: if you don't need dual sim, try adding a dummy sim on slot 1 and turn it off and keep your normal sim in slot 2. That fixed the issue for me (obviously not ideal if you need dual sim OR if you need to expand storage).
Click to expand...
Click to collapse
That is the trick, I want to be able to use the microsd slot also. I am thinking of stripping a sim card and glue it to a microsd card as per the many tutorials out there.

Have you tried changing the cellular network type to "LTE" or similar?
I managed to regain 4g by doing this

xstrifey said:
Have you tried changing the cellular network type to "LTE" or similar?
I managed to regain 4g by doing this
Click to expand...
Click to collapse
I have tried to select it manually, but as soon as i click it, it just connects to 3g network.

There are many people who have this issue on en.miui.com/ thread-265011-1-1.html (correct the link) including me.
I came from a modified ROM 7.1.99.99 by the seller and I flash Miui (7.1.8.0) without unlocking the boatloader. Result: No LTE.
I flash the 6.3.31 the same way. No LTE too.
I set preferred network type to LTE only and no signal.
I've 4g on SIM2 when I've two SIM cards and sometimes on SIM 1. It's not stable

Hello,
I am French and I also got my phone with the Rom 7.1.9.0.(0) and I also lost 4G on slot 1. Sometimes I can have it on slot 2 by putting a second SIM card slot 2, but it is very unstable and sometimes I lose it also on slot 2. I installed all the Rom that exists but the Chinese / English, but nothing has changed . Even forcing the preferred 4G, I stay in H / H +. It's hopeless, now I think selling it but I will lose money because the 4G does not work.

Up ! We need some help here

nonyhaha said:
Hello,
Are there any users with Redmi note 3 Pro / Snapdragon version that have issues like no 4G or LTE connectivity while using sim1?
this has worked for me when I first bought the phone.
I unlocked the bootloader - unofficial version, installed twrp, tried to flash a rom, bricked my deice, than I managed to flash 7.2.3 global stable official rom - my bootloader was relocked, but sim1 could no more connect on 4g network.
while searching for it manually I can see it, but when i click it to connect, it just registers on 3g network.
since than I have tried to reset the device, full erase, no luck.
I installed global developer rom - with locked bootloader - no luck
I received a code to unlock bootloader, i Unlocked it, but still no 4g connection on sim1.
Any idea what could be wrong?
P.S.
If I put the same SIM in slot 2, 4g connects with no issues, but I want to use that slot for the Microsd card.
Click to expand...
Click to collapse
Same problems here. Have to try changing to SIM2 slot and will report back. Weird bug.
edit: Better late than never. SIM2 only supports Nano from what I can tell. Couldn't switch since I'm on Micro. Will have to try with another SIM.

Same issue here. I lost 4g in sim slot 1 somewhere along the way through changing MIUI roms (Official/Dev/China etc) trying to unlock officially.
Until today with SIM1 slot Active, and SD Card inserted - No 4g anywhere.
Today I tried the hardware mod (sticking SIM to SD Card) - I now have 4G!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

This is a method to get 4g working on SIM1 for a while. I got this info from XIaomi forums:
1. Turn off your phone
2. Put two simcard (micro & nano) that support 4G
3. Set data/internet to simcard 2
4. Eject your simcard tray without power off
5. Remove simcard 1 and put only simcard 2
6. Set LTE only on simcard 1 (using *#*#4636#*#* method)(dial that number, click phone information 1 and "Set preferred network type:" to LTE only)
7. Eject your simcard tray, and put simcard 1 again
8. Wait a few minute, if simcard 2 change to H+/3G
9. Switch data/internet to simcard 1
10. And ...... 4G/LTE work again using simcard 1.
11. After this you can eject the tray again without turning the phone off and swap SIM2 with microsd card.

I have the exact same situation as OP, even living in the same country. The thing is other users on the phone's softpedia section don't have this issue after flashing the 7.2.5.
I was hoping the 7.3.2. OTA would resolve this but there's no change.
My bug report was closed saying an update will come: http://en.miui.com/thread-280981-1-1.html.
Edit: I don't have a 2nd SIM to try that, nano-SIM too.

In_a_state said:
I have the exact same situation as OP, even living in the same country. The thing is other users on the phone's softpedia section don't have this issue after flashing the 7.2.5.
I was hoping the 7.3.2. OTA would resolve this but there's no change.
My bug report was closed saying an update will come: http://en.miui.com/thread-280981-1-1.html.
Edit: I don't have a 2nd SIM to try that, nano-SIM too.
Click to expand...
Click to collapse
Whenever you can do the truck, do it. I also got the update to 7.3.2.0, but it is now back on 3g. I will do the mod again now.

A few have reported that a factory reset solved some issues.
http://en.miui.com/forum.php?mod=viewthread&tid=279121

In_a_state said:
I have the exact same situation as OP, even living in the same country. The thing is other users on the phone's softpedia section don't have this issue after flashing the 7.2.5.
I was hoping the 7.3.2. OTA would resolve this but there's no change.
My bug report was closed saying an update will come.
Edit: I don't have a 2nd SIM to try that, nano-SIM too.
Click to expand...
Click to collapse
I have the same issue with my handset too. even after update to 7.3.
Today I tested with only nano sim in slot 2 & it started finding 4G signals.
But slot 1 still work only for 2G & 3G

Hello,
I will repeat myself once, but I can confirm that if you received your phone with the Rom 7.1.9.0.0 dealer, it is because of her that we lost 4G on slot 1.
I really tried everything, even change the line build.prop but nothing has changed, still no 4G on slot 1.
Maybe if Xiaomi is an update of the Baseband, we can recover but this is not certain.

rudyjo said:
Hello,
I will repeat myself once, but I can confirm that if you received your phone with the Rom 7.1.9.0.0 dealer, it is because of her that we lost 4G on slot 1.
I really tried everything, even change the line build.prop but nothing has changed, still no 4G on slot 1.
Maybe if Xiaomi is an update of the Baseband, we can recover but this is not certain.
Click to expand...
Click to collapse
I know that, but still, it should work normal with international rom, because it uses the same modem as all redmi note 3 snapdragons out there.

Basically, Redmi Note 3 comes in 3 versions, two Chinese ones (One with MTK and one with SD650) and Global one(SD650). The Global version is the one that is sold in India, Taiwan, Singapore and part of Europe. The Chinese SD650 version, mostly sold in China, says it supports more bands than the Global one.
Chinese SD650 version LTE bands:
B1/B2/B3/B4/B5/B7/B8
B38/B39/B40/B41(2555-2655MHz)
Global Sd650 version LTE bands:
B1/B3/B5/B7/B8
B38/B39/B40/B41(2555-2655MHz)
I bought the Chinese one as I need to have Band 4 to work with my USA carrier. It worked when i was in China, but same unfortunate thing happens the me when I came back to the States and wiped my phone to dev. I can't access 4g band 4 on Sim 1, 3g connection is bad on Sim1 too. Sim 2 works fine for two days and then the 4g downgrades to 3g and then 3g connection is on and off.

Related

STRAIGHT TALK SIM NOT BEING RECOGNIZED by GALAXY NOTE I717

I have a Straight Talk Sim.. with my Unlocked NOTE ..actually now I have 3 ST SIMS as the 1st 2 were thought maybe defective and ST sent me 2 replacements.
None of them get recognized as the message " No SIM Card" just pops up with all 3. Its not the APN settings, as I have tried all suggested and they are primarily for data and not the phone.
Any suggestions here? I have talked at length to both Samsung and ST and tehy each say its the other. Phone works fine with a TMOB SIM.
Thank you.
edfx00 said:
I have a Straight Talk Sim.. with my Unlocked NOTE ..actually now I have 3 ST SIMS as the 1st 2 were thought maybe defective and ST sent me 2 replacements.
None of them get recognized as the message " No SIM Card" just pops up with all 3. Its not the APN settings, as I have tried all suggested and they are primarily for data and not the phone.
Any suggestions here? I have talked at length to both Samsung and ST and tehy each say its the other. Phone works fine with a TMOB SIM.
Thank you.
Click to expand...
Click to collapse
It seems to me its gotta be the sim cards...bcuz i use ST with my note with no problems...and now using it with my s3 without any issues at all...from wat u posted its the sim cards...especially if phone recognize the Tmobile sim card...
Just stick the sim cards in another phone, then you'll know for sure its the ST sims.
That is interesting because there a quite a few Note's on ST SIM cards..
Rarely if ever does a SIM card go bad unless it was chewed by a dog or hit by a lightening bolt.
There is something very simple yet wrong. Wrong SIM card? It is in backwards or upside down something like that.
Why is your phone 'unlocked'? The StraightTalk SIM card should already be for the AT&T phone so no need for unlocking.
You don't need to unlock but if your ESN was carrier locked that would explain it. Phone under contract but customer stops paying on 2 year contract and it gets the boot. Just one of many examples of how to get a carrier lock.
My AT&T carrier unlocked/rooted Note ran on Tmobile and is now on ST.
These are the only settings that work right for me. Although the phone should boot with the ST SIM even if these are wrong.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yes I messed with the APN settings .. and yet those are for data . The phone as you have mentioned should boot automatically and yes many Galaxy NOtes are using Straight Talk. Now I have 3 different SIMS not working !? And yes they are in correctly etc.. if they weren't the Tmob SIM wouldnt work either.
I bought the phone New and it came unlocked as I prefer it that way rather than deal with ATT. I also travel abroad.
It's been a head scratcher.... Though I know the answer has to be out there.. I cant believe I have 3 bad SIMS in a row.
I am open to suggestions. Thank you.
ok good to know, please let me know how it goes for you, as I am also in the same boat and trying to use SL for my lovely note
did you flash custom roms?
you might want to take a look at your device informations, especially the IMEI, if its not your correct IMEI it means you've wrecked your /efs partition, search for EFS recovery to fix your imei and your sim card not recognized issue
Originally I did not..I inserted into the stock ROM. That didnt work , So then I flashed custom ROMS.. 3 different ones.. and they didnt work.
I dont understand what you mean by not the right IMEI ? Its a number.. the SIM doesnt screen IMEI's ? I bought it brand new about 6 weeks ago from Negri Electronics which specializes in unlocked phones.
They have a very good resellerating but one customer Lawrence reports something that would explain your case:
"Some of their unlocked phones (unlocked-originally branded) have the problem that they come with generic IMEI 004999010640000, this imei is generic and it is not unique. Phone won't get service in some countries(i.e UK) and it is a matter of time before this imei gets banned in US. Negri recognizes the problem but won't repair or exchange the phone, read their store policies before buying......................".
Well... then why would it work with T Mobile? I mean after all, its an ATT phone and designed to run on their networks? So it works with ATT and T MOB but not Straight Talk?
As well Thats not my IMEI, not to say perhaps its another generic one, I have no idea. You make some interesting points that I haven't heard before.
edfx00 said:
Originally I did not..I inserted into the stock ROM. That didnt work , So then I flashed custom ROMS.. 3 different ones.. and they didnt work.
I dont understand what you mean by not the right IMEI ? Its a number.. the SIM doesnt screen IMEI's ? I bought it brand new about 6 weeks ago from Negri Electronics which specializes in unlocked phones.
Click to expand...
Click to collapse
once again look at your device information - imei, and look at your imei on the box package or from under your device's battery, if they don't match then your EFS is ruined
flashing roms could cause these, but its pretty rare
edfx00 said:
Well... then why would it work with T Mobile? I mean after all, its an ATT phone and designed to run on their networks? So it works with ATT and T MOB but not Straight Talk?
As well Thats not my IMEI, not to say perhaps its another generic one, I have no idea. You make some interesting points that I haven't heard before.
Click to expand...
Click to collapse
in this case, i think you have 2 problems..
1. your device is sim carrier locked (which you could unlock manually)
2. your /EFS partition which hold your original IMEI is corrupted (you could restore/fix this too)
if you happen to have some files mentioning EFS on the root of /sdcard then you should backup those files.. you might need those to restore/fix your EFS partition
Twiq said:
in this case, i think you have 2 problems..
1. your device is sim carrier locked (which you could unlock manually)
2. your /EFS partition which hold your original IMEI is corrupted (you could restore/fix this too)
Click to expand...
Click to collapse
Thank you for your insights Twiq.
OK... The IMEI #s match. SO that's not the issue ( I think).
It's unlocked, so even though its an ATT phone, it works with Tmob SIM.
As for the EFS corruption possibility, well, it didnt work with all original Stock ROMS on Android 2.36. I rooted it thinking maybe ATT had something in there..but it still didnt work after 3 different ICS ROMs. I restored the original ROM yet still zero.
It works for Tmob. If the EFS was corrupted, then even a Tmob SIM wouldnt work.. right?
edfx00 said:
Thank you for your insights Twiq.
OK... The IMEI #s match. SO that's not the issue ( I think).
It's unlocked, so even though its an ATT phone, it works with Tmob SIM.
As for the EFS corruption possibility, well, it didnt work with all original Stock ROMS on Android 2.36. I rooted it thinking maybe ATT had something in there..but it still didnt work after 3 different ICS ROMs. I restored the original ROM yet still zero.
It works for Tmob. If the EFS was corrupted, then even a Tmob SIM wouldnt work.. right?
Click to expand...
Click to collapse
nope, then my earlier posts are irrelevant..
i think what you need here is flashing a different modem version which works with your current carrier/location.
what is your Baseband Version? it's on the about screen
you could try several modems listed Here, but flash only modems compatible with your current rom (GB/ICS)
there should be modems for international versions of Note, but i couldn't find one without downloading full rom.
edfx00 said:
It works for Tmob. If the EFS was corrupted, then even a Tmob SIM wouldnt work.. right?
Click to expand...
Click to collapse
Just cutting in here. . .
With a galaxy tab if you wanted to put in a sim from a phone T-mobile would block you and you would get a generic web page saying go buy a data plan for your tablet. The solution was to delete the efs folder and let the android system rebuild it. That rebuilt efs was the generic 0049etc. So a bad efs won't stop you on T-mobile's network.
As for esn, US GSM carriers don't block that. I asked a service rep why not, especially in the cas of stolen phones? He said those stolen phones are new customers.
Sorry there's no help in those paragraphs, but they eliminate some things. . .
I still haven't seen that you tested the ST sims in another phone. Its unlikely but a good possibility.
Twiq said:
nope, then my earlier posts are irrelevant..
i think what you need here is flashing a different modem version which works with your current carrier/location.
what is your Baseband Version? it's on the about screen
you could try several modems listed Here, but flash only modems compatible with your current rom (GB/ICS)
there should be modems for international versions of Note, but i couldn't find one without downloading full rom.
Click to expand...
Click to collapse
Baseband is i717UCLE2
I have flashed several of the ICS radios for T mobile... but that would effect the reception etc.. This didoes even recognize the SIM. From the moment the phone powers on it says "no SIM".
I talked to Negri, and they just unlock the phone just as you or I would with a code they buy in bulk.
So its no generic IMEI or any grey market stuff.
The radios it has are for ATT and this should work for an ATT StraightTalk SIM.. but it doesn't !?
Find someone with an AT&T unlocked phone. Your SIM should start up in their phone and their SIM should start your phone. If not then take it from there. I've had at least three radios that didn't work right with ST but all booted up fine.
aj_vogtman said:
Find someone with an AT&T unlocked phone. Your SIM should start up in their phone and their SIM should start your phone. If not then take it from there. I've had at least three radios that didn't work right with ST but all booted up fine.
Click to expand...
Click to collapse
Right.. this is beyond a radio issue . They dont boot. When I boot with a non activated TMOB SIM, it doesn't say " NO SIM". It boots, if I try to make a call, it will say "network unavailable".
With the ST SIMS, it immediately says "NO SIM" before it even accesses the network. Samsung said that since it reads the TMOB sim, it cant be the sim card reader.
I am grateful for all who have volunteered their expertise here, yet still have yet to find a solution though I know there is one out there. Thank you.
Dude. . . The ST sims are dead.

[Q] No Sim Card Detected, Not Registered to Network

Ok first of all, I know that there are many other similar thread, I've read a couple of them, and in frustration I decided to make another one. I believe that I have a slightly different problem here..
I flashed Ultima V11.01 just yesterday, everything was going well until this evening an error popped up, saying something like "The mobile network will be unavailable until you restart with a valid SIM card inserted.". This has happened a few times back then, so it wasn't exactly a suprise, but after a couple of restarts it kept happening until finally the SIM card is not detected at all (usually it's detected at first, stopped working a few minutes later).
I tried to put the sim card (DIY micro-sim) to other phone and it worked just fine. At this point I thought it was my sim card slot causing the troubles, but then I tried other sim card in my S3, and it worked fine, no errors.
So it's basically: Phone A + SIM A = Error
whereas Phone A + SIM B & Phone B + SIM A works fine.
And by the way, when it says "No sim card", the signal bar indicates that it's connected (it's the mobile network signal). I tried to make phone calls, got an error "Not registered to a network". Going to Settings>Wireless and networks>Mobile networks, another error "Insert SIM card to access network services.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've tried restoring to before I flashed Ultima, still no sim card detected.
Any idea?
Thanks in advance for all helps
Maybe try with an different rom..
Good luck
Super wipe then go back to stock, if still the same then sim reader is faulty.
Can you get a logcat for the radio buffer? This could shed some light on why it's misbehaving.
Using adb:
Code:
adb logcat -b radio *:V
If you can post anything you think is strange from that buffer.
cloud1strife said:
Ok first of all, I know that there are many other similar thread, I've read a couple of them, and in frustration I decided to make another one. I believe that I have a slightly different problem here..
I flashed Ultima V11.01 just yesterday, everything was going well until this evening an error popped up, saying something like "The mobile network will be unavailable until you restart with a valid SIM card inserted.". This has happened a few times back then, so it wasn't exactly a suprise, but after a couple of restarts it kept happening until finally the SIM card is not detected at all (usually it's detected at first, stopped working a few minutes later).
I tried to put the sim card (DIY micro-sim) to other phone and it worked just fine. At this point I thought it was my sim card slot causing the troubles, but then I tried other sim card in my S3, and it worked fine, no errors.
So it's basically: Phone A + SIM A = Error
whereas Phone A + SIM B & Phone B + SIM A works fine.
And by the way, when it says "No sim card", the signal bar indicates that it's connected (it's the mobile network signal). I tried to make phone calls, got an error "Not registered to a network". Going to Settings>Wireless and networks>Mobile networks, another error "Insert SIM card to access network services.
I've tried restoring to before I flashed Ultima, still no sim card detected.
Any idea?
Thanks in advance for all helps
Click to expand...
Click to collapse
you say that when you try another simcard in your phone its ok, so that would rule out anything wrong with your phone itself, even if your sim works in another phone it could be just not made correct for the s3's sims holder.
Got a new sim card, everything worked fine. Thanks guys
BHARGAV33 said:
Maybe try with an different rom..
Good luck
Click to expand...
Click to collapse
I've tried restoring back to old rom, it didn't fix the problem.
jsn256 said:
Can you get a logcat for the radio buffer? This could shed some light on why it's misbehaving.
Using adb:
Code:
adb logcat -b radio *:V
If you can post anything you think is strange from that buffer.
Click to expand...
Click to collapse
Thanks for your help mate. To be honest I don't really know where to start if i were to do what you told me, I only know flashing and rooting
friartuckme said:
you say that when you try another simcard in your phone its ok, so that would rule out anything wrong with your phone itself, even if your sim works in another phone it could be just not made correct for the s3's sims holder.
Click to expand...
Click to collapse
I got a new sim card today, it solved the problem. But it's still strange tho, the faulty sim card worked fine on other micro-sim devices (tried on iPad), it even worked on blackberry (which use normal-sized simcard)!
And by the way, the sim-card stopped working when I was still using the phone, not after I reboot or removing the card.
cloud1strife said:
Got a new sim card, everything worked fine. Thanks guys
Click to expand...
Click to collapse
Good news!
Probably some obscure hardware voltage tolerance or something came in to play here.
Guess we'll never know.
cloud1strife said:
I've tried restoring back to old rom, it didn't fix the problem.
Thanks for your help mate. To be honest I don't really know where to start if i were to do what you told me, I only know flashing and rooting
I got a new sim card today, it solved the problem. But it's still strange tho, the faulty sim card worked fine on other micro-sim devices (tried on iPad), it even worked on blackberry (which use normal-sized simcard)!
And by the way, the sim-card stopped working when I was still using the phone, not after I reboot or removing the card.
Click to expand...
Click to collapse
good to hear your problems resolved. ive made my own micro sims in the past and the sames happened, it can be a little slip of the sim that takes one of the metal contacts out of allignment,
best of luck
cloud1strife said:
Ok first of all, I know that there are many other similar thread, I've read a couple of them, and in frustration I decided to make another one. I believe that I have a slightly different problem here..
I flashed Ultima V11.01 just yesterday, everything was going well until this evening an error popped up, saying something like "The mobile network will be unavailable until you restart with a valid SIM card inserted.". This has happened a few times back then, so it wasn't exactly a suprise, but after a couple of restarts it kept happening until finally the SIM card is not detected at all (usually it's detected at first, stopped working a few minutes later).
I tried to put the sim card (DIY micro-sim) to other phone and it worked just fine. At this point I thought it was my sim card slot causing the troubles, but then I tried other sim card in my S3, and it worked fine, no errors.
So it's basically: Phone A + SIM A = Error
whereas Phone A + SIM B & Phone B + SIM A works fine.
And by the way, when it says "No sim card", the signal bar indicates that it's connected (it's the mobile network signal). I tried to make phone calls, got an error "Not registered to a network". Going to Settings>Wireless and networks>Mobile networks, another error "Insert SIM card to access network services.
I've tried restoring to before I flashed Ultima, still no sim card detected.
Any idea?
Thanks in advance for all helps
Click to expand...
Click to collapse
i had same problem, i woke up every morning with this error, all what i did is replacing a new sim card and voila! no more problems
good to hear you managed to fix it without being some major problem.
I had the same issue on a replacement S4, after my first one screen died. Anyway I took it to my local Sprint corporate store, they installed a brand new simcard in and it is now running like a champ.
No network connection.
I just replaced the sim card tray on my Galaxy S GTi9000 phone after buying a new one from ebay. I inserted the replacement after dismantling the phone which required no soldering of this component. .My previous sim card tray had a broken pin
caused by me when it got stuck and I was getting a error message that I was not registered on network. I also was instructed to insert my sim card when one pin was broken on the sim card reader.Prior to installing my Amaysim when it got stuck it was working fine.
Now on I am back to where I started trying all hardware and software solutions trying to get a network solution.
Most people would give up and I think the solution must be SIMPLE!
I have noted that on the back of the circuit board(gold panel) is scratched which could possibly indicate that the circuits could be destroyed and perhaps the fix would to replace the sim card, This SIM card works in my old Nokia but not in the Galaxy S
To the brainstrust -any solutions would be appreciated

NO 4G/LTE - Baseband Needed (kenzo)

Hello everyone!!
I received my Redmi Note 3 Pro last week. Yesterday, I received Xiaomi message saying I had been allowed to unlock bootloader. I did it, I flashed TWEP and SuperSU.
I was trying to unlock the 800mhz LTE band, although I had LTE with the other banbds, with the tools QPST and QXDM. First of all, I did a backup with QPST, in software download. In QXDM, I edited 06828 line, following this tutorial (http://forum.xda-developers.com/redmi-note/general/unlock-lte-bands-step-step-xiaomi-mi-t3084774), and transforming my original number to make it has LTE 20 band, with an app of Play Store.
What I got is no LTE, when I put the original code, after reboot, it kept without LTE. I flashed miui.eu ROM, later Resurrection Remix and today, fastboot ROM V7.3.2 official with MiFlash, and there is no LTE anymore, except in RR, in which changing the mode from settings, it catched LTE (but no WiFi).
Therefore, I think I need the originao baseband to flash it trhough TWRP or whatever, to make the phone has LTE as it had.
Thanks!!
Regards!!
Baseband version showing or not
Rahulraj943472 said:
Baseband version showing or not
Click to expand...
Click to collapse
Showing.
-8976_GEN_PACK-1.54366.1.54508.1
With 2 SIMS, no LTE on any of them. With SIM2 LTE. With SIM1 no LTE.
I also tried this: http://forum.xda-developers.com/showpost.php?p=66889532&postcount=13 But not results at all. After putting another time SIM1, SIM2 gets LTE, but SIM1 doesn´t.
Thanks!!
Regards
Hi everyone!!
I finally managed to fix it!!
Regards!
How? please share if someone need it very usefull
@miguelang611 Are you now able to use band 20?
Try it or die said:
@miguelang611 Are you now able to use band 20?
Click to expand...
Click to collapse
I´m having problems with the ADB drivers. I have tried to reinstall ADB drivers trhough 15 second xda tool, MiFlash, MiPCSuite, MiPhone, updating "Android phone" in Device manager, with 3 warning symbols... Here it´s what it shows me while I try to open adb shell:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any idea?
Regards!!
I re-tryed, but I got the same results, no LTE, just HSPA+.
Maybe some of you could try and maybe you get better results...
Regards!!
miguelang611 said:
I re-tryed, but I got the same results, no LTE, just HSPA+.
Maybe some of you could try and maybe you get better results...
Regards!!
Click to expand...
Click to collapse
Dont give up miguel! Are you sure your carrier has active band 20 in your area? I've unlocked extra bands and what I've found is with our note 3SD's we cant check the frequency that our phones are actually using to determine what band we have in our environments. The reading of the incoming frequency(number) isn't built into the software. There is that small disconnect between our roms and the hardware. Unlocking extra LTE bands work. I unlocked all possible extra LTE bands. The problem is I cant tell what bands the carrier I use is using by looking at my phone to see what band its connected on.
The best way to see if band 20 is working is use another phone that doesn't have the hardware to software disconnect. See if the device connected to lte band 20 and if you have connectivity. Then on the note 3 only enable band 20 LTE on line 6828 of sim0. I'm not sure what the value is for only band 20 LTE. Maybe someone can post it.
After you restart the phone, switch the sim to slot 2, go to cellular networks in settings and connect manually to your 4g network. After it connects and before it gets data, pop sim out while phone is on and put the card in sim0 slot. let it load for a few min, and if you don't see anything after like 3 min go to cellular networks and see if you can select the local 4g network that you know works and on band 20. If it cant see the network or doesn't automatically connect then band 20 wont make it past the phone bandpass filter.
A bandpass filter is the only thing that stands between us and being able to receive all frequency of signal: https://www.google.com/search?q=bandpass+filter&ie=utf-8&oe=utf-8
If the filter is infact the reason our unlocking full bands doesn't work then I need someone to link a bandpass filter from ebay that will allow the extra lte bands and write a short tutorial on how to solder in the new filter.
I think unlocking bands the way the hardware currently is already works. I'm not in a location to be able to test my successful lte bands unlock until next month when I'll be on AT&T.
Good luck and please PM me any new information on nv memory hacking on redmi note 3's. I am very interested.
Any progress? I can't test Band 20 because my provider doesn't support it.
miguelang611 said:
Hello everyone!!
I received my Redmi Note 3 Pro last week. Yesterday, I received Xiaomi message saying I had been allowed to unlock bootloader. I did it, I flashed TWEP and SuperSU.
I was trying to unlock the 800mhz LTE band, although I had LTE with the other banbds, with the tools QPST and QXDM. First of all, I did a backup with QPST, in software download. In QXDM, I edited 06828 line, following this tutorial (http://forum.xda-developers.com/redmi-note/general/unlock-lte-bands-step-step-xiaomi-mi-t3084774), and transforming my original number to make it has LTE 20 band, with an app of Play Store.
What I got is no LTE, when I put the original code, after reboot, it kept without LTE. I flashed miui.eu ROM, later Resurrection Remix and today, fastboot ROM V7.3.2 official with MiFlash, and there is no LTE anymore, except in RR, in which changing the mode from settings, it catched LTE (but no WiFi).
Therefore, I think I need the originao baseband to flash it trhough TWRP or whatever, to make the phone has LTE as it had.
Thanks!!
Regards!!
Click to expand...
Click to collapse
hi, how did you manage to go to diagnostic mode?
ngongi9 said:
hi, how did you manage to go to diagnostic mode?
Click to expand...
Click to collapse
in ADB type:
adb shell
su
setprop sys.usb.config diag,adb
jaguslav said:
in ADB type:
adb shell
su
setprop sys.usb.config diag,adb
Click to expand...
Click to collapse
when i try that command, nothing happens to phone.
do i need to be on fastboot mode or edl mode?
also what rom are you using?
ngongi9 said:
when i try that command, nothing happens to phone.
do i need to be on fastboot mode or edl mode?
also what rom are you using?
Click to expand...
Click to collapse
check link in first topic above, there is manual how to unlock B20 band and in step 2 use that commands instead dialers code (you see nothing on phone, just your phone opens port in device manager in PC). I have tried unlock B20 but without success and now I dont have any LTE
I am on AOSP 5.1.1
jaguslav said:
check link in first topic above, there is manual how to unlock B20 band and in step 2 use that commands instead dialers code (you see nothing on phone, just your phone opens port in device manager in PC). I have tried unlock B20 but without success and now I dont have any LTE
I am on AOSP 5.1.1
Click to expand...
Click to collapse
in device manager,it is detected as qc hs-usb qload not qc hs-usb diagnostic..
ill try it again tommorow
ngongi9 said:
in device manager,it is detected as qc hs-usb qload not qc hs-usb diagnostic..
ill try it again tommorow
Click to expand...
Click to collapse
when the phone is booted up go to developer options, turn on usb debugging. Go to notification bar, turn off MTP mode. The phone should say, connected as installer. Then you go to your adb folder and open a command prompt and put in the three commands, one at a time.
LiQuiD_FeAR said:
when the phone is booted up go to developer options, turn on usb debugging. Go to notification bar, turn off MTP mode. The phone should say, connected as installer. Then you go to your adb folder and open a command prompt and put in the three commands, one at a time.
Click to expand...
Click to collapse
i tried what you have posted, but still nothing happens, no ports tab on the device manager
i found the error, i typed usbconfig instead of usb.config
done editing,, is there an app where i can see if the bands are added??
or just by enabling the data to check for lte?
although i think it worked.. before no reception on some part of our house
now i got signal on those areas.
i researched all the lte band provided by the network(both sims)
i come from
11110000000000000000000000000000011011111
to
11111010000000001000100000000000011011111
LiQuiD_FeAR said:
Dont give up miguel! Are you sure your carrier has active band 20 in your area? I've unlocked extra bands and what I've found is with our note 3SD's we cant check the frequency that our phones are actually using to determine what band we have in our environments. The reading of the incoming frequency(number) isn't built into the software. There is that small disconnect between our roms and the hardware. Unlocking extra LTE bands work. I unlocked all possible extra LTE bands. The problem is I cant tell what bands the carrier I use is using by looking at my phone to see what band its connected on.
The best way to see if band 20 is working is use another phone that doesn't have the hardware to software disconnect. See if the device connected to lte band 20 and if you have connectivity. Then on the note 3 only enable band 20 LTE on line 6828 of sim0. I'm not sure what the value is for only band 20 LTE. Maybe someone can post it.
After you restart the phone, switch the sim to slot 2, go to cellular networks in settings and connect manually to your 4g network. After it connects and before it gets data, pop sim out while phone is on and put the card in sim0 slot. let it load for a few min, and if you don't see anything after like 3 min go to cellular networks and see if you can select the local 4g network that you know works and on band 20. If it cant see the network or doesn't automatically connect then band 20 wont make it past the phone bandpass filter.
A bandpass filter is the only thing that stands between us and being able to receive all frequency of signal: https://www.google.com/search?q=bandpass+filter&ie=utf-8&oe=utf-8
If the filter is infact the reason our unlocking full bands doesn't work then I need someone to link a bandpass filter from ebay that will allow the extra lte bands and write a short tutorial on how to solder in the new filter.
I think unlocking bands the way the hardware currently is already works. I'm not in a location to be able to test my successful lte bands unlock until next month when I'll be on AT&T.
Good luck and please PM me any new information on nv memory hacking on redmi note 3's. I am very interested.
Click to expand...
Click to collapse
Sorry for late reply friend. I first tried to just enable the LTE 20 band, disbaling the rest, but no result, I would try that hardware hack, but I will have to change to MIUI 7 once a time more.
I will give u more news soon!!!
Regards!!
Try CM13 build from @banmeifyouwant
I have fully working LTE/4G now 100% of time in Vodafone, UK. Before on MIUI... Only in some parts of Manchester, about 10%, now, perfect
Sent from my Redmi Note 3 using Tapatalk
michal89chz said:
Try CM13 build from @banmeifyouwant
I have fully working LTE/4G now 100% of time in Vodafone, UK. Before on MIUI... Only in some parts of Manchester, about 10%, now, perfect
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
finally LTE has worked with this CM13 but B20 is still locked

Only 2G on SIM1 now

For the last two or three days, my RN3 has only been connecting to 2G networks. I understand there can be issues with this in SIM2 slot (which I experienced last week), whereas SIM1 should work fine.
Anyway, after moving the sim card from SIM2 to SIM1 last week, I enjoyed 3G networks for a few days, but now it's been on 2G only. I've tried several reboots in the meantime, and the phone was off and on as well, nothing helped. Is there any known way to resolve this? I'm running latest stable CM13 (and the only other issue since day one has been no front cam).
Did you tried a factory reset?First make a back-up,because this procedure will delete all data and apps from your internal partition.
Have checked your sim card in other phone to see if it does persist connection issue?How is signal metter in your area?
For the last two or three days, my RN3 has only been connecting to 2G networks. I understand there can be issues with this in SIM2 slot (which I experienced last week), whereas SIM1 should work fine.
Anyway, after moving the sim card from SIM2 to SIM1 last week, I enjoyed 3G networks for a few days, but now it's been on 2G only. I've tried several reboots in the meantime, and the phone was off and on as well, nothing helped. Is there any known way to resolve this? I'm running latest stable CM13 (and the only other issue since day one has been no front cam).[/QUOTE]
For me, what worked was not flashing the recommended CM13 firmware. From MIUI, just flash the recovery, then CM, Gapps, done.
I get 3G now, fingerprint etc all work fine. This isn't supported by the devs but it works for me, so...
For the record, I was on the MIUI 8 Global Dev ROM when I flashed this.
@Luiggi79 - No, but I'm about to do it (and also try some other things) this weekend if I have time.
@NSDCars5 - Did you unlock "officially"? I have the "permit" to do it now, but I have to put everything back to "factory" state first (just not sure at this moment if the global ROM, which was there when I bought it, now supports official bootloader unlock or not - I believe it used to only work on Chinese MIUI ROM).
@Luiggi79 - No, but I'm about to do it (and also try some other things) this weekend if I have time.
@NSDCars5 - Did you unlock "officially"? I have the "permit" to do it now, but I have to put everything back to "factory" state first (just not sure at this moment if the global ROM, which was there when I bought it, now supports official bootloader unlock or not - I believe it used to only work on Chinese MIUI ROM).
I haven't unlocked my device bis yet because i don't need it.I saw somewhere on MIUI website that the unlocking process have nothing to do with the ROM version:global,china or developer.
Which ROM do you have installed on the device?If you have custom ROM and custom recovery image do a search for guides,to revert all "things"to factory state.Be careful if you are on custom rom,because you need to do some procedures before MIUI original ROM install;otherwise you will get a bricked device.Search and read before any action
galadroid said:
@Luiggi79 - No, but I'm about to do it (and also try some other things) this weekend if I have time.
@NSDCars5 - Did you unlock "officially"? I have the "permit" to do it now, but I have to put everything back to "factory" state first (just not sure at this moment if the global ROM, which was there when I bought it, now supports official bootloader unlock or not - I believe it used to only work on Chinese MIUI ROM).
Click to expand...
Click to collapse
galadroid said:
@Luiggi79 - No, but I'm about to do it (and also try some other things) this weekend if I have time.
@NSDCars5 - Did you unlock "officially"? I have the "permit" to do it now, but I have to put everything back to "factory" state first (just not sure at this moment if the global ROM, which was there when I bought it, now supports official bootloader unlock or not - I believe it used to only work on Chinese MIUI ROM).
Click to expand...
Click to collapse
Yep, I unlocked officially. Unlock definitely works on Global ROMs too, I unlocked mine on Global Developer.
Well, after wiping it and flashing Santhosh CM and official CM13 - 3G worked on both. (Also, front cam works in Santhosh CM, but not in the official CM13.)
It would be great to know what the reason for 2G was... the manual network scan then only displayed 2G and 4G networks from all available operators, but no 3G anywhere. I hope Privacy Guard or AfWall weren't interfering there.

Moto Z LTE band issues after 7.1.1

Hi All,
Recently Moto has pushed 7.1.1 update for Moto z. But as always, update is not flawless. It seems like LTE Band 5 and Band 40 is not working after the update. It works fine on Band 3 though.
If you guys have the same issue of 4g, kindly do the following and post the band number (or LTE frequency) on which it is not connecting.
1. Install the app LTE Discovery
2. Remove sim tray and open LTE Discovery.
On right top box, you will see LTE information as shown in below screenshot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Now insert the simtray with your sim in slot 1. You will see the app picking up information. (Note: be quick to take a screenshot or remember the band number. It will disconnect shortly. If it disconnects before you could get the band information, repeat the steps 2 and 3) If you have successfully taken a screenshot, it should look like the below pic.
4. Now post the Band which is not working in your phone and the Band that are working (If the Band is working, it should not disconnect immediately) along with your software channel.
In my case, Band 3 is working and Band 5 and 40 are not working. Mine is RETIN.
PS. If you cannot view the image, please download the attachment as a zip file.
Same issue since 7.1.1
Hi,
after installing 7.1.1 this morning it seems i got the same issues.
My little network strength display triangle shows a very small x on the right side, and no mobile data flow.
If connected to HSDPA everyting works fine, as well phone calls are ok (no phone via LTE here).
Talking to a technitian of my provider (Hutchison 3 Austria) he told me he could monitor my phone trying to connect,
changing between 4G and 3G but no data flow.
Now, LTE Discovery shows my Z jumps between Band 1 and 3, but not establishing any stable connection.
Softwarechannel is 'reteu'
Talking to a Motorola online help chat they just told me to send my Z in for repairing (after it didnt work in safe mode as well).
Now, what to do?
P.S.: its already my 2nd Z, as my first one crashed its SW and after restart had excellent 4G internet, but no more phone working, as it didnt switch back to HSDPA or 3G
4G/LTE issue after 7.1.1. update - Moto Z
Hi,
This LTE / 4G issue is the same on my Moto Z too after the 7.1.1. update.
Only 4G/LTE not works, 3G/2G works fine... but who use those?
I've contactet the US and the Europe Support of Motorola too.
And after reading a lot of topics about this problem, I said them, to make a fix for this, because its a global issue, and lot of people just can't use it's 4G/LTE mobile network.
They told me to go to my service provider. I did it, we tried my SIM card in other mobile brands, 4G works perfectly, only the Moto Z can't connect to 4G/LTE.
As U guys said, yes the LTE Bands are the problem on our region.
For example, my case is the following:
Region: Hungary
Service provider: Telenor
Bands that are have to be enabled/supported on this region with this service provider: B3, B7, B20.
I tried the LTE Discovery app too, and I saw that my phone trying to connect to the B20 and B3 but not establishing any stable connection.
At the moment I really don't know what can I do.
ElmarW said:
Hi,
after installing 7.1.1 this morning it seems i got the same issues.
My little network strength display triangle shows a very small x on the right side, and no mobile data flow.
If connected to HSDPA everyting works fine, as well phone calls are ok (no phone via LTE here).
Talking to a technitian of my provider (Hutchison 3 Austria) he told me he could monitor my phone trying to connect,
changing between 4G and 3G but no data flow.
Now, LTE Discovery shows my Z jumps between Band 1 and 3, but not establishing any stable connection.
Softwarechannel is 'reteu'
Talking to a Motorola online help chat they just told me to send my Z in for repairing (after it didnt work in safe mode as well).
Now, what to do?
P.S.: its already my 2nd Z, as my first one crashed its SW and after restart had excellent 4G internet, but no more phone working, as it didnt switch back to HSDPA or 3G
Click to expand...
Click to collapse
Hi, thanks for sharing.. Moto customer care is virtually useless. I tried contacting their technical team with no success. My best guess is, Moto screwed up with their modem configuration. In RETIN device, B5 and B40 are not working. I am guessing B5 and B40 is not available in Europe. B3 (which is a common band in Europe) is working fine in RETIN.
If they find out the issue, they can fix within a week. Probably flashing modem (NON-HLOS.bin - was the modem file in Moto firmware, I am not sure if they are still using the same name. It's been a while since I did these things.) from an old firmware should also fix this issue..
I would suggest you to wait till the next update, I am still trying to point this issue our to Moto tech team.
ElmarW said:
Hi,
after installing 7.1.1 this morning it seems i got the same issues.
My little network strength display triangle shows a very small x on the right side, and no mobile data flow.
If connected to HSDPA everyting works fine, as well phone calls are ok (no phone via LTE here).
Talking to a technitian of my provider (Hutchison 3 Austria) he told me he could monitor my phone trying to connect,
changing between 4G and 3G but no data flow.
Now, LTE Discovery shows my Z jumps between Band 1 and 3, but not establishing any stable connection.
Softwarechannel is 'reteu'
Talking to a Motorola online help chat they just told me to send my Z in for repairing (after it didnt work in safe mode as well).
Now, what to do?
P.S.: its already my 2nd Z, as my first one crashed its SW and after restart had excellent 4G internet, but no more phone working, as it didnt switch back to HSDPA or 3G
Click to expand...
Click to collapse
Th3SuperMan said:
Hi,
This LTE / 4G issue is the same on my Moto Z too after the 7.1.1. update.
Only 4G/LTE not works, 3G/2G works fine... but who use those?
I've contactet the US and the Europe Support of Motorola too.
And after reading a lot of topics about this problem, I said them, to make a fix for this, because its a global issue, and lot of people just can't use it's 4G/LTE mobile network.
They told me to go to my service provider. I did it, we tried my SIM card in other mobile brands, 4G works perfectly, only the Moto Z can't connect to 4G/LTE.
As U guys said, yes the LTE Bands are the problem on our region.
For example, my case is the following:
Region: Hungary
Service provider: Telenor
Bands that are have to be enabled/supported on this region with this service provider: B3, B7, B20.
I tried the LTE Discovery app too, and I saw that my phone trying to connect to the B20 and B3 but not establishing any stable connection.
At the moment I really don't know what can I do.
Click to expand...
Click to collapse
Hi, I am from India. After the update, my phone worked fine.. I was very happy, but I came to my hometown for the weekend. On my way, signal dropped. And since then I am managing with wifi. My carrier is a 4g only carrier. I don't have any other number too. I really hope to get signal back in the place where I work. (Band 3 seems to be working in RETIN device).
I am quite sure this is a minor bug on the technical implementation front. Moto can fix it in a week, if they come to know about the issue and it's seriousness. Being a well established brand, this is definitely not a thing you wanna do. It is a blunder by Lenovo owned Moto.
Aingaran said:
I am quite sure this is a minor bug on the technical implementation front. Moto can fix it in a week, if they come to know about the issue and it's seriousness. Being a well established brand, this is definitely not a thing you wanna do. It is a blunder by Lenovo owned Moto.
Click to expand...
Click to collapse
The same problem in Poland. No internet on B3/B20. LTE at B1 works (other provider).
Is there anyone in the USA that is experiencing these LTE issues since installing 7.1.1, or is this purely an international issue? So far since installing 7.1.1 the only problems I've encountered were screen freeze/reboot. But as far as my LTE strength with Verizon Wireless goes, everything is status quo.
I am in the USA, using att, and after updating to 7.1.1 I had the phone set to 3G only here and it was effectively stuck with no option to enable LTE. A network reset fixed that and now I am ONLY on LTE and often it seems to lose the signal. I will try to run the diagnostic tool today. Seems it is a problem on Lenovo side for sure.
Same issue for me in Hungary (B7 connects well in the downtown area, but suburbs only has B3 and B20, those don't have any data connection at all).
I started a thread on the Lenovo forums about this, and many users confirmed, but still not reply from any official Moto account. I also tried the Moto UK support by email, and they said if factory reset doesn't work (no it doesn't), i should send the phone in for repairs. Since my phone is from Germany, that would be quite a hassle
Has anybody tried to downgrade? For RETEU models there is a 6.0.1 fw version available that would be installed via mfastboot. Or maybe just the radio modem...?
sheratan_b said:
Same issue for me in Hungary (B7 connects well in the downtown area, but suburbs only has B3 and B20, those don't have any data connection at all).
I started a thread on the Lenovo forums about this, and many users confirmed, but still not reply from any official Moto account. I also tried the Moto UK support by email, and they said if factory reset doesn't work (no it doesn't), i should send the phone in for repairs. Since my phone is from Germany, that would be quite a hassle
Has anybody tried to downgrade? For RETEU models there is a 6.0.1 fw version available that would be installed via mfastboot. Or maybe just the radio modem...?
Click to expand...
Click to collapse
Don't try to downgrade to M, it will brick your device because the bootloader has changed from M to N. You can flash the RETBR N firmware via fastboot or RSD-lite. This is the only way to revert to stock 7.1.1 for RETEU devices. The softwarechannel changes automatically into RETEU after flashing and, once booted, you can take several OTAs until 7.1.1.
https://mirrors.lolinet.com/firmware/moto/griffin/official/RETBR/
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp adspso.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase ddr
fastboot reboot[
If you had issues with 7.1.1 you could stay with the latest 7.0, witch is NPLS25.86-30-12 and don't accept the 7.1.1 OTA.
I have the Moto Z force from verizon and after 7.1.1 i can not connecto to LTE 4g,
I'm using this phone with T -Mobile, but i was working fine before the update..
Any news?
Thanks
Band 7 and 8 missing
Getting Band 1,3 and 20 here in Czech Republic with Vodafone.
Band 7 and 8 are missing, as well as the complete absence of LTE-banner, enchanced LTe and VoLTE.
Been using LTE-discovery-app to log, as well as a brief switch of provider (Telenor) to confirm. Have also reported in the Lenovo-forum.
mirrormurr
This is still an ongoing issue for me. I guess we just live with it dropping the connection and not having full LTE support until the next update, anyone who had their device "serviced" have any better luck?
Well, I ended up sending mine off for service and I am on 7.1.1 from the factory on retus.
My problems seem to be fixed. I'm still pretty salty about this and will likely wait eons before Oreo if it ever drops.

Categories

Resources