i have a nandroid backup of boot,system,data on my sd card,by mistake i formatted my internal storage now when i restored my backup i am getting boot loops plz help
Wipe system, data, cache & dalvik cache then restore the backup.
Joshwin Aranha said:
Wipe system, data, cache & dalvik cache then restore the backup.
Click to expand...
Click to collapse
I did that
after restoring it boots than a black screen appears where only power button works.
i can boot into my twrp from there if i flash stock rom will it work ?
or will i have to flash stock recovery before flashing stock rom ?
W!ld said:
i can boot into my twrp from there if i flash stock rom will it work ?
or will i have to flash stock recovery before flashing stock rom ?
Click to expand...
Click to collapse
Stock Recovery - Download
Stock ROM - Download
Source - Here
Instructions:
1. Download both the ROM & Recovery
2. Flash the OnePlus Recovery by fastboot
3. Copy the ROM to your Device
4. Boot into OnePlus Recovery
5. Selct English Language, then Install from Local, Find the ROMs zip file, and select it.
6. Flashing will begin, after it completes, reboot the device if it does not automatically reboot.
7. Profit
Edit - After this, you can flash back TWRP again.
Joshwin Aranha said:
Stock Recovery - Download
Stock ROM - Download
Source - Here
Instructions:
1. Download both the ROM & Recovery
2. Flash the OnePlus Recovery by fastboot
3. Copy the ROM to your Device
4. Boot into OnePlus Recovery
5. Selct English Language, then Install from Local, Find the ROMs zip file, and select it.
6. Flashing will begin, after it completes, reboot the device if it does not automatically reboot.
7. Profit
Edit - After this, you can flash back TWRP again.
Click to expand...
Click to collapse
thanks a lot!
can't i directly flash stock rom from twrp instead of flashing stock recovery?
W!ld said:
thanks a lot!
can't i directly flash stock rom from twrp instead of flashing stock recovery?
Click to expand...
Click to collapse
Sure, you can. Just wipe everything, other than Internal Storage, the go to Install, select the Stock ROMs zip, swipe to confirm flash, when its done, wipe cache & dalvik and reboot.
Joshwin Aranha said:
Sure, you can. Just wipe everything, other than Internal Storage, the go to Install, select the Stock ROMs zip, swipe to confirm flash, when its done, wipe cache & dalvik and reboot.
Click to expand...
Click to collapse
Thanks a lot !!
i flashed stock recovery then flashed rom .
But after rebooting it loads forever.
Joshwin Aranha said:
Sure, you can. Just wipe everything, other than Internal Storage, the go to Install, select the Stock ROMs zip, swipe to confirm flash, when its done, wipe cache & dalvik and reboot.
Click to expand...
Click to collapse
i flashed stock recovery then flashed rom .
But after rebooting it loads forever.
W!ld said:
i flashed stock recovery then flashed rom .
But after rebooting it loads forever.
Click to expand...
Click to collapse
Thats strange, did you flash anything else with the ROM ? Any mods etc ?
Are you sure your data, cache & system partitions are in ext4 filesystems ?
earlier i flashed blu spark kernel and converted data and cache to f2fs.
but now i installed stock recovery and flashed only stock rom nothing else.
Joshwin Aranha said:
Thats strange, did you flash anything else with the ROM ? Any mods etc ?
Are you sure your data, cache & system partitions are in ext4 filesystems ?
Click to expand...
Click to collapse
earlier i flashed blu spark kernel and converted data and cache to f2fs.
but now i installed stock recovery and flashed only stock rom nothing else.
W!ld said:
earlier i flashed blu spark kernel and converted data and cache to f2fs.
but now i installed stock recovery and flashed only stock rom nothing else.
Click to expand...
Click to collapse
Thats the problem LoL, convert /data & /cache to ext4 again, then do a full wipe again, then flash the ROM, then when it completes, wipe cache & dalvik & reboot.
Joshwin Aranha said:
Thats the problem LoL, convert /data & /cache to ext4 again, then do a full wipe again, then flash the ROM, then when it completes, wipe cache & dalvik & reboot.
Click to expand...
Click to collapse
i have checked data system cache all are ext4.
flashed once again still in boot loop.
this is scary now please help.
W!ld said:
i have checked data system cache all are ext4.
flashed once again still in boot loop.
this is scary now please help.
Click to expand...
Click to collapse
Can you post screenshots of your data, system & cache being ext4 ?
Also, when you're flashing this ROM, dont flash anything else, Nothing at all, only this 800MB zip package.
Edit - Use TWRP for all this.
Joshwin Aranha said:
Can you post screenshots of your data, system & cache being ext4 ?
Also, when you're flashing this ROM, dont flash anything else, Nothing at all, only this 800MB zip package.
Edit - Use TWRP for all this.
Click to expand...
Click to collapse
could it be due to boot.img or something..
ya psoting screenshots 1 min
W!ld said:
could it be due to boot.img or something..
ya psoting screenshots 1 min
Click to expand...
Click to collapse
Are there any errors during the Flashing of ROM package ?
Joshwin Aranha said:
Are there any errors during the Flashing of ROM package ?
Click to expand...
Click to collapse
no errors
Joshwin Aranha said:
Are there any errors during the Flashing of ROM package ?
Click to expand...
Click to collapse
2 of above screenshot is of internal storage state
Related
Im currently using ver1.0 Pro but cannot seem to download any other versions after that.
I tried even Infinitum Project, i cant seem to get it pass the start screen.(meaning before the boot animation). Similar when flashing RR ver1.1 onwards
I think i cannot go anywhere after android 4.0.4. I am only able to flash back to v1.0 (Android 4.0.3).
what could be the problem? help?
can u explain the process you followed for the installation of the other roms after 1.0?
oh sorry.
For the RR Pro 1.3
full wipe
installed rom
reboot.
Infinatium project,
Full wipe
installed rom
installed gapps
installed themed gapps
reboot.
I would usually just follow the instructions that are given.
sorry too I were configuring my cellphone, just flashed to the 1.3 and works fine...
sometimes my sd card give me problems and I remove from the device, maybe it's not your case...
and additional to the wipe, I wipe the dalvik cache, and then install the rom.
In the roms in wich I got troubles with the start screen or rebooting its because the baseband (LPQ in my case) and I'm serching foward about these thing...
sorry about my english, but its not my native languaje
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
jonsim86 said:
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
Click to expand...
Click to collapse
Apart from asking the dev i suggest a full wipe and clean flash may cure the usual Kernel Panic .
jje
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
jonsim86 said:
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
Click to expand...
Click to collapse
wipe data,cache,dalvik cache and format system from mount and storage.
after installing also wipe cache and dalvik cache then reboot.hope this solves ur problem.
meaning to say i should delete everything in my storage and sd card? like format the memory?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
formatting system doesn't format ur sdcard data, it only
formats system folder.
sorry im quite a noob so... how do i format the system?
jonsim86 said:
sorry im quite a noob so... how do i format the system?
Click to expand...
Click to collapse
go to recovery mode then mount and storage and select format system.
giving it a try. Thanks
i just cant seem to install anything after v1.
from v1. siyah kernel v3.
did a data wipe
cache wipe
format system
divak wipe
install rom
install gapps fix
reboot
it just get stuck at start up before the bootanimation. why?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
yeap it just clears the system data, then you can do a clean flash from there. that should do it
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
jonsim86 said:
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
Click to expand...
Click to collapse
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Azure Flame Kite said:
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Click to expand...
Click to collapse
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
MyLifeRocks10 said:
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
Click to expand...
Click to collapse
If you just relax for a minute , take a deep breath and start from the beginning. Listen to what people are telling you. Follow step by step from the beginning. Read what the developer says on flashing the rom and then it will work. Almost impossible not to get the rom working after that. It will all come together mate. Read a lot of posts. Good luck.
Sent from my GT-I9100 using xda premium
FXP said:
HOWTO
Install instructions:
1. Install a Recovery (there are some around this forum)
2. Flash Rom
3. Flash gapps
4. Wipe (only required 1st time)
5. Flash kernel (fastboot flash boot boot.img)
Click to expand...
Click to collapse
Hope I'm not making a fool out of myself..
But, why are the instructions in that order?
The normal way to go is:
Flash kernel > factory/cache partition/system/dalvik cache wipe > Install the ROM > Install any .zip (fixes, addons, apps) > Reboot.
Is there any specific reason why the steps mentioned by the OP are in this order?
Thank you!
hmnk said:
Hope I'm not making a fool out of myself..
But, why are the instructions in that order?
The normal way to go is:
Flash kernel > factory/cache partition/system/dalvik cache wipe > Install the ROM > Install any .zip (fixes, addons, apps) > Reboot.
Is there any specific reason why the steps mentioned by the OP are in this order?
Thank you!
Click to expand...
Click to collapse
Replace 1 with 5 and then install.
evilbarcode said:
Replace 1 with 5 and then install.
Click to expand...
Click to collapse
Aye aye..
BTW, just out of inquisitiveness, why did the OP mention the steps in that order?
hmnk said:
Aye aye..
BTW, just out of inquisitiveness, why did the OP mention the steps in that order?
Click to expand...
Click to collapse
Not too sure, I have a slight feeling they messed up when writing it all down. But kernel is always first. After kernel dont boot the rom, just power on and head to recovery. Full wipe, format system, install rom, install gapps, full wipe and wipe dalvik cache, then reboot and watch the magic.
evilbarcode said:
Not too sure, I have a slight feeling they messed up when writing it all down. But kernel is always first. After kernel dont boot the rom, just power on and head to recovery. Full wipe, format system, install rom, install gapps, full wipe and wipe dalvik cache, then reboot and watch the magic.
Click to expand...
Click to collapse
Haha ok..
CM9 was great itself, now lets see what CM10 has in store for me
evilbarcode said:
Not too sure, I have a slight feeling they messed up when writing it all down. But kernel is always first. After kernel dont boot the rom, just power on and head to recovery. Full wipe, format system, install rom, install gapps, full wipe and wipe dalvik cache, then reboot and watch the magic.
Click to expand...
Click to collapse
It doesn't matter, if you have recovery in previous ROM you can flash new ROM first in old reco and then flash kernel in fastboot.
May be the answer lies in here..
hmnk said:
Ok problem solved..
build.prop error means I have to use a Kernel that doesn't verify name in build.prop..
So I tried expeacer's MIUI Kernel(Extended stock kernel) and I was able to install CM10..
This info was courtesy of metalrawk
This could possibly be the reason why FXP instructed to flash the Kernel after ROM installation
Click to expand...
Click to collapse
evilbarcode said:
Replace 1 with 5 and then install.
Click to expand...
Click to collapse
that is the best way, it worked for me thanks a lot
tnx
Tnx it helped me too
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
andyzeng1993 said:
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
Click to expand...
Click to collapse
Flash kernel with Odin.[http://forum.xda-developers.com/showthread.php?t=1617219]
After your phone is booted put the phone into recovery modes., In CWM do you wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage.Then install Rom from sdcard.
andyzeng1993 said:
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
Click to expand...
Click to collapse
have you checked md5sum: e9c809385764bc6083616ce8cd5b0f36?
once downloaded, it should have the same md5..
wow.. size: 150.21mb? that's pretty lite
Tequila6808 said:
Flash kernel with Odin.[http://forum.xda-developers.com/showthread.php?t=1617219]
After your phone is booted put the phone into recovery modes., In CWM do you wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage.Then install Rom from sdcard.
Click to expand...
Click to collapse
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
andyzeng1993 said:
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
Click to expand...
Click to collapse
thats not a rom ma8, but a kernel to root ur phone first, so that u can install any custom rom of ur choice
andyzeng1993 said:
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
Click to expand...
Click to collapse
what he is trying to say is that you should flash the kernel AFTER you flash your ROM
the ROM you chose is [CM10][Jellybro] i9100 Nightly Kangs, yes?
anyway..
here is what you should do
1. flash your rom
2. flash gapps for cm10
3. flash a kernel [an example of which is Dorimanx Kernel]
if you are still confused on some terms, please refer here
I hope this helps
EDIT:
you should root your phone first
You know, after flashing a new rom booting may take some more time, at least a few minutes. Have you been waiting enough time?
First, check md5sum of ROM [what Saywhatt wrote a few posts back]
a. If you are no longer in recovery modes then you can get a kernel [tar file] Flashing with Odin.
If your phone then starts normally, then flash the ROM you want through CWM.
*** wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage / flash ROM from sdcard***
b. If you can get into recovery mode, not flash with Odin, but do these same steps;
**** wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage / flash ROM from sdcard***
PS. If it fails in step a first flash stock ROM with Odin
sorry for my bad english
saywhatt said:
what he is trying to say is that you should flash the kernel AFTER you flash your ROM
the ROM you chose is [CM10][Jellybro] i9100 Nightly Kangs, yes?
anyway..
here is what you should do
1. flash your rom
2. flash gapps for cm10
3. flash a kernel [an example of which is Dorimanx Kernel]
if you are still confused on some terms, please refer here
I hope this helps
EDIT:
you should root your phone first
Click to expand...
Click to collapse
I installed stock ICS, rooted and has recovery mod, wiped cache data battery dalvik, installed the ROM in recovery mode, installed Gapps, and installed kernel, and now it boots to dorimanx's kernel screen and it stops.. and turns black... same thing
andyzeng1993 said:
I installed stock ICS, rooted and has recovery mod, wiped cache data battery dalvik, installed the ROM in recovery mode, installed Gapps, and installed kernel, and now it boots to dorimanx's kernel screen and it stops.. and turns black... same thing
Click to expand...
Click to collapse
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Tequila6808 said:
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Click to expand...
Click to collapse
i flashed this "http://androidforums.com/galaxy-s2-international-all-things-root/632804-dorimanx-kernel-ics-jb-dummies-guide.html"
in the
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x)."
downloaded and flashed this in recovery
Tequila6808 said:
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Click to expand...
Click to collapse
I flashed this
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x).
Hawker's GS2Wiper download."
Under this link " http://androidforums.com/galaxy-s2-...804-dorimanx-kernel-ics-jb-dummies-guide.html "
andyzeng1993 said:
i flashed this "http://androidforums.com/galaxy-s2-international-all-things-root/632804-dorimanx-kernel-ics-jb-dummies-guide.html"
in the
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x)."
downloaded and flashed this in recovery
Click to expand...
Click to collapse
Go to :http://dorimanx.shine.sk/ and flash v7.4 JB-MALI
Tequila6808 said:
Go to :http://dorimanx.shine.sk/ and flash v7.4 JB-MALI
Click to expand...
Click to collapse
thanks i got it working but i keep getting a message says "unfortunately system UI has stopped working" ???
and all my contacts are gone? but my contacts are all saved in SIM card? but nothing pops up...
and also my drop down menu isn't working, when i scroll down from the top, nothing drops down...
andyzeng1993 said:
thanks i got it working but i keep getting a message says "unfortunately system UI has stopped working" ???
and all my contacts are gone? but my contacts are all saved in SIM card? but nothing pops up...
and also my drop down menu isn't working, when i scroll down from the top, nothing drops down...
Click to expand...
Click to collapse
Reflash Rom without wipe and wipe cache.Or try another Rom.
Tequila6808 said:
Reflash Rom without wipe and wipe cache.Or try another Rom.
Click to expand...
Click to collapse
any rom you suggest?
andyzeng1993 said:
any rom you suggest?
Click to expand...
Click to collapse
Yeah stock 4.0.3 and leave it at that.
I dont think you are cut out for all this modding
andyzeng1993 said:
any rom you suggest?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1569686
Hi!
I rooted my wt19i phone and installed a 5.0.2.7 recovery.
Then I went to recovery and wipe/format everything for the new rom, but the rom wasn't on the SD.
Then I reboot my phone, but I couldn't step in again into the recovery.
What is the problem?
Why can't I go into recovery?
Pls, help!
ps: sorry for my english, I'm hungarian
Tonchi said:
Hi!
I rooted my wt19i phone and installed a 5.0.2.7 recovery.
Then I went to recovery and wipe/format everything for the new rom, but the rom wasn't on the SD.
Then I reboot my phone, but I couldn't step in again into the recovery.
What is the problem?
Why can't I go into recovery?
Pls, help!
ps: sorry for my english, I'm hungarian
Click to expand...
Click to collapse
That's because maybe you click in the option format sd card. When you install a new rom, just wipe cache, wipe dalvik & if in the thread rom said that you need to wipe data, you must wipe it. Not format anything.
mauam said:
That's because maybe you click in the option format sd card. When you install a new rom, just wipe cache, wipe dalvik & if in the thread rom said that you need to wipe data, you must wipe it. Not format anything.
Click to expand...
Click to collapse
So, in the mount and storage menu doesn't have to format, okay.
Woth flashtool, i put on my phone a 4.0.2.A.0.58 rom.
So, i think, i'm fine
THX!
I think You have locked bootloader, so when You wipe everything, doesn't install new ROM and reboot device - You have also wiped recovery That's why You wasn't able to boot into it : )
Bolussimo said:
I think You have locked bootloader, so when You wipe everything, doesn't install new ROM and reboot device - You have also wiped recovery That's why You wasn't able to boot into it : )
Click to expand...
Click to collapse
That's right. If you haven't flashed a kernel with a recovery mode installing a recovery by any other method installs it to the system partition.
you can find a flashable zip for cwm recovery in themes and apps section. remember to flash it whenever you change your rom before exiting recovery mode.
Hi guys,
I successfully followed the advice on this thread (http://forum.xda-developers.com/galaxy-s2/help/to-mod-s2-t3189884) and I have installed CM12.1 's nightly from 29/8.
I boot in once, no problem. But on the second boot the phone bricks. The only way I can get into the system again is to load Philz kernel again and reinstall. But after the second boot the phone bricks again.
Any ideas? It may be the nightly, but even updating to the latest (31/8) didn't fix this.
I can get the CM10.1 stable to work fine, but that drain my battery faster than I can charge it.
I'd like to use 12.1, though: am I just doing something wrong that causes the bricking?
thanks,
blahsum said:
Hi guys,
I successfully followed the advice on this thread (http://forum.xda-developers.com/galaxy-s2/help/to-mod-s2-t3189884) and I have installed CM12.1 's nightly from 29/8.
I boot in once, no problem. But on the second boot the phone bricks. The only way I can get into the system again is to load Philz kernel again and reinstall. But after the second boot the phone bricks again.
Any ideas? It may be the nightly, but even updating to the latest (31/8) didn't fix this.
I can get the CM10.1 stable to work fine, but that drain my battery faster than I can charge it.
I'd like to use 12.1, though: am I just doing something wrong that causes the bricking?
thanks,
Click to expand...
Click to collapse
Clean install the rom!!
1.At first Flash stock rom
2.flash philz kernel
3.Reboot to recovery
4.Wipe Cache Partition and Dalvik/ART Cache
5.Now click on Clean to Install New ROM
6.Install the rom
7.Reboot system
Don't forget to hit the thanks button
Sureshtuty said:
Clean install the rom!!
1.At first Flash stock rom
2.flash philz kernel
3.Reboot to recovery
4.Wipe Cache Partition and Dalvik/ART Cache
5.Now click on Clean to Install New ROM
6.Install the rom
7.Reboot system
Don't forget to hit the thanks button
Click to expand...
Click to collapse
When you say I should flash the rom, do you mean I should unzip the stock and push it with Heimdall/Odin?
blahsum said:
When you say I should flash the rom, do you mean I should unzip the stock and push it with Heimdall/Odin?
Click to expand...
Click to collapse
I mean before flashing any custom rom flash stock rom then flash that rom which u want.
1.download stock firmware flash it with odin
2.then flash philz kernel
3.Reboot to recovery
4.Wipe Cache Partition and Dalvik/ART Cache
5.Now click on Clean to Install New ROM
6.Install the rom
7.Reboot system
Don't forget to hit the thanks button
Excellent, thank you!
A few tips to anyone looking this up:
First, I used Heimdall - but apparently Odin is quite similar.
I had to unpack the stock rom and then individually flash the factoryfs and zimage files.
I then unpacked the Phils mod and flashed the zimage again.
That was all in download mode
After that I flashed CM12 in recovery mode.