[GUIDE] Increase fingerprint device unlock quota [29 May 2016] - OnePlus 2 General

Since I stumbled over several people recently, who actually have not a good fingerprint device unlock quota (none of them used a OnePlus 2 btw.) due to very dry or also very wet or greasy fingers, I thought I have to share my solution with you as well. Maybe some use this solution already, but for the others, here's the simple way how to increase the fingerprint unlock quota.
It's simple as that:
Add your mainly used fingerprints twice or more to ensure a better unlock quota. Try applying with different conditions, like with dry and wet/greasy fingertips.
That's it. The result for others were better and for me (very dry fingers) it even works faster now or at least it feels like a faster detection.
Please share your experience, if you had problems before adding further fingerprints, I'm curious

Simple yet useful. Thanks buddy.

I did this and now my fps is dead when i try to unlock it says fps hardware not working and i cant unlock via code. Clean flashing new rom doesnt fix it...
Gesendet von meinem oneplus2 mit Tapatalk

What i did is to actually register the fingerprint of the edge area of my thumb as another finger. And i agree, it now detect my thumb faster

krishna442 said:
Simple yet useful. Thanks buddy.
Click to expand...
Click to collapse
Thanks, you're welcome.
Kutn said:
I did this and now my fps is dead when i try to unlock it says fps hardware not working and i cant unlock via code. Clean flashing new rom doesnt fix it...
Gesendet von meinem oneplus2 mit Tapatalk
Click to expand...
Click to collapse
But you know, that this defect is not caused by adding another fingerprint twice, right? However, pretty annoying that it's broken now.
otonieru said:
What i did is to actually register the fingerprint of the edge area of my thumb as another finger. And i agree, it now detect my thumb faster
Click to expand...
Click to collapse
Cool, that's an awesome result, thanks for sharing :good:

Related

[Q] Face Recognition

what happened to the face recognition as an unlock method ?
i thought the SGS2 had it or did i dream that ?
mrdo said:
.... did i dream that ?
Click to expand...
Click to collapse
No dream mate, there was an english review with a girl showing the facerecognition unlock. I haven't received the phone yet, but it should be a setting under the security tab..
afraid not pal...see attached screen shot :-(
would have been cool though!
mrdo said:
what happened to the face recognition as an unlock method ?
i thought the SGS2 had it or did i dream that ?
Click to expand...
Click to collapse
Yup, the first demo video showed it. I guess it has been removed for security reasons (face recognition isn't really secure). Can't find it in settings here.
I heard it was vulnerable to the good old attack of "hold photo up to camera".
Too much of a gimmick if you ask me tbh.
i would prefer to decide myself if something is secure or not though ...
it seems a bit strange to have a piece of functionality working and then ditch it - gimmicks are an integral part of the sales process. i quite like going through the process of thinking something is cool and incredibly useful only to realise that it's completely pointless after i've used it a couple of times ...
disappointed - perhaps the facial recognition code would have added a few mm to the thickness of the phone like the NFC hardware ...
Eddiemc said:
No dream mate, there was an english review with a girl showing the facerecognition unlock. I haven't received the phone yet, but it should be a setting under the security tab..
Click to expand...
Click to collapse
It's not there. It's just the three standard options: Password, PIN or unlock pattern.
Edit: Late
FPRobber said:
It's not there. It's just the three standard options: Password, PIN or unlock pattern.
Edit: Late
Click to expand...
Click to collapse
Right, this is what there, nothing else. Samsung just a cheated cows. made peoples go crazy by showing what coming soon eg, NFC CHIPS & FACE SECURITY, then half the features is gone missing. What a con cows
pulser_g2 said:
I heard it was vulnerable to the good old attack of "hold photo up to camera".
Too much of a gimmick if you ask me tbh.
Click to expand...
Click to collapse
Well to be honest that was my theory in the forums
I still think it hold up though.

[Q] NFC on locked phone?

Is there soulution? I simply want to use registered NFC tags in situations, when i cannot use phone normally...
I'm so with you on that one...
Gesendet von meinem GT-I9300 mit Tapatalk 2
nobody who could help here?
Should work no problem. I wrote a couple tags and my buddy was able to read them on his locked GNex. Unless I totally misunderstood what your asking
sent from my GummyROM'd Prime
hehe... yeah, it was possible before but i think they changed it starting with ICS, and thats the problem
flolee said:
hehe... yeah, it was possible before but i think they changed it starting with ICS, and thats the problem
Click to expand...
Click to collapse
Just 4.0.2 and earlier. I believe 4.0.4 is all gravy!
sent from my Galaxy S III
thx man, hmm... now that's weird, i'm on 4.0.4 (the omega rom) and with the S3 there is no chance to read a tag if the device is locked
can somebody confirm this? maybe i should consider a full wipe then
flolee said:
thx man, hmm... now that's weird, i'm on 4.0.4 (the omega rom) and with the S3 there is no chance to read a tag if the device is locked
can somebody confirm this? maybe i should consider a full wipe then
Click to expand...
Click to collapse
Well I'm unlocked so I can't confirm that its a lock issue It very well could be but I have no idea how that works. .. full wipes don't hurt. Just sucks setting everything up again is all.
sent from my Galaxy S III
Coreym said:
Well I'm unlocked so I can't confirm that its a lock issue It very well could be but I have no idea how that works. .. full wipes don't hurt. Just sucks setting everything up again is all.
sent from my Galaxy S III
Click to expand...
Click to collapse
I think op means when the screen lock is on.. Not rooting or sim locked
The phone wont read a tag until the phone is turned on and screen unlocked
I guess its to save power
Do you maybe have a lock pattern or something similar enabled, would make sense to me if it doesn't work with such a feature activated.
Because with the swype to unlock you are i.e. also able to pull notifications down while the screen is locked, with a security lock activated you aren't.
Gesendet von meinem GT-I9300 mit Tapatalk 2
In my case I just have the swipe to unlock
But until unlocked you can not scan nfc
Sent from my GT-I9300 using xda premium
Thx guys for all your answers.
Of course the problem is the locked screen and not any sim lock.
I understand that it does kinda make sense not to accept NFC connections as long as the phone is locked. However, personally I would still prefer to use NFC also if the phone is locked (as it was possible before) - and i think I'm not alone with this.
Looks like you have to play around with your rom to get it working again - the sad part is, I have no clue where to start (well, actually I have no clue at all).
Gesendet von meinem GT-I9300 mit Tapatalk 2
searley said:
I think op means when the screen lock is on.. Not rooting or sim locked
The phone wont read a tag until the phone is turned on and screen unlocked
I guess its to save power
Click to expand...
Click to collapse
Ahh.. yeah that makes more sense lol sometimes I overlook the simplist of ****!
sent from my Galaxy S III
one more doubt with NFC unlock
I've one doubt regarding NFC screen unlock.. I'm worried that I'm giving more pressure to my Nexus S power button . Suppose if I can have a NFC tag which will simply light up the screen when placed on it, On my screen I can have pattern lock /password lock.. so it will be secured, I just want to bypass pressing Power button all the time to check what is happening inside my mobile ( with out rooting and key remap )
I understand why NFC is disabled when locked from a security perspective, especially with things like Google Wallet - someone could buy things with your phone without knowing the PIN.
However I am not using NFC payments and would really like to have the ability to switch profiles by NFC tags. The problem is the convenience of this is somewhat reduced by having to unlock the phone. If it could just be enabled when the screen is on that would not be so bad on the battery.
I know a few months back Paul O'Brien was talking about looking at a hack for this, I don't think he has yet (or will ever have the time). It is not on the new GNex MoDaCo kitchen (IR14). N.B. I did have a GNex before swapping for the wife's new S3
Take a look at the development section, there is already a solution for rooted phones.
Gesendet von meinem GT-I9300 mit Tapatalk 2
flolee said:
Take a look at the development section, there is already a solution for rooted phones.
Gesendet von meinem GT-I9300 mit Tapatalk 2
Click to expand...
Click to collapse
There wasn't when this thread was created I don't think
sent from my Galaxy S III
true, the solution is only a few days old - but this was just an information for TwoGunTurtle and all the others in this thread, who have not yet seen the thread in the development section.
You are looking at about 5 milliamps when the NFC is ready to read.
Whilst it's a only a very small drain if you had it drawing that all the time, you may find your battery starts to suffer. That's about 400 Hours on the 2100 mAH battery, assuming nothing else is drawing power.
Although I worked it out at only an extra 9 ish hours off the standby time assuming the phone does 200 Hours in stanby @ 10.5mA + 5mA for the NFC chip = 11mA - 2100mAh / 11mA = 190.90 Hours
So not a great loss, but you also have security to think of I guess, if your phone is always able to communicate via NFC you open yourself up to fly-by attacks (not that this kind of thing happens....yet).
Logicalstep

Can i root if so how?

I have an LGUS992. Thanks
Not yet.
Why not? Does lg not let you unlock the bootloader?
Sent from my LGUS992 using Tapatalk
Does lg is gay
Skyler7381 said:
Why not? Does lg not let you unlock the bootloader?
Click to expand...
Click to collapse
It was repeated all over in the G5 section, the only unlockable version is the european H850.
Also the H830 has root and twrp, but these are the only two models.
Thats dumb.
Sent from my LGUS992 using Tapatalk
One has to realize that the developers who courageously "get root" for us do so on their own time. Not only that, on their own dime as well. In the trial and error process of unlocking the bootloader the risk of nuking their devices is high (and quite a few developers have nuked this model and others). And they go and buy another, so they can continue development. This gets very expensive.
And most importantly, with devices like the G5 - it takes time.
So while it's easy for one to respond "that's dumb", etc - I guess the above points are completely disregarded. Or perhaps not even known in the first place.
Most importantly, we are at the will of the developers. If they feel they are being disrespected, amongst other things - it would not be unreasonable for them to halt development. Please keep all of this in mind.
cigman said:
One has to realize that the developers who courageously "get root" for us do so on their own time. Not only that, on their own dime as well. In the trial and error process of unlocking the bootloader the risk of nuking their devices is high (and quite a few developers have nuked this model and others). And they go and buy another, so they can continue development. This gets very expensive.
And most importantly, with devices like the G5 - it takes time.
So while it's easy for one to respond "that's dumb", etc - I guess the above points are completely disregarded. Or perhaps not even known in the first place.
Most importantly, we are at the will of the developers. If they feel they are being disrespected, amongst other things - it would not be unreasonable for them to halt development. Please keep all of this in mind.
Click to expand...
Click to collapse
I understand all that they go through and are doing and i appreciate it, i meant no disrespect. Im just saying its dumb that lg doesnt let you unlock the bootloader. I came from a moto x 2014 and all i had to do to unlock the bootloader was sign up on a website and do some other stuff.
ExtraDan said:
Does lg is gay
Click to expand...
Click to collapse
Its the most talked about in the social media in the few years ago!
At this point, the h830 and h850 are the only models that can be rooted due to being able to unlock the bootloader.
Hey guys, just one question for those of you who already have root. Didn't want to open a new thread.
When using Nova launcher, are you able to unlock the phone without it requesting a pin to be entered?
I really need this answer, going nuts with a stock launcher
Sent from my LG-H850 using Tapatalk
aca89 said:
Hey guys, just one question for those of you who already have root. Didn't want to open a new thread.
When using Nova launcher, are you able to unlock the phone without it requesting a pin to be entered?
I really need this answer, going nuts with a stock launcher
Sent from my LG-H850 using Tapatalk
Click to expand...
Click to collapse
Under Lockscreen I selected "None" and never have to enter a pin - I do use Nova, but I'd assume it would be the same with any launcher? Unless I'm completely missing the point here :laugh:
Nimueh said:
Under Lockscreen I selected "None" and never have to enter a pin - I do use Nova, but I'd assume it would be the same with any launcher? Unless I'm completely missing the point here [emoji23]
Click to expand...
Click to collapse
First of all thank you for responding
Well the point is, with LG stock launcher you can set up pin protection but it works in conjunction with the fingerprint reader meaning that when you unlock the screen with fingerprint phone is not asking for a pin entry. You are however able to double tap to power the screen and then enter pin to unlock if for some reason you do not want to use reader.
Let me ask again Are you able to do mentioned above with Nova and root? Can you maybe test for me
Sent from my LG-H850 using Tapatalk
aca89 said:
First of all thank you for responding
Well the point is, with LG stock launcher you can set up pin protection but it works in conjunction with the fingerprint reader meaning that when you unlock the screen with fingerprint phone is not asking for a pin entry. You are however able to double tap to power the screen and then enter pin to unlock if for some reason you do not want to use reader.
Let me ask again Are you able to do mentioned above with Nova and root? Can you maybe test for me
Sent from my LG-H850 using Tapatalk
Click to expand...
Click to collapse
Good grief, what a pain to set that up :laugh:
Sometimes I can unlock it by just touching it with the finger I set up, but other times I get "Unable to use fingerprint" and have to use the pin. I'd say it's about 50/50
No idea why it sometimes works and other times doesn't, but I'm removing the lock again now ... way too much hassle
Nimueh said:
Good grief, what a pain to set that up [emoji23]
Sometimes I can unlock it by just touching it with the finger I set up, but other times I get "Unable to use fingerprint" and have to use the pin. I'd say it's about 50/50
No idea why it sometimes works and other times doesn't, but I'm removing the lock again now ... way too much hassle
Click to expand...
Click to collapse
Haha, thank you again for a quick response [emoji2] It is a bit of a pain.
I guess I'll just root and see how it goes.
Have a nice day, cheers mate!
Sent from my LG-H850 using Tapatalk
If I root my device will I stop receiving OTA updates?
aca89 said:
Haha, thank you again for a quick response [emoji2] It is a bit of a pain.
I guess I'll just root and see how it goes.
Have a nice day, cheers mate!
Sent from my LG-H850 using Tapatalk
Click to expand...
Click to collapse
Hey man, I'm also using Nova Launcher on my LG G5 H860 (no root tho - obviously - woe is me!), and I use the finger print scanner AND a pattern. I think LG suspect that the fingerprint scanner alone is not enough security, so they make us use a pattern or pin on top of that. At least that's my guess since I was immediately prompted to add the pin, password or pattern after setting up my fingerprints. Also, upon rebooting, EVERY TIME I have to put in my pattern. The fingerprint alone is not enough to gain access.
I'm guessing it would depend on the ROM you use, not particularly the launcher. But let us know how you go... Have you rooted yet?
Nice avatar BTW. \m/
invertedskull said:
Hey man, I'm also using Nova Launcher on my LG G5 H860 (no root tho - obviously - woe is me!), and I use the finger print scanner AND a pattern. I think LG suspect that the fingerprint scanner alone is not enough security, so they make us use a pattern or pin on top of that. At least that's my guess since I was immediately prompted to add the pin, password or pattern after setting up my fingerprints. Also, upon rebooting, EVERY TIME I have to put in my pattern. The fingerprint alone is not enough to gain access.
I'm guessing it would depend on the ROM you use, not particularly the launcher. But let us know how you go... Have you rooted yet?
Nice avatar BTW. \m/
Click to expand...
Click to collapse
It's actually a backup option I think, in case when fingerprint reader fails. Makes sense
System is not letting other apps take control over the phone even though they are listed as device administrators. It's a new security measure introduced with MM.
Of course everything changes when you have root privileges
I've rooted the phone yesterday. Nova can now unlock the phone with just a fingerprint. Also installed the Viper audio mod and deleted a few system apps.
Right now I'm investigating how to prolong the super brightness mode so it can last longer than lousy two minutes
Glad to hear someone appreciates the sound of perseverance \m/ \m/
Keep rocking brother
Sent from my LG-H850 using Tapatalk
aca89 said:
It's actually a backup option I think, in case when fingerprint reader fails. Makes sense
System is not letting other apps take control over the phone even though they are listed as device administrators. It's a new security measure introduced with MM.
Of course everything changes when you have root privileges
I've rooted the phone yesterday. Nova can now unlock the phone with just a fingerprint. Also installed the Viper audio mod and deleted a few system apps.
Right now I'm investigating how to prolong the super brightness mode so it can last longer than lousy two minutes
Glad to hear someone appreciates the sound of perseverance \m/ \m/
Keep rocking brother
Sent from my LG-H850 using Tapatalk
Click to expand...
Click to collapse
The PIN is, just as you said, a backup security measure. If you're rooted you can go and download a fingerprint add on through Xposed.. that means Only your fingerprint is needed to unlock your device.
"Fingerprint Enabler" ?
aca89 said:
It's actually a backup option I think, in case when fingerprint reader fails. Makes sense
System is not letting other apps take control over the phone even though they are listed as device administrators. It's a new security measure introduced with MM.
Of course everything changes when you have root privileges
I've rooted the phone yesterday. Nova can now unlock the phone with just a fingerprint. Also installed the Viper audio mod and deleted a few system apps.
Right now I'm investigating how to prolong the super brightness mode so it can last longer than lousy two minutes
Glad to hear someone appreciates the sound of perseverance \m/ \m/
Keep rocking brother
Sent from my LG-H850 using Tapatalk
Click to expand...
Click to collapse
Don't have G5 so I can't test or even know if what I'm saying is correct, but I was looking through the G5 git tree and saw the super brightness mode seems to be called HL_MODE standing for LGE_HIGH_LUMINANCE_MODE, there's referenced to it in the code, you could probably edit it there then compile and it will most likely work, however it seems it's also with references to the kernel so you probably gonna have to edit both the kernel and ROM simultaneously to make things easier...
raynan said:
its the most talked about in the social media in the few years ago!
At this point, the h830 and h850 are the only models that can be rooted due to being able to unlock the bootloader.
Click to expand...
Click to collapse
Lmaooo

How can I make screen more sensitive?

Does anyone have the problem where scrolling isnsiepr fast and scrolling is also only nice when their finger in flat on the screen and morning an angle? When I use my left thumb, in an angle it sometimes doesn't scroll proeprly and instead moves very little. It's very annoying.
Yes i have this. It's caused by input lag very high on this Phone !
Yes its horrible..Can not understand that they sell it with such issues and call it master of speed.
Will send it Back in monday
LOL
another fake topic
Why Fake?
This is happening with me 2. Is it hardware issue? Or should I replace it?
Bad news http://en.miui.com/thread-3746297-1-1.html this smartphone is very bad !
I can use this phone through gloves.
I've kind of made the problem go away. Idk if it's a placebo and I've gotten used to it. But I'll end the thread and start another one to state what I've done. You can give me feedback there.
bronze900 said:
I've kind of made the problem go away. Idk if it's a placebo and I've gotten used to it. But I'll end the thread and start another one to state what I've done. You can give me feedback there.
Click to expand...
Click to collapse
I also have the exact problem. The phone suddenly stops responding to some of the touches be it tap or swipe. Then after sometime it responds to all of the touches. How did you fix it?
Sent from my POCO F1 using Tapatalk
dbzgoku said:
I also have the exact problem. The phone suddenly stops responding to some of the touches be it tap or swipe. Then after sometime it responds to all of the touches. How did you fix it?
Click to expand...
Click to collapse
I didn't have something that extreme. But it seems better for me after I turned off mi optimisation in the developers options. Also go to extra settings and pick authorisation. I turned everything off and left settings. I'm about to root my phone as it has been nearly 3 days. There should be a fix in the Mi forums somewherem
I think I made a right decision to buy the Honor Play Player Edition instead of Poco F1, lots of complaints everywhere!
motherninja said:
I think I made a right decision to buy the Honor Play Player Edition instead of Poco F1, lots of complaints everywhere!
Click to expand...
Click to collapse
Noob?
I'm a lucky noob... Sorry you got tricked by xiaomi...
yea too many bugs, i am facing this issue as well, touch is really bad, there are times( i may be wrong) but the screen responds even when i hover my finger on it, it has happened quite a few times now
motherninja said:
I'm a lucky noob... Sorry you got tricked by xiaomi...
Click to expand...
Click to collapse
Ermmm maybe you got trick by honor cheating benchmarks
motherninja said:
I think I made a right decision to buy the Honor Play Player Edition instead of Poco F1, lots of complaints everywhere!
Click to expand...
Click to collapse
LOL I have the global version here in Italy and the phone is PERFECT. No one complaints about it. You can check. It's a great phone. Here are all happy about Poco.
nISTHUR said:
yea too many bugs, i am facing this issue as well, touch is really bad, there are times( i may be wrong) but the screen responds even when i hover my finger on it, it has happened quite a few times now
Click to expand...
Click to collapse
Yes. For me it's a functionality rather than a bug. It allows me to use the screen even with gloves on. Also the response will normalise if you install a tempered glass.
lockhrt999 said:
Yes. For me it's a functionality rather than a bug. It allows me to use the screen even with gloves on. Also the response will normalise if you install a tempered glass.
Click to expand...
Click to collapse
I installed tempered glass from the 1st day and getting touch issues. I thought it is software bug. Like, if I swipe left or right and it works as swipe up or down.
Mi post about their miui 10 beta 2, their is written that ghost and multi touch problem will be solved. If miui beta 2 solved these issues then I will install it manually. https://en.miui.com/thread-3935216-1-1.html
I post about the touch issues to poco India in twitter and they replied me to DM to us with contact number and miui version of my device, our team will call you.
Lets see, will they call or not.
maxmog said:
Yes its horrible..Can not understand that they sell it with such issues and call it master of speed.
Will send it Back in monday
Click to expand...
Click to collapse
Try miui 10 it doesn't need anything
Not even a bootloader unlocking just download and flash

[FIX] Fingerprint Unlock in all Custom Roms

Just like everyone else, I, myself had a very terrible problem about custom roms unable to unlock my phone despite successful registration of my fingerprint under settings.
Here's how I was able to resolved it and this is tried and tested to be working in RR and Mokee rom.
See pictures below. Make sure to register your finger in different positions.
1. Default - thumb pointing upward.
2. Thumb facing the left side.
3. Thumb facing the right side.
4. Thumb facing downward. - this I wasn't able to grab picture of but I'm sure you got the idea.
Also, use the part of your thumb as circled below and make sure to use the same thumb for all registration.
Let me know if it worked for you and which rom.
Cheers!
Update: Tried this on PE and confirmed working.
你他娘的真是个人才,这都能让你研究出来!!
You are really a genius!!!
Works on Mokee Rom, thank you, brilliant!
cyhulk said:
你他娘的真是个人才,这都能让你研究出来!!
You are really a genius!!!
Click to expand...
Click to collapse
SozzR said:
Works on Mokee Rom, thank you, brilliant!
Click to expand...
Click to collapse
I'm glad it worked for you both. Please spare the word. There is no such thing as a non-working fingerprint scanner in customs rom. It works for all roms we just need to register our fingers the proper way.
Cheeers!
Hmm, tried on Pixel Experience ROM with no luck "/
Chr0m3Chaos said:
Hmm, tried on Pixel Experience ROM with no luck "/
Click to expand...
Click to collapse
EDIT: Just realized you said to add MULTIPLE fingerprints in different orientations. I was just doing one fingerprint, but changing the orientation lol. Thank you! It does indeed work!
Chr0m3Chaos said:
EDIT: Just realized you said to add MULTIPLE fingerprints in different orientations. I was just doing one fingerprint, but changing the orientation lol. Thank you! It does indeed work!
Click to expand...
Click to collapse
Sweet!
this shouldn't work by any right. but it does.
Mi 9T running Havoc OS GSI 2.7.
thanks a lot...
Le Vagabond said:
this shouldn't work by any right. but it does.
Mi 9T running Havoc OS GSI 2.7.
thanks a lot...
Click to expand...
Click to collapse
Wow! It's nice to know it worked on Mi 9T.
melmarPH said:
Just like everyone else, I, myself had a very terrible problem about custom roms unable to unlock my phone despite successful registration of my fingerprint under settings.
Here's how I was able to resolved it and this is tried and tested to be working in RR and Mokee rom.
See pictures below. Make sure to register your finger in different positions.
1. Default - thumb pointing upward.
2. Thumb facing the left side.
3. Thumb facing the right side.
4. Thumb facing downward. - this I wasn't able to grab picture of but I'm sure you got the idea.
Also, use the part of your thumb as circled below and make sure to use the same thumb for all registration.
Let me know if it worked for you and which rom.
Cheers!
Click to expand...
Click to collapse
Tried registering 4 different fingers in different orientations like you suggested. Didn't work.. Might be doing something wrong. Even tried the same finger in different orientations.
Using pixel experience.
aman2125 said:
Tried registering 4 different fingers in different orientations like you suggested. Didn't work.. Might be doing something wrong. Even tried the same finger in different orientations.
Using pixel experience.
Click to expand...
Click to collapse
You have to do it with THE SAME finger all the time.
aman2125 said:
Tried registering 4 different fingers in different orientations like you suggested. Didn't work.. Might be doing something wrong. Even tried the same finger in different orientations.
Using pixel experience.
Click to expand...
Click to collapse
You have tried everything but the mentioned method.
Try registering your finger(any) facing upwards first through out the entire registration process.
Then add a new fingerprint again with the same finger used previously but this time pointing left through out the entire process.
Repeat for remaining two directions(right & downwards) for this same finger.
Enjoy.
Good luck again.
AlphaKilo09 said:
You have tried everything but the mentioned method.
Try registering your finger(any) facing upwards first through out the entire registration process.
Then add a new fingerprint again with the same finger used previously but this time pointing left through out the entire process.
Repeat for remaining two directions(right & downwards) for this same finger.
Enjoy.
Good luck again.
Click to expand...
Click to collapse
Flashed HAVOC in the meantime.. didn't require anything.. just registered normally and good to go!
aman2125 said:
Flashed HAVOC in the meantime.. didn't require anything.. just registered normally and good to go!
Click to expand...
Click to collapse
Welldone friend!
Can fingerprint unlocking have vibration ?
Did not work for me
On HAVOC 2.8
shamllakh said:
Did not work for me
On HAVOC 2.8
Click to expand...
Click to collapse
I am also on Havoc 2.8 but it doesn't work for me ?. Very strange.
Hey guys,
The 9T pro is my first Ever fingerprint device.
So can someone explain me why there are issues with customroms and the fingerprint Scanner?
There is another variable that seems to affect this device in particular: humidity.
I've noticed that the fingerprint reader behaves differently if your finger is dry or wet.
This will sound stupid but if you want the best performance of the fingerprint reader, try doing the above method, but make sure you register once when your finger is very dry, and once when it is more wet. This will make sure your fp reader will work at its best in every scenario. This is the way I made the fingerprint reader work like this in PE+:
https://imgur.com/HBw2Uj8

Categories

Resources