Related
Hey yall I just wanted to start a discussion thread for T-Mobile like me who are braving T-Mobile's refarmed network and using the HTC One X+ (International or unlocked AT&T variant). Maybe we can get a few tips and tricks together to make our user experience a bit better.
For example, such radios yall are using, any build.prop edits that might help data speeds or GPS locking speed (if you are using the international version like I am).
Ill update the OP with the list of suggestions, maybe an FAQ.
I've been using the Phone Info app to turn off the LTE radio, although I'm not entirely sure that is does. I use the GSM auto mode which is the default on 3G non LTE phones. The default on the One X+ is GSM/WCDMA/LTE
Is anyone experiencing weak or wavering 3G signal (over PCS) as discussed toward the end of this thread (scroll down about halfway on page three)?
http://forums.tmonews.com/index.php?topic=18318.40
The very knowledgeable posters there say that T-Mobile is using less power on PCS (WCDMA), as compared to AWS, right now. And probably won't turn it up until they start shifting AWS to LTE.
cb474 said:
Is anyone experiencing weak or wavering 3G signal (over PCS) as discussed toward the end of this thread (scroll down about halfway on page three)?
http://forums.tmonews.com/index.php?topic=18318.40
The very knowledgeable posters there say that T-Mobile is using less power on PCS (WCDMA), as compared to AWS, right now. And probably won't turn it up until they start shifting AWS to LTE.
Click to expand...
Click to collapse
Definitely especially indoors. I get full bars of PCS where available, but indoors I'm switching between 3G/"4G" and Edge.
rashad1 said:
Definitely especially indoors. I get full bars of PCS where available, but indoors I'm switching between 3G/"4G" and Edge.
Click to expand...
Click to collapse
Do you have a phone with AWS 3G to compare in the same location and see if it has better 3G reception?
cb474 said:
Do you have a phone with AWS 3G to compare in the same location and see if it has better 3G reception?
Click to expand...
Click to collapse
Yep, my Nexus 4 gets constant HSPA+ where I get spotty PCS
I have a question for you guys that are using the HOX+ on T-mobile.
What type of sim card are you using?
I know that on the original HTC One X, you had to use a non-gba sim card that said 50.01 on the front to make it work, and that if you used the one that said 50.05 you wouldn't get data even if you change the APN settings.
I just bought this phone a few minutes ago on Amazon and I know Houston is a 1900MHZ pcs market so that's not an issue, i just want to make sure I don't run into any issues with the sim card I have as it is fairly new.
jd317 said:
I have a question for you guys that are using the HOX+ on T-mobile.
What type of sim card are you using?
I know that on the original HTC One X, you had to use a non-gba sim card that said 50.01 on the front to make it work, and that if you used the one that said 50.05 you wouldn't get data even if you change the APN settings.
I just bought this phone a few minutes ago on Amazon and I know Houston is a 1900MHZ pcs market so that's not an issue, i just want to make sure I don't run into any issues with the sim card I have as it is fairly new.
Click to expand...
Click to collapse
Well I cut my sim from a regular SIM card so there aren't really numbers on it. I think you'll be safer with a newer one than an older one so you're fine.
Also located in Houston and getting pretty good 3G
I tried to sign up over at tmonews forums and registration for new users is closed. Anybody have any insight as to when that will reopen?
I believe one of the reasons TMO has to go with lower power at first is to measure the impact of their new 1900mhz spectrum usage in the existing market in question. Since other carriers are using the same spectrum they need to make sure they do not cause interference. The best way to do that is short and long term RF studies. Start off with a refarmed freq at lower power then over time bump up the power and make sure it doesnt cause any new interference. If so then your able to go to a higher power. Im sure the FCC has time constraints for this but add into it the amount of towers im sure the carrier would rather accomplish more with each visit. So if an upgrade or tweek is needed then they can also adjust the power.
Forgot to add i recently acquired the ATT version of the HTC ONE X+ 64GB and it does ok in the Dallas area. Had it switch a few times to G and E but for the most part i stays on 4G. HSPA+21.6 DL speeds go between 2megs down and 9 megs down.
Prior to that i was using a Nexus 4 and TMO GS3. I seem to have better speeds with my GS3.
IAmSixNine said:
I tried to sign up over at tmonews forums and registration for new users is closed. Anybody have any insight as to when that will reopen?
Click to expand...
Click to collapse
The forums have been like that for a while (at least months). Don't know why. Perhaps you can email the person who writes the blog and ask about it.
I live in the Orlando area, I am on Straight Talk. I was using an at&t compatible SIM from straight talk and got up to 7mb down and 1.5mb up but these speeds were not consistent, a few days ago I switched to a t -mobile compatible SIM from straight talk and now I get consistent 12mb down and 3mb up. I was very surprised! I'm so glad I did this switch
I am using an at&t 1X+ which I unlocked.
Sent from my HTC One X+
unlock sim
All, nice threat. just got this phone and unlocked the bootloader today. how can i unlock the simcard to use on tmo? i know we have LTE here and I am dying to see what kind of speeds i can get on this phone. thanks all
Thread closed.
Off topic discussion threads are not allowed
I attempted to do my homework on device compatibility beforehand so as to avoid the shock of something like being stuck on EDGE for data. Nevertheless even with a video review showing the DNA operating HSPA+ on Solavei I am stuck on dreaded EDGE. The activation period took a couple of hours with my new phone (DNA) being able to dial out but SMS/MMS non functional as well as calls to my handset. EDGE was running during this time but after a bit I saw it flash to 3G then H.....success! NOPE. At this point I verified SMS and all calls were working and my phone seemed to want to connect to HSPA+ but was having network communication issues when trying to run speed tests. I attributed all this to my home location, it having always with any carrier been quite on the outskirts of general coverage even though I'm only 1/4 mile from town which is a bit ludicrous in itself. Later that night I drove a little into town to test the data and alas H+ lit up, ran a speed test 2.5MB download...not to shabby IMO. Next day I drive to work and into the center of my home area where the best coverage is for ANY carrier and the entire trip H+ only lit up for a few seconds. Ever since there is no change in data always on E. I called Solavei and told them the issue and they pretty much gave me the runaround and couldn't definitively explain why it worked for a short period but wouldn't now. I can't 100% confirm that T-Mobile has refarmed the area to 1900Mhz but I read my city in a list of 49 in an article that said they were done. This being said I'm forced to let this month play out until possibly switching carrier perhaps one that uses AT&T instead. I asked Straight Talk about my device and they said they offer SIMs for both AT&T and T-Mobile but AT&T is limited to 3G service only whilst T-Mobile should work for HSPA+. I don't know if this a T-Mobile issue or a Solavei one or it's just my phone, but don't see how it could be the phone since it was up and running briefly.
I use T-Mobile and my connection is all over the place at times, refarming is actually the reason I think, its going for the strongest signal, if its edge, it gets edge towers, until the refarm is done I think we'll continue to see this kind of behavior for awhile. As time has gone by its gotten better around here with less time on edge and more on 3g/h+ since I first got the phone.
I can't vouch for at&t but no h+ sounds a little strange to me, if anything bands wise they should be more compatible then T-Mobile.
Tapatalked from my HTC DNA - Carbon
pio_masaki said:
I use T-Mobile and my connection is all over the place at times, refarming is actually the reason I think, its going for the strongest signal, if its edge, it gets edge towers, until the refarm is done I think we'll continue to see this kind of behavior for awhile. As time has gone by its gotten better around here with less time on edge and more on 3g/h+ since I first got the phone.
I can't vouch for at&t but no h+ sounds a little strange to me, if anything bands wise they should be more compatible then T-Mobile.
Tapatalked from my HTC DNA - Carbon
Click to expand...
Click to collapse
It sounds like the refarm is much more of a gradual process than a one and done. At least I hope so or else there's not much to look forward to there. I know the Solavei rep was full of complete and utter BS since she told my phone was incompatible since it wasn't on their database of phones to service APN settings OTA. I may try out Straight Talk or Net10 just to see how the AT&T network speed performs.
Sorry for my ignorance, does the DNA really get H+ (42Mbs) ? On GSM network?
Thanks
trungbeo said:
Sorry for my ignorance, does the DNA really get H+ (42Mbs) ? On GSM network?
Thanks
Click to expand...
Click to collapse
No reason it can't, hardware supports it if you have the connection to do it. In my coverage I'm usually edge or 3g so I can't say for sure.
Tapatalked from my HTC DNA - Carbon
I ended up leaving solavei (T-Mobile) for net10 (at&t) The coverage is worlds apart in terms of hspa. I get it everywhere though the speeds fluctuate but are decent. T-Mobile definitely needs to expand coverage it was not good where I lived about 80% was edge.
I have issues getting good signal with my m8 on at&t, anyone else ? Actually I"am on straight talk which uses at&t service.
Not sure if the bad signal is just my area or if its my phone.
I can get LTE when I"am out and about, and it shows good signal, but my data speeds are not really that great for LTE being maybe 8 to 15 mbps yeah its good but should be more according to most users.
I live in Ohio and have absolutely no signal indoors and if I go out to the road I can pick up some weak edge signal which is like scraping the bottom of the barrel as far as data.
I have heard from people at a local at&t store that at&t took over the last of the alltel towers and something about July, but no one seems to be able to tell me anything about my area, and at&t maps show I"am supposed to have good service here so I dont know if its their service or my phone.
And being on straight talk its not like they will be able to help me with signal issues as you might as well be talking to yourself than call their customer service, as they cant even help you with how to set up call forwarding as they say its not listed as a feature with straight talk, pretty sad yes lol.
Does anyone work for at&t that can tell me if I will be getting alltel towers working in my area ?
In Ohio from zip 44830 Fostoria starting a few miles north going out of town on state route 199 basically all the way to state route 6 there is basically no service on my m8 as all I show is edge this is like a 10 to 15 mile stretch of nothing. Now if you turn west on state route 6 then you get a little better then a few miles you get LTE coverage.
Hoping someone from at&t can clue me in on this area because my m8 just sucks for service and I"am supposed to have good coverage here according to the at&t coverage maps.
Here in northern Delaware. Get LTE everywhere..they activated the tower near my house and I even get LTE there as well..solid 20mbps down
Sent from my HTC One_M8 using XDA Free mobile app
Roefastford said:
I have issues getting good signal with my m8 on at&t, anyone else ? Actually I"am on straight talk which uses at&t service.
Not sure if the bad signal is just my area or if its my phone.
I can get LTE when I"am out and about, and it shows good signal, but my data speeds are not really that great for LTE being maybe 8 to 15 mbps yeah its good but should be more according to most users.
I live in Ohio and have absolutely no signal indoors and if I go out to the road I can pick up some weak edge signal which is like scraping the bottom of the barrel as far as data.
I have heard from people at a local at&t store that at&t took over the last of the alltel towers and something about July, but no one seems to be able to tell me anything about my area, and at&t maps show I"am supposed to have good service here so I dont know if its their service or my phone.
And being on straight talk its not like they will be able to help me with signal issues as you might as well be talking to yourself than call their customer service, as they cant even help you with how to set up call forwarding as they say its not listed as a feature with straight talk, pretty sad yes lol.
Does anyone work for at&t that can tell me if I will be getting alltel towers working in my area ?
In Ohio from zip 44830 Fostoria starting a few miles north going out of town on state route 199 basically all the way to state route 6 there is basically no service on my m8 as all I show is edge this is like a 10 to 15 mile stretch of nothing. Now if you turn west on state route 6 then you get a little better then a few miles you get LTE coverage.
Hoping someone from at&t can clue me in on this area because my m8 just sucks for service and I"am supposed to have good coverage here according to the at&t coverage maps.
Click to expand...
Click to collapse
Have you used more than 2.5Gb of data? Probably not, since they throttle you to 2G/Edge once you do & you'd sure notice that slow down much more. It may very well be a QOS prioritization for AT&T post paid accounts. If it is a big AT&T area, you may be getting second tier LTE, as opposed to high priority service.
What is the exact APN you are using? att mvno or the proxy mvno?
GSLEON3 said:
Have you used more than 2.5Gb of data? Probably not, since they throttle you to 2G/Edge once you do & you'd sure notice that slow down much more. It may very well be a QOS prioritization for AT&T post paid accounts. If it is a big AT&T area, you may be getting second tier LTE, as opposed to high priority service.
What is the exact APN you are using? att mvno or the proxy mvno?
Click to expand...
Click to collapse
Oh no I have used maybe 100 mb's this month at the most and I have never even used a gb ever, as I use wifi from home most of the time.
Yes they could be giving me a slower LTE speed, possibly so that could be the reason on LTE.
But the no service here would not be because of that, must either be their weak towers or lack of towers here or my m8 ?
Oh forgot you asked which apn I was using. I have tried the one for straight talk and one for at&t mvno see the screen shots that I added a few posts after this one.
Mine works great on at&t. Lte everywhere here in Atlanta. 20-70mbs downstream. Comparing with old phones, Signal is about the same as my gs4, a little bit better than my m7, and it is WAY better than my nexus 5. Wifi on this phone is the best I have ever seen. Works out in my yard while mowing the grass.
Roefastford said:
Oh no I have used maybe 100 mb's this month at the most and I have never even used a gb ever, as I use wifi from home most of the time.
Yes they could be giving me a slower LTE speed, possibly so that could be the reason on LTE.
But the no service here would not be because of that, must either be their weak towers or lack of towers here or my m8 ?
Click to expand...
Click to collapse
Oh forgot you asked which apn I was using. I have tried the one for straight talk and one for at&t mvno see the attached screen shots.
i only get around 5 mbps on data, in mi. my calls are great and i even tried flashing every radio, on m7 gpe i got 17 mbps. wtf?
Mine does great on signal, in fact it's as good, if not better than any phone I've had on AT&T. I'm in a very rural area too, Mendocino County in Northwestern California. Speaking of Delaware up there, our county is bigger than the entire state of DE by 1300 Square Miles
Our area's coverage map http://www.att.com/maps/wireless-coverage.html#fbid=LanXkOldn1H Just put in zip 95470, my zip in Redwood Valley.
Roefastford said:
I have issues getting good signal with my m8 on at&t, anyone else ? Actually I"am on straight talk which uses at&t service.
Not sure if the bad signal is just my area or if its my phone.
I can get LTE when I"am out and about, and it shows good signal, but my data speeds are not really that great for LTE being maybe 8 to 15 mbps yeah its good but should be more according to most users.
I live in Ohio and have absolutely no signal indoors and if I go out to the road I can pick up some weak edge signal which is like scraping the bottom of the barrel as far as data.
I have heard from people at a local at&t store that at&t took over the last of the alltel towers and something about July, but no one seems to be able to tell me anything about my area, and at&t maps show I"am supposed to have good service here so I dont know if its their service or my phone.
And being on straight talk its not like they will be able to help me with signal issues as you might as well be talking to yourself than call their customer service, as they cant even help you with how to set up call forwarding as they say its not listed as a feature with straight talk, pretty sad yes lol.
Does anyone work for at&t that can tell me if I will be getting alltel towers working in my area ?
In Ohio from zip 44830 Fostoria starting a few miles north going out of town on state route 199 basically all the way to state route 6 there is basically no service on my m8 as all I show is edge this is like a 10 to 15 mile stretch of nothing. Now if you turn west on state route 6 then you get a little better then a few miles you get LTE coverage.
Hoping someone from at&t can clue me in on this area because my m8 just sucks for service and I"am supposed to have good coverage here according to the at&t coverage maps.
Click to expand...
Click to collapse
I live in an area where I don't get very good signal as it is, and I've noticed that when I'm in an area that's already bad it seems to be a little worse then my Note 3 was, I am constantly having to re-start my phone because texts are failing, but if I'm in an area that has moderate to good coverage, its as good, if not better, then any phone I've had.
Slightly better than my old ONE X but still solid in Salt Lake Area.
I'm on AT&T in Los Angeles. I have the WWE edition on 4.4.3 (ARHD, 2.22.401.4 firmware}. My LTE speed is terrible. I'm averaging 5MB down. If I put my SIM into my Nexus 4, it gets 15 MB easy on 4G. I've tried switching radios, and switching to the US/Dev firmware (2.22.1540.3). I can't get more than 5MB no matter what. I wondering if it's because AT&T hasn't released the 4.4.3 update yet. Does that seem reasonable?
Sent from my Nexus 10 using Tapatalk
I have T-mobile and im close to buying this phone. My worry is how well will data work in my area? The specs are great for the price
I know i wont get LTE speeds.
Would I be able to get data inside buildings?
Anyone have experience with this phone on t-mobile? Or any other xiaomi/chinese phone
tlxxxsracer said:
I have T-mobile and im close to buying this phone. My worry is how well will data work in my area? The specs are great for the price
I know i wont get LTE speeds. Would I be able to get data inside buildings? Anyone have experience with this phone on t-mobile? Or any other xiaomi/chinese phone
Click to expand...
Click to collapse
Here are three links (sort of cheat sheets) with some information that will help:
http://androidforums.com/threads/how-to-tell-if-a-phone-will-work-on-t-mobile.706991/
http://www.prepaidphonenews.com/2014/09/what-phone-works-with-which-operator.html
http://www.droid-life.com/2015/02/05/us-wireless-carrier-bands-gsm-cdma-wcdma-lte-verizon-att-sprint-tmobile/
You should also check out http://www.willmyphonework.net/, and if you end up with the FDD + TDD LTE version, that helps reconfirm things will work because of the 1900 MHz coverage.
You asked specifically about getting data inside buildings. My understanding is that lower frequencies work better for indoor coverage because they can more easily pass through walls, but they do not have the best range. In turn, if you want better outdoor distance and range, then higher frequencies work better because they are less attenuated by the atmosphere. Somebody else more knowledgeable can comment on this. But in the long run, it will probably be about your local coverage, too. I.e. if you are generally close to cell towers, the indoor/outdoor factor might not make much of a difference. And if you can somehow manage wifi calling with T-Mobile, that might also minimize any potential issue.
I think wifi calling must be baked into the phone to use it, but I may be wrong about this.
Any US T-Mobile users that can confirm this either way?
I am waiting on a Prime model myself, and plan to use it with an AT&T mvno in the US. AT&T supposedly has 3G on both 850 and 1900 MHz so 3G should work no problem.
thanks for the response. Accoring to the willmyphonework site it will work on Tmobile with 3g.. So im guessing no HSPA or HSPA+ right? these bands/network/freq confuse me.
tlxxxsracer said:
thanks for the response. Accoring to the willmyphonework site it will work on Tmobile with 3g.. So im guessing no HSPA or HSPA+ right? these bands/network/freq confuse me.
Click to expand...
Click to collapse
This phone should work with T-Mobile 3G, and also what T-Mobile calls 4G, but which is actually HSPA+, and thus, by the book is on 3G. Take a look at the AndroidForums link I sent above. Supposing that information is true, it says the following:
3G
The technology for 3G is called UMTS. T-Mobile uses two frequencies for their UMTS network: 1900MHz and 1700/2100MHz. So if you check your phone's specifications and see that it has either 1900MHz or 1700/2100MHz listed as one of the UMTS frequencies, then it will support T-Mobile's 3G network.
4G - HSPA+
T-Mobile did a bit of marketing on this one. What T-Mobile calls 4G can more accurately be called HSPA+. This is not really a new technology, rather, it's an upgrade of the 3G technology UMTS. Therefore, if your phone supports the UMTS frequencies 1900MHz or 1700/2100MHz, then we just need to check to see if the phone supports HSPA (slower) or HSPA+ (faster). If it does, then it will be compatible with T-Mobile's 4G network.
Click to expand...
Click to collapse
The RN2 supports UMTS at 1900 MHz and HSPA+ so yes, you should be able to get HSPA+ service. HSPA+ is pretty speedy, and for my own use case, it is perfectly fine. Some people will want/need/demand LTE speeds (even though HSPA+ gets very close, and sometimes passes it...). But at least for my own use case, I don't plan to be downloading huge files, or streaming HD video when I am away from wifi coverage. So for me, data up to 3G/HSPA+ is fine. But you'll have to figure out if it is good enough for you.
verbage said:
This phone should work with T-Mobile 3G, and also what T-Mobile calls 4G, but which is actually HSPA+, and thus, by the book is on 3G. Take a look at the AndroidForums link I sent above. Supposing that information is true, it says the following:
The RN2 supports UMTS at 1900 MHz and HSPA+ so yes, you should be able to get HSPA+ service. HSPA+ is pretty speedy, and for my own use case, it is perfectly fine. Some people will want/need/demand LTE speeds (even though HSPA+ gets very close, and sometimes passes it...). But at least for my own use case, I don't plan to be downloading huge files, or streaming HD video when I am away from wifi coverage. So for me, data up to 3G/HSPA+ is fine. But you'll have to figure out if it is good enough for you.
Click to expand...
Click to collapse
This is good news thank you! I mostly stream music while driving or browse the web anyways..
Now to just sell my Samsung s6 to buy a RN2
tlxxxsracer said:
This is good news thank you! I mostly stream music while driving or browse the web anyways.. Now to just sell my Samsung s6 to buy a RN2
Click to expand...
Click to collapse
tlxxxsracer, I'm always nervous to suggest something I cannot back up with my own firsthand experience. According to the information I pointed out, it seems like the RN2 should be able to use T-Mobile 3G/HSPA+ service. But it would sure be nice to have an actual RN2 T-Mobile user out there confirm this. Are there any of you around?
Check out the Huawei ascend mate 7. It's a little more than the RN2, but is compatible with tmobile lte bands. I'm gonna purchase it here soon. Idk where u live, but I used tmobiles hspa, and got crappy service. Only like 5 down and .5 up. But switching to lte I'm getting like 45d and 8u. Huge difference lol.
HSPDA works on Tmobile
tlxxxsracer said:
I have T-mobile and im close to buying this phone. My worry is how well will data work in my area? The specs are great for the price
I know i wont get LTE speeds.
Would I be able to get data inside buildings?
Anyone have experience with this phone on t-mobile? Or any other xiaomi/chinese phone
Click to expand...
Click to collapse
I was waiting for my phone to reply on this topic. I had lots of doubts about this issue, and finally bought Redmi Note 2. In the NY/NJ area, i am able to get HSPDA+ similar to my Nexus 4 (previous phone).
jpkml said:
I was waiting for my phone to reply on this topic. I had lots of doubts about this issue, and finally bought Redmi Note 2. In the NY/NJ area, i am able to get HSPDA+ similar to my Nexus 4 (previous phone).
Click to expand...
Click to collapse
Thanks i also spoke with Tmobile store rep, and they said it will work and that i should get 4g (hspa+) and showed a map of exact coverage the the frequencies in my area.
Where did you buy yours from?
jpkml said:
I was waiting for my phone to reply on this topic. I had lots of doubts about this issue, and finally bought Redmi Note 2. In the NY/NJ area, i am able to get HSPDA+ similar to my Nexus 4 (previous phone).
Click to expand...
Click to collapse
Great, thanks for confirming this, jpkml!
tlxxxsracer said:
Thanks i also spoke with Tmobile store rep, and they said it will work and that i should get 4g (hspa+) and showed a map of exact coverage the the frequencies in my area.
Where did you buy yours from?
Click to expand...
Click to collapse
I got the Prime (32GB) version from merimobiles.com . The buying experience was good. If you plan on buying from them, signup for their emails, you get a $20 discount points. Create a new account and order via that account to get the status via their website. I forgot to do both these steps, and had to ping them everyday (5-6am EST ) to followup on my order. It will take a good 2-3 weeks to get the phone in your hands. I used Singapore post as my shipping option(extra $$), but they decided to send it via China Post epacket, which was pretty fast once EMS gets their hands on the package. It reached US within 3 days, but USPS/customs had it for a good 3 days after reaching our shore .
jpkml said:
I got the Prime (32GB) version from merimobiles.com . The buying experience was good. If you plan on buying from them, signup for their emails, you get a $20 discount points. Create a new account and order via that account to get the status via their website. I forgot to do both these steps, and had to ping them everyday (5-6am EST ) to followup on my order. It will take a good 2-3 weeks to get the phone in your hands. I used Singapore post as my shipping option(extra $$), but they decided to send it via China Post epacket, which was pretty fast once EMS gets their hands on the package. It reached US within 3 days, but USPS/customs had it for a good 3 days after reaching our shore .
Click to expand...
Click to collapse
Good info, thanks and just found out it has 1yr warranty as well with option for $10 to buy 24month warranty.
Was there any import taxwith the singapore post option you selected?
I'll probably add shipping insurance too, just to be safe.
Did you check out with paypal? is there any protection from them in regards to shipping?
No import tax. ePackets is a sort of China Post & USPS offering. You can actually track the package using both their tracking system. I didn't get any insurance. The phone itself came nicely packaged in a bubble wrap. I did use paypal, but didn't check their shipping protection.
I also have T-Mobile and recently received my Redmi Note 2 16GB version from gearbest.com. Tried out a few different ROMs, both MIUI and AOSP. On MIUI, the network symbol shows an "H+" whenever I'm using data. On AOSP, only "3G" shows up top even though I have "4G Preferred" selected in network settings. Hope that helps!
Friend bought me the Redmi Note 2 straight from China. I have AT&T. Took my SIM out of the IPhone 5S and stuck it in slot 2 SIM. You can't slide it in all the way in as the SIM is a little bit shorter than the slot, it only works if you don't slide it in all the way. I get the H+ for data too which I assume is 3G and my signal is fine. If anyone has an easy way to use the LTE please update!
haywires said:
Friend bought me the Redmi Note 2 straight from China. I have AT&T. Took my SIM out of the IPhone 5S and stuck it in slot 2 SIM. You can't slide it in all the way in as the SIM is a little bit shorter than the slot, it only works if you don't slide it in all the way. I get the H+ for data too which I assume is 3G and my signal is fine. If anyone has an easy way to use the LTE please update!
Click to expand...
Click to collapse
For the moment, this will not work on LTE using AT&T or T-Mobile as the RN2 does not have the correct band/frequency coverage. If somebody figures out how to hack the baseband and add the right coverage, and there is not an actual physical/hardware limitation, that could possibly open up LTE coverage in the future.
HSPA+ is quite fast, in fact, T-Mobile refers to it as "4G" (but not LTE). Some folks will want/demand LTE coverage, but depending on your use case, HSPA+ may be perfectly fine.
tlxxxsracer said:
Thanks i also spoke with Tmobile store rep, and they said it will work and that i should get 4g (hspa+) and showed a map of exact coverage the the frequencies in my area.
Where did you buy yours from?
Click to expand...
Click to collapse
haywires said:
Friend bought me the Redmi Note 2 straight from China. I have AT&T. Took my SIM out of the IPhone 5S and stuck it in slot 2 SIM. You can't slide it in all the way in as the SIM is a little bit shorter than the slot, it only works if you don't slide it in all the way. I get the H+ for data too which I assume is 3G and my signal is fine. If anyone has an easy way to use the LTE please update!
Click to expand...
Click to collapse
HSPA+ (H+) is similar to 3G, but is as fast as band B20 of LTE (the slowest LTE band)
~ Xiaomi Redmi Note 2 Prime ~
Satenru said:
I also have T-Mobile and recently received my Redmi Note 2 16GB version from gearbest.com. Tried out a few different ROMs, both MIUI and AOSP. On MIUI, the network symbol shows an "H+" whenever I'm using data. On AOSP, only "3G" shows up top even though I have "4G Preferred" selected in network settings. Hope that helps!
Click to expand...
Click to collapse
correct me if I'm wrong, but I think GearBest is one of those dealers who'd install custom ROM that gives a bunch of pop-ups on Xiaomi Redmi Note 2
felix168 said:
correct me if I'm wrong, but I think GearBest is one of those dealers who'd install custom ROM that gives a bunch of pop-ups on Xiaomi Redmi Note 2
Click to expand...
Click to collapse
I don't know if it was a custom ROM but it did came with a bunch of bloat ware because I barely had any free space left so I just flashed TWRP and installed a fresh ROM over it.
I can confirm that the phone works on T-mobile HSPA+. I used it while visiting the US recently with a T-mobile MVNO (GoSmart).
I can also confirm that Gearbest ships the phone in an almost unusable state due to constant popups. Flashing new ROM is necessary.
I've seen a few posts saying you can cross flash so you can move your v60 from t-mobile to att. However none of them are very clear.
I am going to have to switch from t-mobile to att as t-mobile shut down the sprint network in an area I need to be with some regularity and now has near zero coverage. Their wifi calling doesn't work well either as it registers very slowly and doesn't stay registered.
I've waited over a year for t-mobile to deliver promised coverage replacements.
It's becoming more and more a problem as I need to be in the area more often. Would appreciate any details anyone can offer. I don't want to give up my v60 yet or have to buy one.
You will it informative. But please be advised that there is no firmware available for AT&T V60. So it is not possible unless your phone is factory unlocked by carrier.
You can't unless you don't mind it being a data-only device (and I can't guarantee even that will work). AT&T has a VERY select list (I believe this is by IMEI so cross-flashing will not help) of phones they allow to use VoLTE on their network. Other carriers' phones are not among them. You MIGHT be able to beg/harass customer service to whitelist your IMEI. I think I've read about that happening, but I might be thinking of Verizon. I wouldn't count on it though. AT&T has a vested interest in making you buy a phone you can't use anywhere else. They're not interested in BYOP mercenaries who want to try out their service for a month then bounce back to TMO or Verizon.
Eric janaika said:
You can't unless you don't mind it being a data-only device (and I can't guarantee even that will work). AT&T has a VERY select list (I believe this is by IMEI so cross-flashing will not help) of phones they allow to use VoLTE on their network. Other carriers' phones are not among them. You MIGHT be able to beg/harass customer service to whitelist your IMEI. I think I've read about that happening, but I might be thinking of Verizon. I wouldn't count on it though. AT&T has a vested interest in making you buy a phone you can't use anywhere else. They're not interested in BYOP mercenaries who want to try out their service for a month then bounce back to TMO or Verizon.
Click to expand...
Click to collapse
Sure,you can crossflash the T-Mobile version with AT&T firmware regardless of the IMEI and it will work.I'm on A12 AT&T with a USC V60 and have no issues at all.It will be required to have the AT&T firmware on it for the IMS to configure properly.I did this back when AT&T shut their 3g down to work around it.
Arghtastic said:
I've seen a few posts saying you can cross flash so you can move your v60 from t-mobile to att. However none of them are very clear.
I am going to have to switch from t-mobile to att as t-mobile shut down the sprint network in an area I need to be with some regularity and now has near zero coverage. Their wifi calling doesn't work well either as it registers very slowly and doesn't stay registered.
I've waited over a year for t-mobile to deliver promised coverage replacements.
It's becoming more and more a problem as I need to be in the area more often. Would appreciate any details anyone can offer. I don't want to give up my v60 yet or have to buy one.
Click to expand...
Click to collapse
The key thing,does AT&T work in that area?AT&T and T-Mobile are currently struggling trying to get 5g fully working in all areas and so far it's been a nightmare.I'm in Nashville,TN. and it's horrible in most areas.Even down to the 4g towers are degraded and data speeds are back to 3g speeds as we speak.It's not only T-Mobile at the moment.
Where did you get the AT&T firmware? And the process to cross flash?
Royaltiger said:
Where did you get the AT&T firmware? And the process to cross flash?
Click to expand...
Click to collapse
This is 20q A11.I used QCFire and unchecked sid_a and sid_b.Works great!
LMV600AM Restore/Ugrade Guide
This restore process is intended for the AT&T V60 (lmv600am) model and will WIPE your data so back it up if you want to keep it! This process will restore the lmv600am to original factory state for the AT&T v60 v20q build (a11). I’ve dumped all...
forum.xda-developers.com
Surgemanxx said:
The key thing,does AT&T work in that area?AT&T and T-Mobile are currently struggling trying to get 5g fully working in all areas and so far it's been a nightmare.I'm in Nashville,TN. and it's horrible in most areas.Even down to the 4g towers are degraded and data speeds are back to 3g speeds as we speak.It's not only T-Mobile at the moment.
Click to expand...
Click to collapse
Yes att works. No its not 5g in either case. Too rural. T-mobile for example replaced more rhan half a dozen towers for one town in the area with two. Two. Then wondered why people had no coverage.
Arghtastic said:
Yes att works. No its not 5g in either case. Too rural. T-mobile for example replaced more rhan half a dozen towers for one town in the area with two. Two. Then wondered why people had no coverage.
Click to expand...
Click to collapse
I have been on AT&T for almost a month about how bad the service is around my home address.We have 1 tower in about a 10 mile radius that's trying to serve at least 10,000 subscribers every day and it's failing hard.I'm doing good to get 4 mbps down and .5 up.Yes,that's a dot in front of the 5..lol..I told them point blank,why shut down 3g when you can't even handle the load with 4g alone?My response was, "we're working on 2 towers that are planned to be upgraded to 5g by the end of the year."Those 2 towers haven't worked in 8 years I know of..lol...I remember when they activated 4g and it wasn't this bad.The worst part in the US we're down to 3 carriers period.T-Mobile,AT&T,and Verizon.The rest are all MVNO's so those don't account for anything..lol..
Surgemanxx said:
I have been on AT&T for almost a month about how bad the service is around my home address.We have 1 tower in about a 10 mile radius that's trying to serve at least 10,000 subscribers every day and it's failing hard.I'm doing good to get 4 mbps down and .5 up.Yes,that's a dot in front of the 5..lol..I told them point blank,why shut down 3g when you can't even handle the load with 4g alone?My response was, "we're working on 2 towers that are planned to be upgraded to 5g by the end of the year."Those 2 towers haven't worked in 8 years I know of..lol...I remember when they activated 4g and it wasn't this bad.The worst part in the US we're down to 3 carriers period.T-Mobile,AT&T,and Verizon.The rest are all MVNO's so those don't account for anything..lol..
Click to expand...
Click to collapse
Tried a signal booster? I used to run a 3 watt (max legal) and it made service possible. Also If you have wifi/internet you may be able to request a microcel from ATT for free
Arghtastic said:
Tried a signal booster? I used to run a 3 watt (max legal) and it made service possible. Also If you have wifi/internet you may be able to request a microcel from ATT for free
Click to expand...
Click to collapse
I'm working on a booster as we speak.It's become horrible the last couple of months,and all this 3g shut down crap.I have even down to started switching modem files on my LG devices in hopes it may help some.Time will tell..lol..