How to update LG Leon H340N to Android M and Unlock the Bootloader - LG Leon Guides, News, & Discussion

How to update LG Leon H340N to Android M and Unlock the Bootloader
1. The first thing that you need to do is to download the following zip-archive, it contains all the tools that you need + the actual firmware file:
https://mega.nz/#!QgwDHYpB!7TCpc0_ycqjMimhFkHe3yq172tfu__8XIXRJxoxOYHQ
2. After downloading and extracting the archive, run the file named "LG-Mobile-Driver_v4.0.4.0.exe" as administrator, follow the instructions on the screen.
3. Turn off your phone and then hold the volume up button while plugging in the USB-cable to your computer, the phone should enter download mode.
4. Navigate to the folder named LG Flash Tool 2014, open the file named "LGFlashTool2014.exe". When the software is open, change the type to "3GQCT", the phone mode to "Emergency" and then select the .KDZ-file named "H340n20A_00_0512.kdz", then click the button "Normal Flash".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. A popup will now appear with the title "Read Phone Information", press the button "Start".
6. A new window should now be visible with the title "Select Country & Language", press the button "Clear phone Software update Registry". In the box country, select "Different Country", then in the box language select your language. Then press OK.
7. The firmware should now be flashed over onto your phone, it may take a few minutes and the phone will automatically reboot when it's done.
How to unlock the bootloader after flashing the firmware:
Open "Settings" and then go to "About Phone", then click on "Software info", then tap on the entry "Build info" a few times till developer mode is enabled. Then go back and enter "Developer options", then active "Enable OEM unlock"

First question:
Don't we have to do something after enabling OEM unlock? I mean, I think it's just enable the unlocking itself. After that we can do it via fastboot commands (fastboot oem unlock). Am I right?
Second question:
LG's site says that unlocking is irreversible. But there is a command to do that: fastboot oem lock. Or it isn't working on LG devices?

Can you use this .kdz file on any LG Leon H340n phone? I my current is V10g. That wouldn't be a problem?

xHair said:
Can you use this .kdz file on any LG Leon H340n phone? I my current is V10g. That wouldn't be a problem?
Click to expand...
Click to collapse
I've flashed it on my nordic LG Leon without issues, but I cannot guarantee that this will work for everone.
Sent from my SM-G928F using Tapatalk

I'm gonna test it on both my h345 and ms345.

all work perfect! with a lg leon h340n italian version (tim). THANKS

I am getting this message every time I reboot what is that and what must I do to not see this
My LG Leon is H340N (TIM Version) Italy

Nickblorck said:
I am getting this message every time I reboot what is that and what must I do to not see this
My LG Leon is H340N (TIM Version) Italy
Click to expand...
Click to collapse
I'm having the same issue as well, but it's nothing to worry about and isn't that annoying either way.
Sent from my SM-G928F using Tapatalk

GethPrime said:
I'm having the same issue as well, but it's nothing to worry about and isn't that annoying either way.
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
IOk then I hope when the original version of my phone comes I won;t have this prob

ninjasinabag said:
I'm gonna test it on both my h345 and ms345.
Click to expand...
Click to collapse
Did it work for you? Im debating on whether or not to try it

ricbaez said:
Did it work for you? Im debating on whether or not to try it
Click to expand...
Click to collapse
you cant installa that kdz on H345 and ms345 get hardbrick, dont try guys!!!

This rom work perfect on all European H340n!
there's just a boring initial message. Jump it.

Trying this out on my 345, will post results ASAP,
Edit: Phone bricked, I do not suggest doing this on the T-Mobile Leon phone, I also am responsible of everything that happened to the phone, and thanks, nonetheless.

this will work on h340ar?

ricbaez said:
Did it work for you? Im debating on whether or not to try it
Click to expand...
Click to collapse
On my ms345 it did, but I lose my radio in the process. No signal.
My h345 went utter apesh*t and I'm afraid to try again.

I can confirm, this works on H340AR.

Q
Is there any way to flash TWRP recovery in 6.0 without rooting after enabling OEM Unlock?

Worked on EE UK H340n running 5.0.1 -- does not offer option to use SD as internal storage but I am going to try a factory reset and see if this changes
---------- Post added at 04:26 PM ---------- Previous post was at 04:02 PM ----------
Still the same, after factory reset it only offers the option of portable storage, not format as internal... why is doing this?

Ok - factory reset doesn't work, but there is a way, needed to use adb, have to use this method from a post about a samsung phone here: I am unable to post ext links, search for bgr galaxy-s7-edge-tips-microsd-adoptable
install adb,
sm list-disks to list the disks
sm partition disk:179,64 private
where 179,64 is the name of my disk from the results of the sm-list disks command
now it works as internal storage for data and apps

martinsgo said:
I can confirm, this works on H340AR.
Click to expand...
Click to collapse
Witch version did you use? Has the oem unlock for the bootloader?
Thanks.

Related

[ROM][CDMA][Stock 5.0.1] SprG3 V5

Thread Closed! Got a new phone so I am no longer support this device. Sorry for any inconvenience!
Since I am no longer maintaining this ROM I recommend that you flash BarePop by @engine95
For GSM please check out the GSM version of this ROM: ki11aprime's GSM editionhttp://forum.xda-developers.com/sprint-lg-g3/development/rom-primegsm-teamsprg3-t3132906​
How to's:​
How to activate G4 theme:
Code:
1)Download Shortcut Manger
2)Click "Search" then click "system app"
3)Search for "Theme"
4)launch LGThemeChooserActivity
5)Then select the theme
Thanks @ki11aprime
How to fix com.android.phone error
Code:
MAKE SURE THAT YOU DO NOT HAVE SMART COVER INSTALLED!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Download and install [URL="http://forum.xda-developers.com/showpost.php?p=53618487&postcount=3"]XPOSED G3 Tweakbox[/URL] and [URL="http://forum.xda-developers.com/showthread.php?t=3034811"]XPOSED Framework for lollipop[/URL]
Buy a copy of XPOSED G3 Tweakbox via the app
Download a root explorer with a root text editor I use Root Browser and download Titanium Backup
Use the root explorer to edit your build.prop, scroll down until you see this line: ro.build.target_operator=SPR change "SPR" to: GLOBAL and then save
Use titanium backup to uninstall the LG text message app and find a alternative (I use textra)
Reboot
Go into XPOSED G3 Tweakbox and click "Theme Tweaks" then toggle "Enable Theme mod"
Next click "Status Bar" and scroll down
Now tap on "Change wifi icon set" and set the type you want ( I use "OPEN") then press "CANCEL"
Now tap on "Change signal icon set" and set the type you want ( I use "OPEN (5 BAR)") then press "CANCEL"
Now tap on "Change data icon set" and set the type you want ( I use "VZW") then press "CANCEL"
Reboot
BOOM! No more com.android.phone popups- Note that the data enable/disable icon will not work.... That I cannot do anything about!
WIFI issue fix:
Code:
Go into settings and click "WI-FI"
Once in the "WI-FI" settings click the three dot menu (upper right hand corner)
Then click "Advanced WI-FI"
Scroll down and uncheck "WI-FI signal weak"
Then uncheck "Switch to mobile data"
Reboot
Thanks [user=5776618]@1619415[/user]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
To join our team and help us make more great work! These are jobs/tasks we need help with:
CM Dev: ( Someone who can build CM on a regular bases)
Linux .sh script maker: ( Someone who can make cool .sh scripts)
If you can do any of these please PM me we would love to have you on the team!​
Just to be certain, the phone needs to already be sim unlocked correct? You can't just flash this ROM and be sim unlocked from that?
kljohnson05 said:
Just to be certain, the phone needs to already be sim unlocked correct? You can't just flash this ROM and be sim unlocked from that?
Click to expand...
Click to collapse
Nope, just flash ROM and your unlocked as long as your on this ROM once you leave it, you lose it.
I get an error in TWRP when flashing. It can't open the zip
Porcupineomg said:
I get an error in TWRP when flashing. It can't open the zip
Click to expand...
Click to collapse
Try downloading again... With a diffrent server... Like the closest one to you.
Got it, thanks for the reply! Never been gsm unlocked before, giving this a go!
kljohnson05 said:
Got it, thanks for the reply! Never been gsm unlocked before, giving this a go!
Click to expand...
Click to collapse
OK, NP
Yeah having same problem, but twrp restarts itself when it attempts to flash. DL from my phone and computer, but computer cant transfer the file to my phone for some reason.
This looks so good a with the G4 theme
I'll include in the next update for those who want it:thumbup:
Sent from my LG-LS990 using XDA Free mobile app
kljohnson05 said:
Yeah having same problem, but twrp restarts itself when it attempts to flash. DL from my phone and computer, but computer cant transfer the file to my phone for some reason.
Click to expand...
Click to collapse
Reflash twrp and download from the server nearest to you. The flashing errors are coming from AFH sometimes downloads fail with them.
kljohnson05 said:
Yeah having same problem, but twrp restarts itself when it attempts to flash. DL from my phone and computer, but computer cant transfer the file to my phone for some reason.
Click to expand...
Click to collapse
It was a bad upload, hence the 70mbs :silly: I am re uploading it now everyone, see if that fixes it. I also added a back up link try that if AFH does not work.
1619415 said:
Warning- This ROM is a port of a T-Mobile LG G3 (D851) ROM meaning stuff can break! Me and my team are not responsible if anything happens!
.
Click to expand...
Click to collapse
SO if im coming from kitkat stock based rom, no need to flash bootloaders or anything, straight flash to this from twrp ?
cletusarrarr said:
SO if im coming from kitkat stock based rom, no need to flash bootloaders or anything, straight flash to this from twrp ?
Click to expand...
Click to collapse
If you make a backup and have twrp installed you should be good:good:
kool
i will try in a few hours and post feedback and bugs if i can find any. Thanks
cletusarrarr said:
kool
i will try in a few hours and post feedback and bugs if i can find any. Thanks
Click to expand...
Click to collapse
NP's glad you like it!
whats in the 1.1 update ?
cletusarrarr said:
whats in the 1.1 update ?
Click to expand...
Click to collapse
I'm testing it didn't mean to share

Bootloop after 6.0.1 OTA update

2 weeks ago I did a 6.0.0 to 6.0.1 OTA update and my device went into I a so called bootloop.
I tried everything on http://www.skipsoft.net/?page_id=1647 - without success.
The factory reset and the options in the recovery menu of the Nexus 9 did not help.
I cannot load a new image because I did not Enable the developer options nor the USB debugging via the menu when the device was OK.
I installed the SKIPSOFT UNIFIED ANDROID TOOLKIT and connected to my Nexus 9 (WiFi).
I connected successfully to the device and tried the UNLOCK BOOTLOADER part of the app.
It didn't work - it gives "ERROR - you have to enable debugging mode in order to unlock".
So, the question is: Can you unlock the bootloader with the SKIPSOFT UNIFIED ANDROID TOOLKIT if one did not Enable the enable developer options nor the usb debugging via the android menu?
If not, can you suggest to me what may be my options as I am stuck. Warranty of the device has just passed.
Thank you in advance,
S.
If you can get into recovery, you might be able to sideload the OTA again: - http://forum.xda-developers.com/nexus-9/help/failed-marshmallow-update-stock-android-t3226704
Get the January OTA zip from here: - http://forum.xda-developers.com/showpost.php?p=64693937&postcount=557
Or whatever OTA you need from that thread.
xyz
Thank you very much for your comment corkiejp. I just followed the sideloading sith the January 6.0.1 update packae and.... IT WORKED Thank you very much. God bless this community
bluesharp said:
Thank you very much for your comment corkiejp. I just followed the sideloading sith the January 6.0.1 update packae and.... IT WORKED Thank you very much. God bless this community
Click to expand...
Click to collapse
Your welcome, remember to enable "OEM unlocking" in developer options, even if you have no intentions of using it at present!
corkiejp said:
Your welcome, remember to enable "OEM unlocking" in developer options, even if you have no intentions of using it at present!
Click to expand...
Click to collapse
I just enabled oem unlock. i am writing this from my nexus 9, and i have you friend to thank for
I had same problem, couldn't get the recovery method to work properly.
Was able to return to HTC for repair, just received it back today.... got even worse. Started to set up again.
Here is list of problems:
first it froze on the homescreen on initial start up
froze while updating the google apps
now doing the reboot thing
frozen on the lock screen
can hear a soft 'tap' sound while in locked mode
Needless to say will be returning to retail for full refund.
Something tells me either Android or manufactures haven't fully tested Marshmallow properly with hardware, as having bad problems with my LG G4 also on M6 and gone for repair.
...
So I have the same problem. While updating to 6.0.1 there was an error message and after that it got into a bootloop. Can I sideload when I don't see character identifier for my device as described in point 4 in the link? All I see is "OS - n/a"
Kuhuma said:
So I have the same problem. While updating to 6.0.1 there was an error message and after that it got into a bootloop. Can I sideload when I don't see character identifier for my device as described in point 4 in the link? All I see is "OS - n/a"
Click to expand...
Click to collapse
At your own risk. You could try with the latest OTA zip linked above.
It shouldn't do anymore damage, probably just fail if your system was on an earlier version than what this updates from.
If it fails, try an earlier OTA.
Report back on your progress.
corkiejp said:
At your own risk. You could try with the latest OTA zip linked above.
It shouldn't do anymore damage, probably just fail if your system was on an earlier version than what this updates from.
If it fails, try an earlier OTA.
Report back on your progress.
Click to expand...
Click to collapse
I followed every step but I'm stuck at step 9 and 10. Neither I see "Wipe Cache" nor "Apply update from ADB". Is it because I never unlocked developer options on my device? I'm in Fastboot Mode btw.
Kuhuma said:
I followed every step but I'm stuck at step 9 and 10. Neither I see "Wipe Cache" nor "Apply update from ADB". Is it because I never unlocked developer options on my device? I'm in Fastboot Mode btw.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Very strange that your recovery screen does not have them options. (dev. options shouldn't matter).
Try rebooting in recovery and check them again.
You can also do a factory reset from the hboot menu, which might resolve your problems.
corkiejp said:
Very strange that your recovery screen does not have them options. (dev. options shouldn't matter).
Try rebooting in recovery and check them again.
.
Click to expand...
Click to collapse
Ah, this helped me. I have to press volume up only once. :silly:
I'll report my progress.
---------- Post added 29th January 2016 at 12:25 AM ---------- Previous post was 28th January 2016 at 11:28 PM ----------
It worked. Thank you so much for your help. Only thing i f***** up, was the recovery mode. I held the volume up button for too long and always ended up in fastboot mode.

Current version is not avaiable for user

Hello,
I have a german o2 H850 and the firmware was v10b from o2 (O2D).
But i wanted an open device. So i decided to flash the open eu v10c kdz.
Now i have a warning message after boot:
Current version is not avaiable for user. Cant find match cust...
You can see it on the screenshot.
I have no root because i dont want to unlock my bootloader.
So anyone know where i can find the o2d v10b or v10e kdz?
Thanks in advance!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-H850 using XDA-Developers mobile app
in order to permanent remove the message, go to root/cust folder and delete every file and folder from there (all content)
the message will disappear and wont ever come back after a reboot that is
please note that you need root permission for this so you either get the firmware rooted and use a file manage to delete content or delete it from TWRP file manage in recovery
gwolfu said:
in order to permanent remove the message, go to root/cust folder and delete every file and folder from there (all content)
the message will disappear and wont ever come back after a reboot that is
please note that you need root permission for this so you either get the firmware rooted and use a file manage to delete content or delete it from TWRP file manage in recovery
Click to expand...
Click to collapse
Thanks but is there a way to root without bootloader unlock?
I saw only the way to flash supersu in twrp... But i dont want to unlock my bootloader.
Sent from my LG-H850 using XDA-Developers mobile app
currently there is no exploit available to be able to root without TWRP and bootloader unlock
anyway, you can re-lock bootloader if you want to for example sell it after
gwolfu said:
currently there is no exploit available to be able to root without TWRP and bootloader unlock
anyway, you can re-lock bootloader if you want to for example sell it after
Click to expand...
Click to collapse
Really? How works that? And nobody will see that i had unlocked my bootloader? Not even LG?
Sorry i ask because i mean it didnt work at the G4.
Sent from my LG-H850 using XDA-Developers mobile app
I'm looking for exactly the same O2D KDZ as I did the same as OP and don't want to lose my guarantee by rooting.
Besides these annoying errors, 10b seems more stable than 10d.
How to find this KDZ on LG's servers?
Thanks!
I searched the web for a long time and tried some tools to find the v10b O2D Germany kdz but unfortunatly without success
I would be very happy if somebody could help us to find the kdz! :fingers-crossed:
Good news!
I just started LG Bridge and searched for an update. Got newest v10e from O2D automatically installed, everything is fine again, no need to root, wipe whatsoever!
tiis said:
Good news!
I just started LG Bridge and searched for an update. Got newest v10e from O2D automatically installed, everything is fine again, no need to root, wipe whatsoever!
Click to expand...
Click to collapse
great but didnt work for me
v10e update was found but everytime i try to install the update lg bridge says "update cant be downloaded"...
i used another pc and reseted my device without luck.
if anyone can help i would be very happy!
@tiis which OS do you use on your PC?
I have Win10 and the LG Bridge firmware installation failed...
dusu84 said:
@tiis which OS do you use on your PC?
I have Win10 and the LG Bridge firmware installation failed...
Click to expand...
Click to collapse
I updated with LG Bridge on a Hackintosh with OS X 10.11.

Need help to restore my Honor 9

I tried to rebrand my Honor 9 model STF-AL10 to European model. It successfully flashed new oeminfo but now won't boot because it shows that message.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also if I boot to fastboot and rescue mode I can't flash anything because now it shows that message.
What can be done ? I'm also willing to pay to repair my phone...
I think your phone is bricked now, Only Huawei can help you now buddy. FRP and Bootloader should be unlocked
Rommco05 said:
Before u start rebrand phone was phone and FRP unlocked?
Click to expand...
Click to collapse
Phone was unlocked but Chinese models don't have FRP Lock so I couldn't turn it off. The FRP lock appeared when the Chinese oeminfo was replaced with the European one and suddenly also the bootloader was locked again.
But I have a feeling that I forgot to turn on USB debugging when flashing using that guide on forum...
Anyway maybe DC Phoenix is my last option before sending it to Huawei to reflash OS. Apparently that tool can flash over locked bootloader and FRP.
Does anybody know how it works and if there is a free alternative?
gljiva123 said:
Phone was unlocked but Chinese models don't have FRP Lock so I couldn't turn it off. The FRP lock appeared when the Chinese oeminfo was replaced with the European one and suddenly also the bootloader was locked again.
But I have a feeling that I forgot to turn on USB debugging when flashing using that guide on forum...
Anyway maybe DC Phoenix is my last option before sending it to Huawei to reflash OS. Apparently that tool can flash over locked bootloader and FRP.
Does anybody know how it works and if there is a free alternative?
Click to expand...
Click to collapse
Did you select the correct oeminfo for your firmware? STF-L09C10 is the Russian one and STF-L09C432 is the European one.
Also, did you remember to boot into recovery (volume up + power button) and select the option to clear your data after the rebrand?
You might still be able to boot into recovery and try a reset, but I'm not sure if that will help.
Ring0h said:
Did you select the correct oeminfo for your firmware? STF-L09C10 is the Russian one and STF-L09C432 is the European one.
Also, did you remember to boot into recovery (volume up + power button) and select the option to clear your data after the rebrand?
You might still be able to boot into recovery and try a reset, but I'm not sure if that will help.
Click to expand...
Click to collapse
I selected the C432. And I remembered to wipe out the internal storage and data after the rebrand. I honestly don't know what went wrong (besides not having USB debugging turned on).
I also tried to boot into recovery but only the first message appears. In the end I think there is no recovery at all (or is corrupted)...
But it's funny how those security features meant to protect the phone in the end make it harder to recover.
Try to reflash Boot.IMG , Recovery.IMG via ADB in Fastboot mode and SYSTEm.IMG in TWRP.. (On your own risk)... maybe it will work....
4r44444 said:
Try to reflash Boot.IMG , Recovery.IMG via ADB in Fastboot mode and SYSTEm.IMG in TWRP.. (On your own risk)... maybe it will work....
Click to expand...
Click to collapse
Where do I get those files ?
Rommco05 said:
I have full backup from STF-L09C432B130 but I don't know if is helpful here, later I can upload somewhere
Click to expand...
Click to collapse
That would be nice. I don't have the backup of full stock rom . And I agree with you, probably it won't be possible to flash it with fastboot but with DC Phoenix it might be.
Rommco05 said:
I think we are wrong, this backup is made via TWRP so is flashable only via TWRP... anyway I will postes here. You need extract full firmware B130 and this files flash via fastboot. I have this files but I don't have time today all uploaded here and posted. If want u can do by yourself. Find Huawei Extractor (is here on XDA) and download this zip :
Extract the biggest one and here u will find all staff for recover phone, I can't asist you today
FULL FIRMWARE FRD-L09C423B130
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1637/g104/v90868/f2/full/update.zip
http://update.hicloud.com:8180/TDS/...68/f2/full/public/update_data_full_public.zip
http://update.hicloud.com:8180/TDS/...l/STF-L09_hw_eu/update_full_STF-L09_hw_eu.zip
FULL TWRP BACKUP FRD-L09C432B130
https://drive.google.com/open?id=0B1xSFdgEasy-YTZsUTk0c3k2X1U
...I hope is able for download...
I will make maybe something like repozitory for Honor 9 but don't know when...
Click to expand...
Click to collapse
thanks, will give it a try
In the end I restored it using DC Phoenix, but it's not for free.
gljiva123 said:
In the end I restored it using DC Phoenix, but it's not for free.
Click to expand...
Click to collapse
Better than having a dead phone
Rommco05 said:
...and phone is repaired?
Click to expand...
Click to collapse
Yes it is

Samsung Galaxy S20 SCG01 Snapdragon One UI 5 Android 13 Convert from 5C-51A

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download Links
Samfw Tool Download
TWRP Recovery TWRP 3.7.0_12
Vbmeta_disabled Download
5C-51A Firmware SC51AOMU1DWA5
if you want Magisk Download
Unlock the bootloader
1. Go to your phone's settings
2. Scroll down and click on the "About phone" section
3. Click on "Software information"
4. Tap on the build number several times until you see a message saying "Developer mode has been turned on"
5. Go back to the settings homepage
6. Scroll down to the very bottom and select the "Developer options" section
7. Enable the "OEM unlocking" option
8. Scroll down and enable the "USB Debugging" Option
9. Connect your phone to your computer with a USB cable
10. Turn off your phone
12. Connect Use to only in PC press volume up + volume down at the same hold same time now connect C port to Phone
13. When you see the blue "Warning" screen, long press the volume up button to unlock bootloader
14. After the reset, start a new device setup and connect only to the internet skip all.
15.Enable Developer option if you can see Bootloader unlock tick Now good to go.
Install TWRP Custom Recovery
16. Open Odin
17. Uncheck auto reboot in Odin and flash TWRP in AP slot and vbmeta_disabled.tar in USERDATA Start Flash. (If failed you are not connected internet after Unlocked Bootloader so Follow up 14)
18.Hold volume down and power until the screen goes black then immediately switch to holding volume up and power to reboot into TWRP.
19.Go to Advanced > Terminal, type: multidisabler. (You will see " - Finished." When it is done.)
20.Go to wipe, format data, and type "yes" to confirm.
21.go Back Select "Dalvik / ART Cache" "Data" and "Cache”.
21. Reboot to TWRP
22. Advance reboot to Download
Install One UI 5.1
23. Extract 5C-51A file
24. Open Samfw Odin tool Choose BL,AP,CP,CSC flash
Enjoy
Everything working
OTA Update Support
Note : Same as AU Bloatware if you want experience A13 One UI 5 then flash
If you need without Bloatware Stock Samsung
1. Flash BL,AP,CP,CSC from 5C-51A
2.once rebooted power off rebbot to Download mode
3.Flash only AP from G981NKSU2IWB4
4. Factory Reset once from Recovery and reboot to system.
Bhammmm good to go everything works except NFC without single issue.
Screenshot
G981N bit version was 2, SCG01 was 1.Can we able to downgrade after flashing that rom?
Yes you can downgrade
E Sim Working?
How to run 5G on SC-51A in India
Does NFC not work at all?
My Samsung Galaxy S20 FE 5G just installed an update earlier today and it installed UI 5.1. This is my only active and working phone that use to be on Verizon and now I have it working on my California Lifeline phone service. I also have Starry internet at home so that I don't run my data in up to the CAP.
scg01 already got ui5 last week officially
Sureshtuty said:
G981N bit version was 2, SCG01 was 1.Can we able to downgrade after flashing that rom?
Click to expand...
Click to collapse
Have u tried Downgrading brother? I'm also trying to Convert my SCG01 to a Global ROM and have E-SIM feature..
Prathamesh Kapure said:
Has anyone succeeded in converting any SCG01 Device to Global One...
Click to expand...
Click to collapse
Same System on a chip?
Akhil99 said:
Same System on a chip?
Click to expand...
Click to collapse
Yes the SCG01 and the US Model (G981U1/G981U) have the same SoC #Snapdragon 865. But Odin refuses to Flash U/U1 Firmware for some reason.
Prathamesh Kapure said:
Yes the SCG01 and the US Model (G981U1/G981U) have the same SoC #Snapdragon 865. But Odin refuses to Flash U/U1 Firmware for some reason.
Click to expand...
Click to collapse
contact me for odin solution. i have solution for flashing U/U1 Firmwares on SCG01
Akhil99 said:
Same System on a chip?
Click to expand...
Click to collapse
yes you can also do with my odin trick
krazykishan said:
contact me for odin solution. i have solution for flashing U/U1 Firmwares on SCG01
Click to expand...
Click to collapse
krazykishan said:
How can I contact yo brother? I need to update my Device to U1 firmware
Click to expand...
Click to collapse
share your email address or telegram id i will contact you bro
krazykishan said:
share your email address or telegram id i will contact you bro
Click to expand...
Click to collapse
Telegram - @Anonymous_3647
[email protected]
I have a G986W version with UI 5.1. I would like to change to U1 version to get esim working. Is the process listed above the same to switch ROM's? If not, can someone please explain the steps need?
I have the latest version of odin but unsure what file from here I need.
Thanks
Prathamesh Kapure said:
Telegram - @Anonymous_3647
Click to expand...
Click to collapse
help me bro,,, [email protected]
krazykishan said:
share your email address or telegram id i will contact you bro
Click to expand...
Click to collapse
help me bro,,, [email protected]

Categories

Resources