Heyhey,
I've been directed here from the XDA-assist forum (so yes, I am quite new here ), I hope that this is the correct place for my questions.
My problem is this:
I have an Huawei Y6, SCL-L21 with android 5.1 (I think it was 5.1, it was definitely 5.something). Following a youtube-video, I tried to root my phone using kingoapp. It said it was successful, but I didn't saw the SuperSu app, so I tried rebooting first. Now it seems that my phone doesn't want to boot up any more :/. I just get the Huawei logo and that's it.
I can still get into the recovery menu (EMUI, the one that was original on the device, access through sound up + power on), so I still have some hope :/. I've tried 'wipe cache partition' and 'wipe data/factory settings', neither helps.
It has come to my attention that reinstalling a back-up from the original rom might help. I, however, do not have a back-up (it will be the first thing I will look for when I get my phone working again though).
I have been searching for a stock rom, or even an custom rom that I could use to get my phone working again.
I've found a site with a custom rom that was supposed to work for my phone, but when I try it by putting the dload folder on an external (32G) SD-card an powering up my phone by pressing sound up + down + power on, I get 'Software install failed!', so apparently that is not of much help :/.
So what I wondered now, most importantly, Is there a way to get my device working again?
And also; What could be the reason that the installation of a rom fails? Could it be something I'm doing wrong? Can it be that it still needs an OS installed and that it is actually more of an update instead of a new OS? Can there be something wrong with the SD-card(wrong formatting or whatever) ?
And off course; if I can only get my device to work again using a rom; Is there a place known where I could find/get stock or custom rom's?
Any help would definitely be appreciated!
Kind regards,
Ilja_B
OK! So, I have found the factory ROM and was able to get my phone to work again ^^
I've put it on the SD-card and booted my phone the way I explained above. So apparently there was no problem with my SD-card.
I wanted to post the link here as a reply in case anyone else needed it, but apparently I can't post links :/
Does anyone has an idea where a good place would be to post this, so others might also benefit?
Grtz,
Uplad to google drive
i have the same problem help me please
I've found my ROM on the bottom of this page here [1] under the 'download'-tab. From the name of the file I get that this is for the Huawei Y6 SCL-L21 for Germany, Italy, Netherlands, Belgium, Portugal and others. Hopes this helps, or at least gets you on your way to find the correct ROM for yourself. You should find a proper explanation on how to install the ROM online.
[1] http://m.huawei.com/bemobile/consumer/mobile-phones/detail/huawei-y6-benl.htm
thanks but i already downloaded it but didn't work
Related
Hello,
Recently I got a Samsung Galaxy S2, although I bought it in China. So the firmware I have on it (ZCKG4) is the default firmware giving me Chinese apps and localized settings.
This shouldn't be a problem, although I can't put in Google accounts so, I figured I need to change the firmware some how.
First off is this possible?
If so how?
Thanks.
Just download any firmware and flash it via Odin, simple. You can get the firmwares from here,
http://forum.xda-developers.com/showthread.php?t=1075278
OR
www.samfirmware.com
Regards.
Hi,
I just tried to update my ZCKG4 firmware to XWKF3 but with no luck. The Chinese version seems to lock-up if you do this. You will get a brick every time. I managed to get back to ZNKG5 (no ZCKG4 available).
How to get around this? Will rooting help?
It doesn't brick, it just boot loops. This is normal.
Normally when you crossflash to another firmware, it gets stuck on the Samsung Logo, and loops.
If you are using stock firmware of another country. Just do the following.
1) Turn off the phone
2) Goto Recovery mode (Power + Volume Up + Home)
3) In SAMSUNG's recovery, factory reset it. (Wipe DATA+CACHE)
4) Reboot.
If should work after that.
If you are using 3rd party kernel, which has Clockwork Recovery built in, you cannot use that to erase userdata+cache to factory reset as it will cause boot loop again.
Some Advise:
Always make sure your computer is not having problems before flashing. Run memtest86 to make sure RAM data is not getting corrupted.
Instead of downloading stock ROM from forums, you can download official stock rom using fus downloader
When using ODIN, never repartition, unless you know what it is for.
Hello,
Thanks for the replies, although I am still having trouble.
So I downloaded another firmware and used Odin to install it. Although each time it arrives at failure and either makes the device become corrupted (Although it can be fixed by rooting it) or nothing happens.
So I've found I can root the device fine, although every time I attempt to install another firmware nothing happens and I can't install it.
I've been looking on the forums and found this thread: http://forum.xda-developers.com/showthread.php?t=1192575 and apparently the Chinese SGS2 firmware uses a different format?
Could someone confirm this as at the moment I'm pulling hair out by the minute trying to get the Android Market to appear as well as be able to put in my Google Account details.
Please help
Thanks.
Hi
any help in this case?
i have same problem and do not know how to solve it.
BR/Artur
DUDE!!!
I think i got some good news.
I have the same problem with my new S2 bought in China, no Android market. I've been searching all around the web to try to fix it.
It is still not working for me, but i got a little bit farther though.
I find the hint here
http://forum.xda-developers.com/showthread.php?t=1351283
So what i did and what you can try is:
1) Install GoogleServicesFramework.apk
This seems to be the issue, as when you install it you can see the permissions Google requires, and pretty much says the can access ALL the data in your phone. (It would explain the censorship)
2) Install Android Market with any .apk you can find
3) Launch Android Market
The change for me is i can now input my account login. But it still fails connecting to google to actually login. Maybe because i'm still in china and it blocks the connection.
Could any one try this outside china and tell me if it works?
Cheers
Hello, after playing with a tablet I got boot loop so below is solution for this.
This is what I wrote first:
I purchased Chinese tablet called CyberNav, there is link to the website with specs http://www.dracotek.com/cybernav-7-...ps-navigator-ultra-slim-wifi-8gb-gps70yw.html It works great and is worth the money. I received- on request- firmware for it, but it is with .img extension and I have no idea how to get to the files. Attached application PhoenixCard should install it on sd card but it does nothing. So there is my question- can anyone help me with it? Possibly root it? Or update to newer firmware version? I'll post a link to, just need to upload it to my dropbox on my next break at work.
Sek
im pretty sure you need a 3rd party application to flash that firmware, i think you load the .img file into the software on your pc, connect tablet in flash/recovery mode then flash it that way, dont know which software you would need to use though , sorry i cant help further
There is link to rar package http://db.tt/jm7eHfbq
If there is someone who wants to spend some time... Please help.
Bump
Some new infos:
As far I found out tablet is detectable during boot in adb, but it stays in boot loop. I think I've got right usb drivers.
I tried unyaffs the .img file using C:/unyaffs/unyaffs pw08.img but it shows file corrupted (might be wrong method?).
Logcat attached.
Maybe there is someone who will find what it's missing...
I see there is nobody who can help me, so... If some of u have similar problem with chinese tablet- bootloop, can't flash it with LiveSuit our update from sdcard, I found solution which worked for me. Using adb, pulled catalog /dev/data/ to hard disk, then deleted all dalvik cache, installed by me apps and almost every other file from /data on my hard disk. Then typed adb remount, then adb shell rm -r /dev/data/* to delete all data catalog on tablet. Then pushed /data catalog from my hard disk to tablet, and finally adb reboot. And it WORKS! Booting without problems. I wasted 4 days on research how to turn it in flash mode etc. But it was very simple.
Cheers
Sek
Hi, sek111
It was necessary to use the LiveSuite to flash through usb.
Thank you very much, from your post, I found the firmware for my tablet.
An experience with another low cost tablet with Bootloop
I happen to got my tab (Wammy from WickedLeak.org) stuck in BootLoop and was struggling to get a way out for the past 3 days, checking almost all of the posts for this issue!
The tab would stuck on the android loading animation despite running for 2-3 hours and after several hard reboots, it throw-ed following error-
Encryption Unsuccessful
encrytion was interupted and cant complete. as a result the data on your tablet is no longer accessible
to resume using your tablet, you must perform a factory reset. when you set up your tab after the reset, u'll hav an opportunity to restore any data that was backed up to ur google account
Click to expand...
Click to collapse
Despite going for the factory reset, it still didn't workout as the reset activity never completed or proceeded. I happen to be a beginner/noob and was trying my luck with possible solution but was comfortable with ADB stuff and workaround. Well i checked the solution which sek111 offered in this post and it was most closely helped me out. So i would like to Thank him a ton for sharing his solution.
Another method for few others if you don't get through the technical stuff and handling all the flashing tools, i was successful in bringing up the setting window of my tab and chose to do Reset via GUI which worked. Actually my battery got drained out to 7% and a popup message for same displayed while i was on the above error page. I selected the "check battery" option from that pop up and got my way out via factory "Backup and Reset" option under settings.
I hope this might help few people if not all! But the XDA forum is great and everyone will find a solution here. Cheers!!!
So I got this wm8850 chinese generic tablet. The camera is in the front in the middle (wide). It was shipped to me with 4.0.3 in boot loop. I soon found out that it boots into safe mode when I usb to pc. This is the furthest I've gotten with it so far. I can adb into it and have already tried to wipe data. It seems like since its from factory screwed up that a may need to reload the firmware or the os or something. Im kind of a noob because I only have my droid x. I've gotten it out of a boot loop before but I also knew what I had done to cause it so I fixed it. I tried to follow seks adb commands but im too noob to do it I guess. I was able to wipe data and dalvik-cache. Issue still occurs . If anybody can give me some adb commands than can help I would greatly appreciate it. Im fairly sure that I found the firmware elsewhere on xda. I thank you guys for any help at all you can give. I don't wanna send it back without trying everything software related as I can, but ill send it back if I can't fix it or if I brick it
Sent from my DROIDX using xda app-developers app
i have same problem in my china mobile.. dupad k1 ... after in installed new boot screen, device stuck in boot... please help to recover my device in step by step....
This problem probably has shown up a lot and usually I would take my time to look around before asking but I'm feeling lazy so here goes:
I recently put in a new-ish ROM (it's am US stock type ROM that I found on here) and all works well except for one thing - the CWM refuses to load. At first I was getting the dead android with the red triangle sticking out and so I decided to use ROM Manager to flash CWM again. Might have been a bad move since I'm still fairly noob-ish but anyhow it didn't work. Now whenever I try to go in it just freezes. If I try manually it shows the RCK box, android box, etc and just stays there. When I try to do it through ROM Manager it stays at the first ASUS logo. Can someone refer me to a guide I could follow or even give me a solution to fix this? I will be very grateful. Thank you in advance.
Hello,
I wish I could explain my problem quickly and clearly, but I lost count on the amount of times I wiped, flashed and reset my Tablet so... I just hope someone comes up with a genius idea, because I'm desperate. I've tried everything.
Today I decided I wanted to try and find a better ROM I could install on my Ainol Tablet, and after doing some research I found out there was a 10.1 version of Cyanogenmod that was apparently quite popular.
I followed a tutorial I found on slatedroid.com (Flashed CM 10.1, Gapps and compatibility file) and only after I found out I just flashed a ROM built for the previous model of my tablet. When I reset it it came up as if it had done a Factory reset (same firmware but everything came up in chinese).
Then I went on and managed to find a tutorial for mine; repeated the process.
Right after doing that I re-read the tutorial (I would love to attach the link but I am a new user and am not allowed to...) and realised I was supposed to update my stock firmware to the latest version before flashing CM on it (apparently so they had the same kernel). Luckily, I had made a backup with TWRP so I went back to it and went looking on my PC for said firmware.
When I managed to find it, I realised the wifi on my tablet was gone. Whenever I switch it on, it goes back off after a few seconds. So no internet.
Then I thought I could just get that update file from my PC and copy it through USB. But that wasn't working either, my laptop will not recognise it whenever I plug it. The tablet won't even recognise a USB flashdrive.
Lastly, I realised there was a miniSD card port so I tried getting the file in through that as well. In this case, the tablet displayed a "preparing SD card" message but nothing happened afterwards...
I'm completely stuck. I have tried several times going back to Factory settings through TWRP, or reloading that backup I made, erasing Dalvik/Cache every single time, but the problems are still there. Everything else seems to be working though...
I did some research and it does look like I flashed a ROM with the wrong kernel so all the drivers are gone... (When the tablet is off and charging it displays a battery that used to stand vertically. Now it comes up horizontally...).
If that was the case, would anyone have any clue on anything I could do to fix it? Any files I could get rid of? Or maybe some secret menu on TWRP I haven't taken into account...?
Any ideas would be extremely appreciated. Please help! :'(
Thanks in advance.
Hi All,
I have a Huawei Enjoy 7 - Model SLA-LA00 (running Nougat 7.0, EMUI 5.1, Boot is unlocked).
I'd like to root it, but I've tried Kingoroot, King Root, iRoot etc and it repeatedly fails. On checking it seems that my device isn't compatible with those apps. I would like to use the ADB method, but there's no custom recovery image for the SLA-LA00, I've also checked and it seems, there isn't but please correct me if I'm wrong.
Is there a custom recovery available for my model?? Also, I've tried looking but, is there an International firmware for this model??
Any assistance would be appreciated, thanks.
Regards,
marquez010
Hello, was going to create a new thread, but think yours fits what I need to ask aswell.
Same phone here, bought it in Shanghai and now in Brasil, was trying just to make it google able. Salesman at the official Huawei store tricked me to think it would just need access to a open network for it to work. Silly me.
Well, as you, unlocked it with ADB and with no answers from nobody, tried to flash it with a random TWRP. Obviously didn't work. Now the phone wont boot into system, but i still can manage to put it in fastboot mode and it still replies to ADB.
Question is if someone that knows better than me can tell me what to do to at least get back where I was, before I finish killing this damm stupid phone, wich also doesn't seem such bad idea.
lucasresende said:
Hello, was going to create a new thread, but think yours fits what I need to ask aswell.
Same phone here, bought it in Shanghai and now in Brasil, was trying just to make it google able. Salesman at the official Huawei store tricked me to think it would just need access to a open network for it to work. Silly me.
Well, as you, unlocked it with ADB and with no answers from nobody, tried to flash it with a random TWRP. Obviously didn't work. Now the phone wont boot into system, but i still can manage to put it in fastboot mode and it still replies to ADB.
Question is if someone that knows better than me can tell me what to do to at least get back where I was, before I finish killing this damm stupid phone, wich also doesn't seem such bad idea.
Click to expand...
Click to collapse
Hi , all you have here :
https://www.getdroidtips.com/huawei-enjoy-7-b161-nougat/
Hey, thanks a bunch. Found that post before, but it looks like its for an older version of this phone. Mine was running b190 nougat. Don't know if should try to flash this one, but if no other ideas, will try it.
Well, was able to boot it again. Flashed it with yet another twrp that i found for a similar (or so i think) huawei and even tough it didn't work, when I connected the phone to the charger and it responded the power up volume combination and allowed me to reboot normaly.
Guess I'm back to where I started. Think now is better to wait, maybe there wiil be a moe suitable release of a gms core package that it requires for google play to work (have it, but installation fails on rebbot) or twrp updates with a version that works for me and then I can try to install gapps thru it.
Back to my old crappy lg now.