All About Redmi 3 Family
If you are satisfied with my work please make a donation
Bitcoin : 169cZB6dmrbFZBwJpS4gjawUQdhhxZpWNz
U can ROOT them and U can flash XPOSED !
Roms For Redmi 3/Pro and Redmi 3S/3X(MIUI 7&8)[Official/Unofficial Global ROM]
For both Locked and Unlocked bootloaders
Please report the bugs For Redmi 3/Pro HERE
Please report the bugs For Redmi 3S HERE
Please report the bugs For Redmi 3X HERE
I am not responsible for any damage you may cause So
Do it at your own RISK
Code:
[SIZE="3"][CENTER][B][COLOR="red"]***If you dont wanna unlock your bootloader but need Root and TWRP Please flash SpaceX ROM***
**Remember by flashing SpaceX U cant Unlock your bootloader(it will stop at 50%) till you reflash Stock China Dev ROM**
*I recommend U Flash the least China Dev ROM and Unlock your Bootloader first
and flash xiaomi.eu ROMs (anyway as you wish!)
[If You are running SpaceX ROM and wanna unlock your bootloader check section "How to Unlock bootloader" ]
[/COLOR][/B][/CENTER][/SIZE]
Xiaomi Redmi 3 Pro - Bend test, Scratch test, Burn test - Durability video : Be Proud of your phone
Its better than Mi5 !!!!
Video Link
Download ROMs :
Redmi 3/Pro
Redmi 3/Pro Locked Bootloader: [SpaceX][MIUI7][Stable][6.5.12] Link
Redmi 3/Pro Locked Bootloader: [SpaceX][MIUI8][Weekly][6.7.7] Link
Redmi 3/Pro Unlocked Bootloader: [xiaomi.eu][MIUI7][6.5.25] Link [Please Download HM3]
Redmi 3/Pro Unlocked Bootloader: [xiaomi.eu][MIUI7.5][Stable] Link [Please Download HM3]
Redmi 3/Pro Unlocked Bootloader: [xiaomi.eu][MIUI8][Stable] Link [Please Download HM3]
Redmi 3/Pro Unlocked Bootloader: [xiaomi.eu][MIUI8][Weekly] Link [Please Download HM3]
Redmi 3/Pro Unlocked Bootloader: [Thunder ROM][MIUI8][Weekly] Link
Redmi 3S/3X
Redmi 3S/3X Locked Bootloader : [SpaceX][MIUI8][Weekly]
Redmi 3S/3X Locked Bootloader : [Stock][MIUI7.5][Stable][Global] Link
Redmi 3S/3X Unlocked Bootloader: [xiaomi.eu][MIUI8][Weekly] Link [Please Download HM3SHM3X]
Redmi 3S/3X Unlocked Bootloader: [xiaomi.eu][MIUI 7.5][Stable] Link [Please Download HM3SHM3X]
How to Update SpaceX ROM with Locked Bootloader [Redmi3/Pro]?
As far as U know its not possible to update the Space X via OTA so I bring u a way to update your ROM to least version of MIUI8 even with LockedBootloader(Do it at your OWN RISK)
According to reports :
Anybody Who flashed SpaceX 6.7.7 with Locked Bootloader can update to least MIUI 8 !
For safety matters (for example: Quadroot Vulnerability) and more features its logical to do it !
Description and Download Link : LINK1 &LINK2
Please tell me about it
Push Thanks If You liked it :good::good:
How to Unlock the Bootloader?
1. (Important) Backup your data and store them out of the phone
2. (Very Important) Download and flash the least China Dev ROM Here >>> Flashing Guide
*( before downloading , think about the way you wanna flash it ! )
3. And read this (*ignore note 3 ! its the same method for Redmi3)
*** If You are running SpaceX and Try to Unlock the bootloader it will stop at 50% but I solve it > here we go:
1. Download the least FASTBOOT China Dev ROM here
File name : Redmi 3 Latest China Developer Version Fastboot File Download
2. Download Adb/Fastboot and install it on Windows 7 (64bit recommended ) link
3. Download MiFlash ( MiPhone20151028.exe) Link and install it on the Windows 7 (Allow all the Drivers instillation)
4. Reboot the PC
5. at Phone :Go to Developer options and Enable "Enable OEM unlock" , "USB debugging" and "Fastboot mode"
6.at Windows : Extract the FASTBOOT China Dev ROM in a newfolder and extract the contained file with 7-zip app
in the extraction area u got to see some files and a folder named : "image(s)"
7. Run Miphone and select extraction area folder (not images folder)
8. Turnoff the phone and hold vol- and press power button till u see the FASTBOOT logo
9. Plug USB cable to the phone and let windows detect the phone after that refresh the Miphone and it has to detect your device make sure that are address the folder correctly
and select "Flash all" in MiFlash then press flash and sit tight [ never ever disconnect the phone during flashing or you may lose it for ever better to use a laptop for power disconnection matters ]
when flashing is done the phone reboots itself and takes around 10 minute to boot up
after that login to your Mi account and do this (*ignore note 3 ! its the same method for Redmi3)
How to Flash Recovery [Redmi 3/Pro] ( TWRP )?
You need to unlock the bootloader first (see section "How to Unlock the Bootloader")
[f you are running China Dev ROM skip this part](Very Important) Download and flash the least China Dev ROM Here >>> Flashing Guide
*( before downloading , think about the way you wanna flash it ! )
.
.
***Check the Bootloader status ***
Code:
fastboot oem device-info
If its relocked dont worry Just Unlock it with the Miflash Unlock tool !
.
.
1. Download the least Version of TWRP here
2. Download Adb/Fastboot and install it on Windows 7 (64bit recommended ) link
3. Download MiFlash ( MiPhone20151028.exe) Link and install it on the Windows 7 (Allow all the Drivers instillation)
4. Reboot the PC
5. In order not to end up with bootloop you got to active China Dev ROM root @ Security app > Permissions > Root (you need internet connection for that) Phone phone reboots and takes 10 minute to bootup
6. Go to Developer options and Enable "Enable OEM unlock" , "USB debugging" and "Fastboot mode"
7. Connect your phone to the PC with USB cable and Run CMD (as administrator) (serach CMD in windows 7 Start)
8.At CMD type
Code:
adb root
and wait a while
then type
Code:
adb disable-verity
almost done !
9. Turn off the phone and turn it on while you are holding both POWER and VOL(-)[down] together it has go to FASTBOOT
10. Rename the downloaded recovery to "twrp.img" and Create a new folder in desktop and move the twrp.img in to it
11. At the new folder Hold SHIFT button of keyboard and press Right key of mouse (a menu pops out) select "Open command window here"
12. at the command window type
Code:
fastboot devices
13. if you see any registered device(if not do step 2&3 again or try on another windows)go for final step type
Code:
fastboot flash recovery twrp.img
wait a while then type
Code:
fastboot boot twrp.img
after that u will find yourself at TWRP!
U can do what ever u want now!
14. It's DONE !!! U got 2 options to go to the recovery
First > (Setting>About phone> System updates > upper right 3-dots menu > "Reboot to Recovery mode")
Second > (Hold Power and vol+ together while the phone is off)
:good::good:Press thanks if it was awesome! :good::good:
How to Flash Recovery [Redmi 3S/3X] ( TWRP )?
1. Unlock your bootloader ( see section"How to Unlock the Bootloader" )
2. Download Adb/Fastboot and install it on Windows 7 (64bit recommended ) link
3. Download MiFlash ( MiPhone20151028.exe) Link and install it on the Windows 7 (Allow all the Drivers instillation)
4. Reboot the PC
5. Install TWRP Recovery with TWRP Installer Tool: Here
6. Phone will automatically boot into recovery mode.
Swipe to allow modifications.
Browse to Advanced setting and Disable dm-verity. (If You dont do that the phone ends up with bootloop)
How to Unbrick Redmi 3 ?
for all of possible conditions you need these stuffs so bring them up before you start unbricking the phone
1. Download Adb/Fastboot and install it on Windows 7 (64bit recommended )
2. Download MiFlash ( MiPhone20151028.exe) Link and install it on the Windows 7 (Allow all the Drivers instillation)
3. Reboot the PC
We have a different scenarios:
a) The phone boots up and stock in MI logo (softbrick)
a2) The phone boots up and stock in MI logo and android animation (softbrick)
a3) The phone boots up and reboot itself (softbrick)
a4) The phone does not boot up but it respond while plugging charger (softbrick or hardbrick)
b) The phone does not boot up and its not respond while plugging charger (hardbrick)
For Scenario( a & a2 & a3 & a4 )
*** If you have unlocked bootloader try to flash TWRP and reflash a stable rom (like xiaomi.eu)
*** For lockedbootloader :
Hold power button till phone restarts as quick as possible hold vo(+) so that phone can go to bootloader Try to reflash the ROM in download mode
Watch the video
What you need :
1. ROM Download
2. MiFlash
3. Do what exactly the Video says
For Scenario B (Hard Brick! ):
first of all make sure your battery has enough charge
1. Download the least FASTBOOT China Dev ROM here
File name : Redmi 3 Latest China Developer Version Fastboot File Download
2. Download Adb/Fastboot and install it on Windows 7 (64bit recommended ) Link
3. Download MiFlash ( MiPhone20151028.exe) Download and install it on the Windows 7 (Allow all the Drivers instillation)
4. Download and install THIS1 & THIS2 then Reboot the PC
5.at Windows : Extract the FASTBOOT China Dev ROM in a newfolder and extract the contained file with 7-zip app
in the extraction area u got to see some files and a folder named : "image(s)"
Now be ready for the phone...
Keep press vol(+) and vol(-) together (make sure U do it !! press harder dont worry!!!! ) (dont leave them ! )and then press power button till U see a blank page,The phone is on ... U can see the background LED lights (THE PHONE IS IN THE FACTORY PROGRAMMABLE MODE)
now
7.Run MiPhone (or MIflash) Plug USB cable to the phone and let windows detect the phone after that refresh the Miphone and it has to detect your device (U see the phone is detected ... if not do part 3 and 4 another time or try on another win7 64bit) and select extraction area folder and select (images folder)
and select "Flash all" in MiFlash then press flash and sit tight [ never ever disconnect the phone during flashing or you may lose it for ever better to use a laptop for power disconnection matters ]
If u got an error (TELL ME ABOUT THE ERROR)dont worry
8.Run Miphone and select extraction area folder (not the images folder this time select the root folder! )
and select "Flash all" in MiFlash then press flash and sit tight [ never ever disconnect the phone during flashing or you may lose it for ever better to use a laptop for power disconnection matters ]
It takes around 300-400 s to flash
When its done press power key for seconds and it resets
U are ok now ! ( wait around 20 min to see the least MIUI8 )
Please Keep me Update!
How to use semi-QuickCharge ?
Caution :
Redmi 3/Pro stock kernel do not support QC but it can use maximum 1.6 A of 2.0 A .
but why is that ?
according to battery safety policy it cant be so warm during charging so PMU will decrease the current in order to make the battery cooler. it s kinda related to PMU parameters ( some kernels can modify that unfortunately Redmi 3/pro stock kernel do not support PMU modification )
so how could I reach 1.6A ? ( in normal operation you may reach to 0.8 A)
***flash the least version of MIUI 8 first***
1. Install ampere app
2.Turn on Airplane mode
3.Force stop all background app
4.Run Ampere and plug the charger
5.Use the stock adapter (5V @2A) and stock cable
6.Try to cool it down while its charging ! ( I used Ice pack for that) (dont cool it so much keep it around 20 Celsius degree or you may damage the battery )
7.Then you reach 1.6A current (in the optimum situation)
*** Simply ! Try to keep the phone cool while its charging ! ***According to sciences You cant charge the phone [0 to 100] less than 160 Minutes!
So dont blame the phone!
Try to create a new kernel !
Dont Forget to Thanks :good::good::good:
Root:
*First of all You need to Unlock your bootloader and flash TWRP
(See section "How to Unlock bootloader" and "How to Flash Recovery")
1. Download Stable or the least Super su "link"
2.Store the downloaded zip file into phone
3.Reboot to recovery (Setting>About phone> System updates > upper right 3-dots menu > "Reboot to Recovery mode")
@ Recovery :
1. Allow system modification
2. Install Supersu zip
3. Reboot
4. Now You have access to Super su features
Xposed For MIUI 8 (SDK22) Arm64[Both Locked and unlocked BL] :
***First Flash the least version of Supersu with TWRP *** "[Link]"
1.Download XposedInstaller_3.0-alpha4 and install it [Link]
2.Download Xposed For MIUI 8 (SDK22) Arm64 and move it to SD [Link]
2*.Download Xposed Uninstaller and move it to SD [Link]
3.Reboot to recovery (Setting>About phone> System updates > upper right 3-dots menu > "Reboot to Recovery mode")
then Flash Xposed For MIUI 8 with TWRP
4.Reboot (may takes time to boot up)
5.If anything goes wrong Flash Xposed Uninstaller and reboot
Screenshots:
COMING SOON ...
Tweaks (More Battery and Performance) :
I've Started New Project (BT4A)
Check it out LINK [UPDATED] [/B]
Bugs:
- No LTE for some users NOT FIXED YET!
- Brightness changes to its default value by cleaning the recent apps
Temp FIX: Turn on reader mode and choose "Selected apps" . but don't select any app in it ... DONE !
How to Flash the ROM ?
(you may lose your data storing on internal storage after flashing so back up your data first and keep them out of phone !)
Locked Bootloader:
Watch the video
What you need :
1. ROM ( You got from Download section)
2. MiFlash (Download MiPhone20151028.exe) Link
3. Do what exactly the Video says
Unlock bootloader:
1.Move the Downloaded ROM to SD
2.Do a factory reset
3.Do a clean Flash of the Downloaded file with TWRP Recovery
Remember First Boot takes time please be patient
Don't Forget to
push Thanks bottom
:good: :good: :good: :good:
XDA:DevDB Information
ROMs For Redmi3/Pro/S/X, ROM for the Xiaomi Redmi 3
Contributors
adblocker
ROM OS Version: 5.1.x Lollipop
Version Information
Status: Stable
Current Stable Version: 8.0.2
Stable Release Date: 2016-09-01
Current Beta Version: 6.10.27
Beta Release Date: 2016-10-28
Created 2016-06-28
Last Updated 2016-10-28
thanks dude for ur work. i wanna ask u something, what is the difffrent about your rom with xiaomi.eu build. look like its have same feature? correct me if im wrong. thanks in advice
sorry for my bad english
So far this is the cleanest rom I've used, liking it.:good:
tpetran said:
So far this is the cleanest rom I've used, liking it.:good:
Click to expand...
Click to collapse
what about fingerprint?
Mahut said:
what about fingerprint?
Click to expand...
Click to collapse
don't know, I have plain Redmi 3
Mahut said:
what about fingerprint?
Click to expand...
Click to collapse
Working
check the bug section
iModStyle said:
thanks dude for ur work. i wanna ask u something, what is the difffrent about your rom with xiaomi.eu build. look like its have same feature? correct me if im wrong. thanks in advice
sorry for my bad english
Click to expand...
Click to collapse
Please check the feature section
thanks for providing this rom since i got bootstuck after flashing twrp. it saved my phone
btw how to activate lte on this rom? i already changed through *#*#4636#*#* lte only but no changes, still stuck at wcdma preferred.
any help would be appreciated
thanks
I'll use this rom if lte issues solved.. Thx
28/06/2016
23:05: Flashing ...
23:25: Flashed, booted, configured - now testing
00:30: Everything looks so far so good. I am currently not using any SIM Card. Wifi is stable, translations are good, ROM is fast and responsible. FM Radio is working great.
00:35: I compared the Stock ROM NON-HLOS.bin with the NON-HLOS.bin of this build. They are identical. I hope to get a Indian NON-HLOS.bin to compare with my stock rom version to figure out how to enable LTE Band 20, which is very important for germany. Any hint is very welcome!
08:00: Flashed SuperSU latest build with TWRP, working great here.
Conclusion so far:
- ROM is very stable (out of the box), no crashes so far
- ROM is very fast. Booting is a lot faster than any other ROM before and feels very smooth. Congrats!
GoodSoul said:
28/06/2016
23:05: Flashing ...
23:25: Flashed, booted, configured - now testing
- Looking great so far.
Question(s):
- When I boot to recovery and allow "modifications", is my system then broken (bcs. I am on a unlocked bootloader)?
Click to expand...
Click to collapse
i think not cz before installing this rom my stock dev rom is broken then i flash this rom and it works great for me unless the lte
papazz23 said:
i think not cz before installing this rom my stock dev rom is broken then i flash this rom and it works great for me unless the lte
Click to expand...
Click to collapse
Did you have LTE before flashing this ROM? Bcs. NON-HLOS.bin is the same as on the Stock ROM.
adblocker said:
Please check the feature section
Click to expand...
Click to collapse
ok may i was wrong, but when i check link for unlock it show build from xiaomi.eu sir. sorry if im wrong (again) i wanna taste ur rom and report the result here hehe. thanks for answering.
iModStyle said:
ok may i was wrong, but when i check link for unlock it show build from xiaomi.eu sir. sorry if im wrong (again) i wanna taste ur rom and report the result here hehe. thanks for answering.
Click to expand...
Click to collapse
The unlocked bootloader is the same as .eu
New Bug (maybe) :
Have U guys notice any thing wrong about Auto Brightness ?
Sometimes it freezes on 20 % till u lock and reopen the phone !
Please tell me about Any weird thing in the Rom
GoodSoul said:
28/06/2016
23:05: Flashing ...
23:25: Flashed, booted, configured - now testing
Question(s):
- When I boot to recovery and allow "modifications", is my system then broken (bcs. I am on a unlocked bootloader)?
Click to expand...
Click to collapse
When I boot to recovery and allow "modifications", is my system then broken (bcs. I am on a unlocked bootloader)?
No , Its functional
Flash Super su with that (link in description)
adblocker said:
No , Its functional
Flash Super su with that (link in description)
Click to expand...
Click to collapse
It is working, thnx. But for Xposed I still needed a unlocked BL, correct?
adblocker said:
New Bug (maybe) :
Have U guys notice any thing wrong about Auto Brightness ?
Sometimes it freezes on 20 % till u lock and reopen the phone !
Please tell me about Any weird thing in the Rom
Click to expand...
Click to collapse
i thin it's from the miui 8 itself cz i used to face it when in stock dev miui 8. if you can fix it would be awesome
GoodSoul said:
Did you have LTE before flashing this ROM? Bcs. NON-HLOS.bin is the same as on the Stock ROM.
Click to expand...
Click to collapse
lte on the previous stock dev rom works well. it's weird that i can't lock it to lte, but the others are good 'wcdma only' and 'gsm only'.
adblocker said:
The unlocked bootloader is the same as .eu
Click to expand...
Click to collapse
oh i see, thanks sir for ur answer
iModStyle said:
thanks dude for ur work. i wanna ask u something, what is the difffrent about your rom with xiaomi.eu build. look like its have same feature? correct me if im wrong. thanks in advice sorry for my bad english
Click to expand...
Click to collapse
The made by ManhIT does not require you to unlock your bootloader, has no Chinese apps, etc. Check this post and the whole thread.
tpetran said:
So far this is the cleanest rom I've used, liking it.:good:
Click to expand...
Click to collapse
True that, if you probably exclude CM, because this one still holds MI account and other few similar things (which I never user for instance).
iModStyle said:
ok may i was wrong, but when i check link for unlock it show build from xiaomi.eu sir. sorry if im wrong (again) i wanna taste ur rom and report the result here hehe. thanks for answering.
Click to expand...
Click to collapse
You should go for the ManhIT build for sure. It is build after the xiaomi.eu but it is tweked a bit.
adblocker said:
The unlocked bootloader is the same as .eu
Click to expand...
Click to collapse
Not sure what you mean but I can confirm that my bootloader is locked even with the ManhIT version, which is not an official build like the one found at xiaomi.eu
BTW the OP for the SpaceX by ManhIT is http://choimobile.vn/threads/locked...-6-23-khong-can-unlock-booloader-26-06.66360/
Related
HELP ! HELP ! HELP !
hard bricked by flashing a miui rom from twrp without deleting the emmc file :crying::crying::crying::crying::crying::crying:
i can only go to fastboot , no recovery , miui logo for 3 seconds
please someone help me !!! :crying::crying:
will the test point work ?
Edit :-
Thank you all , i managed to unbtick using test point .!!
I know enough to tell you that I'd you can get fastboot yo work, its not bricked. Honestly I don't own the device. I own lg g3. And it might be different for this device but you can try pushing recovery from fasyboot mode using your PC. You might wanna google how to tbh and ask around ppl with similar device if possible. Pushing through fastboot/adb is most common so pushing recovery will format recovery partition and install/push new one. That will get you working recovery. (I hope). Happy flashing.
In fastboot check if bootloader is locked by running the device info command... It is not locked you have hopes... Use fastboot to flash fastboot rom package with modified emmc file and modded image...
Its locked
Only way is to do test point method or take it to a service center
#BATMAN# said:
HELP ! HELP ! HELP !
hard bricked by flashing a miui rom from twrp without deleting the emmc file :crying::crying::crying::crying::crying::crying:
i can only go to fastboot , no recovery , miui logo for 3 seconds
please someone help me !!! :crying::crying:
will the test point work ?
Click to expand...
Click to collapse
try 1. this:http://en.miui.com/thread-235865-1-1.html
2. http://en.miui.com/thread-244814-1-1.html
3.http://en.miui.com/forum.php?mod=viewthread&tid=257227&highlight=test%2Bpoint%2Bredmi%2Bnote%2B3
4.http://en.miui.com/thread-245347-1-1.html
Let me know if you have succes!Good luck!
Luiggi79 said:
try 1. this:http://en.miui.com/thread-235865-1-1.html
2. http://en.miui.com/thread-244814-1-1.html
3.http://en.miui.com/forum.php?mod=viewthread&tid=257227&highlight=test%2Bpoint%2Bredmi%2Bnote%2B3
4.http://en.miui.com/thread-245347-1-1.html
Let me know if you have succes!Good luck!
Click to expand...
Click to collapse
im trying now , thank you , i will tel the results
didnt work , and i didn't try the testpoint yet because im afried , can some one help me
*when connect via fastboot it shows android bootloader interface ( im new to adb someone helpme with this )
*when connect holding ( volume up+volume down+power ) it shows =HS-USB diagnostics 900E ( i manually updated this driver to 9008 but mi flash dosent show it )
*when trying to flash via fastboot it says "FAILED : remote ; device is locked"
faced the same problem bro better give it in care if dnt wnt to give it to care just go to( http://en.miui.com/thread-235865-1-1.html ) or try ( http://xiaomitips.com/guide/fix-bricked-redmi-note-3-no-unlock-permission/ ) this if all didnt work go to care bro
#BATMAN# said:
im trying now , thank you , i will tel the results
didnt work , and i didn't try the testpoint yet because im afried , can some one help me
*when connect via fastboot it shows android bootloader interface ( im new to adb someone helpme with this )
*when connect holding ( volume up+volume down+power ) it shows =HS-USB diagnostics 900E ( i manually updated this driver to 9008 but mi flash dosent show it )
*when trying to flash via fastboot it says "FAILED : remote ; device is locked"
Click to expand...
Click to collapse
Steps:
A).On the computer in windows disable driver signature enforcement featrure and turn off any protection like security suites,AV software or firewalls.To disable driver signature enforcement you must open command prompt and type:a)bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS and press enter
b)bcdedit.exe -set TESTSIGNING ON and press enter
c)reboot computer
d) install MI flash after reboot;download it from here :http://en.miui.com/thread-235865-1-1.html
B) On the phone:
1.Hold Vol - and Vol + and plug Usb cable in computer&phone
2.download ADB files from here http://en.miui.com/thread-235865-1-1.html
3.extract files from archive to folder
4. in this folder,where you have extracted adb files press:shift on keyboard and right click on the mouse in the same time and choose "open command window here"
5.in command window type:a)adb devices and press enter
b)adb reboot edl and press enter
Now you are in download mode
6.from device manager install qualcomm driver;it should be seen in other devices section;right click---update driver----navigate to :C/Program files(X86)/XIaomi/Mi flash/Qualcomm/Driver;Note:you need x64 windows computer for this operation
7.start MI flash---right click and run as administrator;browse for rom folder,you need a fastboot rom(the rom need with suffix tgz to be;not zip).Put the tgz archive(rom) in Local Disk C and extract with winrar!!!!!!(use winrar) to folder;rename the created folder to ROM.In MI flash when do browse for folder SELECT ENTIRE FOLDER NOT JUST THE FOLDER IMAGES.OK?
8.in MI Flash window press refresh button from up side;the device should appear on the list
9.in MI Flash windows in the down side of windows tick the litlle circle who say:Flash all
10.Press flash button from up
1.1. Wait until it finish flashing procedure:should appear in the right side from device peration completed succesfully
12.Remove usb cable and press power button on the device;keep the power button pressed until the device give you a vibration,the release it
Luiggi79 said:
Steps:
A).On the computer in windows disable driver signature enforcement featrure and turn off any protection like security suites,AV software or firewalls.To disable driver signature enforcement you must open command prompt and type:a)bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS and press enter
b)bcdedit.exe -set TESTSIGNING ON and press enter
c)reboot computer
d) install MI flash after reboot;download it from here :http://en.miui.com/thread-235865-1-1.html
B) On the phone:
1.Hold Vol - and Vol + and plug Usb cable in computer&phone
2.download ADB files from here http://en.miui.com/thread-235865-1-1.html
3.extract files from archive to folder
4. in this folder,where you have extracted adb files press:shift on keyboard and right click on the mouse in the same time and choose "open command window here"
5.in command window type:a)adb devices and press enter
b)adb reboot edl and press enter
Now you are in download mode
6.from device manager install qualcomm driver;it should be seen in other devices section;right click---update driver----navigate to :C/Program files(X86)/XIaomi/Mi flash/Qualcomm/Driver;Note:you need x64 windows computer for this operation
7.start MI flash---right click and run as administrator;browse for rom folder,you need a fastboot rom(the rom need with suffix tgz to be;not zip).Put the tgz archive(rom) in Local Disk C and extract with winrar!!!!!!(use winrar) to folder;rename the created folder to ROM.In MI flash when do browse for folder SELECT ENTIRE FOLDER NOT JUST THE FOLDER IMAGES.OK?
8.in MI Flash window press refresh button from up side;the device should appear on the list
9.in MI Flash windows in the down side of windows tick the litlle circle who say:Flash all
10.Press flash button from up
1.1. Wait until it finish flashing procedure:should appear in the right side from device peration completed succesfully
12.Remove usb cable and press power button on the device;keep the power button pressed until the device give you a vibration,the release it
Click to expand...
Click to collapse
im trying now! hopefully it will work :good::good:
#BATMAN# said:
im trying now , thank you , i will tel the results
didnt work , and i didn't try the testpoint yet because im afried , can some one help me
*when connect via fastboot it shows android bootloader interface ( im new to adb someone helpme with this )
*when connect holding ( volume up+volume down+power ) it shows =HS-USB diagnostics 900E ( i manually updated this driver to 9008 but mi flash dosent show it )
*when trying to flash via fastboot it says "FAILED : remote ; device is locked"
Click to expand...
Click to collapse
I have the same problem.
I can get Miflash to show when under fastboot but it doesn't show the COM port but the device id similar if you check Fastboot Devices. but can't flash due to device is locked.
I tried QFIL as well but it can't go into Emergency Download Mode.
Anyone Please help.
Stuck at mi logo
Device unlocked
bootloader unlocked
twrp working
how to get rid of this
fylim said:
I have the same problem.
I can get Miflash to show when under fastboot but it doesn't show the COM port but the device id similar if you check Fastboot Devices. but can't flash due to device is locked.
I tried QFIL as well but it can't go into Emergency Download Mode.
Anyone Please help.
Click to expand...
Click to collapse
me too , im still searching for a solution ......:crying::crying::crying::crying::crying:
the only solution i found was the test point but im trying to fix it without opening my phone
i you find anything please let me know !!!!!!!!!!!!!!!!
avrrv3689 said:
Device unlocked
bootloader unlocked
twrp working
how to get rid of this
Click to expand...
Click to collapse
if you don't need TWRP and want MIUI rom try this http://en.miui.com/thread-267263-1-1.html ...
and
if you don't want miui rom flash the new aosp one
#BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY#
#BATMAN# said:
if you don't need TWRP and want MIUI rom try this http://en.miui.com/thread-267263-1-1.html ...
and
if you don't want miui rom flash the new aosp one
#BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY#
Click to expand...
Click to collapse
finlly got out of it
thanxx
can u suggest a procedure to unlock bootloader and root the device and twrp without bricking or bootloop
avrrv3689 said:
finlly got out of it
thanxx
can u suggest a procedure to unlock bootloader and root the device and twrp without bricking or bootloop
Click to expand...
Click to collapse
Read these carefully #DO AT YOUR OWN RISK#
http://forum.xda-developers.com/redmi-note-3/how-to/unlock-instruction-unlock-bootloader-t3355904
http://forum.xda-developers.com/redmi-note-3/how-to/unlock-bootloader-twrp-root-7-2-3-t3359492
http://forum.xda-developers.com/redmi-note-3/how-to/redmi-note3-prokenzo-guiderom-global-t3341102
:good: hit thanks if i helped you :good:
#BATMAN# said:
if you don't need TWRP and want MIUI rom try this http://en.miui.com/thread-267263-1-1.html ...
and
if you don't want miui rom flash the new aosp one
#BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY#
Click to expand...
Click to collapse
"BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY"
If bootloader is unlocked officially then can we flash any MIUI recovery ROM using TWRP without need of modifying Recovery ROM (deleting bootloader file , patch boot.img) ? can we switch to any MIUI ROM then easily ?
akhil17kr said:
"BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY"
If bootloader is unlocked officially then can we flash any MIUI recovery ROM using TWRP without need of modifying Recovery ROM (deleting bootloader file , patch boot.img) ? can we switch to any MIUI ROM then easily ?
Click to expand...
Click to collapse
Yes i think you can but im not 100% sure :good::good:
#BATMAN# said:
Yes i think you can but im not 100% sure :good::good:
Click to expand...
Click to collapse
Oh Lol , have asked many people but none of them are sure about this .. but i have asked from mi chat they said once bootloader is unlocked you can't lock it back by flashing MIUI roms as it's security feature . SO we can say unofficial method is problem if you like to switch to between ROM's but official one will not create any problems ..still not sure though have to ask who have done through Official method.
fylim said:
I have the same problem.
I can get Miflash to show when under fastboot but it doesn't show the COM port but the device id similar if you check Fastboot Devices. but can't flash due to device is locked.
I tried QFIL as well but it can't go into Emergency Download Mode.
Anyone Please help.
Click to expand...
Click to collapse
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
To enter in download mode see this youtube video:https://www.youtube.com/watch?v=4Fs5n3W1c8U
---------- Post added at 12:10 PM ---------- Previous post was at 12:07 PM ----------
#BATMAN# said:
me too , im still searching for a solution ......:crying::crying::crying::crying::crying:
the only solution i found was the test point but im trying to fix it without opening my phone
i you find anything please let me know !!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here: http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
How to enter in download mode see this youtube video :https://www.youtube.com/watch?v=4Fs5n3W1c8U
Luiggi79 said:
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
To enter in download mode see this youtube video:https://www.youtube.com/watch?v=4Fs5n3W1c8U
---------- Post added at 12:10 PM ---------- Previous post was at 12:07 PM ----------
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here: http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
How to enter in download mode see this youtube video :https://www.youtube.com/watch?v=4Fs5n3W1c8U
Click to expand...
Click to collapse
didn't work for me !:crying::crying:
The story begins when I had twrp. i flashed the oneplus_x_oxygenos_3.1.1_community_build usb debugging turned on, and oem unlocking. I was successful, I had stock oxygen OS but I lost twrp in doing so.
retried to install twrp, it did not work, when i tried going to recovery it's stuck on oneplus logo. i tried to fix it with this , did't notice it was for Oneplus 2, so.... hard bricked my phone, i was able to recover with this but i could not install twrp. so i installed the stock recovery MM which works now. OS does not work anymore. for some reason when i try to flash the oxygenos_3.1.1 with stock recovery, it still fails. even when i tried installing a lower version rom.
Can anybody help me? this is my daily driver phone. currently using my nokia feature phone for calls and texts......
what I have:
Stock recovery
nandroid backup that i cannot use because i don't have twrp,
usb debugging turned off,
and oem unlocking off.
can access fastboot, sideload.
no access to OS.
Hatred for Pokemon Go
yay it's alive!!
this worked for me! http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
moderator kindly delete my post. Thanks!
Don't know why people are still flashing community build with twrp. So much information on this. Yes we have a working twrp for 3.1.1 but that's for after its installed.
Exodusche said:
Don't know why people are still flashing community build with twrp. So much information on this. Yes we have a working twrp for 3.1.1 but that's for after its installed.
Click to expand...
Click to collapse
I guess some confusion might have been caused when it was posted on the OnePlus forums (and apparently a quote from a OnePlus rep) that the new build was "compatible" with TWRP. This was later clarified (by a poster, not OnePlus) to mean V41 of the blu-spark TWRP.
Chat with support confirms.
Kashaila said:
Sorry to keep you waiting. I apologize for the confusion. I have just confirmed from the specialist that TWRP is compatible with the new rollout.
Click to expand...
Click to collapse
https://forums.oneplus.net/threads/...nity-beta-for-oneplus-x.464812/#post-15231909
Perhaps the mistake arises because it is not clear was that whilst TWRP is compatible, you couldn't actually flash the new community build with it! TWRP is only compatible (like you say) AFTER the flash!!
https://tapatalk.com/shareLink?url=...share_tid=3464987&share_fid=3793&share_type=t
[guide] unbrick device
This should help...
The solution for OPX hardbrick is similar to OPO and OP2 - you just need a Qualcomm driver and a recover package.
So,here we go !!
Step 1 :- DOWNLOADS :-
1.) Drivers :- https://www.androidfilehost.com/?fid=24052804347799753 (Extract these files to a folder on desktop.)
2.) Recovery Tool :- https://drive.google.com/folderview?...XM&usp=sharing (Download all files inside this folder and put them in a folder on desktop.)
Step 2 :- If you are using Windows other than Windows XP,turn off Driver Signature Enforcement.To do so,follow this guide :- http://www.howtogeek.com/167723/how-...igned-drivers/
Step 3 :- Press the power button for 40 seconds to turn off the phone.
Step 4 :- Press only volume up button for 10 sec and then power button. While keeping them pressed,connect OPX to PC.Hold volume up until your PC finds a new hardware .
Step 5 :- Go to device manager in your PC, find the new "QUALCOMM-HS USB Diagnostics xxxx" device or something like this (It must be Unknown Devices as QHUSB_BULK or under COMs and Ports as Qualcomm xxxx). Update its driver in property page using the Qualcomm driver provided (for 32bit windows, select x86 folder; for 64bit windows, select x64 folder).
Step 6 :- After installing the drivers,"Run As Administrator" the MSMDownloadToolV2.0 in the recovery tools folder.
Step 7 :- Click start at top left corner and wait for it to finish (Download Complete will come)
Step 8 :- Disconnect phone from PC and boot into system.
Now you can again do anything you wish to (unlock bootloader,etc).To unlock bootloader,go to developer options and tick "Enable OEM Unlock" first.
When you will need this guide ? :-
1.) If your phone is totally black (no racism)
2.) When you have locked the bootloader by mistake . (This happens when you flash a rom without having oem unlocking enabled.)
PS:- This method will wipe all data and restore your phone to OxygenOS and English Bootloader.
Thanks.
Hi, i can' get the qualcomm driver installed. It says like the hash isn't in the catalog and that it is damaged or messed with.
The Driver Signature is turned off in W10, so do you know something?
Also there is no communication with fastboot, i can boot to it, to the fb logo on the opx, but no way to get contact.
Thanks
tjeus said:
Hi, i can' get the qualcomm driver installed. It says like the hash isn't in the catalog and that it is damaged or messed with.
The Driver Signature is turned off in W10, so do you know something?
Also there is no communication with fastboot, i can boot to it, to the fb logo on the opx, but no way to get contact.
Thanks
Click to expand...
Click to collapse
Change computer.
Try with an old windows 7.
Or, try this: http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
Iirc, it's the same for Windows 10.
Sent from my ONE E1003 using Tapatalk
Himanshu Gusai said:
The solution for OPX hardbrick is similar to OPO and OP2 - you just need a Qualcomm driver and a recover package.
So,here we go !!
Step 1 :- DOWNLOADS :-
1.) Drivers :- https://www.androidfilehost.com/?fid=24052804347799753 (Extract these files to a folder on desktop.)
2.) Recovery Tool :- https://drive.google.com/folderview?...XM&usp=sharing (Download all files inside this folder and put them in a folder on desktop.)
Step 2 :- If you are using Windows other than Windows XP,turn off Driver Signature Enforcement.To do so,follow this guide :- http://www.howtogeek.com/167723/how-...igned-drivers/
Step 3 :- Press the power button for 40 seconds to turn off the phone.
Step 4 :- Press only volume up button for 10 sec and then power button. While keeping them pressed,connect OPX to PC.Hold volume up until your PC finds a new hardware .
Step 5 :- Go to device manager in your PC, find the new "QUALCOMM-HS USB Diagnostics xxxx" device or something like this (It must be Unknown Devices as QHUSB_BULK or under COMs and Ports as Qualcomm xxxx). Update its driver in property page using the Qualcomm driver provided (for 32bit windows, select x86 folder; for 64bit windows, select x64 folder).
Step 6 :- After installing the drivers,"Run As Administrator" the MSMDownloadToolV2.0 in the recovery tools folder.
Step 7 :- Click start at top left corner and wait for it to finish (Download Complete will come)
Step 8 :- Disconnect phone from PC and boot into system.
Now you can again do anything you wish to (unlock bootloader,etc).To unlock bootloader,go to developer options and tick "Enable OEM Unlock" first.
When you will need this guide ? :-
1.) If your phone is totally black (no racism)
2.) When you have locked the bootloader by mistake . (This happens when you flash a rom without having oem unlocking enabled.)
PS:- This method will wipe all data and restore your phone to OxygenOS and English Bootloader.
Thanks.
Click to expand...
Click to collapse
Hello, i have similar problem.
I tried to flash sultan rom on top of cm13 nightly, but before flashing i wiped everything, system,data, cache etc.
Then i went to flash sultan(with twrp, can't remember the version but i think it was new one), i had to change update script in .zip file to ONE before i could flash it.
Then when it flashed i tried to restart but it said no system.
I decided not to restart and flash OOS 3.1.3, it flashed and restarted...but it was constantly restarting, logo would show and 1 sec after it would restart, and it stuck in a loop. No recovery, no fastboot...
With a guide above i managed to get it to install recovery and rom, but when booting, after loading android apps, it would just say finishing boot and restart again...
So i had recovery and tried to flash a new recovery but bootloader is locked, and cannot be unlocked because, oem unlock is disabled....
I tried to flash OOS 3.1.3 with stock recovery but after clicking YES for flashing phone turned off. When i tried to turn it on it only shows logo, nothing booting....
And now when i try to use MSM Download tool everything is done but phone still doesn't boot anything at all......now it won't even get to the part with loading android apps.....
Can anyone help?? Could someone please upload recovery.img and system.img that i could put in MSM folder, maybe if it would flash that files it would work?
Is there any other way to set oem unlock to enabled without developer options???
help help help
Ovakisan said:
Hello, i have similar problem.
I tried to flash sultan rom on top of cm13 nightly, but before flashing i wiped everything, system,data, cache work?
Is there any other way to set oem unlock to enabled without developer options???
help help help
Click to expand...
Click to collapse
The part when it said no system you would of been fine if you just let it boot. Did you wipe before flashing 3.1.3 after Sultan? You need to get old stock recovery to flash 3.1.3. Whether that be thru fastboot or using the unbrick guide.
Once you have booted 3.1.3 you can continue with fastboor flashing one of the updated twrp's (Sultans,blu sparksv41,Nachets.)
Exodusche said:
The part when it said no system you would of been fine if you just let it boot. Did you wipe before flashing 3.1.3 after Sultan? You need to get old stock recovery to flash 3.1.3. Whether that be thru fastboot or using the unbrick guide.
Once you have booted 3.1.3 you can continue with fastboor flashing one of the updated twrp's (Sultans,blu sparksv41,Nachets.)
Click to expand...
Click to collapse
I did wipe yes, but within twrp not stock recovery, so that is what f**ed it up :/
Thru fastboot i can't do anything because bootloader is locked and cannot be unlocked. unbrick guide just boots, updates and starts android applications and then restarts.
A few minutes ago it managed to get into setup wizard, and i went skip skip skip just to get into settings and before i got in freaking thing restarted and now is again starting aplications in a loop......
Could i use different img files with MSM downloader? Where can i read more about msm downloader app and what it does?
Ovakisan said:
I did wipe yes, but within twrp not stock recovery, so that is what f**ed it up :/
Thru fastboot i can't do anything because bootloader is locked and cannot be unlocked. unbrick guide just boots, updates and starts android applications and then restarts.
A few minutes ago it managed to get into setup wizard, and i went skip skip skip just to get into settings and before i got in freaking thing restarted and now is again starting aplications in a loop......
Could i use different img files with MSM downloader? Where can i read more about msm downloader app and what it does?
Click to expand...
Click to collapse
Can't you go through the steps to unlock bootloader now that you've done the hard brick guide? I'm not sure bro someone will help you.
Exodusche said:
Can't you go through the steps to unlock bootloader now that you've done the hard brick guide? I'm not sure bro someone will help you.
Click to expand...
Click to collapse
The problem is that after going through guide, MSM downloader would say that its done, and it wouldn't boot in android, sou you can't get into developers options to enable OEM unlocking. And throught fastboot you can't do anything because its not enabled...
anyway if anyone is reading this that has same issue, just don't stop restarting, this little fu**** just managed to boot into android and i managed to get into dev options(after 3-4 restart, and 1 wipe cache data in stock recovery). after setting OEM unlock to enabled i tried to shut down phone through normal shutdown procedure but it got stuck, but force shut down with button worked and it saved OEM unlocking option on enabled. so i managed to unlock bootloader with fastboot.
So im with stock recovery now, lollipop ROM, should i try to flash OOS 3.1.3 now, or do i have to do something else prior to flashing????
I'm kind of scared now to do anything :'D
EDIT: ok, i ran into problem again -.-
twrp is flashed, latest. now when i try to flash cm13 or sultans cm13 i get this error.
http://imgur.com/a/BSpK1
Hello all ! Sry for my english but i think you can understand me
The problem is with my phone. :crying:!
I wanted to get the MIUI rom but when i install in twrp and reebot phone they stands in the place . I can only see logo all the time, nothings happen ;/
. I cant enter the recovery, only i cna see flashing logo and phone switches off. What can I do ?
All I know is I can enable fastboot mode :c
Help me please :C
you have to boot in to EDL through fastboot using edl.bat, then flash with MiFlash your fastboot rom
redminote3 said:
you have to boot in to EDL through fastboot using edl.bat, then flash with MiFlash your fastboot rom
Click to expand...
Click to collapse
But my pc dont see phone (mi pc suite , and mi flash ) .
Try installing universal ADB drivers...or try different PC...this must be a drivers problem.
still problem
redminote3 said:
Try installing universal ADB drivers...or try different PC...this must be a drivers problem.
Click to expand...
Click to collapse
when i use fastboot mode on phone and connect to pc its ok ( Android device connect). But when i want to connect to mi pc suite i have error : device isnt supported . Pls help me im really green about this problems ..
innynizty said:
when i use fastboot mode on phone and connect to pc its ok ( Android device connect). But when i want to connect to mi pc suite i have error : device isnt supported . Pls help me im really green about this problems ..
Click to expand...
Click to collapse
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
abihary said:
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
Click to expand...
Click to collapse
Write me pls step by step what i should to do bcs im really green with this phone and dont want to kill my xi :crying:
innynizty said:
Write me pls step by step what i should to do bcs im really green with this phone and dont want to kill my xi :crying:
Click to expand...
Click to collapse
which miflash version used for now? pls ensure you use 201604xx (64 bit only) or 20160830 (32/64 bit)
to flash device, already bunch of guide on guide section. pls do some research there.
to unlock your phone, you can follow below unofficial ways or official ways which require to apply to mi server
en.miui.com/thread-253680-1-1.html
abihary said:
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
Click to expand...
Click to collapse
Wait don't worry I will be uploading the correct files and procedure for doing that.
The thing is your phone is bricked and nothing to do now right.?
Theres a solution wait... Uploading that
---------- Post added at 10:54 AM ---------- Previous post was at 10:40 AM ----------
innynizty said:
Hello all ! Sry for my english but i think you can understand me
The problem is with my phone. :crying:!
I wanted to get the MIUI rom but when i install in twrp and reebot phone they stands in the place . I can only see logo all the time, nothings happen ;/
. I cant enter the recovery, only i cna see flashing logo and phone switches off. What can I do ?
All I know is I can enable fastboot mode :c
Help me please :C
Click to expand...
Click to collapse
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
[email protected] said:
Wait don't worry I will be uploading the correct files and procedure for doing that.
The thing is your phone is bricked and nothing to do now right.?
Theres a solution wait... Uploading that
---------- Post added at 10:54 AM ---------- Previous post was at 10:40 AM ----------
The solution is here:
download the required files from the given link: [50mb]
https://drive.google.com/file/d/0B8198j2pU-9ZcjVFZjFkLVAtT1E/view?usp=drivesdk
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
See the following overview video after installing the CM13 ROM:
https://www.youtube.com/watch?v=T--f7ClmQVM
Click to expand...
Click to collapse
When i click on edl they only shows me " waiting for device" ?
innynizty said:
When i click on edl they only shows me " waiting for device" ?
Click to expand...
Click to collapse
Did you enabled OEM unlocking and android debugging in developer option.
And did you connect your phone to PC while in fast boot mode.?
This may be the problem otherwise it does well
[email protected] said:
Did you enabled OEM unlocking and android debugging in developer option.
And did you connect your phone to PC while in fast boot mode.?
This may be the problem otherwise it does well
Click to expand...
Click to collapse
tell me how i can do this if i can only enable fastboot mode , when i want turn on my phone they stuck in mi logo ?
innynizty said:
tell me how i can do this if i can only enable fastboot mode , when i want turn on my phone they stuck in mi logo ?
Click to expand...
Click to collapse
Oh you are in a different problem...
This has happened to me...
Wait I m sending the video link how to fix this...
It will fix everything... If anywhere it causes problem tell me immediately.
Link to solution. [Follow each and every step]
Get 2 GB data ready.
You have to start from beginning
Now if you want to install cm13 ROM then follow my above instructions...
Hope it can help
If not I will find you other way out
[email protected] said:
Oh you are in a different problem...
This has happened to me...
Wait I m sending the video link how to fix this...
It will fix everything... If anywhere it causes problem tell me immediately.
Link to solution. [Follow each and every step]
Get 2 GB data ready.
You have to start from beginning
Now if you want to install cm13 ROM then follow my above instructions...
Hope it can help
If not I will find you other way out
Click to expand...
Click to collapse
I cant turn on my phone and enable nothink , i know how to root phone and other .
Then try this....
I don't know how you bricked your phone without turning OEM unlock and debug....!!?
[email protected] said:
Then try this....
I don't know how you bricked your phone without turning OEM unlock and debug....!!?
Click to expand...
Click to collapse
I try to install miui and then my phone stuck in xiaomi logo ;/
innynizty said:
I try to install miui and then my phone stuck in xiaomi logo ;/
Click to expand...
Click to collapse
It means it has no ROM installed now....
Even without that turning on you could boot into edl and unlock and flash twrp..
Don't know... Try again and search on net.. Now
Im also facing same issue???
Sent from my ASUS_T00J using Tapatalk
Do like people write before and Its easy to repair, Thanks boys
Guide to root Mi5
First of all you should unlock the bootloader first then only we can root our MI5
If You want to Unlock the bootloader MI5 follow this link :
http://en.miui.com/thread-267361-1-1.html
You can request the unlock code with any rom - Example global or Stable rom it doesnt matter (U should enable the developer options and enable the OEM unlocking and Usb debugging on
You have to create MIUI account and request the code - You have to wait for 3 days for receive the unlock code
after received the code. u can try with MI unlock code with this app . it will say binding time is too less u have to wait some time. It will say like that . (U dont want to wait try older version of Unlocking app ) it may allow u to unlock instantly ..
Follow this guide for unlocking app : http://en.miui.com/thread-536201-1-1.html
After unlocking the bootloader u have to flash twrp recovery
check this link for recovery : https://dl.twrp.me/gemini/ ( always use latest one)
download it and flash through fastboot mode.
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type:
adb reboot bootloader
You should now be in fastboot mode.
Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
fastboot flash recovery twrp.img
fastboot reboot
(Simple - You have TWRP recovery now)
ROOT GUIDE :
After installing TWRP recovery download super su zip file from chainfire
Download it from here : https://download.chainfire.eu/696/supersu/
flash it through TWRP ( Entering procedure for twrp by pressing power button + Volume up button)
Flashing through fastboot :
Step 1 : Connect ur phone to fastboot mode
Step 2 : Download it from this thread MI Flash tool http://xiaomiadvices.com/download-xiaomi-mi-flash-tool/
Step 3 : Download the fastboot rom this thread : http://xiaomiadvices.com/download-miui-8-global-stable-rom-fastboot-recovery-rom/
Step 4 : Flash it through fastboot mode - ( Note fastboot firmware is not in flashable extension - u have to change it the correct extension and it will work only place in C drive only (I mean which drive the os is installed ) - I attach the screenshot guide to change the extension later on - or else Google it
Step 5 : Flash it through the MI FLASH app and select flash all -
thats it
UNBRICK GUIDE: (also Relocking bootloader)
unfortunately ur device is bricked means u cant turn on ur device . any button will not work in ur phone so.. first u connect ur phone in data cable .. u might be see the QC bootloader driver will install in ur computer . After that u cant flash anything in MI flash tool . coz MI flashtool will not recognize ur device .
So .
Step 1 : Download MI5 CHINA PC suite to ur computer and install it ( English version will not work ) china version only updated
Step 2 : http://zhushou.xiaomi.com/ this link china pc suite is available
step 3 : Download firmware for our device http://en.miui.com/download-299.html download it from here (Global or Developer version thats not an issue)
Step 4 : Connect ur phone and open the pc suite . it has the option to select the update file in first menu ( I too dont know wat is written in that pc suite ) coz all is in chinese version ) check all the options u will find the option like select the update file that time u should press shift then only u can able to access the select option after that select the downloaded firmware ) simple u can see green option after selecting firmware. ( If u have doubt u can ask me in pm any time)
Step 5 : Flashing time it will take upto 30 minutes .
step 6 : After flashing it will automatically relock the bootloader .
Thats it . u have successfully unbricked the phone
(In some cases PC also not recognize the QC bootloader also .. that case is needed some hardware knowledge to open it the phone see this video to unbrick the hard stages : https://www.youtube.com/watch?v=ED96PJ-qYMM - See this video
IMPORTANT STEP :
After flashing ur mobile may not be turn on . that time put ur charger and PRESS HOME BUTTON + VOLUME UP AND DOWN+ POWER BUTTON together for 5 minutes it will on .
Sorry for my bad English
This all stuff i experienced much . So i shared with u all .
Thanks. More guide is coming soon :good:
This subforum is only for development threads..
hi i have a problem i installed custom kernel and after that my phone cannot see a sim card and saying invalid phone id etc.
what can i do now?
i tried to flash official firmware and nothing
After installing twrp is necessary to do any kind of wipes? does this method have any issues with encryption? Thanks
kurpiq said:
hi i have a problem i installed custom kernel and after that my phone cannot see a sim card and saying invalid phone id etc.
what can i do now?
i tried to flash official firmware and nothing
Click to expand...
Click to collapse
Which rom you are using??? flash the correct firmware.. if it is 7.1.2 nougat rom . flash 7.7.6 dev firmware
TheIceDragon said:
After installing twrp is necessary to do any kind of wipes? does this method have any issues with encryption? Thanks
Click to expand...
Click to collapse
No issues with your encryption
i have successfully flashed it, but the phone still cannot turn on, tried to put on charger and PRESS HOME BUTTON + VOLUME UP AND DOWN+ POWER BUTTON together for 5 minutes still cannot.... how? please help...
mi5
tyikki said:
i have successfully flashed it, but the phone still cannot turn on, tried to put on charger and PRESS HOME BUTTON + VOLUME UP AND DOWN+ POWER BUTTON together for 5 minutes still cannot.... how? please help...
Click to expand...
Click to collapse
i have this problem too for about too week, the only way you can turn on phone by flashing android 6 roms, such as ""gemini_global_images_V8.1.4.0.MAAMIDI_20161201.0000.00_6.0_global_e30a02e467.tgz"" the phone has problem with nougat.
my bootloader is unlocked but i cant change or update recovery
before two weeks ago i had miui 8.2.2 (nougat) on my phone with twrp but after restart take too long too turn on i flash it again and it is never run again on nougat ((((
---------- Post added at 10:42 AM ---------- Previous post was at 10:40 AM ----------
arunon2013 said:
Guide to root Mi5
First of all you should unlock the bootloader first then only we can root our MI5
If You want to Unlock the bootloader MI5 follow this link :
http://en.miui.com/thread-267361-1-1.html
You can request the unlock code with any rom - Example global or Stable rom it doesnt matter (U should enable the developer options and enable the OEM unlocking and Usb debugging on
You have to create MIUI account and request the code - You have to wait for 3 days for receive the unlock code
after received the code. u can try with MI unlock code with this app . it will say binding time is too less u have to wait some time. It will say like that . (U dont want to wait try older version of Unlocking app ) it may allow u to unlock instantly ..
Follow this guide for unlocking app : http://en.miui.com/thread-536201-1-1.html
After unlocking the bootloader u have to flash twrp recovery
check this link for recovery : https://dl.twrp.me/gemini/ ( always use latest one)
download it and flash through fastboot mode.
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type:
adb reboot bootloader
You should now be in fastboot mode.
Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
fastboot flash recovery twrp.img
fastboot reboot
(Simple - You have TWRP recovery now)
ROOT GUIDE :
After installing TWRP recovery download super su zip file from chainfire
Download it from here : https://download.chainfire.eu/696/supersu/
flash it through TWRP ( Entering procedure for twrp by pressing power button + Volume up button)
Flashing through fastboot :
Step 1 : Connect ur phone to fastboot mode
Step 2 : Download it from this thread MI Flash tool http://xiaomiadvices.com/download-xiaomi-mi-flash-tool/
Step 3 : Download the fastboot rom this thread : http://xiaomiadvices.com/download-miui-8-global-stable-rom-fastboot-recovery-rom/
Step 4 : Flash it through fastboot mode - ( Note fastboot firmware is not in flashable extension - u have to change it the correct extension and it will work only place in C drive only (I mean which drive the os is installed ) - I attach the screenshot guide to change the extension later on - or else Google it
Step 5 : Flash it through the MI FLASH app and select flash all -
thats it
UNBRICK GUIDE: (also Relocking bootloader)
unfortunately ur device is bricked means u cant turn on ur device . any button will not work in ur phone so.. first u connect ur phone in data cable .. u might be see the QC bootloader driver will install in ur computer . After that u cant flash anything in MI flash tool . coz MI flashtool will not recognize ur device .
So .
Step 1 : Download MI5 CHINA PC suite to ur computer and install it ( English version will not work ) china version only updated
Step 2 : http://zhushou.xiaomi.com/ this link china pc suite is available
step 3 : Download firmware for our device http://en.miui.com/download-299.html download it from here (Global or Developer version thats not an issue)
Step 4 : Connect ur phone and open the pc suite . it has the option to select the update file in first menu ( I too dont know wat is written in that pc suite ) coz all is in chinese version ) check all the options u will find the option like select the update file that time u should press shift then only u can able to access the select option after that select the downloaded firmware ) simple u can see green option after selecting firmware. ( If u have doubt u can ask me in pm any time)
Step 5 : Flashing time it will take upto 30 minutes .
step 6 : After flashing it will automatically relock the bootloader .
Thats it . u have successfully unbricked the phone
(In some cases PC also not recognize the QC bootloader also .. that case is needed some hardware knowledge to open it the phone see this video to unbrick the hard stages : https://www.youtube.com/watch?v=ED96PJ-qYMM - See this video
IMPORTANT STEP :
After flashing ur mobile may not be turn on . that time put ur charger and PRESS HOME BUTTON + VOLUME UP AND DOWN+ POWER BUTTON together for 5 minutes it will on .
Sorry for my bad English
This all stuff i experienced much . So i shared with u all .
Thanks. More guide is coming soon :good:
Click to expand...
Click to collapse
i have problem too for about too week, the only way you can turn on phone by flashing android 6 roms, such as ""gemini_global_images_V8.1.4.0.MAAMIDI_20161201.0000.00_6.0_global_e30a02e467.tgz"", the phone has problem with nougat.
my bootloader is unlocked but i cant change or update recovery
before two weeks ago i had miui 8.2.2 (nougat) on my phone with twrp but after restart take too long (about 2hoursto turn on i flash it again and it is never run again on nougat ((((
tried to flash it with the newest MiFlash201612220 and V8.5.2.0, all successful, but it still cannot turn on.... anyone can help???
Hi after installing twrp via fastboot I am not able to enter twrp in any way, help?
hard brick Mi5
Hi! My phone brick during charge when i was asleep... he gets stuck in Mi logo and I 've tryed everything... no luck
After several types of attempts ...
in ADB window I was looking for the device with the wrong command -> is fastboot device and not adb device ... my device apears on hexadecimal
in mi flash comes the same id of the fastboot ADB (hexadecimal) and not the expectable COM "1"
I tried to flash fastboot rom without success, it says that I have the device locked ...
I have already filled in the form to unlock the bootloader already five months ago and I never received the code
- via fastboot ADB (recognizes the terminal but its designation is hexadecimal and not COM as intended) i already install all drivers , include qualcomm, but it never apears no manager device...
- via EDL (popup mode) is not possible because it is locked
- Mi unluck - blocks us 99% and says that "corrent acount is not bound to this device"
- Mi flash - recognize the device (hexadecimal), try to flash the rom via fastboot and says that the device is locked
I am desperate and without options ...
i think some hardware may be burn...
Hello there
I think I have bricked my phone quite bad. I tried the things you said but still the phone does not switch on. The interesting thing is that the green indicating light switches on and also when I press the power button the phone vibrates. I dont know what else should I do. Can you also tell me if I really have to press power + volume up and down + home button for 5 mins?
Thanks for the reply in advance.
hello i bricked my poco an no one in my country (iran) can help me . and there is no xiaomi center here. i can not go to fastboot or recovery after update . i can not flash rom by anythings (mi flash tools .box and ............................) itis on edl mode all time . its bootloader unlocked . and when i want to flash rom some errors like port is busy . cannot reccive hello pocket and ...................... please someone help me i am not a person who can buy another one .even i looked for nand flash memory to buy but i couldnt found
please someone help me i will appreciate you all of my life
Zanaxx said:
hello i bricked my poco an no one in my country (iran) can help me . and there is no xiaomi center here. i can not go to fastboot or recovery after update . i can not flash rom by anythings (mi flash tools .box and ............................) itis on edl mode all time . its bootloader unlocked . and when i want to flash rom some errors like port is busy . cannot reccive hello pocket and ...................... please someone help me i am not a person who can buy another one .even i looked for nand flash memory to buy but i couldnt found
please someone help me i will appreciate you all of my life
Click to expand...
Click to collapse
If its on edl mode then its hard bricked. Unfortunately only Xiaomi service center can help you
there is no xiaomi center in iran
Zanaxx said:
there is no xiaomi center in iran
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=g9FvBILowvA
kuto232 said:
https://www.youtube.com/watch?v=g9FvBILowvA
Click to expand...
Click to collapse
i will try it i wish it could help
Zanaxx said:
hello i bricked my poco an no one in my country (iran) can help me . and there is no xiaomi center here. i can not go to fastboot or recovery after update . i can not flash rom by anythings (mi flash tools .box and ............................) itis on edl mode all time . its bootloader unlocked . and when i want to flash rom some errors like port is busy . cannot reccive hello pocket and ...................... please someone help me i am not a person who can buy another one .even i looked for nand flash memory to buy but i couldnt found
please someone help me i will appreciate you all of my life
Click to expand...
Click to collapse
slm dada.xobi?chikar krdi k brick shod??rom eshtebah zadi o bootloader ro basti k injoori shod?
master76rz said:
slm dada.xobi?chikar krdi k brick shod??rom eshtebah zadi o bootloader ro basti k injoori shod?
Click to expand...
Click to collapse
سلام نه رام اشتباه نبودش همین اخرین ورژن بودش که زدم کامل هم فلاش شد و زد موفق نمیدونم چرا بالا نیومد دیگه هیچ واکنشی نداره گوشی فقط رو edl مونده همینجوری
Zanaxx said:
سلام نه رام اشتباه نبودش همین اخرین ورژن بودش که زدم کامل هم فلاش شد و زد موفق نمیدونم چرا بالا نیومد دیگه هیچ واکنشی نداره گوشی فقط رو edl مونده همینجوری
Click to expand...
Click to collapse
az twrp nasb krdi?qaedatan nbyd injoori mishod.mn hftei 2 ta rom miznm
raveshi k balatr yki gft(utube) ro emthan krdi?
@Zanaxx and @master76rz
Please post in English. That is one of the rules of XDA. I know that it is not your mother tongue. Still you have to use English. Please co-operate.
master76rz said:
az twrp nasb krdi?qaedatan nbyd injoori mishod.mn hftei 2 ta rom miznm
raveshi k balatr yki gft(utube) ro emthan krdi?
Click to expand...
Click to collapse
on ravesh baraye zamani hastesh ke beshe raft to fastboot man kollan to edl mod hastam , har bar ke mizanam khata miare
tnsmani said:
@Zanaxx and @master76rz
Please post in English. That is one of the rules of XDA. I know that it is not your mother tongue. Still you have to use English. Please co-operate.
Click to expand...
Click to collapse
ok sorry
kuto232 said:
https://www.youtube.com/watch?v=g9FvBILowvA
Click to expand...
Click to collapse
it does not work this way becuse i can not go to fastboot or recovery and unbricking feature it doesnt available yet in this program
Zanaxx said:
it does not work this way becuse i can not go to fastboot or recovery and unbricking feature it doesnt available yet in this program
Click to expand...
Click to collapse
you can boot into recovery?
Zanaxx said:
it does not work this way becuse i can not go to fastboot or recovery and unbricking feature it doesnt available yet in this program
Click to expand...
Click to collapse
SEND ME PM IN TELEGRAM BRO...I WILL JOIN U SOME GP MAYBE THEY CAN HELP U.ALSO .USE THIS METHOD THAT I RESEARCH FOR U
Probably you have the Anti-Rollback activated and tried to flash another ROM. After a successful installation your phone just went dead.
Here's how you could fix it (or how I fixed it):
1. Windows PC with MiFlash Beta (!) tool
2. Download a Xiaomi Fastboot Rom (ends with *.tgz)
http://bigota.d.miui.com/8.8.30/nitr...66dfc4bb58.tgz
--> Beta (MIUI 10 8.8.30) (ANTI ROLL-BACK ACTIVATED!!!)
3. extract Rom to your PC
4. start MiFlash Beta tool and point to the extracted folder
5. press Vol+ & Vol- & Power on your MiMax3 for 10 seconds and connect it to your PC while holding the buttons another second after plugging it in
6. press refresh button on MiFlash tool
7. if your drivers are installed correct, your phone should be visible on COM-Port XXX
8. press flash and hopefully it will be flashed
9. if not: try several times
10. wait until it boots to the welcome screen (around 5 mins)
now your phone should be useable again.
If you want Treble-Rom to be installed, then go on:
11. turn phone off --> go into fastboot mode (Vol- & Power) --> install TWRP --> boot into TWRP
12. wipe date = yes --> reboot TWRP
13. make yourself a MiRom at https://mi-globe.com/rom-builder-fea...lname=Mi+Max+3
--> I used 8.8.30 version, and choose "advanced settings"--> set Magisk for root and build your zip
14. flash it through TWRP
15. reboot --> you will end up in a bootloop, but thats okay
16. go back to TWRP: swipe factory reset
17. install treble.img + gapps + Magisk and reboot and you're all good
ISHALA K NATIJE BGIRI DADASH TO IN VAZE GROONI
---------- Post added at 02:14 PM ---------- Previous post was at 02:12 PM ----------
Zanaxx said:
it does not work this way becuse i can not go to fastboot or recovery and unbricking feature it doesnt available yet in this program
Click to expand...
Click to collapse
SEE HERE
https://forum.xda-developers.com/mi-max-3/how-to/to-youre-stuck-edl-mode-black-screen-t3837846
IF IT WORKS COME AND SAY IT BRO...ITS VERY IMPORTNAT TO SHARE UR INFO:fingers-crossed:
And just remember that some people observe problems flashing on a system with Ryzen CPU. So if this is your case also, try doing all this stuff on computer with Intel CPU
master76rz said:
SEND ME PM IN TELEGRAM BRO...I WILL JOIN U SOME GP MAYBE THEY CAN HELP U.ALSO .USE THIS METHOD THAT I RESEARCH FOR U
Probably you have the Anti-Rollback activated and tried to flash another ROM. After a successful installation your phone just went dead.
Here's how you could fix it (or how I fixed it):
1. Windows PC with MiFlash Beta (!) tool
2. Download a Xiaomi Fastboot Rom (ends with *.tgz)
http://bigota.d.miui.com/8.8.30/nitr...66dfc4bb58.tgz
--> Beta (MIUI 10 8.8.30) (ANTI ROLL-BACK ACTIVATED!!!)
3. extract Rom to your PC
4. start MiFlash Beta tool and point to the extracted folder
5. press Vol+ & Vol- & Power on your MiMax3 for 10 seconds and connect it to your PC while holding the buttons another second after plugging it in
6. press refresh button on MiFlash tool
7. if your drivers are installed correct, your phone should be visible on COM-Port XXX
8. press flash and hopefully it will be flashed
9. if not: try several times
10. wait until it boots to the welcome screen (around 5 mins)
now your phone should be useable again.
If you want Treble-Rom to be installed, then go on:
11. turn phone off --> go into fastboot mode (Vol- & Power) --> install TWRP --> boot into TWRP
12. wipe date = yes --> reboot TWRP
13. make yourself a MiRom at https://mi-globe.com/rom-builder-fea...lname=Mi+Max+3
--> I used 8.8.30 version, and choose "advanced settings"--> set Magisk for root and build your zip
14. flash it through TWRP
15. reboot --> you will end up in a bootloop, but thats okay
16. go back to TWRP: swipe factory reset
17. install treble.img + gapps + Magisk and reboot and you're all good
ISHALA K NATIJE BGIRI DADASH TO IN VAZE GROONI
---------- Post added at 02:14 PM ---------- Previous post was at 02:12 PM ----------
SEE HERE
https://forum.xda-developers.com/mi-max-3/how-to/to-youre-stuck-edl-mode-black-screen-t3837846
IF IT WORKS COME AND SAY IT BRO...ITS VERY IMPORTNAT TO SHARE UR INFO:fingers-crossed:
Click to expand...
Click to collapse
thanks i will try it i hope it sucsess
master76rz said:
SEND ME PM IN TELEGRAM BRO...I WILL JOIN U SOME GP MAYBE THEY CAN HELP U.ALSO .USE THIS METHOD THAT I RESEARCH FOR U
Probably you have the Anti-Rollback activated and tried to flash another ROM. After a successful installation your phone just went dead.
Here's how you could fix it (or how I fixed it):
1. Windows PC with MiFlash Beta (!) tool
2. Download a Xiaomi Fastboot Rom (ends with *.tgz)
http://bigota.d.miui.com/8.8.30/nitr...66dfc4bb58.tgz
--> Beta (MIUI 10 8.8.30) (ANTI ROLL-BACK ACTIVATED!!!)
3. extract Rom to your PC
4. start MiFlash Beta tool and point to the extracted folder
5. press Vol+ & Vol- & Power on your MiMax3 for 10 seconds and connect it to your PC while holding the buttons another second after plugging it in
6. press refresh button on MiFlash tool
7. if your drivers are installed correct, your phone should be visible on COM-Port XXX
8. press flash and hopefully it will be flashed
9. if not: try several times
10. wait until it boots to the welcome screen (around 5 mins)
now your phone should be useable again.
If you want Treble-Rom to be installed, then go on:
11. turn phone off --> go into fastboot mode (Vol- & Power) --> install TWRP --> boot into TWRP
12. wipe date = yes --> reboot TWRP
13. make yourself a MiRom at https://mi-globe.com/rom-builder-fea...lname=Mi+Max+3
--> I used 8.8.30 version, and choose "advanced settings"--> set Magisk for root and build your zip
14. flash it through TWRP
15. reboot --> you will end up in a bootloop, but thats okay
16. go back to TWRP: swipe factory reset
17. install treble.img + gapps + Magisk and reboot and you're all good
ISHALA K NATIJE BGIRI DADASH TO IN VAZE GROONI
---------- Post added at 02:14 PM ---------- Previous post was at 02:12 PM ----------
SEE HERE
https://forum.xda-developers.com/mi-max-3/how-to/to-youre-stuck-edl-mode-black-screen-t3837846
IF IT WORKS COME AND SAY IT BRO...ITS VERY IMPORTNAT TO SHARE UR INFO:fingers-crossed:
Click to expand...
Click to collapse
it doesnt work this way error the phone can not read com port happened
Zanaxx said:
it doesnt work this way error the phone can not read com port happened
Click to expand...
Click to collapse
read whole page that i gave to u...hope it work man..but if u find soloution send us man
it will be great if i could someone that i can trust him in india or any country that they have xiaomi centers to send him the phoneand that person take it to xiaomi centers and ofcourse i will pay all off is payment
but really is there any one in this bad world that i can trust him?
it seems some people have this problem with last update too
and noone in xiaomi center answer us
and no fukhing one can fix it