Does anyone know where I can download the stock firmware for the verizon model? Also, can I Odin this firmware without USB debugging enabled? Thanks in advance.
nghiaxp said:
Does anyone know where I can download the stock firmware for the verizon model? Also, can I Odin this firmware without USB debugging enabled? Thanks in advance.
Click to expand...
Click to collapse
Have you tried sammobile?
http://www.sammobile.com/devices/specs/SM-T677/
I don't see one specific to the Verizon View though....
nghiaxp said:
Does anyone know where I can download the stock firmware for the verizon model? Also, can I Odin this firmware without USB debugging enabled? Thanks in advance.
Click to expand...
Click to collapse
You probably have already gotten an answer for this at some point in the last year but just in case, the way to enable USB Debugging is to just go into settings, and scroll down to About Device, find Build Number and tap it 10 times. That Enables USB Debugging in just about all Samsung devices. I'm sure you found listen to over the last few months but I figured I'd would added here since there's not a lot of posts on the Galaxy View.
nghiaxp said:
Does anyone know where I can download the stock firmware for the verizon model? Also, can I Odin this firmware without USB debugging enabled? Thanks in advance.
Click to expand...
Click to collapse
Yes you can flash Odin without ADB Debugging due to it being done from Recovery (power up the tablet using power and both volume buttons, then volume up (Away from power button) and boom, then you use Odin..
Do you still need the Stock Verizon Firmware?
IM0001 said:
Yes you can flash Odin without ADB Debugging due to it being done from Recovery (power up the tablet using power and both volume buttons, then volume up (Away from power button) and boom, then you use Odin..
Do you still need the Stock Verizon Firmware?
Click to expand...
Click to collapse
Do you happen to have the firmware for the Galaxy View? Sammobile is charging for the files now.
Related
When i first got my phone back from repair i wanted to use download mode to put the CWM in and flash it. But when i first did it it started a download process is it normal?
2.3.6
What download process exactly?
Sent from my GT-I9100 using xda premium
In the middle
" Downloading ....
Do not turn off target"
It has some writing on the top left too would you like to know what it says?
nothing is downlading...it by default shows like that...when you start download from ODIN you can see the WRITING PROCESS TIMELINE under that logo
Could you please elaborate how do you put the CWM in while on the Download mode
Yep, as above. That is download mode. Now your try to connect to Odin (kill lies first). Edit: kies not lies (stupid Swype)
Sent from my GT-I9100 using xda premium
Oh Im just following these instructions.
- Unzip the attached CF-Root-xxx-vX.X.zip
- (USB) Disconnect your phone from your computer
- Start ODIN
- Click the PDA button, and select CF-Root-xxx-vX.X.tar
- Put your phone in download mode
- (USB) Connect the phone to your computer
- Make sure repartition is NOT checked
- Click the START button
- Wait for the phone to reboot
Im sorry its just my first time doing anything like this xD
yes instruction is correct,
Make sure dirvers are installed, Kies to be killed,
once you connected the phone to PC (connect to mother board USB socket backside)
the ID:COM box will be highlighted in yellow, and in the message box you can see "added"
Good luck...
Do you kill kies first then go into download mode?
Renren1403 said:
Do you kill kies first then go into download mode?
Click to expand...
Click to collapse
doesnt matter
Thanks. So i made sure i had drivers for my phone. I go into download mode without phone in. I start ODIN on pc then plug it in (my phone that is) but the ID:COM doesnt change. Am i doing something wrong?
OVer: 1.85
Renren1403 said:
Thanks. So i made sure i had drivers for my phone. I go into download mode without phone in. I start ODIN on pc then plug it in (my phone that is) but the ID:COM doesnt change. Am i doing something wrong?
OVer: 1.85
Click to expand...
Click to collapse
Odin must identify your phone first like said above..
uninstall the Kies, download the latest version from Samsung install after a PC reboot, after install reboot PC, (kill means not unistall, close the applicaion, also check in your system tray)
Renren1403 said:
Thanks. So i made sure i had drivers for my phone. I go into download mode without phone in. I start ODIN on pc then plug it in (my phone that is) but the ID:COM doesnt change. Am i doing something wrong?
OVer: 1.85
Click to expand...
Click to collapse
Ensure USB debugging is on (checked) on settings first so Odin well recognise.
Sent from my GT-I9100 using xda premium
Thank you that was the missing piece! Kies for PC lol! So how do i know if my phone was successfully rooted?
UpInTheAir said:
Ensure USB debugging is on (checked) on settings first so Odin well recognise.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I dont think i had debugging on. How do i know if its on?
Renren1403 said:
Thank you that was the missing piece! Kies for PC lol! So how do i know if my phone was successfully rooted?
I dont think i had debugging on. How do i know if its on?
Click to expand...
Click to collapse
if you have successfully flashed correct CF-root from ODIN, thats it, next is your duty to google for rooted applications.....
@ UpInTheAir : for my knowledge if I am not correct,
Download mod itself is a debugging mode, not essenstial to do it from Menu...
the people who did not enable the debugging mod and bricked the phone or stuck on boot logo have been flashing ROMs by enterin into download mod without any treble...
@ZACQ8
Thanks i installed a custom rom now and its working fine and dandy.
One last question. Could you point me to where i can find how to check flash counter and reset it? and re flashing stock roms increase flash counter? or really how do i get everything ready so i can return my phone to repair if the time calls?
Renren1403 said:
@ZACQ8
Thanks i installed a custom rom now and its working fine and dandy.
One last question. Could you point me to where i can find how to check flash counter and reset it? and re flashing stock roms increase flash counter? or really how do i get everything ready so i can return my phone to repair if the time calls?
Click to expand...
Click to collapse
to reset counter you need a Jig and old bootloader to flash, if the current one is new...
I will just borrow Mistahbungle's posts here dont forget to thank him..
http://forum.xda-developers.com/showpost.php?p=25124275&postcount=16
http://forum.xda-developers.com/showpost.php?p=25123832&postcount=13
Thanks so much
ZACQ8 said:
if you have successfully flashed correct CF-root from ODIN, thats it, next is your duty to google for rooted applications.....
@ UpInTheAir : for my knowledge if I am not correct,
Download mod itself is a debugging mode, not essenstial to do it from Menu...
the people who did not enable the debugging mod and bricked the phone or stuck on boot logo have been flashing ROMs by enterin into download mod without any treble...
Click to expand...
Click to collapse
Yes, you are correct thanks. Not much sleep lately
You need USB debugging for ADB commands .... Except for ADB when in recovery mode
Sent from my GT-P6810 using xda premium
I was using odin to return my sgp 5.0 to the stock rom and it failed so i ripped out the cable and all my sgp 5.0 screen shows is a phone dot dot a caution sign dot dot a computer nothings working can somebody help me?
That's forced download mode. Just flash the stock ROM with Odin, but make sure you do it correctly
Sent from my Nexus 7 using XDA Premium HD app
how
can u tell me how to flash a rom with odin correctly?
Att2000 said:
can u tell me how to flash a rom with odin correctly?
Click to expand...
Click to collapse
Check this thread: http://forum.xda-developers.com/showthread.php?t=1922461
Sent from my Nexus 7 using XDA Premium HD app
no
no sorry odin couldnt find my device
Att2000 said:
no sorry odin couldnt find my device
Click to expand...
Click to collapse
Did you download install the Samsung USB Drivers from that how to flash thread? If not do so and try it and odin should find your device
Att2000 said:
I was using odin to return my sgp 5.0 to the stock rom and it failed so i ripped out the cable and all my sgp 5.0 screen shows is a phone dot dot a caution sign dot dot a computer nothings working can somebody help me?
Click to expand...
Click to collapse
So, you were flashing back to stock. Which means that you have flashed with ODIN before, I presume. Which means that you probably have the correct USB drivers installed on your computer.
Power up your device, or simply be sure that you are seeing the phone/computer sign. This is, as Supermaster34 said, forced download. You should be able to flash a ROM from this screen.
1. Run the ODIN software. Insert the USB cable into your device.
2. In the ODIN interface, click the PDA button.
3. Navigate to the directory where you have stored the stock ROM and double-click the ROM to open it.
4. Now, press the START button.
5. ODIN will flash the stock ROM and automatically reboot for you!
Good luck!:good:
Samsung Kies/Drivers
You need to install Samsung Kies to your computer first, which installs the drivers that ODIN needs to detect your device. Then just plug it in, put it in download mode, and flash with ODIN.
I recommend you make sure to use a STOCK Samsung cable. Your computer may not recognize your device without it!
I have experienced more than one problem with several of my previous soft bricked Moto phones and most recently with a player 5.0 that I purchased cheap because it was hard bricked that I was only able to fix using the stock device cable.
Hi,
I was trying to remove any trace that my Samsung i9300 phone had ever been rooted but in the process I forgot to re enable the USB Debugging mode so consequently now I am locked in the download mode & if I try to reboot, the phone states "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."! So as you can hopefully appreciate I am a little peed off with myself & for the life of me I cannot see away out of it so is there anyone out there please who can shine a bit of life on my troubled phone & please do not forget that the USB Debugging is NOT enabled.....
Kind regards with thanks
Phil
UPDATE
I have now tried flashing CF-Root-SGS3-v6.4 with Odin3 v1.85, but whilst the phone appears to be making a full recovery & Odin confirms a successful flashing it stops on the black Samsung welcome screen with an exclamation mark to the top left hand corner to the screen, so could anyone advise me what my next step should be please?
flash a stock rom through odin.
SRIRAM
Sent from GT-I9300 running SOTMAX ULTIMATE V22 (XXUFME7)
PHILnFINGERS said:
Hi,
I was trying to remove any trace that my Samsung i9300 phone had ever been rooted but in the process I forgot to re enable the USB Debugging mode so consequently now I am locked in the download mode & if I try to reboot, the phone states "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."! So as you can hopefully appreciate I am a little peed off with myself & for the life of me I cannot see away out of it so is there anyone out there please who can shine a bit of life on my troubled phone & please do not forget that the USB Debugging is NOT enabled please.....
Kind regards with thanks
Phil
Click to expand...
Click to collapse
You have to have
*Odin
*USB Cable
*PC/Laptop
1 Download a ROM in sammobile.com
2 unzip the file
3 you will find a .tar file, now put it on the PDA section in Odin
4 Put phone on Download Mode
5 connect phone to pc/laptop
6 Odin will recognize your phone
7 click start
8 phone will reboot by itself
Phone is still dead after flashing with CF-Root-SGS3-v6.4
I have tried flashing CF-Root-SGS3-v6.4 with Odin3 v1.85, but whilst the phone appears to be making a full recovery & Odin confirms a successful flashing it stops on the black Samsung welcome screen with an exclamation mark to the top left hand corner to the screen, so could anyone advise me what my next step should be please?
sriram231092 said:
flash a stock rom through odin.
SRIRAM
Sent from GT-I9300 running SOTMAX ULTIMATE V22 (XXUFME7)
Click to expand...
Click to collapse
Phone is still dead after flashing with CF-Root-SGS3-v6.4
I have tried flashing CF-Root-SGS3-v6.4 with Odin3 v1.85, but whilst the phone appears to be making a full recovery & Odin confirms a successful flashing it stops on the black Samsung welcome screen with an exclamation mark to the top left hand corner to the screen, so could anyone advise me what my next step should be please?
saywhatt said:
You have to have
*Odin
*USB Cable
*PC/Laptop
1 Download a ROM in sammobile.com
2 unzip the file
3 you will find a .tar file, now put it on the PDA section in Odin
4 Put phone on Download Mode
5 connect phone to pc/laptop
6 Odin will recognize your phone
7 click start
8 phone will reboot by itself
Click to expand...
Click to collapse
PHILnFINGERS said:
I have tried flashing CF-Root-SGS3-v6.4 with Odin3 v1.85, but whilst the phone appears to be making a full recovery & Odin confirms a successful flashing it stops on the black Samsung welcome screen with an exclamation mark to the top left hand corner to the screen, so could anyone advise me what my next step should be please?
Click to expand...
Click to collapse
when you flashed the ROM, did you unplug the USB connector?
sounds like you bricked your S3 mate
You said that you flashed CF-root?
CF-root flashes recovery and kernel for root access.
Download a full stock rom from sammobile and flash it :good:
USB Debugging has no affect on download mode... :facepalm:
Upon Odin confirming that it was successful it was then & only then did I unplug the USB cable
saywhatt said:
when you flashed the ROM, did you unplug the USB connector?
sounds like you bricked your S3 mate
Click to expand...
Click to collapse
Given that Odin confirmed that it was successful after the flashing the the latest UK firmware from Sammobile I then unplugged the USB cable, but I then found that the phone hadn't actually finished & instead it stopped on the black Samsung welcome screen & it won't budge from that. This may or may not be the reason for this, but I feel that I may have forgot to enable the USB DEBUGGING, so would this cause the phone not to boot correctly?
As I am unable to boot the phone, I am also unable to enable the USB DEBUGGING, so is there anything that I can do to resolve these issues please?
saywhatt said:
You have to have
*Odin
*USB Cable
*PC/Laptop
1 Download a ROM in sammobile.com
2 unzip the file
3 you will find a .tar file, now put it on the PDA section in Odin
4 Put phone on Download Mode
5 connect phone to pc/laptop
6 Odin will recognize your phone
7 click start
8 phone will reboot by itself
Click to expand...
Click to collapse
You say that the USB Debugging has not effect on download mode so why do other users/developers stress that it needs to be enabled?
b-eock said:
USB Debugging has no affect on download mode... :facepalm:
Click to expand...
Click to collapse
PHILnFINGERS said:
You say that the USB Debugging has not effect on download mode so why do other users/developers stress that it needs to be enabled?
Click to expand...
Click to collapse
It only matters when your actually booted into a Rom.. and your not even close to that part yet..
Sent from my HTC One XL using xda premium
USB Debugging has no affect on download mode - INVALID Statement
b-eock said:
USB Debugging has no affect on download mode... :facepalm:
Click to expand...
Click to collapse
I have a same problem with OP.
After entered to recovery mode and wiped/cleared cache, I didn't boot the phone, just continue to download mode.
It's mean USB Debugging is not enable after recovery. Now my phone can't boot also can't charge just appear msg:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Recovery via Kies can't be done because my phone have a problem IMEI=unknown and Baseband=unknown before this happen, so Kies can't recognise the phone. If IMEI is valid and Kies can connect the phone, the problem can be resolved by Kies.
I hope someone here have a good solution how to resolve the problem that ODIN can't reflash the phone because 'USB Debugging' is not enabled in the first place.
HP: Samsung Galaxy i9100 JB 4.1.2
Hi,
i have Lg G2 D802 European (UK purchase) model phone of which is password locked, it was used by one of my family member and they have forgotten the Password. its in stock firmware.
here are the bellow issue i am facing;
1. USB Debugging mode is not activated
2. phone doesn't boot up to Recovery (for some reason its not going to recovery- key combination doesn't work)
3. wifi and Data was not active before its getting locked.
all i have is download mode. which is not been quite help. i have also user's Google account details which is also not been a help as WIFI/DATA is not being connecting.
I tried with LG suite, phone is getting recognized
i tried ADB, but phone doest get recognized to execute the command .
i tried almost all method which was provided in the XDA and couldn't get to their.
Please advice.
in this case you have only one option left and that is make reflash stock rom using download mode.
as you described debugging is off, No Data Connection, Recovery isn't accessible. you are simply locked away from any way to unlock your device
Download the stock Rom and flash it using Odin.
And remember one thing, always make sure USB Debugging is enabled, it really helps in such cases.
all the best
Hit Thanks if helped.
abhinavp649 said:
in this case you have only one option left and that is make reflash stock rom using download mode.
as you described debugging is off, No Data Connection, Recovery isn't accessible. you are simply locked away from any way to unlock your device
Download the stock Rom and flash it using Odin.
And remember one thing, always make sure USB Debugging is enabled, it really helps in such cases.
all the best
Hit Thanks if helped.
Click to expand...
Click to collapse
Odin Dint detect my phone in download mode.
akshayhgd said:
Odin Dint detect my phone in download mode.
Click to expand...
Click to collapse
I'm so sorry that was so dumb of me, obviously it will not detect because you have a LG Device And ODIN is SAMSUNG handsets only.
you can factory reset your phone, just follow this tutorial:
https://www.youtube.com/watch?v=3ogBvzbPikc
abhinavp649 said:
I'm so sorry that was so dumb of me, obviously it will not detect because you have a LG Device And ODIN is SAMSUNG handsets only.
you can factory reset your phone, just follow this tutorial:
https://www.youtube.com/watch?v=3ogBvzbPikc
Click to expand...
Click to collapse
Tried - dint work, as i i mentioned earlier this key combination is not working though Volume down button works.
Guys, any suggestion? or any method to wipe or restore?
please advice.
akshayhgd said:
Guys, any suggestion? or any method to wipe or restore?
please advice.
Click to expand...
Click to collapse
I don't know why the Recovery Combination isn't working.
The last option is left to take your phone any service center and let them do the technical work. and also ask them a way to access recovery.
An error has occurred while updating the device software Use the Emergency recovery in the Smart Switch PC Software. An I cannot get it into d/l mode to odin the new firmware. Anyone know how to get it back into d/l mode? Tried pwr vol- bixby, I get to the menu to choose vol up or vol down and no matter the choice I go back to the light blue scrren with that same msg.
Please help!
Thanks
total7kaos said:
An error has occurred while updating the device software Use the Emergency recovery in the Smart Switch PC Software. An I cannot get it into d/l mode to odin the new firmware. Anyone know how to get it back into d/l mode? Tried pwr vol- bixby, I get to the menu to choose vol up or vol down and no matter the choice I go back to the light blue scrren with that same msg.
Please help!
Thanks
Click to expand...
Click to collapse
Try running odin from that screen
Sent from my God Mode 8
louforgiveno said:
Try running odin from that screen
Sent from my God Mode 8
Click to expand...
Click to collapse
I did and it forced it and now works great. Thanks!
What is a god mode 8??
total7kaos said:
I did and it forced it and now works great. Thanks!
What is a god mode 8??
Click to expand...
Click to collapse
Lol, its my Rooted Note 8 (galaxy note 8 - god mode 8) just a play on words.
Sent from my God Mode 8
total7kaos said:
I did and it forced it and now works great. Thanks!
What is a god mode 8??
Click to expand...
Click to collapse
I could not. I have the same problem and I hate odin in setuppconnection. how did you do it?
Thanks
louforgiveno said:
Try running odin from that screen
Sent from my God Mode 8
Click to expand...
Click to collapse
Did not realize this screen actually was download mode, just for Oreo. Thanks I got flashed in Odin!
AaronCompNetSys said:
Did not realize this screen actually was download mode, just for Oreo. Thanks I got flashed in Odin!
Click to expand...
Click to collapse
I tried to do this method and fail o odin when i tried to run odin and flash the sock firmware on that error screen just got fail
any help please
osk4rin said:
I tried to do this method and fail o odin when i tried to run odin and flash the sock firmware on that error screen just got fail
any help please
Click to expand...
Click to collapse
Maybe try other versions of Odin and firmware? Ensure your drivers on PC work. That's all I've got.
AaronCompNetSys said:
Maybe try other versions of Odin and firmware? Ensure your drivers on PC work. That's all I've got.
Click to expand...
Click to collapse
I fixed the problem. I reinstall the drivers and flash the stock firmware from the error screen.
Thank you!
i am also here, can anyone help me pls
kuddi said:
i am also here, can anyone help me pls
Click to expand...
Click to collapse
Uhm.. Did you read what @louforgiveno said? He gave the answer right at the top of the thread.. Just run odin in the warning screen window It'll still go!!
kuddi said:
i am also here, can anyone help me pls
Click to expand...
Click to collapse
I tried to flash my J7Pro and I got this same problem, I have updated all drivers and I tried others version of odin without any success, sometimes odin with crash and at times I would get this from odin, it would not pass setup connection (image submitted)
Django64 said:
I tried to flash my J7Pro and I got this same problem, I have updated all drivers and I tried others version of odin without any success, sometimes odin with crash and at times I would get this from odin, it would not pass setup connection (image submitted)
Click to expand...
Click to collapse
In your case i would try changing the COM port number assignment (to something low such as 1, 2 or 3.
Basically you open Device manager (while phone is plugged in, in download mode) and find the COM port (under COM/LPT) double click to open properties and go to advanced tab (if i remember the naming right) and then change the port assignment number to a low number as i stated above.
Then reboot PC and try to run odin again.
Good luck
Sent from my God Mode 8
Samsung J7 pro
louforgiveno said:
In your case i would try changing the COM port number assignment (to something low such as 1, 2 or 3.
Basically you open Device manager (while phone is plugged in, in download mode) and find the COM port (under COM/LPT) double click to open properties and go to advanced tab (if i remember the naming right) and then change the port assignment number to a low number as i stated above.
Then reboot PC and try to run odin again.
Good luck
Sent from my God Mode 8
Click to expand...
Click to collapse
Hi now I am getting Re-Partition operation failed
Django64 said:
Hi now I am getting Re-Partition operation failed
Click to expand...
Click to collapse
Have you unchecked re-partition on the odin Options tab? Be sure to check or un-check the required options based on what your are flashing.
Sent from my God Mode 8
odin failed for J7pro
louforgiveno said:
Have you unchecked re-partition on the odin Options tab? Be sure to check or un-check the required options based on what your are flashing.
Sent from my God Mode 8
Click to expand...
Click to collapse
Hi yes I did. my phone cannot turn off, lucky for me I have the LCD off so can disconnect the battery and retry
I have also tried changing the ports
(image submitted) this is what I am getting now.
Django64 said:
Hi yes I did. my phone cannot turn off, lucky for me I have the LCD off so can disconnect the battery and retry
I have also tried changing the ports
(image submitted) this is what I am getting now.
Click to expand...
Click to collapse
So the first thing i notice....if you look under "FAIL" (red box) it shows your com port as 16.....this com number should be changed to a single digit number 1-9 (preferably 1,2,3,4 or 5).
Google "change COM port assignment" for details with pics.
Sent from my God Mode 8
Oh yeah and duh!! I forgot another thing to try ...
Remove the (.md5) from the name of the odin files so they end with (.tar).
Hopefully one of the two "tricks" will work for you
Sent from my God Mode 8