IF YOU FOLLOW MY STEPS BELOW, YOU WILL LOSE YOUR WARRANTY, KNOX WILL DISPLAY 0x1!
Tested on Samsung Galaxy S5 G900H only
!DISCLAIMER!
Code:
[CENTER]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/CENTER]
When Downloading Kernel Please Select Respected Link Which You Want, Don't Flash Different Kernel For Different Rom
Features of this Kernel:
Different kernels for various Ports
Built with latest sabermod Toolchain 4.9, update 2016.02
Battery life improved
CPU Governors- performance, Powersave, Userspace, Ondemand, Interactiv (Default), Conservative
Built with latest ramdisk sources from samsung (CPJA)
Kernelsource from latest Update (Also CPJA)
Always be Permissive
Recommended app for tuning: Kernel Adiutor
The lastest TWRP IS RECOMMENDED!
Keep the kernel.zip in your ext sd/internal sd.
Boot to latest TWRP (recommended)
Take backup for anything goes wrong
Flash the Kernel.zip
WIPE DALVIK/CACHE (for good measure)
Reboot!
Download Link V1.0 for MM & S7 Ports only - GreenApple Kernel V1.0
Download Link V2.0 for MM & S7 Ports only - STOCK & S7 Ports
Download Link V2.0 for N7 Ports only - Note7 Ports
Download Link V2.0 for Grace UX Ports only - Grace UX Ports
XDA:DevDB Information
GreenApple Kernel, Kernel for the Samsung Galaxy S5
Contributors
somadsul
Source Code: https://github.com/somadsul/GreenApple_Kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V2
Stable Release Date: 2016-11-26
Created 2016-07-11
Last Updated 2016-11-27
V2.0 Change log
Various Release for Stock, For S7 Ports, Note 7 Ports, Grace UX Ports
Tremendous Battery backup & smooth Performance
Built with Latest CPJA Firmware
Built with Latest CPJA Ramdisk ( Thanks to @amtra & @yash92duster )
V1.0 Change log
Built with latest sabermod Toolchain 4.9, update 2016.02
Battery life improved
CPU Governors- performance, Powersave, Userspace, Ondemand, Interactiv (Default), Conservative
Built with latest ramdisk sources from samsung (APC8)
Kernelsource from latest Update (Also APC8)
Permissive
one more
The kernel is working. I lost root so I flashed it again via TWRP.
There's a bug: when the screen is off, and you want to turn it on, the device reboots. Could you fix that? And please add the option to set lower frequencies to the processors both big and LITTLE (The lower frequency currently is 800mHz on big and 500 on LITTLE)
Thanks for your work
Oh if there is a reboot bug then ill wait till it gets fixed after that ill flash it for reporting
herbypentier14 said:
The kernel is working. I lost root so I flashed it again via TWRP.
There's a bug: when the screen is off, and you want to turn it on, the device reboots. Could you fix that? And please add the option to set lower frequencies to the processors both big and LITTLE (The lower frequency currently is 800mHz on big and 500 on LITTLE)
Thanks for your work
Click to expand...
Click to collapse
Yes you will lost your Root you neex to flash Supersu again and there is not a single reboot from yesterday for me, working well,
For frequencies will do in next release.
somadsul said:
Yes you will lost your Root you neex to flash Supersu again and there is not a single reboot from yesterday for me, working well,
For frequencies will do in next release.
Click to expand...
Click to collapse
I havent had any reboot either
Maybe bcz we have used flashify and boot.img ??
Anyone knows why dualboot patcher cant set kernel on primary rom?
Yep it's working fine... no reboots... SELinux Is set to permissive... can use viper4android ...
---------- Post added at 04:54 PM ---------- Previous post was at 04:54 PM ----------
Will tell you about battery tomorrow after a 24hr cycle
Hey there... 2 things
1- battery draining faster on ondemand governed
2- random reboot thrice so far
great battery and phone isnt lag and this is was all i want thanks
I tried this kernel after u posted the link but couldn't find ur thread today at last I found ...No problem oly root went off just rooted again then everything seems to. Be normal
shahram Ali said:
great battery and phone isnt lag and this is was all i want thanks
Click to expand...
Click to collapse
Thanks Shahram is your project going on?
sonisamanvaya said:
Hey there... 2 things
1- battery draining faster on ondemand governed
2- random reboot thrice so far
Click to expand...
Click to collapse
Here you can see start time of my device there is not single reboot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
somadsul said:
Here you can see start time of my device there is not single reboot
Click to expand...
Click to collapse
Yeah surprisingly it has not rebooted for me since my report... which governer do u use?
sonisamanvaya said:
Yeah surprisingly it has not rebooted for me since my report... which governer do u use?
Click to expand...
Click to collapse
Till yesterday i was used Interactive from yesterday using powersave as I am in travel and out of station tomorrow will work more on this kernel.
Sent from my SM-G935F using Tapatalk
sonisamanvaya said:
Yeah surprisingly it has not rebooted for me since my report... which governer do u use?
Click to expand...
Click to collapse
Till yesterday i was used Interactive from yesterday using powersave as I am in travel and out of station tomorrow will work more on this kernel.
somadsul said:
Till yesterday i was used Interactive from yesterday using powersave as I am in travel and out of station tomorrow will work more on this kernel.
Click to expand...
Click to collapse
How do u change those settings in that kernel audit app u told to download sry I am new to these
adithyadinesh96 said:
How do u change those settings in that kernel audit app u told to download sry I am new to these
Click to expand...
Click to collapse
Open menu option in app
In Kernel Menu you can see CPU option select in scroll down and change your CPU freq
Sent from my SM-G935F using Tapatalk
Hi can you please give me some info about kernel development?
Because i am in my holidays and i would really be happy to develope sth for my own phone
thanks in advance.:laugh:
somadsul said:
Open menu option in app
In Kernel Menu you can see CPU option select in scroll down and change your CPU freq
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Thanks for developing for this phone..
Yea I got to change
Related
CyanogenMod 11 Nightly for G2 Mini D620
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Intro:
CyanogenMod 11 nightly build from source using @Zaaap72's sources for D620 with Cyanogen11Extended kernel by @Nikita Pro Android . Cross Compiled with SaberMod 4.8 and @JustArchi's optimizations! Also used latest Adreno Drivers.
Click to expand...
Click to collapse
Features:
Stock CyanogenMod 11
CC with SaberMod 4.8
JustArchi's Optimizations
Cyanogen11Extended Kernel
HTC's ASYNC FSYNC from faux123
Keyhandler Patch for Double Tap 2 Wake fomr Nikita Pro Android and Quarx2k
Adreno Drivers for performance and stability
SELinux Enabled and set to Permissive on boot
Features of Cyanogen11Extended:
CPU overclock to 1.6 GHz/underclock to 192 Mhz (default CPU freqs is 0.3-1.2 GHz, so you need to set up overclock and underclock in Kernel Auditor)
GPU overclock to 533 MHz
FAST CHARGE function (disabled by default - for enable use Fast Charge)
Default governor changed to ondemand
new CPU governors: INTERACTIVE, INTELLIDEMAND, INTELLIACTIVE, INTELLIMM, ZZMOOVE, YANKACTIVE, SMARTMAX, IMPULSE, ALUCARD, ADAPTIVE, WHEATLEY, DANCEDANCE, LIONHEART, SMARTASSV2 - experimental, on default parametres cpu works on max freq!
New I/O shedulers: BFQ, SIO, SIOPLUS, FIOPS, FIFO, VR, ZEN.[/SIZE]
Faux Sound Control (v3.4) function (to set it up use: FauxSoundControl App)
KEXEC HARDBOOT (you can use ROM with this kernel as INTERNAL in MultiROM)
intelli_plug (v3.8) (setting in the Kernel Auditor -> CPU Hotplug)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Working:
Phone
SMS/MMS
2G/3G/4G[Use QuickSettings Toggle for LTE]
Torch
GPS
Vibration
Camera
Video
Panorama
Bluetooth
WiFi
Double Tap 2 Wake
Click to expand...
Click to collapse
Not Working:
NFC(can be toggled on/off doesn't seem to work though)
Radio(????)
Click to expand...
Click to collapse
Installation:
Root
Unlock Bootloader
Flash custom recovery
Wipe system, data, cache, dalvik-cache
Optional but recommended:
Flash Stock 4.4.2 zip.
Full wipe again.
Install Rom
Enjoy
NOTE:
IF you are on 5.x FIRST flash a 4.4.2 Stock Rom(tested working) or the 4.4.2 bootstack(not tested) Otherwise rom won't boot!
Click to expand...
Click to collapse
DOWNLOADS:
V1.0 - 20150625:
ROM: XDA - Mirror
V2.0 - 20150723:
ROM: XDA
GAPPS:
http://forum.xda-developers.com/android/software/pa-gapps-continuation-t3098071
https://www.androidfilehost.com/?fid=95832962473395379
http://forum.xda-developers.com/android/software/reborn-gapps-t3074533
XDA:DevDB Information
[UNOFFICIAL][D620]CyanogenMod 11 Nightly, ROM for the LG G2 Mini
Contributors
Tse™, Zaaap72, Nikita Pro Android, @Quarx2k, @JustArchi, @invaderjohn, CM team, XDA University, jackeagle, SaberMod, @Radac Stunghthumz, @caspboy
Source Code: http://www.github.com/DTse
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 4.4.4
Based On: CyanogenMod
Version Information
Status: Testing
Current Beta Version: 2.0
Beta Release Date: 2015-07-23
Created 2015-06-27
Last Updated 2015-07-26
Reserved
Changelog:
1.0-20150625
Initial Release!
2.0-20150723
ASYNC FSYNC by HTC from faux123
KeyHandler fix thanks to AntonPanos
invaderjohn's Touchscreen tweaks
More NFC fixes from invaderjohn's repo
SELinux Enabled and set to Permissive on boot
QuickWindow fix(???)
Enabled Kernel modules
Reclaimed some RAM from loggers
Various tweaks
Click to expand...
Click to collapse
Reserved
It's my first rom ever! Hope you like my efforts!
Tse™ said:
It's my first rom ever! Hope you like my efforts!
Click to expand...
Click to collapse
Thanks. I'm about to flash it.
This rom makes my cm11 nightly thread obsolete, as yours has more features (built in cm11 extended kernel) and is built from source.
Thanks. Waiting you feedback!!! I plant to incorporate even more features such as KCAL color calibration and devfreq adreno idler(if it's needed) and many more i have fished out from various kernel's.
But first i must know it's stable enough.
Great! Another ROM.
I will flash it and I will inform You about how it works on my device.
Peace.
So far everything runs just fine, no issues.
For other people checking out this Thread that want to further optimize their phone:
Governors Explained
Extreme Battery Life Guide
L Speed Mod/Tweak (build.prop tweaks)
nkay08 said:
So far everything runs just fine, no issues.
For other people checking out this Thread that want to further optimize their phone:
Governors Explained
Extreme Battery Life Guide
L Speed Mod/Tweak (build.prop tweaks)
Click to expand...
Click to collapse
Great!!! I am really greatful. If anyone wants to join a test team that will include more roms in the future send me a pm. If the response is big enough maybe i'll setup a beta distribution system as well.
any possible support for D618 ?
Great! Thank you for you work
numpea said:
any possible support for D618 ?
Click to expand...
Click to collapse
Sure. Cyanogen11Extended kernel is designed for both d620 & d618 so i'll just have to built 2 kernel images and tweak the updater script a bit to suit our needs.
Tse™ said:
Sure. Cyanogen11Extended kernel is designed for both d620 & d618 so i'll just have to built 2 kernel images and tweak the updater script a bit to suit our needs.
Click to expand...
Click to collapse
Great !
Added file to project downloads !!!
Tse™ said:
Sure. Cyanogen11Extended kernel is designed for both d620 & d618 so i'll just have to built 2 kernel images and tweak the updater script a bit to suit our needs.
Click to expand...
Click to collapse
Can wait for d618.... great job brother..?
oneichal said:
Can wait for d618.... great job brother..
Click to expand...
Click to collapse
Something i thought llast night. If you know how i think it could work if you edit the updater-script(located in the META-INF folder) in my zip and change the first lines that say D620 to D618 and then put it back in flash the zip and after that flash the D618 Cyanogen11Extended from Nikitas topic (http://forum.xda-developers.com/g2-mini/development/kernell-cyanogen11extended-lg-g2-mini-t3113955).
That should do it pretty much cause for now i don't think i made some major mod to the kernel.
On other news most work i plan to do will be done after the weekend cause i have my term exams.
Oh don't forget the Greek referendum voting. Busy times over here. Go Greece. Don't forget to support us guys and girls, men and women!
Tse out!
I have tried your rom. There is camera overexposure in my case with latest version.
Also I have tried to add FM from CPA but it didn't work. But all in all it is nice looking ROM
predragiPredrag said:
I have tried your rom. There is camera overexposure in my case with latest version.
Also I have tried to add FM from CPA but it didn't work. But all in all it is nice looking ROM
Click to expand...
Click to collapse
you can fix overexposure by replacing these libs files in /system/vendor/lib and change permission to 644 and reboot https://www.dropbox.com/s/3d88k0p12iklgop/camera_fix_libs.zip?dl=0
Tse™ said:
Something i thought llast night. If you know how i think it could work if you edit the updater-script(located in the META-INF folder) in my zip and change the first lines that say D620 to D618 and then put it back in flash the zip and after that flash the D618 Cyanogen11Extended from Nikitas topic (http://forum.xda-developers.com/g2-mini/development/kernell-cyanogen11extended-lg-g2-mini-t3113955).
That should do it pretty much cause for now i don't think i made some major mod to the kernel.
On other news most work i plan to do will be done after the weekend cause i have my term exams.
Oh don't forget the Greek referendum voting. Busy times over here. Go Greece. Don't forget to support us guys and girls, men and women!
Tse out!
Click to expand...
Click to collapse
Thanks just flashed working like a charme
we just have to activate the dual sim fonction from terminal emulator
Code:
su
setprop persist.radio.multisim.config dsds
reboot and done :good:
[UNOFFICIAL][D620][2015626]CyanogenMod 11 Nightly
predragiPredrag said:
I have tried your rom. There is camera overexposure in my case with latest version.
Also I have tried to add FM from CPA but it didn't work. But all in all it is nice looking ROM
Click to expand...
Click to collapse
In my tests I didn't have any over exposure. In what conditions did you have it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[B][U]Since You are seeing this post then you are no longer concerned about your mobile warranty[/U][/B]
/*You are solely responsible for what you see here and what you do with your device.
*
* I am only here to share my project and to see if it help other people and am really grateful that you are reading this.
* Anything done wrong by yourself will not be my fault so understand it but you will get help if needed.
* You are choosing to make these modifications to your device and am not arousing you in any way, and if
* you point the finger at me for messing up your device, than you will be trolling me :rolleyes:.
/*
Features :
Faux sound V3.0 (Awesome for all the music lovers now control the sound of your device by the way you want. Needed App like Kernel Auditor to enable it.)
Fast USB Charge Added ( Super Fast Charge your phone with the PC and USB. Needed App like Kernel Auditor to enable it.)
Supports OTG
Vibration Control Feature(Set the Vibration Intensity at your will. Needed App like Kernel Auditor to enable it.)
Custom Governors Added(Needed App like Kernel Auditor to Use default Governor as you like.)
Color Intensity Control(Change your Color Intensity as you like. Needed App like Kernel Auditor to change the intensity it.)
Init.d support added in the kernel.
Balanced for daily use Whether for High Gaming or for Normal Use
Powersuspend Feature.
Added Fast ShutDown
Added I/O Scheduler (noop,deadline,row,cfq,bfq . Needed App like Kernel Auditor to change the default Scheduler.)
F2FS Support.
Z-ram Support.
ChangeLogs :
For Complete list of ChangeLog go here : https://github.com/dev-elixir/elixir-redmi2
Download Links:
AndroidFileHost/GoogleDrive
Installation Instruction :
Download the Zip/Img and place it in your Internal/External Memory.
Reboot your Device to recovery.
Flash the file which you downloaded earlier.
Wipe Cache and Dalvik Cache.
Reboot the device.
Note :
This is only for MM(Marshmallows) based ROMs
First backup your boot.img file either through recovery or by any app or take any boot.img(Kernel file) which works in your device as a backup plan if anything happens just fallback to the previous Kernel.
Click to expand...
Click to collapse
XDA:DevDB Information
ELiX1R, Kernel for the Xiaomi Redmi 2
Contributors
abhisri1997, ketut.kumajaya, Deadpool_01,ashish94,Tarun93,salahxda6805,Beast_SLayer
Source Code: https://github.com/dev-elixir/elixir-redmi2
Kernel Special Features:
Version Information
Status: Abandoned
Current Stable Version: R2
Stable Release Date: 2016-04-05
Created 2016-03-22
Last Updated 2016-04-18
Reserved
Kernel Updates & Changelogs :
ELiX1R-R2 :
*Added SIO I/O Scheduler.
*Lionfish and Darkness CPU Governor Added for balanced response.
*UnderVolted upto Some Extend to reduce voltage.
*Maximum Current Input Increased to 1500Ampere*Thanks to ashish.
*SeLinux: Set to Permissive.
*Added DT2W(Added Double Tap 2 Wake)*Thanks to Hakura and Pirej
ELiX1R-R2 Build Date 01-04-2016:
*Added msm_hotplug to Hotplug.
*Added CPU Idle Governor
*Added New Governors "Yankactive, ElementalX(Happy Gaming)"
*Added Support for fast charge (AC Source)
*Fixed Microphone issue(Added Commit from Undine Hydrogen)
ELiX1R-R2 Build: 05-04-2016:
*Added Support for OTA-Feature(Download the kernel from given link and flash then forget everything you will get kernel updates directly to your phone)
*Stability Fixes.
*Link : https://www.androidfilehost.com/?fid=24459283995313698
Gives error:1 with TWRP 3.0.0.3, can not flash.
nishan432 said:
Gives error:1 with TWRP 3.0.0.3, can not flash.
Click to expand...
Click to collapse
worked fine for mee no such errors and issues
nishan432 said:
Gives error:1 with TWRP 3.0.0.3, can not flash.
Click to expand...
Click to collapse
Use twrp from cm 13 thread.. Worked for me.
nishan432 said:
Gives error:1 with TWRP 3.0.0.3, can not flash.
Click to expand...
Click to collapse
Specify the ROM also which you are using...
whats the best settings for faux sound?
wakaranay said:
whats the best settings for faux sound?
Click to expand...
Click to collapse
use it as per your need and apply to boot
Awesome kernel
I am using CM 13 Nightly by EMFOX March 14th Build
This is one of the most stable and reliable kernel.
Fast charging is available even when charging from a PC or a Laptop.
Charges from 0 to 100 in approximately 2 hours.
Not much standby battery drain, only 5-8% (From night 12AM to Morning 7AM)
Working great with Brocken os. ? good work
1st i tell u im a game lover nd thanks for this great Custom kernel for our r2p
really Great Work @abhisri1997
I Played Some Heavy GAmes Like Gta lcs,Gta Sa, Gta VC,Gta 3,Dead Trigger 2,Nova 3 , BIA,3 Iron Man 3,Asphalt 8,Leos Fortune,Nd Many More Games i Played Nd Works Superb Evn i played nova 3 1 hours nd bttery drain only 17% means kernel have nice battery backup evn played heavy graphics games,
Sound Qlity juz massive man ! i install fauxsound control but not work properly ! but with kernel auditor work charm
Fast charge work nice i said its nice coz compare with berserk kernel elixer bit slow plz see that issue
i tested wirless mouse nd keybord they working awesome
overall its my testing review
used 1 day full with my fav rom tesla os
thanks man again for great work / respect @abhisri1997
omkarsnehal said:
1st i tell u im a game lover nd thanks for this great Custom kernel for our r2p
really Great Work @abhisri1997
I Played Some Heavy GAmes Like Gta lcs,Gta Sa, Gta VC,Gta 3,Dead Trigger 2,Nova 3 , BIA,3 Iron Man 3,Asphalt 8,Leos Fortune,Nd Many More Games i Played Nd Works Superb Evn i played nova 3 1 hours nd bttery drain only 17% means kernel have nice battery backup evn played heavy graphics games,
Sound Qlity juz massive man ! i install fauxsound control but not work properly ! but with kernel auditor work charm
Fast charge work nice i said its nice coz compare with berserk kernel elixer bit slow plz see that issue
i tested wirless mouse nd keybord they working awesome
overall its my testing review
used 1 day full with my fav rom tesla os
thanks man again for great work / respect @abhisri1997
Click to expand...
Click to collapse
These reviews are the things which keeps the developer boosting for their work , I am glad that you are satisfied and next time you face error try to collect some logs because I ain't having any error in my device though I can only help if the logs are there.
Is this compatible with both cm 13 and AOSP based ROMs?
Yaaaa compatible with all ROMs except miui
sajed98 said:
Is this compatible with both cm 13 and AOSP based ROMs?
Click to expand...
Click to collapse
Compatible with any marsmallow ROM...
nishan432 said:
Gives error:1 with TWRP 3.0.0.3, can not flash.
Click to expand...
Click to collapse
You are on Lenovo K3 Note and you are still trying to flash it!!!
abhisri1997 said:
ELiX1R-R2 :
*Added SIO I/O Scheduler.
*Lionfish and Darkness CPU Governor Added for balanced response.
*UnderVolted upto Some Extend to reduce voltage.
*Maximum Current Input Increased to 1500Ampere*Thanks to ashish.
*SeLinux: Set to Permissive.
Click to expand...
Click to collapse
Still no cpu hotplug?
Heresme said:
Still no cpu hotplug?
Click to expand...
Click to collapse
First tell me do you get any heating issue??
abhisri1997 said:
First tell me do you get any heating issue??
Click to expand...
Click to collapse
not much, but i think it will make battery life longer
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
KERNEL is S5 lastest source
Mixed with J5 sources
Soon fix bluelight inside kernel sources.
Source is here https://bitbucket.org/malbert16442/sparkplug-ux-kernel/src
G900T/G900F/G900I/
XDA HOSTING(Click here to download)
G900Korean coming soon
Kernel Features:
1.3 adds f2fs support will be removed in 1.5 to fix some issues
1.3 includes smaller optimizations for battery and speed
SparkPlug kernel has Hyper tool chain UberxSaber
CPU governor Added Intelliactive and 12 others
Boosted read and write speed
Fixed memory leakage
Improved power savings by lowering cpu max freq
Halt Cpu usage for 1ms when not in use
Neon kernel with graphite and Ccache
Ramdisk and Source with Lastest Selinux Commits
Fast Charging
CPU VOLTAGE Control
SCREEN COLOR SPACE Control
Screen feature Wake and Sleep
Double Tap to wake
Sweep to wake etc...
Battery Voltage Input
Row Scheduler by default
Reno by default
XDA:DevDB Information
Sparkplug, Kernel for the Samsung Galaxy S5
Contributors
malbert16442
Kernel Special Features:
Version Information
Status: Stable
Created 2017-02-21
Last Updated 2017-03-04
Looks Good...Downloading
Hello. I know a couple of apps which set up the kernel., many many apps out there. But I want from you to recommend one or two apps that doing this job better..
Sent from my SM-G900F using XDA Labs
adamaris1990 said:
Hello. I know a couple of apps which set up the kernel., many many apps out there. But I want from you to recommend one or two apps that doing this job better..
Sent from my SM-G900F using XDA Labs
Click to expand...
Click to collapse
kernel auditor
will the 900v be supported later on? i can test if that would help.
KazuDante said:
will the 900v be supported later on? i can test if that would help.
Click to expand...
Click to collapse
it is supported
oh ok thats great news, lastly does it only work with touchwiz or any 6.0.1 roms?
Ohhh nice to see this kernel on xda? i use with reds revenge rom and my s5 its happy hehe. Thanks for great job rom and kernel.
---------- Post added at 19:28 ---------- Previous post was at 19:26 ----------
KazuDante said:
oh ok thats great news, lastly does it only work with touchwiz or any 6.0.1 roms?
Click to expand...
Click to collapse
In name you see something like (tw)? This for TouchWiz bro.
krkhaha said:
Ohhh nice to see this kernel on xda i use with reds revenge rom and my s5 its happy hehe. Thanks for great job rom and kernel.
---------- Post added at 19:28 ---------- Previous post was at 19:26 ----------
In name you see something like (tw)? This for TouchWiz bro.
Click to expand...
Click to collapse
thats y i asked jus to make sure
No problem ofcourse.
I'm on xxx no limits 6.1 rom and after installing this kernel I lost root on my g900f.
EddieQuickSlvr said:
I'm on xxx no limits 6.1 rom and after installing this kernel I lost root on my g900f.
Click to expand...
Click to collapse
Install SuperSU again after flash this kernel.
YES! Been waiting for this!
Hi
It is very nice kernel
But i have questions
Does the battery life in it is good
Because i will install it on skies rom for my s5
And will enable always on display all day so i do not want to drain alot of battery and i play games alot too so i need a friendly battery and performance kernel
So is this kernel battery friend and is very good for performance
If it is friendly how much does it consume in hour of playing
And thanks
[email protected] said:
Hi
It is very nice kernel
But i have questions
Does the battery life in it is good
Because i will install it on skies rom for my s5
And will enable always on display all day so i do not want to drain alot of battery and i play games alot too so i need a friendly battery and performance kernel
So is this kernel battery friend and is very good for performance
If it is friendly how much does it consume in hour of playing
And thanks
Click to expand...
Click to collapse
For my use battery life is perfect but i don't play to much games and i don't use display on mode you can't ask while playing how much battery consume because you are playing and phone is used from cpu to memory etc..try it yourself and see the results
When i restar the phone it took 1 to 2 minutes to boot. Why is thatm just with this kernel Phoenix Rom
brayhanrd said:
When i restar the phone it took 1 to 2 minutes to boot. Why is thatm just with this kernel Phoenix Rom
Click to expand...
Click to collapse
Because the kernel install magisk and magisk makes boot long its not a bug
Going to add number of improvements in kernel
malbert16442 said:
Because the kernel install magisk and magisk makes boot long its not a bug
Click to expand...
Click to collapse
If they want they can modify the zip and flash only kernel and still using supersu
If you are already on my kernel and you want biweekly support for it check here
https://bitbucket.org/malbert16442/...9b4bf798466f4aacea9f71468/Releases/?at=master
These are nightly builds so I can't promise the same stability as original xda release.
So far its 1.5 nightly. 1.5 release is in 2 weeks
1.5 official will add G900L K and S support then you can use nightly
1.3 release stable now in download section. Must be on 1.3 before flashing nightly.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[COLOR=167c80]LineageOS 13.0 for Samsung Galaxy J5[/COLOR]
DISCLAIMER
Code:
Your warranty is now void.
I'm not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired, because the alarm app failed. Please
do some research if you have any concerns about features included
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
[COLOR=167c80]Bugs[/COLOR]
Code:
- Snapchat/Skype video recording
- FM audio.
- You tell me
[COLOR=167c80]Installation[/COLOR]
1. Make sure you're using stock 5.1.1.
2. Download the ROM build made for your device from the downloads section and GPU frequency limiting script if you need it.
3. Download Android 6.0.1 gapps (you may also use microg if you know how to do so as this ROM supports signature spoofing).
4. Transfer files you downloaded earlier to your phone's sdcard
5. Reboot to recovery mode. ( Vol UP + Home + Power ) (You'll needTWRP Recovery )
6. Do a full wipe in TWRP.
7. Install Lineage and GAPPS zips.
8. Reboot to system.
9. Setup your device.
That's it. Enjoy your new ROM.
[COLOR=167c80]Downloads[/COLOR]
[COLOR=167c80]ROM[/COLOR]
SM-J500FN
SM-J500F
[COLOR=167c80]GPU FREQUENCY SCRIPT[/COLOR]
400 Mhz
475 Mhz
550 Mhz
650 Mhz
[COLOR=167c80]Source[/COLOR]
My sources and the ones I've used are all available either on my github here: https://github.com/Koloses or Galaxy-J5 organisation here: https://github.com/Galaxy-J5/ Kernel source is here: https://github.com/Koloses/kernel_samsung_j5lte
That's it for now. Builds for the rest of J5 devices should come later on and will be the same as the ones for J500FN and J500F. I just need time to make them (Building MM takes 2-3h on my pc and I have to setup device trees too so yeah)
XDA:DevDB Information
LineageOS 13.0 for Galaxy J5, ROM for the Samsung Galaxy J5
Contributors
Koloses, Nick Verse, ganesh varma #Henkate
Source Code: https://github.com/Koloses
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Lollipop
Based On: LineageOS
Version Information
Status: Abandoned
Created 2017-03-05
Last Updated 2017-07-27
Addons & Stuff
Addons & OTA's
Last kernel update:
J500FN
J500F
Full changelog in comparision to the ROM bundled one:
- more charging changes
- merged patch mentioned by @ajislav
- updated display driver from MM kernel (implemented code left by ganesh)
- build cifs.ko and load it at boot
CAF Optimized System Webview
system_webview-m57-caf.zip
Changes in comparision to bundled one:
- Newer base version (M51 to M57)
- Built from Codeaurora sources (optimized for Snapdragon devices)
Wifi Direct & Screen mirroring fix
wifidirect-screenmirror-fix.zip
isn't this just gonna be the same as cm13
Mostly yes, but it's refreshed a little bit (newer android codebase as we have 6.0.1_r78 as far as I remember and CM13 has a little bit older base). It's also rebranded and we have some overlays fixed (charging overlays and 1080p recording in Snap camera). I also included newer Adreno blobs as you may see here . I will make seperate builds for the rest of J5 devices too later this week. I did some patches here and there since we won't get new CM13 builds anyway and custom MM for our devices still needs some love.
It also uses my kernel with recommended settings out of the box, so battery life should be better without installing any extra zips. People kept asking for it and most of them wouldn't build it for themselves so here it is
???? another rom
I hope this is better than the others?
You were compiling it in silence?
Demicro said:
???? another rom
I hope this is better than the others?
You were compiling it in silence?
Click to expand...
Click to collapse
This is for sure the best rom!
---------- Post added at 09:18 AM ---------- Previous post was at 08:38 AM ----------
@Koloses what is the best way to get root in Lineage OS 13? Because in developer options there's only ADB...
Flash SuperSU zip just like on every ROM.
Koloses said:
Flash SuperSU zip just like on every ROM.
Click to expand...
Click to collapse
In CM I always used the in built root option :good:
Somebody missclicked the rate button (1star).
@Koloses
I'm using it on my phone at this moment and seems that signature spoofing (for microG) is working.
And as I've told you, Skype video recording problem is present on cm12.1 and stock 5.1.1 too.
@Koloses by the way now it says "fast charging" :good:
So even snapchat recording not working .Is there any temporary fix ? btw thanks for the rom
AFAIK Snapchat recording doesn't work on any custom ROM > 7 (i don't know how it is Nougat) I tried debbuging it several times yet haven't found any solution to it and decided to release ROM without fixing it.
Sent from SM-J500 Lineage 13.0
I did not have this bug in any rom ,but i'll try it no matter
---------- Post added at 12:05 PM ---------- Previous post was at 12:03 PM ----------
forgot to ask ,should i flash gpu script or how ?
jonianU8160 said:
I did not have this bug in any rom ,but i'll try it no matter
---------- Post added at 12:05 PM ---------- Previous post was at 12:03 PM ----------
forgot to ask ,should i flash gpu script or how ?
Click to expand...
Click to collapse
Gpu script it's just for those who want limit the gpu overclock set by default to 720Mhz. If you encounter some overheating etc.
JosephDM said:
Gpu script it's just for those who want limit the gpu overclock set by default to 720Mhz. If you encounter some overheating etc.
Click to expand...
Click to collapse
What is the default gpu clock ?
jonianU8160 said:
What is the default gpu clock ?
Click to expand...
Click to collapse
400Mhz Anyway I suggest you leave it overclocked to 720Mhz because 3D performance is way better
jonianU8160 said:
What is the default gpu clock ?
Click to expand...
Click to collapse
400 MHz
JosephDM said:
400Mhz
Click to expand...
Click to collapse
I am getting annoying but what i understod is that if i want gpu overclocked i should flash this script or only if im getting overheating slowdowns
jonianU8160 said:
I am getting annoying but what i understod is that if i want gpu overclocked i should flash this script or only if im getting overheating slowdowns
Click to expand...
Click to collapse
You limit the GPU frequency to 400Mhz (stock frequency) if you dont want overclock or for whatever reason you want.
The script is an init.d script which limit the GPU frequency at boot according the script you choose. You have to flash the zip in TWRP recovery.
I didnt try, but you can also use Kernel Adiutor and choose e.g. 400Mhz and toggle "apply on boot".
#Henkate said:
Somebody missclicked the rate button (1star).
@Koloses
I'm using it on my phone at this moment and seems that signature spoofing (for microG) is working.
And as I've told you, Skype video recording problem is present on cm12.1 and stock 5.1.1 too.
Click to expand...
Click to collapse
You missclicked on Nougat threads too
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include "std_disclaimer.h"
/*
* Your warranty is void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
READ THE WHOLE OP!
THIS KERNEL IS END OF LIFE. IT IS/WILL BE INTEGRATED IN NEXUSOS ROMS.
This is a custom kernel for S6 which lets you change the things you want in the kernel. It was born from tests, errors and a lot of hardwork to give you the most stable features.
I want it to be almost as stable as stock.
Features:
based on latest TeamNexus sources
Google's TC v4.9
Linux kernel version 3.10.108
permissive
Synapse support
CPU underclock: 200 MHz (little / big)
CPU overclock: 1704 MHz / 2304 MHz (little / big)
GPU underclock: 100 MHz
GPU overclock: 852 MHz
GPU governor selection in Synapse
voltages control for both CPU and GPU
memory bus voltage control
CCACHE and GRAPHITE optimizations
KSM support
ZSwap control
working init.d support
SafetyNet bypass
use Android device as USB keyboard/mouse (no driver required; compatible with any OS and BIOS)
DriveDroid patch
new IO schedulers: ROW
enabled these: all CPU governors, TPC congestions, IO schedulers, USB OTG support, CIFS support, TTL support, XBOX controller support, ISO support, UDF CD-ROM support, NTFS R/W support
Double tap to wake
Synapse profile backup/restore
sqlite3 installed in /system/xbin
Spectrum profiles
HMP voltage control
Doze control
fake Enforcing SELinux
live statistics in Synapse
S7 Edge battery support (the true capacity displaying is buggy)
Knox Warranty bit 0x1 to 0x0 (the eFUSE is still blown, just a software fix)
Bugs:
- DT2W not working in v2.0
PLEASE READ THE FAQ!
Installation:
0. Backup is mandatory!!!
1. Download the latest kernel version zip file
2. Go to recovery
3. Flash the kernel zip
4. If you were rooted then flash root again otherwise you'll get a bootloop
5. Enjoy
Optionally, install Kernel Adiutor from Play Store to get control over the kernel. Install Synapse from Play Store or Synapse MOD (read FAQ).
Tell me if the kernel is working with your ROM.
If you want to contribute just PM me
If you press the Thanks button then Chuck Norris will visit you
If you want to revert all the changes, just restore boot partition.
Subscribe to be always informed about what's going on.
Downloads:
See Android File Host.
Select your device (Flat/Edge) then AldeXus Kernel then your model. Don't look at popular downloads.
XDA:DevDB Information
AldeXus Kernel, Kernel for the Samsung Galaxy S6
Compatibility
Models:
G92xF
G92xI
G92xP
G92xS
G92xT (maybe)
G92xW8
Custom ROMs:
LineageOS 15.x
NexusOS 8.x
Credits:
The Sickness (his guide and scripts)
UpInTheAir (resetprop)
thehacker911 (Synapse files base)
Others I've used the commits from
Source Code: GitHub
Contributors
minealex2244
Version Information
Status: Stable
Current Version: 2.0
Created 2017-11-03
Last Updated 2018-01-10
Changelog
***1.0***
- initial release
***1.1***
- updated to Linux 3.10.108
- WiFi driver is no longer built in Legacy Mode
***1.1.1***
- updated sources
- added support for all the supported devices
***2.0***
- updated sources
- support for 8.1
FAQ
1. Screen mirroring is not working. Is it kernel related?
No. It is root related. Just add this to your /system/build.prop :
Code:
wlan.wfd.hdcp=disable
2. Bootloop.
Did you flashed SuperSU or Magisk again? Maybe you were rooted before and you need to reflash root. Pay attention to OP instructions and to the text printed in recovery.
3. Thank you for this kernel.
But can you please help me to get surround sound on my S6?
Sure, here.
4. How to enable multiuser support?
Add these to your build.prop:
Code:
fw.show_multiuserui=1
fw.max_users=5
5. Synapse is saying:
- "No UCI support" → Close the app from recents and open it again. If still no UCI support then PM me with the output of this command: uci (run it with su permissions).
- "JSON configuration parsing failure" → Using a file manager go to /res/synapse and delete a file named "config.json", close Synapse then open again, UCI error, reopen and done.
- The apply and discard buttons appeared for no reason. Which one should I click? → Click "X". This is a bug in Synapse.
- Is there a mod for Synapse? → Yes, Morogoku worked on it and I modified it a little bit to match our kernel and I built it. Get it from the attachments below. All the credits are going to Morogoku. It features backup/restore profile option and a red material theme.
6. Where to install BusyBox? In /su/xbin or /system/xbin. I'm using SuperSU and Synapse is working perfectly. After each boot up I highly recommend you to check the Synapse settings, especially CPU OC to see if everything is ok.
7. How to build your kernel from source?
After you git cloned it, open terminal in the root of the cloned folder and enter this: "sudo bash build_kernel.sh G920F" (or your model). Choose stock dt.img during building process.
8. XYZ not working. PM me with logs and screenshots.
Thanks! I'll try it later
Sent from my SM-G920F using Tapatalk
First, thanks for the great kernel.
It works perfectly on my g920i except for magisk is now frequently auto unrooting. I reflashed it several times but keeps unrooting after a few minutes. Any ideas for a solution?
Sent from my SM-G920F using Tapatalk
M.Saka said:
First, thanks for the great kernel.
It works perfectly on my g920i except for magisk is now frequently auto unrooting. I reflashed it several times but keeps unrooting after a few minutes. Any ideas for a solution?
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
Flash magisk 12 and use magisk manager 4.X
It should work.:good:
M.Saka said:
First, thanks for the great kernel.
It works perfectly on my g920i except for magisk is now frequently auto unrooting. I reflashed it several times but keeps unrooting after a few minutes. Any ideas for a solution?
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
Sir, please read again FAQ. It's very important. MagiskSU is loosing root. SuperSU works perfectly.
hey buddy got a question after i clone source and download tool chain and all that good stuff how do i build for G920T bc in env_setup there is no G920T so when i run build_kernel.sh G920T i get nothing and i want to edit the menuconfig but i dunno no which config to buil...any help plz.. thanks for the kernel
fowler82 said:
hey buddy got a question after i clone source and download tool chain and all that good stuff how do i build for G920T bc in env_setup there is no G920T so when i run build_kernel.sh G920T i get nothing and i want to edit the menuconfig but i dunno no which config to buil...any help plz.. thanks for the kernel
Click to expand...
Click to collapse
Right now I'm working on adding other models support. Keep an eye on my GitHub commits.
minealex2244 said:
Right now I'm working on adding other models support. Keep an eye on my GitHub commits.
Click to expand...
Click to collapse
When do you think other models will be done?
Can you add stock voltages?
Team nexus added custom voltage and phone don't boot
brujo55 said:
Can you add stock voltages?
Team nexus added custom voltage and phone don't boot
Click to expand...
Click to collapse
My phone booted up normally. Which model?
brujo55 said:
Can you add stock voltages?
Team nexus added custom voltage and phone don't boot
Click to expand...
Click to collapse
I have the same problem model 920f phone don't boot
Thanks you ! . but it has'nt oreo rom port . i used to aldeon kernel 3.4 . it is very well! . you should creat a group on telegram
PlusFK said:
Thanks you ! . but it has'nt oreo rom port . i used to aldeon kernel 3.4 . it is very well! . you should creat a group on telegram
Click to expand...
Click to collapse
Sorry but I didn't understand this part: "it has'nt oreo rom port . i used to aldeon kernel 3.4".
minealex2244 said:
Sorry but I didn't understand this part: "it has'nt oreo rom port . i used to aldeon kernel 3.4".
Click to expand...
Click to collapse
Hey mate, have u tried it on nexusOS rom (4/11 build)?
Sent from my SM-G920F using Tapatalk
M.Saka said:
Hey mate, have u tried it on nexusOS rom (4/11 build)?
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
Where is that build (link please)?
minealex2244 said:
Where is that build (link please)?
Click to expand...
Click to collapse
Sure, here
https://files.nexus-roms.eu/Samsung/zero/8.0.0/2017-11-04/
They just switched from LineageOS to NexusOS
Sent from my SM-G920F using Tapatalk
M.Saka said:
Sure, here
https://files.nexus-roms.eu/Samsung/zero/8.0.0/2017-11-04/
They just switched from LineageOS to NexusOS
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
It works with it.
minealex2244 said:
It works with it.
Click to expand...
Click to collapse
Great news [emoji1]
Thanks man
Sent from my SM-G920F using Tapatalk