thanks Ultrametric
Related Articles:
http://en.miui.com/thread-242834-1-1.html
the method is very easy,only need change lte_bc_config value,
First
Flash develop rom version,
Get the root right
Tools:
QPST.2.7.434.msi
QXDM 3.12.714
Tools and drivers download link:
http://pan.baidu.com/s/1slWuP8D
network signal Gura
https://play.google.com/store/apps/details?id=com.qtrun.QuickTest
use QXDM to change the value of lte_bc_config from 2061584302149 to 2061752272095,
save and restart,
done.
unfortunately mi5 cannot support band20
only support below bands
B1 2 3 4 5 7 8 11 17 18 26 28 38 39 40 41
View attachment 3816110
before unlock bands：
View attachment 3816140
after unlock bands:
View attachment 3816141View attachment 3816142
I check mi5 RF NV files.
these is no band 20 configuration in mi5 NV files ,
even if set band 20 in lte_bc_config and unlock band 20，
but actually not support，
you cannot search and use band20 signal
after unlocked, I verified band5 850MHZ , it works fine
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
there are only band 3、5、40 in my area， so I cannot verify other bands，
you guys can test in your area，
and quote the test result snapshot in this thread，
thanks
It would be better if you could give us more detailed instructions.
detailed instructions needed. Trying to enable Band 5 for LTE on my Mi5
I wrote 2061752272095 to lte_bc_config in my device NVRAM but I still cannot connect to LTE networks in the USA. In the app LTE Discovery (not sure how to use Network Signal Guru) it just says "N/A" under LTE connection.
Has anyone else had any luck using this method? I am using a brand new Mi5 Pro.
---------- Post added at 10:56 PM ---------- Previous post was at 10:45 PM ----------
The value 2061584892127 from the post in the OP also does not change things for me (can't post the actual link to the post here since I am a new user).
The image that is "supported bands for LTE". What app did you use to access that. Is it within device ?
---------- Post added at 09:31 AM ---------- Previous post was at 09:30 AM ----------
ha tsu yu me said:
I wrote 2061752272095 to lte_bc_config in my device NVRAM but I still cannot connect to LTE networks in the USA. In the app LTE Discovery (not sure how to use Network Signal Guru) it just says "N/A" under LTE connection.
Has anyone else had any luck using this method? I am using a brand new Mi5 Pro.
---------- Post added at 10:56 PM ---------- Previous post was at 10:45 PM ----------
The value 2061584892127 from the post in the OP also does not change things for me (can't post the actual link to the post here since I am a new user).
Click to expand...
Click to collapse
I think you need to be rooted
---------- Post added at 09:34 AM ---------- Previous post was at 09:31 AM ----------
nforce4 said:
thanks Ultrametric
Related Articles:
http://en.miui.com/thread-242834-1-1.html
the method is very easy,only need change lte_bc_config value,
First
Flash develop rom version,
Get the root right
Tools:
QPST.2.7.434.msi
QXDM 3.12.714
Tools and drivers download link:
http://pan.baidu.com/s/1slWuP8D
network signal Gura
https://play.google.com/store/apps/details?id=com.qtrun.QuickTest
use QXDM to change the value of lte_bc_config from 2061584302149 to 2061752272095,
save and restart,
done.
unfortunately mi5 cannot support band20
only support below bands
B1 2 3 4 5 7 8 11 17 18 26 28 38 39 40 41
View attachment 3816110
before unlock bands：
View attachment 3816140
after unlock bands:
View attachment 3816141View attachment 3816142
I check mi5 RF NV files.
these is no band 20 configuration in mi5 NV files ,
even if set band 20 in lte_bc_config and unlock band 20，
but actually not support，
you cannot search and use band20 signal
after unlocked, I verified band5 850MHZ , it works fine
View attachment 3816112
View attachment 3816111
there are only band 3、5、40 in my area， so I cannot verify other bands，
you guys can test in your area，
and quote the test result snapshot in this thread，
thanks
Click to expand...
Click to collapse
How did you get that to show up which LTE s are available. Is it an app or within phone. I'm referring to your image
" supported LTE networks"
Hello, somebody can unlock and work band 4 or ,28?
Enviado desde mi A0001 mediante Tapatalk
caruandroid said:
How did you get that to show up which LTE s are available. Is it an app or within phone. I'm referring to your image
" supported LTE networks"
Click to expand...
Click to collapse
Link is on the first post: https://play.google.com/store/apps/details?id=com.qtrun.QuickTest.
Anyone else tried this,did it make it work on other Mi5 in Europe? please leave feedback and screenshots here.
Trimis de pe al meu MI 5 folosind Tapatalk
laueugen said:
Anyone else tried this,did it make it work on other Mi5 in Europe? please leave feedback and screenshots here.
Trimis de pe al meu MI 5 folosind Tapatalk
Click to expand...
Click to collapse
I've done this myself. I tried to unlock bands 2, 4 and 12 for Tmobile in USA. No go. not getting LTE
http://forum.xda-developers.com/showpost.php?p=62147787&postcount=49
have you tried this value instead?
Hi OP, does this only work with dev rom? How about MIUI 8 stable?
prince10t said:
Hi OP, does this only work with dev rom? How about MIUI 8 stable?
Click to expand...
Click to collapse
This also works on other ROM
Confirmed work on CM13, (only step to enable diag is different)
band 5 & 8 fully unlocked. No band 20 of course.
Step also very simple, as we only need to restore QCN file using QPST software download.
Amazing work !!
How to enable diag on Cm13?
Sent from my MI 5 using XDA-Developers mobile app
prince10t said:
Hi OP, does this only work with dev rom? How about MIUI 8 stable?
Click to expand...
Click to collapse
sdujolo said:
How to enable diag on Cm13?
Sent from my MI 5 using XDA-Developers mobile app
Click to expand...
Click to collapse
through adb run this command,
adb usb
adb shell
setprop sys.usb.config diag,diag_mdm,qdss,adb
Your phone shpuld be detected in QPST by then.
Don't forget to install Mi5 qualcomm driver first.
prince10t said:
Hi OP, does this only work with dev rom? How about MIUI 8 stable?
Click to expand...
Click to collapse
this didnt work global stable. this work on developer ROM,
or i cant run on stable miui7 and i flashed miui8 developer global, this is worked
Just for the info, band 20 (LTE800) is supported in international version only.
China version lacks hardware in order for b20 to be supported.
B20 can be "enabled" in software, but that alone won't catch any signal at all.
Hi OP. if something goes wrong, can I still rollback just the way it was working before if I have a NANdroid backup?
Im using MIUI 8 EU stable rom with TWRP as recovery.
Confirmed band 5 working on AT&T LTE after the modification.
Network Signal Guru in order to showing the enabled bands like in screenshots above the device should be rooted or its not necessarily?
Trimis de pe al meu MI 5 folosind Tapatalk
laueugen said:
Network Signal Guru in order to showing the enabled bands like in screenshots above the device should be rooted or its not necessarily?
Trimis de pe al meu MI 5 folosind Tapatalk
Click to expand...
Click to collapse
Yes, ROOT is needed in order for detailed info to function. Ive just tested that twice today in 2 different unrooted phones.
Related
Hey folks. I recently got an LG spectrum 2 (vs930, 4g LTE verizon phone. GSM quad band unlocked)
I'm using lycamobile(prepaid) but for information sake I have tried with an ATT sim, tmobile sim, and this lycamobile sim. APN setup.
Calls, Text, and Data all work fine. Contacts to and from sim card works fine.
But I have this ONE notification(no matter which sim is inserted) on my status bar that will NOT go away. Its on the right side so there is nothing in the drop down shade about it. I have exhausted google and can't come up with anything.
If you know what this is, PLEASE tell me. It's not the same as the sim+cog notification. I've removed simtoolkit and it stays.
I just want to get rid of it something fierce.
http://i.imgur.com/4rE8ZK7.jpg
Im interested too, im using it outside USA (Mexico) on gsm and that icon appear with this carrier's TELCEL, IUSACELL, Unefon but if I insert a Movistar sim card the icon disappears... that's rare
I have exposed framework so I think maybe a module can hide it
Enviado desde mi VS930 4G mediante Tapatalk
perhaps, your sim card need to be registered, but if everything work fine, it's weird, maybe you should go to your phone store, and ask it there...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Everything work fine, and I see everybody using it on gsm have the same icon, the weird think is why with Movistar sim that icon don't appear, same icon spear on my LG intuition and again with Movistar disappear... only with that carrier Sim cards
So I was searching a mod that can hide the icon I think there should be a way to do it
Enviado desde mi VS930 4G mediante Tapatalk
Finally I take out that unknown SIM icon from notification bar...
To make it disappears just do the follow steps.
1.-you should be rooted
2.-with a root explorer or build.prop editor modify this line:
ro.build:target_operator=VZW
To this:
ro.build:target_operator=OPEN
3.- reboot your phone and done, that icon will never apear again
I try this and is successful in my spectrum 2 and my lg intuition (in this model the line apear twice, modify both), so I think this should work with other models like the Lg-G2... just try it doing a backup first
Enviado desde mi VS930 4G mediante Tapatalk
carlosirai said:
Finally I take out that unknown SIM icon from notification bar...
To make it disappears just do the follow steps.
1.-you should be rooted
2.-with a root explorer or build.prop editor modify this line:
ro.build:target_operator=VZW
To this:
ro.build:target_operator=OPEN
3.- reboot your phone and done, that icon will never apear again
I try this and is successful in my spectrum 2 and my lg intuition (in this model the line apear twice, modify both), so I think this should work with other models like the Lg-G2... just try it doing a backup first
Enviado desde mi VS930 4G mediante Tapatalk
Click to expand...
Click to collapse
Don't try the above steps with LG G2.
I essentially bricked my device. I am still trying to unbrick my device at this moment
andywxy said:
Don't try the above steps with LG G2.
I essentially bricked my device. I am still trying to unbrick my device at this moment
Click to expand...
Click to collapse
Sorry ear that thats why i suggest do a backup first, any way you can flash it with flash tool and get it working again, and I try in both models that I put above and work flawless
Sorry again
carlosirai said:
Sorry ear that thats why i suggest do a backup first, any way you can flash it with flash tool and get it working again, and I try in both models that I put above and work flawless
Sorry again
Click to expand...
Click to collapse
No worries, it's not your fault. My bad didn't do a backup, and I was distracted at the time of editing the build.prop that I might have messed up something, like added an additional character somewhere for example(not too sure now). I was too anxious to get rid of that darn sim icon, lol.
Anyways I was able to flash my phone back to default setting and working now. You said you have tried this method on G2 with success, is it running 4.4.2?
andywxy said:
No worries, it's not your fault. My bad didn't do a backup, and I was distracted at the time of editing the build.prop that I might have messed up something, like added an additional character somewhere for example(not too sure now). I was too anxious to get rid of that darn sim icon, lol.
Anyways I was able to flash my phone back to default setting and working now. You said you have tried this method on G2 with success, is it running 4.4.2?
Click to expand...
Click to collapse
I dont try in g2, i try in spectrum 2, and intuition and i think it should work in other lg phones as g2, but maybe in jellybean... Kk is diferent, i use g2 but sprint and it dont show any strange icon on gsm out of the box
carlosirai said:
I dont try in g2, i try in spectrum 2, and intuition and i think it should work in other lg phones as g2, but maybe in jellybean... Kk is diferent, i use g2 but sprint and it dont show any strange icon on gsm out of the box
Click to expand...
Click to collapse
Ah I see. A side question completely off topic, Sprint g2 works with gsm out of the box? No sim unlock is needed?
No sim unlock needed, but need root it and change one folder on system... And as i know it only work outside us... I'm from mexico
Sent from my Dreamed lumia 928 using Tapatalk
Hello, I read your question and I own a Verizon galaxy note 2, and I found 2 methods to get rid of that icon:
1.- use titanium backup (root reqquired) to freeze app called setup wizard.
2.- use "appmgr III" available in play store to again, freeze the app mention above.
I believe no backup is needed, but it's always recommended to do one. In case these methods causes app force closes then you can simply unfreeze the app..
Hope it helps.. :thumbup:
Sent from my SCH-I605 using XDA Free mobile app
darb1985 said:
Hello, I read your question and I own a Verizon galaxy note 2, and I found 2 methods to get rid of that icon:
1.- use titanium backup (root reqquired) to freeze app called setup wizard.
2.- use "appmgr III" available in play store to again, freeze the app mention above.
I believe no backup is needed, but it's always recommended to do one. In case these methods causes app force closes then you can simply unfreeze the app..
Hope it helps.. :thumbup:
Sent from my SCH-I605 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the information, but that didn't work either It's probably the difference between Samsung and LG.
carlosirai said:
Im interested too, im using it outside USA (Mexico) on gsm and that icon appear with this carrier's TELCEL, IUSACELL, Unefon but if I insert a Movistar sim card the icon disappears... that's rare
I have exposed framework so I think maybe a module can hide it
Enviado desde mi VS930 4G mediante Tapatalk
Click to expand...
Click to collapse
Disculpa el Spectrun 2 vien ya desbloqueado de fabrica oh pagaste para que te lo desbloquearan lo quiero usar en Telcel y si pagaste dime dnd xfa
Patronrex said:
Disculpa el Spectrun 2 vien ya desbloqueado de fabrica oh pagaste para que te lo desbloquearan lo quiero usar en Telcel y si pagaste dime dnd xfa
Click to expand...
Click to collapse
Ya viene libre de fabrica solo metes tu chip y listo
How??
How did you manage to put all the word OPEN in to the G2? It only allow OPE :/
Plz how did u restore ur phone i try to do but it impossible pleeeeeeeeeeeeez
---------- Post added at 10:38 AM ---------- Previous post was at 10:34 AM ----------
andywxy said:
Don't try the above steps with LG G2.
I essentially bricked my device. I am still trying to unbrick my device at this moment
Click to expand...
Click to collapse
plz how do u restore ur g2 verizon i brick my g2 & i cant restore it pleeeeeeeeeeeeeeez
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am not responsible if this breaks your phones! this was made just for fun and to help the community
Working:
Data
Messaging
Video recording
SDCard Read/Write
Root
Display
Touch screen
Profiles (Multi Users)
Google Account Syncing
Everything else
Not Working:
NFC
Video Play Back- From what I can tell it is a CM bug
How to install:
Download the ROM, GSM Patch, Gapps and save them
Boot into TWRP and make a backup of your current ROM
Wipe your Cache, Data, System and Dalvik Cache
Flash the files in this order:
1) ROM
2) GSM Patch File
3) Gapps
Now reboot and setup your phone
Downloads:
ROM: Link removed until I can figure out the video bug
GSM Patch: Latest GSM patch file
Gapps: My preferred 5.1.1 Gapps
Addons:
ZV4 Modem
ZV8 Modem
Mega APN Flashable
Latest (Stable) SuperSU flashable
This took like 15 minutes to get working .... So please show your support by clicking the :good: button
XDA:DevDB Information
[ROM][GSM][UNOFFICAL][5.1.1] CM12.1, ROM for the Sprint LG G3
Contributors
1619415, Ki11aprime
Source Code: https://github.com/CyanogenMod/android_device_lge_d851/tree/cm-12.1
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-06-10
Last Updated 2015-06-10
Reserved
Oh yeah baby. Cant wait to test drive this.
Sweet! ROM file states that it is for 851 model?
I am downloading now but when I did the ROM DL the docs file says d851 its for the ls990 right? Just wanted to make sure! Anyone flashed this on their ls990 with success? Thanks can't wait to try!
EDIT: I am having a hard time downloading the ROM it tries to start but never does. Any ideas ? Thanks!
EDIT2: I got it to DL by using the asop stock browser! I am getting my batt up some then I'll flash! Thanks!
ok will try it out right now, and report back...
savannahmick said:
I am downloading now but when I did the ROM DL the docs file says d851 its for the ls990 right? Just wanted to make sure! Anyone flashed this on their ls990 with success? Thanks can't wait to try!
Click to expand...
Click to collapse
I have it running on my phone now.... Just follow the install guide and it will work great.
Flashed and it, GSM works out of the box, i still have no Cell data tho :S .... if i could just acces the COM port to add additional bands or to see what bands it has enabled i could see if i can enable data, but other than that, it detects the SIM right away
kiewirevo said:
Flashed and it, GSM works out of the box, i still have no Cell data tho :S .... if i could just acces the COM port to add additional bands or to see what bands it has enabled i could see if i can enable data, but other than that, it detects the SIM right away
Click to expand...
Click to collapse
OK, awesome
1619415 said:
OK, awesome
Click to expand...
Click to collapse
do you know how i can acces the COM port? i want to try the band enabling stuff from another post but i need the phone to be set to "charge only" and be detected as a COM port... any ideas?
kiewirevo said:
do you know how i can acces the COM port? i want to try the band enabling stuff from another post but i need the phone to be set to "charge only" and be detected as a COM port... any ideas?
Click to expand...
Click to collapse
Stock, Barepop or the pure stock rom then I think there is a guide....
Is video playback broken or just me? Also if I unlock the LTE bands using a stock ROM then come back to this ROM everything should still be good right?
Cuz_Murica said:
Is video playback broken or just me? Also if I unlock the LTE bands using a stock ROM then come back to this ROM everything should still be good right?
Click to expand...
Click to collapse
Not sure....
1619415 said:
Not sure....
Click to expand...
Click to collapse
I'm a do it anyway. No harm no foul.
Cuz_Murica said:
Is video playback broken or just me? Also if I unlock the LTE bands using a stock ROM then come back to this ROM everything should still be good right?
Click to expand...
Click to collapse
First post NFC not working. Also video play back ?????.
localpagefirst said:
First post NFC not working. Also video play back ?????.
Click to expand...
Click to collapse
Yes, it is a CM bug from what I can tell..... I will update in a few days/weeks and see if that fixes it
Hey man i have this idea for my phone, I've tried to add the bands and everything and it seem to have worked (take it with a grain of salt), since i can choose any band now and it says "SUCCESS"... i enter in the modemsettings and i'm able too choose any network i want, before i wasn't able to choose all of them and now there is no problem after editing the NV values from the post...
now i am not entirely sure but since the WCDMA band my operator works with is 900 i think it does not detect it because of the "Model #" so my idea is as followed, i see you took the cm12.1 from a d851 and made it flashable, can you do the same for a d855 (which is the international version) and PM me or post it?, i will happily try it and see if i can get 3G... as for the LTE bands i can choose any as well but my problem is that i don't have an LTE subscription :V so i cant test that, im only limited to 3G....
you think you can help?
kiewirevo said:
Hey man i have this idea for my phone, I've tried to add the bands and everything and it seem to have worked (take it with a grain of salt), since i can choose any band now and it says "SUCCESS"... i enter in the modemsettings and i'm able too choose any network i want, before i wasn't able to choose all of them and now there is no problem after editing the NV values from the post...
now i am not entirely sure but since the WCDMA band my operator works with is 900 i think it does not detect it because of the "Model #" so my idea is as followed, i see you took the cm12.1 from a d851 and made it flashable, can you do the same for a d855 (which is the international version) and PM me or post it?, i will happily try it and see if i can get 3G... as for the LTE bands i can choose any as well but my problem is that i don't have an LTE subscription :V so i cant test that, im only limited to 3G....
you think you can help?
Click to expand...
Click to collapse
which guide did you use to add bands?
xevildoerxx said:
which guide did you use to add bands?
Click to expand...
Click to collapse
this one:
http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
but be extremely carefully a flash to stock will make you lose your ESN and MEID and you will have to enter a new IMEI from another phone to make it usable on GSM again...
also adding bands is kind of a tedious process, so you need to thoroughly check if they where properly added (with shortcutmaster in modemsettings) if you get a FAILED or SUCCESS, because its a pain to flash to stock>root>unlock bootloader over and over again to do the process all over again.
But as far as i know ive been able to add all the bands but the one i use "WCDMA 900" i not readed by the phone, even if i set the band only to check that, i can also check every LTE band now but i cant prove if it works or not.
View attachment 3357210
http://www.lg.com/us/cell-phones/lg-LS990-Metallic-Black-g3/technical-specifications
kiewirevo said:
this one:
http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
t.
Click to expand...
Click to collapse
Which ROM did you flash to do it?
Hi my friends,
Recently, my Samsung J7 Pro phone updated to Android 8.1 and touch does not work.I have found and fixed the bug, and I want to share it with you. Follow my post.
BYPASS FRP:
The first condition is FRP must OFF , if ON you have to login your google account or you need to follow the following steps:
Download and install Samsung driver : SAMSUNG_USB_Driver_for_Mobile_Phones.zip (15.3MB)
Download last version (supported Android 8): Odin 3.13.1
Download and flash combination rom J730G (binary 5): COMBINATION_OXA_FA70_J730GDXU5ARI1.rar (423M)
Then, open IME app on Home Screen and type *#0808# > choose (DM + ACM + ADB) > Reboot
Power off your phone > reboot to Download Mode and flash full rom (binary 5), but select only 3 files: BL - AP - HOME_CSC (J730GDXU5BRI3_J730GOLB5BRI3_XXV_8.1_FULL.zip -
After pass, your phone will reboot. Using OTG + mouse to activate to Home screen > go to Settings > Factory reset
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FIX TOUCH DOES NOT WORK:
I. Turn ON "OEM Unlock" in "Developer Options"
Using OTG + Mouse, go to Setting > Developer options > OEM Unlock. If OEM Unlock is hiding or RMM State: Prenormal*(in Download Mode), you need to:
Power off and reboot to Download Mode
Download and run Miracle tool (run in .rar file): Miracle_Box-227-chuan.rar
Choose Samsung*tab > tick to Reset Reactivation/EE Locks > click*Start Button > tool will show All Done...
Your phone will be stuck on the Download Mode > press Power + Home + Volume Down > your phone will reboot to error screen:
Open Odin and flash full rom (J730GDXU5BRI3_J730GOLB5BRI3_XXV_8.1_FULL.zip: BL - AP - CP - CSC
Final, turn ON "OEM Unlock" in "Developer options"
II. Flash TWRP and fix rom
Open Odin and select TWRP at AP > Start:*twrp_3.2.1_1_sm-j730gm_16318.tar
Download and copy zip rom to SD Card:*[email protected]@xdadevelopers.zip (1,1G)
Reboot your phone to Recovery (TWRP) > Wipe data > flash zip rom > pass
MOD EDIT: PPC LINKS REMOVED
Tried All Step by step but still not booting in recovery !
---------- Post added at 09:08 AM ---------- Previous post was at 08:56 AM ----------
for fake amoled screen?
EyuphanKundakci said:
for fake amoled screen?
Click to expand...
Click to collapse
Yes, Amoled Screen made in china
Please help me
Whenever I'm in Twrp recovery the unlock button does not slide to the end, it stops halfway.
So basically, the right-half of my screen does not work in twrp
have completed the final step but the sound is cracking and noisy. I think it's a software problem.
Akhtar Ali Jatt said:
Tried All Step by step but still not booting in recovery !
---------- Post added at 09:08 AM ---------- Previous post was at 08:56 AM ----------
Click to expand...
Click to collapse
bro flash combination file u5...just choose param.cm.nad_fw,nad_refer,recovery n cache,,,,phon will stuck on samsung logo,,,,,n then go download mood n flash twrp....its working..
kt.thegioiso said:
Yes, Amoled Screen made in china
Click to expand...
Click to collapse
Tnaks for support and this helpfull post
This is Another super **** from samsung in the roms 8.1,
even suspended the updates until correct this ****
updates for Brazil and South america no date scheduled
This proves that the j7 pro's led touch is not so exactly professional kkk
*************************//*************************
Due to the problems presented on the touch screen screens of the j7 pro I recommend everyone to be careful when upgrading their devices to android 8.1. Whoever is happy in android 7.1.1 is still happy. The differences of the operating systems are not so relevant to update. I recommend everyone who can wait a little longer due to the problems in the touch of china kkk. I am using a hybrid rom samsung 8.1 deodex. ** The news of Oreo include wifi speed test, emojs standardized, browsers will have more security mechanisms; Burger and beer emoji fixes It will be possible to see the battery level of devices that are connected via Bluetooth and that are connected to the smartphone; The novelties are not exactly many, but it is noteworthy I personally recommend caution, because samsung used an alligator eye screen on the device kkk
Thank you for this. I fixed 2 of my J7 Pro by following this guide!
Breguer said:
Thank you for this. I fixed 2 of my J7 Pro by following this guide!
Click to expand...
Click to collapse
using an original lcd or china lcd ?
is there any way to make work it with 8.0 oreo?
I was able to fix a J730G/DS.
---------- Post added at 10:21 PM ---------- Previous post was at 10:20 PM ----------
[/COLOR]
hacker812c said:
Tnaks for support and this helpfull post
This is Another super **** from samsung in the roms 8.1,
even suspended the updates until correct this ****
updates for Brazil and South america no date scheduled
This proves that the j7 pro's led touch is not so exactly professional kkk
*************************//*************************
Due to the problems presented on the touch screen screens of the j7 pro I recommend everyone to be careful when upgrading their devices to android 8.1. Whoever is happy in android 7.1.1 is still happy. The differences of the operating systems are not so relevant to update. I recommend everyone who can wait a little longer due to the problems in the touch of china kkk. I am using a hybrid rom samsung 8.1 deodex. ** The news of Oreo include wifi speed test, emojs standardized, browsers will have more security mechanisms; Burger and beer emoji fixes It will be possible to see the battery level of devices that are connected via Bluetooth and that are connected to the smartphone; The novelties are not exactly many, but it is noteworthy I personally recommend caution, because samsung used an alligator eye screen on the device kkk
Click to expand...
Click to collapse
I'm Brazilian but the forum only accepts conversations in English, so I ask you, is 4G on your cell phone working normal? I'm using that rom that is running the 7pro fix forums and I noticed that it is not connected in the 4G. users from other countries here in South America are complaining about this. What rom are you good at? if you can pass the link of the rom you use.
I fix touch with this guide but I don't have network
Imei status: NG
did I do something wrong?
micheldarkcore said:
---------- Post added at 10:21 PM ---------- Previous post was at 10:20 PM ----------
[/COLOR]
I'm Brazilian but the forum only accepts conversations in English, so I ask you, is 4G on your cell phone working normal? I'm using that rom that is running the 7pro fix forums and I noticed that it is not connected in the 4G. users from other countries here in South America are complaining about this. What rom are you good at? if you can pass the link of the rom you use.
Click to expand...
Click to collapse
I using R Remix 8.1 and
Official Oreo 8.1 with kernel Helios 2.5
Using too twrp and magisk
My 4G is perfect
---------- Post added at 06:33 PM ---------- Previous post was at 06:29 PM ----------
Gian182 said:
I fix touch with this guide but I don't have network
Imei status: NG
did I do something wrong?
Click to expand...
Click to collapse
I recomend kernel helios 2.5 to ROMs 8.1
Your problem probably is imei
Test the other ROM lineage
If network runs perfectly the problem is only Orei Official
If no the problem is imei
hacker812c said:
I using R Remix 8.1 and
Official Oreo 8.1 with kernel Helios 2.5
Using too twrp and magisk
My 4G is perfect
---------- Post added at 06:33 PM ---------- Previous post was at 06:29 PM ----------
I recomend kernel helios 2.5 to ROMs 8.1
Your problem probably is imei
Test the other ROM lineage
If network runs perfectly the problem is only Orei Official
If no the problem is imei
Click to expand...
Click to collapse
I think that is Imei cuz I installed the ROM FireHound and had the same problem.
Imei status: NG
Gian182 said:
I think that is Imei cuz I installed the ROM FireHound and had the same problem.
Imei status: NG
Click to expand...
Click to collapse
First option restore twrp backup of EFS ...
If dont have backup. but have your original IMEI no, try editing IMEI (search google how to)
Second option
had the same problem with my Note 5.
First, use TWRP backup, all partitions including efs & modem.
Open the root explorer app, open the efs folder, delet the files named nv_data.bin
, nv_data.bin.md5 & the folder called imei.
Then open twrp, wipe all partitions.
Flash the latest firmware with Odin.
Signal is back and "NG" is gone. Reply for me
Analyzing your problem i see possible database
Of EFS is corrupted test and reply
This method tested with others users
Thank you
Other option
https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-check-drk-imei-issues-t3379516
Yeah, but why this Win32:malware-gen thing?
I have fix a lot them, but 2 pieces after fix display is low light, but whem i flash oreo again work normal, the light off course, no touch.
Does it work even if I got my LCD screen replaced?
Hello
China Packages have limited active Bands and Aggregation is not active on Global Bands! This guide will help you to remove that limit and active global bands easily!
Because of new security patch, your device must be rooted to be able to activate Diag Port!
I have edited the needed file and all you need is below files, So download them and do the rest:
Files Required
1. IMEI Converter
https://www.mediafire.com/file/4qkiwnglhnejtmb/IMEI_Converter.exe/file
2. QPST Flash Tools
https://androiddatahost.com/w68st
3. Notepad++
And the Important File
https://www.mediafire.com/file/k5yccs1ih2islv8/EditedQCN.xqcn/file
Guide:
First thing First:
I'm Not Responsible for any Damage caused to your phone
Use QPST Flash tools and make a backup, So if any thing happened wrong you can restore it easily!
For start, the Diag Port must be on:
There are two ways to enable diagnostic mode after root which are as follows:
1. ADB
Enable "USB Debugging"on your phone.
Connect it to your PC/Laptop.
Open "Minimal ADB & Fastboot" Command Prompt with administrative rights.
Type adb devices and press enter.
Type adb shell and press enter.
Type su and press enter.
Type setprop sys.usb.config diag,adb and press enter.
2. Terminal Emulator App
Install any "Terminal Emulator" app from play store e.g. Termux
Enable "USB Debugging"on your phone.
Connect it to your PC/Laptop.
Open "Termux" .
Type su and press enter.
Type setprop sys.usb.config diag,adb and press enter.
If got success you must see the Diag Port in Device Manager like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So let's start,Connect phone to PC:
1- Open QPST and make a backup
Save the file for any further problem
Now use the IMEI Converter and convert your IMEI to HEX!
NOW:
Open Editedqcn file with Notepad++
1. Find the line zz zz zz zz zz zz zz zz zz
Replace them with the HEX number of your FIRST IMEI
2.Find the line xx xx xx xx xx xx xx xx xx
Replace them with the HEX number of your Second IMEI
3.Find your WIFI Mac address- Go to setting/My device/All specs/status
Find the lines(4 lines) zx zx zx zx zx zx
replace them with your WIFI MAC (the mac is already in HEX so, no need to change just find the exact)
4.Now save the file
Open QPST and thsi time choose restore tab, browse for qcn file that edited and restore it in your phone! Wait for 10 second and then unplug the phone!
Restart
And Boom
Now 4G+
After doing the whole procedure our device have permanent support to carrier aggregation? Flashing from global to China beta for example we have to flag this again?
Sent from my MI 9 using Tapatalk
AlexanderKgr said:
After doing the whole procedure our device have permanent support to carrier aggregation? Flashing from global to China beta for example we have to flag this again?
Click to expand...
Click to collapse
I don't think so...! Fastboot flash won't change files to original state!
i already have 4g+ on my phone without doing any of that...am i missin something?
No for sure
AlexanderKgr said:
After doing the whole procedure our device have permanent support to carrier aggregation? Flashing from global to China beta for example we have to flag this again?
Sent from my MI 9 using Tapatalk
Click to expand...
Click to collapse
No, NV files doesn't related to ROM!
bilal91 said:
i already have 4g+ on my phone without doing any of that...am i missin something?
Click to expand...
Click to collapse
This guide is for Chinese packages that don't aggregate bands in other countries !
One question:
This procedure unlock BAND 28 in chinese phones too?
Because I buy a chinese one (in a Xiami store in Shangai) and use it in Brazil. When I was in São Paulo I already saw 4G+. but I don´t know if it was using BAND 28.
Thanks
thanks for your work, I did everything as instructed and BOOM... no 4G+
SpeedoFST said:
thanks for your work, I did everything as instructed and BOOM... no 4G+
Click to expand...
Click to collapse
I believe that this is carrier dependent also, so if your carrier doesn't support aggregation, then no use about all this process!
Let's use my example, i have global version of this phone and all of this is natively supported and when i am within reach of my carrier station then i have 4G+ sign, but when is other way around then there is no 4G+ icon, no carrier aggregation!
If I put my sim card in my old Samsung s8 I have full range 4G+, on Mi9 full range 4G only. So I'm sure it's the Mi9's fault.
I am using xiaomi.eu and I get 4g+ on mine. I suppose I don't have to do this, right.
Can this support b20 on chinese device model?
SpeedoFST said:
If I put my sim card in my old Samsung s8 I have full range 4G+, on Mi9 full range 4G only. So I'm sure it's the Mi9's fault.
Click to expand...
Click to collapse
Excellent!
Then You know 100% that there is a "fault" on Mi 9 side but again, if You have Global-EEA Version and not Chinese then this is strange because all this bands should be already unlocked-enabled in Global-EEA version of this device.
Now it's cross my mind, what type of ROM is on Your device?!
Is it Global ROM or EEA ROM?!
I believe that I heave red on some forum that if You are in EEA region then it's better to flash this ROM on device because there is also some modem drivers discrepancy between Global and EEA version of the ROM (if You compare sizes of corresponding files in those two ROM's, You will see that they are different also).
Now, maybe I'm wrong but I also have this EEA ROM on my device and just as i have said, at me this carrier aggregation is working as it should.
SpeedoFST said:
thanks for your work, I did everything as instructed and BOOM... no 4G+
Click to expand...
Click to collapse
dude, at the first line of the thread i said that it is for china packages used in a country with aggregation support!
You are right, your carrier doesn't support aggregation!
head_djmusic said:
dude, at the first line of the thread i said that it is for china packages used in a country with aggregation support!
You are right, your carrier doesn't support aggregation!
Click to expand...
Click to collapse
U mean for Chinese version of mi9 right?
Enviado desde mi MI 9 mediante Tapatalk
Yes, The Chinese packages have limited bands!
head_djmusic said:
Yes, The Chinese packages have limited bands!
Click to expand...
Click to collapse
i cant see my phone in qpst , i cant continue, soime help please
head_djmusic said:
Yes, The Chinese packages have limited bands!
Click to expand...
Click to collapse
I was in the part of the back up but my device doesn't appear in the list, I'm using w10 pro, version 1903
Enviado desde mi MI 9 mediante Tapatalk
SpeedoFST said:
If I put my sim card in my old Samsung s8 I have full range 4G+, on Mi9 full range 4G only. So I'm sure it's the Mi9's fault.
Click to expand...
Click to collapse
Put your SIM card in the S8+, turn on mobile data and wait till you connect to 4G+, then open the dialer and dial *#0011#, press STACK1 if the SIM is in slot 1, and STACK2 if in slot 2.
You'll get to a ServiceMode screen, take a screenshot of that and post it here. The phone may be using bands that the Mi9 doesn't support.
partially works
I have a Mi 9 Chinese, 6/128. I did all the procedures correctly, and it shows that I have 4G + on the screen, but when I try to use some application / browser, there is no connection. Any suggestions what might be wrong?
Stock Pie for LG G6
Disclaimer:
• Only LG G6 H870 is supported
• Make Backups before use
• I'm not responsible for any damages that could occur!
Features:
Code:
[B]Made from official H87030a_00_OPEN_EU_OP_0829.kdz[/B]
- Removed RCTD (Root Checking Tool)
- Removed DM-Verity
- Removed ForceEncrypt
Requirements:
• Unlocked Bootloader
• OrangeFox or TWRP installed
• If you want root, latest Magisk
Installation:
1. Reboot to Recovery using Button Combo or Reboot App
2. Backup your phone if you need
3. Clean install (recommended): Full Wipe (System, Data, Cache & Dalvik-Cache) or Dirty Flash (without loosing data)
4. Flash H870_30a_OPEN_EU.zip
5. Flash Magisk.zip if you want
6. Reboot System & enjoy!
Downloads:
MEGA
or
Google Drive
or
MediaFire
About Rom:
Android Version: 9.0
Security Patch: 2019-05-01 !!!!!!
Build id: PKQ1.190522.001
Kernel Version: 3.18.120
Device: H870
For people without root: you need the flash the .kdz file via LGUP or use LG Bridge
kdz file: H87030a_00_OPEN_EU_OP_0829.kdz
Hi, I'm sorry for the question but, is it the same than the global?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enviado desde mi LG-H870 mediante Tapatalk
Is this any different from H870_V30a_TEST_EU ??
cheers
Matt
---------- Post added at 08:54 PM ---------- Previous post was at 08:52 PM ----------
I just checked the Build number on my phone...it's exactly same version i've had for weeks.
it's basically H870_V30a_TEST_EU
Matt
---------- Post added at 08:55 PM ---------- Previous post was at 08:54 PM ----------
marcksas said:
Hi, I'm sorry for the question but, is it the same than the global? View attachment 4836269
Enviado desde mi LG-H870 mediante Tapatalk
Click to expand...
Click to collapse
yes
Matt
matthew33 said:
Is this any different from H870_V30a_TEST_EU ??
cheers
Matt
Click to expand...
Click to collapse
Not really to be honest. The test version that got leaked is the exact same version as the one they released
Will you shear the kernel which is removed Forece Encrypt
At least I could give the credits to alin miron, who is the one who made the zip, it seems to me that you are a scoundrel, since you left standing up to been taking things from the telegram group and putting them in redit, xda ... as if they were yours At least give the credits to whoever does that, to change 2 lines in the installer is not to make a rom
kdz file
I couln't find a kdz version of this file. I'm trying to update my phone using LGUP and it doesn't allow me to use a zip file. Does anybody know where to find the kdz version?
stosick said:
I couln't find a kdz version of this file. I'm trying to update my phone using LGUP and it doesn't allow me to use a zip file. Does anybody know where to find the kdz version?
Click to expand...
Click to collapse
here https://forum.xda-developers.com/lg-g6/how-to/lg-g6-pie-update-available-lgbridge-eu-t3972111
Might be a silly question, but I'm inexperienced.
After wiping (to unlock the bootloader) and installing this modified stock rom, will LG's backup solution via lg bridge still work?
It seems like currently it is the best solution in order to retain app data, settings and media after going through the procedure.
Thanks in advance.
Call Recoreder Button
HI, I tried to replace LGInCallUI.apk from v30 with active call record button in this ROM for H870 and seems working
File location is system\product\priv-app\LGInCallUI
I used solid explorer, obviously smartphone rooted... I replace only apk
https://forum.xda-developers.com/lg-v30/themes/volume-button-answer-mod-call-ui-oreo-t3951967
first post, attached files, Pie_V30_Mod_v30b_iyurtlu.zip
thank you iyurtlu!
bye
Bye
Rifum said:
Not really to be honest. The test version that got leaked is the exact same version as the one they released
Click to expand...
Click to collapse
Well that's just UNTRUE. This New version is very different to the Leaked Beta version.
Much of the UI has been updated. The phone is less laggy. This is a much better version. AND IT IS NOT the same version!
Who can extract kernel and share to me, thank you
@Rifum RCTD (Root Checking Tool) Is enabled please fix it.
alchemist83 said:
Well that's just UNTRUE. This New version is very different to the Leaked Beta version.
Much of the UI has been updated. The phone is less laggy. This is a much better version. AND IT IS NOT the same version!
Click to expand...
Click to collapse
It's erxactly the same.
Matt
I am having a weird issue. Whenever I enable Wifi hotspot, people connect with me successfully but it shows 0 users connected and on other devices it says No internet connection and then my G6 get freeze and restart itself. What could be the reason? I cleaned install this rom from scratch. It was perfectly fine in Oreo.
Edit: force restart fixed the issue.
New Versions of 30a (root check fixed)
Downloads:
MEGA
or
Google Drive
or
MediaFire
alchemist83 said:
Well that's just UNTRUE. This New version is very different to the Leaked Beta version.
Much of the UI has been updated. The phone is less laggy. This is a much better version. AND IT IS NOT the same version!
Click to expand...
Click to collapse
I also tend to disagree. I use the leaked "beta", without any issues at all. I compared all parameters of both, and there is no difference. They released that one.
Rifum said:
New Versions of 30a
Downloads:
MEGA
or
Google Drive
or
MediaFire
Click to expand...
Click to collapse
What's new?
---------- Post added at 09:43 PM ---------- Previous post was at 09:32 PM ----------
Rifum said:
New Versions of 30a
Downloads:
MEGA
or
Google Drive
or
MediaFire
Click to expand...
Click to collapse
NEW?
I've checked and it's EXACTLY the same size as the version that's been out for weeks: H870_V30a_TEST_EU
Geez, I'm glad I've just bought a V30.
Matt
matthew33 said:
What's new?
---------- Post added at 09:43 PM ---------- Previous post was at 09:32 PM ----------
NEW?
I've checked and it's EXACTLY the same size as the version that's been out for weeks: H870_V30a_TEST_EU
Matt
Click to expand...
Click to collapse
root check is now fixed and it's based on the released kdz file instead of the up file like in the test version. but you are right there is basically no difference