Requeriments:
Locked bootloader (Unlocked bootloader can flash a custom kernel with this included).
You must be root, if you not be root do this --> http://forum.xda-developers.com/showthread.php?t=2783885 NEW
You need enable USB Debuging Options (go settings->about phone->compilation number and hit seven times, then go settings->developer options and Enable USB debugging..
Installation:
1.) down CWM_SP_#.#.#.zip file.
2.) unzip it on your desktop.
3.) go to the CWM_SP_#.#.# folder
4.) run the install.bat file in windows (use others for linux or mac)
5.) select option number 1 to install.
6.) stay tuned on the phone as it calls super user permissions.
7.) Read the directions to see that everything went well.
8.) If all went well you press a key to continue and after press 3 for reboot phone or 4 to finish.
Click to expand...
Click to collapse
If something goes wrong, reboot your computer and phone and try again.
For new installs in recovery, i add the flashable zip in downloads section.
Operation:
Turning on the phone will see four lights advancing (GREEN-WHITE-RED/BLUE) when the blue light show press:
Volume up -> Philz
Volume Down -> TWRP
Camera button -> CWM Touch
Click to expand...
Click to collapse
If you have a problem you can put your questions once they have exhausted all options and read the comments of others.
In CWM Touch the backups are stored in /data/media/clockworkmod or /storage/removable/sdcard1/clockworkmod
If you only need ClockworkMod (without philz and TWRP ) you can use a MOD made by @Dark Passenger (any doubt about this release or updates, please ask him), just go to this post <<---- clic here (credits for MOD to @Dark Passenger)
Bugs:
For now, restoring backups in 4.3 with CWM touch have troubles. Fixed!
The date in recoverys are wrong, please rename the backups. Fixed!
Click to expand...
Click to collapse
Changes:
2014.07.09 ver. 4.4.1
- Improvements in product number and version number detection.
2014.07.04 ver. 4.4
- added support to CM 11 KitKat by bagyusz.
- all version are supported (4.1, 4.3 ) in same installer.
2014.06.27 ver. 4.3.8
- added sd-ext suport to backup
second partition of sdcard to all
recoverys(if exists). Needed if you
use link2sd or similar.
- CWM is default recovery (when you
do "reboot in recovery" system enter
in CWM automatically. The buttons keep
same function.
2014.06.16 ver. 4.3.7
- added linux and mac installers
- fix autocreate init.d directory
if not exist.
2014.06.09 ver. 4.3.6
- reverted enhanced ramdisk.
- fixed some bugs.
2014.05.21 ver. 4.3.5
- Updated CWM Touch to 6.0.4.7
- Updated TWRP to 2.7.0.0
- Added enhanced ramdisk.
- Added init.d support.
- Added compression to ramdisk's.
- Fixed "reboot in recovery" feature.
2014.05.16 ver. 4.3.4
- Loaded stock exfat driver.
- Added improvements.
- Fixed wipedata permissions.
2014.05.15 ver. 4.3.3
- Philz updated to 6.41.6.
- Disabled Glove mode in TWRP.
- Fixed DateTime in recoverys.
- Changed script to wipedata.
- some bugs fixed.
- support only for 4.3 Roms. (Sorry )
2014.04.04 ver. 4.3.2
- philz updated to 6.25.0.0
- CWM Touch updated.
- some bugs fixed.
2014.03.18 ver. 4.3.1
- added ZIP recovery flashable.
2014.03.11 ver. 4.3.0
- added Philz touch (thanks to @Phil3759).
- Some fixes to TWRP
2014.02.17 initial version
- added external sdcard for backup / install
- Fixed problems mounting/unmounting system partition
Click to expand...
Click to collapse
Credits:
@Phil3759 for PhilZ touch.
@FXP for CWM
@teamwin for TWRP
@DooMLoRD for ramdisk´s and scripts
@bagyusz for hijack ramdisk.
@KeiranFTW for hijack ramdisk.
Cheers and enjoy :good:
Download:
Installer:
CWM_SP_4.4.1.zip - 11.81 MB NEW!
Flashable:
recoveries_SP_4.4.1_signed.zip - 10.62 MB NEW!
Click to expand...
Click to collapse
anyone tried this already?
Im gonna try right now... Risking flashing on a Sunday... God protect me
Works.... Tested CWM Touch.
Nice Job Man, now we dont have to reflash 4.1.2 and root and flash 4.3 again n again n again n again
Life saver.
---------- Post added at 10:53 AM ---------- Previous post was at 10:25 AM ----------
Tested All recoveries:
1. CWM works fine
2. TWRP fine
3. CWM-touch (some difficulty in navigation, but works ok)
is there any way .. with out installing purerome.. .for rooting ?
i dont wanna change my stock rom....
I tested it, but only TWRP make backup. CWM says "can't mount system". CWM touch says "backup completed", but there is no backup files on any of storages.I tested two others CWM mods and they also says "can't mount system".
Ohh, I found CWM Touch backup files. After I read log file, I saw this row -> "I:using /data/media for /sdcard/0/clockworkmod". Backup folder is in /data/media/clockworkmod/backup/..
There is something wrong with filesystem table. I saw several lines that say Unable to get recovery.fstab info for: /datadata, /emmc, /sdcard, /ed-ext and /external_sd.
yep. this works. haven't tried backing up yet though. thanks.
thanks, its work.... but, why i cant mount system, its always "mount system Eror"....????
can any body help...
Can cwm mount sdcard0/1 and system?
Sent from my C5303 using xda premium
CWM shows "error in mounting system" when I try to mount system. As a result, can't take nandroid backup.
CWM Touch shows "error in unmounting system" when I try to unmount system. Though it can take backup, when I try restore, it shows error in unmounting system.
TWRP though not showing error, and seeming to backup correctly, when I try restore, it shows error in unmounting system.
In other words,
not working for me.
I'm on CE 4.3 stock, rooted, LB.
Deepam7325 said:
CWM shows "error in mounting system" when I try to mount system. As a result, can't take nandroid backup.
CWM Touch shows "error in unmounting system" when I try to unmount system. Though it can take backup, when I try restore, it shows error in unmounting system.
TWRP though not showing error, and seeming to backup correctly, when I try restore, it shows error in unmounting system.
In other words,
not working for me.
Click to expand...
Click to collapse
Same for me, i use existenz v2
Sent from my C5303 using xda premium
kuriboo said:
Same for me, i use existenz v2
Sent from my C5303 using xda premium
Click to expand...
Click to collapse
For 4.1.2 backups use CWM or TWRP, for 4.3 backups use CWM Touch.
Remember, if you restore an 4.1.2 backup you need change kernel to 4.1.2.
Enviado desde mi C5303 mediante Tapatalk
dssmex said:
For 4.1.2 backups use CWM or TWRP, for 4.3 backups use CWM Touch.
Remember, if you restore an 4.1.2 backup you need change kernel to 4.1.2.
Enviado desde mi C5303 mediante Tapatalk
Click to expand...
Click to collapse
I tried to restore 4.3 backup in cwm touch & twrp. it showed error "unable to unmount system" after md5 verification.
I tried to restore 4.3 backup in cwm. It verified md5 and erased boot image. after that it showed error "error, can't mount system" . As a result, I got soft brick on booting.
Its as if, CWM has its "mount system" freezed. CWM & TWRP have their "unmount system" freezed
Same for me, can't mount /system, so it's basicaly unusable ;/
Deepam7325 said:
I tried to restore 4.3 backup in cwm touch & twrp. it showed error "unable to unmount system" after md5 verification.
I tried to restore 4.3 backup in cwm. It verified md5 and erased boot image. after that it showed error "error, can't mount system" . As a result, I got soft brick on booting.
Its as if, CWM has its "mount system" freezed. CWM & TWRP have their "unmount system" freezed
Click to expand...
Click to collapse
in cwm touch you need mount system and data first, if you have trouble try use advanced restore.
i test full backup and all are ok,
---update --
Restoring backup in 4.3 don´t work, i´m working for fix that.
dssmex said:
in cwm touch you need mount system and data first, if you have trouble try use advanced restore.
i test full backup and all are ok,
---update --
Restoring backup in 4.3 don´t work, i´m working for fix that.
Click to expand...
Click to collapse
Pray for that
I decide UBL again after Relock
Sent from my C5303 using xda premium
flashed the rom n its working great but now if i want to enter cwm m nt able to plz help
saurabh808 said:
flashed the rom n its working great but now if i want to enter cwm m nt able to plz help
Click to expand...
Click to collapse
once you flash the custom rom yo need flash root too, once reboot need install CWM again because the recovery image are in system partition.
@ OP
Suppose i am on a 4.3 ROM, and i want to flash a MOD or add-on, which recovery will be compatible with 4.3?
I am on LB, so if the recovery formats system, i have a very long process to get back to where i was.
Currently no compatible custom recovery for LB, but there are people working on it!
We all wait!
Mi3 has a dual boot,it is useless on any other rom then miui and eats space
This is how to merge sys1 and sys2 without adb shell or without connecting to a PC
backup system partition as it will format(excluded sdcard)
1.download the zip file below
2.backup with cwm/twrp
3.flash it (tested on cwm/twrp)
4.advanced restore system partition from nandriod backup
5.flash full gapps modular or stock package gapps
You are done
Note:flashing stock gapps will replace your stock apps and will break ota
Credits:
PAgapps :http://forum.xda-developers.com/par...apps-official-to-date-pa-google-apps-t2943900
audahadi for zip : http://forum.xda-developers.com/showpost.php?p=58591075&postcount=29
Can i flash on twrp recovery?
enterome said:
Can i flash on twrp recovery?
Click to expand...
Click to collapse
Yes works fine with twrp/cwm
smh.saad said:
Mi3 has a dual boot,it is useless on any other rom then miui and eats space
This is how to merge sys1 and sys2 without adb shell or without connecting to a PC
backup system partition as it will format(excluded sdcard)
1.download the zip file below
2.backup with cwm/twrp
3.flash it (tested on cwm/twrp)
4.advanced restore system partition from nandriod backup
5.flash full gapps modular or stock package gapps
You are done
Note:flashing stock gapps will replace your stock apps and will break ota
Credits:
PAgapps :http://forum.xda-developers.com/par...apps-official-to-date-pa-google-apps-t2943900
audahadi for zip : http://forum.xda-developers.com/showpost.php?p=58591075&postcount=29
Click to expand...
Click to collapse
I don't see the point of this thread. It is right next to the original thread on extending partitions in Mi3 General section.
Please carry on your discussion in the thread that already exists and refrain from creating duplicate topics.
Thread closed.
This is a copy from my AT&T Desire 610
-Everyting its stock
-Just delete almost all AT&T
In order to flash it to your device you need be:
-Bootloader Unlocked
-Root
-TWRP 3.0.0
-Nandroid Backup from your own rom (i'm not responsive fro damages, etc, etc, etc)
Unzip and copy folder Htc_Desire_610_stock_att_debloated_TWRP3.0.0_backup to
TWRP/BACKUPS/HTxxxxxxxxxx/
*HTxxxxxxxxxx folder its generate acording your devide.
-Reboot in recovery mode (TWRP 3.0.0)
-Make wipes (also you can clean data & storage for a very vlean installation)
-Restore from folder Htc_Desire_610_stock_att_debloated_TWRP3.0.0_backup
-Reboot system
Boot in the welcome screen takes less than 5 mins (Be pacient)
Enjoy!!!
Htc_Desire_610_stock_att_debloated_TWRP3.0.0_backup
drive.google.com/open?id=0B04Tc99leOMiZ0lPTkxOQVNDX2c
Does it have to be 3.0.0? If so, how do I update. Through TWRP manager?
Nevermind got it updated
Also is this stock ROM rooted?
Thx the ROM is rooted, and no fc with be useful! Thanks again
Having a long boot time? Have you experienced this?
THANK YOU!!! Been trying to fix my phone for months! lol.
Awesome job. I just flashed it with no problems.
the nandriod backup des it need to be of stock rom? noob here
First of all search
Repartition_MI_Pad_1_2GB_zardMi3.Zip
And download it
And then download
CWM RECOVERY 6.0
OR OTHER VERSION you want
Of CWM
And install cwm by just going into
Update software of xiaomi pad
And on upright corner click on icon
And then select install zip
Select CWM RECOVERYzip and afterword reboot it and it will again open as usual
Now power off it
Now press volume up and power button simultaneously
Wait for few seconds it will open CWM RECOVERY. And then go to system 1 and backup your current ROM (I insist not necessary) and then Wipe data ,cache,system
,Dalvik cache,
After wiping system 1 go to system 2 again wipe
System cache, data , system and then go back to system 1 and select install zip and select Repartition_MI_Pad_1_2GB_zardMi3.zip
And afterword again select install.zip
And then select linage os 13.zip placed in your sd card
And flash it up
After finishing it install gapps and
Hurry it's all done okey
But these all should be done through system 1 only and it should be active shown
Thank you
For those on whom TWRP didn't worked okey
As I have used both but TWRP DIDNOT WORKED FOR ME
NO BLAME CAN BE PUT ON ME IF SOMETHING WENT WRONG ON YOUR XIAOMI PAD OK
THANKS AGAIN
screenshots???
could you please post some screenshots and also how is the optimization and battery backup
https://drive.google.com/file/d/0B4OsY76G4YCIVzBOc1FtX250MnM/view?usp=drivesdk
https://drive.google.com/folderview?id=0B4OsY76G4YCIUEQ0aEdra204Z1E
Thanks for the tip
I have a SGP321 (Pollux LTE | Xperia Tablet Z) on unofficial LineageOS 14.1; the TWRP is the one built into the boot.img (v. 3.1.1).
I'd like to get to 16.0.
1.) Can I go from 14.1 to 16.0, or is there a reason 15.1 should be flashed first?
2.) Will any version ≥ TWRP 3.2.x.x official or unofficial work for both Oreo and Pie?
3.) Is this a correct order of operations:
a.) Boot into FOTA recovery
b.) Advanced Wipe: Dalvik + System + Cache + Data + Internal Storage (also, is there a difference between Format Data and Advanced Wipe > Internal Storage?)
c.) Install .zip for LoS from external SD card (or should I sideload via adb?)
4.) Installing gapps is listed as optional, so I can skip installing an opengapps .zip?
5.) Installing addonsu .zip can be done later?
Thank you!
remi_kamahl said:
I have a SGP321 (Pollux LTE | Xperia Tablet Z) on unofficial LineageOS 14.1; the TWRP is the one built into the boot.img (v. 3.1.1).
I'd like to get to 16.0.
Click to expand...
Click to collapse
Hello!
1. Yes, you can.
2. For Oreo and Pie 3.2.x.x and 3.3.x.x are optimal.
3a. Check FOTA recovery version, if <3.2.x.x i suggest updating first.
3b. The difference is, that formatting data doesn't wipe internal storage (as far as i remember).
3c. External SD is better (though it's your choice).
4. If you don't GAPPS you can skip it.
5. Yes it can be done later, but i see no reason to not installing it in 3c.
Also think of root management solution, suitable best for you. Will it be internal root manager of LOS (with the help of addonsu binary) or you will use Magisk, which is more complex and has it's benefits too.
Good luck with flashing!
Thank you for the info!
I'm getting dropped into TWRP after flashing the latest 16.0 .zip.
This is specifically what I did:
1. Pushed lineage-16.0-20200511-UNOFFICIAL-pollux.zip & twrp-3.3.1-0-pollux.img to external_sd via adb root
2. adb reboot recovery; verified md5sums via terminal
3. In terminal: # dd if=/external_sd/twrp-3.3.1-0-pollux.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
4. Reboot into FOTA recovery; made sure the version = 3.3.1-0
5. Wipe: Format Data
6. Advanced Wipe: Dalvik + System + Cache + Data + Internal Storage
7. Install the lineage .zip
8. Wipe Cache/Dalvik and reboot system
After the "Sony Xperia" logo pops up, the Lineage boot animation runs for about 2.5 minutes, then the tablet drops into TWRP (RescueParty).
I can restore a 14.1 backup I made before flashing, and the tablet will boot again successfully.
Not sure where to go from here/not sure which specific log file would be necessary—or even available—to diagnose the problem (dmesg, logcat, Console-ramoops).
remi_kamahl said:
Thank you for the info!
I'm getting dropped into TWRP after flashing the latest 16.0 .zip.
Click to expand...
Click to collapse
This happens sometimes. Try to wipe everything ones again and flash LOS via TWRP.
FYI lineage-16.0-20200609-UNOFFICIAL-pollux.zip build is available.