Re-Opening Thread, this guide can be used for any new Samsung phone, not only Note 7...
Welcome everyone,
I hope you all are good, well maybe not if you're here because of your phone got bricked...
So many people seems eager to Root their new Samsung Device (including Me) and My Phone got bricked...
To All who have Bricked their Phones...
Here is How I fixed it... (I have only tried SmartSwitch, other methods are provided if you know how to use them and please do this at your own risk) :fingers-crossed:
***SamFirm Method - Deprecated
1. Go to Updato Samsung Firmwares... and search for your device ex:SM-P585 ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Click on the desired firmware & write down the PDA, CSC, Phone and Product Code...
3. Download SamFirm from SamFirm...
4. Open Samfirm Enter device model, select manual & input the PDA, CSC, Phone and Product Code...
5. Click Download...
6. Open Odin and select AP and select the downloaded software image...
7. Enter Download Mode on your device...
8. Flash the Software Image...
Hopefully it would work... I'll Post screenshots Soon...
***Updato Method - UPDATE - It's the Best Way - Recommended - Sammobile Alternative
1. Go to Updato Samsung Firmwares... and search for your device ex:SM-N930 ...
2. Select & Download the software image...
3. Open Odin and select AP and select the downloaded software image...
4. Enter Download Mode on your device...
5. Flash the Software Image...
Hopefully it would work... I'll Post screenshots Soon...
***Sammobile Method - Not Recommended - Very slow Connection - Image Corruption chance High
1. Go to Sammobile Firmware... and search for your device ex: SM-N935 ...
2. Download the software image...
3. Open Odin and select AP and select the downloaded software image...
4. Enter Download Mode on your device...
5. Flash the Software Image...
Hopefully it would work... I'll Post screenshots Soon...
***SmartSwitch Method - No Longer Works
1. Go to Samsung Smart-Switch Here...
2. Download smart switch, open it and hit emergency recovery, then device initialization, enter "SM-XXXX" or whatever is after S_-____ and hit search...
In my case I put SM-N930FD, that's my Phone - Enter all CAPS ON...
3. Enter S/N on the back of the phone... Smart switch will try to fetch the ROM if available...
4. It will tell you that everything will be deleted and sign-out from google accounts... but you can't do anything so just proceed...
5. Then it will ask you to enter to the Download Mode or Odin Mode ( Vol Down + Home + Power ), continue ( Vol Up ) and connect your phone via USB to the PC...
6. Smart switch will start downloading the Image to Wipe the phone and reinstall the ROM again...
Unfortunately, I don't have a screenshot of this as I already have done all these steps... but it's nothing but a small window showing progress of download and install...
7. Leave the phone, Don't play with your PC... You can Pray or go do something good so that when you're back, the phone would be fresh as if you just bought it...
Unfortunately, I don't have a screenshot of this as I already have done all these steps... but it's nothing but a small window showing Device initialization complete, Hit OK and you're done...
It will take time but Hopefully, it fixes your phone as it did to mine...
Updates:
Update 16th Feb 2018:
SmartSwitch Method no longer works, Samsung has removed it...
Update 25th July 2017:
This is not related to Galaxy Note 7 anymore, it's a solution to any Samsung Phone...
Update 2nd October 2016:
User azzicles reported that in Odin you need to check update bootloader to succeed...
Great work putting this up together, But Should've posted in the guides section as this more of a guide rather than a Development thread.
JazonX said:
Great work putting this up together, But Should've posted in the guides section as this more of a guide rather than a Development thread.
Click to expand...
Click to collapse
Thank you,
I am still new to XDA and I wished to help those who bricked their phone...
When I bricked my phone, I was so sad that I'd have to wait for loooong time till I am able to fix it....
So I have done a bit of research if it's possible to do it through Samsung SmartSwitch,
after all when you boot your bricked phone it tells you use smartswitch or contact service center...
when I fixed my phone, I felt relieved and Wished to share my discovery to make those who bricked their phone relieved as well...
So I put the thread here...
If the admins see that the thread should be put in the Guides Section, then hopefully they'd tell me how to move it there...
Thank you for taking to time to post the solution.
Will this work with T-Mobile version? When I enter my S/N in SmartSwitch, it keeps erroring out when I click "search" and then SmartSwitch immediately closes... Any help, much appreciated!
Ker~Man said:
Will this work with T-Mobile version? When I enter my S/N in SmartSwitch, it keeps erroring out when I click "search" and then SmartSwitch immediately closes... Any help, much appreciated!
Click to expand...
Click to collapse
SmartSwitch Works with All Samsung Note 7 Phones and it's the safest tool to unbrick your phone...
The thing I noticed about SmartSwitch is it's case sensitive and the S/N at the back of your phone is tricky to the eye as it's small and light reflected easily could make you input it wrongly...
Revise what you Entered, better write it on the paper and count the characters...
The only error it would display is something like "Your phone is not supported yet" or "phone software not available" if your input is correct...
As I understand, you are stuck at step 3...
Please let me know if you still have issues, I'll do my best to help you...
Does it fix your missing recovery?
And no offence, please do not use so much color fonts in the post. It makes your article so difficult to read. Some of the colored sentences are even not import.
Using just bold, underlying, red , will be ok.
knifekid said:
Does it fix your missing recovery?
And no offence, please do not use so much color fonts in the post. It makes your article so difficult to read. Some of the colored sentences are even not import.
Using just bold, underlying, red , will be ok.
Click to expand...
Click to collapse
None taken, The reason I use colors is to highlight the important words in my post or reply... :angel:
Anyway, It will wipe your phone clean and re-install the phone software ( Recovery + ROM + Partitions.... Anything that got corrupted but not Odin or download mode)
So yes it will fix the missing recovery & The Phone will be as if you have just bought it... :good:
where did you buy your 930FD from?
Chord_Hugo87 said:
where did you buy your 930FD from?
Click to expand...
Click to collapse
Ordered from UAE - Dubai...
Dante63 said:
Ordered from UAE - Dubai...
Click to expand...
Click to collapse
which site? most site dont ship till the 26th
Chord_Hugo87 said:
which site? most site dont ship till the 26th
Click to expand...
Click to collapse
Actually, a friend was going to UAE...
great job this will help a lot of rooters much appreciated
Nothing works
I tried several times with several computers and still wont worki think i can never get passed the logo to be honest it lets me go in dowmload mode but cant flash anything anymore no recovery im not sure what do to with my phone now
Will this restore the phone to its very first firmware or the latest firmware?
busventinc said:
great job this will help a lot of rooters much appreciated
Click to expand...
Click to collapse
Thank you...
xstatik said:
I tried several times with several computers and still wont worki think i can never get passed the logo to be honest it lets me go in dowmload mode but cant flash anything anymore no recovery im not sure what do to with my phone now
Click to expand...
Click to collapse
Which step are you stuck at?
EarlZ said:
Will this restore the phone to its very first firmware or the latest firmware?
Click to expand...
Click to collapse
The latest firmware... But without patch updates... You'll have to update it yourself... Just 200MB...
Sent from my SM-N930FD using XDA-Developers mobile app
So its the firmware thst originally came with the device? There is an update for August so which will it install?
EarlZ said:
So its the firmware thst originally came with the device? There is an update for August so which will it install?
Click to expand...
Click to collapse
when you input the S/N, it locates the phone region, it searches for the latest firmware and installs it... Not the exact firmware that originally came with the device,
if say 6.X.X update rolled out then smartswitch will install that instead of the 6.0.1...
Patch Updates are done through the phone, they don't change firmware version...
same
hi, ty for efforts, appreciated,, i input serial number, hit enter n switch just closes after about 5 seconds,,,,,ps correct sn, used magnify from other phone and took photo lol, i got old eyes
David McCulloch said:
hi, ty for efforts, appreciated,, i input serial number, hit enter n switch just closes after about 5 seconds,,,,,ps correct sn, used magnify from other phone and took photo lol, i got old eyes
Click to expand...
Click to collapse
You're welcome...
If you're sure of S/N... Are you sure of the Model...? Remember I said case sensitive, meaning Uppercase... Else Reinstall SmartSwitch or Try another PC...
Sent from my SM-N930FD using XDA-Developers mobile app
Related
UPDATED. This will put you to STOCK 2.2! Using ODIN thanks to eugene373.
If you want stock and are able to get in to recovery and want a flashable rom. click here
This started as a thread asking for help, with the little help I got... and a little searching NOW this thread is to help other people who are having the same problem
ALSO its to show that a little searching on this forum, you will pry find the answers you are looking for.
EVERYTHING in here I found in the Bible, that is located in the development section.
This guide is for non hardware locked vibrants... if you are hardware locked check out this threadhere
First off you will need to get odin and the correct files.
I have packaged eugenes 2.2 pit and tar(md5) files in a zip along with odin. these are all the files you will need and you can download them here
(remember this is for unofficial 2.2 if you want Official 2.1 files click here )
s15274n (thread here) has everything you will need in his [Tips & Tricks] thread AND MORE!
so make sure to check that out and read the "EASY WAY TO GET THE JI6 UPDATE" before you go any further with my thread.
Georgegreco86(thread here) made this awesome image (below) and it works perfectly....
HOWEVER some times there are some complications that happen that i cover below.
TO GET IN TO DOWNLOAD MODE
I have found the EASIEST WAY to do this is:
1.pull the battery out of the phone.
2.plug usb into computer
3.put the battery back in the phone
4.hold in the volume up and down
5.plug usb in to phone
it should bring you to the download mode in seconds.
now you should unplug the usb From the phone..
make sure the battery stays in, and open odin.
now follow the instructions below.
1. Open Odin3_v1.0
2. Load .512 into the PIT placeholder
(In this case s1_odin_20100512)
3. Load *FILE.tar* into PDA placeholder
(In this case Eugene_2E_JK2_Froyo.tar.md5)
4. Make sure COM port has a number in it
This means your phone is connected, if your phone is not connected make sure you have the correct drivers)
5. Press Start!
6. If you it all works your done... if not keep reading!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IF YOU RUN IN TO PROBLEMS!
If your phone is not connecting to odin.It might be because you need the correct drivers, thanks to TGA_Gunnman they are located here http://forum.xda-developers.com/showthread.php?t=728929.
I was able to just let the computer search for them and with a few clicks, had the drivers installed.
To install the Android USB driver on Windows Vista for the first time:
1. Connect your Android-powered device to your computer's USB port. Windows will detect the device and launch the Found New Hardware wizard.
2. Select "Locate and install driver software."
3. Click "Next." Vista may prompt you to confirm the privilege elevation required for driver installation. Confirm it.
Freezing on "cache.rfs"
searching on google i found a website called fractionalphones.com, the post was about this and it said what i had to do was reboot my computer and hit F8 (just keep touching it) and when it gets to the "safemode screen" arrow down to "Disable Digital Signature Verification"
Also a problem Some people had was the usb port used...
So if it does not work try a new port!
Use oclf. Remove the lag fix first, then ant other optimizations you may have clicked, then ext 2 and finally root. I had to do this to send back my phone. Now the ext2 takes awhile so be patient.
Sent from my SGH-T959 using XDA App
ipeench said:
So if I have rooted the phone and have installed the OCLF from the market. But I wasn't the phone back as if I just took it ot the box.. What's the best way to do that.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
The easiest and cleanest way to do it is to Odin the phone back to stock.
Odin Visual Guide
Stock Firmware
tjhart85 said:
The easiest and cleanest way to do it is to Odin the phone back to stock.
Click to expand...
Click to collapse
Sweet, you even put in links to reading material! In a day of being flamed for asking questions like this..words can not express the kindness you have shown, thank you.
Sent from my SGH-T959 using XDA App
creglenn said:
Use oclf. Remove the lag fix first, then ant other optimizations you may have clicked, then ext 2 and finally root. I had to do this to send back my phone. Now the ext2 takes awhile so be patient.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
It wont let me remove the lag fix, v2 says i dont have the lag fix installed
and v1 says "you only have 346MB free on RFS, but 364MB used on EXT2. You must free up some space"
and then it tells me i dont have enough to install either v1 or v2 of the lag fix
BUT my quadrant is 2000+ so i know its installed.
i saw the other tread about this but it didnt really tell me much.
ipeench said:
It wont let me remove the lag fix, v2 says i dont have the lag fix installed
and v1 says "you only have 346MB free on RFS, but 364MB used on EXT2. You must free up some space"
and then it tells me i dont have enough to install either v1 or v2 of the lag fix
BUT my quadrant is 2000+ so i know its installed.
i saw the other tread about this but it didnt really tell me much.
Click to expand...
Click to collapse
LOL, One of the reasons I suggested Odin. It'll "just work" even if you have the lagfix (at least it did for me). Make sure you backup everything on the SD card that you want & tell it to repartition. If all goes well, everything down to the internal SD card has been put back to stock.
I know when I did the lagfix, I had a PC app that just ran ADB commands in a batch file (basically). After a week or so it got unbearably slow and even the remove lag fix that came with it wouldn't work, so I used Odin to go back to stock.
--------
But, I think what it's complaining about is you need to free up ~20MB of space in order to remove the lag fix. Since it needs to move the files that it put on the ext2 partition back to the RFS partition, it needs at least that much space before it can move the files & then delete the ext2 partition.
bumping because I figured out what I was doing and I think this can help a lot of other people.
I'm trying to do the "Odin back to stock" process but I'm having a little trouble. I've got all the files and opened Odin etc. I entered the .pit file and the .tar file. Auto-reboot and f. reset time are checked. I click start and I get "<OSM> All threads completed. (succeed 0 / failed 0)"
What am I doing wrong?
trunkstar1 said:
I'm trying to do the "Odin back to stock" process but I'm having a little trouble. I've got all the files and opened Odin etc. I entered the .pit file and the .tar file. Auto-reboot and f. reset time are checked. I click start and I get " All threads completed. (succeed 0 / failed 0)"
What am I doing wrong?
Click to expand...
Click to collapse
Odin isn't recognizing your phone. You should double check that the drivers are properly installed. Then, make sure Odin is on and click Reset if need be. Put phone into Download Mode and then plug it into computer.. A yellow box should appear at top of Odin, which let's you know you're successfully connected.
Hope that helps!
.:|Sent from my Super AWESOME Vibrant using XDA App|:.
That did help, thanks. And, with some help from other XDA forumers I got the right drivers installed and I'm in motion now. Thanks again.
trunkstar1 said:
That did help, thanks. And, with some help from other XDA forumers I got the right drivers installed and I'm in motion now. Thanks again.
Click to expand...
Click to collapse
With all that i have taken from this forum..I'm glad i can finally give back!
ipeench said:
This started as a thread asking for help, I got a little help(thank you for pointing me in the right direction tjhart85)
NOW this thread is to help other people who are having the same problem
ALSO to show that a little searching on this forum, you will pry find the answers you are looking for.
pretty much everything in here i found in the Bible, that is located in the development section.
This is for non hardware locked vibrants... i dunno what to tell you if yours is hardware locked because honestly i have no clue what that even means :-/ I'm just as new to this as you are!
First off you will need to get odin and the correct files.
and rhcp0112345(thread here) found the "true stock 2.1 firmware for vibrant" and all the files you will need,including odin are bundled in a nice little zip file for you.
http://tinyurl.com/2bc5b6r
Georgegreco86(thread here) made this awesome image (below) and it works perfectly.... but some times there are some complications that happen that i cover below.
TO GET IN TO DOWNLOAD MODE
I have found the EASIEST WAY to do this (IMO) is
1.pull the battery out of the phone.
2.plug usb into computer
3.put the battery back in the phone
4.hold in the volume up and down
5.plug usb in to phone
it should bring you to the download mode in seconds.
now you should unplug the usb.. make sure the battery stays in, and open odin.
now follow georgegrecos instructions.
Some people have said to load the files (PIT and TAR) before reconnecting the phone to the computer so that is how I did it and it worked perfect.
IF YOU RUN IN TO PROBLEMS!
If your phone is not connecting to odin.It might be because you need the correct drivers, thanks to TGA_Gunnman they are located here http://forum.xda-developers.com/showthread.php?t=728929.
I was able to just let the computer search for them and with a few clicks, had the drivers installed.
To install the Android USB driver on Windows Vista for the first time:
1. Connect your Android-powered device to your computer's USB port. Windows will detect the device and launch the Found New Hardware wizard.
2. Select "Locate and install driver software."
3. Click "Next." Vista may prompt you to confirm the privilege elevation required for driver installation. Confirm it.
Freezing on "cache.rfs"
searching on google i found a website called fractionalphones.com, the post was about this and it said what i had to do was reboot my computer and hit F8 (just keep touching it) and when it gets to the "safemode screen" arrow down to "Disable Digital Signature Verification"
Also a problem i had was the usb port i was using... so if it does not work try a new port!
Click to expand...
Click to collapse
Perfect,thanks.Previous to the J16 OTA update,I just held volume down/power.
I flashed back to stock to make sure I'd get the update without a hitch,which I did.
trunkstar1 said:
That did help, thanks. And, with some help from other XDA forumers I got the right drivers installed and I'm in motion now. Thanks again.
Click to expand...
Click to collapse
Coolness! Pass on the knowledge!
This is the same method I tried last night. Mine wont get past the bootup sequence. any help?
wicked1lbc said:
This is the same method I tried last night. Mine wont get past the bootup sequence. any help?
Click to expand...
Click to collapse
Try re-downloading the files and doing it again, maybe you got a bad file or something? This should work and if it does not... like I said I'm brand new to this, I had a problem figured out how to fix it and figured share the info, if it does not work for you, hopefully someone with more knowledge will chime in.
The tinyurl link you posted is bad. Looks like too many people have downloaded and the account is suspended :/ can someone upload them to somewhere else? I really need them
hiddengopher said:
The tinyurl link you posted is bad. Looks like too many people have downloaded and the account is suspended :/ can someone upload them to somewhere else? I really need them
Click to expand...
Click to collapse
this is correct, i do not need this right now but it would be nice to have
Hey guys, I am new at this My status stays at file analysis. My phone is in download mode as well.
SORRY! i have been away from the computer for a few days :-/
go to this thread
http://forum.xda-developers.com/showthread.php?t=732458
it has all the info you will need AND THEN SOME! it has the proper files and a little instruction spot with it... plus that one gives your the update.
if you still have trouble come back and i will try to help!
rcanela1 said:
Hey guys, I am new at this My status stays at file analysis. My phone is in download mode as well.
Click to expand...
Click to collapse
try switching usb ports.. i remember that happening to me.. i dont remember what i did tho haha.
im sure a google search will help with that one thats what i did
This tutorial is for the LG L5 II (E455/E460) and shall work on other LG phones too.
Many thanks to @iulykenoby who discovered this method.
To start, download a KDZ firmware for your LG E460 (and other phones) from here: http://lg-phone-firmware.com/index.php
Be sure to match the phone with the right kdz!!!
1. Download LG_KDZ_FW-Update_OfflineFix.ZIP (attached)
2. Download USB Driver http://algmcdn.lgmobile.com/dn/downloader.dev?fileKey=UW00120120425
If you can't boot anymore, enter into download/emergency mode and skip to step 5.
3. Put your phone in debugging mode (menu-Settings-Developer options-USB debugging).
4. Change your usb connection type to LG Software (menu-Settings-USB connection type)
5. Connect your phone to the PC and install USB Driver. After the installation disconnect and connect your phone again (to make sure it is detected).
6. Extract LG_KDZ_FW-Update_OfflineFix.ZIP
7. Run B2CAppSetup.exe and let it install and update itself. You may be prompted to update your drivers.
8. If you've done everything correctly, you should see this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
9. Close the official LG Mobile Support Tool.
10. Open Notepad in Administrator mode. (Go to windows menu, type notepad and right-click and run in Administrator mode)
11. Open the hosts file (c:\windows\system32\drivers\etc)
12. Add 127.0.0.1 csmg.lgmobile.com at the end of the host file.
13. Save the file. If the "Save as" dialog opens, it means you're not running notepad in administrator mode and you can't modify the hosts file.
14. Go to windows menu, type cmd and right-click and run in Administrator mode.
15. Drag Automatic Offline Procedure.vbs over command prompt and hit enter.
16. Click OK
17. Click on windows enable icon in system tray to turn ON then click the dialog box OK.
18. Click Ok.
19. Make sure Type is set to 3GQCT and phone mode to DIAG. Select your KDZ file and click Normal web upgrade test.
20. Click on Upgrade Start.
21. Click on Clear phone Software update Registry and then click OK.
22. Software Update Procedure will start immediately. It will take some time to finish.
After the flashing procedure, don't forget to delete that line you added in hosts or else you won't be able to officialy update (online) your phone and you won't be able to download anything from lg. Also, a factory reset may be needed after flashing to avoid conflicts with the old app data.
Ohhhhhh thx mircea, work for me. The problem was on step 19, now it's all ok.
marce78 said:
Ohhhhhh thx mircea, work for me. The problem was on step 19, now it's all ok.
Click to expand...
Click to collapse
You're welcome.
hey man thanks for the tutorial
I have a question though
what is the difference between version 10a, 10b, 10c ect
is it different firmware versions? can I flash a firmware from another country?
Is this official LG firmware?
Help me! My l5 e455 no more power
I followed all the steps and when the phone is not restarted, came in upload mode! Then I hung up and he did not start anymore!
Thanks for the tutorial. I needed that :good:
alonghinotti said:
I followed all the steps and when the phone is not restarted, came in upload mode! Then I hung up and he did not start anymore!
Click to expand...
Click to collapse
Try booting again in upload mode. If I remember right it's: phone off and both volume keys pressed then introduce the usb cable. if you manage to boot in download mode, you can try to flash again. you surely didn't select the right kdz for your phone. be sure of your phone model and search for the right kdz for your phone. If you can boot in download mode nothing is lost, you can fix it.
Work
mircea89fzr said:
Try booting again in upload mode. If I remember right it's: phone off and both volume keys pressed then introduce the usb cable. if you manage to boot in download mode, you can try to flash again. you surely didn't select the right kdz for your phone. be sure of your phone model and search for the right kdz for your phone. If you can boot in download mode nothing is lost, you can fix it.
Click to expand...
Click to collapse
It worked! I managed to get into download mode, and downloaded the correct ROM! Thank you!
alonghinotti said:
It worked! I managed to get into download mode, and downloaded the correct ROM! Thank you!
Click to expand...
Click to collapse
You're welcome! don't forget to press thanks.
tnx for the useful guide, new E455 owner here.
I'm looking for ROM backup solution, Root of course and a compatible CWM for thise model.
are there such tools out yet or we have to sit tight for a while?
Axims said:
tnx for the useful guide, new E455 owner here.
I'm looking for ROM backup solution, Root of course and a compatible CWM for thise model.
are there such tools out yet or we have to sit tight for a while?
Click to expand...
Click to collapse
For root, the attached file should work (change it's extension from .zip to .exe). Instructions here: http://forum.xda-developers.com/showthread.php?t=2337802
it will root with a chineese tool, but there you'll also find instructions to change it to supersu/superuser.
slipsystem said:
hey man thanks for the tutorial
I have a question though
what is the difference between version 10a, 10b, 10c ect
is it different firmware versions? can I flash a firmware from another country?
Is this official LG firmware?
Click to expand...
Click to collapse
you can flash any firmware from any country as long as it is for your phone model. i recommend you flash a firmware that's not branded (for ex branded by orange) so you won't have extra software that will slow down your phone. on that website you will find firmwares for many phones. our phone (e460) received an update, that's why they are called "a" "b" "c".
mircea89fzr said:
you can flash any firmware from any country as long as it is for your phone model. i recommend you flash a firmware that's not branded (for ex branded by orange) so you won't have extra software that will slow your phone. on that website you will find firmwares for many phones. our phone (e460) received an update, that's why they are called "a" "b" "c".
Click to expand...
Click to collapse
thanks alot man just the answer I was waiting for.
Malware
I suggest that you run that VROOT program in a sandbox as it is full of Malware or wait till someone posts an open source root exploitation method.
topkat0 said:
I suggest that you run that VROOT program in a sandbox as it is full of Malware or wait till someone posts an open source root exploitation method.
Click to expand...
Click to collapse
I suggest you change your antivrus. On virustotal.com out of 43 antivirus apps only 1 found it as malware.
https://www.virustotal.com/ro/file/...ace3dbf4a827df5c59748b095a23f2b4314/analysis/
Symantec: WS.Reputation.1 (http://www.symantec.com/security_response/writeup.jsp?docid=2010-051308-1854-99 )
I and others used vroot and had no problem with viruses or such. Stop spreading false information.
Malware
Mircea,
I dont use or trust online scanners I prefer to use IDA and other tools to examine software. If you examine the software more closely you will find that it sends your PC information back to the author. It will also do an update check and install of the latest version automatically. It will also install an apk for a chinese file sharing site and multiple other files that he leaves in the phones system. I also rooted a test phone and it did root perfectly. I was not trying to scare people just give a little warning to be cautious when you install a program that has a primary interface language is not yours. I had no ill intentions just trying to make people aware of what I had found.
topkat0 said:
Mircea,
I dont use or trust online scanners I prefer to use IDA and other tools to examine software. If you examine the software more closely you will find that it sends your PC information back to the author. It will also do an update check and install of the latest version automatically. It will also install an apk for a chinese file sharing site and multiple other files that he leaves in the phones system. I also rooted a test phone and it did root perfectly. I was not trying to scare people just give a little warning to be cautious when you install a program that has a primary interface language is not yours. I had no ill intentions just trying to make people aware of what I had found.
Click to expand...
Click to collapse
Yes, it installs a chineese apk because that's the root application (just like superuser). After installing supersu and deleting the chineese apk I scanned my phone with bitdefender and avg and found no malware.
You also can disable your internet before installing vroot on your computer, root your phone then uninstall it. Then you can scan your computer with any antivrus and antispyware software you want and you won't find a trace of Vroot. Before saying it's full of malware, you should prove it. I just proved with 43 antiviruses that it has no malware and all you're saying is you don't trust them. I also offered a solution to avoid sending information about your computer, IF that was the case. Also, using a sandbox just like you said is also ok.
How to get into download mode for e450
Sent from my LG-E450 using XDA Premium 4 mobile app
hussain59 said:
How to get into download mode for e450
Sent from my LG-E450 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Remove the battery, then reinsert the battery.
press volup + vol down
plug in the usb cable
.
your phone will start download mode
slipsystem said:
Remove the battery, then reinsert the battery.
press volup + vol down
plug in the usb cable
.
your phone will start download mode
Click to expand...
Click to collapse
Volume up down both buttons at a time got it thanks btw l5ii has a locked bootloader
Sent from my LG-E450 using XDA Premium 4 mobile app
I have made this tutorial due to me not finding any other tutorials on fixing the problem presented in this guide. Dear admins if there is another guide on how to fix this problem please feel free to do what you must to this thread. Thank You
First of all is if you have the security error problem on your phone I can assure you that it is NOT bricked and can be fixed.
Also I am not and will not be accountable if this guide does not fix your phone. I also will not and should not be held accountable if this guide is to further damage anything of your phone.
PROCEED WITH CAUTION; Please Pre-Read this guide and understand it before proceeding.
Okay so I will guide you through on how to fix the security error problem most people have on their LG devices. I had encountered this problem on my friends LG MS769 (Optimus L9 – MetroPCS). This guide should work for mostly any LG phone.
This happened to me when I was flashing a custom recovery for the phone. I had successfully rooted the phone using a guide located at:
androidforums.com/optimus-l9-all-things-root/759935-how-root-metropcs-l9-lgms769.html
By following the above guide you will be able to successfully root and install SuperSU on you LG MS769. But keep in mind that even though it will root the phone is will NOT, I don’t know how to emphasis this as much, it will NOT: Unlock the BootLoader, Flash a custom recovery, or let you install a Custom Rom.
But let us come back the topic at hand. Okay so to fix this problem we will need the following.
LG Mobile Support Tool -- B2CAppSetup.exe -- Attached
A reliable Internet Connection
A computer with Windows XP/Vista/7/8 – (Untested on Windows 8)
TIME and PATIENCE --- We will be downloading a file about 500MB give or take some.
Okay let us begin in our endeavors of fixing our problems.
First use the below download link to download the LG Mobile Support Tool
After downloading that place it on your desktop and run it as administrator
After you run B2CAppSetup.exe it should automatically open the Mobile Support Tool, if not there should be a new .exe created on the desktop called LGMobile Support Tool just double click and open that.
Let the program update and install any necessary files that it requires. (It should automatically start to update and install, it should just prompt you with a UAC window)
Once you see the program open, click on the Install USB Driver button on the top left-hand side
Then a new window will come up asking for you for the phones carrier and the phones model number.
Once you are successfully done installing the drivers, we can proceed to the restoration process of the phone
Okay now we need to put the phone in S/W Upgrade Mode.
a.Remove phone battery, if it does not have a removable battery make sure phone is off
b.While holding down the VOLUME (DOWN or UP or BOTH) BUTTON(S) insert the microUsb in the phone while also having the USB side connected to the computer already. (To enter S/W mode it varies phone to phone which volume buttons must be pressed, try all three options)
Once the phone is in S/W Upgrade Mode the computer will start to install the drivers and the LG Mobile Support Tool will automatically detect it and start the restore process
a.Keep in mind that this process takes its time and should more than likely complete successfully giving you a working phone
b.NOTE: I have read some people calming that the process gets stuck at 4% and does not go on. If it does happen to get stuck at any percentage let it stay there for a while and see if it does go on, if not I would recommend retrying once on the same computer and if it still does not work I would give a second recommendation to try on another computer. Other than that I would suggest you contact you phone carrier or LG.
If all goes well you should have a fully functioning factory restored LG phone. Congratulations!!!!
Hope this guide was of help and I wish you best of luck in your further endeavors. :good:
punjabi4life said:
...
Click to expand...
Click to collapse
Thanks for the information but to enter S/W update mode I think after remove battery your should hold VOL+ then connect usb cable, not VOL-. Plesae update this, I'll link it in my signature:good:
Thanks I looked this up and fixed the instructions above :thumbup:
Sent from my Nexus 4 using xda app-developers app
LG Optimus F160L
Have you tried this method on LG Optimus F160L. I also stuck on this mobile.
Check my thread
http://forum.xda-developers.com/showthread.php?p=46564691#post46564691
No I have not. But more than likely my method to restore should fix it
Sent from my Nexus 4 using xda app-developers app
Security Error corrected!
Thanks for this info! I was able to update the SW from the LG Support Tool program but I had to switch to another computer to do it, and after several tries it finally took.
For this LG-P769 I had to hold the volume up button with the battery out and it went into the SW update mode on the phones screen. The update stopped after 33% update and I had to disconnect and install the battery, start the phone and let the Security Error extinguish, then plugged the USB cord back in and click the retry button of the tool, then it updates. Yes!
Note, wait until the phone reboots to the normal operating screen even though the tool says its done. This tool approx. 2 more minutes.
The phone is no longer rooted but it kept all the original apps except "Superus".
Not working for me, any help?
I have an LG-LS970, and I've made it to the point where the recovery software was downloaded and extracted, but something is causing an error and not letting the process finish. I assume this is the faulty ROM on the phone, since my phone is bricked from rooting and deleting Google Play apps (I was stupid and thought they weren't important to have). Any ideas?
If you had the recovery software installed you could of installed the gaps. Zip files through it.
Sent from my LGMS769 using XDA Premium 4 mobile app
Please help i've been at this for 2 days
I moved a boot.img file to my Metropcs LG optimus L9 lgms769 and now I am stuck at the security error. I rooted the phone but did not have the bootloader unlocked. I have tried the update tool and it stops at 4%, when I can get it to work. I haven't either understood the other methods mention or something, idk. Anyway, I would really like to get my phone working. Can someone please give me a good way to do this. I have the V10E_00.kdz file already. Thankyou
I already have the latest version but need to repair
Thanks for the instructions! I followed the steps and everything basically works but once the phone is in software upgrade mode, the LG tool just says "Your device has the latest software available from the LG Mobile Support Tool" and it doesn't install anything.
What happened is I rooted my phone and removed one too many system apps, now it won't boot up anymore. How can I get this tool to reinstall the same software I already have? Do I need to wipe it completely? Please help me out, I'm afraid I'll make it worse if I try anything else.
ivocado said:
Thanks for the instructions! I followed the steps and everything basically works but once the phone is in software upgrade mode, the LG tool just says "Your device has the latest software available from the LG Mobile Support Tool" and it doesn't install anything.
What happened is I rooted my phone and removed one too many system apps, now it won't boot up anymore. How can I get this tool to reinstall the same software I already have? Do I need to wipe it completely? Please help me out, I'm afraid I'll make it worse if I try anything else.
Click to expand...
Click to collapse
Hi ivocado, you could try this way:
http://forum.xda-developers.com/showthread.php?p=50729855
Cheers. Good luck.
Sent from my LG P76020L-EUR-XX unlocked and rooted
Thank you!
BajoPrimate said:
Hi ivocado, you could try this way:
http://forum.xda-developers.com/showthread.php?p=50729855
Cheers. Good luck.
Sent from my LG P76020L-EUR-XX unlocked and rooted
Click to expand...
Click to collapse
Thank you so much! I totally overlooked the recovery option in the tool. 30 minutes later and I have my phone back working perfectly. So happy! :good:
I took it to the T-Mobile store this morning and all they wanted to do was sell me a new one, saying the phone was dead. I owe you. Can I buy you a beer? Seriously, if you have PayPal I'll do it.
ivocado said:
Thank you so much! I totally overlooked the recovery option in the tool. 30 minutes later and I have my phone back working perfectly. So happy! :good:
I took it to the T-Mobile store this morning and all they wanted to do was sell me a new one, saying the phone was dead. I owe you. Can I buy you a beer? Seriously, if you have PayPal I'll do it.
Click to expand...
Click to collapse
Hi ivocado, you're welcome, I'm very, very happy with your success.
Cheers. Good luck.
Sent from my LG P76020L-EUR-XX unlocked and rooted
ivocado said:
Thank you so much! I totally overlooked the recovery option in the tool. 30 minutes later and I have my phone back working perfectly. So happy! :good:
I took it to the T-Mobile store this morning and all they wanted to do was sell me a new one, saying the phone was dead. I owe you. Can I buy you a beer? Seriously, if you have PayPal I'll do it.
Click to expand...
Click to collapse
Do you have any photos or screenshots on how your lg support tool looks like? Im having some difficulty since the software doesnt download.
ivocado said:
Thanks for the instructions! I followed the steps and everything basically works but once the phone is in software upgrade mode, the LG tool just says "Your device has the latest software available from the LG Mobile Support Tool" and it doesn't install anything.
What happened is I rooted my phone and removed one too many system apps, now it won't boot up anymore. How can I get this tool to reinstall the same software I already have? Do I need to wipe it completely? Please help me out, I'm afraid I'll make it worse if I try anything else.
Click to expand...
Click to collapse
Re install stock ROM!
perfect with lte2
punjabi4life said:
I have made this tutorial due to me not finding any other tutorials on fixing the problem presented in this guide. Dear admins if there is another guide on how to fix this problem please feel free to do what you must to this thread. Thank You
First of all is if you have the security error problem on your phone I can assure you that it is NOT bricked and can be fixed.
Also I am not and will not be accountable if this guide does not fix your phone. I also will not and should not be held accountable if this guide is to further damage anything of your phone.
PROCEED WITH CAUTION; Please Pre-Read this guide and understand it before proceeding.
Okay so I will guide you through on how to fix the security error problem most people have on their LG devices. I had encountered this problem on my friends LG MS769 (Optimus L9 – MetroPCS). This guide should work for mostly any LG phone.
This happened to me when I was flashing a custom recovery for the phone. I had successfully rooted the phone using a guide located at:
androidforums.com/optimus-l9-all-things-root/759935-how-root-metropcs-l9-lgms769.html
By following the above guide you will be able to successfully root and install SuperSU on you LG MS769. But keep in mind that even though it will root the phone is will NOT, I don’t know how to emphasis this as much, it will NOT: Unlock the BootLoader, Flash a custom recovery, or let you install a Custom Rom.
But let us come back the topic at hand. Okay so to fix this problem we will need the following.
LG Mobile Support Tool -- B2CAppSetup.exe -- Attached
A reliable Internet Connection
A computer with Windows XP/Vista/7/8 – (Untested on Windows 8)
TIME and PATIENCE --- We will be downloading a file about 500MB give or take some.
Okay let us begin in our endeavors of fixing our problems.
First use the below download link to download the LG Mobile Support Tool
After downloading that place it on your desktop and run it as administrator
After you run B2CAppSetup.exe it should automatically open the Mobile Support Tool, if not there should be a new .exe created on the desktop called LGMobile Support Tool just double click and open that.
Let the program update and install any necessary files that it requires. (It should automatically start to update and install, it should just prompt you with a UAC window)
Once you see the program open, click on the Install USB Driver button on the top left-hand side
Then a new window will come up asking for you for the phones carrier and the phones model number.
Once you are successfully done installing the drivers, we can proceed to the restoration process of the phone
Okay now we need to put the phone in S/W Upgrade Mode.
a.Remove phone battery, if it does not have a removable battery make sure phone is off
b.While holding down the VOLUME (DOWN or UP or BOTH) BUTTON(S) insert the microUsb in the phone while also having the USB side connected to the computer already. (To enter S/W mode it varies phone to phone which volume buttons must be pressed, try all three options)
Once the phone is in S/W Upgrade Mode the computer will start to install the drivers and the LG Mobile Support Tool will automatically detect it and start the restore process
a.Keep in mind that this process takes its time and should more than likely complete successfully giving you a working phone
b.NOTE: I have read some people calming that the process gets stuck at 4% and does not go on. If it does happen to get stuck at any percentage let it stay there for a while and see if it does go on, if not I would recommend retrying once on the same computer and if it still does not work I would give a second recommendation to try on another computer. Other than that I would suggest you contact you phone carrier or LG.
If all goes well you should have a fully functioning factory restored LG phone. Congratulations!!!!
Hope this guide was of help and I wish you best of luck in your further endeavors. :good:[/QUOTE
Ok its perfect but when install spinx.zip cstm rom it stucks n same lg security eror
Click to expand...
Click to collapse
izhar_ulhaq said:
Ok its perfect but when install spinx.zip cstm rom it stucks n same lg security eror
Click to expand...
Click to collapse
Hi izhar_ulhaq, if you don't unlock the bootloader, you can't flash a custom recovery nor install a custom rom.
Cheers. Good luck.
Sent from my LG P76020L-EUR-XX unlocked and rooted
Help! The LG Mobile Support Tool is frozen at "Analyzing phone setting..." and I am at the S/W Upgrade screen.
I forgot to unlock the bootloader before installing custom recovery..
how to fix lg security error issue
yup i did just that now my phone works fine i have a metropcs lg ms770 the only thing peoploe should realize is that it takes time the computer tells you its updating and its done but when you check your phone it's really back to the same issue . you guys need to try it couple of times if it dosent work the computer needs to make that connection in order to run perfect if theres no connection theres no udate keep that in mind peace......
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is it working? My phone is in S/W Upgrade mode, but I don't see any upload bar anywhere
Background:
I originally had CWM and custom rom install on my phone. I decided to install a new rom, but the installation failled and Aroma installer kicked me out of recovery. I have no way re-entering recovery, so I used Smart Flasher and the correct ROM to flash the phone back. And now I'm stuck at Security Error.
I tried to flash latest rom from Asus website to my new Zenfone C because it had a weird issue, it came the user interface in taiwanesse, but when trying to change to english, it stayed in taiwanesse, so I wasnt able to setup it in first place.
Then, it came to my mind to flash the latest rom, and I used this guide in absence of a Zenfone C guide for flashing:
http://en.zenfoneasus.com/zenfone-recovering-returning-stock-rom-downgrade-clean-update-guide/
I did all the steps listed there first, and then tried the steps but with the red marked steps, flashing the dnx and ifwi also, no result.
The problem is that now im stuck in a bootloop, and cant advance from there, the Asus logo stays there forever.
What happened during flashing is this:
When I sideloaded the update.zip containing latest rom from Asus website, it said:
-Installing update
-Device image SKU: ww
OTA image SKU: WW
and suddenly after that it restarted, showed a huge Intel Inside logo that I never saw and then went to the dead android image. After waiting a while, the phone restarts, this time only showing the Asus logo with the Intel Inside logo beneath it (not the Intel Inside logo only that I mentioned earlier), and stays there forever.
I dont know what else to do, I dont know if Im doing something wrong.
Were you ever able to fix the problem?
No, until now, no
Sent from my Nexus 5 using Tapatalk
Solved!!!
Hey Spartan!
I was searching online about nexus 5 to buy one but I found something else randomly in an Indonesian blog and was able fix my phone! Hardly took about 15 minutes
I will be posting the solution soon... I hope you are still in need?
kkdevta said:
Hey Spartan!
I was searching online about nexus 5 to buy one but I found something else randomly in an Indonesian blog and was able fix my phone! Hardly took about 15 minutes
I will be posting the solution soon... I hope you are still in need?
Click to expand...
Click to collapse
I still need the fix man, I will really appreciate the posting of the solution! thanks in advance!
Sent from my Nexus 5 using Tapatalk
The Fix!
First Download: -
USB Drivers: http://www.asus.com/in/Phones/ZenFone_C_ZC451CG/HelpDesk_Download/
Asus Flash Tool v1.0.0.11: https://drive.google.com/file/d/0B7cZB2l2IKlKMENKUWlVaHJ3ZHM/view
Signed Rom zip image: https://drive.google.com/file/d/0B__oiYlSY-brdHFWMy1OWXNrajg/view
The Process: -
Get your phone to boot into fastboot mode by pressing [vol -] button and power button simultaneously for few seconds.
Connect to your PC and install USB drivers if not done already. The phone should show up as an "ASUS Android Composite ADB Interface" in the Device Manager.
Now, open ASUS Flash Tool :-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It should detect your phone with serial number and blue orb in front of it.
Select your phone model i.e. ZC451CG
Choose if you want to wipe data or not. I chose "Wipe Data" since I had everything backedup on asus web storage.
Click that box icon and browse for the signed zip image file you downloaded earlier.
Select your device on the ASUS flash Tool by clicking on the serial number like shown in the picture below.
( It had me scratch my head after one failed attempt because I didn't select it the first time! :silly
Click on the green start button, be patient, stay calm and cross your fingers. This could take 10-20minutes or so.:fingers-crossed:
If everything went well your phone should bootup to the welcome screen like the day 1 you got it.
Now, the zip image is quite old so after the initial setup the phone would prompt you with lots of system and app updates. Go with it and enjoy! :victory:
Lastly, don't be shy of pressing that " :good:Thanks! " button if this post helped you.
Thanks man, I will try tonight. Do you know if this works under Windows 8.1 64bits??. I see the screenshots are from windows 7.
Spartan Legionnaire said:
Thanks man, I will try tonight. Do you know if this works under Windows 8.1 64bits??. I see the screenshots are from windows 7.
Click to expand...
Click to collapse
Hopefully it should, I did it on a Windows 7 Professional 64 bit machine.
The USB drivers you download has Windows 8 drivers in it. I think that's all that is needed.
Yeah, I will try it then, and report back, thanks again.
Sent from my Nexus 5 using Tapatalk
kkdevta said:
First Download: -
USB Drivers: http://www.asus.com/in/Phones/ZenFone_C_ZC451CG/HelpDesk_Download/
Asus Flash Tool v1.0.0.11: https://drive.google.com/file/d/0B7cZB2l2IKlKMENKUWlVaHJ3ZHM/view
Signed Rom zip image: https://drive.google.com/file/d/0B__oiYlSY-brdHFWMy1OWXNrajg/view
The Process: -
Get your phone to boot into fastboot mode by pressing [vol -] button and power button simultaneously for few seconds.
Connect to your PC and install USB drivers if not done already. The phone should show up as an "ASUS Android Composite ADB Interface" in the Device Manager.
Now, open ASUS Flash Tool :-
It should detect your phone with serial number and blue orb in front of it.
Select your phone model i.e. ZC451CG
Choose if you want to wipe data or not. I chose "Wipe Data" since I had everything backedup on asus web storage.
Click that box icon and browse for the signed zip image file you downloaded earlier.
Select your device on the ASUS flash Tool by clicking on the serial number like shown in the picture below.
( It had me scratch my head after one failed attempt because I didn't select it the first time! :silly
Click on the green start button, be patient, stay calm and cross your fingers. This could take 10-20minutes or so.:fingers-crossed:
If everything went well your phone should bootup to the welcome screen like the day 1 you got it.
Now, the zip image is quite old so after the initial setup the phone would prompt you with lots of system and app updates. Go with it and enjoy! :victory:
Lastly, don't be shy of pressing that " :good:Thanks! " button if this post helped you.
Click to expand...
Click to collapse
IT WORKEEEED!!!! I dont know how to thank you man!. Thank you so much, I was going to give up on this device!. Its working really well.
The only thing I came into trouble, was to install the USB drivers included in the Asus Flash Tool. I did the following (on Windows 8.1 64bits):
I disabled driver signature check first on windows.
I went to the USB drivers folder inside the ASUS Flash tool folder on Program Files.
I went here C:\Program Files (x86)\ASUS\ASUS Flash Tool\Driver\USBDriverInstaller\devcon\x64
On that folder, there is a program called devcon.exe, right click on it, and select properties.
On compatibility tab select Run as Administrator, click ok.
After this, reinstall USB drivers by going to C:\Program Files (x86)\ASUS\ASUS Flash Tool\Driver\USBDriverInstaller and here execute install_drivers.bat
Thats it, the phone now should be recognized by the Asus Flash Tool.
I always failed when downloading Signed Rom zip image.. Someone please provide mirror... Thanks
Tjecing said:
I always failed when downloading Signed Rom zip image.. Someone please provide mirror... Thanks
Click to expand...
Click to collapse
Use a download manager like "free download manager" or something. I am on a slow network to re-upload it else where.
kkdevta said:
Use a download manager like "free download manager" or something. I am on a slow network to re-upload it else where.
Click to expand...
Click to collapse
I don't know how to thank You.. But thanks a lot you safe my days..
Can any one plz give me the link of any custom recovery for asus zenfone c.....i badly need it plz help me...thnks in advance.....plz give me..and tell me how to flash it.....
do you know where i can find the correct .raw file for asus zenfone 5 A501CG ? i use lollipop, i dont know if that's matter =s
Anyone help me When I press volume- and power, it can't enter to fastboot. And when I plug the cable, the flash tool can't detect it
Sent from my Mi 4i using XDA Free mobile app
hello brother...can you help me...
my zenfone 5 a500cg has been softrick and bootloop to...
if i'm turn on my phone
logo asus and then usb logo and then dead again...
i can't log into fastboot(power on+vol up)..
but i can log into cwm philz...
i try flash via adb sideload but always error bla bla bla tmp/updated.zip
if i try other ROM always like this ( please upgrade to image 4.3 first)
i try xftsk but always windriver error( i am use notebook win7)
i try asus flashtool with .raw zip rom but my serial number error just 12345678abcdef...
if i click start always device not detect...
help me bro
disappear3896 said:
Anyone help me When I press volume- and power, it can't enter to fastboot. And when I plug the cable, the flash tool can't detect it
Click to expand...
Click to collapse
power and volume up (+)
Spartan Legionnaire said:
IT WORKEEEED!!!! I dont know how to thank you man!. Thank you so much, I was going to give up on this device!. Its working really well.
The only thing I came into trouble, was to install the USB drivers included in the Asus Flash Tool. I did the following (on Windows 8.1 64bits):
I disabled driver signature check first on windows.
I went to the USB drivers folder inside the ASUS Flash tool folder on Program Files.
I went here C:\Program Files (x86)\ASUS\ASUS Flash Tool\Driver\USBDriverInstaller\devcon\x64
On that folder, there is a program called devcon.exe, right click on it, and select properties.
On compatibility tab select Run as Administrator, click ok.
After this, reinstall USB drivers by going to C:\Program Files (x86)\ASUS\ASUS Flash Tool\Driver\USBDriverInstaller and here execute install_drivers.bat
Thats it, the phone now should be recognized by the Asus Flash Tool.
Click to expand...
Click to collapse
First and foremost, follow Spartan about how to deal with the driver install error. Read above. Second, those are the links for the raw images:
ww_A500CG_3.23.40.60_20150630.raw and many other phones. It was posted by thanhthuy. 500CG Lollipop: https://mega.nz/#!jwBDUKzJ!x3VD9VJrMe0CBs353DVnXlHr2dHQXepjcqtrR0gQDdU
500CG kitkat:
https://mega.co.nz/#!H8YkyLba!4Ye52JKAjzogGRVvCx2r9XoJIhou_uY3z6YH1xBges8
400CG 6.6.3 - https://mega.co.nz/#!HoRRnLCL!CV-iCMEUgRd_LwDc4QgNkevxKIGOKtFGDYrytt59EVE
400CG 7.3.3 - https://mega.co.nz/#!G8hRwYqR!Eu_l6r_6QSbhjID-MtYQU3v0q0voQ0GYkFeayy-3MFI
451CG: https://mega.co.nz/#!794U1TpT!rermqclZOpPKcYZY8z2YezUkQE-MWjYJgqyKMUAjYDo
600cg Kitkat: https://mega.co.nz/#!S1wlnYhC!doCPvf7ukeEFStcJPgqaEViE5oiHb_hpGSGnIh3n1IQ
Here for 600cg lollipop: https://mega.co.nz/#!3p4wBQAY!KUx26zaGdCBU6CGa4g68zT_iX9NxmIQCUvHiolfa_Oo
ZE550ML Lollipop 40.23 : https://mega.co.nz/#!HgBSySZA!EOxpsmPvHgCfl-9jUVRAv624Uq9LG4uvxuN83j6-P-k
ZE550ML Lollipop 40.40: https://mega.co.nz/#!P4RmXIwb!-xrDe8AYXdprZgUG4Ehs8fLNHhrdKpXdmaV3FBWPC_0
ZE551ML Lollipop: https://mega.co.nz/#!i4JRAQDR!9DzxtSd1oxDuCV6oc0rEhm-1sF4SA-94YPG9fLVw_lw
Source using Google cache (Vietnamese): http://webcache.googleusercontent.com/search?q=cache:w5AS-N1JrAoJ:zenphoneviet.com/threads/all-zen-stock-rom-firmware-kk-l-update-hang-tuan-chay-bang-asus-flash-tool.7066/+&cd=1
---------- Post added at 07:31 AM ---------- Previous post was at 07:29 AM ----------
Those raw files are extremely difficult to find so if you pretend to have any of those phones i recommend to download. It works easily if you have fastboot. If you only have adb i did not saw working but i am trying.
---------- Post added at 07:38 AM ---------- Previous post was at 07:31 AM ----------
If you try to do that under adb they give a serial number mistake.
4 days trying to solve this bootloop using adb. At least one person here saved his phone with the raw links i found using google webcache in this vietnamese link so it was worth it. Looks like i will need to lose 40 days sending to Asus in Sao Paulo. What a hell folks, those asus firmwares are really crap. Set a great hardware for set poor software.
why my phone does not give any reaction when press power button+vol
I had same problem but different situation....I tried to make an experiment by changing systemui and I had done it with a wrong step .lucky I make a backup and tried to recover it.
But Things get worst when it failed to backupbang now my phone get stuck to Asus logo.I tried to follow the method that your all give in this thread but I can go to fastbootode with it must press power button+col down button.
CAN ANYBODY HELP ME WITH THIS PROBLEM
Sorry for my bad English
And I'm a newbie and try to learn something from pro
Hello everyone,
I will share my experience with you, and I hope for a solution!
A few days ago I rooted my Lenovo tab 2 A10-30 successfully using Kingroot. Then, I tried to change Kinguser with SuperSU, which I also successfully did. However, I noticed that although the main root app was SuperSU, Kingroot was still on my phone, so I deleted it using a bloatware removal app and restarted the tablet. Now it won't turn on. It gets stuck at the Lenovo loading screen, and that's about it. When I press the power button + volume down button, it gets me to a Chinese menu that is not the recovery mode (there is no MMC, just options about voloume, colors, mic test etc). If I press the volume up+ volume down + power button, it just brightens the screen and shows nothing.
I tried flashing the stock ROM using the Smart Phone Flash Tool, but the PC does not recognize fully the tablet (it just prompts me to install the Lenovo USB drivers, and I cannot access the tablet's internal storage). Moreover, the Lenovo windows applications do not recognize the tablet when I connect it to the PC.
I really do hope that there is a way I can fix it.. Thank you all in advance.
Hi,
I did almost exactly the same... Kingroot, tried to remove bloatware with another app, and ended up with a bricked tablet I can still access the bootloader, but flashing the tablet from there is to no avail.
I am still looking for the original ROM, which seems nowhere to be found. Did you, by any chance, make a backup first?
Another one here But I'am able to go into recovery and into adb sideload, from there I can view internal memory(/system). And it looks like system is trying to load supersu-daemon which was removed and it can't get past that. I tried to recover paths (to original ones), but it still wont go past loading screen. (it is just restarting the app_process32).
Now if we only could get the hold on original factory firmware... from there one we can sideload it via fastboot.
And for the drivers you need andorid usb drivers https://developer.android.com/studio/run/win-usb.html#top
TLDR; we are looking for TB2-X30F_USR_S000015_1601151950_Q8009_ROW_qpst.zip
So, I have spent about 5 hours attempting to find a way to dump the firmware without first rooting the device, so that I could share it with you guys (and have a backup for myself in case I attempt to root it myself.) Unfortunately it seems like it needs to be rooted before I can create a nandroid backup through adb. Unfortunately the tablet is not based on mtk, and I cannot find any qualcomm utils that can dump the firmware.
The one Qualcomm util I found (QFIL) seems like it is only for flashing, and for backing up some individual data for the tablet (I assume it may contain such as license keys for the commercial features in the recent phones such as Sony Xperia Z3). I also looked into fastboot, and that too can only flash a new firmware.
So, unless the tablet gets rooted I don't see any way to make a proper backup.
I am unable to post links in messages, so you need to do some manual editing.
dz0ny said:
TLDR; we are looking for TB2-X30F_USR_S000015_1601151950_Q8009_ROW_qpst.zip
Click to expand...
Click to collapse
This however seems like very valuable information, unfortunately the only places I can find that has this available for download is charging money for access to the file.
50$ at dlgsm,com www DOT dlgsm DOT com/register.php?file=TB2-X30F_USR_S000015_1601151950_Q8009_ROW_qpst.zip&dir=%2FFLASH-FILES%2FLENOVO%2FT_Series%2FTB2-X30F
or from 10$ at pars-hamrah,com: www DOT pars-hamrah DOT com/%D8%A7%D8%AE%D8%A8%D8%A7%D8%B1-%D9%85%D8%B1%DA%A9%D8%B2-%D8%AF%D8%A7%D9%86%D9%84%D9%88%D8%AF-%D8%A7%D8%AE%D8%AA%D8%B5%D8%A7%D8%B5%DB%8C-%D9%BE%D8%A7%D8%B1%D8%B3-%D9%87%D9%85%D8%B1%D8%A7%D9%87/38027-%D8%B1%D8%A7%D9%85-%D8%A7%D9%88%D8%B1%D8%AC%DB%8C%D9%86%D8%A7%D9%84-%D9%84%D9%86%D9%88%D9%88-lenovo-tb2-x30f-%D9%86%D8%B3%D8%AE%D9%87-s000015-%D8%A7%D9%86%D8%AF%D8%B1%D9%88%DB%8C%D8%AF-5-1-1-%D8%AF%D8%B1-%D9%85%D8%B1%DA%A9%D8%B2-%D8%AF%D8%A7%D9%86%D9%84%D9%88%D8%AF-%D9%82%D8%B1%D8%A7%D8%B1-%DA%AF%D8%B1%D9%81%D8%AA.html"]Here[/URL]
It might also be available www DOT fars-gsm DOT com/75531-tb2-x30f_usr_s000015_1601151950_q8009_row_qpst-zip.html, at least they list the changelog for the firmware.
Since I have no use for a firmware right now, I will not be buying access to one (unless I at some point manage to brick mine as well). But if anyone decides to do so, please share it so others can enjoy it as well. I also suspect that if the file was available, it would increase the probability of someone attempting to make a custom rom at some point as well, it is a very cheap tablet when on sale, so it should have good potential for a community.
PS: I also stumbled over something called vRoot, that might be an alternative to Kingroot, although I have no idea whether it is as good at rooting and not installing unwanted extra apps. I guess someone who has used it on a tablet/phone that has a backup available might be able to shed some light on that.
---------- Post added at 08:08 PM ---------- Previous post was at 08:02 PM ----------
omrtpsycho said:
If I press the volume up+ volume down + power button, it just brightens the screen and shows nothing.
Click to expand...
Click to collapse
This is the QFIL (Qualcomm Flash something system) mode, however I do now know whether that helps anything at all. Since it seems to me it probably wont accept the TB2-X30F_USR_S000015_1601151950_Q8009_ROW_qpst.zip file mentioned in the thread. It seems to expect some xml file, maybe the zip file contains that?
Hi guys i have been strugling with this unit The last 3 days. I have eksakt same problem. I found these files: lenovo-forums.ru/files/category/106-прошивки-lenovo-tab-2-a10-30/
I extracted Them but dont know how to flash Them ?? Hope u guys Can help (sorry for bad english)
To Download files from Lenovo-forums.ru i logged in with my Google account
[PUT ROM TEMPORARILY HERE: https://www.wetransfer.com/download...024ee2974a44f8aa50e3dcd120160615184237/a84735 ]
Wow, suddenly action! With the help of Dead2 and Andersbp I have made some progress. Here are my steps:
I purchased the ROM from the Iranian site, and downloaded the other from the Russian forum. So now I have 2 ROMs:
65M TB2-X30F_S000015_160115_ROW_TO_TB2-X30F_S000016_160602_ROW_WCA72E4AB5.zip (Russian)
1.1G TB2-X30F_USR_S000015_1601151950_Q8009_ROW_qpst.zip (Iranian)
The smaller one is simply an update, which you could install easily:
1) boot into Recovery Mode
2) select "Apply Update from ADB"
3) run: adb sideload TB2-X30F_S000015_160115_ROW_TO_TB2-X30F_S000016_160602_ROW_WCA72E4AB5.zip
Which works... UNLESS YOU ROOTED THE DEVICE. Then it fails, and does not want to update. Thanks Lenovo
So, the larger one is a different type of ROM. This one will not load with adb sideload (gives footprint and signature error). But it DOES contain all the files to flash with QFIL (Qualcomm Flash something system).
Here I'm stuck. I followed this guide:
http://guidebelajar.blogspot.nl/2016/03/guide-how-to-flash-firmware-lenovo-vibe-p1.html
and tried to install these packages:
1) You must download and install USB Driver for Lenovo on your windows computer or PC.
2) QPST-2.7.422-qfil-qcom-Upgrade-Tool-20140422
3) Download Qualcomm HSUSB USB COM Drivers
(Note that you need to register and log in to needrom.com FIRST. Then click the link, but it will give an access error. Remove all in the URL after needrom.com (so go back to the main site), then go back to the download link, and it will work - the file is there.)
1) and 2) install pretty fine, but 3) is just a zip with a lot of drivers, no installer. I have no clue on how to install the proper driver...
Furthermore, the site suggests to install something on the device itself:
5) Create a folder with the name sdfuse in the root of the SD-card phone
6) Put the qsb-firmware (file with the extension .qsb) in the folder sdfuse.
Here I have 2 problems: First, my device does not boot, so I cannot create/copy files. Seconly: I cannot find qsb-firmware.qsb anywhere...
@ Dead2: How did you go through these steps?
Zwartoog said:
I purchased the ROM from the Iranian site, and downloaded the other from the Russian forum. So now I have 2 ROMs:
65M TB2-X30F_S000015_160115_ROW_TO_TB2-X30F_S000016_160602_ROW_WCA72E4AB5.zip (Russian)
1.1G TB2-X30F_USR_S000015_1601151950_Q8009_ROW_qpst.zip (Iranian)
Click to expand...
Click to collapse
Great, thanks for sharing the firmware, I hope you and everyone else with a softbricked tablet can get it fixed now
I am sure some of those would be willing to donate a couple of bucks to you if they get theirs working again.
Zwartoog said:
3) Download Qualcomm HSUSB USB COM Drivers
(Note that you need to register and log in to needrom.com FIRST. Then click the link, but it will give an access error. Remove all in the URL after needrom.com (so go back to the main site), then go back to the download link, and it will work - the file is there.)
1) and 2) install pretty fine, but 3) is just a zip with a lot of drivers, no installer. I have no clue on how to install the proper driver...
Click to expand...
Click to collapse
Ok, I used a LenovoUsbDriver_v1.0.12.exe driver installer, and that includes the HSUSB drivers needed, and I can confirm that windows recognizes the tablet as being in HSUSB mode with those. Whether QFIL does I have not tested.
I got the driver package from here: www DOT teamandroiders DOT com/lenovo-usb-drivers-download/
Zwartoog said:
@ Dead2: How did you go through these steps?
Click to expand...
Click to collapse
After you get past installing the HSUSB driver, you are officially the one that has gotten furthest on this.
I will assist in any way I can, but I will not attempt flashing my own tablet until I actually need to
Dead2 said:
After you get past installing the HSUSB driver, you are officially the one that has gotten furthest on this.
Click to expand...
Click to collapse
We'll get this working
Dead2 said:
Ok, I used a LenovoUsbDriver_v1.0.12.exe driver installer, and that includes the HSUSB drivers needed, and I can confirm that windows recognizes the tablet as being in HSUSB mode with those. Whether QFIL does I have not tested.
Click to expand...
Click to collapse
I tried that one too, but to no avail When I try to execute the executable, it ask for administrator permission, and after that vanishes...
I am running Windows 8, 64 bit. You?
Other question: when is your tablet recognised by Windows? Also in Recovery Mode?
Thanks!
Great work so far guys ! I Will try tomorrow with The new information! Mine is rootet so dont look good for me :/
Zwartoog:
The russian site also have Big files (1gb)
You Saw Them ?
Andersbp said:
Great work so far guys ! I Will try tomorrow with The new information! Mine is rootet so dont look good for me :/
Zwartoog:
The russian site also have Big files (1gb)
You Saw Them ?
Click to expand...
Click to collapse
No, I have spent too many hours translating Farsi today, was quite happy to find this one easily accessible on the Russian site
Can you check one of the bigger files? Might come in handy if my version seems incompatible for some reason...
Zwartoog said:
No, I have spent too many hours translating Farsi today, was quite happy to find this one easily accessible on the Russian site
Can you check one of the bigger files? Might come in handy if my version seems incompatible for some reason...
Click to expand...
Click to collapse
Sure Will try tomorrow
Huge breakthrough
I now have a unrootet, unbricked and stable unit again!
First i followed this guide:
https://2.bp.blogspot.com/-YxnBnMMx7Xg/VnaiVim76VI/AAAAAAAAURo/pz5IiaVdlcQ/s320/qfil.jpg
But insted of this:
9. Now, enter your Lenovo Vibe P1 into recovery mode. you can do it by :
Press the Volume Up button and keep holding it while connecting it to the computer/laptop using USB cable.
Lenovo Vibe P1 will vibrate one time, and you will see black screen.
You need to hold in VOLUME UP AND VOLUME DOWN AND POWER button at same time. Until you see
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now you can continue with the guide, and use QFIL.
I used this firmware: https://drive.google.com/open?id=0B9affStJ4JQ1U3JXUTZFTDJ6NU0
Extract the rar file. Inside you will find the files needed in QFIL.
Hope this helps you guys
Andersbp said:
Huge breakthrough
I now have a unrootet, unbricked and stable unit again!
First i followed this guide:
https://2.bp.blogspot.com/-YxnBnMMx7Xg/VnaiVim76VI/AAAAAAAAURo/pz5IiaVdlcQ/s320/qfil.jpg
But insted of this:
9. Now, enter your Lenovo Vibe P1 into recovery mode. you can do it by :
Press the Volume Up button and keep holding it while connecting it to the computer/laptop using USB cable.
Lenovo Vibe P1 will vibrate one time, and you will see black screen.
You need to hold in VOLUME UP AND VOLUME DOWN AND POWER button at same time. Until you see
Now you can continue with the guide, and use QFIL.
I used this firmware: https://drive.google.com/open?id=0B9affStJ4JQ1U3JXUTZFTDJ6NU0
Extract the rar file. Inside you will find the files needed in QFIL.
Hope this helps you guys
Click to expand...
Click to collapse
Super! Will try this tonight. Just in case: which Windows version are you using?
Zwartoog said:
Super! Will try this tonight. Just in case: which Windows version are you using?
Click to expand...
Click to collapse
I use windows 10
Andersbp said:
Huge breakthrough
I now have a unrootet, unbricked and stable unit again!
Click to expand...
Click to collapse
Great work! I am glad I was able to help you guys get this fixed
Andersbp said:
You need to hold in VOLUME UP AND VOLUME DOWN AND POWER button at same time. Until you see
Click to expand...
Click to collapse
Yep, its at the bottom of my first post also, found that out by accident while trying to get into the normal recovery.
Now, hopefully someone will want to port TWRP and CM13 or Paranoid to this tablet
Doh i did not see that Dead2
Thanks everybody together we defeated the problem !
SUPER! Succes here as well! The trick was indeed to hold both vol UP and DOWN
Now: brand-new unrooted device
Thanks
Btw: I noticed that the rom from Andersbp is a TB2-X30L rather than the TB2-X30F. I used my F file (paid for it, dammit ), and that one also works well.
I am currently checking if I can modify the stock ROM to enable root / mult-user. Any hints?
Nice zwartoog !
I Can root with kingroot.. Are there better alternatives ? Kingroot is Full of bloatware
Andersbp said:
Nice zwartoog !
I Can root with kingroot.. Are there better alternatives ? Kingroot is Full of bloatware
Click to expand...
Click to collapse
Noo, no Kingroot. That's where all the disasters began. It is full of bloatware. Trying to uninstall Kingroot lead to bricking the device
Personally I am only interested in re-enabling the multi-user feature from lollipop. WHICH IS FOR SOME REASON DISABLED BY LENOVO Even when rooted and modifying the system/build.prop did not re-enable it.
I'm giving up now. At least I have a workable device. Restored pride. And more important: 3 happy kids
I think the TB2-X30L is the LTE version of the tablet, while the TB2-X30F is the wifi-only version. If correct, then there should be no problem
when using the LTE on a non-LTE model, but the other way around could potentially cause LTE to not work. The LTE firmware might have some
extra apps and settings enabled to cater to this ability, but it might also be completely identical. Btw, what does the model information say
after being flashed with the L firmware? In any case it is useful to know that they are cross-compatible, since sometimes there can be differences
in chipsets or screens that can cause minor or major problems.
As I mentioned earlier, another root alternative to kingroot seems to be vRoot, but I have not tried it myself. But now that it is possible to
recover a bricked tablet, it is also less risky to test such things.
BTW: Please remember to use the "Thanks!" button on posts you find helpful, I have tried to do so myself on the posts that I find helpful