Hi this tutorial is for them who wants to upgrade to Android 6.0 on J5 and also for those who wants to downgrade back to 5.1 on their J5 (2015) manually using odin.
This tutorial will be divided into three section upgrade, downgrade and rooting.
Upgrade to Android 6.0
As Samsung has started rolling out android 6.0 for J5 (2015) model. It will be available to all the regions sooner or later on most of the models of J5. Incase if you are not getting OTA update of android 6.0 on your country and are curious to try Android Marshmallow, you can try to flash android 6.0 available for other country. For example: If you have J500H model and android 6.0 for J500H is available for some other countries but not in your country than you can download android 6.0 firmware of those countries and flash it through Odin.
Note: The model number of J5 should be same for example you cannot flash J500F firmware to J500H ,
you can only flash firmware of J500H to J500H, countries or area does not matter as long as the
device model is same.
Procedure:
1. Go to the link below and search for firmware for your device. (Eg: Galaxy J500H)
2. You will find firmware for various regions and android version. Download the android 6.0 firmware for your
region. If you don’t get android 6.0 for your region than download android 6.0 available for any region as you
prefer.
3. Download odin from the link below.
4. Backup any necessary things like apps, contacts or files as you may loose them.
5. Now follow the instruction given below and flash android 6.0 to your j5.
PRE-REQUIREMENTS:
Download & Install Galaxy USB Driver on your computer,
Enable USB debugging on your Galaxy J5 smartphone and OEM unlocking.
Your phone battery should be at 80% or above.
How to Install Stock Rom on Galaxy J5
1 . After downloading the Galaxy J5 Firmware and Odin software files from the download section.
2. Extract/unzip both files on your computer.
3. Now, boot your Samsung Galaxy J5 into download mode. To do that turn off the phone, after the phone is off,
press and hold the Volume Down + Home + Power buttons at the same time.
4. Connect your Galaxy J5 to your computer using USB Cable and wait till Odin software detects it. Once, Odin
software detects your phone, you will see the Added message on Odin.
5. Before installing the stock firmware on Galaxy J5 make sure that both Auto Reboot and F.Reset Time are selected.
Then, click on the AP button on Odin software and select the stock Rom where you have previously extracted it.
Now click start button. Odin will start flashing.
6. In the end, on the Odin software the pass message should be displayed and your Samsung Galaxy J5 will
reboot automatically.
7. Congratulation you have upgraded to android 6.0 Marshmallow.
Detailed tutorial for flashing via Odin:
https://androidmtk.com/flash-samsung-stock-rom-using-odin
Downloads:
1. Firmware
http://www.sammobile.com/firmwares/
http://updato.com/firmware-archive-select-model
2. USB driver
https://androidmtk.com/download-samsung-usb-drivers
3. Odin
https://androidmtk.com/download-odin-downloader-versions
Downgrade to Android 5.1.1
Incase if you don’t like android 6.0 and want to downgrade you can downgrade to android 5.1.1 by following these
steps.
1. Download 5.1.1 firmware for your region from the given link.
2. Follow the steps provided in above upgrade tutorial and flash the firmware using the Odin.
Rooting:
For rooting your J5 on Android 6.0 as well as Android 5.1.1 follow these steps.
1. Download the TWRP recovery from the link below.
Android 5.1.1 (Lollipop) ( Thanks @Nick Verse for TWRP recovery)
http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j5-t3338869
Android 6.0 (Marshmallow) (Thanks @ganesh varma for TWRP recovery)
http://forum.xda-developers.com/android/development/recovery-samsung-galaxy-j500f-t3416960
2. Download Supersu zip from the link below
https://download.chainfire.eu/696/supersu/
For Marshmallow Users if you are facing bootloop after flashing supersu.zip . Flash the supersu file given in the link below.
https://mega.nz/#!zNVBhKjb!FZFKq6vaIPudYMoIajb-3zwuLOC26OHtdYY_TKt-6Qs (Thanks @jka_dark28 for link)
3. Now flash downloaded TWRP via Odin. (Follow the same process to Flash)
4. Transfer supersu zip file to your sd card.
5. After flashing TWRP. Reboot to recovery by pressing and holding Volume Up + Home + Power Button.
6. Now in TWRP select install, locate your Supersu zip file and flash it.
7. Than reboot your device. Congratulation you have rooted your device.
Note: Flashing TWRP and Supersu will void your warranty. So think before you flash. After flashing
TWRP do a nandroid backup first before flashing anything (even supersu file) so that if anything
goes wrong you can restore back.
And most important do everything on your own risk. I will not be responsible to any damage made to your device. But if you follow the process carefully you will not face any problem.
Hope this tutorial will help you all who don't have idea about these things.
Do write your comments and Hit thanks if it helped you.:laugh::good:
thanks for the tutorial!
testing
FOR MM
Wipe data factory reset in LL
Flash done : J500MUBU1BPF3_J500MZTO1BPF2_J500MUBU1BPF2_HOME.tar
Device does not have drk please install drk first ( knox counter =01 ), reboot.
after 15 min device start.
- TWR Working
- Root not workin on MM J500MUBU1BPF3_J500MZTO1BPF2_J500MUBU1BPF2_HOME.tar (Brazil) use this:
https://mega.nz/#!zNVBhKjb!FZFKq6vaIPudYMoIajb-3zwuLOC26OHtdYY_TKt-6Qs
- For Xposed framework use xposed-v86.0-sdk23-arm-custom-build-by-wanam-20160709:
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
What did you tried to flash? Is it MM or LL Firmware? And thanx for xposed and root file link.
Does this work on SM-J500F/DS? Its basically a normal J5 but with dual sim but I wanna be sure.
ZemoDroid said:
Does this work on SM-J500F/DS? Its basically a normal J5 but with dual sim but I wanna be sure.
Click to expand...
Click to collapse
What are you trying to? Upgrade to MM or downgrade to LL. And yes you can flash the firmware of J500F.
rjrulz007 said:
What are you trying to? Upgrade to MM or downgrade to LL. And yes you can flash the firmware of J500F.
Click to expand...
Click to collapse
I'm trying to root it.
Just flash twrp via odin. And install supersu zip via twrp. And remember it will void your warranty. One more thing do a nandroid backup before flashing anything.
Do I need to unlock bootloader before flashing twrp.? If it is required how can I do it on Samsung galaxy J500H running marshmallow 6.0.1?
Thank you
Whatisausername said:
Do I need to unlock bootloader before flashing twrp.? If it is required how can I do it on Samsung galaxy J500H running marshmallow 6.0.1?
Thank you
Click to expand...
Click to collapse
You have to enable USB debugging on your Galaxy J5 and OEM unlocking by going into developer Options. To enable developer option go to system, About Phone, and tap Build number 5/6 times. Let me know if you need more help.
.yeah it helped but my phone is stuck at samsung.
Whatisausername said:
I did both however my phone simply does not boot into twrp.. Odin said passed and knox is tripped.
Click to expand...
Click to collapse
Untick the Auto Reboot from the options in Odin and flash the recovery. After flashing finishes,power off the device(by removing battery) and hold [ VOLUME UP+HOME+POWER] to enter into the recovery and swipe to 'allow modifications'. Hope This will help you.
Whatisausername said:
.yeah it helped but my phone is stuck at samsung.
Click to expand...
Click to collapse
Did you flashed anything after installing TWRP recovery, like any zip files?
rjrulz007 said:
Did you flashed anything after installing TWRP recovery, like any zip files?
Click to expand...
Click to collapse
Yeah update-superuser.zip
Edit: flashed stock rom ie 5.1.1 via odin and updating to 6.0.1 will try second file.
Whatisausername said:
Yeah update-superuser.zip
Edit: flashed stock rom ie 5.1.1 via odin and updating to 6.0.1 will try second file.
Click to expand...
Click to collapse
rjrulz007 said:
Did you flashed anything after installing TWRP recovery, like any zip files?
Click to expand...
Click to collapse
OK well which partitions should i backup?
Works great, Thanks
Downgrade
Hi All!
If I want to downgrade from 6.0.1 to 5.1.1 via Odin, is it sure, that I need only one AP/PDA file from firmware sites?
Because I remember with an older phone, that if I need to downgrade, it need the other files too - Bootloader, Phone, CSC.
Is it sure that there is no need for them? If it, where can I download them?
Thanks!
Hello mate, I have gone back and forward from LP - MM a number of times.
I have had no problem with it as all.
I just flashed the firmware from from Sam mobile ( there are lots us links through out the ROMs thread)
I have only had to put the file into the AP and flashed no problem.
Just mage sure that the firmware is the correct one for your model
Sent from my Galaxy J5 using XDA Labs
Hey, I have a SM J500F 6.0.1, can I root it the same way as an 6.0 or do I have tobdo anything diferent??
I Suggest that if your device won't pass Samsung logo, put it in recovery mode and Factory Reset.
I Had that issue and i solved it doing that.:fingers-crossed:
Do I need stock recovery to only root my J5?? And will I lose all my data if I root it??
Related
I am not a developer at all , just got a working method from different web sources. so i think posting this method will help all A5 users. hope it helps you ...
Note: This Method Will Set Your KNOX Status As 0x1 , That Means Your Warranty Will Be Void Forever.
Download Links For CF-Auto-Root Packages:
CF-Auto-Root Package For A5 SM 5000
CF-Auto-Root Package For A5 SM 5009
CF-Auto-Root Package For A5 SM 500F
CF-Auto-Root Package For A5 SM 500FU
CF-Auto-Root Package For A5 SM 500G
CF-Auto-Root Package For A5 SM 500H
CF-Auto-Root Package For A5 SM 500K
CF-Auto-Root Package For A5 SM 500L
CF-Auto-Root Package For A5 SM 500M
CF-Auto-Root Package For A5 SM 500S
CF-Auto-Root Package For A5 SM 500Y
CF-Auto-Root Package For A5 SM 500YZ
Download Links For Other Tools:
Flashify Premuim
Samsung Android USB Driver for Windows
ODIN 3.10
Download Links For Firmwares:
Firmware Source 1
Firmware Source 2
Root Process:
Step 1: So A5 has many variants under it and so i have provided chain fire root kit for all of them, so choose the kit as per your device model and download it on your PC. Once downloaded you have to create a folder named A5 on desktop and extract the contents of the downloaded zip file inside it.
Step 2 : After you do the above step now you have to download the famous Odin for A5 which will utilize the above kit and root your A5 .
Step 3 : Now we need our device in download mode so to do that turn off your A5 and then press home button along with the power button and the down button of volume all of them together until the mode loads up.
When mode loads up you have to use the USB cable to connect the device to PC.
Step 4 : Now when you open the Odin software which you just now installed on your computer, you will see a message saying added which means that A5 is added to Odin.
Step 5 : Once added you will see a button on which PDA/AP is written which upon clicking you have to select a file named .tar.md5 from the extracted folder which you kept on desktop.
Step 6 :After you do that, you will have to for sure follow this point before hitting start so click on F.Reset time and Auto reboot options and then you can click start.
Step 7 : When you hit start the Odin by using the root kit files, will root your device and will take around 2 – 3 minutes may be less then that to complete its process and when it is done successfully then it will show a message saying PASS which means the root access has been achieved on A5 , If Failed Follow Below Steps
Here is a problem , If ODIN saying RESET then your device will be rebooted and rooted successfully but it already destroyed boot.img and recovery.img . don't worry we are going to solve this issue with some simple steps. Download Falshify from above links and install after that download firmware for your device from above links then rename the Firmware_File_Name.tar.md5 to Firmware_File_Name.tar then open it using winrar and extract boot.img , recovery.img then copy it to your device storage and flash both of them using Flashify . don't reboot after flashing one image,flash both image then reboot.
You Have Root On Your Samsung Galaxy A5 ,Whatever It KitKat Or Lollipop.
Credits To: bestandroidrootedapps and mygalaxya (xda user)
has anyone tried this
you can try this ...
Didn't work on my A5 A500M on Android Lollipop 5.0.2
What can I do? I followed all steps and did also the last one, because ODIN said RESET after flashing the root file. And after extracting and flashing the both .img files my cellphone didn't boot the system, it just went into the recovery when I tried to boot it normally. So I flash the firmware again with ODIN.
I just want to know:
1) What really happens when ODIN says RESET after flashing a file? You said that at that point the files "recovery.img" and "boot.img" are destroyed. What do you really mean with that? Are they deleted from the cellphone?
2) Mean this that the cellphone won't boot anymore if turn it off and then try to turn it on again?
3) What would happen if I flash the Root file and ODIN says RESET after flashing but I don't flash the both .img files? Would my cellphone work normally or not?
Thank you very much and sorry for so many questions, I'm kind of new to this!
Why make a topic about this ? Its just ChainFire-Autoroot.
Anyway, ChainFire is boss
zat0x said:
Why make a topic about this ? Its just ChainFire-Autoroot.
Anyway, ChainFire is boss
Click to expand...
Click to collapse
Everyone not like you and me here .... and everyone not known about Chainfire and i know he is boss
I tried this. It doesnot work for SM-A500L on Lolipop.
AaronZar said:
What can I do? I followed all steps and did also the last one, because ODIN said RESET after flashing the root file. And after extracting and flashing the both .img files my cellphone didn't boot the system, it just went into the recovery when I tried to boot it normally. So I flash the firmware again with ODIN.
I just want to know:
1) What really happens when ODIN says RESET after flashing a file? You said that at that point the files "recovery.img" and "boot.img" are destroyed. What do you really mean with that? Are they deleted from the cellphone?
2) Mean this that the cellphone won't boot anymore if turn it off and then try to turn it on again?
3) What would happen if I flash the Root file and ODIN says RESET after flashing but I don't flash the both .img files? Would my cellphone work normally or not?
Thank you very much and sorry for so many questions, I'm kind of new to this!
Click to expand...
Click to collapse
Good questions mate. I would like to know there answers. These lines " at that point the files "recovery.img" and "boot.img" are destroyed" seems scary to me.
So; no answers here by the OP, and it worked for nobody...
Any idea to root this phone?
hey, how do i find out the rom version to download? do i have to look at the baseband version or build number?
hi i have done all steps and that fucng phone still do soft reset...
pls help
Damned it…...
I did it. But totally misunderstood step "nr 6 F.Reset time and Auto reboot options and then you can click start."
What do i do now??? The phone starts but i need to rebbot every time.
When it starts its a black screen...
But i can still turn it of.
towelroot
does anyone know if towelroot does trip knox ? because it's a nice alternative ...
My A5 always back to odin mode (Download Mode)
Haii.. thanks for the article,
but iam have a some problem.
I pass on point 7, but my android cannot be play, an return to odin back..
If i restart / hard reset to, my android always back to odin mode (download mode)
can you solve my problem ??
grongobar said:
does anyone know if towelroot does trip knox ? because it's a nice alternative ...
Click to expand...
Click to collapse
Welcome back to the 21st century.
Galaxy A5 (SM-A500H) error
Samsung A500H returns "Could not do normal boot"
Hi, I have successfully rooted 5.0.2 rom on galaxy grand prime with cm autoroot for kit kat.
1. flash new 5.0.2 update with odin (if you had root on kit kat flash 2 times, it wont work first time) http://www.sammobile.com/firmwares/download/54047/G530FZXXU1BOG2_G530FZOXA1BOG2_PHE/
2. boot 5.0.2 set up google account and install super su
3. download flash cm autoroot https://download.chainfire.eu/664/CF-Root1/CF-Auto-Root-fortunalte-fortunaltedx-smg530f.zip?retrieve_file=1
4. boot again - phone will reboot 3 times before booting into system and updating super su, launch and set up super su
5. download recovery.zip, extract and flash it, WARNING use this recovery only with G530FZXXU1BOG2_G530FZOXA1BOG2_PHE, it is extracted from this rom and it should fix boot loop after flashing the cm autoroot package
6. reboot and you have rooted lollipop on G530FZ
MAKE SHURE YOU FLASH recovery from step no 5 otherwise you will end up in boot loop
p.s. I am now working on xposed installer
It worked. Thank you very much
Thank you it works !
Done, but i do not had to flash the recovery, the device has not entered bootloop
Same question as always: and knox? Is trigered right?
Edit: nevermind. I already have my answer.
zapetino said:
Done, but i do not had to flash the recovery, the device has not entered bootloop
Click to expand...
Click to collapse
can you enter recovery?
After this wonderfull root, do you know if an working xposed exist ?
PS: After flashing i think knox is triggerded (i trigered my knox when i flashed root in 4.4.4). Only Kingroot didn't triggered root.
hangy18 said:
can you enter recovery?
Click to expand...
Click to collapse
You were right, after another reboot the device was stuck in bootloop and i had to flash your recovery
zapetino said:
You were right, after another reboot the device was stuck in bootloop and i had to flash your recovery
Click to expand...
Click to collapse
how i flash this autoroot? via recovery or how?
Crimmy20 said:
how i flash this autoroot? via recovery or how?
Click to expand...
Click to collapse
Via ODIN
dcduartee said:
Via ODIN
Click to expand...
Click to collapse
and where i put this autoroot and recovery on odin? like witch section
Crimmy20 said:
and where i put this autoroot and recovery on odin? like witch section
Click to expand...
Click to collapse
PDA on older versions of odin or AP if you are using a newer version of odin
work on G530H?
It worked, and when you reboot the phone stopped working. When you try to run stands in the picture and nothing happens. Install recovery again by Odin, but nothing helps. Any ideas? (Sorry for the language, I have a translator)
hey guys does this method work on g530h ???
if not, can any1 link me to a guide to root my g530h i've been searching for 2 days plz hlp
Hey, it seems like I've got a problem, when I try to update SuperSU it fails :/
Did I do something wrong ?
hey can u plz tell me how did u extract the stock recovery from the rom i need it plz
Sent from my SM-G530H using Tapatalk
Yeh..how would one extract the stock recovery from the (.md5) file..is that possible.? or does one download the stock recovery (.img) file somewhere.?
sent by my: SM-G531M Grand Prime
(Lollipop 5.1.1)
I have this:
Model SM-G530FZ
Model name GALAXY Grand Prime
Country Spain
Version Android 5.0.2
Changelist 816937
Build date Thu, 17 Sep 2015 05:21:41 +0000
Product code PHE
PDA G530FZXXU1BOI2
CSC G530FZOXA1BOI2
Do I have to Flash the previous G530FZOXA1BOG2? Or can I skip this step and flash the autoroot directly? Would work the Recovery with my current version?
Just downloaded and installed Kingroot app...works fine
FOR SAMSUNG GALAXY ALPHA G850F
For anyone who doesn't want to download the whole stock firmware or is using a custom ROM and hasn't update baseband/modem in a while or want to go back to stock recovery here are the latest Modem & (Stock) Recovery files taken from G850FXXU2CPG1_G850FOXE2CPG1_G850FXXU1CPC1 firmware
Download Modem : https://goo.gl/5Yr1Dr
Download Recovery: https://goo.gl/y1O3WM
To flash modem:
1. Download Odin here https://goo.gl/wL8LFs
2. Open Odin and click on CP and find the modem.bin file (wait until it says Added then countinue to 3)
3. Put your phone in Download Mode
4. Connect it via a USB cable with your pc
5. Click Start
6. Wait until your phone is booted.
Done !
To flash recovery (the way I do it )(You must have root):
1. Get the Flashify APP here : https://goo.gl/aQqYGa
2. Open Flashify and select "Recovery Image" under Flash
3. Find your recovery.img file, click ok and flash it
4. Wait for it to finish
Done !
Thanks.
Please Help me!
Why isn't working on my phone? I follow all the instructions, Odin install all perfectly but keep doing boot loops
I've flashed modem but LineageOS still isn't detecting my sim card.
Amazing, thank you! Downloading >1GB from cheapy download sites like rapidgator capped at ~30KB/s with flaky wifi is impossible for me.
ty
DurimKlaiqi said:
FOR SAMSUNG GALAXY ALPHA G850F
here are the latest Modem & (Stock) Recovery files taken from G850FXXU2CPG1_G850FOXE2CPG1_G850FXXU1CPC1 firmware
Click to expand...
Click to collapse
I suppose the baseband (CP) version you have attached is G850FXXU1CPC1
I have version G850FXXU1COJ5 and can't update - Odin can't flash, no details for the error, just failed 1. The full name of the ROM I had flashed is
G850FXXS2CQA2_G850FOLB2COJ1_G850FXXU1COJ5_HOME.tar.md5
and previously I had used
G850FXXU2COK6_G850FOLB2COJ1_G850FXXU1COJ5_HOME.tar.md5
which seem to have same baseband.
Why can't I update the baseband?
Thank you
Hi,
I am trying to flash newer baseband from what I have: G850FXXU1COJ5
I tried but failed with flashing through odin of the following two:
G850FXXU2COK6.bin
G850FXXU1CPC1.bin
Perhaps I am making a mistake in flashing it, but I am not aware which is newer or what is the difference between these two U2 COK6 and U1 CPC1
U2 > U1, but COK6 < CPC1, so which one is newer?
Thanks
Hello! I have a Network problem with my Galaxy S6 SM-G920T, I need a Modem for my Galaxy. The Baseband Version is: G920TUVS6FRC1. Help me please!
Markpetit92 said:
Hello! I have a Network problem with my Galaxy S6 SM-G920T, I need a Modem for my Galaxy. The Baseband Version is: G920TUVS6FRC1. Help me please!
Click to expand...
Click to collapse
https://www.sammobile.com/firmwares/galaxy-s6/SM-G920T/
Here we have root for stock rom Thanks to the Chainfire Team.
Everything done by them so all thanks and credits are for them
Download
https://download.chainfire.eu/1036/CF-Root/CF-Auto-Root/CF-Auto-Root-on7xelte-on7xeltedd-smg610f.zip
Installation
-Enable USB debugging and OEM unlocking in the settings
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue
-Flash the CF-Auto-Root package as AP in ODIN(Comes within the zip file), and your device should reboot into a modified recovery (signified by a large red Android logo) and it will install SuperSU for you and restore the stock recovery, and reboot back into Android.
I tested it on my device and it worked normally
I will not be responsible for any damage to your device, but following the steps will normally work normally
I just tested with ROM stock 6.0.1 with security patch from 1 July 2017
.
Great work
تم الإرسال من SM-G610F باستخدام Tapatalk
It. Really. Works.
Broooooo... Thanks!!!
edit: had to create an account just to say thank you xD
Hayleyw2 said:
Here we have root for stock rom Thanks to the Chainfire Team.
Everything done by them so all thanks and credits are for them
Download
https://download.chainfire.eu/1036/CF-Root/CF-Auto-Root/CF-Auto-Root-on7xelte-on7xeltedd-smg610f.zip
Installation
-Enable USB debugging and OEM unlocking in the settings
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue
-Flash the CF-Auto-Root package as AP in ODIN(Comes within the zip file), and your device should reboot into a modified recovery (signified by a large red Android logo) and it will install SuperSU for you and restore the stock recovery, and reboot back into Android.
I tested it on my device and it worked normally
I will not be responsible for any damage to your device, but following the steps will normally work normally
I just tested with ROM stock 6.0.1 with security patch from 1 July 2017
.
Click to expand...
Click to collapse
Do you have working twrp for g610y model?
Sent from my SM-G955F using Tapatalk
phonglhie said:
Do you have working twrp for g610y model?
Click to expand...
Click to collapse
Yep, since early June.
https://forum.xda-developers.com/ga...ecovery-twrp-3-1-1-1-galaxy-j7-prime-t3617377
does this wipe data?
and is it working on sm-j710f/ds?
Nice work THX bro.
thanks to this i hate j7 prime stock rom have issue with wifi keep disconnecting
epiphany74721 said:
thanks to this i hate j7 prime stock rom have issue with wifi keep disconnecting
Click to expand...
Click to collapse
Try the app below, worked well for me when I had similar issues on another Samsung tablet. Have also seen reports of it working for others.
https://play.google.com/store/apps/details?id=org.wahtod.wififixer
Is this guaranteed to work on SM-G610Y as well? The link says the file is for SM-G610F.
Me I know sir if g610f autoroot.. Compatible in g610y..as stated above.. Ty
please g610f android 7 root
J7 prime 106F
Will this work on android OS upgraded to v 7. Android noughat ?
Odin Can't detect my phone what should i do? SM-G610F
Varification failed! I have to reset my phone!
after you stupid ****ing ****y method. my phone boots and i got "varification failed" screen now it tells me to reset the phone.
can i restore it?
hey please tell me can i restore my device to previous state after doing your auto root because i saw it was making some backup so can i restore whatever it changes to my device?
device - sm-g610f/dd
emergency network done by g610 cf auto root file allways by support us thnx to all xda member thx to all
How about sm-g610y
Security level oct. 1 2016
Thnks.
this erased my data and didnt work you soab
g610f android 7 root
hi!
please set g610f root file(G610FDDU1BQJ7)
those root file cant working in new security level:crying:
and i see verification error after install supersu and reboot
is there a custom rom SM-A107f ?
and how to install TWRP recovery on SM-A107f?
-No
-And does not exist yet from what I can tell.
ShaDisNX255 said:
-No
-And does not exist yet from what I can tell.
Click to expand...
Click to collapse
thats a sad news
Consider this
ddiv1de said:
thats a sad news
Click to expand...
Click to collapse
Have you tried gsi roms? for more information head over to geektoandroid.com i hope this helps
Infant9099 said:
Have you tried gsi roms? for more information head over to geektoandroid.com i hope this helps
Click to expand...
Click to collapse
I've tried a couple, none have booted for me.
GSI Treble rom
ShaDisNX255 said:
I've tried a couple, none have booted for me.
Click to expand...
Click to collapse
I currently have a Samsung galaxy A105F/DS-U3 and it supports treble and seamless update - a/b. I have searched and it has lineageOS , Paranoid android and ViperOS. I'm gonna try LineageOS 17.0 - which gives me Anddroid Q. I'll let you know if i find one for you.
Infant9099 said:
I currently have a Samsung galaxy A105F/DS-U3 and it supports treble and seamless update - a/b. I have searched and it has lineageOS , Paranoid android and ViperOS. I'm gonna try LineageOS 17.0 - which gives me Anddroid Q. I'll let you know if i find one for you.
Click to expand...
Click to collapse
You have the A10, which is a bit different than the A10s so it is most likely that any GSI that boots to your phone will not boot for mine. Besides, A10s does not have TWRP yet and A10 does
Infant9099 said:
I currently have a Samsung galaxy A105F/DS-U3 and it supports treble and seamless update - a/b. I have searched and it has lineageOS , Paranoid android and ViperOS. I'm gonna try LineageOS 17.0 - which gives me Anddroid Q. I'll let you know if i find one for you.
Click to expand...
Click to collapse
any luck pal?
Infant9099 said:
I currently have a Samsung galaxy A105F/DS-U3 and it supports treble and seamless update - a/b. I have searched and it has lineageOS , Paranoid android and ViperOS. I'm gonna try LineageOS 17.0 - which gives me Anddroid Q. I'll let you know if i find one for you.
Click to expand...
Click to collapse
any luck pal?
Can A107F (A10s) be rooted?
Rootthegalaxy said:
Can A107F (A10s) be rooted?
Click to expand...
Click to collapse
Yes.
how to root SM-A107f Samsung Galaxy A10s
ShaDisNX255 said:
Yes.
Click to expand...
Click to collapse
so this is what i did to root my A10s.
1. check what binary your phone is running I already updated mine so my phone is on Android 10 binary 6.
how to check your binary - goto setings-about phone-software info, check Baseband version so on my phone its A107FXXU6BTES the U6 indicates your binary some has U3 binary 3 or U5, S5 binary 5
once you determined your binary.
2. activate DEVELOPER OPTIONS then activate OEM UNLOCK
samfw.com/firmware/SM-A107F/XTC/A107FXXU6BTF
go to this website and download the appropriate firmware.
each will contain a BL, AP, CP, and Home_CSC.
3. once finished downloading unlock your bootloader just boot to download mode then there is an option to press and HOLD VOLUME UP to unlock bootloader then press volume up again. if it didn't reboot instantly press and hold volume up and down again just do it again until when you choose to unlockbootloader it will reboot instatly.
4. after unlocking bootloader just go through the entire process of setting up your phone keep the bootloader unlock, INSTALL Magisk manager, so yeah install magisk choose patch image then from your downloaded firmware remove the "MD5" at the end of the files so it will be AP_A107F.tar then choose the AP to patch hrough magisk
5. after patching copy the patched file to your PC extract it by WINRAR get the boot.img if its boot.img.lz4 it means patch was not sucessful
6. after getting the boot.img copy it to your phone again and patch again make sure to rename it boot.img from inside the generated patch file then compress it as TAR using 7zip
7. flash it through odin on AP section and there your magisk rooted.
sorry for the long post
nyxl said:
how to root SM-A107f Samsung Galaxy A10s
so this is what i did to root my A10s.
1. check what binary your phone is running I already updated mine so my phone is on Android 10 binary 6.
how to check your binary - goto setings-about phone-software info, check Baseband version so on my phone its A107FXXU6BTES the U6 indicates your binary some has U3 binary 3 or U5, S5 binary 5
once you determined your binary.
2. activate DEVELOPER OPTIONS then activate OEM UNLOCK
samfw.com/firmware/SM-A107F/XTC/A107FXXU6BTF
go to this website and download the appropriate firmware.
each will contain a BL, AP, CP, and Home_CSC.
3. once finished downloading unlock your bootloader just boot to download mode then there is an option to press and HOLD VOLUME UP to unlock bootloader then press volume up again. if it didn't reboot instantly press and hold volume up and down again just do it again until when you choose to unlockbootloader it will reboot instatly.
4. after unlocking bootloader just go through the entire process of setting up your phone keep the bootloader unlock, INSTALL Magisk manager, so yeah install magisk choose patch image then from your downloaded firmware remove the "MD5" at the end of the files so it will be AP_A107F.tar then choose the AP to patch hrough magisk
5. after patching copy the patched file to your PC extract it by WINRAR get the boot.img if its boot.img.lz4 it means patch was not sucessful
6. after getting the boot.img copy it to your phone again and patch again make sure to rename it boot.img from inside the generated patch file then compress it as TAR using 7zip
7. flash it through odin on AP section and there your magisk rooted.
sorry for the long post
Click to expand...
Click to collapse
HOW THA?
it worked guy
thank yu guy
I hope that you maybe able to help me as my bootloader will not load
1 The OEM UNLOCK is on
2 Have pressed buttons as instructions but the phone just switches of
guyz that they dont know how to write magisk patch with odin
i had same problem that when i started to writing i got a failed error
if your bootloader is unlocked and yu renamed patched.img to boot.img
but yu got error do this :
change your frimware
if your a10s frimware is
A107FU5ATA9 it dosent support any root . change your frimware to a107fxxs5asl3
now start patching magisk !
Mirloo_HK said:
guyz that they dont know how to write magisk patch with odin
i had same problem that when i started to writing i got a failed error
if your bootloader is unlocked and yu renamed patched.img to boot.img
but yu got error do this :
change your frimware
if your a10s frimware is
A107FU5ATA9 it dosent support any root . change your frimware to a107fxxs5asl3
now start patching magisk !
Click to expand...
Click to collapse
Hi '''Mirloo''''About rooting the (Samsung Galaxy 10s SM-A107f) I have tried most of the rooting akps with no luck (cfautoroot I have not tried yet)'''''''As for using Odin & magisk I am getting so many different instructions from different posts
1 unlock the bootloader This I have done successfully
The next steps using Magisk & Odin Start to get misleading
one site says Copy the AP to your phone and patch it where another site says says change the format of the AP file to tar by deleting .mds then copy it to your phone
I seem to get confused now as what to do next ''''Please could you give me full instructions ....Thank you
I have attempted to patch boot.img around 7 times unsuccessfully, I have the SM-A107F, can someone please send me the correctly patched boot image for my device, will be much appreciated.
i have this device, SM-A107F/DS, still no custom rom? is it possible to install lineage os?
fatdog1 said:
i have this device, SM-A107F/DS, still no custom rom? is it possible to install lineage os?
Click to expand...
Click to collapse
I'm also waiting for this. Tried flashing twrp recovery using odin but I failed. The error says "only official binaries are allowed to be flashed" tried flashing the original firmware but same error. Wondering why.