Hello everyone,
Firstly, I would like to apologize if this question has been answered before, I simply cannot find the answer for it. So I am currently rooted on 5.1.1 with, (according to the About Device section of my phone)
Kernel version:
3.10.61-S6_Unikernel_v9-0000initial
[email protected] #1
Thu Sep 10 19:10:19 BST 2015
Build Number: XtreStoLite Deo Mod v.2.4 - XXU3COI9
According to my model number, it says my model number is SM-G925K, but my original build number was SM-G925W8.
Also, I am using TWRP recovery
So like I have started in the title, I would like to update to 6.0.1 stock, and then root it and install a custom rom. I have bought my phone from Rogers, and am on a 2 year contract with them.
I am COMPLETE noob when it comes to this, so anything to help is appreciated, I recently switched from iPhone to Android
EDIT #1: I am only asking this question because my carrier has not rolled out the firmware yet, and I am not on stock firmware anymore so I was wondering if it was possible to update, I don't want to end up with a bricked device
RandomUsername02 said:
Hello everyone,
Firstly, I would like to apologize if this question has been answered before, I simply cannot find the answer for it. So I am currently rooted on 5.1.1 with, (according to the About Device section of my phone)
Kernel version:
3.10.61-S6_Unikernel_v9-0000initial
[email protected] #1
Thu Sep 10 19:10:19 BST 2015
Build Number: XtreStoLite Deo Mod v.2.4 - XXU3COI9
According to my model number, it says my model number is SM-G925K, but my original build number was SM-G925W8.
Also, I am using TWRP recovery
So like I have started in the title, I would like to update to 6.0.1 stock, and then root it and install a custom rom. I have bought my phone from Rogers, and am on a 2 year contract with them.
I am COMPLETE noob when it comes to this, so anything to help is appreciated, I recently switched from iPhone to Android
EDIT #1: I am only asking this question because my carrier has not rolled out the firmware yet, and I am not on stock firmware anymore so I was wondering if it was possible to update, I don't want to end up with a bricked device
Click to expand...
Click to collapse
First Download samsung smartswitch And restore Ur Device to factory Defaults It will wipe ur phone so backup ur files and it will install lastest frimware avilable which 6.0.1 after that u can root ur phone by flashing cf-auto-root and twrp after that u can install ur custom rom
I hope it helps you if u have any further question hit me up
osman34 said:
First Download samsung smartswitch And restore Ur Device to factory Defaults It will wipe ur phone so backup ur files and it will install lastest frimware avilable which 6.0.1 after that u can root ur phone by flashing cf-auto-root and twrp after that u can install ur custom rom
I hope it helps you if u have any further question hit me up
Click to expand...
Click to collapse
Okay so instead of updating via smartswitch, I downloaded the firmware via a website (not sure if I am able to mention it here, but I won't anyway) for my model (SM-G925W8) and flashed it via Odin. Then I rooted via CF-AutoRoot by Chainfire, and am currently installing Xtrestolite 3.3.1
RandomUsername02 said:
Okay so instead of updating via smartswitch, I downloaded the firmware via a website (not sure if I am able to mention it here, but I won't anyway) for my model (SM-G925W8) and flashed it via Odin. Then I rooted via CF-AutoRoot by Chainfire, and am currently installing Xtrestolite 3.3.1
Click to expand...
Click to collapse
ok Cool am Glad U made it xD
osman34 said:
ok Cool am Glad U made it xD
Click to expand...
Click to collapse
What are custom kernels? Do I need one? What is SELinux and should it be Permissive or Enforcing?
RandomUsername02 said:
What are custom kernels? Do I need one? What is SELinux and should it be Permissive or Enforcing?
Click to expand...
Click to collapse
SELinux is a set of kernel modifications and user-space tools
u dont need custom kernel as my opinion
custom kernels with comes Permissive
and official kernels comes with enforcing
osman34 said:
SELinux is a set of kernel modifications and user-space tools
u dont need custom kernel as my opinion
custom kernels with comes Permissive
and official kernels comes with enforcing
Click to expand...
Click to collapse
I don't know if this is significant, but the reason I asked about SELinux is because when I open TWRP manager and it tells me my TWRP version, it says Please set SELinux to Permissive in order to view this
Related
hi guys i just got a Samsung Galaxy fame lite GT-S6790N , and i tried a lot of things but cannot root , install cwm or costum rom .
It has jelly bean 4.1.2 installed and it is laggy as hell it is very slow so thats why i want to change the rom , so please any suggestions links or tutorials ... i tried Root_with_Restore_by_Bin4ry_v33 and some other root methods but doesn't work idk what to do because can't find any other root , cwm , rom , tutorial
more info about my phone :
Samsung Galaxy fame lite GT-S6790N
current version : Jelly bean 4.1.2
Baseband version : S6790NXXAMJ1
kernel version : 3.0.15-1496475
[email protected]#1
Fri Dec 20 13:33:53 KST 2013
Build Number : JZO54K.S6790NXXAML2
THANK FOR ANY HELP
ltoptic said:
hi guys i just got a Samsung Galaxy fame lite GT-S6790N , and i tried a lot of things but cannot root , install cwm or costum rom .
It has jelly bean 4.1.2 installed and it is laggy as hell it is very slow so thats why i want to change the rom , so please any suggestions links or tutorials ... i tried Root_with_Restore_by_Bin4ry_v33 and some other root methods but doesn't work idk what to do because can't find any other root , cwm , rom , tutorial
more info about my phone :
Samsung Galaxy fame lite GT-S6790N
current version : Jelly bean 4.1.2
Baseband version : S6790NXXAMJ1
kernel version : 3.0.15-1496475
[email protected]#1
Fri Dec 20 13:33:53 KST 2013
Build Number : JZO54K.S6790NXXAML2
THANK FOR ANY HELP
Click to expand...
Click to collapse
Have you tried using towelroot yet?
shimp208 said:
Have you tried using towelroot yet?
Click to expand...
Click to collapse
yeah i have it says device not supported or something like that
ltoptic said:
yeah i have it says device not supported or something like that
Click to expand...
Click to collapse
Did you try changing the mod strings in towel root to fit your device?
shimp208 said:
Did you try changing the mod strings in towel root to fit your device?
Click to expand...
Click to collapse
no i didn't try and i don't know how to do it can you do it for me and tell me how to install it ?
ok i did that string after pressing make it rain phone restarted ? rootchecker shows that i am rooted but
i cannot install cwm or twrp ??
ltoptic said:
no i didn't try and i don't know how to do it can you do it for me and tell me how to install it ?
ok i did that string after pressing make it rain phone restarted ? rootchecker shows that i am rooted but
i cannot install cwm or twrp ??
Click to expand...
Click to collapse
Glad you could get rooted, is there a CWM or TWRP recovery image available for your device? If there isn't one available you may have to compile it yourself using this guide. What are you currently using to try and install recovery?
shimp208 said:
Glad you could get rooted, is there a CWM or TWRP recovery image available for your device? If there isn't one available you may have to compile it yourself using this guide. What are you currently using to try and install recovery?
Click to expand...
Click to collapse
My phone is very slow and laggy i thought you guys have any good fast stable rom for my phone . I don't have ubuntu and really this stuff isn't that easy lol but still if you could do this compile for me would be great . thanks for any help
ltoptic said:
My phone is very slow and laggy i thought you guys have any good fast stable rom for my phone . I don't have ubuntu and really this stuff isn't that easy lol but still if you could do this compile for me would be great . thanks for any help
Click to expand...
Click to collapse
For any ROMs you would need a custom recovery. Unfortunately as the winter is my busiest time at school, I won't have time to compile a recovery for you until at least the end of March. However if you send me your stock recovery.img and stock boot.img I will see if I have time earlier.
shimp208 said:
For any ROMs you would need a custom recovery. Unfortunately as the winter is my busiest time at school, I won't have time to compile a recovery for you until at least the end of March. However if you send me your stock recovery.img and stock boot.img I will see if I have time earlier.
Click to expand...
Click to collapse
ok tell me how to do that , do you need any backup or something from my phone or just the original stock img from my phone ?
ltoptic said:
ok tell me how to do that , do you need any backup or something from my phone or just the original stock img from my phone ?
Click to expand...
Click to collapse
I just need the original boot.img and stock recovery.img for your phone, you can use either terminal emulator or adb shell to dump those. Let me know if you need more detailed instructions.
shimp208 said:
I just need the original boot.img and stock recovery.img for your phone, you can use either terminal emulator or adb shell to dump those. Let me know if you need more detailed instructions.
Click to expand...
Click to collapse
i have the stock recovery , cuz i try to install every cmw or twrp and it brick my phone so i use odin to recover my recovery mode, this is the download link for my stock rom http://www.nextwap.net/down-firmware/7513/samsung-galaxy-fame-lite-gt--s6790n.html
just tell me how to make that dump
Q&A for Galaxy V SM-G313HZ Development Thread
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Galaxy V SM-G313HZ Development Thread. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Samsung galaxy v (sm-g313hz)
Guys please infform me if we have a cyanogenmod for our device .. bec. Im a big fan of CYANOGEN MOD . I want to change my stock rom to CM12 But i cant saw any compatible cyanogenmod for our device .. please help i want cyanogen for sgv .. thanks .. my device already running nemoid rom v1.1 but it does have too many bugs .. thanks please help
ear piece problem
Hi boss
Thanks for your wonderfull work
Please I have updated my galaxy v sm-G313HZ and my ear piece cease working, anytime I want to make call have to use speaker out before I can make call. Please help me
we might be needing a new unlocked bootloader for samsung galaxy V. I bet your phone updated on your first use or maybe the newer samsung galaxy vivalto got modded firmware versions thats why all roots are not working right now.
Here's the white screen of death upon recovery if the developers want to see.
luckily I got a stock rom so everytime I test a root and failed, I just flash the stock and it works again.
galaxyV
allaiza10 said:
we might be needing a new unlocked bootloader for samsung galaxy V. I bet your phone updated on your first use or maybe the newer samsung galaxy vivalto got modded firmware versions thats why all roots are not working right now.
Here's the white screen of death upon recovery if the developers want to see.
luckily I got a stock rom so everytime I test a root and failed, I just flash the stock and it works again.
Click to expand...
Click to collapse
i got same problem too T.T, i try to instalng some stock CMWrecovery or TRWP but still white screen problem
sorry for the late respons
seyramob said:
Hi boss
Thanks for your wonderfull work
Please I have updated my galaxy v sm-G313HZ and my ear piece cease working, anytime I want to make call have to use speaker out before I can make call. Please help me
Click to expand...
Click to collapse
have u try to flashing stockrom firmware thru odin ?
allaiza10 said:
we might be needing a new unlocked bootloader for samsung galaxy V. I bet your phone updated on your first use or maybe the newer samsung galaxy vivalto got modded firmware versions thats why all roots are not working right now.
Here's the white screen of death upon recovery if the developers want to see.
luckily I got a stock rom so everytime I test a root and failed, I just flash the stock and it works again.
Click to expand...
Click to collapse
have u install custom recovery before rooting ? and what the version of firmware do you use ?
Hi, Actually this happens after attempting to install CWM, TWRP or whatsoever custom recovery thru odin. The device is not yet rooted as custom recovery needs to be flashed first. Device is usb debug enabled tho.
firmware is andr 4.4.2 kitkat.
baseband: g313hzdxu0aob1
build: kot49h.g313hzdbu0aob4
trafargal said:
Guys please infform me if we have a cyanogenmod for our device .. bec. Im a big fan of CYANOGEN MOD . I want to change my stock rom to CM12 But i cant saw any compatible cyanogenmod for our device .. please help i want cyanogen for sgv .. thanks .. my device already running nemoid rom v1.1 but it does have too many bugs .. thanks please help
Click to expand...
Click to collapse
my suggestion is if u decided to install custom rom, so you should be ready with bugs. And about cyanogenmod, i've managed build CM11 rom for galaxy v, but still bootloop. cant open homescreen. i'll try to rebuild and fix it if i have free time. why not CM12 ? bcz the size of source code CM12 is very very large. And i dont have fast connection to download it.
---------- Post added at 05:55 AM ---------- Previous post was at 05:54 AM ----------
allaiza10 said:
Hi, Actually this happens after attempting to install CWM, TWRP or whatsoever custom recovery thru odin. The device is not yet rooted as custom recovery needs to be flashed first. Device is usb debug enabled tho.
firmware is andr 4.4.2 kitkat.
baseband: g313hzdxu0aob1
build: kot49h.g313hzdbu0aob4
Click to expand...
Click to collapse
try to use old firmware version. maybe can fix it.
Yup, using the old firware will fix the white screen upon entering recovery BUT, as we are here for "Custom Recovery". I have bought my galaxy v last february only. I think new versions of galaxy V had been modified so custom recovs cannot be flashed.
Note: Everytime I got white screen on attempts to flash any custom recovery, I just flash the stock rom and everythings working again. but, as you see in order to root the device, I need to flash a working custom recovery.
vroot,kingroot,frama root or any other 3rd party program roots doesnt work aswell.
allaiza10 said:
Yup, using the old firware will fix the white screen upon entering recovery BUT, as we are here for "Custom Recovery". I have bought my galaxy v last february only. I think new versions of galaxy V had been modified so custom recovs cannot be flashed.
Note: Everytime I got white screen on attempts to flash any custom recovery, I just flash the stock rom and everythings working again. but, as you see in order to root the device, I need to flash a working custom recovery.
vroot,kingroot,frama root or any other 3rd party program roots doesnt work aswell.
Click to expand...
Click to collapse
I do not advise you to use vroot, kingroot, framaroot or other third-party app for rooting. I've tried to install custom recovery with any firmware version and everything is fine. So I was also confused with what is actually happening on your device.
BTW, please quote my reply if you want to reply.
I only tried the 3rd party roots when all the flashing (CWM, TWRP) did not succeed. If you check other threads, it is not only me who is having this problem.
galaxy v problem
friyadhi_biermann said:
i got same problem too T.T, i try to instalng some stock CMWrecovery or TRWP but still white screen problem
Click to expand...
Click to collapse
cleverior.ipul said:
sorry for the late respons
have u try to flashing stockrom firmware thru odin ?
have u install custom recovery before rooting ? and what the version of firmware do you use ?
Click to expand...
Click to collapse
i tried to flash instal recovery http://forum.xda-developers.com/ace-4/development/recovery-twrp-recovery-2-8-5-0-samsung-t3038601 ( use odin 3.09 and 3.10 ) but still white screen problem while going in recovery mode, my phone can't rooted, T.T
help me a solution please
android ver kitkat 4.4.2
base G313HZDXUOAOB1
kernel ver 3.10.17-4213080 [email protected] #2 FRI 13 17:19:19 KST 2015
No. ver KOT49H.G313HZDBUOAOB4
product. vietnam
friyadhi_biermann said:
i tried to flash instal recovery http://forum.xda-developers.com/ace-4/development/recovery-twrp-recovery-2-8-5-0-samsung-t3038601 ( use odin 3.09 and 3.10 ) but still white screen problem while going in recovery mode, my phone can't rooted, T.T
help me a solution please
android ver kitkat 4.4.2
base G313HZDXUOAOB1
kernel ver 3.10.17-4213080 [email protected] #2 FRI 13 17:19:19 KST 2015
No. ver KOT49H.G313HZDBUOAOB4
product. vietnam
Click to expand...
Click to collapse
i dont know what the problems bcz i'm using AOB1 and install custom recovery and everything is fine. did u ever update system via OTA ?
cleverior.ipul said:
i dont know what the problems bcz i'm using AOB1 and install custom recovery and everything is fine. did u ever update system via OTA ?
Click to expand...
Click to collapse
for updating the system via OTA , I 've often tried it ... just for my G313HZDBUOAOB4 firmware upgrades via updates syetem original ... if there is a firmware XSE-G313HZDBUOAOB4 via mediafire I want to try downloading it . whether the teacher has his link ?
I can not download at uploaded.com and rapidgator.com
Pls help me unbrick my samsung gaaxy v sm g313hz...
Please someone help me how to unbick my samsung galaxy v, after rooting process my phone now stock in a white screen display and i tried to flash other ROM but it failed on ODEN. Hopefully theres ather way to unbick my phone. For those who know please help me. Thank you so much in advance..
Works on G313ML
It works perfectly on G313ML, Thanks a lot!!!!!!!
Naz32 said:
It works perfectly on G313ML, Thanks a lot!!!!!!!
Click to expand...
Click to collapse
what do you mean ? can u more specific ?
White screen galaxy v
please help
after i flash using odin stock rom, my galaxy v have sound but have white screen.
..
GenoStelar said:
please help
after i flash using odin stock rom, my galaxy v have sound but have white screen.
Click to expand...
Click to collapse
what firmware version you use ?
jonjie666 said:
..
Click to expand...
Click to collapse
????
Hello,
Tried all ROMS, none is working, below is the detail:
Installed
1 . CRISSCROSS ROM - no audio, while on call in earpiece and loudspeaker
2 . XtreStoLite-ROM-3.3.1-DPDP.zip ROM, Problem - AFter flash Phone model shows G925F AND NO CONNECTION TO NETWORK, EMERGENCY CALLS ALL TIME, TRIED flashing MODEM for g925w8 no LUCK
3. KIngfisher ROM, after flashing Kingfisher ROM, phone is STUCK AT
*KERNEL IS NOT SEANDROID ENFORCING* and phone will not turn ON.
SO , I guess there is NO working CUSTOM ROM fOR G925W8,canada. At the end I flashed stock BOJ7 AND Phone is working perfectly with 5 1 1 G925W8 BOJ7
I'm using the G925W8 on Xtrestolite. You must be missing something. I'm not sure what though
KAwAtA said:
I'm using the G925W8 on Xtrestolite. You must be missing something. I'm not sure what though
Click to expand...
Click to collapse
so why am I getting emergency calls?
1 can you tell me in detail that which steps did you follow?
2 what was your android version when you flashed rom?
3 what is your baseband verison now?
4 Was it rooted already?
5 Does this rom have spanish langauage? can you check for me?
Thank you
@Administr4tor
Custom ROMs for that work for W8
I've have confirmation from multiple users that my OZOP Rom is compatible and working flawlessly for the following devices Flat and Edge (rom is Edge based) F/I/T/W8. Could be more this are just the confirmed working devices.
Also OZOP is currently very active with development and actually about to be updated!
What ever Rom you decide is up to you.
Just letting you know there are options available.
Good luck
I believe you need to update your bootloaders using a stock 6.0.1 image or flash them via odin.
Also look in the T mobile section for a custom kernel like stang has a rom showing for. Our devices were basically secondhand tmobile rebranded as W8. Everything is literally the same minus us canadian guys cant use wifi calling.
So in short flash rom, then kernel and let it boot. Once it boots then turn it off and restart into recovery and flash call fix. If you need an updated callfix I can post a link here.
I found if you flash all three before first boot the zip from callfix creates a bootloop. Therefore it tells me the zip needs to be flashed over a built system
Nothing seems to work, No matter what I have No network connection... on any rom..
AndroTechGuy said:
Nothing seems to work, No matter what I have No network connection... on any rom..
Click to expand...
Click to collapse
You mentioned it worked on 5.1.1 thats your problem u need to take the ota or flash stock 6.0.1 with odin or find the 6.0.1 bootloader and radio and flash them cuz all the roms your trying are 6.0.1 base thats why u dont have service im suprised they even boot.
xstokerx said:
You mentioned it worked on 5.1.1 thats your problem u need to take the ota or flash stock 6.0.1 with odin or find the 6.0.1 bootloader and radio and flash them cuz all the roms your trying are 6.0.1 base thats why u dont have service im suprised they even boot.
Click to expand...
Click to collapse
I could have sworn I was running 6.0.1 stock, Maybe I wasn't, but alright I'll try to find the radio. thanks mate
christopherrrg said:
I believe you need to update your bootloaders using a stock 6.0.1 image or flash them via odin.
Also look in the T mobile section for a custom kernel like stang has a rom showing for. Our devices were basically secondhand tmobile rebranded as W8. Everything is literally the same minus us canadian guys cant use wifi calling.
So in short flash rom, then kernel and let it boot. Once it boots then turn it off and restart into recovery and flash call fix. If you need an updated callfix I can post a link here.
I found if you flash all three before first boot the zip from callfix creates a bootloop. Therefore it tells me the zip needs to be flashed over a built system
Click to expand...
Click to collapse
yes, I need updated call fix as the one I have is only for 5 1 1
Administr4tor said:
yes, I need updated call fix as the one I have is only for 5 1 1
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B4Gyz91x5k7gc2NBS2N5TFQwY0k/view?usp=drivesdk
Uploaded to my personal drive because I got tired of chasing the link. (Credits to author of zip, name inside.)
xstokerx said:
You mentioned it worked on 5.1.1 thats your problem u need to take the ota or flash stock 6.0.1 with odin or find the 6.0.1 bootloader and radio and flash them cuz all the roms your trying are 6.0.1 base thats why u dont have service im suprised they even boot.
Click to expand...
Click to collapse
Every time I try to flash the stock 6.0.1 i get SW Rev error Device 4 Binary 3.
AndroTechGuy said:
Every time I try to flash the stock 6.0.1 i get SW Rev error Device 4 Binary 3.
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/database/SM-G925W8/ get your firmware here for your carrier
I was told you get this error when trying to downgrade or by flashing the wrong package
Follow this http://www.w0lfdroid.com/2015/04/Ho...irmware-on-Samsung-Galaxy-S6-S6-Edge.html?m=1
xstokerx said:
http://www.sammobile.com/firmwares/database/SM-G925W8/ get your firmware here for your carrier
I was told you get this error when trying to downgrade or by flashing the wrong package
Follow this http://www.w0lfdroid.com/2015/04/Ho...irmware-on-Samsung-Galaxy-S6-S6-Edge.html?m=1
Click to expand...
Click to collapse
I know how to do it, the phone is unlocked, so not sure what carrier I should be flashing on it. I legit just need it to be able to use the Network, currently have it custom rom'd but no network.
xstokerx said:
http://www.sammobile.com/firmwares/database/SM-G925W8/ get your firmware here for your carrier
I was told you get this error when trying to downgrade or by flashing the wrong package
Follow this http://www.w0lfdroid.com/2015/04/Ho...irmware-on-Samsung-Galaxy-S6-S6-Edge.html?m=1
Click to expand...
Click to collapse
So the best I've been able to do is get it on a custom rom with no network connection at all. Seems like Im losing the ability to get it working. I tried Wind, telus stock 6.0.1's and i get the SW rev error, I've tried Rogers 5.1.1, and I get the same. Only thing that flashed on my device was "AP_G925W8VLU2AOG2_CL4808800_QB5701859_REV02_user_low_ship.tar" but it didn't boot past Galaxy S6 Edge logo, and recovery wasn't loading to try and factory reset to continue boot. I'm pretty sure this phone is dead.... I mean the custom rom was 6.0.1 with arter kernel, but no service... I'm lost...
christopherrrg said:
https://drive.google.com/file/d/0B4Gyz91x5k7gc2NBS2N5TFQwY0k/view?usp=drivesdk
Uploaded to my personal drive because I got tired of chasing the link. (Credits to author of zip, name inside.)
Click to expand...
Click to collapse
Thanks Sir.
Any ideas to my posts above?
guaranteed it's the bootloader and modem.
Once you flash the 6.0.1 ones via ODIN, then both crisscross and xtrolite should work. Crisscross, you will need to flash an independent audio fix which Christ have provided you in the post above.
Xtrolite (which I'm using with Twisted V4 Kernel) has it integrated so you shouldn't have any audio problems. Mind you, if you're still having trouble. Flash back 5.1.1 stock kernel and then let it update officially via samsung kies or OTA. Our phones now have 6.0.1 release so once you do that, you'll automatically have the new 6.0.1 bootloader and modem for our 925w8 phones. Then it'll be simple to flash a custom rom at that point.
Just update stock system to Marshmallow 6.0.1 (or flash stock 6.0.1 via Odin), then flash TWRP, do standard wipe with TWRP (Data, Cache and Dalvik), flash XtreStoLite via TWRP and everything will work
I have canadian S6 Edge and XtreStoLite is working very good
cripez said:
guaranteed it's the bootloader and modem.
Once you flash the 6.0.1 ones via ODIN, then both crisscross and xtrolite should work. Crisscross, you will need to flash an independent audio fix which Christ have provided you in the post above.
Xtrolite (which I'm using with Twisted V4 Kernel) has it integrated so you shouldn't have any audio problems. Mind you, if you're still having trouble. Flash back 5.1.1 stock kernel and then let it update officially via samsung kies or OTA. Our phones now have 6.0.1 release so once you do that, you'll automatically have the new 6.0.1 bootloader and modem for our 925w8 phones. Then it'll be simple to flash a custom rom at that point.
Click to expand...
Click to collapse
issue is I can't make the 6.0.1 stock files flash, always getting the SW rev error when cm.bin tries to flash, I've tried, Rogers, Wind, Telus stock files, nothing works. On CrissCross right now but not service... I want to get back to stock or at least make the bootloader work.
EDIT: Apparently using the most recent koodo stock, got me back to stock rom and with service! Now to root and do the custom rom properly! Thanks all!
christopherrrg said:
I believe you need to update your bootloaders using a stock 6.0.1 image or flash them via odin.
Also look in the T mobile section for a custom kernel like stang has a rom showing for. Our devices were basically secondhand tmobile rebranded as W8. Everything is literally the same minus us canadian guys cant use wifi calling.
So in short flash rom, then kernel and let it boot. Once it boots then turn it off and restart into recovery and flash call fix. If you need an updated callfix I can post a link here.
I found if you flash all three before first boot the zip from callfix creates a bootloop. Therefore it tells me the zip needs to be flashed over a built system
Click to expand...
Click to collapse
THIS G925W8 is working perfectly in 5 1 1 , I was able to make calls to all networks including GSM and WCDMA, I checked IMEI status with code 197328640 and IMIE status is OK, then after I flashed 6 0 1 and then the IMIE status turns to NOT GOOD and I am unable to make calls and stuck at EMERGENCY CALLS, looks like this PHONE IS JACKED??
Hey fellows
I bought a slightly used phone and it shows the above message when I try to update.
This means my phone was rooted before.
Please tell me how to fix this issue.
Will there be any modifications to baseband, kernel,boot loader also?
If this is the case, how to revert back everything to stock
Thanks in advance
Attached: phone details
Wasiq01 said:
Hey fellows
I bought a slightly used phone and it shows the above message when I try to update.
This means my phone was rooted before.
Please tell me how to fix this issue.
Will there be any modifications to baseband, kernel,boot loader also?
If this is the case, how to revert back everything to stock
Thanks in advance
Attached: phone details
Click to expand...
Click to collapse
Phone looks normal from that picture? Go on phone status... does it say official or custom?
Flashing back to stock firmware should reset it all to official stock then you can upgrade.
Or you can just flash a stock upgrade through odin... that way it will all be reset to official and updated.
Phone Status: Custom
firmware: Custom (in Odin Mode)
Binary: Custom
Wasiq01 said:
Phone Status: Custom
firmware: Custom (in Odin Mode)
Binary: Custom
Click to expand...
Click to collapse
So that's why you can't upgrade ota.
Flash 6.0.1 firmware through odin it will work
Boss...I need a favour just send me a link for best auto root available for my device working on android 6.0.1
Thx In advance
Wasiq01 said:
Boss...I need a favour just send me a link for best auto root available for my device working on android 6.0.1
Thx In advance
Click to expand...
Click to collapse
https://download.chainfire.eu/732/C...F-Auto-Root-zeroltetmo-zeroltetmo-smg925t.zip
Hi, Guys.
I just installed new OREO Firmware CRB7 [PDA G950FXXU1CRB7-CSC G950FOXM1CRAP-BL G950FXXU1CRB7 (DBT) - Changelist 12993656] and I did exactly the same steps as in the previous CRAP Firmware – HERE ( https://forum.xda-developers.com/galaxy-s8/development/oreoodin-official-firmware-galaxy-s8-t3748669 ).
This time I’ve used a new ODIN, v3.12.10.1, and I didn’t absolutely NOTHING different from what I had already done in the previous flash, so there is nothing more to add to what was said earlier, just follow what it has been said, as simple as that.
I'm so sorry no longer available to answer user questions, but understand that I'm just reporting something I just did, without any kind of problems.
Other questions that could be put beyond all that has been said, I could only answer with certainty if I had experienced this same doubt, that is, I would have to reproduce the problem to give the answer, understand?
Has anyone asked if through an update via update.zip could install Recovery TWRP or Root ... I would say yes, but I can not be sure of this because I never did ... it's a matter of trying!
So I leave here the LINK of new firmware, to be installed via ODIN, just like any other firmware to be installed this way ... there are no secrets.
I also leave LINK for Magisk v16.0 (1600), Magisk Manager v5.6.1, Magisk Uninstaller 2018-02-22 and TWRP 3.2.1-0 dreamlte, for anyone who needs this software.
Good Luck to All
PDA G950FXXU1CRB7 - CSC G950FOXM1CRAP - BL G950FXXU1CRB7 (DBT)
https://www.androidfilehost.com/?fid=746010030569955941
Magisk v16.0(1600)+MagiskManager v5.6.1+MagiskUninstaller_2018-02-22
https://www.androidfilehost.com/?fid=962187416754462528
Odin3 v3.12.10.1
https://www.androidfilehost.com/?fid=673956719939821692
TWRP 3.2.1-0 dreamlte
https://www.androidfilehost.com/?fid=746010030569953853
Hi. I have not yet installed any custom ROM, just installed TWRP and Magisk. Later I'm going to test some ROMs, but so far everything is perfect, no problem.
I already had a custom ROM before flashing the new firmware, so maybe I had no problems installing the TWRP or Root
Does this work on 950FD?
I'm on 'CRAP' right now.
Thanks
it does not let me flash the twrp, it tells me that only official binaries
juan_itoo said:
it does not let me flash the twrp, it tells me that only official binaries
Click to expand...
Click to collapse
Because phone is on Prenormal Status, no? If so, you may attend 7 days with phone ON, without restart them (I think [emoji848]).
S8 [email protected] v7.3.4(109)
limafranco said:
Does this work on 950FD?
I'm on 'CRAP' right now.
Thanks
Click to expand...
Click to collapse
Sincerely? I don't know, buddy! But phones I think identicals, so yes [emoji57]
S8 [email protected] v7.3.4(109)
This
juan_itoo said:
This
Click to expand...
Click to collapse
[emoji21]Just like I said
S8 [email protected] v7.3.4(109)
trocopassu said:
Sincerely? I don't know, buddy! But phones I think identicals, so yes [emoji57]
S8 [email protected] v7.3.4(109)
Click to expand...
Click to collapse
Yes, it works.
I just flashed. Its the same FW for both versions (Exynos)
How u r knox 0x0 after flashing twrp and magisk @trocopassu
mayank233 said:
How u r knox 0x0 after flashing twrp and magisk @trocopassu
Click to expand...
Click to collapse
Custom Kernel
S8 [email protected] v7.3.4(109)
Samsung just released a new Odin version that fixes the problem of the new compression files.
Now the flash is done the old way
PS: Odin version 3.13.1
Please, a mirror of the ROM
alejobog said:
Please, a mirror of the ROM
Click to expand...
Click to collapse
Hi.
File to download is not ROM but the Official Stock Firmware for the S8 G950F.
Now, new ODIN with has .lz4 file support, so you can download Official Stock Firmware directly from SamMobile and flash this on your S8 G950F (or other) with the new ODIN.
I leave here LINKs for SamMobile G950F Firmware and ODIN with support for .lz4 files
ODIN (.lz4 support) - https://www.androidfilehost.com/?fid=746010030569958654
SamMobile G950F (firmware) - https://www.sammobile.com/firmwares/galaxy-s8/SM-G950F/
hello ... after installing without any problem I wanted to install TWRP and I get this message in download mode 'Only official released binaries are allowed to be flashed' ... until here comes, I think I'll have to wait a week for it to be unlock ...
I also have a question ... then I can install TWRP, root, magisk, viperfx, etc. ??
I appreciate your advice and experiences in this regard ... or if you know of any solution to avoid having to wait. Thank you.
ppelao3k said:
hello ... after installing without any problem I wanted to install TWRP and I get this message in download mode 'Only official released binaries are allowed to be flashed' ... until here comes, I think I'll have to wait a week for it to be unlock ...
I also have a question ... then I can install TWRP, root, magisk, viperfx, etc. ??
I appreciate your advice and experiences in this regard ... or if you know of any solution to avoid having to wait. Thank you.
Click to expand...
Click to collapse
Yes, same problem.
if I have this message in download mode --- 'Only official released binaries are allowed to be flashed' after having installed official CRB7 --- can I flash official AQL5 ROM to go back to version 7 and thus be able to install TWRP ??
Please advise before doing so, as I understand in the state that is today, I must wait a week to install something in download mode ... is it correct?
If I make a mistake without asking, I could be without a phone for a week and I would have to commit suicide ... hahaha
Thank you.
Well I just have to thank the help that trocopassu gave to me to install the rom, was of extreme importance
Best wish to her
VITMAD said:
Well I just have to thank the help that trocopassu gave to me to install the rom, was of extreme importance
Best wish to her
Click to expand...
Click to collapse
Thanks, matte. Congratulations also to you for your decision.
how could you manage to flash without giving instruction about OEM unlock? i dont have option in dev mode for OEM unlock.