Hi There,
In this thread i want to combine cm development for Galaxy Tab A T550/555.
Actualy it is an evervolv fork which compiles to the end but wont boot.
Here is the original ROM:
http://forum.xda-developers.com/android/development/rom-evervolv-galaxy-tab-sm-t550-t3411069
http://forum.xda-developers.com/android/development/rom-evervolv-galaxy-tab-sm-t555-t3415346
The actual device tree:
<project name="CyanogenMod/android_device_qcom_common" path="device/qcom_common" remote="github" revision="cm-13.0"/>
<project name="Chemnitzer/android_device_samsung_msm8916-common" path="device/samsung/msm8916-common" remote="github" revision="cm-13.0"/>
<project name="Evervolv/android_kernel_samsung_msm8916" path="kernel/samsung/msm8916" remote="github" revision="mm-6.0"/>
<project name="Chemnitzer/android_device_samsung_gt5-common" path="device/samsung/gt5-common" remote="github" revision="cm-13.0"/>
<project name="Chemnitzer/android_device_samsung_gt510ltexx" path="device/samsung/gt510ltexx" remote="github" revision="cm-13.0"/>
<project name="CyanogenMod/android_device_samsung_qcom-common" path="device/samsung/qcom-common" remote="github" revision="cm-13.0"/>
<project name="Chemnitzer/android_device_samsung_gt510wifixx" path="device/samsung/gt510wifixx" remote="github" revision="cm-13.0"/>
<project revision="mm-6.0" remote="github" path="vendor/samsung" name="Evervolv/android_vendor_samsung"/>
The reason for this forum is to get help in development as I am pretty new to this but wouldt like to see progress in custom rom for this device, so feel free to try it out and support this device
For getting to this point I want to appreciate the help of
@deadman96385
@ashyx
@Android-Andi
Link to latest build: https://www.androidfilehost.com/?fid=24694152805483773
TWRP: http://forum.xda-developers.com/android/development/recovery-t3426560
Actual status:
kmsg.log: in attached
last kmsg or /sys/fs/pstore/console-ramoops actualy dont exist
ADB while boot not possible
Attention:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* If you dont like this rom, Stay away from this thread!
*/
Actual to-do:
building gt510lte from scratch now as deadmans evervolc device tree compiles but also wont boot.
So: any help for evervolve fork still welcome, will update device tree in time...
sync gt510wifixx device tree
upload gt510wifixx build
include vendor from original tree- propably a reason...
Hi there. You posted on my message thing. Umm, tbh I wouldn't know what would be the cause, but i would be happy to test it for you. Will you be doing CM 14 when it comes out? We will be in touch i believe.
GhostCode64 said:
Hi there. You posted on my message thing. Umm, tbh I wouldn't know what would be the cause, but i would be happy to test it for you. Will you be doing CM 14 when it comes out? We will be in touch i believe.
Click to expand...
Click to collapse
If you are abled to check why it doesn't boot feel free to do so.
Any help is welcome
Which one you own?
If you want to test t550 I can fork and compile in time
Chemnitzer said:
Actual status:
kmsg.log: in attached
last kmsg or /sys/fs/pstore/console-ramoops actualy dont exist
ADB while boot not possible
Attention:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* If you dont like this rom, Stay away from this thread!
*/
Click to expand...
Click to collapse
Hi Chemnitzer,
I think i must write in english, hope you unterstand me, with my Bad english, as a german User
When installed this Rom, become this Rom automatically updates, or must i make manually reinstall if a new Version avaiable?
I have a sm-t555 tab....
Thx Lupopa
i have a question regarding evervlov: how do i sync it? i have a instruction here but only for cm13: https://nathanpfry.com/how-to-setup-ubuntu-16-04-lts-xenial-xerus-to-compile-android-roms/
hellcat50 said:
i have a question regarding evervlov: how do i sync it? i have a instruction here but only for cm13: https://nathanpfry.com/how-to-setup-ubuntu-16-04-lts-xenial-xerus-to-compile-android-roms/
Click to expand...
Click to collapse
I prefere 14.04 as there should be more compatibility with toolchain
https://nathanpfry.com/how-to-prepare-ubuntu-14-04-lts-trusty-tahr-to-compile-android-roms/
Init repo in your working folder with this: repo init -u git://github.com/evervolv/android.git -b mm-6.0
Chemnitzer said:
I prefere 14.04 as there should be more compability with toolchain
https://nathanpfry.com/how-to-prepare-ubuntu-14-04-lts-trusty-tahr-to-compile-android-roms/
Init repo in your working folder with this: repo init -u git://github.com/evervolv/android.git -b mm-6.0
Click to expand...
Click to collapse
thank you, will try this out tomorrow
downloading the source right now
my build is not booting. it seems that the kernel is corrupt because the tab jumps straight into recovery everytime. will build it again soon
@Chemnitzer Everytime I build evervlov my tab won't start. it jumps straight into the recovery. do you know a solution?
edit: i booted it but deadmen don't have fixed anything
hellcat50 said:
@Chemnitzer Everytime I build evervlov my tab won't start. it jumps straight into the recovery. do you know a solution?
edit: i booted it but deadmen don't have fixed anything
Click to expand...
Click to collapse
Yeah recognized that already while porting his rom. He probably didn't push latest updates.
That's why I startet from scratch now and paused the fork.
Let me know when you fixed something/ push on GitHub
hellcat50 said:
@Chemnitzer Everytime I build evervlov my tab won't start. it jumps straight into the recovery. do you know a solution?
edit: i booted it but deadmen don't have fixed anything
Click to expand...
Click to collapse
How did you get it booting?
Chemnitzer said:
How did you get it booting?
Click to expand...
Click to collapse
just waited and suddendly it booted. oh and you need a 1 firmware, not the updated 4 fw from usa
hellcat50 said:
just waited and suddendly it booted. oh and you need a 1 firmware, not the updated 4 fw from usa
Click to expand...
Click to collapse
Can you Link?
Did you install via TWRP?
@Chemnitzer, too bad the ROM you publisher here dies not boot, I am modifying the Tablet for someone right now. Do you have a more recent build I could test right away?
SecUpwN said:
@Chemnitzer, too bad the ROM you publisher here dies not boot, I am modifying the Tablet for someone right now. Do you have a more recent build I could test right away?
Click to expand...
Click to collapse
Yeah as written in the op...
Actualy I don't work on it anymore as there was just not enough response.
Else possibility is Deadmens evervolv rom which seems not to be supported also.
If you have skills for development you are welcome
Chemnitzer said:
Actualy I don't work on it anymore as there was just not enough response.
Click to expand...
Click to collapse
Sorry to hear that. My family did not have that tablet before, otherwise I would have helped.
Chemnitzer said:
Else possibility is Deadmens evervolv rom which seems not to be supported also. If you have skills for development you are welcome
Click to expand...
Click to collapse
I currently just have the skills to root and mofify devices, yet no hardcore ROM development. The ideal case would have been to find a CM 13 ROM for this tablet. Which recent ROM (as close to AOSP as possible) do you recommend?
Related
DEVELOPMENT THREAD
FOR DEVELOPERS ONLY
DISCUSSION THREAD FOR USERS:
http://forum.xda-developers.com/showthread.php?t=1419102
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.0 (ICS), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
SOURCES
Click to expand...
Click to collapse
General:
http://github.com/CyanogenMod
Device:
http://github.com/CyanogenMod/android_device_samsung_galaxys2
Kernel:
https://github.com/CyanogenMod/android_kernel_samsung_smdk4210
HOWTO BUILD
Click to expand...
Click to collapse
http://teamhacksung.org/wiki/index.php/CyanogenMod9:How_to_build
HOWTO SEND PATCHES
Click to expand...
Click to collapse
Getting Started:
http://wiki.cyanogenmod.com/wiki/Howto:_Gerrit
Example:
- cd ~/android/system
- repo start branchname CyanogenMod/android_device_samsung_galaxys2
-- Make your changes at device/samsung/galaxys2
- cd device/samsung/galaxys2
- git add -A
- git commit -a
- cd ~/android/system
- repo upload CyanogenMod/android_device_samsung_galaxys2
Navigate to http://review.cyanogenmod.com , click your commit and add codeworkx and xplodwild as reviewer.
placeholder
why not release one with the 2.6x kernel that has a lot less bugs but no mic in calls too?
thanks
EDIT
OH Dear LORD this is the smoothest thing i have ever used... calling works fine for me !!
qwerty warrior said:
why not release one with the 2.6x kernel that has a lot less bugs but no mic in calls too?
thanks
Click to expand...
Click to collapse
with 2.6.x kernel there are a lot more bugs.
muppetterror said:
can't flash it it say installation aborted
Click to expand...
Click to collapse
Instructions for ODIN:
- Extract it
- Copy GApps and Faceunlock ZIPs to your internal SDCard
- Reboot into Download Mode
- Flash Bootloader, Code and Modem using Odin
- After flashing pull battery and reinsert it
- Boot into Recovery
- Flash GApps and Faceunlock ZIPs
- DO A DATA WIPE / FACTORY RESET (otherwise your calendar sync will not work)
- Reboot
muppetterror said:
can't flash it it say installation aborted
Click to expand...
Click to collapse
i love you!!!
codeworkx said:
i love you!!!
Click to expand...
Click to collapse
sorry for beeing a noob... lol i don't read much
Damn it, Vodafone. Y U NITZ?
Thanks for the release codeworkx, you're awesome!
- Boot into Recovery
- Flash GApps and Faceunlock ZIPs
sdcard cannot be mounted in this recovery.
/EDIT:
My bad, I should placed them on sdcard before flashing in odin. XD
It would be great to open a separated help thread, so we can read the updates from this thread easily.
We will get 100 pages of users asking for help in a few hours...
Is it possible to make the phone not crash if you disable the auto update of time and other informations over your mobile network? As far as i can tell, this is mostly what it is used for. It also provides some networking information but maybe switching to manual fixes that? Anyone tried?
http://en.wikipedia.org/wiki/NITZ
i got an error with the cwm zip.
random offset: 0x195
Guys 28.8 is the latest gapps?
Sent from my GT-I9100 using Tapatalk
hervelo said:
It would be great to open a separated help thread, so we can read the updates from this thread easily.
We will get 100 pages of users asking for help in a few hours...
Click to expand...
Click to collapse
Really, if OP allow...
marcelotorres said:
Really, if OP allow...
Click to expand...
Click to collapse
there will be no updates
qasq said:
just one noobish question. is it possible to make one rom from those two that are avalible now? I mean take working mic in calls from this one, and put that into the one that is sometime avalible already, and than make fully funtctional frankenstein from both of them? would be great.
Click to expand...
Click to collapse
no. you ever tried to use half win xp + half win 7? ;-)
MariusWildfire said:
is it possible to use it without a simcard? just playing a bit with ics using wifi for an internet connection ?
Click to expand...
Click to collapse
yes
ddpruel said:
Thanks so much !!
hows the phone function working (cant hang up, no mic, etc) ?
Click to expand...
Click to collapse
works as long as your provider doesnt support nitz
Where is the face unlock zip?
Sent from HydrOG3N MOD S2.
Technology Evolves, Android Evolves.
HydrOG3N is THE Revolution.
Is there a list of supported & non supported providers for nitz? I'd like to know if my provider supports nitz or not. Awesome work guys keep it up! Oh & merry Christmas too all!
Sent from my GT-I9100 using Tapatalk
marcelotorres said:
Really, if OP allow...
Click to expand...
Click to collapse
@ Codeworks
I understood that as an indirect question.
Like: Do you allow somebody to start another thread (without official support of course) for people ask their questions without spamming here, so the community (and not the devs) may be able to try and answer questions/share their experiences)...
Anyway, fröhliche Weihnachten
And thanks to the whole team,
you guys are great
Paradoxxx said:
Where is the face unlock zip?
Sent from HydrOG3N MOD S2.
Technology Evolves, Android Evolves.
HydrOG3N is THE Revolution.
Click to expand...
Click to collapse
in the odin package
DEVELOPMENT THREAD
FOR DEVELOPERS ONLY
Click to expand...
Click to collapse
DISCUSSION THREAD FOR USERS:
http://forum.xda-developers.com/showthread.php?t=1627854
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.0 (ICS), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
DOWNLOADS
Click to expand...
Click to collapse
http://get.cm/?device=n7000
SOURCES
Click to expand...
Click to collapse
http://github.com/cyanogenmod
HOW TO SEND PATCHES
Click to expand...
Click to collapse
Getting Started:
http://wiki.cyanogenmod.com/wiki/Howto:_Gerrit
Example:
- cd ~/android/system
- repo start branchname CyanogenMod/android_device_samsung_galaxynote
-- Make your changes at device/samsung/galaxynote
- cd device/samsung/galaxynote
- git add -A
- git commit -a
- cd ~/android/system
- repo upload CyanogenMod/android_device_samsung_galaxynote
Navigate to http://review.cyanogenmod.com , click your commit and add codeworkx and xplodwild as reviewer.
DEVELOPERS
Click to expand...
Click to collapse
xplodwild, mauimauer, entropy512, codeworkx, teamhacksung, cyanogenmod, and maybe a few others I might not think of right now
SUPPORT US
Click to expand...
Click to collapse
You can either help us by giving FULL bug reports WITH LOGS, WITH REPRO CASE, ETC, or by submitting patches.
If you're not a developer, you can hit the "Donate to me" button up ahead, or hit the Donate button on teamhacksung's page
Thanks to all donators!
Reserved post
Reserved post #2
Thank you so much bro! Thank you so much Teamhacksung for bringing cm9 official to note!
Nice
Sent from my GT-N7000 using Tapatalk
That was fast. Thanks a lot.
Donation: 9V6598784L709515T
Sorry for spamming this developing thread btw. Was replying in the wrong browser tab
Sent from my GT-N7000 using xda premium
Welcome Cyanogen 9 team
Sent from my LG-P500 using xda premium
Good luck.
So, s-pen works incorrectly in landscape mode, right?
I'll try to push a fix soon if I'll get familiar with gerrit etc and if it won't be already fixed.
Could you please update 'how to send patches' with information valid for your Note branch? Or it's basically the same?
imilka said:
Good luck.
So, s-pen works incorrectly in landscape mode, right?
I'll try to push a fix soon if I'll get familiar with gerrit etc and if it won't be already fixed.
Could you please update 'how to send patches' with information valid for your Note branch? Or it's basically the same?
Click to expand...
Click to collapse
If it's a kernel fix, the standard gerrit procedure applies as the kernel is in the main cyanogenmod github repo.
If it's a device tree fix, that isn't in the main cyanogenmod repo yet, so instead you should do a pull request on github, OR use git format-patch to generate a properly formatted patch that someone with write access to the device tree can apply.
Nice. Welcome to note !!!
Enviado desde mi GT-N7000 usando Tapatalk 2
Wouldn't it have been easier to continue from imilka's build? I know that was based on the s2 but it is a very similar device. It was also stable.
DISCUSSION THREAD FOR USERS:
http://forum.xda-developers.com/show....php?t=1627854
i think
Call mic issue is caused miss header file in kernel.
sound/soc/codecs/mc1n2/mc1n2_cfg_q1.h
w1ll1m said:
Wouldn't it have been easier to continue from imilka's build? I know that was based on the s2 but it is a very similar device. It was also stable.
Click to expand...
Click to collapse
No, as his builds were created by replacing files in galaxys2 nightlies, not from a device tree. They also depended on leak kernels which I will not trust again for a long time after the recent rash of hardbricks across multiple devices.
Please continue this line of discussion in the discussion thread.
sjkoon said:
i think
Call mic issue is caused miss header file in kernel.
sound/soc/codecs/mc1n2/mc1n2_cfg_q1.h
Click to expand...
Click to collapse
Yup - and that's already fixed. Problem was that xplod pulled in the wrong kernel tree, and the one he pulled in was older.
xplod pushed a pen fix, it's working in landscape now. (imilka, we're on IRC now fyi)
Video recording will get fixed as soon as we can figure out why the build system keeps overriding media_profiles.xml
Build 2 - Updated 1/5/12
Friends,
BUILD # 2 now online
- Updated 1/5/12
* Please check OP, and the General Thread for Changelog and Discussion Enjoy!
I have just flashed version two and the mounts points in android and receovery appear to be the wrong way around.
External_sd is mounted as emmc/internal storage and internal is mounted as /sdcard.
Q2V said:
Danger!!!
Stop flash this cm9 because i have bricked my note after flash it.
Im experience to flash everyday difference custom rom no problem.
Right now my note is completely dead.
Click to expand...
Click to collapse
1) This isn't development.
2) No one has hardbricked that followed the instructions. It's in red text - DO NOT FLASH THIS FROM AN I9220 REPACK.
Read Before FLASH you ******* ***!!!!!
Its said 9999999999999999 times do not FLASH FROM I9220 GOT IT BRO?
timstanley1985 said:
I have just flashed version two and the mounts points in android and receovery appear to be the wrong way around.
External_sd is mounted as emmc/internal storage and internal is mounted as /sdcard.
Click to expand...
Click to collapse
This is the AOSP way, and it's the same for all CyanogenMod devices. Sorry, you'll have to get used to it
Thread cleaned
This thread has been cleaned. Stick to Development only - there is a discussion thread that is monitored, the link has been posted.
[ROM][N910F] Unofficial CM-12.0 for 910F Note 4. (trltexx)
CyanogenMod is a free, community built distribution of Android which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
For weeks there has been a team effort initiated by Gekkehenkie11 to bring CyanogenMod to the N910F. Many test builds have been released in this thread: http://forum.xda-developers.com/note-4/general/rd-porting-cm12-t2951934 .
More and more users have asked for a ROM thread, to make releases more clear. Plus it's time to focus more on R&D in the R&D thread, and less on flash / usage issues. So here it is. The thread you've asked for.
Consider this the worst ROM thread in history.
This ROM would not have been possible without Slayher and Fattire! They have identified and solved a lot of the common trlte issues, and merged them back into the CM source. See their thread for more information about their work: http://forum.xda-developers.com/note-4-tmobile/development/unoffcial-cm-12-0-t-mobile-note-4-t2964887 . We've picked up from there to modify everything for the N910F, rebase the work on the N910F kernel source, fix RIL issues, fix up missing blobs, tweaks, etc.
To quote Slayher:
CM-12.0 is not ready. There are still massive changes of the code base as it progresses to add the already established features and enhancements.
There will be things broken.
Click to expand...
Click to collapse
More info will follow later.
Expect bugs, flash at your own peril. Make sure you wipe the device, even if you come from a previous build.
Enjoy!
P.s.
This is all done on our free time. Take it or leave it. Don't expect support..... but we'll try our best to help you.
MOD EDIT -
The OP is no longer active but here are the latest builds, flash at your own risk.
Build 5th Feb...no need to flash blobs anymore.
gekkehenkie11 said:
new build up ! https://mega.co.nz/#!vQJlQL7Y!yIvuVFx85vQV1gdayQ9GmRt54Kq4tdx5C52BzDdO8b0
NFC should work now without draining your battery ! And vibrator works again.
Click to expand...
Click to collapse
6th Feb
gekkehenkie11 said:
New build:
https://mega.co.nz/#!CQ5EkbzR!qYs2bM0dDbWs6c1enWjFUy-J3qokvs2t64zjWj0wopI
* GPS is fixed.
* NFC works but either leave it always on or uninstall NFC: cause if you boot while NFC was off, it will drain battery during that session !
* It may say 'no service' during some sessions, this is a known upstream bug at the moment, but doesn't seem to affect functionality at all
More changes here: http://www.cmxlog.com/12/trltetmo/
Enjoy !
Click to expand...
Click to collapse
Latest build 11th Feb
gekkehenkie11 said:
New build:
https://mega.co.nz/#!iEBUHLCY!KNv3R4kFZFwJZ4jYszka2UOf4T39CA6XFTmGK_14TZs
Changelog: http://www.cmxlog.com/12/trltetmo/
Click to expand...
Click to collapse
19th Feb -- Daily builds can be found HERE
Gapps - HERE
XDA:DevDB Information
CM-12.0 for 910F Note 4, ROM for the Samsung Galaxy Note 4
Contributors
Preaper, gekkehenkie11, slayher, fattire
Source Code: http://github.com/jaapp
ROM OS Version: 5.0.x Lollipop
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2014-12-29
Last Updated 2015-02-21
Great job guys!!!
Maybe add last build date in topic? And gapps in OP?
910G here, was running previous builds, just tried to flash this, couldn't get past boot animation, just flashed gekke's blobs on top to see if it boots.
This latest build contains changes to make the Samsung smart cover function. Which makes the device turn on in my pocket. This is an issue that needs to be addressed soon.
Welcome to the world of alpha builds
I am stuck in bootloop in this build
mike13ftw said:
I am stuck in bootloop in this build
Click to expand...
Click to collapse
Same
I also have a bootloop with 28 dec build
mmui90 said:
Same
Click to expand...
Click to collapse
Flash 25dec build back and everything works.
Bootloops only happen if you don't wipe your device before flashing.
Preaper said:
Bootloops only happen if you don't wipe your device before flashing.
Click to expand...
Click to collapse
Full wipe?
Preaper said:
Bootloops only happen if you don't wipe your device before flashing.
Click to expand...
Click to collapse
Just full wiped, still not booting.
For the people having issues flashing the latest build, this is the previous one from the 25th: https://mega.co.nz/#!D0FEFQ6Y!fihYU8Lu-jQl7Fr7SqnBOv5SIUrX0dSUY1sbqZXbdto
Give that one a shot and let me know if this makes any difference.
Beukhof1 said:
Full wipe?
Click to expand...
Click to collapse
Yes.
Preaper said:
For the people having issues flashing the latest build, this is the previous one from the 25th: https://mega.co.nz/#!D0FEFQ6Y!fihYU8Lu-jQl7Fr7SqnBOv5SIUrX0dSUY1sbqZXbdto
Give that one a shot and let me know if this makes any difference.
[...]
Click to expand...
Click to collapse
25th build works. 28th (after full wipe) however doesn't for me.
Preaper said:
For the people having issues flashing the latest build, this is the previous one from the 25th: https://mega.co.nz/#!D0FEFQ6Y!fihYU8Lu-jQl7Fr7SqnBOv5SIUrX0dSUY1sbqZXbdto
Give that one a shot and let me know if this makes any difference.
Yes.
Click to expand...
Click to collapse
Ok will try a full wipe and report back.
28th build doesnt boot as well. Tried with a full wipe. 25th build works fine for me.
Beukhof1 said:
Great job guys!!!
Maybe add last build date in topic? And gapps in OP?
Click to expand...
Click to collapse
Thanks for the suggestion. I'll add this later.
Some screenshots please?
kosako17 said:
Some screenshots please?
Click to expand...
Click to collapse
It's stock cm12. Looks the same on every phone.
I believe I know what is causing the issues with the latest build. The boardconfig changed, and I was behind pulling from some repo's. To fix it I have to nuke my build environment and rebuild everything again. This usually takes 6 hours which means it will finish when I'm in bed. Expect a new build in 24 hours or so.
Hi all.
Can someone please explain in few words why CM ROMs are better than TW ROMs? What are the advantages of flashing CM builds over TW etc? Thx
cornelito said:
Hi all.
Can someone please explain in few words why CM ROMs are better than TW ROMs? What are the advantages of flashing CM builds over TW etc? Thx
Click to expand...
Click to collapse
The question for me is why does Samsung put TW on Android? Pure Android is so sexy. With CM it's even more.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
What Is Sensei?
Sensei is a kernel for the Mi4i (ferrari) ported to the Redmi3 (Ido) that is derived from @dh-harald sources. Built with UberTC to ensure the best performance and stability with a highly optimized system. Cherry-picked features & fixes from AOSP, CM and other repos to provide useful and well-tested features that make your phone better. It does not have useless kernel patches or make dangerous or experimental changes to your phone that cause weird or inexplicable problems.
Features
Multirom support
Advanced color control
Doubletap2wake & Sweep2Wake
Fastcharge
Better Ram & Battery Management
Quickwake
Fast bootup (Using all cores)
Better thermal handling
Compability
Sensei is compatible with any rom derived from the CyanogenMod source (CM12.1, CM13, Resurrection Remix) & MIUI
DONATIONS
Sensei is built on open-source software which doesn't allow me to charge it for anything. If you like the kernel and want to donate, here's my paypal email "[email protected]"
Where to download?
Downloads are in the changelog on the 2nd post
How to install?
Download the kernel
Move it to your phone if downloaded from PC
Reboot into recovery
Locate the kernel and install. You don't have to wipe cache/dalvik.
XDA:DevDB Information
Sensei Kernel, Kernel for the Xiaomi Redmi 3
Contributors
haikalizz
Source Code: https://gitlab.com/webhaikal/SenseiIdo
Kernel Special Features:
Version Information
Status: Testing
Created 2016-05-20
Last Updated 2016-05-20
Changelog & Downloads
Sensei 1.0-dev (20/05/2016)
Initial Release
Download: https://www.androidfilehost.com/?fid=24545065934258628
MD5:
Reserved
First! Yes!!!!!!
@Haikailizz this is way beyond awesome
davtse said:
First! Yes!!!!!!
@Haikailizz this is way beyond awesome
Click to expand...
Click to collapse
Time to bring the features...
haikalizz said:
Time to bring the features...
Click to expand...
Click to collapse
Bootloop.
MIUI 6.5.12
Just MI logo
Can you guys try this?
Code:
adb root
adb disable-verity
Tell me if it works. Found this at TWRP thread.
haikalizz said:
Can you guys try this?
Code:
adb root
adb disable-verity
Tell me if it works. Found this at TWRP thread.
Click to expand...
Click to collapse
One moment.
Bootloop too
6.5.12
If bootloop, go into fastboot, reflash recovery, restore previous kernel and it boots normally
davtse said:
If bootloop, go into fastboot, reflash recovery, restore previous kernel and it boots normally
Click to expand...
Click to collapse
Can anybody do
adb root
adb disable-verity
Click to expand...
Click to collapse
My phone dissapere from adb devices after I send
adb root
Click to expand...
Click to collapse
to it
ROM by xiaomi.eu
St.Noigel said:
Can anybody do
My phone dissapere from adb devices after I send
to it
ROM by xiaomi.eu
Click to expand...
Click to collapse
I dont have a Redmi3 to test it out but I'm trying to fix it as best as I can... I'm guessing its mainly because of either partitions or dm-verity... I'm not sure.
You could tryvjust the adb disable-verity only.
Can someone confirm that Doubletap2wake & Sweep2Wake works (if someone managed to flash it) ?
Lightning- said:
Can someone confirm that Doubletap2wake & Sweep2Wake works (if someone managed to flash it) ?
Click to expand...
Click to collapse
CM13 -based RR - bootloop too.
hm
error adb miui 6.5.12.
Stuck at mi logo with cm12.1 nehz build..
@haikalizz may be I can make some log-s for you? Will TWRP log helps in developing?
St.Noigel said:
@haikalizz may be I can make some log-s for you? Will TWRP log helps in developing?
Click to expand...
Click to collapse
Kmsg logs if can, but once you restart phone, those logs are resetted..
haikalizz said:
Kmsg logs if can, but once you restart phone, those logs are resetted..
Click to expand...
Click to collapse
How I can make it?
if I can do it only like here it`s impossible - phone can`t boot (((
ADB from TWRP can`t make it I think
Confirm stuck on MI logo even with Cm12.1 cofface, I can't even go to the recovery with fisical method. Re flashed boot.img from fastboot
LINEAGE OS 13 FOR HARPIA
In the wake of perfected Nougat and nearly complete Oreo for our beloved G4 Play… the ROM literally none of you have asked for is finally here!!!
:victory::victory::victory:
NOTE: This ROM has been discontinued, due to Xposed being released for Nougat, but more so due to sync errors whenever I try to pull the latest changes to my system with repo sync. I'll keep the thread here in case any of you want to build this for yourselves, since the steps needed to build everything differ from what the official Lineage wiki says about building Lin13.
What’s Working
Everything seems good to me
What’s Not Working
I can't find anything, so let me know
How To Build
Follow the standard procedure found on the Lineage Wiki for building Lineage 13, except DO NOT INSTALL OPENJDK 7!!! If you have this on your system, remove it before starting the process. JUST STICK WITH JAVA 8!!!
After doing your repo sync to get everything on your computer, run "breakfast harpia" so it creates a roomservice.xml file. After breakfast is done, replace the roomservice file it auto-generates with this one below:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="Dark98/android_device_motorola_harpia" path="device/motorola/harpia" remote="github" />
<project name="Dark98/android_device_motorola_msm8916-common" path="device/motorola/msm8916-common" remote="github" />
<project name="SubhrajyotiSen/android_kernel_motorola_msm8916" path="kernel/motorola/msm8916" remote="github" revision="cm-14.1" />
<project name="LineageOS/android_external_bson" path="external/bson" remote="github" />
<project name="LineageOS/android_external_stlport" path="external/stlport" remote="github" />
<project name="LineageOS/android_device_qcom_common" path="device/qcom/common" remote="github" />
<project name="moto8916/proprietary_vendor_motorola" path="vendor/motorola/" remote="github" revision="cm-13.0" />
</manifest>
and do a "repo sync --force-sync". Once that's done, just brunch it and you'll be good to go!
As a side note, to add custom ringtones/alarms/sounds to your ROM, you need to wait for it to successfully build once, then put your desired .ogg files in the respective /system/media/audio/ folder that's contained in your specific device's /out directory, and build again (don't do a make clean or make clobber, it'll erase your work). Interpret me saying this however you want
Download Link
DOWNLOAD FROM GOOGLE DRIVE HERE
I also recommend a custom kernel, like SomeFeak or SquidKernel.
Questions You May Want To Ask
Why would I even want to use this ROM?
Since Xposed for Nougat just came out, there's literally no practical reason for you to need to use this anymore. I guess if you want some nostalgia, but that's it.
Why would you want to even make this ROM?
Something about me just wants at least one stable, updated MM ROM for this thing. I really can’t tell you why, just a weird urge I have.
I’m getting Java build errors when I try to compile!!!
Make sure you have only Java 8, and no Java 7.
I’m getting build errors at Gello when I try to compile!!!
You can disable Gello during the build process, which I did. Edit the moto8916.mk file in moto8916-common device directory and comment out all the stuff about Gello.
I’m getting status 2 errors at the kernel part when I try to compile!!!
GET RID OF JAVA 7!!!!!
How often will you be updating this?
This is obviously an unofficial build, so while I’ll try to make regular releases if everything works out alright, don’t expect that. I’m thinking maybe once a week or so, maybe every 2 weeks if life gets really busy.
Why won't my device encrypt? When I try to make it encrypt it just bootloops or reboots without doing anything
Make sure you're UNROOTED before you try and encrypt. Having a custom kernel/Xposed/etc. is fine, you just need to take off root before running the encryption process. Once it's done, you can reroot and be happy again.
There's something wrong with jack-admin when I try to compile and it won't work!!!
Run the following commands from inside the root of your build directory:
export JACK_SERVER_VM_ARGUMENTS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx#g" (REPLACE # WITH 1GB LESS THAN THE AMOUNT OF RAM YOU HAVE)
./prebuilts/sdk/tools/jack-admin kill-server
./prebuilts/sdk/tools/jack-admin start-server
Then try to brunch again, see if that fixes it
Special Thanks
My good man @Dark98 has been a huge help in getting this to work. He was actually the first to make a Lin13 build for Harpia about 2 months ago, so without his initial work in solving all the compiler error stuff (like the BoardConfig thing mentioned above) I wouldn’t be able to release what I did. Also, special thanks to all you guys in the SomeFeak telegram group!
One day I want to learn how to make ROMs and have that same willpower as you. xD
I've never used Xposed. Maybe I'll test the ROM to see what it looks like.
Good luck and good work!
Arushidesu said:
One day I want to learn how to make ROMs and have that same willpower as you. xD
I've never used Xposed. Maybe I'll test the ROM to see what it looks like.
Good luck and good work!
Click to expand...
Click to collapse
I just flashed back to MM firmware from soak test 7.1.1, and even when installing the ROM on this bootloader/firmware it still doesn't boot. Stay tuned though, I feel like I'm VERY close to getting this thing to work!
UPDATE: After fixing a command regarding GCC exporting, I'm getting new compilation errors with the kernel. I COULD skip kernel compilation, but I'm not sure how that would work out when trying to actually flash the ROM.
jasonmerc said:
UPDATE: After fixing a command regarding GCC exporting, I'm getting new compilation errors with the kernel. I COULD skip kernel compilation, but I'm not sure how that would work out when trying to actually flash the ROM.
Click to expand...
Click to collapse
Alright, I don't know a thing about what goes on under the hood here, but doesn't getting compilation errors mean a broken kernel? And as far as I know, a broken kernel would lead to booting errors, won't even boot up I guess? Correct me if I'm wrong, please
NovaKenn said:
Alright, I don't know a thing about what goes on under the hood here, but doesn't getting compilation errors mean a broken kernel? And as far as I know, a broken kernel would lead to booting errors, won't even boot up I guess? Correct me if I'm wrong, please
Click to expand...
Click to collapse
That's exactly what a broken kernel would do. Before the kernel would compile, but it still wouldn't boot even when flashing a different kernel. Something else under the hood is going on here, which I was told my gcc export commands would fix. Now that I put in the gcc export stuff, it can't compile the kernel, and therefore never finishes compiling the ROM. I'm looking into this right now, not sure when I'l get a solution though (seems harder than I thought to fix)
jasonmerc said:
That's exactly what a broken kernel would do. Before the kernel would compile, but it still wouldn't boot even when flashing a different kernel. Something else under the hood is going on here, which I was told my gcc export commands would fix. Now that I put in the gcc export stuff, it can't compile the kernel, and therefore never finishes compiling the ROM. I'm looking into this right now, not sure when I'l get a solution though (seems harder than I thought to fix)
Click to expand...
Click to collapse
Appreciate the amount of effort you're putting in here, but I really think it would have been worth the hard work if you had gone for LOS 15 instead. Not many seem to have interest in opting for a MM ROM now. Personally, I would like to try Xposed on MM at least once as I stumbled across XDA only after N.
Anyways, we'll be waiting for your ROM! All the best to you mate!
NovaKenn said:
Appreciate the amount of effort you're putting in here, but I really think it would have been worth the hard work if you had gone for LOS 15 instead. Not many seem to have interest in opting for a MM ROM now. Personally, I would like to try Xposed on MM at least once as I stumbled across XDA only after N.
Anyways, we'll be waiting for your ROM! All the best to you mate!
Click to expand...
Click to collapse
Some other developers are already working on O roms: There's an alpha build of GZOSP Oreo on Android File Host (made by the same guy that's helped me with building this ROM) if you'd like to look at that as well. I may move to Oreo eventually, but I'd REALLY like to get this working before I do. Even if it's not my daily driver forever, to be able to make builds if I want to would be ideal.
jasonmerc said:
Some other developers are already working on O roms: There's an alpha build of GZOSP Oreo on Android File Host (made by the same guy that's helped me with building this ROM) if you'd like to look at that as well. I may move to Oreo eventually, but I'd REALLY like to get this working before I do.
Click to expand...
Click to collapse
GZOSP done so soon? Well gotta try it out once anyway. Let's taste it once.
NovaKenn said:
GZOSP done so soon? Is that for harpia though?
Click to expand...
Click to collapse
It's far from stable, but yes it is for Harpia. Feel free to take a look and flash it if you want, help give Dark98 some support as a thanks for helping me with this
But back on topic though, I have another build running on my PC at home at the moment. I had to edit the gcc export script a little bit, if it fixes the problem I'll update the first post with the fixed command to add.
UPDATE: My good man @facuarmo suggested I take the boot.img of Josh's older (but more stable) Lin13 build and put it in my newer, non-booting Lin13 build for a sort of workaround until I can figure out how to get sources compiled correctly on my own. I've just uploaded a "fixed" ROM zip to my google drive if any of you want to try this out. I'll be making a NAND backup of my Nougat ROM then giving this a try myself.
EDIT: Replacing the boot image did nothing, so back to the drawing board
GOOD NEWS SORTA!!! Josh was able to compile a new Lineage 13 build, which I tested and can confirm it works. He's gonna share his local manifests with me so I can build and maintain it. If it still won't build even after that, I'll ask him if I can give a link to his build, to hold you guys over who are waiting for this.
Big shout out to Josh who's been a tremendous help this whole time. If I knew his XDA username I'd cite it, but otherwise you can find him on GitHub:
https://github.com/dark98
I am testing the update of Josh and it goes very well, I keep in touch with the (telegram)
Is Lineage 13 marshmallow?
Enviado desde mi Moto G Play mediante Tapatalk
mario156090 said:
Is Lineage 13 marshmallow?
Enviado desde mi Moto G Play mediante Tapatalk
Click to expand...
Click to collapse
yup
Neither Josh nor I have any idea why this isn't working for me. I've seemingly 1:1 copied everything he's done (besides the distro of Linux I use) and I still get weird errors when he gets none. My last hope is going to be replace Ubuntu with Debian for my Android Building VM, and if that doesn't work I'm going to have to abandon this since I'm not sure how to fix the problems I'm getting.
In the meantime though, here is his build of Lin13 in case you all want to run that.
jasonmerc said:
Neither Josh nor I have any idea why this isn't working for me. I've seemingly 1:1 copied everything he's done (besides the distro of Linux I use) and I still get weird errors when he gets none. My last hope is going to be replace Ubuntu with Debian for my Android Building VM, and if that doesn't work I'm going to have to abandon this since I'm not sure how to fix the problems I'm getting.
In the meantime though, here is his build of Lin13 in case you all want to run that.
Click to expand...
Click to collapse
Running stable? Or is it unstable-ish?
NovaKenn said:
Running stable? Or is it unstable-ish?
Click to expand...
Click to collapse
100% stable, everything works great from what I can see. I flashed SomeFeaK kernel as well, so maybe that's attributing to it, but still everything works fine.
Quick update though, I found out from Josh that I apparently DON'T NEED JAVA 7 AT ALL during the compilation, contrary to what Lineage WIki's build instructions say for Lineage 13. Not only am I removing Java 7 completely and trying again, but I'm editing my manifests as well. I hope this works.
Great news guys! It built on my own system!!! I'm not sure if it'll actually boot (since I'm rebuilding with a some little goodies in there to thank you all for your partience) but this is a very good sign! As usual, stay tuned for updates!
EDIT 1: New build is up, check the download link for Lineage 10062017. I haven't been able to test if it boots yet, but it's there nonetheless
I just flashed my new 10-06 build over the 10-01 one Josh made, and I was actually able to boot it!!!!! Everything is officially working now!