My phone is breck (bootloop but can access fastboot) - Xiaomi Redmi 3 Questions & Answers

So I tried to change the ROM of my phone because the vendor's one had malware but it was worse, my phone is stuck at boot screen and can't do anything with it.
First I tried to install a ROM with TWRP, it installed but it was just a black screen, you could only see the battery status.
Then I tried to install the global ROM that is on the official xiaomi site but it didn't work and it locked my phone.
Now I can't use TWRP, please help me. I am desperate.
Miflash isn't detecting the phone, but the PC does cause it listed under Android Phone->Android ADB Interface on device manager.

1st:
http://en.miui.com/thread-277276-1-1.html
Once you rebooted it into download mode, use this:
http://en.miui.com/thread-254606-1-1.html

My PC is no longer detecting the phone, only detects Qualcomm 9008

Ok, it is working till the miflash step it says "receiving hello packet" in red

You will need to flash a ROM using fastboot.
First install fastboot on your pc: http://www.theandroidsoul.com/how-to...t-setup-75174/
Second Download a flashable Rom: http://en.miui.com/a-234.html (make sure to choose the right one)
Unzip the rom and navigate to the 'images' folder
Put the phone into Fastboot mode (volume down and power button together until fastboot appears)
Connect the phone to pc with USB
Shift Right click on a blank space in the folder and choose 'open command window here'
run the following commands. one at a time
fastboot devices
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash system system.img
fastboot reboot

Feriol said:
You will need to flash a ROM using fastboot.
First install fastboot on your pc: http://www.theandroidsoul.com/how-to...t-setup-75174/
Second Download a flashable Rom: http://en.miui.com/a-234.html (make sure to choose the right one)
Unzip the rom and navigate to the 'images' folder
Put the phone into Fastboot mode (volume down and power button together until fastboot appears)
Connect the phone to pc with USB
Shift Right click on a blank space in the folder and choose 'open command window here'
run the following commands. one at a time
fastboot devices
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash system system.img
fastboot reboot
Click to expand...
Click to collapse
After that I use miflash?
Failed after second command

Hello guys, i have a redmi 3s china version, so i try to find global version, i installed all driver and try to use with miflash that:
land_global_images_V7.5.9.0.MALMIDE_20160805.0000.29_6.0_global_470b843c10.tgz
(if i use xiaomiflash i get error) meanwhile with miflash i see device and i flash it but something wrong , i restart the phone i stuck on the logo MI
I try also to download land_global_images_V7.5.4.0.MALMIDE_20160523.0000.23_6.0_global_dc5d804271.tar
seems is the right firmware
So i try again to flash in fastboot mode with miflash but i get error like i have no permission.
So i extract the whole firmware on a dir where there is ADB files , same problem...the device is locked
I try online the procedure with sms to unlock the bootloader ( i think is the only way, right?) or there are any other solution?
Maybe there is a stock rom to replace the original rom and put the global rom in another way?
Thanks in advanced
Bye

Benz83 said:
Hello guys, i have a redmi 3s china version, so i try to find global version, i installed all driver and try to use with miflash that:
land_global_images_V7.5.9.0.MALMIDE_20160805.0000.29_6.0_global_470b843c10.tgz
(if i use xiaomiflash i get error) meanwhile with miflash i see device and i flash it but something wrong , i restart the phone i stuck on the logo MI
I try also to download land_global_images_V7.5.4.0.MALMIDE_20160523.0000.23_6.0_global_dc5d804271.tar
seems is the right firmware
So i try again to flash in fastboot mode with miflash but i get error like i have no permission.
So i extract the whole firmware on a dir where there is ADB files , same problem...the d: evice is locked
I try online the procedure with sms to unlock the bootloader ( i think is the only way, right?) or there are any other solution?
Maybe there is a stock rom to replace the original rom and put the global rom in another way?
Thanks in advanced
Bye
Click to expand...
Click to collapse
Try this: https://www.reddit.com/r/Xiaomi/wiki/roms/flashofficial
or this: http://en.miui.com/thread-290959-1-1.html

andrespm said:
After that I use miflash?
Failed after second command
Click to expand...
Click to collapse
After you run 'fastboot devices' is anything listed? Usually a string of numbers. If not then the computer isn't seeing your device.
Try rebooting the computer, and trying different USB leads and ports if possible and try again.
Using this method you don't have to use MiFlash, and is for when MiFlash doesn't work.
Once your phone is working again you can try again to install another ROM using traditional methods.

andrespm said:
Try this: https://www.reddit.com/r/Xiaomi/wiki/roms/flashofficial
or this: http://en.miui.com/thread-290959-1-1.html
Click to expand...
Click to collapse
Hello, i try the steps you give for EDL, after it the screen is not black but i see again the logo MI, i can go on fastboot mode but if i try to flash anykind of rom i get error "FAILED: remote: Critical partition flashing is not allowed)
other solution?
I think the only way is the unlock bootloader, but sincerally i dont know how it work. i did the steps online and the sim is on another device not xiaomi. I will get a sms from xiaomi with some kind of code? and after it how can use for bootloader?
There is another solution? I thinking....but why i cant use the original rom ?? always about the bootloader lock?
___
now i see another post ...use both volume to enter in download mode and on the miflash i saw port com 49, load a rom and start to flash it ...but....another error : The system can not find the file specified (0x80070002: Max buffer sector is 256)
___
This Morning i received the unlock code. When i use the tool stuck on 50℅

Related

[Redmi 3S] EDL Doesn't work?.

Hi everyone, i cant enter to EDL mode, i need it because my stock rom is unstable(All start with OTA update), after update it show me "unfortunately android.... has stopped " every 3-5 seconds. EDL works fine yesterday and i try to install fastboot rom, but since MiFlash get error when i install fastboot rom i cant reboot in EDL. Hope you can help me.
note: I try reboot trough fastboot and do same thing as the video.
youtube. com/watch?v=gPh1yE3or8g&feature=youtu. be
(Sorry for the video post, but i cant find something like this case in web and i really need help)
Hkoup said:
Hi everyone, i cant enter to EDL mode, i need it because my stock rom is unstable(All start with OTA update), after update it show me "unfortunately android.... has stopped " every 3-5 seconds. EDL works fine yesterday and i try to install fastboot rom, but since MiFlash get error when i install fastboot rom i cant reboot in EDL. Hope you can help me.
note: I try reboot trough fastboot and do same thing as the video.
youtube. com/watch?v=gPh1yE3or8g&feature=youtu. be
(Sorry for the video post, but i cant find something like this case in web and i really need help)
Click to expand...
Click to collapse
If you are using REDMI 3S/ 3S Prime then follow these steps to boot in to the edl mode
step 1 Download and extract MI unlock tools on your pc
step 2 Go to fast-boot mode by pressing vol down+ power button of your phone>connect it to pc via data cable>open extracted folder of mi flash tools (I recommend you to use the fast boot files which are available with mi unlock tools so you need to download mi unlock tool and extract it with the help of winrar ) press shift and right click then click on command prompt
and type these commands
fastboot devices
Press enter
fastboot oem edl
press enter
Now you are in Edl mode...enjoy....

Oneplus X brick

Hello guys,
i have a bricked rooted oneplus x
I had issues with the rooted rom so i flashed the newest stock rom via twrp
The phone boots up and showed the usual otimizing apps message. After the proccess is done it just the usual "let me helpt set up your phone page" and then restarts
I cant acces twrp anymore and when i try to acces the stock recovery it just shows a oneplus logo
I do have access to fastboot though (i hope that leaves some hope)
I have tried the MegaUnbrickGuide here in the forum but i wasn't able to install the drivers i need for that method
One more thing whenever i try
Code:
fastboot boot recovery.img
i get the "remote dtb not found" message
Does that have to do with developer options not being unlocked?
Any ideas on how to just get some form of working os installed on the device
(i dont care wheter rooted or not at this point have been trying stuff for hours now)
regards
Jan
First download Minimal ADB and Fastboot and install it.
Go into fastboot mode.
1. Re-unlock your bootloader using the command - fastboot oem unlock
2. After doing that, download the latest version of TWRP(which at the time of writing this is 3.1.0) and rename it to 'recovery.img'
3. Open a command window in the place you have downloaded the recovery by pressing the shift key and right clicking and then choosing the option Open Command WIndow Here... Flash the recovery using the command fastboot flash recovery recovery.img
4. Boot into it using the command fastboot boot recovery.img
5. If it still gives 'remote dtb not found' then follow this guide: https://forum.xda-developers.com/oneplus-x/help/opx-remote-dtb-solution-t3480274
6. If it boots into recovery, your phone is now fine and go ahead and flash whatever ROM you want.
Cheers!

Stuck on fastboot mode After installing a Custom ROM..PLZ Help

i flashed a rom on my device(asus zenfone 2 laser ZE550kl) and after flashing i tried try to reboot to system..even i tried removing battery and starting by pressing power but still it goes fastboot mode. I tried all the buttons combinations,Wiped n number of times,....but still after flashing the rom it starts directly in fastboot mode
Thanks in advance:
PLZZ help
Details:
Device:Asus zenfone 2 laser (ZE550kl Z00ld)
ROM : Viper-Z00L-7.1.2-Python-v2.1-20170721-OFFICIAL
Sidd_23 said:
i flashed a rom on my device(asus zenfone 2 laser ZE550kl) and after flashing i tried try to reboot to system..even i tried removing battery and starting by pressing power but still it goes fastboot mode. I tried all the buttons combinations,Wiped n number of times,....but still after flashing the rom it starts directly in fastboot mode
Thanks in advance:
PLZZ help
Details:
Device:Asus zenfone 2 laser (ZE550kl Z00ld)
ROM : Viper-Z00L-7.1.2-Python-v2.1-20170721-OFFICIAL
Click to expand...
Click to collapse
how about getting into recovery, wiping system and reflashing a new rom?
BatDroid said:
how about getting into recovery, wiping system and reflashing a new rom?
Click to expand...
Click to collapse
tried that 2 times...
i had the same problem..any woraround guys?
Hi , in your place I will download latest stock firmware for your device and extract , boot.img , system.img , recovery.img and also fastboot.img if you have inside your stock firmware.
Next install minimal adb&fastboot tool :
Download link:
https://androidfilehost.com/?fid=745425885120698566
How to install:
https://forum.xda-developers.com/showthread.php?t=2317790
Example how to flash those files from command line :
First check if your device is recognized on your pc :
write command in adb&fastboot terminal tool :
fastboot devices (you should see some numbers )
Now put those files inside adb folder where you installed adb&fastboot terminal for example :
C:/adb/
Now flash each file :
fastboot flash boot boot.img (and press Enter)
fastboot flash recovery recovery.img -||-
fastboot flash system system.img -||-
fastboot flash fastboot fastboot.img -||-
now :
fastboot reboot -||-
Now your device will reboot and it will take some time to load for the first time if it doesn't boot to system just put your device again into fastboot mode , open adb&fastboot terminal and write:
fastboot boot boot.img and wait little bit to boot up , if not try :
fastboot boot system.img ...
Before trying other options, I do suggest you to remove and replace the battery when the phone is disconnected from your PC and possibly when it's powered off. Then restart the phone in "Fastboot mode" by pressing VolumeUP+PowerButton keys until the phone vibrates. This helped me a lot and I was not able to find this trick in the dozen of discussions, except one, that I read about this topic.

Stuck in Fastboot mode

Hi, I have a serious problem with my moto G4 Play. I was on Android 7.1.1 but I prefer Android 6.0 so I tried to flash the stock ROM 6.0 of my device. It worked, but few minutes later my phone turned off.
Atm I only have access to fastboot mode but my Bootloader is locked, "USB debug" and "allow OEM unlock" are not activated.
I can do fastboot commands but I can't flash anything because Bootloader is locked, and if I try to use
Code:
fastboot oem unlock
, it says to allow OEM unlock in developer options first.
If I try to restart bootloader, restart recovery or factory reset it brings me back to fastboot mode with the following text :
"Your device didn't start up successfully.
Use the Software Repair Assistant on computer to repair your device.
Connect your device to your computer to get the Software Repair Assistant.
AP Fastboot Flash Mode (Secure)
Fastboot reason : Failed to initialize partition table
CID Read failure
Invalid CID status 0x69
ERROR : No booting image fund. Skip to fastboot
Boot up failed"
Click to expand...
Click to collapse
Thanks
any idea ?
Thanks
As Fastboot log tell you to use Software Repair Assistant , so use the softwer in order to repair your device .
https://www.verizonwireless.com/support/knowledge-base-116950/
Good luck : )
Teddy Lo said:
As Fastboot log tell you to use Software Repair Assistant , so use the softwer in order to repair your device .
https://www.verizonwireless.com/support/knowledge-base-116950/
Good luck : )
Click to expand...
Click to collapse
It doesn't work
Because of the phone IMEI is : 0000000000000, the Software Repair Assistant stucks in "Processing of the device informations"
Query: Stuck in fastboot mode
Hi there, on the top of your phone / tablet, hold down the power button for at least 30 seconds. Your tablet should force shutdown and restart out of fastboot mode into your android OS. Hope this helps.
Then try to flash latest stock firmware from fastboot ,
like for example
extract from stock firmware :
boot.img
recovery.img
fastboot.img
system.img
now for each one write
fastboot flash boot boot.img press enter
fastboot flash recovery recovery.img
fastboot flash system system.img
etc.
But find stock firmware for your device , don't use lower version because probably you will brick your device , try just with latest one.
Good luck : )
ps0q said:
Hi there, on the top of your phone / tablet, hold down the power button for at least 30 seconds. Your tablet should force shutdown and restart out of fastboot mode into your android OS. Hope this helps.
Click to expand...
Click to collapse
The problem is an icompatibility beetween bootloader and OS because they are not in the same version so I'm stuck in fastboot no matter what I do
Teddy Lo said:
Then try to flash latest stock firmware from fastboot ,
like for example
extract from stock firmware :
boot.img
recovery.img
fastboot.img
system.img
now for each one write
fastboot flash boot boot.img press enter
fastboot flash recovery recovery.img
fastboot flash system system.img
etc.
But find stock firmware for your device , don't use lower version because probably you will brick your device , try just with latest one.
Good luck : )
Click to expand...
Click to collapse
Thanks but my bootloader is locked so I can't flash anything

P20 Lite stuck in bootloop "AP_S_ABNORMAL 64"

Hello guys. My brother's Huawei p20 Lite is stuck in a bootloop. I'm unable to access the recovery and Erecovery (tried 10 times but it just won't work.) The only thing that works is Fastboot mode and it shows this error. Can't use Hisuite because apparently this phone isn't supported to be recovered using that program. How can I fix this phone? Is it permanently bricked?
Advanced07 said:
Hello guys. My brother's Huawei p20 Lite is stuck in a bootloop. I'm unable to access the recovery and Erecovery (tried 10 times but it just won't work.) The only thing that works is Fastboot mode and it shows this error. Can't use Hisuite because apparently this phone isn't supported to be recovered using that program. How can I fix this phone? Is it permanently bricked?
Click to expand...
Click to collapse
Hello, try this way out...
1. install on your PC "Minimal ADB and fastboot" tool, in fastboot mode run command
fastboot erase userdata
and try restart the device.
Or,
2. download and use a Service ROM with an sd/card or an USB-OTG flashdrive in dload mode. Download correct Service ROM from androidhost.ru website, unpack .zip archive , find dload file in "Software" folder, and simply transfer it to the SD card, without unpacking it! (instruction can be found in ReleaseDoc folder).
Turn off your phone and flash FW using three button combo .
The first step is to determine which variant of your device you are on.
In fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
(The bracketed (Cxxx) is your device’s regional variant.
This number is very important in determining the correct firmware to download!).
Service ROM can be found here:
https://androidhost.ru/search.html . Type Ane- or Anne- .
For example, for build number ANE-LX1 9.1.0.278 C432) :
https://androidhost.ru/Xar
Maybe it will help you...
-Alf- said:
Hello, try this way out...
1. install on your PC "Minimal ADB and fastboot" tool, in fastboot mode run command
fastboot erase userdata
and try restart the device.
Or,
2. download and use a Service ROM with an sd/card or an USB-OTG flashdrive in dload mode. Download correct Service ROM from androidhost.ru website, unpack .zip archive , find dload file in "Software" folder, and simply transfer it to the SD card, without unpacking it! (instruction can be found in ReleaseDoc folder).
Turn off your phone and flash FW using three button combo .
The first step is to determine which variant of your device you are on.
In fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
(The bracketed (Cxxx) is your device’s regional variant.
This number is very important in determining the correct firmware to download!).
Service ROM can be found here:
https://androidhost.ru/search.html . Type Ane- or Anne- .
For example, for build number ANE-LX1 9.1.0.278 C432) :
https://androidhost.ru/Xar
Maybe it will help you...
Click to expand...
Click to collapse
Thanks I'm gonna give these a try and I will let you know how it goes
-Alf- said:
Hello, try this way out...
1. install on your PC "Minimal ADB and fastboot" tool, in fastboot mode run command
fastboot erase userdata
and try restart the device.
Or,
2. download and use a Service ROM with an sd/card or an USB-OTG flashdrive in dload mode. Download correct Service ROM from androidhost.ru website, unpack .zip archive , find dload file in "Software" folder, and simply transfer it to the SD card, without unpacking it! (instruction can be found in ReleaseDoc folder).
Turn off your phone and flash FW using three button combo .
The first step is to determine which variant of your device you are on.
In fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
(The bracketed (Cxxx) is your device’s regional variant.
This number is very important in determining the correct firmware to download!).
Service ROM can be found here:
https://androidhost.ru/search.html . Type Ane- or Anne- .
For example, for build number ANE-LX1 9.1.0.278 C432) :
https://androidhost.ru/Xar
Maybe it will help you...
Click to expand...
Click to collapse
Tried all the ADB commands and they all failed, gonna try to use the SD card method.
-Alf- said:
Hello, try this way out...
1. install on your PC "Minimal ADB and fastboot" tool, in fastboot mode run command
fastboot erase userdata
and try restart the device.
Or,
2. download and use a Service ROM with an sd/card or an USB-OTG flashdrive in dload mode. Download correct Service ROM from androidhost.ru website, unpack .zip archive , find dload file in "Software" folder, and simply transfer it to the SD card, without unpacking it! (instruction can be found in ReleaseDoc folder).
Turn off your phone and flash FW using three button combo .
The first step is to determine which variant of your device you are on.
In fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
(The bracketed (Cxxx) is your device’s regional variant.
This number is very important in determining the correct firmware to download!).
Service ROM can be found here:
https://androidhost.ru/search.html . Type Ane- or Anne- .
For example, for build number ANE-LX1 9.1.0.278 C432) :
https://androidhost.ru/Xar
Maybe it will help you...
Click to expand...
Click to collapse
Device won't enter dload mode either. I hold the 3 buttons but it just bootloops.
Sorry, I'm out of ideas (with the locked bootloader).
-Alf- said:
Sorry, I'm out of ideas (with the locked bootloader).
Click to expand...
Click to collapse
I'm as well, the only thing that might work is removing and placing the battery ribbon cable again but I don't have the glue to close the case. Should I still try it?
Advanced07 said:
but I don't have the glue to close the case. Should I still try it?
Click to expand...
Click to collapse
You should try it, why not.
IMO it might be the HW problem , dead memory or damaged motherboard, (fastboot commands are not working).
-Alf- said:
You should try it, why not.
IMO it might be the HW problem , dead memory or damaged motherboard, (fastboot commands are not working).
Click to expand...
Click to collapse
The fastboot commands are working but it says I don't have permission to do it or something along those lines it refuses to execute it
Advanced07 said:
Hello guys. My brother's Huawei p20 Lite is stuck in a bootloop. I'm unable to access the recovery and Erecovery (tried 10 times but it just won't work.) The only thing that works is Fastboot mode and it shows this error. Can't use Hisuite because apparently this phone isn't supported to be recovered using that program. How can I fix this phone? Is it permanently bricked?
Click to expand...
Click to collapse
Same phone and same thing happened to me. What's different is that twrp recovery works.
It all started when I unlocked the bootloader with PotatoNV. I unlocked it with the fastboot oem unlock MYUNLOCKCODE command.
Then i flashed twrp: fastboot flash recovery_ramdisk d:\twrp.img
Then whatever happened, I started seeing the error "AP_S_ABNORMAL 64" in fastboot mode, but running commands was fine.
I deleted everything by entering the codes below with fastboot mode.
fastboot erase system -w
fastboot erase userdata
Then I reinstalled twrp recovery by entering the codes below and flashed a custom rom.
fastboot flash recovery_ramdisk d:\twrp.img
fastboot flash system d:\MyCustomRom.img
Suddenly what do I see.
When I rebooted with the fastboot reboot command, twrp was constantly opening. The system would not boot at all. I was desperately doing everything I could think of. Only one thing worked. I opened emui e-recovery by pressing the volume up, volume down and power keys at the same time. It was failing there and there was only one option; I clicked restart. The system booted this time, not twrp, and after a long wait, the main installation screen came.
biorap said:
I opened emui e-recovery by pressing the volume up, volume down and power keys at the same time. It was failing there
Click to expand...
Click to collapse
it is not e-recovery, this buttons combination triggers the installation of FW by the dload method.
biorap said:
fastboot erase system -w
fastboot erase userdata
Click to expand...
Click to collapse
Use stock Recovery - Wipe cache partition & Factory reset
biorap said:
flashed a custom rom
Click to expand...
Click to collapse
How to install Treble GSI ROMs on Kirin-devices:
https://forum.xda-developers.com/t/losq-lir-lineageos-17-1-18-1-unofficial-gsi.4219291/post-84305543
-Alf- said:
it is not e-recovery, this buttons combination triggers the installation of FW by the dload method.
Use stock Recovery - Wipe cache partition & Factory reset
How to install Treble GSI ROMs on Kirin-devices:
https://forum.xda-developers.com/t/losq-lir-lineageos-17-1-18-1-unofficial-gsi.4219291/post-84305543
Click to expand...
Click to collapse
Thank you for your clarify.
Is it possible to use stock recovery when i flash a custom rom via fastboot mode? I mean; do i have to use twrp when i wanna flash a custom rom? Is it possible to use custom rom with stock recovery?
biorap said:
Thank you for your clarify.
Is it possible to use stock recovery when i flash a custom rom via fastboot mode? I mean; do i have to use twrp when i wanna flash a custom rom? Is it possible to use custom rom with stock recovery?
Click to expand...
Click to collapse
Have you read?
https://forum.xda-developers.com/t/losq-lir-lineageos-17-1-18-1-unofficial-gsi.4219291/post-84305543

Categories

Resources