Oneplus X brick - OnePlus X Q&A, Help & Troubleshooting

Hello guys,
i have a bricked rooted oneplus x
I had issues with the rooted rom so i flashed the newest stock rom via twrp
The phone boots up and showed the usual otimizing apps message. After the proccess is done it just the usual "let me helpt set up your phone page" and then restarts
I cant acces twrp anymore and when i try to acces the stock recovery it just shows a oneplus logo
I do have access to fastboot though (i hope that leaves some hope)
I have tried the MegaUnbrickGuide here in the forum but i wasn't able to install the drivers i need for that method
One more thing whenever i try
Code:
fastboot boot recovery.img
i get the "remote dtb not found" message
Does that have to do with developer options not being unlocked?
Any ideas on how to just get some form of working os installed on the device
(i dont care wheter rooted or not at this point have been trying stuff for hours now)
regards
Jan

First download Minimal ADB and Fastboot and install it.
Go into fastboot mode.
1. Re-unlock your bootloader using the command - fastboot oem unlock
2. After doing that, download the latest version of TWRP(which at the time of writing this is 3.1.0) and rename it to 'recovery.img'
3. Open a command window in the place you have downloaded the recovery by pressing the shift key and right clicking and then choosing the option Open Command WIndow Here... Flash the recovery using the command fastboot flash recovery recovery.img
4. Boot into it using the command fastboot boot recovery.img
5. If it still gives 'remote dtb not found' then follow this guide: https://forum.xda-developers.com/oneplus-x/help/opx-remote-dtb-solution-t3480274
6. If it boots into recovery, your phone is now fine and go ahead and flash whatever ROM you want.
Cheers!

Related

My phone is breck (bootloop but can access fastboot)

So I tried to change the ROM of my phone because the vendor's one had malware but it was worse, my phone is stuck at boot screen and can't do anything with it.
First I tried to install a ROM with TWRP, it installed but it was just a black screen, you could only see the battery status.
Then I tried to install the global ROM that is on the official xiaomi site but it didn't work and it locked my phone.
Now I can't use TWRP, please help me. I am desperate.
Miflash isn't detecting the phone, but the PC does cause it listed under Android Phone->Android ADB Interface on device manager.
1st:
http://en.miui.com/thread-277276-1-1.html
Once you rebooted it into download mode, use this:
http://en.miui.com/thread-254606-1-1.html
My PC is no longer detecting the phone, only detects Qualcomm 9008
Ok, it is working till the miflash step it says "receiving hello packet" in red
You will need to flash a ROM using fastboot.
First install fastboot on your pc: http://www.theandroidsoul.com/how-to...t-setup-75174/
Second Download a flashable Rom: http://en.miui.com/a-234.html (make sure to choose the right one)
Unzip the rom and navigate to the 'images' folder
Put the phone into Fastboot mode (volume down and power button together until fastboot appears)
Connect the phone to pc with USB
Shift Right click on a blank space in the folder and choose 'open command window here'
run the following commands. one at a time
fastboot devices
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash system system.img
fastboot reboot
Feriol said:
You will need to flash a ROM using fastboot.
First install fastboot on your pc: http://www.theandroidsoul.com/how-to...t-setup-75174/
Second Download a flashable Rom: http://en.miui.com/a-234.html (make sure to choose the right one)
Unzip the rom and navigate to the 'images' folder
Put the phone into Fastboot mode (volume down and power button together until fastboot appears)
Connect the phone to pc with USB
Shift Right click on a blank space in the folder and choose 'open command window here'
run the following commands. one at a time
fastboot devices
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash system system.img
fastboot reboot
Click to expand...
Click to collapse
After that I use miflash?
Failed after second command
Hello guys, i have a redmi 3s china version, so i try to find global version, i installed all driver and try to use with miflash that:
land_global_images_V7.5.9.0.MALMIDE_20160805.0000.29_6.0_global_470b843c10.tgz
(if i use xiaomiflash i get error) meanwhile with miflash i see device and i flash it but something wrong , i restart the phone i stuck on the logo MI
I try also to download land_global_images_V7.5.4.0.MALMIDE_20160523.0000.23_6.0_global_dc5d804271.tar
seems is the right firmware
So i try again to flash in fastboot mode with miflash but i get error like i have no permission.
So i extract the whole firmware on a dir where there is ADB files , same problem...the device is locked
I try online the procedure with sms to unlock the bootloader ( i think is the only way, right?) or there are any other solution?
Maybe there is a stock rom to replace the original rom and put the global rom in another way?
Thanks in advanced
Bye
Benz83 said:
Hello guys, i have a redmi 3s china version, so i try to find global version, i installed all driver and try to use with miflash that:
land_global_images_V7.5.9.0.MALMIDE_20160805.0000.29_6.0_global_470b843c10.tgz
(if i use xiaomiflash i get error) meanwhile with miflash i see device and i flash it but something wrong , i restart the phone i stuck on the logo MI
I try also to download land_global_images_V7.5.4.0.MALMIDE_20160523.0000.23_6.0_global_dc5d804271.tar
seems is the right firmware
So i try again to flash in fastboot mode with miflash but i get error like i have no permission.
So i extract the whole firmware on a dir where there is ADB files , same problem...the d: evice is locked
I try online the procedure with sms to unlock the bootloader ( i think is the only way, right?) or there are any other solution?
Maybe there is a stock rom to replace the original rom and put the global rom in another way?
Thanks in advanced
Bye
Click to expand...
Click to collapse
Try this: https://www.reddit.com/r/Xiaomi/wiki/roms/flashofficial
or this: http://en.miui.com/thread-290959-1-1.html
andrespm said:
After that I use miflash?
Failed after second command
Click to expand...
Click to collapse
After you run 'fastboot devices' is anything listed? Usually a string of numbers. If not then the computer isn't seeing your device.
Try rebooting the computer, and trying different USB leads and ports if possible and try again.
Using this method you don't have to use MiFlash, and is for when MiFlash doesn't work.
Once your phone is working again you can try again to install another ROM using traditional methods.
andrespm said:
Try this: https://www.reddit.com/r/Xiaomi/wiki/roms/flashofficial
or this: http://en.miui.com/thread-290959-1-1.html
Click to expand...
Click to collapse
Hello, i try the steps you give for EDL, after it the screen is not black but i see again the logo MI, i can go on fastboot mode but if i try to flash anykind of rom i get error "FAILED: remote: Critical partition flashing is not allowed)
other solution?
I think the only way is the unlock bootloader, but sincerally i dont know how it work. i did the steps online and the sim is on another device not xiaomi. I will get a sms from xiaomi with some kind of code? and after it how can use for bootloader?
There is another solution? I thinking....but why i cant use the original rom ?? always about the bootloader lock?
___
now i see another post ...use both volume to enter in download mode and on the miflash i saw port com 49, load a rom and start to flash it ...but....another error : The system can not find the file specified (0x80070002: Max buffer sector is 256)
___
This Morning i received the unlock code. When i use the tool stuck on 50℅

Le eco le pro 3 (x727) freeze cannot start

My le eco le pro 3, during a normal day, stopped working.
If i try to turn it on i see the "LeEco powered by android" and after 10 seconds it turns off with a blue led.
I can not access the recovery mode, only the fastboot mode.
What fastboot command do i have to do to fix this? :crying:
If you can reach fastboot that is great already, i dont know if they bundle their devices with a recovery so you'll need to find a recovery for your device (quick google search, look for TWRP)
Also grab the drivers for your phone so you'll be able to write the recovery you downloaded.
Download the Google Universal ADB + Fastboot package (the 10 seconds installer)
Once everything is done, you'll need to go to the folder containing ADB and Fastboot with a command prompt
In the same folder you put the downloaded recovery. Put your phone in recovery mode, plug it, and type in the cmd : fastboot devices
If it recognize something you are good to go, you type fastboot flash recovery recoveryname.img
Then lookup for a Rom, i'm sure there is plenty of it, you'll flash the Rom either with sideload or if you have TWRP via Transfer
Gtahero74 said:
If you can reach fastboot that is great already, i dont know if they bundle their devices with a recovery so you'll need to find a recovery for your device (quick google search, look for TWRP)
Also grab the drivers for your phone so you'll be able to write the recovery you downloaded.
Download the Google Universal ADB + Fastboot package (the 10 seconds installer)
Once everything is done, you'll need to go to the folder containing ADB and Fastboot with a command prompt
In the same folder you put the downloaded recovery. Put your phone in recovery mode, plug it, and type in the cmd : fastboot devices
If it recognize something you are good to go, you type fastboot flash recovery recoveryname.img
Then lookup for a Rom, i'm sure there is plenty of it, you'll flash the Rom either with sideload or if you have TWRP via Transfer
Click to expand...
Click to collapse
Thank you so much.
I have type c broken, so i cannot plug it into my pc (i have found replacement).
I found this guide https://forum.xda-developers.com/le-pro3/how-to/flashing-guide-roundup-leeco-le-pro-3-t3511901
If i don't want to root, do i have to unlock the bootloader anyway?
It might be a stupid question, but I do not know much about this.
Yeah you will need to unlock the bootloader in order to flash a new rom
But roms aren't rooted so you can relock your bootloader after

entered wrong command while trying to root Motorola G6 play

Hi everyone,
I bought a Motorola G6 play model XT1922-3 type 374B and wanted root acces on this device.
So I started by succesfully unlocking my bootloader using the following tutorial.
After this a started tried to root the device using this tutorial.
This tutorial doesn't link to boot images anymore so I was able to find the moto-g6-play-jeter-patched-twrp.img somewhere else.
I did the following things:
- reboot to bootloader [Succesfull]
- fastboot boot moto-g6-play-jeter-patched-twrp.img [Unsuccesfull]
The device did boot the twrp image but I was unable to interact with it in any way. I couldn't swipe or press buttons.
I made a short video to show this.
I wanted to retry the whole thing so I did reboot to bootloader but then I accidently entered the following command:
fastboot flash boot moto-g6-play-jeter-patched-twrp.img picture of command prompt
After this I wasn't able to normally boot my device. When I try to do so the screen goes black and says n/a in the left corner.
Please does anyone know how I could either be able to boot my normal stock rom again or to have a rooted rom?
Kind regards Sven Onderbeke
Did you unlocked bootloader first. try to flash it again but this time 3 times in a row without restarting device
It's wrong
fastboot flash boot moto-g6-play-jeter-patched-twrp.img picture of command prompt
Should be
fastboot flash recovery moto-g6-play-jeter-patched-twrp.img picture of command prompt
And now it may not boot as you probably replaced boot.img with yours.
Not sure about that.
Try to download stock ROM and start from scratch
Sent from my K10 using Tapatalk

Infinix Hot 8 Root Help

please some can you help with the porting of twrp for this phone
even some help with official firmware v217 then we can root with magiusk and recovery image
this phone has the mtk processor MT6765
Infinix hot 8 pliss, i can instal twrp
Yes, help sir ? :good:
Infinix Hot 8 Need Support
Please really need support for root and twrp for this device,, this device is really nice,,
guys again some try and get the firmware v217 so we can extract the boot.img for magisk
i hope a update is coming soon plan to get thta to find this boot.img
online the v174 firmware is not the same
OTA Update for Infinix
X650C-H626DE-P-191005V224.zip
240Mb
capture via usbdebugg
http://www.mediafire.com/file/24dmq3hk7wbu6b3/X650C-H626DE-P-191005V224.zip/file
Mtk(mediatek) processor devices are not supported by custom ROM developers. Don't expect custom rom support for hot infinix 8. Sorry.
Did anyone try Readback in SP Flash tool? So far, I have not been successful in doing so.
got it
To unlock Bootloaded withour error in Fastboot use command
fastboot flashing unlock
and then on the phone select volume up key to acknowledge
phone is booted into fresh android
and now rooted with magisk
thnx guys all done for now
off topic if you have a pihole on rasberry pie you can see that this phone is THE WORST i do mean UTTER DISREGUARD for user privacy and send EVERYTHING and i mean EVERTHING home to china
included is user app usage
user data
crash analytics
with root i will NOW TAKE CARE to THIS
any one needs boot.img modified for firmware 216 for magisk root will upload it
darylzero said:
phone is booted into fresh android
and now rooted with magisk
thnx guys all done for now
off topic if you have a pihole on rasberry pie you can see that this phone is THE WORST i do mean UTTER DISREGUARD for user privacy and send EVERYTHING and i mean EVERTHING home to china
included is user app usage
user data
crash analytics
with root i will NOW TAKE CARE to THIS
any one needs boot.img modified for firmware 216 for magisk root will upload it
Click to expand...
Click to collapse
Screenshots
and UPLOAD THE orignal+patched BOOT.img
With complete VERSION INFO
Sent from my Infinix-X650C using XDA Labs
Boot.img Magisk patched
https://www.mediafire.com/file/0nzyd8t9yu8vqpd/magisk_patched.img/file
Original Boot.img
http://www.mediafire.com/file/32gtumg9q6r46bi/boot.img/file
downloaded the uploaded firmware from google drive v236 i think
used techno tool to flash this to phone to VERIFY the firmwareis good and proper
once the firmware was verified and phone booted i uploaded the boot.img from that firmware v236 to magisk on phone and patched it
got this patched boot.img back to computer
now for the flashing part
install ADB drivers
on phone activate usb debug and oem unlock in developer mode in settings
check ADB is working and sees phone n computer via usb with command
"adb shell"
shouls show a valid response indicating phone is ADB ready
next get it into Fastboot mode with command
"adb reboot bootloader"
wait till phone reboots into fastboot mode check fastboot mode is active with this command
"fastboot devices"
now to unlock bootloader in fastboot else it will give error
use command
"fastboot flashing unlock "
this will also give a acknowledge on the phone that BOOTLOADER will now b unlocked and press volume up to agree
once bootloader is unlocked in fast boot next it to flash the magisk boot.img patched
i have uploaded this to medifire please download
place this file named
magisk_patched.img on desktop
use command boot
"fastboot flash boot (( need to drag and drop the file magisk_patched.img from desktop here ))"
wait till magic is done
after use to
"fastboot reboot "
after phone reboot it will b factory reset and rooted check root with magisk manager installed
root checked verified
https://www.mediafire.com/view/a2ivwbm530gdb9v/Screenshot_20191210-122733.png/file
Thank you very much.
My phone now has root access
Are you installed TWRP Recovery in your device.???
darylzero said:
Boot.img Magisk patched
https://www.mediafire.com/file/0nzyd8t9yu8vqpd/magisk_patched.img/file
Original Boot.img
http://www.mediafire.com/file/32gtumg9q6r46bi/boot.img/file
downloaded the uploaded firmware from google drive v236 i think
used techno tool to flash this to phone to VERIFY the firmwareis good and proper
once the firmware was verified and phone booted i uploaded the boot.img from that firmware v236 to magisk on phone and patched it
got this patched boot.img back to computer
now for the flashing part
install ADB drivers
on phone activate usb debug and oem unlock in developer mode in settings
check ADB is working and sees phone n computer via usb with command
"adb shell"
shouls show a valid response indicating phone is ADB ready
next get it into Fastboot mode with command
"adb reboot bootloader"
wait till phone reboots into fastboot mode check fastboot mode is active with this command
"fastboot devices"
now to unlock bootloader in fastboot else it will give error
use command
"fastboot flashing unlock "
this will also give a acknowledge on the phone that BOOTLOADER will now b unlocked and press volume up to agree
once bootloader is unlocked in fast boot next it to flash the magisk boot.img patched
i have uploaded this to medifire please download
place this file named
magisk_patched.img on desktop
use command boot
"fastboot flash boot (( need to drag and drop the file magisk_patched.img from desktop here ))"
wait till magic is done
after use to
"fastboot reboot "
after phone reboot it will b factory reset and rooted check root with magisk manager installed
root checked verified
https://www.mediafire.com/view/a2ivwbm530gdb9v/Screenshot_20191210-122733.png/file
Click to expand...
Click to collapse
Are you installed TWRP Recovery in your device.i want TWRP recovery.can I install TWRP recovery after root my device.tel me.
https://forum.xda-developers.com/android/help/infinix-hot-8-t3986799/post80598837
Check this Thread for complete guide on
* UNLOCKING-BOOTLOADER
* ROOTING
* TWRP
* OPTIMIZATION
* UN-BRICKING
* CUSTOM-ROM
Sent from my Infinix-X650C using XDA Labs
How can I root my infinix hot 8 v x650D
Misbahu said:
How can I root my infinix hot 8 v x650D
Click to expand...
Click to collapse
Same method as I stated above.. just use compatible TWRP
Sent from my Infinix-X650C using XDA Labs
darylzero said:
Boot.img Magisk patched
https://www.mediafire.com/file/0nzyd8t9yu8vqpd/magisk_patched.img/file
Original Boot.img
http://www.mediafire.com/file/32gtumg9q6r46bi/boot.img/file
downloaded the uploaded firmware from google drive v236 i think
used techno tool to flash this to phone to VERIFY the firmwareis good and proper
once the firmware was verified and phone booted i uploaded the boot.img from that firmware v236 to magisk on phone and patched it
got this patched boot.img back to computer
now for the flashing part
install ADB drivers
on phone activate usb debug and oem unlock in developer mode in settings
check ADB is working and sees phone n computer via usb with command
"adb shell"
shouls show a valid response indicating phone is ADB ready
next get it into Fastboot mode with command
"adb reboot bootloader"
wait till phone reboots into fastboot mode check fastboot mode is active with this command
"fastboot devices"
now to unlock bootloader in fastboot else it will give error
use command
"fastboot flashing unlock "
this will also give a acknowledge on the phone that BOOTLOADER will now b unlocked and press volume up to agree
once bootloader is unlocked in fast boot next it to flash the magisk boot.img patched
i have uploaded this to medifire please download
place this file named
magisk_patched.img on desktop
use command boot
"fastboot flash boot (( need to drag and drop the file magisk_patched.img from desktop here ))"
wait till magic is done
after use to
"fastboot reboot "
after phone reboot it will b factory reset and rooted check root with magisk manager installed
root checked verified
https://www.mediafire.com/view/a2ivwbm530gdb9v/Screenshot_20191210-122733.png/file
Click to expand...
Click to collapse
I have an Infinix Hot 8 X650B.
I am trying to root the device. I have installed all ADB required files and the drivers.
The computer detects the drivers and the device is showing in ADB Device list.
But it's not being listed in fastboot devices check, and no fastboot command is working.
Please what can I do?
Papichoolo said:
I have an Infinix Hot 8 X650B.
I am trying to root the device. I have installed all ADB required files and the drivers.
The computer detects the drivers and the device is showing in ADB Device list.
But it's not being listed in fastboot devices check, and no fastboot command is working.
Please what can I do?
Click to expand...
Click to collapse
Try Installing driver's on an different computer and check if it loads to fastboot.
Sent from my Infinix-X650C using XDA Labs
AshhRED said:
Try Installing driver's on an different computer and check if it loads to fastboot.
Sent from my Infinix-X650C using XDA Labs
Click to expand...
Click to collapse
I tried on a different PC with Windows 7, same issue. ADB Loads and detects, but fastboot doesn't.
It shows under ADB Devices but when I type, adb reboot bootloader.
The phone goes into fastboot mode, but isn't detected when using command, fastboot devices.
Drivers and eveything is setup correct on it too.

Question Stuck on System Recovery, Redmi note 10, Orange fox custom recovery

Hi
I have a Redmi note 10, i unlocked the bootloader and tried to install the custom recovery Orange fox, i posted this question on the main Orange fox trhead but as i read its no longer being mantained, so i made a separate thread.
what i did is follow a tutorial in which i was instructed to dowload bot the Adb exe, and using the commands to flash the recovery img.
what i did step by step is the following:
1. Unlock bootloader
2. Start fast boot and connect my device to my PC using the original usb cable
3. Download Platform tools and Orange fox recovery
4. Copy the recovery image into the Platform tools folder
5. Type CMD to start the commands screen
6. Used the "fastboot devices" command to find my connected device
7. my device is a A/B type of device, so i typed the following command "fastboot flash boot_b recovery.img"
8. then i typed the command "fastboot reboot recovery"
up until this point it was working, then i was supposed to add the zip file into my phone so i could install it using orange fox
9. i typed "adb push "orange fox file location"/sdcard" and got the following string as an answer: adb.exe: push requires <source> and <destination> arguments
no matter how i tried to string the command i always got back this answer so i tried to manually move the zip file into the Fox folder and it allowed me to install it.
the problem is that im now stuck on recovery mode, cant leave that screen, cant even turn off my phone, i tried rebooting to fastboot, to recovery again, to system and it will always end on the recovery screen, attempted doing a factory reset but im still stuck on the recovery loop, i attempted to flash an stock rom but i was unable to do it, did i brick my phone? is there some way to solve it? would flashing a different custom recovery solve my issue?
Please any help would be appreciated.
if its of any help my device is a redmi note 10, MIUI was 12.5.5.0, global mojito, i ussed the latest version of orange fox when i attempted this

Categories

Resources