My Coolpad F1 8297W is bricked to the point where it will not power up.
It is recognised in SP Flash tools and I have tried to flash the ROMs below, with no success:
miui_fi_emjot_4.5.16_multi_v02_spflash
[YDSS]Coolpad_F1_8297W_wcdma_by_Soda
Both will run the download successfully, but will still not boot, and I haven't found any other ROMs with the scatter files.
Can anyone help?
ns.macd said:
My Coolpad F1 8297W is bricked to the point where it will not power up.
It is recognised in SP Flash tools and I have tried to flash the ROMs below, with no success:
miui_fi_emjot_4.5.16_multi_v02_spflash
[YDSS]Coolpad_F1_8297W_wcdma_by_Soda
Both will run the download successfully, but will still not boot, and I haven't found any other ROMs with the scatter files.
Can anyone help?
Click to expand...
Click to collapse
here is orig rom 4.2.2 with scatter file
https://drive.google.com/drive/u/0/folders/0B4huyVgvdssGMXFTRFJ0QmNoUGc
http://www.modaco.com/forums/topic/...eview-info-software-custom-roms/#entry2212206
https://bsp.needrom.com/2014/09/new-recovery.img
Thanks - Ran it through successfully with a full flash and connected it to the PC and can see the device manager constantly refreshing and beeping, but no activity on the phone itself - ie No battery charging sign etc and not detecting in Windows
I ran the RAM test in SP Flash Tools and all came back with no errors
ns.macd said:
Thanks - Ran it through successfully with a full flash and connected it to the PC and can see the device manager constantly refreshing and beeping, but no activity on the phone itself - ie No battery charging sign etc and not detecting in Windows
I ran the RAM test in SP Flash Tools and all came back with no errors
Click to expand...
Click to collapse
pull the battery otu, choose download, press all buttons on device and start, when process started release buttons and proceed..i tryed 5 times without battery and finally did it.. with flash tool. load scatter file and choose only download, after a minute green pass appears, disconnect phone, put battery in and boot, 10 minutes booting!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks - I have successfully flashed it this way many times and got the download to 100% with the green tick, the same as your screenshot, but it still will not boot or show any sign of activity with or without the battery (There is not even any sign that it is charging).
When plugged to the PC, device manager recognises that something is plugged in, but just disconnects and reconnects, without actually finding the phone.
Ran through successfully (on both download and also with format/download as per your screenshot,but the phone is still dead)
Related
I rooted my phone
I rooted the shell
I issued the commands to adb as per instruction.
Then i got these errors.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The phone rebooted automatically.
It flashes the android logo for a second and the reboots again.
so now it's stuck in that loop
even seus cannot restore it
Please help!
OmegaRED^ said:
I rooted my phone
I rooted the shell
I issued the commands to adb as per instruction.
Then i got these errors.
The phone rebooted automatically.
It flashes the android logo for a second and the reboots again.
so now it's stuck in that loop
even seus cannot restore it
Please help!
Click to expand...
Click to collapse
Did you try to leave all cables connected, remove battery, hold in the back button and reinsert battery? Should put you back in flash mode.
i think the problem caused as u didnot get ur battery filled more than 50 %
which cause the device java during installation to broke up
plz get the battery out for more than 30 min.
and then connect it while the phone connected to the charger
then remove the chrager and remove the battery again
leave it out for 30 sec. put the battery back wz ur fingure on the back key
and connect the usb cable
to enter flashing mode
flash ur device wz flashtool http://forum.xda-developers.com/showthread.php?t=825675
do not leave the back key , till the loader.sin >>>> flashed and started the another file to be flashed
god wz u
Will try this soon.
I can get into flash mode but Seus cannot identify the phone.
And the flash program hates my pc!! it wont detect the usb port of the device.
Dammit phone still won't flash.
Sorry Tripple post.
It flashed! thank you very much for your help.
Hello
Phone does not recognize the computer
After you install the Roman Donut HD
The program also flash tool to Aataraf phone
I hope the quick fix
ameer96 said:
Hello
Phone does not recognize the computer
After you install the Roman Donut HD
The program also flash tool to Aataraf phone
I hope the quick fix
Click to expand...
Click to collapse
I just ask, what the fu*k is Your question?
Make a choice, won't Your computer recognize the phone or the phone doesn't recognize the PC.
I think You're asking for the first thing, so on Your place I would check if USB debugging is enabled, if You changed the "Roman".
Also don't forget to check for drivers on Your PC.
And please, explain to me what "Aataraf" is.
Definition in the existing phone
And you do restore factory settings
The phone hanging on the word Sony Ericsson
And tried to install the original Roman road
Flash tool but the computer does not recognize the phone
But lighting is blinking when you press the back button
ameer96 said:
Definition in the existing phone
And you do restore factory settings
The phone hanging on the word Sony Ericsson
And tried to install the original Roman road
Flash tool but the computer does not recognize the phone
But lighting is blinking when you press the back button
Click to expand...
Click to collapse
Try SEUS and check the drivers on Your PC.
Besides...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried to re-install the definition but did not work the way
Where the solution
Can you give me your backup in the original rom
is hard do discover what he want to say, but if you cannot connect your phone to PC check if your drivers are installed corretly. Install SE PC Compaion or SEUS. if you want to use flashtool make sure you have ADB Drivers installed ( you should have it in "drivers"folder, and run the setup wizard) and USB Debug is turned on on your phone.
The battery empty, but when connect the phone electricity are not shipping
just connect it and wait few minutes. it should boot up but it will take a while. It is possible that LED indicator is not turned on. just wait cca 30 minutes.
So, I've bought a Xiaomi Mi Pad 3 with a Chinese Rom, and I was following a tutorial to flash a new rom into it.
I basically did the following:
Installed MediaTek Drivers on PC
Opened "Smart Phone Flash Tool"
Specified Download-Agent as DA_SWSEC.bin and Scatter-loading File as the ROM
Unchecked preloader and clicked on "Download"
Connected the Xiaomi Mi Pad 3 to the computer while pressing Volume Down
Then, at this point, the computer crashed with a blue screen of death with the error "BUGCODE_USB_DRIVER". Here is the diagnosis of the error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After that, the Mi Pad won't turn on, won't respond to any button and is not recognized by the computer.... I think I might have hard-bricked it.
I've found a tutorial about recovering a Mi Pad 1, but one of the steps is to make a bridge in the SD Card slot, which Mi Pad 3 don't seem to have.
I'm a developer myself, I know my way on things, I have a VM Linux, I'm willing to open the tablet and do whathever it costs to recover it.
Please, what can I do??
Please, anyone?
I FUC*ING RECOVERED MY FUC*ING TABLET. FUC* YEAH!!!!!!!!!!!!!!
I don't know exactly what it was, but I kinda did the following:
- Installed the latest SP Flash tool from spflashtool.com on my PC
- Installed Mi PC Suite for drivers and such
- To help debug, I had a freeware called "Free Device Monitoring Studio", to better understand what's going on on my USB ports
- I was playing a little with the connection/desconnection of the device on my computer, trying to understand how it was. I saw that Kali Linux running under Oracle VM kinda recognized it as a Mediatek device, but couldn't do anything else than that. With that info, my hopes went a little higher, because it wasn't completely dead after all.
- I opened Flash tool, configured it to used the same ROM and files I was using when I bricked it, because I'm pretty sure they weren't the cause of the brick and clicked "Download"
- Then I began messing with the tablet trying to make it be recognized by SP Flash Tool, upon turning it on and off and switching USB ports and connecting them directly to the motherboard USB ports instead of the frontal USB ports
- Then at one point it suddenly recognized and started downloading and flashing the new ROM. I faced some errors but with Format all + Download and having to disconnect/reconnect the batery to make it recognizable again and some little tweaks here and there, it ended up working.
My tablet is working fine now
I was installing root to my cell phone, the installation everything fine, but when I was installing the original recovery, I accidentally moved the USB cable and it was disconnected, it stayed in the red bar of the flash tool, I gave it in "stop" and try to do it again, now the sp flash tool does not recognize it, but windows recognize the device as "Mediatek DA USB VCOM (Android) (COMX)" where X is a number.
I've read through other topics that keep the Vol+ works, but it does not work with me, or I do not know if I'm doing it right.
I have not removed the battery because I do not know how to open the cell phone.
In the sh flash tool, I use: "Download Only"
Sorry for my english.
EDIT:
I open the phone, quit battery, put again, and sp flash tool detect the device again
leo318x said:
I was installing root to my cell phone, the installation everything fine, but when I was installing the original recovery, I accidentally moved the USB cable and it was disconnected, it stayed in the red bar of the flash tool, I gave it in "stop" and try to do it again, now the sp flash tool does not recognize it, but windows recognize the device as "Mediatek DA USB VCOM (Android) (COMX)" where X is a number.
I've read through other topics that keep the Vol+ works, but it does not work with me, or I do not know if I'm doing it right.
I have not removed the battery because I do not know how to open the cell phone.
In the sh flash tool, I use: "Download Only"
Sorry for my english.
EDIT:
I open the phone, quit battery, put again, and sp flash tool detect the device again
Click to expand...
Click to collapse
How did you manage to open the phone? When I tried it it felt like something was going to break.
MrGoatsy said:
How did you manage to open the phone? When I tried it it felt like something was going to break.
Click to expand...
Click to collapse
I watch the next videos:
To open cellphone: (flat screwdriver and a pair of tweezers, look for a screwdriver as flat as possible, see the images)
https://youtu.be/l-KxuFfv7rk?t=2m26s
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Quit Battery:
https://www.youtube.com/watch?v=4ehYF-zFDAo
My Duel2 was stucked at FastBoot after using RSA yesterday..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This worked on my Duel 2 - GLOBAL (12.5.188ST)
ROM downloaded from:
romprovider.com/lenovo-legion-2-pro-firmware
(theres also a EEA ROM you can download)
Or you can download your ROM from the RSA app by entering your IMEI
Heres what I did:
*Install Qualcomm USB Driver
(Https://gsmusbdriver.com/install-qualcomm-usb-driver) then restart PC
*Install QPST 2.7.496
(http://qpsttool.com/qpst-tool-v2-7-496)
After installing qpst, locate its folder on your pc, mines on C: Program Files (x86)/ Qualcomm/ QPST/ bin... then open the QFil file in the bin folder.
On QFil:
*select Flat Build
*On the Programmer Path, click Browse, select where your extracted ROM folder is, then select " prog_firehose_ddr.elf " file then click open.
*Click Load XML, and select ALL .xml files
*Select ALL patch
*on your powered OFF Duel 2, press & hold POWER, +VOL, -VOL simultaneously, when the Legion Logo flashes, plug your USB cable on the Left side Type-C port
*On QFil, click Select Port and select your Phone if it doesnt automatically selected when you plug it.
*Click DOWNLOAD
"The QFil app on the QPST folder fixed the error The system cannot find the file specified"
Hope this helps
i was stuck in fastboot for the last 2 days. the backup i had saved using miracle thunder box didnt work and neither did this. But it got a lot further in the boot sequence before resetting lol. So i took the backup i had of my phone, fastboot flashed the persist image over and it booted right up. not sure if it was just coincidence but it reset 3-4 times on me before flashing the image over. Doesnt help those who are already screwed but helps others prepare before attempting an update
ฉันลองทุกขั้นตอนแล้ว แต่ไม่ได้ผล โปรดช่วยฉันด้วย
thank you that was really helpful i didnt know about select all i was selecting 1 after another thank you again for the detailed steps