Hey Guys,
I'm in need of some really n00b friendly advice.
When you flash a new ROM (i.e. CM9) in CWM the tutorials tell you to flash the file named Update.zip. My problem is that I can't seem to find one in the zip file I downloaded for my xperia mini.
I downloaded FXP131, and found the zip file to contain a boot.img, which will be the kernel. And 2 other folders named META-INF and System.
I know how to flash the kernel and expect it was just left in there for easy transportation.
But where in the world is 'update.zip'?
Am I meant to unpackage the kernel then re-zip the META-INF and System folder and then call that 'Update.zip'?
I've flashed roms for some of my other devices before, but they've always used flashtool or samsungs flashtool.
Please help me guys, I don't like sounding this inexperienced
update.zip
I'm wondering if the ROM I am trying to flash needs to be renamed as update.zip in order to work. It is krook's v.6 of JB for the Lenovo K1 tablet. Since the download site has to distinguish between wifi and 3G versions, as well as nvflash versions there are a number of different filenames, however does it need to be renamed after putting it on my SD card?
Generally speaking "update.zip" is used as a generic name. For example the update.zip I just flashed is actually named "rascarlo_maguro_ota_2012-11-01.zip". When you flash a custom ROM in a custom recovery you should be able to browse & flash whichever file you need.
The FXP131.zip file that contains the boot.img and 2 other folders named META-INF and System is the "update.zip"
solved
My problem was an incomplete download. I compared file sizes, and checked md5sums and determined the correct ROM and it is now in the middle of finishing the upgrade/optimization process.
Thx
I have CM 10.1.3 installed on my i9100 and I flashed the ZIP file from the thread at the bottom of this post through CWM Recovery. Now, my phone is stuck at the boot screen.
I would realllly hate to reinstall my ROM and all apps, so I'd just like to fix the problem. The ZIP makes changes to the 'SurfaceFlinger' library. Could I reflash a ZIP of the original library? Any idea how I could get the file?
surfaceflinger-fix.zip
http://forum.xda-developers.com/galaxy-nexus/development/fix-lag-fix-cm10-based-roms-cm10-t1875490
SOLUTION:
The only file that surfaceflinger-fix.zip affects is libsurfaceflinger.so. So, I tried extracting this file from a copy of the CM 10.1 zip file. libsurfaceflinger.so is located in system/lib. I then created a flashable ZIP using this guide:
http://forum.xda-developers.com/showthread.php?t=2163974
I flashed the ZIP after pushing it via 'ADB push sample.zip /sdcard'. I installed the ZIP via CWM Recovery. Clear caches, reboot. STILL DIDN"T WORK.
So then I took a look a look in the META-INF folder of surfaceflinger-fix.zip and noticed some additional files that I did not have in my custom 'sample.zip'. So, I just took the libsurfaceflinger.so file that I extracted from CM 10.1 and put this file in surfaceflinger-fix.zip, replacing the original one in the ZIP file. Pushed this ZIP via ADB, everything works.
Had you taken a backup prior to flashing the zip it would've been five minutes work fixing your problem, I'm sure there's a lesson for all of us there.
ghostofcain said:
Had you taken a backup prior to flashing the zip it would've been five minutes work fixing your problem, I'm sure there's a lesson for all of us there.
Click to expand...
Click to collapse
This was definitely easier and this is a better fix than using a backup, but I absolutely agree with you.
I've nandroid backup of my stock rom. and i want to make cwm flashable zip using kitchen. What file should I copy in the working folder of kitchen?
I only copied system and boot.img file. Should i copy anything else?
These are the files
boot.img
cache.ext4
data.ext4
nandroid.md5
recovery.txt
system.ext4
uboot.img
Click to expand...
Click to collapse
mrtaim3 said:
I've nandroid backup of my stock rom. and i want to make cwm flashable zip using kitchen. What file should I copy in the working folder of kitchen?
I only copied system and boot.img file. Should i copy anything else?
These are the files
Click to expand...
Click to collapse
The steps can vary somewhat depending on the device. I'm assuming it's some sort of a Chinese device, most likely a tablet, with the uboot file... What's wrong with just having the nandroid? It's not like you can't share that with others if you're needing to.
es0tericcha0s said:
The steps can vary somewhat depending on the device. I'm assuming it's some sort of a Chinese device, most likely a tablet, with the uboot file... What's wrong with just having the nandroid? It's not like you can't share that with others if you're needing to.
Click to expand...
Click to collapse
Its not about sharing. I've just bricket my phone. But i had a nandroid backup. I restored it but nothing happened. So i made a cwm flashable zip using kitchen and included only system.ext4 file and boot.img file. and i stuck at boot loop. I think i'm doing something wrong. i just wanted to ask if uboot.img is essential for cwm flashable zip?
mrtaim3 said:
Its not about sharing. I've just bricket my phone. But i had a nandroid backup. I restored it but nothing happened. So i made a cwm flashable zip using kitchen and included only system.ext4 file and boot.img file. and i stuck at boot loop. I think i'm doing something wrong. i just wanted to ask if uboot.img is essential for cwm flashable zip?
Click to expand...
Click to collapse
Well, if a nandroid didn't work, then not likely that making a flashable CWM zip with the same files would make any difference. You might just need to flash the stock firmware and start over.
I have a system.img file, which I extracted from a 20J KDZ. I would now like to convert it into a flashable zip. I have 2 reasons for this. One, I dont want to have to use LGUP to revert my phone to a 100% stock system. It is much easier to just flash a zip of the system partition. Two, I would like to get into modding and ROM development. I believe that it is best to start from pure stock and make changes from there, instead of basing your work off of something that someone else has already modded.
I found these threads but they're a bit old (Lollipop):
1. http://forum.xda-developers.com/lg-v10/development/lg-h901-stock-img-files-boot-recovery-t3238638
2. http://forum.xda-developers.com/tmobile-lg-v10/development/lg-h901-stock-images-device-restore-t3241170
In one of them a member provided img's for recovery, boot, and system. In the other thread flashable zips of these img's were posted. These are for the Tmo v10. So it's not a matter of whether it can be done, but how. What tools are needed?
I downloaded the zip from one of the aforementioned threads, deleted the boot.img, replaced his system.img with mine, edited updater-script, and zipped up the meta-inf and system.img files with 7zip. I also checked to be sure that the block to be flashed was correct, it is the same (even though my img is for MM). I tried flashing with TWRP, I immediately get an error code 6.
What should I do?
Just off the subject slightly...but Eliminater74 already has a flashable zip (thought TWRP) for the 20J release. Its a 2 Part System.
Eliminator74's zip is modified. I want to take a 100% pure stock system.img (extracted from stock firmware) and put it into a zip that can be flashed in TWRP. When I say stock, that's what I mean. No root, no Xposed, no BusyBox, nothing. This has already been done for Lollipop on the v10, but I have MM. I have already explained why I want to do this. I'm currently looking into whether Superr's Kitchen can accomplish this.
He has a Fully Stock 20J release..just gotta read the thread..
AnonVendetta said:
I have a system.img file, which I extracted from a 20J KDZ. I would now like to convert it into a flashable zip. I have 2 reasons for this. One, I dont want to have to use LGUP to revert my phone to a 100% stock system. It is much easier to just flash a zip of the system partition. Two, I would like to get into modding and ROM development. I believe that it is best to start from pure stock and make changes from there, instead of basing your work off of something that someone else has already modded.
I found these threads but they're a bit old (Lollipop):
1. http://forum.xda-developers.com/lg-v10/development/lg-h901-stock-img-files-boot-recovery-t3238638
2. http://forum.xda-developers.com/tmobile-lg-v10/development/lg-h901-stock-images-device-restore-t3241170
In one of them a member provided img's for recovery, boot, and system. In the other thread flashable zips of these img's were posted. These are for the Tmo v10. So it's not a matter of whether it can be done, but how. What tools are needed?
I downloaded the zip from one of the aforementioned threads, deleted the boot.img, replaced his system.img with mine, edited updater-script, and zipped up the meta-inf and system.img files with 7zip. I also checked to be sure that the block to be flashed was correct, it is the same (even though my img is for MM). I tried flashing with TWRP, I immediately get an error code 6.
What should I do?
Click to expand...
Click to collapse
What tool did you use to extract the KDZ? I am trying to get a stock boot.img for the H901J build and I cannot seem to find it. I used the WindowsLGFirmwareExtract 1.2.5.0 release and all I see are a ton of .bin files and system.img. Is boot.img inside system.img?
@Sippi4x4man: I also used WindowsLGFirmwareExtract. Inside the KDZ there is a DZ and DLL file. Just extract the DZ, then you see lots of BINs. The system.img is split up (since it's around 4GB alone), but the tool can combine the pieces into one file. I was able to figure out how to manually flash the IMG, by running a dd command with TWRP's terminal emulator.
dd if=/external_sd/system.img of=/dev/block/platform/f9824900.sdhci/by-name/system
It takes a few minutes to finish, followed by a message that says no more space is available (I guess /system got filled up). I think when you dd anything you are copying both free and used space, since an IMG is usually just a (sometimes raw) disk image. TWRP will also initially say that no system is installed, I just ignored it, the device boots fine, everything is pure stock, no issues at all. System is mountable after subsequent boots into recovery. I used Magisk and the phh Superuser Magisk module to gain root without modding system partition, and the Magisk version of Xposed. But I would still like to create a flashable zip to automate this. If I figure it out I don't mind uploading it so the community can benefit.
As for the stock boot.img, I would imagine that the boot.bin inside the DZ is probably what you're after. The file size seems about right. However, I tried renaming boot.bin to boot.img and flashing from TWRP. Device wouldn't boot. So maybe there is some other conversion process that needs to be done. I can't think of any other way to obtain a pure stock boot image, extracting it from stock firmware seems like a sure way. If you ever figure it out then please provide a copy. Make sure it isn't patched by SuperSU, Xposed, Magisk, etc. I could maybe merge it into a stock zip.
AnonVendetta said:
@Sippi4x4man: I also used WindowsLGFirmwareExtract. Inside the KDZ there is a DZ and DLL file. Just extract the DZ, then you see lots of BINs. The system.img is split up (since it's around 4GB alone), but the tool can combine the pieces into one file. I was able to figure out how to manually flash the IMG, by running a dd command with TWRP's terminal emulator.
dd if=/external_sd/system.img of=/dev/block/platform/f9824900.sdhci/by-name/system
It takes a few minutes to finish, followed by a message that says no more space is available (I guess /system got filled up). I think when you dd anything you are copying both free and used space, since an IMG is usually just a (sometimes raw) disk image. TWRP will also initially say that no system is installed, I just ignored it, the device boots fine, everything is pure stock, no issues at all. System is mountable after subsequent boots into recovery. I used Magisk and the phh Superuser Magisk module to gain root without modding system partition, and the Magisk version of Xposed. But I would still like to create a flashable zip to automate this. If I figure it out I don't mind uploading it so the community can benefit.
As for the stock boot.img, I would imagine that the boot.bin inside the DZ is probably what you're after. The file size seems about right. However, I tried renaming boot.bin to boot.img and flashing from TWRP. Device wouldn't boot. So maybe there is some other conversion process that needs to be done. I can't think of any other way to obtain a pure stock boot image, extracting it from stock firmware seems like a sure way. If you ever figure it out then please provide a copy. Make sure it isn't patched by SuperSU, Xposed, Magisk, etc. I could maybe merge it into a stock zip.
Click to expand...
Click to collapse
It's been a while from this post... But I'm looking after the same goal you were and got the same error 6 trying the same things you described in your previous posts. Despite of these long 4 years, let me try: did you finally achieve to make the flashable zip with system.img?
I do not own an LG V10 anymore.....it is the most garbage phone I've ever had.
I now use SuperR's Kitchen to create flashable zip from system.img. Works like a charm every time. Downside is that you need a PC to use it. It works for all phones (but you must also have an unlocked bootloader and custom recovery, or you will not be able to flash the zip). There are both free and donate versions, both will work fine.
AnonVendetta said:
I do not own an LG V10 anymore.....it is the most garbage phone I've ever had.
I now use SuperR's Kitchen to create flashable zip from system.img. Works like a charm every time. Downside is that you need a PC to use it. It works for all phones (but you must also have an unlocked bootloader and custom recovery, or you will not be able to flash the zip). There are both free and donate versions, both will work fine.
Click to expand...
Click to collapse
Thank you for your reply. My device is Lenovo Z6 Pro but I thought this wouldn't make a difference.
Just to be sure, what you get with SuperR's Kitchen is a zip including system.img file and not the /system folder, right? Thank you in advance.
Edit: I had tried with other kitchen softwares with no success but SuperR's Kitchen did the job as you said, like a charm. Tons of thanks.
@descarao81: No, SuperR's Kitchen does not include system.img/boot.img, you must provide them yourself. They are device-specific. And system.img is a very large file, so it cannot reasonably be included in the Kitchen zip.
Yeah, maybe I wasn't clear, I meant if the resultant zip would include those raw image files being the original image files provided by the user. It's clear now. Thank you.
Here is how to do it...
1. Go to:
https://forum.xda-developers.com/tm.../lg-h901-stock-images-device-restore-t3241170
Download from the link he provided.
2. Extract the .zip file that you downloaded.
3. Make a new folder called "rom"
4. Copy the META-INF folder from the folder you extracted and place it into the "rom" folder.
5. Download any other flashable rom for your device. Extract it.
6. Go to {EXTRACTED_FLASHABLE_ROM}\META-INF\com\google\android\update-binary in your flashable extracted rom folder. Copy the "update-binary" . Got to the "rom" folder and go to META-INF\com\google\android. Delete the update-binary there and replace it with the one you have copied.
7. Now copy the boot.img from the other rom that is for your device. And place it into the "rom" folder.
8. Now Finally Compress the all the files.
9. Now you will have a flashable system.img.
10. Go to TWRP and flash the .zip that you have just made!
Upytry2 said:
Here is how to do it...
1. Go to:
https://forum.xda-developers.com/tm.../lg-h901-stock-images-device-restore-t3241170
Download from the link he provided.
2. Extract the .zip file that you downloaded.
3. Make a new folder called "rom"
4. Copy the META-INF folder from the folder you extracted and place it into the "rom" folder.
5. Download any other flashable rom for your device. Extract it.
6. Go to {EXTRACTED_FLASHABLE_ROM}\META-INF\com\google\android\update-binary in your flashable extracted rom folder. Copy the "update-binary" . Got to the "rom" folder and go to META-INF\com\google\android. Delete the update-binary there and replace it with the one you have copied.
7. Now copy the boot.img from the other rom that is for your device. And place it into the "rom" folder.
8. Now Finally Compress the all the files.
9. Now you will have a flashable system.img.
10. Go to TWRP and flash the .zip that you have just made!
Click to expand...
Click to collapse
Trying that exactly when im home! Thank you!