Hello,
I tried to install magisk on my kenzo but after flashing magisk v8 I flashed systemless SuperSU but it was unable to detect magisk.img I also tried flashing phh's supersu and systemless xposed but they also didn't succeeded as none of them were able to detect magisk.img.Please suggest me a solution I m on global stable 8.0.5.0
Thankx in Advance
@bHi71 said:
Hello,
I tried to install magisk on my kenzo but after flashing magisk v8 I flashed systemless SuperSU but it was unable to detect magisk.img I also tried flashing phh's supersu and systemless xposed but they also didn't succeeded as none of them were able to detect magisk.img.Please suggest me a solution I m on global stable 8.0.5.0
Thankx in Advance
Click to expand...
Click to collapse
If you try searching forums you will find that there are already guides available. Go here, read second post.
Related
Hey guys, someone please help me out to find any thread on systemless root and xposed for kenzo, i did searched lot, but no luck, if its there then plz provide the link..
c_/\/\_k said:
Hey guys, someone please help me out to find any thread on systemless root and xposed for kenzo, i did searched lot, but no luck, if its there then plz provide the link..
Click to expand...
Click to collapse
For systemless root all you need to do is flash latest SuperSU v2.78 SR1 in TWRP. Make sure your rom is not pre-rooted for it to work. Or no other root method used. Need Marshmallow rom.
mGforCe said:
There seems to be some discussion and success for system less xposed for MIUI MM
READ HERE
http://forum.xda-developers.com/showthread.php?p=68701189
PS: Untested by me.
Sent from my mobile device
Click to expand...
Click to collapse
Haven't used the above myself because don't want to change to phh's superuser and don't need Magisk.
If you just need xposed (but not systemless) see this thread.
If your trying to use suhide, the above systemless xposed may not work as you need a specific xposed for that.
corkiejp said:
For systemless root all you need to do is flash latest SuperSU v2.78 SR1 in TWRP. Make sure your rom is not pre-rooted for it to work. Or no other root method used. Need Marshmallow rom.
Haven't used the above myself because don't want to change to phh's superuser and don't need Magisk.
If you just need xposed (but not systemless) see this thread.
If your trying to use suhide, the above systemless xposed may not work as you need a specific xposed for that.
Click to expand...
Click to collapse
so basically superSu will be replace by phh su, bro my concern is i have to flash everything (approx 6 zips) everytime after flashing OTA or recovery rom, as they said systemless root or xposed doesnt modify system, so i hope it will be remain in ROM even after flashing recovery ROM or ota, Now i m thinking not to flash beta's everyweek, i m on beta bcoz of MM.
@c_/\/\_k
I believe they would have to be flashed after every update. Not worth the trouble and If it is for "Pokemon Go", i don't believe it works for it anymore.
Hi Friends
Could you kindly assist me in having to install root on my Redmi Note 3 pro running AOSP 8.0.0 ROM .. I have tried many ways to install root but it does not seem to work at all. I have a ZCX TWRP recovery and it has a built in SuperSU zip but when I install it, it says done and when I boot the phone, the SuperSU app is not installed and it says my device is not rooted. Please help me out on this . Thank you!
try to use magisk
Oreo needs SuperSU v2.82-SR4, check the supersu thread!
Yudhz® said:
try to use magisk
Click to expand...
Click to collapse
Thanks .. rooting with Magisk worked!
After i switched from miui 9 to pixel experience rom,
My phone was unrooted. I tried to root it again using super su and magisk, but it didn't work. Please help.?
Pranavsingal said:
After i switched from miui 9 to pixel experience rom,
My phone was unrooted. I tried to root it again using super su and magisk, but it didn't work. Please help.
Click to expand...
Click to collapse
SuperSU doesn't work anymore.
Update your recovery to one which is Treble compatible and use the latest beta version of Magisk.
It should all be explained in the Pixel Experience ROM thread
Can you give me the link to that thread.....
Try this recovery;it works for treble and non-treble roms so you wont bother changing recoveries again: (https://forum.xda-developers.com/re.../recovery-orangefox-recovery-project-t3775933)
And try this magisk for treble as well: (https://androidfilehost.com/?fid=890129502657597190)
Make a clean flash of your rom, first flash firmware if needed then rom then gapps. I would advice you to reboot after that setup your phone then reboot to recovery and flash magisk. Your choice good luck.
RapGodS said:
Try this recovery;it works for treble and non-treble roms so you wont bother changing recoveries again: (https://forum.xda-developers.com/re.../recovery-orangefox-recovery-project-t3775933)
And try this magisk for treble as well: (https://androidfilehost.com/?fid=890129502657597190)
Make a clean flash of your rom, first flash firmware if needed then rom then gapps. I would advice you to reboot after that setup your phone then reboot to recovery and flash magisk. Your choice good luck.
Click to expand...
Click to collapse
Thanks buddy...
Safety net is failing in stock miui rom 10.3.8.0
The phone is not rooted,no custom recovery installed, just a plain old stock miui rom
Any help, please??
thisisarjun said:
Safety net is failing in stock miui rom 10.3.8.0
The phone is not rooted,no custom recovery installed, just a plain old stock miui rom
Any help, please??
Click to expand...
Click to collapse
I have exactly the same problem. I have not flashed anything, i only unlocked bootloader
DaveCZ said:
I have exactly the same problem. I have not flashed anything, i only unlocked bootloader
Click to expand...
Click to collapse
U will have to flash magisk in order to pass safety net. That's the only way...
thisisarjun said:
U will have to flash magisk in order to pass safety net. That's the only way...
Click to expand...
Click to collapse
How's that the only way? What's the cause? Anyway can you kindly provide me with a guide on how to install magisk on MIUI 11 A9?
Thanks.
Can you please try with the latest/different version of Safety Net checker app?
I have come across many posts like these where a small bug in the app can cause it to show as "FAIL".
DaveCZ said:
How's that the only way? What's the cause? Anyway can you kindly provide me with a guide on how to install magisk on MIUI 11 A9?
Thanks.
Click to expand...
Click to collapse
Install twrp and then install magisk canary apk and then install the canary magisk version from the app...
thisisarjun said:
Install twrp and then install magisk canary apk and then install the canary magisk version from the app...
Click to expand...
Click to collapse
Does it necessary have to be Magisk Canary? Also which TWRP do you recommend? The official one from TWRP.me or some other.
PS: The installation of TWRP is through cmd with command „fastboot flash recovery *file_name*” right?
Thanks for your help and time
Hello guys. My Pocophone F1 is good with latest xiaomi.eu build Android Pie MIUI 11.0.5.0 until I flashed Android 10 MIUI 11.0.4.0 on my phone. Latest Magisk 20.3 wont install after I flashed it. I tried flashing Magisk 19.3 but it ended bootlooping my device. Any solution from xda devs?
Stock rom wont boot either after flashing any magisk version
Try magisk canary build, works fine here..
zerodeus94 said:
Hello guys. My Pocophone F1 is good with latest xiaomi.eu build Android Pie MIUI 11.0.5.0 until I flashed Android 10 MIUI 11.0.4.0 on my phone. Latest Magisk 20.3 wont install after I flashed it. I tried flashing Magisk 19.3 but it ended bootlooping my device. Any solution from xda devs?
Stock rom wont boot either after flashing any magisk version
Click to expand...
Click to collapse
+1
---------- Post added at 08:32 AM ---------- Previous post was at 08:29 AM ----------
Please somebody write step by step root 11.04.0
I try everything
Uninstall previous Magisk and then install again. You might need to use the Canary version. Please bear in mind that has a few cosmetic issues...
Sent from my Galaxy Tab S5e using XDA Labs
guhvanoh said:
Uninstall previous Magisk and then install again. You might need to use the Canary version. Please bear in mind that has a few cosmetic issues...
Click to expand...
Click to collapse
Again nothing , use magisk 20.3
Download magisk unistaller from magisk Web and flash it, then clean dalvich cache and cache, then reboot to system it Will take a minute.
After download magisk 20.3 from magisk web, reboot to twrp and flash it. If you cant install modules, reinstall magisk with direct install (recommended).
Its all, good luck.
Enviado desde mi POCOPHONE F1 mediante Tapatalk
zerodeus94 said:
Hello guys. My Pocophone F1 is good with latest xiaomi.eu build Android Pie MIUI 11.0.5.0 until I flashed Android 10 MIUI 11.0.4.0 on my phone. Latest Magisk 20.3 wont install after I flashed it. I tried flashing Magisk 19.3 but it ended bootlooping my device. Any solution from xda devs?
Stock rom wont boot either after flashing any magisk version
Click to expand...
Click to collapse
If you want to use Xiaomi.eu build, I would suggest you to flash Miglobe rom( it is based on xiaomi.eu builds). I am currently using it with magisk 20.3 and it passes safety net also.
molina22 said:
Download magisk unistaller from magisk Web and flash it, then clean dalvich cache and cache, then reboot to system it Will take a minute.
After download magisk 20.3 from magisk web, reboot to twrp and flash it. If you cant install modules, reinstall magisk with direct install (recommended).
Its all, good luck.
Enviado desde mi POCOPHONE F1 mediante Tapatalk
Click to expand...
Click to collapse
I tried this today and it didn't work.
patch magisk zip with the boot.img I provided. Then flash the new boot.img in twrpn as boot.
https://drive.google.com/open?id=1Gn6jN1QR87ACH0Z3SjQVjlXqUD62eygd
zerodeus94 said:
Hello guys. My Pocophone F1 is good with latest xiaomi.eu build Android Pie MIUI 11.0.5.0 until I flashed Android 10 MIUI 11.0.4.0 on my phone. Latest Magisk 20.3 wont install after I flashed it. I tried flashing Magisk 19.3 but it ended bootlooping my device. Any solution from xda devs?
Stock rom wont boot either after flashing any magisk version
Click to expand...
Click to collapse
hey OP, any solution? I am in the same boat too. Just yesterday updated to 11.0.4.0 Android 10 on my Poco using TWRP, boot fine. Then flash Magisk 20.3, my Poco wont boot
Solution
zerodeus94 said:
Hello guys. My Pocophone F1 is good with latest xiaomi.eu build Android Pie MIUI 11.0.5.0 until I flashed Android 10 MIUI 11.0.4.0 on my phone. Latest Magisk 20.3 wont install after I flashed it. I tried flashing Magisk 19.3 but it ended bootlooping my device. Any solution from xda devs?
Stock rom wont boot either after flashing any magisk version
Click to expand...
Click to collapse
ma ismuka said:
hey OP, any solution? I am in the same boat too. Just yesterday updated to 11.0.4.0 Android 10 on my Poco using TWRP, boot fine. Then flash Magisk 20.3, my Poco wont boot
Click to expand...
Click to collapse
Hey there.
I also had the same problem as you guys. Just updated my Xiaomi Pocophone F1 from Android 9 (rooted) to Android 10, dirty flash style. Usually, when you flash the ROM, you need to flash the Magisk again. So I did that on Android 10 ROM, then I got bootloop.
Fortunately, I've found a solution. I just followed the guy post below.
molina22 said:
Download magisk unistaller from magisk Web and flash it, then clean dalvich cache and cache, then reboot to system it Will take a minute.
After download magisk 20.3 from magisk web, reboot to twrp and flash it. If you cant install modules, reinstall magisk with direct install (recommended).
Its all, good luck.
Enviado desde mi POCOPHONE F1 mediante Tapatalk
Click to expand...
Click to collapse
I use the stock ROM and Official TWRP 3.3.0-0 for the recovery mode.
The steps I've taken to solve the problem (I assume you're already on Android 10):
Flash the Magisk Uninstaller 20200110
Wipe cache/dalvik
Reboot to system (the system should reboot successfully)
Reboot to recovery
Flash Magisk v20.3
Reboot to system
Done
The recovery will be keep replacing with the stock one. So, don't forget to flash the TWRP before booting into recovery mode, until you successfully rooted the phone.
I hope this would help you guys to solve the problem.
Hello
You can install miui 11.0.4.0 with magisk preinstalled from here:
https://mi-globe.com/miui-firmware-rom-builder-features/76/
Flash it via twrp. Recommended (probably must) format system and data before flashing.
stuck on boot menu poco f1
zerodeus94 said:
Hello guys. My Pocophone F1 is good with latest xiaomi.eu build Android Pie MIUI 11.0.5.0 until I flashed Android 10 MIUI 11.0.4.0 on my phone. Latest Magisk 20.3 wont install after I flashed it. I tried flashing Magisk 19.3 but it ended bootlooping my device. Any solution from xda devs?
Stock rom wont boot either after flashing any magisk version
Click to expand...
Click to collapse
after flashing this miui 11 my phone is in boot menu...not connecting to pc and fastboot mode is not coming also twrp not coming. bootloader unlock sign is not showing too.. what should i do??