Hey friends i was able to unlock bootloader of my REDMI NOTE 3 OFFICIALLY.
I wan to root the device and install TWRP but for tat i have to connect my phone in fastboot mode.
The thing is phone is recognised as an adb device when it is on but after putting the phone in fastboot mode my laptop is not showing in cmd after " fastboot devices" command
plz help if anyne know how to fix this.
How are you putting it in fastboot mode?
did you already install correct driver in your pc?
you can try to instal latest mi pc suite which will help you to instal correct driver for your phone.
If you're already success unlocking with official way..then it's mean your fastboot driver already correct (if you're using the same computer when you're unlocking before)
Maybe i think you're missed something to put your phone into fastboot mode..
First way you can go into fastboot mode with ADB command while your phone already ON, just typing command "adb reboot bootloader" then enter..your phone will reboot into fastboot mode
Second way to go into fastboot mode firstly you must turn off your phone..just wait until that phone is truely OFF..
then press and hold volume down button..then followed with pressing and hold power button..your phone will booting into fastboot mode.
Related
Hi
I sat down for three hours yesterday trying to get fastboot to recognise my device. I have ADB and fastboot files on my Windows 10, and I have the Sony Xperia m4 drivers downloaded.
When my device is powered off, I press and hold volume up, and insert usb cable witch is connected to my computer.
When typing Fastboot devices, the cmd prompt doesn't give me any connected devices...
Is there any installer for the correct drivers and is there any magic trick to manually enter bootloader mode.
I have also tried the Fastboot Software and I still can't enter fastboot mode.
Ok, fixed it
I used these files
https://mega.nz/#F!Ow5BEDgL!kOh2PZalG5WRzjQFnIZJ2w
that where in this thread
http://forum.xda-developers.com/m4-aqua/development/root-xm4aqua-e2303-bolek-t3340399
1. Ran rootkit rootkitXperia_E23xx_26.1.X.3.xxx
2. Ran Recovery
Works like a charm!
LOVE IT
Peace brothers
I am having a REAL BUGGER of a time with my Xiaomi Redmi Note 3 Pro (Snapdragon)!
1. It is not recognized by ADB in Fastboot mode.
2. I suspect it shipped wit a vendor ROM, and I'm trying to flash latest Official MIUI Global Dev (Marshmallow) ROM, but I keep getting errors in MI Flash (screenshot attached).
3. I want to Flash TWRP, BUT ADB isn't working, AND I cannot get to the download page for the cracked bootloader.
4. Seriously considering Resurrection Remix ROM, instead, but most of the above issues still apply.
I am NOT new to custom recoveries, flashing ROMS, ADB etc, BUT I am dealing with a new PC (Windows 10 Home, 64 bit, like my old (dead) laptop), and I'm new to this device.
PLEASE HELP. (Quite frustrated)
Fastboot won't recognize adb commands you have to use fastboot.
What you can try is booting into emergency download mode and using my flash to flash it from there. I think it's " adb reboot edl" while the device is on with USB debugging or using the mi updater app ( tap the three dots I think).
I think that this is not the correct section for your question, and i dont know the procedure that you follow but try to follow this procedure:
-Connect the phone at pc with USB cable
-Make sure that debug mode and OEM unlock was abilitate in dev settings
-Copy twrp.img in adb folder
-Shut down the phone and press power botton and - vol buttons for enter in fastboot mode
-Run this commands by terminal open in adb folder
fastboot devices
-If fastboot recognize correctly the device run this command
fastboot fash recovery nameoftwrp.img
-After reboot the device with this command
fastboot reboot
When the phone reboot press immediatily vol + for enter in twrp
Good luck
GOT IT! FINALLY!
-I finally got ADB to connect, and was able to enter EDL through ADB.
-Re-downloaded ROM from web.
-Re-extracted.
-FLASHED SUCCESSFULLY!
-SETUP COMPLETED SUCCESSFULLY!
-YAY!
(I think the original download was corrupted, somehow.)
I was rooting my oneplus x.
When phone was in fastboot mode.
While entering command fastboot OEM unlock
Cmd is saying "okay" but phone still in fastboot mode.
Need help
I need to root my phone
Are you tried reboot normally? If you have lost adb connection just hold the power+vol up+vol down at same time until device reboot normally
When I'm try to boot in fastboot mode the fastboot mode (volume down+power) will only display for about 10 seconds and then it will reboots itself into charging mode. doesn't matter if i use the key, or even use adb commands to get there. it will still reboot itself in short period of time.
why is this happening? i just want to unlock my bootloader thats all...
Please help me... thanks in advance....
Smart Sujoy said:
When I'm try to boot in fastboot mode the fastboot mode (volume down+power) will only display for about 10 seconds and then it will reboots itself into charging mode. doesn't matter if i use the key, or even use adb commands to get there. it will still reboot itself in short period of time.
why is this happening? i just want to unlock my bootloader thats all...
Please help me... thanks in advance....
Click to expand...
Click to collapse
Your computer is unable to detect the phone in fastboot mode. Uninstall and reinstall the fastboot drivers, the proper ones. If successfully detected it should not be rebooting.
Cheers
ArK96 said:
Your computer is unable to detect the phone in fastboot mode. Uninstall and reinstall the fastboot drivers, the proper ones. If successfully detected it should not be rebooting.
Cheers
Click to expand...
Click to collapse
I just try this...but nothing happened...
Smart Sujoy said:
I just try this...but nothing happened...
Click to expand...
Click to collapse
That ten seconds when phone is turned on in fastboot and connected to computer quickly type this command in command prompt without the quotes
" fastboot devices "If a device with device number shows up fastboot drivers are installed correctly or else if nothing shows up fastboot drivers are not installed properly..so check them.
Smart Sujoy said:
When I'm try to boot in fastboot mode the fastboot mode (volume down+power) will only display for about 10 seconds and then it will reboots itself into charging mode. doesn't matter if i use the key, or even use adb commands to get there. it will still reboot itself in short period of time.
why is this happening? i just want to unlock my bootloader thats all...
Please help me... thanks in advance....
Click to expand...
Click to collapse
i actually watched this video, to unlock my bootloader
https://youtu.be/dDRC-J-cLlE
Smart Sujoy said:
When I'm try to boot in fastboot mode the fastboot mode (volume down+power) will only display for about 10 seconds and then it will reboots itself into charging mode. doesn't matter if i use the key, or even use adb commands to get there. it will still reboot itself in short period of time.
why is this happening? i just want to unlock my bootloader thats all...
Please help me... thanks in advance....
Click to expand...
Click to collapse
Im having this issue now on my redmi note 4x.
Do you have a solution? Thanks
Man, you need adb bootloader interface installed properly.
Open device manager, and you'll see something popping out when you connect your device to pc on fastboot mode, there you can see what's wrong. So all you need is update that wrong driver (the one that popped out once you connect your device in fastboot mode) and install redmi note 4x driver, just ignore your disappearing fastboot mode in your device, keep install it. You should have your redmi note 4x driver prepared btw, you can google it.
Good luck!
use USB2 port, do not use USB3
Smart Sujoy said:
When I'm try to boot in fastboot mode the fastboot mode (volume down+power) will only display for about 10 seconds and then it will reboots itself into charging mode. doesn't matter if i use the key, or even use adb commands to get there. it will still reboot itself in short period of time.
why is this happening? i just want to unlock my bootloader thats all...
Please help me... thanks in advance....
Click to expand...
Click to collapse
Update your redmi note 4 driver in PC through a software called driver booster.... It's free
AtheistZ said:
Update your redmi note 4 driver in PC through a software called driver booster.... It's free
Click to expand...
Click to collapse
NO ADS!!!!
and2nckiko said:
Im having this issue now on my redmi note 4x.
Do you have a solution? Thanks
Click to expand...
Click to collapse
That is because your computer does not make any connection with your phone. Are you sure that you have all drivers installed. You can install fastboot drivers with mi flash tool but before that write this command in an admin cmd - bcdedit /set TESTSIGNING OFF and reboot. Now you can now install the fastboot driver from mi flash tool and try your luck
ArK96 said:
That ten seconds when phone is turned on in fastboot and connected to computer quickly type this command in command prompt without the quotes
" fastboot devices "If a device with device number shows up fastboot drivers are installed correctly or else if nothing shows up fastboot drivers are not installed properly..so check them.
Click to expand...
Click to collapse
Bro my bootloader is already unlocked but my phone still restarts after 10 second i did not connected to any usb still it restarts i updated magisk today and now nothing is working in my phone no call incomming and outgoing audio is fully disabled when i turn on audio in any app it crashes or freezes i tried to factory data reset my phone but nothing works plzz help me broo
Leeeop90 said:
Bro my bootloader is already unlocked but my phone still restarts after 10 second i did not connected to any usb still it restarts i updated magisk today and now nothing is working in my phone no call incomming and outgoing audio is fully disabled when i turn on audio in any app it crashes or freezes i tried to factory data reset my phone but nothing works plzz help me broo
Click to expand...
Click to collapse
My root is also lost
JustExperimentingRedmi said:
That is because your computer does not make any connection with your phone. Are you sure that you have all drivers installed. You can install fastboot drivers with mi flash tool but before that write this command in an admin cmd - bcdedit /set TESTSIGNING OFF and reboot. Now you can now install the fastboot driver from mi flash tool and try your luck
Click to expand...
Click to collapse
So drivers are needed for fastboot flashing a xiaomi phone?
Why I didn't need drivers to use fastboot with other phone manufacturers?
In these phones (oppo, op) the phone stays in fastboot mode until you exit or shut it down.
I think xiaomi did a bad move with this.
───────
EDIT: It works in debian without any additional drivers.
Fastboot recognizes the xiaomi phone with "fastboot devices" command.
So it was as you said.
Hello.
Today I updated from the Nord 5G to the Nord 2 5G.
DN2103_11_A.14
I have enabled developer mode, oem unlock and adb debug.
I can't access fastboot properly. And recovery is different from the previous Nord. There is no option to reboot to fastboot.
I use adb reboot-fastboot and I enter a sort of fastboot. It says:
fastboot_unlock_verify ok
The device is in fastboot mode which is only for debug Android devices. if you want to exit fastboot mode, please long press volume up nad power buttons simultaneously.
Phone is recognized in windows when in adb-mode (normal booted), but does not recognize it when in this new fastboot mode. Just an Android with an exclamation mark on.
Halp?
krugm0f0 said:
Hello.
Today I updated from the Nord 5G to the Nord 2 5G.
DN2103_11_A.14
I have enabled developer mode, oem unlock and adb debug.
I can't access fastboot properly. And recovery is different from the previous Nord. There is no option to reboot to fastboot.
I use adb reboot-fastboot and I enter a sort of fastboot. It says:
fastboot_unlock_verify ok
The device is in fastboot mode which is only for debug Android devices. if you want to exit fastboot mode, please long press volume up nad power buttons simultaneously.
Phone is recognized in windows when in adb-mode (normal booted), but does not recognize it when in this new fastboot mode. Just an Android with an exclamation mark on.
Halp?
Click to expand...
Click to collapse
Don't own this device but try: "adb reboot bootloader" instead and test fastboot commands from there (don't navigate to Fasboot from bootloader).
krugm0f0 said:
Phone is recognized in windows when in adb-mode (normal booted), but does not recognize it when in this new fastboot mode. Just an Android with an exclamation mark on.
Click to expand...
Click to collapse
This is normal behaviour with the OPN2 afaik. Your PC can access the USERDATA folder whilst in ADB mode (aka booted normally) and whilst in the recovery bios. Your pc CANNOT access the USERDATA folder when your phone is in fastboot, or at least I've never been able to on my Nord 2.
Your op didn't include what exactly you need help with. Everything you described is exactly intended behaviour. From my understanding your seem to have booted into fastboot mode, then noticed your PC can't access userdata. That's normal, you can still use fastboot commands and your PC is still connected to the phone. Your "My Computer" folder on PC not showing the phone shouldn't be any cause for alarm.
Now I'm starting to guess, because you might have failed to mention; Are you unable to send fastboot commands to your phone when its in fastboot mode?
Are you trying to flash a file?
What's the issue?
Zombnombs said:
This is normal behaviour with the OPN2 afaik. Your PC can access the USERDATA folder whilst in ADB mode (aka booted normally) and whilst in the recovery bios. Your pc CANNOT access the USERDATA folder when your phone is in fastboot, or at least I've never been able to on my Nord 2.
Your op didn't include what exactly you need help with. Everything you described is exactly intended behaviour. From my understanding your seem to have booted into fastboot mode, then noticed your PC can't access userdata. That's normal, you can still use fastboot commands and your PC is still connected to the phone. Your "My Computer" folder on PC not showing the phone shouldn't be any cause for alarm.
Now I'm starting to guess, because you might have failed to mention; Are you unable to send fastboot commands to your phone when its in fastboot mode?
Are you trying to flash a file?
What's the issue?
Click to expand...
Click to collapse
I am unable to send fastboot commands. Is not recognized by "fastboot devices". And this fastboot mode looks nothing like my previous phones. 2, X, 5T and Nord 5G. <waiting for device>
I want to do my "usual routine" with my new phones. Unlock, flash twrp or other recovery, and flash magisk for root.
After a "full wipe" of ADB and fastboot drivers, I reinstalled and got it working!
nothing. only recovery mode
vol down+ power =recovery mode
vol up + power = normal boot
I finaly boot into fastboot mode with adb command only (adb reboot bootloader)
With buttons wont work.
But i can't enable Volte/Vowifi (thats why i wanted to boot there).
Can you send adb commands when in recovery mode ?
I'm trying to enable VoLTE too, but adb only detect phone when powered normaly, not when in recovery mode.
i don't know about adb but in fastboot you can.
I can't enable volte/vowifi in fastboot with this commands.
https://androplus.org/wp/wp-content/uploads/2021/08/onr12.jpg
Fastboot commands start with fastboot, those are adb commands.
krugm0f0 said:
After a "full wipe" of ADB and fastboot drivers, I reinstalled and got it working!
Click to expand...
Click to collapse
krugm0f0 said:
Hello.
Today I updated from the Nord 5G to the Nord 2 5G.
DN2103_11_A.14
I have enabled developer mode, oem unlock and adb debug.
I can't access fastboot properly. And recovery is different from the previous Nord. There is no option to reboot to fastboot.
I use adb reboot-fastboot and I enter a sort of fastboot. It says:
fastboot_unlock_verify ok
The device is in fastboot mode which is only for debug Android devices. if you want to exit fastboot mode, please long press volume up nad power buttons simultaneously.
Phone is recognized in windows when in adb-mode (normal booted), but does not recognize it when in this new fastboot mode. Just an Android with an exclamation mark on.
Halp?
Click to expand...
Click to collapse
i am having the same issue can any one help
krugm0f0 said:
After a "full wipe" of ADB and fastboot drivers, I reinstalled and got it working!
Click to expand...
Click to collapse
pls contact me in 9650930525 in this number and help me how u did it
drkanurag said:
i am having the same issue can any one help
Click to expand...
Click to collapse
pankspoo said:
On Android 12 OnePlus removed fastbootmode so no unlocking nothing.
But how did u booted in fastbootmode on oos 12 i can't understand
Click to expand...
Click to collapse
roldev said:
Downgrade to latest A11. Unlock via fastboot. Do what you want, then. All explained here or/and telegram group. Sorry, don't have time to do step by step guide now. Cheers.
Click to expand...
Click to collapse
Follow this guide to downgrade to A11 https://community.oneplus.com/thread/1596759
Then you should be able to access fastboot.
krugm0f0 said:
After a "full wipe" of ADB and fastboot drivers, I reinstalled and got it working!
Click to expand...
Click to collapse
Could you go into more detail on what you did in the entire process exactly? Did you use the drivers and adb install from the 15 sec installer? Did you simply uninstall them in the Windows Device Manager and click on "update drivers" to find the local drivers from the 15 sec installer? Which ones did you choose? Sorry, these might be dumb questions, but I'm admittedly very stupid when it comes to Windows and drivers in particular.
I did the exact thing I described above but I'm still just getting that message. Additionally, "fastboot devices" won't list anything and "fastboot oem unlock" will wait for the device for eternaty. "adb devices" on the other hand will list my device while not in Fastboot.