Hello.
Today I updated from the Nord 5G to the Nord 2 5G.
DN2103_11_A.14
I have enabled developer mode, oem unlock and adb debug.
I can't access fastboot properly. And recovery is different from the previous Nord. There is no option to reboot to fastboot.
I use adb reboot-fastboot and I enter a sort of fastboot. It says:
fastboot_unlock_verify ok
The device is in fastboot mode which is only for debug Android devices. if you want to exit fastboot mode, please long press volume up nad power buttons simultaneously.
Phone is recognized in windows when in adb-mode (normal booted), but does not recognize it when in this new fastboot mode. Just an Android with an exclamation mark on.
Halp?
krugm0f0 said:
Hello.
Today I updated from the Nord 5G to the Nord 2 5G.
DN2103_11_A.14
I have enabled developer mode, oem unlock and adb debug.
I can't access fastboot properly. And recovery is different from the previous Nord. There is no option to reboot to fastboot.
I use adb reboot-fastboot and I enter a sort of fastboot. It says:
fastboot_unlock_verify ok
The device is in fastboot mode which is only for debug Android devices. if you want to exit fastboot mode, please long press volume up nad power buttons simultaneously.
Phone is recognized in windows when in adb-mode (normal booted), but does not recognize it when in this new fastboot mode. Just an Android with an exclamation mark on.
Halp?
Click to expand...
Click to collapse
Don't own this device but try: "adb reboot bootloader" instead and test fastboot commands from there (don't navigate to Fasboot from bootloader).
krugm0f0 said:
Phone is recognized in windows when in adb-mode (normal booted), but does not recognize it when in this new fastboot mode. Just an Android with an exclamation mark on.
Click to expand...
Click to collapse
This is normal behaviour with the OPN2 afaik. Your PC can access the USERDATA folder whilst in ADB mode (aka booted normally) and whilst in the recovery bios. Your pc CANNOT access the USERDATA folder when your phone is in fastboot, or at least I've never been able to on my Nord 2.
Your op didn't include what exactly you need help with. Everything you described is exactly intended behaviour. From my understanding your seem to have booted into fastboot mode, then noticed your PC can't access userdata. That's normal, you can still use fastboot commands and your PC is still connected to the phone. Your "My Computer" folder on PC not showing the phone shouldn't be any cause for alarm.
Now I'm starting to guess, because you might have failed to mention; Are you unable to send fastboot commands to your phone when its in fastboot mode?
Are you trying to flash a file?
What's the issue?
Zombnombs said:
This is normal behaviour with the OPN2 afaik. Your PC can access the USERDATA folder whilst in ADB mode (aka booted normally) and whilst in the recovery bios. Your pc CANNOT access the USERDATA folder when your phone is in fastboot, or at least I've never been able to on my Nord 2.
Your op didn't include what exactly you need help with. Everything you described is exactly intended behaviour. From my understanding your seem to have booted into fastboot mode, then noticed your PC can't access userdata. That's normal, you can still use fastboot commands and your PC is still connected to the phone. Your "My Computer" folder on PC not showing the phone shouldn't be any cause for alarm.
Now I'm starting to guess, because you might have failed to mention; Are you unable to send fastboot commands to your phone when its in fastboot mode?
Are you trying to flash a file?
What's the issue?
Click to expand...
Click to collapse
I am unable to send fastboot commands. Is not recognized by "fastboot devices". And this fastboot mode looks nothing like my previous phones. 2, X, 5T and Nord 5G. <waiting for device>
I want to do my "usual routine" with my new phones. Unlock, flash twrp or other recovery, and flash magisk for root.
After a "full wipe" of ADB and fastboot drivers, I reinstalled and got it working!
nothing. only recovery mode
vol down+ power =recovery mode
vol up + power = normal boot
I finaly boot into fastboot mode with adb command only (adb reboot bootloader)
With buttons wont work.
But i can't enable Volte/Vowifi (thats why i wanted to boot there).
Can you send adb commands when in recovery mode ?
I'm trying to enable VoLTE too, but adb only detect phone when powered normaly, not when in recovery mode.
i don't know about adb but in fastboot you can.
I can't enable volte/vowifi in fastboot with this commands.
https://androplus.org/wp/wp-content/uploads/2021/08/onr12.jpg
Fastboot commands start with fastboot, those are adb commands.
krugm0f0 said:
After a "full wipe" of ADB and fastboot drivers, I reinstalled and got it working!
Click to expand...
Click to collapse
krugm0f0 said:
Hello.
Today I updated from the Nord 5G to the Nord 2 5G.
DN2103_11_A.14
I have enabled developer mode, oem unlock and adb debug.
I can't access fastboot properly. And recovery is different from the previous Nord. There is no option to reboot to fastboot.
I use adb reboot-fastboot and I enter a sort of fastboot. It says:
fastboot_unlock_verify ok
The device is in fastboot mode which is only for debug Android devices. if you want to exit fastboot mode, please long press volume up nad power buttons simultaneously.
Phone is recognized in windows when in adb-mode (normal booted), but does not recognize it when in this new fastboot mode. Just an Android with an exclamation mark on.
Halp?
Click to expand...
Click to collapse
i am having the same issue can any one help
krugm0f0 said:
After a "full wipe" of ADB and fastboot drivers, I reinstalled and got it working!
Click to expand...
Click to collapse
pls contact me in 9650930525 in this number and help me how u did it
drkanurag said:
i am having the same issue can any one help
Click to expand...
Click to collapse
pankspoo said:
On Android 12 OnePlus removed fastbootmode so no unlocking nothing.
But how did u booted in fastbootmode on oos 12 i can't understand
Click to expand...
Click to collapse
roldev said:
Downgrade to latest A11. Unlock via fastboot. Do what you want, then. All explained here or/and telegram group. Sorry, don't have time to do step by step guide now. Cheers.
Click to expand...
Click to collapse
Follow this guide to downgrade to A11 https://community.oneplus.com/thread/1596759
Then you should be able to access fastboot.
krugm0f0 said:
After a "full wipe" of ADB and fastboot drivers, I reinstalled and got it working!
Click to expand...
Click to collapse
Could you go into more detail on what you did in the entire process exactly? Did you use the drivers and adb install from the 15 sec installer? Did you simply uninstall them in the Windows Device Manager and click on "update drivers" to find the local drivers from the 15 sec installer? Which ones did you choose? Sorry, these might be dumb questions, but I'm admittedly very stupid when it comes to Windows and drivers in particular.
I did the exact thing I described above but I'm still just getting that message. Additionally, "fastboot devices" won't list anything and "fastboot oem unlock" will wait for the device for eternaty. "adb devices" on the other hand will list my device while not in Fastboot.
Related
Hi!
I recently got my new Acer Tablet A3-A30. After unlocking developer options and activating debugging I was able to use adb. So I rebooted into bootloader to see if fastboot works - it did not! The output of fastboot devices was empty (this and the following commands were typed as root).
So I killed adb with adb kill-server, disconnected it from my computer and turned it off. After a few moments I turned it on by pressing power while holding Vol[-]-Key. Again the tablet booted into fastboot mode. Now I connected it with my computer and hoped fastboot will recognize the device now. Again, the output was empty.
I noticed, that after connecting the tablet, the text fastboot mode on the display didn't change - all other devices I put into fastboot mode showed fastboot usb mode or similar after I connected them with my computer.
I tried different USB ports - nothing changed.
I'm just wondering, since I'm not familiar with acer devices: Is there a hidden key sequence to get into fastboot usb mode?
Thanks,
Tintom1
Tintom1 said:
Hi!
I recently got my new Acer Tablet A3-A30. After unlocking developer options and activating debugging I was able to use adb. So I rebooted into bootloader to see if fastboot works - it did not! The output of fastboot devices was empty (this and the following commands were typed as root).
So I killed adb with adb kill-server, disconnected it from my computer and turned it off. After a few moments I turned it on by pressing power while holding Vol[-]-Key. Again the tablet booted into fastboot mode. Now I connected it with my computer and hoped fastboot will recognize the device now. Again, the output was empty.
I noticed, that after connecting the tablet, the text fastboot mode on the display didn't change - all other devices I put into fastboot mode showed fastboot usb mode or similar after I connected them with my computer.
I tried different USB ports - nothing changed.
I'm just wondering, since I'm not familiar with acer devices: Is there a hidden key sequence to get into fastboot usb mode?
Thanks,
Tintom1
Click to expand...
Click to collapse
I have an a1-830 and it can be a real pain in the ass to get anything working on them. Try this, since you got adb working, adb reboot bootloader, then wait till it says fastboot cmd waiting or something. If that din't work, reply!
RAZERZDAHACKER said:
I have an a1-830 and it can be a real pain in the ass to get anything working on them. Try this, since you got adb working, adb reboot bootloader, then wait till it says fastboot cmd waiting or something. If that din't work, reply!
Click to expand...
Click to collapse
It worked, I got the fastboot mode with fastboot cmd waiting message!
Tintom1 said:
It worked, I got the fastboot mode with fastboot cmd waiting message!
Click to expand...
Click to collapse
Ayyy, hit thanks if I helped
RAZERZDAHACKER said:
Ayyy, hit thanks if I helped
Click to expand...
Click to collapse
But this is what I already got. It says fastboot mode (now with the waiting message), but not fastboot usb, so fastboot still doesn't see the device
Tintom1 said:
But this is what I already got. It says fastboot mode (now with the waiting message), but not fastboot usb, so fastboot still doesn't see the device
Click to expand...
Click to collapse
And fastboot devices shows...?
RAZERZDAHACKER said:
And fastboot devices shows...?
Click to expand...
Click to collapse
Nothing:
# fastboot devices
#
Tintom1 said:
Nothing:
# fastboot devices
#
Click to expand...
Click to collapse
If you are using Linux, try running fastboot with the sudo command. Also, the drivers might not be properly installed, check out this to download them.
Hey friends i was able to unlock bootloader of my REDMI NOTE 3 OFFICIALLY.
I wan to root the device and install TWRP but for tat i have to connect my phone in fastboot mode.
The thing is phone is recognised as an adb device when it is on but after putting the phone in fastboot mode my laptop is not showing in cmd after " fastboot devices" command
plz help if anyne know how to fix this.
How are you putting it in fastboot mode?
did you already install correct driver in your pc?
you can try to instal latest mi pc suite which will help you to instal correct driver for your phone.
If you're already success unlocking with official way..then it's mean your fastboot driver already correct (if you're using the same computer when you're unlocking before)
Maybe i think you're missed something to put your phone into fastboot mode..
First way you can go into fastboot mode with ADB command while your phone already ON, just typing command "adb reboot bootloader" then enter..your phone will reboot into fastboot mode
Second way to go into fastboot mode firstly you must turn off your phone..just wait until that phone is truely OFF..
then press and hold volume down button..then followed with pressing and hold power button..your phone will booting into fastboot mode.
When I'm try to boot in fastboot mode the fastboot mode (volume down+power) will only display for about 10 seconds and then it will reboots itself into charging mode. doesn't matter if i use the key, or even use adb commands to get there. it will still reboot itself in short period of time.
why is this happening? i just want to unlock my bootloader thats all...
Please help me... thanks in advance....
Smart Sujoy said:
When I'm try to boot in fastboot mode the fastboot mode (volume down+power) will only display for about 10 seconds and then it will reboots itself into charging mode. doesn't matter if i use the key, or even use adb commands to get there. it will still reboot itself in short period of time.
why is this happening? i just want to unlock my bootloader thats all...
Please help me... thanks in advance....
Click to expand...
Click to collapse
Your computer is unable to detect the phone in fastboot mode. Uninstall and reinstall the fastboot drivers, the proper ones. If successfully detected it should not be rebooting.
Cheers
ArK96 said:
Your computer is unable to detect the phone in fastboot mode. Uninstall and reinstall the fastboot drivers, the proper ones. If successfully detected it should not be rebooting.
Cheers
Click to expand...
Click to collapse
I just try this...but nothing happened...
Smart Sujoy said:
I just try this...but nothing happened...
Click to expand...
Click to collapse
That ten seconds when phone is turned on in fastboot and connected to computer quickly type this command in command prompt without the quotes
" fastboot devices "If a device with device number shows up fastboot drivers are installed correctly or else if nothing shows up fastboot drivers are not installed properly..so check them.
Smart Sujoy said:
When I'm try to boot in fastboot mode the fastboot mode (volume down+power) will only display for about 10 seconds and then it will reboots itself into charging mode. doesn't matter if i use the key, or even use adb commands to get there. it will still reboot itself in short period of time.
why is this happening? i just want to unlock my bootloader thats all...
Please help me... thanks in advance....
Click to expand...
Click to collapse
i actually watched this video, to unlock my bootloader
https://youtu.be/dDRC-J-cLlE
Smart Sujoy said:
When I'm try to boot in fastboot mode the fastboot mode (volume down+power) will only display for about 10 seconds and then it will reboots itself into charging mode. doesn't matter if i use the key, or even use adb commands to get there. it will still reboot itself in short period of time.
why is this happening? i just want to unlock my bootloader thats all...
Please help me... thanks in advance....
Click to expand...
Click to collapse
Im having this issue now on my redmi note 4x.
Do you have a solution? Thanks
Man, you need adb bootloader interface installed properly.
Open device manager, and you'll see something popping out when you connect your device to pc on fastboot mode, there you can see what's wrong. So all you need is update that wrong driver (the one that popped out once you connect your device in fastboot mode) and install redmi note 4x driver, just ignore your disappearing fastboot mode in your device, keep install it. You should have your redmi note 4x driver prepared btw, you can google it.
Good luck!
use USB2 port, do not use USB3
Smart Sujoy said:
When I'm try to boot in fastboot mode the fastboot mode (volume down+power) will only display for about 10 seconds and then it will reboots itself into charging mode. doesn't matter if i use the key, or even use adb commands to get there. it will still reboot itself in short period of time.
why is this happening? i just want to unlock my bootloader thats all...
Please help me... thanks in advance....
Click to expand...
Click to collapse
Update your redmi note 4 driver in PC through a software called driver booster.... It's free
AtheistZ said:
Update your redmi note 4 driver in PC through a software called driver booster.... It's free
Click to expand...
Click to collapse
NO ADS!!!!
and2nckiko said:
Im having this issue now on my redmi note 4x.
Do you have a solution? Thanks
Click to expand...
Click to collapse
That is because your computer does not make any connection with your phone. Are you sure that you have all drivers installed. You can install fastboot drivers with mi flash tool but before that write this command in an admin cmd - bcdedit /set TESTSIGNING OFF and reboot. Now you can now install the fastboot driver from mi flash tool and try your luck
ArK96 said:
That ten seconds when phone is turned on in fastboot and connected to computer quickly type this command in command prompt without the quotes
" fastboot devices "If a device with device number shows up fastboot drivers are installed correctly or else if nothing shows up fastboot drivers are not installed properly..so check them.
Click to expand...
Click to collapse
Bro my bootloader is already unlocked but my phone still restarts after 10 second i did not connected to any usb still it restarts i updated magisk today and now nothing is working in my phone no call incomming and outgoing audio is fully disabled when i turn on audio in any app it crashes or freezes i tried to factory data reset my phone but nothing works plzz help me broo
Leeeop90 said:
Bro my bootloader is already unlocked but my phone still restarts after 10 second i did not connected to any usb still it restarts i updated magisk today and now nothing is working in my phone no call incomming and outgoing audio is fully disabled when i turn on audio in any app it crashes or freezes i tried to factory data reset my phone but nothing works plzz help me broo
Click to expand...
Click to collapse
My root is also lost
JustExperimentingRedmi said:
That is because your computer does not make any connection with your phone. Are you sure that you have all drivers installed. You can install fastboot drivers with mi flash tool but before that write this command in an admin cmd - bcdedit /set TESTSIGNING OFF and reboot. Now you can now install the fastboot driver from mi flash tool and try your luck
Click to expand...
Click to collapse
So drivers are needed for fastboot flashing a xiaomi phone?
Why I didn't need drivers to use fastboot with other phone manufacturers?
In these phones (oppo, op) the phone stays in fastboot mode until you exit or shut it down.
I think xiaomi did a bad move with this.
───────
EDIT: It works in debian without any additional drivers.
Fastboot recognizes the xiaomi phone with "fastboot devices" command.
So it was as you said.
Hey all, I just got a G90 Pro that I want to put a ROM on, but something is up with the fastboot. I have the drivers installed according to what I found online, but when I go to fastboot there is no response from the cmd inputs. Nothing even shows up when I check fastboot devices. Has anyone had luck with these phones? I can't even unlock the bootloader!
If not already done yet, install the suitable BLUE USB Driver for Android:
Download BLU USB Driver for Windows (Latest Driver)
Download the latest and original BLU USB Driver to connect any BLU Smartphone and Tablets to the Windows Computer quickly.
androidmtk.com
jwoegerbauer said:
If not already done yet, install the suitable BLUE USB Driver for Android:
Download BLU USB Driver for Windows (Latest Driver)
Download the latest and original BLU USB Driver to connect any BLU Smartphone and Tablets to the Windows Computer quickly.
androidmtk.com
Click to expand...
Click to collapse
I have done this, but did it again just to be sure, and device manager recognizes the G90 Pro under USB devices, and ADB finds it, but when I do the 'adb reboot bootloader' the fastboot mode text is on the bottom, yet fastboot commands don't do anything, not even 'fastboot devices'.
Edit: Fastboot devices is recognized in fastbootd, but not regular fastboot, yet the other commands don't work.
In your case fastboot is located in Android's user-space, hence you run this command sequence
Code:
adb devices
adb reboot fastboot
fastboot reboot fastboot
fastboot <YOUR-COMMAND-HERE>
fastboot reboot
jwoegerbauer said:
In your case fastboot is located in Android's user-space, hence you run this command sequence
Code:
adb devices
adb reboot fastboot
fastboot reboot fastboot
fastboot <YOUR-COMMAND-HERE>
fastboot reboot
Click to expand...
Click to collapse
Fastboot reboot fastboot just brings up the fastboot command list. Assuming it's expecting me to try reboot bootloader.
That's really weird because your phone is running Android 10.
My info in settings definitely confirms that. Nothing seems to be working as expected though.
jwoegerbauer said:
That's really weird because your phone is running Android 10.
Click to expand...
Click to collapse
Is there any other possible solution? I still can't get fastboot commands to work after rebooting to fastboot mode from fastbootd.
HI to all
I got my phone back from service, latest version installed (DN2103_11_A.14 EU).
I will flash TWRP and root, so do I need A.14 vbmeta or can I just use vbmeta from same post I will download TWRP?
If I need A.14 vbmeta, does anyone have it?
Thanks
There is no difference, the same one can be used for all versions.
you can use the vbmeta from TWRP Thread.
Zombnombs said:
There is no difference, the same one can be used for all versions.
Click to expand...
Click to collapse
HI and thank you.
HofaTheRipper said:
you can use the vbmeta from TWRP Thread.
Click to expand...
Click to collapse
HI and thank you.
How do you enter fastboot mode? There is no option from power button, and when I use adb reboot bootloader, I go to a black screen with font size 1 that says we are in fastboot mode, and this is for developers only, press power up + power to exit.
In recovery there is no "Advanced" option to reboot to fastboot.
krugm0f0 said:
I use adb reboot bootloader, I go to a black screen with font size 1 that says we are in fastboot mode, and this is for developers only, press power up + power to exit
Click to expand...
Click to collapse
That's exactly what fastboot mode is. Your phone is in fastboot mode. Use your poershell terminal on the pc to start sending fastboot commands. Eg "fastboot devices" to test the connection.
If you phone is not responding to fastboot commands, try adding "./" to the start of every fastboot command instead, eg "./fastboot devices"
Zombnombs said:
That's exactly what fastboot mode is. Your phone is in fastboot mode. Use your poershell terminal on the pc to start sending fastboot commands. Eg "fastboot devices" to test the connection.
If you phone is not responding to fastboot commands, try adding "./" to the start of every fastboot command instead, eg "./fastboot devices"
Click to expand...
Click to collapse
It's just that it looks nothing like the fastboot mode on my OP2, OPX, OP5T or OP Nord 5G. And it's not recognized by fastboot devices, and does not accept any commands. <waiting for device>
krugm0f0 said:
It's just that it looks nothing like the fastboot mode on my OP2, OPX, OP5T or OP Nord 5G. And it's not recognized by fastboot devices, and does not accept any commands. <waiting for device>
Click to expand...
Click to collapse
Seems like you just don't have the right drivers installed. Sure it looks different but that doesn't mean it has to work differently.
Windows can get the drivers automatically for you, connect in fastboot mode, then check for updates in windows, then they should either get installed or show up in optional updates as Mediatek ADB something.