I should have posted this in development area < Galaxy A3, A5, A7, A8 Android Development > , some admin / modder please move the thread , thanks and sorry for the mistake, i was in a hurry , jogging time !
I've recently managed to root my phone via twrp , i've tried a lot of already built twrp recovery image built for marshmallow after updating, this one above
( TWRP_2.8.7.0_A3_F-H-FU_5.0.2_v2.tar > file attached at the thread bottom ) .. yes i know is for lolipop but works on marshmallow , i didn't managed to find who built it but it works and loads even with the "Set warranty bit : recovery" issue , the thing is that get stitch as welll and you are not needed to flash original recovery after rooting .
As the thread title says this is for A3 a300fu (A3 2015) updated to Marshmallow 6.0.1 ( A300FUXXU1CPH3_A300FUOXX1CPI1_ROM ) .
1) Download supersu zip file and place it within your phone memory or sd card
1 ) a) Flash above twrp recovery image with odin .
2) Enter recovery ( power key > home > volume up after flashing the recovery image )
RECOMMENDED > DO A BACKUP FROM TWRP BEFORE FLASHING ROOT AND XPOSED JUST TO STAY SAFE .
3) From twrp choose > install > select your zip file > swap to flash
( I've flashed latest file : SR4-SuperSU-v2.78-SR4-20161115184928.zip )
4) Go to > restart > system TWRP WILL ASK YOU TO INSTALL ROOT CHOOSE > >>> DO NOT INSTALL <<< <
5) LET IT BOOT > YOU WILL ALSO SEE ANOTHER "Set warranty bit" MESSAGE , just wait for boot do not force reboot or something else
(SAME FOR XPOSED FRAMEWORK IT WILL TAKE SOME MINUTES TO BOOT) .
5) a) Download supersu chainfire from google play store and make an update if required
>>>>>> MODS <<<<<<<
Since i've also wanted to install xposed framework as well , i've tested and successfully managed to install this mod :
> xposed-v86.0-sdk23-arm-custom-build-by-wanam-20160709.zip
For xposed framework before flashing zip file with the already installed twrp , first install right after rooting
> XposedInstaller_3.0_alpha4.apk from this thread , then reboot to twrp and go to install and select the above named zip .
Happy rooting !
works! many thanks
Unable to flash TWRP
My phone model is SM-A300FU. I tried flashing TWRP with Odin v3.12.3, but it doesn't do anything. On AP I selected the attached .tar file and I put my A3 into download mode. It took 4 seconds to do it and Odin said that it passed, but it didn't do anything. I tried doing it 3 times and it didn't work. My phone didn't get bricked, but it didn't do anything to the recovery. I still have the stock recovery that comes with the phone. Please help. Thank you.
theodoros_1234 said:
My phone model is SM-A300FU. I tried flashing TWRP with Odin v3.12.3, but it doesn't do anything. On AP I selected the attached .tar file and I put my A3 into download mode. It took 4 seconds to do it and Odin said that it passed, but it didn't do anything. I tried doing it 3 times and it didn't work. My phone didn't get bricked, but it didn't do anything to the recovery. I still have the stock recovery that comes with the phone. Please help. Thank you.
Click to expand...
Click to collapse
Try with Odin v10.7 or v11 .. Last version of odin doesn't work great with A 2015
Sent from my SM-A300FU using XDA Labs
kiva1 said:
Try with Odin v10.7 or v11 .. Last version of odin doesn't work great with A 2015
Click to expand...
Click to collapse
Thank you for helping, but it turns out that wasn't the problem. I figured it out, and now I have TWRP installed and I rooted my device.
managed to do mine
Hey theodoros_1234 how did you figured it
out
Related
I am not a developer at all , just got a working method from different web sources. so i think posting this method will help all A5 users. hope it helps you ...
Note: This Method Will Set Your KNOX Status As 0x1 , That Means Your Warranty Will Be Void Forever.
Download Links For CF-Auto-Root Packages:
CF-Auto-Root Package For A5 SM 5000
CF-Auto-Root Package For A5 SM 5009
CF-Auto-Root Package For A5 SM 500F
CF-Auto-Root Package For A5 SM 500FU
CF-Auto-Root Package For A5 SM 500G
CF-Auto-Root Package For A5 SM 500H
CF-Auto-Root Package For A5 SM 500K
CF-Auto-Root Package For A5 SM 500L
CF-Auto-Root Package For A5 SM 500M
CF-Auto-Root Package For A5 SM 500S
CF-Auto-Root Package For A5 SM 500Y
CF-Auto-Root Package For A5 SM 500YZ
Download Links For Other Tools:
Flashify Premuim
Samsung Android USB Driver for Windows
ODIN 3.10
Download Links For Firmwares:
Firmware Source 1
Firmware Source 2
Root Process:
Step 1: So A5 has many variants under it and so i have provided chain fire root kit for all of them, so choose the kit as per your device model and download it on your PC. Once downloaded you have to create a folder named A5 on desktop and extract the contents of the downloaded zip file inside it.
Step 2 : After you do the above step now you have to download the famous Odin for A5 which will utilize the above kit and root your A5 .
Step 3 : Now we need our device in download mode so to do that turn off your A5 and then press home button along with the power button and the down button of volume all of them together until the mode loads up.
When mode loads up you have to use the USB cable to connect the device to PC.
Step 4 : Now when you open the Odin software which you just now installed on your computer, you will see a message saying added which means that A5 is added to Odin.
Step 5 : Once added you will see a button on which PDA/AP is written which upon clicking you have to select a file named .tar.md5 from the extracted folder which you kept on desktop.
Step 6 :After you do that, you will have to for sure follow this point before hitting start so click on F.Reset time and Auto reboot options and then you can click start.
Step 7 : When you hit start the Odin by using the root kit files, will root your device and will take around 2 – 3 minutes may be less then that to complete its process and when it is done successfully then it will show a message saying PASS which means the root access has been achieved on A5 , If Failed Follow Below Steps
Here is a problem , If ODIN saying RESET then your device will be rebooted and rooted successfully but it already destroyed boot.img and recovery.img . don't worry we are going to solve this issue with some simple steps. Download Falshify from above links and install after that download firmware for your device from above links then rename the Firmware_File_Name.tar.md5 to Firmware_File_Name.tar then open it using winrar and extract boot.img , recovery.img then copy it to your device storage and flash both of them using Flashify . don't reboot after flashing one image,flash both image then reboot.
You Have Root On Your Samsung Galaxy A5 ,Whatever It KitKat Or Lollipop.
Credits To: bestandroidrootedapps and mygalaxya (xda user)
has anyone tried this
you can try this ...
Didn't work on my A5 A500M on Android Lollipop 5.0.2
What can I do? I followed all steps and did also the last one, because ODIN said RESET after flashing the root file. And after extracting and flashing the both .img files my cellphone didn't boot the system, it just went into the recovery when I tried to boot it normally. So I flash the firmware again with ODIN.
I just want to know:
1) What really happens when ODIN says RESET after flashing a file? You said that at that point the files "recovery.img" and "boot.img" are destroyed. What do you really mean with that? Are they deleted from the cellphone?
2) Mean this that the cellphone won't boot anymore if turn it off and then try to turn it on again?
3) What would happen if I flash the Root file and ODIN says RESET after flashing but I don't flash the both .img files? Would my cellphone work normally or not?
Thank you very much and sorry for so many questions, I'm kind of new to this!
Why make a topic about this ? Its just ChainFire-Autoroot.
Anyway, ChainFire is boss
zat0x said:
Why make a topic about this ? Its just ChainFire-Autoroot.
Anyway, ChainFire is boss
Click to expand...
Click to collapse
Everyone not like you and me here .... and everyone not known about Chainfire and i know he is boss
I tried this. It doesnot work for SM-A500L on Lolipop.
AaronZar said:
What can I do? I followed all steps and did also the last one, because ODIN said RESET after flashing the root file. And after extracting and flashing the both .img files my cellphone didn't boot the system, it just went into the recovery when I tried to boot it normally. So I flash the firmware again with ODIN.
I just want to know:
1) What really happens when ODIN says RESET after flashing a file? You said that at that point the files "recovery.img" and "boot.img" are destroyed. What do you really mean with that? Are they deleted from the cellphone?
2) Mean this that the cellphone won't boot anymore if turn it off and then try to turn it on again?
3) What would happen if I flash the Root file and ODIN says RESET after flashing but I don't flash the both .img files? Would my cellphone work normally or not?
Thank you very much and sorry for so many questions, I'm kind of new to this!
Click to expand...
Click to collapse
Good questions mate. I would like to know there answers. These lines " at that point the files "recovery.img" and "boot.img" are destroyed" seems scary to me.
So; no answers here by the OP, and it worked for nobody...
Any idea to root this phone?
hey, how do i find out the rom version to download? do i have to look at the baseband version or build number?
hi i have done all steps and that fucng phone still do soft reset...
pls help
Damned it…...
I did it. But totally misunderstood step "nr 6 F.Reset time and Auto reboot options and then you can click start."
What do i do now??? The phone starts but i need to rebbot every time.
When it starts its a black screen...
But i can still turn it of.
towelroot
does anyone know if towelroot does trip knox ? because it's a nice alternative ...
My A5 always back to odin mode (Download Mode)
Haii.. thanks for the article,
but iam have a some problem.
I pass on point 7, but my android cannot be play, an return to odin back..
If i restart / hard reset to, my android always back to odin mode (download mode)
can you solve my problem ??
grongobar said:
does anyone know if towelroot does trip knox ? because it's a nice alternative ...
Click to expand...
Click to collapse
Welcome back to the 21st century.
Galaxy A5 (SM-A500H) error
Samsung A500H returns "Could not do normal boot"
This device is more reasonable to buy as it is small and elegant at a decent price.
It is IP68 water-friendly device and the display is much better - higher FPS than on higher resolution OLEDs - good for action games.
Root using CF-autoroot
Download the file from CF-auto-root repository:
https://download.chainfire.eu/1090/CF-Root/CF-Auto-Root/CF-Auto-Root-a3y17lte-a3y17ltexx-sma320f.zip
WARNING! KNOKX will be: tripped. E-fuse: << BLOWN >> Warranty: VOID!
If you have Nougat or after update to Android 7.0:
https://download.chainfire.eu/1090/CF-Root/CF-Auto-Root/CF-Auto-Root-a3y17lte-a3y17ltexx-sma320f.zip
Wipe data + cache before
Flash CF-autoroot before device initial configuration
WARNING! KNOKX will be: tripped. E-fuse: << BLOWN >> Warranty: VOID!
Click to expand...
Click to collapse
Unzip the file
Run Odin from the unzipped folder
Browse by clicking AP button the *.md5 file from the unzipped folder
Connect the A320F in download mode (start the device by holding Power+Home+Volume DOWN)
After starting the device in download mode, press Volume UP one to allow the download
A new COM port should be recognized by Odin after the device is connected via USB
Press Start button in in Odin
Rooting will take place automatically and the device will restart twice.
After the first restart you can disconnect the cable from the PC.
Second restart might take a few minutes.
After that you will find the SuperSU app installed.
Other, more complicated methods:
Rooting using custom recovery:
You will need:
SM-A320F with Exynos CPU (waiting for updates on other model)
Android Marshmallow 6.0.1 on your device
Odin v3.0.4 (download link below)
Team Win Recovery Project - TWRP (download link here) or ClockWork Mod Custom Recovery - CWM (download link below)
(Recommended custom recovery: Team Win Recovery Project :good: - more features, newer, works better)
SuperSU-v2.79-201612051815 (latest ZIP version available today - download link below)
SM-A320F TWRP & CWM recovery installation procedure:
On your device enable developer options and then disable OEM lock (FRP lock) for the device to allow you to flash custom recovery
(Activate OEM unlock from developer options menu)
Boot your device in Odin downlaod mode (hold VolDOWN + Home + Power)
Flash the *.tar file of TWRP or for the CWM using Odin's PDA option
(Uncheck Auto Reboot and F. Reset Time)
Force reboot your device (hold VolDOWN + Power for 10 seconds)
SM-A320F SuperSU ZIP installation procedure:
Copy SuperSU-v2.79-201612051815.zip on a microSD card (trough USB data cable or any other method)
Unplug the USB data cable from the phone and shut down the device
Start your device in Recovery mode (Hold VolUP + Home + Power)
(RECOVERY IS NOT SEANDROID ENFORCED - this warning is normal when booting into CWM custom recovery but not with TWRP)
The recovery menu will appear
> Using TWRP Recovery:
Swipe to allow modifications
Tap on Install
Tap on Select Storage at the bottom and select MicroSDCard then tap OK
Browse for the SuperSU-v2.79-201612051815.zip and tap on it to install it
Swipe to install SuperSU (confirm Flash)
> Using CWM Recovery:
Select Install zip update package (use VolDOWN/VolUP to navigate and Power to select)
Select Choose zip from sdcard
Select SuperSU-v2.79-201612051815.zip and press Power to install Super SU
The installation will perform automatically and the device will reboot twice.
First reboot will take longer. Please be patient. After the second reboot you will have SuperSU and root.
Downsides/bugs:
Knox will be tripped the second you flash a custom recovery (Warranty void: 1 - non reversibile)
(That means that you will lose the warranty for your device and that can not be changed)
(Perhaps that's why I personally can't invest more than $300 in a Samsung cellphone ever)
You won't be able to use Knox-related functions including Secure Folder ever again
Because of a SuperSU bug you won't be able to use Smart View (Miracast, project the screen to smart TV) unless you make an edit as follows:
Lewdog45 said:
Use a file browser such as Root Browser and go to the root of your device then locate the "System" folder and find build.prop and edit it with any application that can edit it and find the bottom line, right at the edge of the bottom line you need to press enter twice and then paste this:
wlan.wfd.hdcp=disable
And then save it and reboot your device.
Click to expand...
Click to collapse
Special thanks to: ashyx for compiling and updating TWRP recovery for SM-A320F and to XN Logos for providing compatible CWM recovery with SM-A320F.
Please feel free to post your attempts on rooting this device and the results. If other methods will show-up I will include them up here.
jnflos said:
Up to this point there is no success in rooting the Galaxy A3 2017 device.
This device is more reasonable to buy as it is small and elegant at a decent price.
Unfortunately there is no sign of working root method for the device.
Please feel free to update this topic with your attempts on rooting this device, and if success will strike, it will float up here for everyone to see.
Click to expand...
Click to collapse
+1
Thanks to developpers
News good, this one is Working , root cwm for galaxy A3 2017 Sm-A320F,
hit a Thanks if i helped you,
Here
I tried this morning without succes
copernic75 said:
I tried this morning without succes
Click to expand...
Click to collapse
Why didn't it work? Any errors in Odin?
No error in odin.
When i tried To reboot in revovery mode i don't have access to cmw .. just Android error message + Knox error
XN Logos said:
News good, this one is Working , root cwm for galaxy A3 2017 Sm-A320F,
hit a Thanks if i helped you,
Click to expand...
Click to collapse
Thanks! I will test this on my Galaxy SM-A320FL (single sim) to see...
Root was successful! I will update the first post with the mini tutorial and the files needed
REMOVED
I have indeed a a320-FL french model... Exynos inside.
What do you suggest?
jnflos said:
Root was successful! I will update the first post with the mini tutorial and the files needed
Click to expand...
Click to collapse
This cwm worked for Exynos?
tys0n said:
This cwm worked for Exynos?
Click to expand...
Click to collapse
Yes it worked. Please follow the tutorial that I wrote on the first post.
jnflos said:
Yes it worked. Please follow the tutorial that I wrote on the first post.
Click to expand...
Click to collapse
Ok good then I will remove my earlier post. I don't have the device so I can't try it.
I tried again this morning with success!
I can have access to recovery but not to sd card (internal or no)... so I can't root the device.
Any idea?
copernic75 said:
I tried again this morning with success!
I can have access to recovery but not to sd card (internal or no)... so I can't root the device.
Any idea?
Click to expand...
Click to collapse
Format the SD card on your PC using FAT32 option (use an USB adapter).
Copy the zip on the card, Insert it into the phone and reboot into recovery to test.
Yes... that's what I did. I found the solution into Google.
Thanks anyway for your help.
Do you think that it will be possible to install TWRP instead of CWM in recovery?
copernic75 said:
Yes... that's what I did. I found the solution into Google.
Thanks anyway for your help.
Do you think that it will be possible to install TWRP instead of CWM in recovery?
Click to expand...
Click to collapse
Yes. You can flash twrp in cwm and reboot to recovery. Twrp will be there instead.
wich version to choose?
Sorry. There's no twrp for a320 yet, but in general it's working fine to flash new recovery with existing one.
Hey guys, I will receive my a3 2017 soon and I was wondering if it would be preferable to root it now than waiting for the update to Nougat and re-root it then... Any idea when the update will be available for this phone? I was also wondering if I should use a specific brand or type of micro sd card with this phone?
Thanks
Guys I have a samsung J4 and twrp doesn't support it for rooting.What should i do now to root it?
up
use magisk with twrp, i root j4 with android oreo
how?complete tutorial please
up
up
#push
Install TWRP and Root J400f (Galaxy J4)
before start this process backup from your data. all feature about this phone you can see in gsmarena.
1 - Download last version of TWRP from github
2 - enable oem unlock from developer options.
3 - reboot device to Download mode (for download mode you must completely turn off phone and hold Vol Down + Home and connect USB cable)
you can use adb for download mode when phone is on : adb reboot download
4 - flash twrp with odin in windows or heimdall in linux with no reboot option
5- after flash is success remove battery and power on phone with (Vol Up + HOME + Power), phone boot to twrp
6 - in twrp if your pc not recognize adb or mtp , pulg&play usb cable several time .
7- use last Magisk installer from here
8-copy zip installer to sdcard and install it from sdcard ( use magisk option for keep dm-verity or force encryption)
9- after install success reboot phone to system , you can see magisk manager .
10 - if you not see magisk manager repeat step 6 , 7 , 8 , 9
if you not have info about install magisk and options please read magisk tutorials.
still no oem unlock in developer option.ive tried 7 days no reboot no shutdown.any other option guys?
brownstyle said:
still no oem unlock in developer option.ive tried 7 days no reboot no shutdown.any other option guys?
Click to expand...
Click to collapse
you can give screenshot from Download Mode page ?
see this thread
i did all that.doesnt work
my oem unlock option is enable by default
surbiks said:
my oem unlock option is enable by default
Click to expand...
Click to collapse
i cant even flash stock rom using odin
brownstyle said:
i cant even flash stock rom using odin
Click to expand...
Click to collapse
post here errors.
take screenshot from download mode
surbiks said:
post here errors.
take screenshot from download mode
Click to expand...
Click to collapse
cant take screenshot while in download mode...how?
surbiks said:
post here errors.
take screenshot from download mode
Click to expand...
Click to collapse
this is my phone info
this is the error i got when i try to flash stock rom
up
brownstyle said:
this is the error i got when i try to flash stock rom
Click to expand...
Click to collapse
if you see red line , you want flash older stock ROM, you need to download latest version , because new bootloder not allow to downgrade , if you see in download mode B:2 K:1 S:1, its means is you can flash ROM with bootloader version >= 2 , boot version >= 1 and system version >= 1 i have same problem in A5 2017.
you must download last version of ROM from here. this problem solve if you use new versions.
for other problem your RMM state is prenormal , you must wait 7 day (168 h+) without any reboot or change ROM.
surbiks said:
if you see red line , you want flash older stock ROM, you need to download latest version , because new bootloder not allow to downgrade , if you see in download mode B:2 K:1 S:1, its means is you can flash ROM with bootloader version >= 2 , boot version >= 1 and system version >= 1 i have same problem in A5 2017.
you must download last version of ROM from here. this problem solve if you use new versions.
for other problem your RMM state is prenormal , you must wait 7 day (168 h+) without any reboot or change ROM.
Click to expand...
Click to collapse
thank u for ur patience...ill try again
J6OOG updated to the last version (android 10)
stucks in boot after flashing TWRP and MAGISK
Is there a way to root it. . . .
NB: Iwas on PIE(9) ..and rooted by magisk. .
THANK's. . .
after a week of googling I finally found a tutorial on how to root another galaxy on android 10.
I tried this method on my J6 and it works.
today i will share it with you ....
but know that .....
- I am not a developer ...
- this method worked for me .. it might not for you ..
- I could not be responsible for probable damage ...
- you can always wait for an official method ...
- if you want to try it then ...... I guess you know what :
a root..bootloader..USB debugging…OEM unlock…drivers…odin..magisk..7zip ... data loss ... warranty .. and ....
I tried this method on my J600G/DS…i don’t know if it works on other variants…
1) download your latest firmware…mine is XME-J600GDXU6CTCA
2) extract it in a folder on your PC
3) check that you have enough space on your phone (+ 7GO free)
3) copy the AP file from the folder to your phone…internal or SDCard (use a USB flash disk)… cable transfer can corrupt data…
4 )Install Latest Magisk Manager and open it
5) « magisk is not installed »…tap on.. « install »..and « install » in next window…and allow…
6) navigate to your AP file and select it and wait until the process completes..
7) go to Download folder and copy “magisk_patched.tar” to your PC ..folder where firmware was extracted…
8) connect phone to PC and enter Download mode..
9) with Odin flash the 4 files..BL..CP..CSC..and in AP select “ magisk_patched.tar” file..
10) when done and system boot finished..configure your device…
11) install magisk manager again..and open it…it will say “Requires additional setup”
12) tap “OK”..wait..the device will reboot..
YOU ARE ROOTED
**download and install Busybox from Magisk..
**TitaniumBackup will crash…download “Tbcrash fixer” from “ mobilism forum ”
**download and install “debloater” module from Magisk…install “Terminal Emulator” to debloat your device…
( SU..enter…..debloat..enter )
**don’t try to install a custom recovery..device will stuck at boot..
GOOD LUCK
Did you patch the file with the same device which you used it or two different devices?
Well, i got it and it works.
Uses the magisk_patched.tar from the same device which i wanted to root.
And with a clean odin installation that should work.
bombername said:
Did you patch the file with the same device which you used it or two different devices?
Well, i got it and it works.
Uses the magisk_patched.tar from the same device which i wanted to root.
And with a clean odin installation that should work.
Click to expand...
Click to collapse
AP file patched with the same device....
four files flashed with Odin....
For information are you rooted now ?....
Yes, I have root now.
bombername said:
Yes, I have root now.
Click to expand...
Click to collapse
Glad to know that . . .
it worked bro very thanks.
I rooted my device too but only boot.tar used....
Not all AP files...
But I had a problem ... is that I cannot delete system files using link2sd or any other application .... I don't know what the problem is .... if the problem doesn't with you ... please let us know ?
THANKS
Thanks bro, you really help me!
santebien said:
after a week of googling I finally found a tutorial on how to root another galaxy on android 10.
I tried this method on my J6 and it works.
today i will share it with you ....
but know that .....
- I am not a developer ...
- this method worked for me .. it might not for you ..
- I could not be responsible for probable damage ...
- you can always wait for an official method ...
- if you want to try it then ...... I guess you know what :
a root..bootloader..USB debugging…OEM unlock…drivers…odin..magisk..7zip ... data loss ... warranty .. and ....
I tried this method on my J600G/DS…i don’t know if it works on other variants…
1) download your latest firmware…mine is XME-J600GDXU6CTCA
2) extract it in a folder on your PC
3) check that you have enough space on your phone (+ 7GO free)
3) copy the AP file from the folder to your phone…internal or SDCard (use a USB flash disk)… cable transfer can corrupt data…
4 )Install Latest Magisk Manager and open it
5) « magisk is not installed »…tap on.. « install »..and « install » in next window…and allow…
6) navigate to your AP file and select it and wait until the process completes..
7) go to Download folder and copy “magisk_patched.tar” to your PC ..folder where firmware was extracted…
8) connect phone to PC and enter Download mode..
9) with Odin flash the 4 files..BL..CP..CSC..and in AP select “ magisk_patched.tar” file..
10) when done and system boot finished..configure your device…
11) install magisk manager again..and open it…it will say “Requires additional setup”
12) tap “OK”..wait..the device will reboot..
YOU ARE ROOTED
**download and install Busybox from Magisk..
**TitaniumBackup will crash…download “Tbcrash fixer” from “ mobilism forum ”
**download and install “debloater” module from Magisk…install “Terminal Emulator” to debloat your device…
( SU..enter…..debloat..enter )
**don’t try to install a custom recovery..device will stuck at boot..
GOOD LUCK
Click to expand...
Click to collapse
Does this mean that I will never be able to use twrp recovery...is there no other way to use twrp recovery
santebien said:
after a week of googling I finally found a tutorial on how to root another galaxy on android 10.
I tried this method on my J6 and it works.
today i will share it with you ....
but know that .....
- I am not a developer ...
- this method worked for me .. it might not for you ..
- I could not be responsible for probable damage ...
- you can always wait for an official method ...
- if you want to try it then ...... I guess you know what :
a root..bootloader..USB debugging…OEM unlock…drivers…odin..magisk..7zip ... data loss ... warranty .. and ....
I tried this method on my J600G/DS…i don’t know if it works on other variants…
1) download your latest firmware…mine is XME-J600GDXU6CTCA
2) extract it in a folder on your PC
3) check that you have enough space on your phone (+ 7GO free)
3) copy the AP file from the folder to your phone…internal or SDCard (use a USB flash disk)… cable transfer can corrupt data…
4 )Install Latest Magisk Manager and open it
5) « magisk is not installed »…tap on.. « install »..and « install » in next window…and allow…
6) navigate to your AP file and select it and wait until the process completes..
7) go to Download folder and copy “magisk_patched.tar” to your PC ..folder where firmware was extracted…
8) connect phone to PC and enter Download mode..
9) with Odin flash the 4 files..BL..CP..CSC..and in AP select “ magisk_patched.tar” file..
10) when done and system boot finished..configure your device…
11) install magisk manager again..and open it…it will say “Requires additional setup”
12) tap “OK”..wait..the device will reboot..
YOU ARE ROOTED
**download and install Busybox from Magisk..
**TitaniumBackup will crash…download “Tbcrash fixer” from “ mobilism forum ”
**download and install “debloater” module from Magisk…install “Terminal Emulator” to debloat your device…
( SU..enter…..debloat..enter )
**don’t try to install a custom recovery..device will stuck at boot..
GOOD LUCK
Click to expand...
Click to collapse
THANKS MAN FINALLY same here 1 month searching finally doing this method works and i guess shold work for every device, just look for your exact rom firmware. and do the same procedure thought Odin paste the AP COPIED FROM MAGISTIK AND YOU ARE ROOTED its workin on Model SAMSUNG j600G PERFECTLY , ANY HELP IM HERE TO HELP
josephpatrick said:
Does this mean that I will never be able to use twrp recovery...is there no other way to use twrp recovery
Click to expand...
Click to collapse
YES THERE IS A WAY . I HAVE TWRP , MAGISK AND A CUSTOME ROM ANDROID 9 I FOUND HERE WITH AWESOME KERNEL AND OFFICIAL PIE 9 , IM HERE TO HELP
TWRP 3.4.0.0 for Galaxy A50 has patched Magisk v20.4. For more information about TWRP 3.4.0.0 please visit https://twrp.me/site/update/2020/06/24/twrp-3.4.0-0-released.html
Disclaimer
I'm not responsible if something went wrong on your phone(Usually nothing goes wrong). You are doing this on your own responsibility. Installing TWRP and Rooting may void warranty.
Flash TWRP and Rooting instructions:
1. Make sure the bootloader is unlocked, OEM unlock option is grey out
2. Enter Download Mode
3. 4. Flashing A50_TWRP_3.4.0.0_Magisk_Patched.tar as AP in ODIN ( uncheck "Auto Reboot" )
5. Enter TWRP Recovery for first time: Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
8. Format data.
9. Install multidisabler-samsung-2.2.zip
10. Reboot to System
11. When Samsung logo appears wait for a few seconds then press and hold volume down + power key until the screen blank
12. Enter TWRP Recovery
13. Reboot to Recovery
14. Install Magisk Manager ( connect to internet first )
15. Done!
Downloads
TWRP 3.4.0.0
multidisabler-samsung
For detail instructions WATCH THIS VIDEO https://youtu.be/30gFxuyiFqU
Credits and Thanks to:
@Darkcannibal and @santhoosh
redymedan said:
TWRP 3.4.0.0 for Galaxy A50 has patched Magisk v20.4. For more information about TWRP 3.4.0.0 please visit https://twrp.me/site/update/2020/06/24/twrp-3.4.0-0-released.html
Disclaimer
I'm not responsible if something went wrong on your phone(Usually nothing goes wrong). You are doing this on your own responsibility. Installing TWRP and Rooting may void warranty.
Flash TWRP and Rooting instructions:
1. Make sure the bootloader is unlocked, OEM unlock option is grey out
2. Enter Download Mode
3. 4. Flashing A50_TWRP_3.4.0.0_Magisk_Patched.tar as AP in ODIN ( uncheck "Auto Reboot" )
5. Enter TWRP Recovery for first time: Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
8. Format data.
9. Install multidisabler-samsung-2.2.zip
10. Reboot to System
11. When Samsung logo appears wait for a few seconds then press and hold volume down + power key until the screen blank
12. Enter TWRP Recovery
13. Reboot to Recovery
14. Install Magisk Manager ( connect to internet first )
15. Done!
Downloads
TWRP 3.4.0.0
multidisabler-samsung
For detail instructions WATCH THIS VIDEO
Credits and Thanks to:
@Darkcannibal and @santhoosh
Click to expand...
Click to collapse
Nice jo3
Hi.. your method not working on A50F - BTF1 ( A50FD )
on odin showing meassage RQT CLOSE. and FAIL
how to put twrp on my A50 , please
Jhon177 said:
Hi.. your method not working on A50F - BTF1 ( A50FD )
on odin showing meassage RQT CLOSE. and FAIL ?
how to put twrp on my A50 , please
Click to expand...
Click to collapse
Let me know your A50 model number and region?
redymedan said:
Let me know your A50 model number and region?
Click to expand...
Click to collapse
Yess thanks before for your reply.
This for detail my series A50 :
A505FXXU5BTE1
A505FDDS5BTF1
region indonesia , hope you can help me
Just info.. i do method same way like you. But always fail
( maybe because BTC4 ☹☹☹ )
Jhon177 said:
Yess thanks before for your reply.
This for detail my series A50 :
A505FXXU5BTE1
A505FDDS5BTF1
region indonesia , hope you can help me
Just info.. i do method same way like you. But always fail
( maybe because BTC4 ☹☹☹ )
Click to expand...
Click to collapse
I used A505F Indonesia too, it works for BTE1 and BTG3 (latest A505F firmware update ), It works for Android 10 firmware. I suggest you flash stock rom and then flash TWRP again
redymedan said:
I used A505F Indonesia too, it works for BTE1 and BTG3 (latest A505F firmware update ), It works for Android 10 firmware. I suggest you flash stock rom and then flash TWRP again
Click to expand...
Click to collapse
Hi redymedan.. i try justnow. Same result fail ?
on the developer option. I thick already for oem lock
Info when iam flash AP twrp : on the screen bootloader mode
( custom binary boot , blocked by OEM LOCK )
☹☹☹
Jhon177 said:
Hi redymedan.. i try justnow. Same result fail ?
on the developer option. I thick already for oem lock
Info when iam flash AP twrp : on the screen bootloader mode
( custom binary boot , blocked by OEM LOCK )
☹☹☹
Click to expand...
Click to collapse
Unlocked bootloader does not enough by enabling OEM unlocking options, you must some steps again
watch this video Unlock Bootloader https://youtu.be/8j6WkOOA3f4
twrp works on Baseband: A505FXXU5BTE1.
BuildNumber: QP1A.190711.020.A505FDDS5BTF2
Thank You
redymedan said:
Unlocked bootloader does not enough by enabling OEM unlocking options, you must some steps again
watch this video Unlock Bootloader https://youtu.be/8j6WkOOA3f4
Click to expand...
Click to collapse
HI REDYMAN i am sucses on twrp. but the problem now when i am installing multidisabler , twrp show failed
( errror installing zip file '/external sd/ ) red collor:crying::crying:
thanks for your attention reply
Jhon177 said:
HI REDYMAN i am sucses on twrp. but the problem now when i am installing multidisabler , twrp show failed
( errror installing zip file '/external sd/ ) red collor:crying::crying:
thanks for your attention reply
Click to expand...
Click to collapse
Before install multidisabler, you must format data first... I think you missed a step, please check it again
redymedan said:
Before install multidisabler, you must format data first... I think you missed a step, please check it again
Click to expand...
Click to collapse
Hi redyman , just info ??
I am suscsess for evrything about twrp on my device A50.
About multidisabler samsung.
I try direct Reboot to system
?? violaaaaaa my A50 start SETUP PHONE.
Without installing Multidisabler. And my phone runing normal nice and greattttt
Maybe on lattes firmaware no need Flash multidisabler.
Btw thank alottttts to Redymedan , for attention reply my question until sucsess flash twrp for my A50 ?? terimakasih banyakkkk bosku
Hi
I followed instructions and youtube link.
I got twrp working. But magisk manager says 'Magisk is not installed Latest: 20.4(20400)' . Magisk Manager is up to date Installed: 7.5.1 (267) Latest: 7.5.1(267)(7)
On clicking Install it offers to download zip. I downloaded the zip, went to twrp and flashed it but still it says not installed .
Edit: I have to go into twrp and select boot->recovery , this will boot with magisk. But on reboot simply it says Magisk not installed
Edit: Go to twrp -> reboot recovery. Open Magisk manager, Install -> Recommended Way, reboot. This will make rooting permanent.
Everything working
Thank You
gSingh05 said:
Hi
I followed instructions and youtube link.
I got twrp working. But magisk manager says 'Magisk is not installed Latest: 20.4(20400)' . Magisk Manager is up to date Installed: 7.5.1 (267) Latest: 7.5.1(267)(7)
On clicking Install it offers to download zip. I downloaded the zip, went to twrp and flashed it but still it says not installed .
Edit: I have to go into twrp and select boot->recovery , this will boot with magisk. But on reboot simply it says Magisk not installed
Edit: Go to twrp -> reboot recovery. Open Magisk manager, Install -> Recommended Way, reboot. This will make rooting permanent.
Everything working
Thank You
Click to expand...
Click to collapse
That is long story I think, as I am not wrong in after android 8 or 9 above, It caused partition structure. In android 8 above partition structure has changed, we can not install magisk manually in TWRP anymore, we must patch it in recovery.img, repack recovery.img, boot.img and vbmeta.img to be flashable tar file then flash it. It looks no solution until now..
HELP
Jhon177 said:
HI REDYMAN i am sucses on twrp. but the problem now when i am installing multidisabler , twrp show failed
( errror installing zip file '/external sd/ ) red collor:crying::crying:
thanks for your attention reply
Click to expand...
Click to collapse
COULD YOU SOLVE IT? I AM ALSO GENTLE, DOES NOT INSTALL MULTIDISABLER :crying:
Mortives said:
COULD YOU SOLVE IT? I AM ALSO GENTLE, DOES NOT INSTALL MULTIDISABLER :crying:
Click to expand...
Click to collapse
Please show me the error message or screenshot of its... I did not face any issue when install multidisabler..
Mortives said:
COULD YOU SOLVE IT? I AM ALSO GENTLE, DOES NOT INSTALL MULTIDISABLER :crying:
Click to expand...
Click to collapse
For me. Done. I think if you use lattest firmware / juni security patch.
No need samsung multidisabler.
On twrp
Just format data -
Swipe to factory reset
Reboot to recovery.
Install magisk manager done. ?
That my experience.
( that also true until now I am not succes to flash multidisabler ,but everything work fine without multidisabler ,
bener bro gak bisa . Tulisannya error merah saat flash zip sd card )
BOHEMIA840 said:
@redymedan
Click to expand...
Click to collapse
Not tested, I am not sure it will work.. but you can try to test it
I am using 3.3.1.3. The process is the same? even if I already have the twrp?
i'm having problem to boot in twrp it doesn't open i tried every way above and success once or twice only and after i granted su i rebooted then i lost su again