This device is more reasonable to buy as it is small and elegant at a decent price.
It is IP68 water-friendly device and the display is much better - higher FPS than on higher resolution OLEDs - good for action games.
Root using CF-autoroot
Download the file from CF-auto-root repository:
https://download.chainfire.eu/1090/CF-Root/CF-Auto-Root/CF-Auto-Root-a3y17lte-a3y17ltexx-sma320f.zip
WARNING! KNOKX will be: tripped. E-fuse: << BLOWN >> Warranty: VOID!
If you have Nougat or after update to Android 7.0:
https://download.chainfire.eu/1090/CF-Root/CF-Auto-Root/CF-Auto-Root-a3y17lte-a3y17ltexx-sma320f.zip
Wipe data + cache before
Flash CF-autoroot before device initial configuration
WARNING! KNOKX will be: tripped. E-fuse: << BLOWN >> Warranty: VOID!
Click to expand...
Click to collapse
Unzip the file
Run Odin from the unzipped folder
Browse by clicking AP button the *.md5 file from the unzipped folder
Connect the A320F in download mode (start the device by holding Power+Home+Volume DOWN)
After starting the device in download mode, press Volume UP one to allow the download
A new COM port should be recognized by Odin after the device is connected via USB
Press Start button in in Odin
Rooting will take place automatically and the device will restart twice.
After the first restart you can disconnect the cable from the PC.
Second restart might take a few minutes.
After that you will find the SuperSU app installed.
Other, more complicated methods:
Rooting using custom recovery:
You will need:
SM-A320F with Exynos CPU (waiting for updates on other model)
Android Marshmallow 6.0.1 on your device
Odin v3.0.4 (download link below)
Team Win Recovery Project - TWRP (download link here) or ClockWork Mod Custom Recovery - CWM (download link below)
(Recommended custom recovery: Team Win Recovery Project :good: - more features, newer, works better)
SuperSU-v2.79-201612051815 (latest ZIP version available today - download link below)
SM-A320F TWRP & CWM recovery installation procedure:
On your device enable developer options and then disable OEM lock (FRP lock) for the device to allow you to flash custom recovery
(Activate OEM unlock from developer options menu)
Boot your device in Odin downlaod mode (hold VolDOWN + Home + Power)
Flash the *.tar file of TWRP or for the CWM using Odin's PDA option
(Uncheck Auto Reboot and F. Reset Time)
Force reboot your device (hold VolDOWN + Power for 10 seconds)
SM-A320F SuperSU ZIP installation procedure:
Copy SuperSU-v2.79-201612051815.zip on a microSD card (trough USB data cable or any other method)
Unplug the USB data cable from the phone and shut down the device
Start your device in Recovery mode (Hold VolUP + Home + Power)
(RECOVERY IS NOT SEANDROID ENFORCED - this warning is normal when booting into CWM custom recovery but not with TWRP)
The recovery menu will appear
> Using TWRP Recovery:
Swipe to allow modifications
Tap on Install
Tap on Select Storage at the bottom and select MicroSDCard then tap OK
Browse for the SuperSU-v2.79-201612051815.zip and tap on it to install it
Swipe to install SuperSU (confirm Flash)
> Using CWM Recovery:
Select Install zip update package (use VolDOWN/VolUP to navigate and Power to select)
Select Choose zip from sdcard
Select SuperSU-v2.79-201612051815.zip and press Power to install Super SU
The installation will perform automatically and the device will reboot twice.
First reboot will take longer. Please be patient. After the second reboot you will have SuperSU and root.
Downsides/bugs:
Knox will be tripped the second you flash a custom recovery (Warranty void: 1 - non reversibile)
(That means that you will lose the warranty for your device and that can not be changed)
(Perhaps that's why I personally can't invest more than $300 in a Samsung cellphone ever)
You won't be able to use Knox-related functions including Secure Folder ever again
Because of a SuperSU bug you won't be able to use Smart View (Miracast, project the screen to smart TV) unless you make an edit as follows:
Lewdog45 said:
Use a file browser such as Root Browser and go to the root of your device then locate the "System" folder and find build.prop and edit it with any application that can edit it and find the bottom line, right at the edge of the bottom line you need to press enter twice and then paste this:
wlan.wfd.hdcp=disable
And then save it and reboot your device.
Click to expand...
Click to collapse
Special thanks to: ashyx for compiling and updating TWRP recovery for SM-A320F and to XN Logos for providing compatible CWM recovery with SM-A320F.
Please feel free to post your attempts on rooting this device and the results. If other methods will show-up I will include them up here.
jnflos said:
Up to this point there is no success in rooting the Galaxy A3 2017 device.
This device is more reasonable to buy as it is small and elegant at a decent price.
Unfortunately there is no sign of working root method for the device.
Please feel free to update this topic with your attempts on rooting this device, and if success will strike, it will float up here for everyone to see.
Click to expand...
Click to collapse
+1
Thanks to developpers
News good, this one is Working , root cwm for galaxy A3 2017 Sm-A320F,
hit a Thanks if i helped you,
Here
I tried this morning without succes
copernic75 said:
I tried this morning without succes
Click to expand...
Click to collapse
Why didn't it work? Any errors in Odin?
No error in odin.
When i tried To reboot in revovery mode i don't have access to cmw .. just Android error message + Knox error
XN Logos said:
News good, this one is Working , root cwm for galaxy A3 2017 Sm-A320F,
hit a Thanks if i helped you,
Click to expand...
Click to collapse
Thanks! I will test this on my Galaxy SM-A320FL (single sim) to see...
Root was successful! I will update the first post with the mini tutorial and the files needed
REMOVED
I have indeed a a320-FL french model... Exynos inside.
What do you suggest?
jnflos said:
Root was successful! I will update the first post with the mini tutorial and the files needed
Click to expand...
Click to collapse
This cwm worked for Exynos?
tys0n said:
This cwm worked for Exynos?
Click to expand...
Click to collapse
Yes it worked. Please follow the tutorial that I wrote on the first post.
jnflos said:
Yes it worked. Please follow the tutorial that I wrote on the first post.
Click to expand...
Click to collapse
Ok good then I will remove my earlier post. I don't have the device so I can't try it.
I tried again this morning with success!
I can have access to recovery but not to sd card (internal or no)... so I can't root the device.
Any idea?
copernic75 said:
I tried again this morning with success!
I can have access to recovery but not to sd card (internal or no)... so I can't root the device.
Any idea?
Click to expand...
Click to collapse
Format the SD card on your PC using FAT32 option (use an USB adapter).
Copy the zip on the card, Insert it into the phone and reboot into recovery to test.
Yes... that's what I did. I found the solution into Google.
Thanks anyway for your help.
Do you think that it will be possible to install TWRP instead of CWM in recovery?
copernic75 said:
Yes... that's what I did. I found the solution into Google.
Thanks anyway for your help.
Do you think that it will be possible to install TWRP instead of CWM in recovery?
Click to expand...
Click to collapse
Yes. You can flash twrp in cwm and reboot to recovery. Twrp will be there instead.
wich version to choose?
Sorry. There's no twrp for a320 yet, but in general it's working fine to flash new recovery with existing one.
Hey guys, I will receive my a3 2017 soon and I was wondering if it would be preferable to root it now than waiting for the update to Nougat and re-root it then... Any idea when the update will be available for this phone? I was also wondering if I should use a specific brand or type of micro sd card with this phone?
Thanks
Related
Root Galaxy Grand Prime G531H
Download This File And Extract
https://drive.google.com/open?id=0B41td9n4b4IaMUYtNHNSSVV2ZEk
Copy SuperSU-Pro-v2.46-Patched Zip File On Sd Card
restart in Download Mood. Volume Down+Power+Home same Time
Open Odin And Connect Phone With Pc
Open AP And Locate recovery.tar.md5 File in download folder
now start,,
After Done Reboot in Recovery, Volume UP+Power+Home
Slide Baar to enter TWRP
Flash SuperSU-Pro-v2.46-Patched Zip File In SD CARD
now restart System
Open Su And Install On PLAY STORE And Update Normal And Restart Phone
Now U Done Root...
Muhammad Nadeem
Say Thanks
if u want twrp
after flash this teamwin recovery 3.0.0.0
https://drive.google.com/open?id=0B41td9n4b4IaVldfN1hkNGxING8
flash via odine , chang language after
Worked for me
Thanks
Worked for me
But please can you give me a custom kernel file for this device SM G531H
because i want to change SElinux mode to permissive
Mahmoud11111 said:
Worked for me
But please can you give me a custom kernel file for this device SM G531H
because i want to change SElinux mode to permissive
Click to expand...
Click to collapse
sorry bro i d'nt have, but i send soon
try this man
http://forum.xda-developers.com/grand-prime/general/samsung-galaxy-grand-prime-ve-g531h-t3295706
i don,t try but u done and tell me, thanks
ndm4ompk said:
Root Galaxy Grand Prime G531H
Download This File And Extract
https://drive.google.com/open?id=0B41td9n4b4IaMUYtNHNSSVV2ZEk
Copy SuperSU-Pro-v2.46-Patched Zip File On Sd Card
restart in Download Mood. Volume Down+Power+Home same Time
Open Odin And Connect Phone With Pc
Open AP And Locate recovery.tar.md5 File in download folder
now start,,
After Done Reboot in Recovery, Volume UP+Power+Home
Slide Baar to enter TWRP
Flash SuperSU-Pro-v2.46-Patched Zip File In SD CARD
now restart System
Open Su And Install On PLAY STORE And Update Normal And Restart Phone
Now U Done Root...
Muhammad Nadeem
Say Thanks
if u want twrp
after flash this teamwin recovery 3.0.0.0
https://drive.google.com/open?id=0B41td9n4b4IaVldfN1hkNGxING8
flash via odine , chang language after
Click to expand...
Click to collapse
Twrp worked but supersu didn't work (after flash supersu via twrp my phone went into bootloop):what:
@Elie.G said:
Twrp worked but supersu didn't work (after flash supersu via twrp my phone went into bootloop):what:
Click to expand...
Click to collapse
flash stock rom tar via odine uncheck auto reboot, after flash pull battery and insert it now go stock recovery with press
volume up+home+power key and do factory data rest and cache and now in download mode and do it again..
(only do first not flash twrp 3.0..0.0)
(first u on g531h)
Thanks! Mr. ndm4ompk!! (original poster's name)
It WORKED for me!!!
After searching for 3 months,
I've finally found a working ROOT solution for Grand Prime G531H.
I want to thank the author and want to write step-by-step how I followed him.
------------------
Below I've refined the original manual:
Step 1. Prepare your phone for rooting process.
On computer, copy SuperSU-Pro-v2.46-Patched zip file onto SD card.
On phone, go to Settings --> Developer Options --> Check the Manufacturer unlock :::: This will turn off a lock
On phone, hit the Volume Down+Power+Home at the same time :::: This will Initiate Download mode on Grand Prime
Step 2. Use Odin
On computer, open Odin. Connect your Phone to PC :::: Odin will recognize your device in Download mode
On Odin, click AP --> choose recovery.tar.md5 file --> click 'Start' on Odin. :::: Odin will start working and your phone will auto-reboot when it finishes
Step 3. Install SuperSU
On phone, hit the Volume UP+Power+Home --> slide the bar to continue :::: This will enter TWRP (recovery)
On TWRP, click install --> choose SuperSU-Pro-v2.46-Patched zip file in SD card --> slide the bar --> hit restart :::: This will install SuperSU and phone will restart
Step 4. Optimize your root!
On phone, open SuperSU app --> click PLAY STORE (to update/install via Play store) ---> hit update/install (in Play store).
Open SuperSU app again --> Update Normal --> hit Restart phone.
This finishes the last step of rooting. Your phone is rooted!
*You can check with Root Checker Basic app.
mellomilky said:
Thanks! Mr. ndm4ompk!! (original poster's name)
It WORKED for me!!!
After searching for 3 months,
I've finally found a working ROOT solution for Grand Prime G531H.
I want to thank the author and want to write step-by-step how I followed him.
------------------
Below I've refined the original manual:
Step 1. Prepare your phone for rooting process.
On computer, copy SuperSU-Pro-v2.46-Patched zip file onto SD card.
On phone, go to Settings --> Developer Options --> Check the Manufacturer unlock :::: This will turn off a lock
On phone, hit the Volume Down+Power+Home at the same time :::: This will Initiate Download mode on Grand Prime
Step 2. Use Odin
On computer, open Odin. Connect your Phone to PC :::: Odin will recognize your device in Download mode
On Odin, click AP --> choose recovery.tar.md5 file --> click 'Start' on Odin. :::: Odin will start working and your phone will auto-reboot when it finishes
Step 3. Install SuperSU
On phone, hit the Volume UP+Power+Home --> slide the bar to continue :::: This will enter TWRP (recovery)
On TWRP, click install --> choose SuperSU-Pro-v2.46-Patched zip file in SD card --> slide the bar --> hit restart :::: This will install SuperSU and phone will restart
Step 4. Optimize your root!
On phone, open SuperSU app --> click PLAY STORE (to update/install via Play store) ---> hit update/install (in Play store).
Open SuperSU app again --> Update Normal --> hit Restart phone.
This finishes the last step of rooting. Your phone is rooted!
*You can check with Root Checker Basic app.
Click to expand...
Click to collapse
When i try the 3 step doesnt apeer the twrp recovery, on previous step seem to be all ok.
Thanks millomilky, my english is not good but u explain it very well, thanks again and i appreciate your work,,
Sent from my SM-G900V using XDA Free mobile app
In step 3 1st time apear a slide bar, slide it right to enter twrp,
Sent from my SM-G900V using XDA Free mobile app
ndm4ompk said:
sorry bro i d'nt have, but i send soon
try this man
http://forum.xda-developers.com/grand-prime/general/samsung-galaxy-grand-prime-ve-g531h-t3295706
i don,t try but u done and tell me, thanks
Click to expand...
Click to collapse
Unfortunately , this custom kernel is not compatible with my device , my device stucked at boot and said "kernel is not seandroid enforcing"
So i restored my stock kernel again which i backed it up.
Please anyone have any ideas about changing SElinux mode to permissive on this phone SM-G531H don't forget me
I tried selinux mode changer app and terminal emulator but doesn't work for me
Ok i m trying find like u,,
Sent from my SM-G900V using XDA Free mobile app
Is this thread works on AOK2?
Finally, My phone has been rooted now
Now. I just need the touchwiz music player for this device.
Because This device doesn't have the default (music player).
If u have g531h then answer is yes,
Sent from my SM-G900V using XDA Free mobile app
thank you
It is one hundred percent secure :good:
Now I feel the freedom that search for it three months ago
Zainelabdeen said:
thank you
It is one hundred percent secure :good:
Now I feel the freedom that search for it three months ago
Click to expand...
Click to collapse
Thanks Zain
Does this method work in the sm-g531h/dl variant?
I ask because i have a problem recently with a recovery for the sm-g316ml/ds. I flash a recovery for the sm-g316ml and it didnt work. thanks in advance
thanks before
mellomilky said:
Thanks! Mr. ndm4ompk!! (original poster's name)
It WORKED for me!!!
After searching for 3 months,
I've finally found a working ROOT solution for Grand Prime G531H.
I want to thank the author and want to write step-by-step how I followed him.
------------------
Below I've refined the original manual:
Step 1. Prepare your phone for rooting process.
On computer, copy SuperSU-Pro-v2.46-Patched zip file onto SD card.
On phone, go to Settings --> Developer Options --> Check the Manufacturer unlock :::: This will turn off a lock
No developer option menu on my g531h.
I have failed block by frp lock
Click to expand...
Click to collapse
riefers212 said:
mellomilky said:
Thanks! Mr. ndm4ompk!! (original poster's name)
It WORKED for me!!!
After searching for 3 months,
I've finally found a working ROOT solution for Grand Prime G531H.
I want to thank the author and want to write step-by-step how I followed him.
------------------
Below I've refined the original manual:
Step 1. Prepare your phone for rooting process.
On computer, copy SuperSU-Pro-v2.46-Patched zip file onto SD card.
On phone, go to Settings --> Developer Options --> Check the Manufacturer unlock :::: This will turn off a lock
No developer option menu on my g531h.
I have failed block by frp lock
Click to expand...
Click to collapse
This picture might help. Screenshot is taken from G531H that I rooted using this guide.
Rooting on some other devices does not require turning-off FRP lock.
But it's always better to turn-off FRP lock (to check Manufacturer unlock).
Click to expand...
Click to collapse
How to Root Galaxy Note 7
First of all big big thanks to @Chainfire for making this possible and effort he took to made this without own device.
Right now no multiple methods are available so writing here simple easiest method available to root Note7.
1. You will require TWRP (ignore if you already have it)
How to Flash TWRP ?
- Download Odin 3.12.3 or higher
- Next you required id TWRP recovery. If you already have one then skip this, otherwise download TWRP for your device and flash using Odin. In case Odin Fail during flash, reboot to recovery - wipe cache and try again. Here is original thread for TWRP support.
- Download Latest SuperSu 2.77 OR Newer if any available from this original thread.
- Copy SuperSu zip you have downloaded to SD card OR USB OTG drive
- Now Flashing TWRP
Open Odin - Select TWRP tar file you have downloaded above with AP tab of odin. Reboot tour device to download mode. (Switch Off device - Vol down + Power + Home - keep pressing till you show download mode screen pre message. - Press volume up when asked to continue) Now you will see downloading screen.
Connect device - Go to Option menu of Odin - Uncheck Auto reboot and keep rest of options as it is.
Now Flash (Start)
When Odin display message about flashing finished (Passed) - Disconnect the device and ling press Vol down + Power
As soon as display turns off, Press Vol Up + Power + Home.
This will boot your device to recovery and you will have TWRP instaed of stock recovery.
IMPORTANT : In case Odin say Fail while flashing TWRP, DON'T BE PANIC but simply reboot to recovery and clear cache and repeat procedure.
Select - Install then - Select Storage - here select according you have copied your SuperSu zip depending on Sd card or USB
Navigate to Supersu zip and select to flash (swipe to right)
Keep patience for few minute and reboot device (to system) when flashing done
Check Supersu app in drwaer.
Your device should have root access now.
Once you have root access DON'T FORGET TO MAKE EFS BACKUP EFS Backup Thread.
reserved
Reserved
Closing thread now and will be up when ready
Awesome work Doc!
Will this work on Tmobile?
Thank you very much
Sent from my SM-N930F using Tapatalk
Should specify which models your method is for. This way could potentially make paper weights out of North American models! This method and recovery is for Exynos processors only!
Process should remain same ( Provided your BL isn't locked) but just you need recovery for your device.
I have edited OP and linked to general page of TWRP download instead of F/FD
has anyone confirmed this working on the 930fd model??
eyesofice said:
has anyone confirmed this working on the 930fd model??
Click to expand...
Click to collapse
Don't worry mine have N930FD only
dr.ketan said:
Don't worry mine have N930FD only
Click to expand...
Click to collapse
So you were able to root your 930FD with this method?
This of course trips Knox and invalidates warranty?
Sent from my Nexus 6P using Tapatalk
Dr.Ketan, really appreciate for your details explain for getting root, this will be the first time I did it by myself with following your instructions step by step, my 930FD just rooted and keep testing if there is any problem for it.
Same usual question. Will this trip the KNOX?
iom_jack said:
Same usual question. Will this trip the KNOX?
Click to expand...
Click to collapse
Obviously.
It's kind of funny how the SD model can be rooted and keep its warranty. But the Version with the Unlocked BL wiil be void when rooted. Wish we could just combine both.
Batfink33 said:
This of course trips Knox and invalidates warranty?
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Naturally
Sent from my SM-N930F using Tapatalk
anyway to root using a Mac?
skirocket said:
anyway to root using a Mac?
Click to expand...
Click to collapse
Same thing -.-
Does this work on N930X?
Here is the TWRP for Samsung galaxy on8 (exynos 7580)
working on Nougat...
You flash this at your own risk. Please ensure you have the stock ROM to hand downloaded from SAMMOBILE in case of problems. This will trip the knox counter.
WHAT IS TWRP?
Oh come on, you know what it is - don't try to fool me!
In case you're serious, though...
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
FULL STEPS FOR OBTAINING ROOT
In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Now go to Settings -> Developer options. (above About device)
You need to enable OEM unlock, otherwise you might end up with boot problems or be unable to flash later on.
Make sure your don't have Factory Reset Protection enabled in your Google account or you may never be able to boot again!
More information: https://support.google.com/nexus/answer/6172890?hl=en
Extract Odin_3.10.7.zip to your computer.
Install Samsung Mobile Phone Drivers for Odin to find your device.
Download a .tar image of TWRP for j7xelte.
Reboot your device into Download mode. To do this, select reboot from the power menu and hold the [Volume Down] + [Home] buttons while your device reboots.
Once you reach the Download mode warning screen, press [Volume Up] to continue.
Open Odin and place that TWRP tar file in the [AP] slot, under Options tab disable Auto Reboot, then press [Start].
Once the flash is complete (Odin should tell you in the log, and progress bar on phone should stop), you can pull the battery then place the battery back in. Now hold [Volume Up] + [Home] + [Power] buttons until you reach recovery mode.
If you end up in stock recovery, start again from download mode step.
At this point, you will reach the screen asking you if you want to allow system modifications.
You will want to swipe to allow, otherwise the OS will replace TWRP once you boot!
If you want to be rooted with SuperSU:
FEATURES
MTP support
USB Mass Storage support
Micro SDcard and USB OTG storage support
f2fs file system support (read, write, format, backup & restore)
exFAT file system support (read, write, format, backup & restore)
NTFS file system support (read, write, format)
ADB root
Full SELinux support
working on android Nougat
To Root:
Flash the latest SuperSU release with TWRP:
https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133/
Custom ROMs soon....
DOWNLOAD:
TWRP: twrp_sm-j710fn_08102017
https://drive.google.com/open?id=0B_WQYdmgperrUTI2UGhsUUdNbXM
(updated on 08 october 2017)
Credits: jcadduono, ashyx, doulc, TeamWin
Please note I own this device and spend a lot of my free time bringing these builds for you to use and benefit from.
DONT DONATE ME.. JUST PRESS THANKS BUTTON THAT'S ALL I WANT..
Bro nice but on8 aldready has it
Oves786 said:
Bro nice but on8 aldready has it
Click to expand...
Click to collapse
lot of bugs in that build.. internal storage not mounting.. not working in nougat os..
Xpose
Bro in nougat xpose is not working, sd/system is not mounting...plz fix it
mmxandy said:
lot of bugs in that build.. internal storage not mounting.. not working in nougat os..
Click to expand...
Click to collapse
No reported bugs in that build at all except CPEFS partition mount error(which isn't really a bug). Internal storage not mounting has absolutely nothing to do with TWRP. Unless you have some how managed to overcome Samsung's encryption or the /data partition is Formatted its still going to be unmountable.
All this is clearly pointed out in the thread, but I guess if people choose not to read...well.
can u upload the code to github for ease of modification, commit, update etc?
What is the version of this twrp? @mmxandy
You upload the wrong file is it? This is a stock recovery
ashyx said:
No reported bugs in that build at all except CPEFS partition mount error(which isn't really a bug). Internal storage not mounting has absolutely nothing to do with TWRP. Unless you have some how managed to overcome Samsung's encryption or the /data partition is Formatted its still going to be unmountable.
All this is clearly pointed out in the thread, but I guess if people choose not to read...well.
Click to expand...
Click to collapse
updated please check...
mmxandy said:
updated please check...
Click to expand...
Click to collapse
u should leave a thanks to me, if I didn't mention it no one will notice.
And I sent u a pm would be great if u can reply me
I am not a professional developer.. i created this recovery for my own phone.. i think it is useful to others.. that's why i shared it.. and i am not asking for donations..
i mentioned thanks..
Hi, I have been asking for help on increasing the in call volume for the On8. Can anyone help ? I have rooted the device using the above method.
Thanks.
Deepak
bro thanku and i want to ask is there any rom available for galaxy on8...????
lineageos and rr rom galaxy on 8
bro I had ported 2 roms for galaxy on 8 but when i flash screen goes black and again boot into twrp this recovery cant flash the roms
links will be updated soon
---------- Post added at 08:24 AM ---------- Previous post was at 08:11 AM ----------
two roms availabe ported by me lineage os rr rom
SM-J710FN
Does it really works on it, because I find only 6.0.1 version
Can anyone help Me with my lost details on Memo as I cant restore my lost details on my Samsung On 8 phone
Sanjok Lama said:
Can anyone help Me with my lost details on Memo as I cant restore my lost details on my Samsung On 8 phone
Click to expand...
Click to collapse
Use custom rom
Currently best one is 7.1.1 SE if you want to know more just On8 group here
---------- Post added at 04:04 AM ---------- Previous post was at 04:03 AM ----------
Please update the device tree for On8
I want to build TWRP with latest sources.
mmxandy said:
Here is the TWRP for Samsung galaxy on8 (exynos 7580)
working on Nougat...
You flash this at your own risk. Please ensure you have the stock ROM to hand downloaded from SAMMOBILE in case of problems. This will trip the knox counter.
WHAT IS TWRP?
Oh come on, you know what it is - don't try to fool me!
In case you're serious, though...
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
FULL STEPS FOR OBTAINING ROOT
In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Now go to Settings -> Developer options. (above About device)
You need to enable OEM unlock, otherwise you might end up with boot problems or be unable to flash later on.
Make sure your don't have Factory Reset Protection enabled in your Google account or you may never be able to boot again!
More information: https://support.google.com/nexus/answer/6172890?hl=en
Extract Odin_3.10.7.zip to your computer.
Install Samsung Mobile Phone Drivers for Odin to find your device.
Download a .tar image of TWRP for j7xelte.
Reboot your device into Download mode. To do this, select reboot from the power menu and hold the [Volume Down] + [Home] buttons while your device reboots.
Once you reach the Download mode warning screen, press [Volume Up] to continue.
Open Odin and place that TWRP tar file in the [AP] slot, under Options tab disable Auto Reboot, then press [Start].
Once the flash is complete (Odin should tell you in the log, and progress bar on phone should stop), you can pull the battery then place the battery back in. Now hold [Volume Up] + [Home] + [Power] buttons until you reach recovery mode.
If you end up in stock recovery, start again from download mode step.
At this point, you will reach the screen asking you if you want to allow system modifications.
You will want to swipe to allow, otherwise the OS will replace TWRP once you boot!
If you want to be rooted with SuperSU:
FEATURES
MTP support
USB Mass Storage support
Micro SDcard and USB OTG storage support
f2fs file system support (read, write, format, backup & restore)
exFAT file system support (read, write, format, backup & restore)
NTFS file system support (read, write, format)
ADB root
Full SELinux support
working on android Nougat
To Root:
Flash the latest SuperSU release with TWRP:
https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133/
Custom ROMs soon....
DOWNLOAD:
TWRP: twrp_sm-j710fn_08102017
https://drive.google.com/open?id=0B_WQYdmgperrUTI2UGhsUUdNbXM
(updated on 08 october 2017)
Credits: jcadduono, ashyx, doulc, TeamWin
Please note I own this device and spend a lot of my free time bringing these builds for you to use and benefit from.
DONT DONATE ME.. JUST PRESS THANKS BUTTON THAT'S ALL I WANT..
Click to expand...
Click to collapse
mmxandy said:
Here is the TWRP for Samsung galaxy on8 (exynos 7580)
working on Nougat...
You flash this at your own risk. Please ensure you have the stock ROM to hand downloaded from SAMMOBILE in case of problems. This will trip the knox counter.
WHAT IS TWRP?
Oh come on, you know what it is - don't try to fool me!
In case you're serious, though...
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
FULL STEPS FOR OBTAINING ROOT
In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Now go to Settings -> Developer options. (above About device)
You need to enable OEM unlock, otherwise you might end up with boot problems or be unable to flash later on.
Make sure your don't have Factory Reset Protection enabled in your Google account or you may never be able to boot again!
More information: https://support.google.com/nexus/answer/6172890?hl=en
Extract Odin_3.10.7.zip to your computer.
Install Samsung Mobile Phone Drivers for Odin to find your device.
Download a .tar image of TWRP for j7xelte.
Reboot your device into Download mode. To do this, select reboot from the power menu and hold the [Volume Down] + [Home] buttons while your device reboots.
Once you reach the Download mode warning screen, press [Volume Up] to continue.
Open Odin and place that TWRP tar file in the [AP] slot, under Options tab disable Auto Reboot, then press [Start].
Once the flash is complete (Odin should tell you in the log, and progress bar on phone should stop), you can pull the battery then place the battery back in. Now hold [Volume Up] + [Home] + [Power] buttons until you reach recovery mode.
If you end up in stock recovery, start again from download mode step.
At this point, you will reach the screen asking you if you want to allow system modifications.
You will want to swipe to allow, otherwise the OS will replace TWRP once you boot!
If you want to be rooted with SuperSU:
FEATURES
MTP support
USB Mass Storage support
Micro SDcard and USB OTG storage support
f2fs file system support (read, write, format, backup & restore)
exFAT file system support (read, write, format, backup & restore)
NTFS file system support (read, write, format)
ADB root
Full SELinux support
working on android Nougat
To Root:
Flash the latest SuperSU release with TWRP:
https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133/
Custom ROMs soon....
DOWNLOAD:
TWRP: twrp_sm-j710fn_08102017
https://drive.google.com/open?id=0B_WQYdmgperrUTI2UGhsUUdNbXM
(updated on 08 october 2017)
Credits: jcadduono, ashyx, doulc, TeamWin
Please note I own this device and spend a lot of my free time bringing these builds for you to use and benefit from.
DONT DONATE ME.. JUST PRESS THANKS BUTTON THAT'S ALL I WANT..
Click to expand...
Click to collapse
https://drive.google.com/open?id=0B_WQYdmgperrUTI2UGhsUUdNbXM Link is not working help plz cuz my device not starting stuck on startup!!!
TWRP 3.4.0.0 for Galaxy A50 has patched Magisk v20.4. For more information about TWRP 3.4.0.0 please visit https://twrp.me/site/update/2020/06/24/twrp-3.4.0-0-released.html
Disclaimer
I'm not responsible if something went wrong on your phone(Usually nothing goes wrong). You are doing this on your own responsibility. Installing TWRP and Rooting may void warranty.
Flash TWRP and Rooting instructions:
1. Make sure the bootloader is unlocked, OEM unlock option is grey out
2. Enter Download Mode
3. 4. Flashing A50_TWRP_3.4.0.0_Magisk_Patched.tar as AP in ODIN ( uncheck "Auto Reboot" )
5. Enter TWRP Recovery for first time: Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
8. Format data.
9. Install multidisabler-samsung-2.2.zip
10. Reboot to System
11. When Samsung logo appears wait for a few seconds then press and hold volume down + power key until the screen blank
12. Enter TWRP Recovery
13. Reboot to Recovery
14. Install Magisk Manager ( connect to internet first )
15. Done!
Downloads
TWRP 3.4.0.0
multidisabler-samsung
For detail instructions WATCH THIS VIDEO https://youtu.be/30gFxuyiFqU
Credits and Thanks to:
@Darkcannibal and @santhoosh
redymedan said:
TWRP 3.4.0.0 for Galaxy A50 has patched Magisk v20.4. For more information about TWRP 3.4.0.0 please visit https://twrp.me/site/update/2020/06/24/twrp-3.4.0-0-released.html
Disclaimer
I'm not responsible if something went wrong on your phone(Usually nothing goes wrong). You are doing this on your own responsibility. Installing TWRP and Rooting may void warranty.
Flash TWRP and Rooting instructions:
1. Make sure the bootloader is unlocked, OEM unlock option is grey out
2. Enter Download Mode
3. 4. Flashing A50_TWRP_3.4.0.0_Magisk_Patched.tar as AP in ODIN ( uncheck "Auto Reboot" )
5. Enter TWRP Recovery for first time: Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
8. Format data.
9. Install multidisabler-samsung-2.2.zip
10. Reboot to System
11. When Samsung logo appears wait for a few seconds then press and hold volume down + power key until the screen blank
12. Enter TWRP Recovery
13. Reboot to Recovery
14. Install Magisk Manager ( connect to internet first )
15. Done!
Downloads
TWRP 3.4.0.0
multidisabler-samsung
For detail instructions WATCH THIS VIDEO
Credits and Thanks to:
@Darkcannibal and @santhoosh
Click to expand...
Click to collapse
Nice jo3
Hi.. your method not working on A50F - BTF1 ( A50FD )
on odin showing meassage RQT CLOSE. and FAIL
how to put twrp on my A50 , please
Jhon177 said:
Hi.. your method not working on A50F - BTF1 ( A50FD )
on odin showing meassage RQT CLOSE. and FAIL ?
how to put twrp on my A50 , please
Click to expand...
Click to collapse
Let me know your A50 model number and region?
redymedan said:
Let me know your A50 model number and region?
Click to expand...
Click to collapse
Yess thanks before for your reply.
This for detail my series A50 :
A505FXXU5BTE1
A505FDDS5BTF1
region indonesia , hope you can help me
Just info.. i do method same way like you. But always fail
( maybe because BTC4 ☹☹☹ )
Jhon177 said:
Yess thanks before for your reply.
This for detail my series A50 :
A505FXXU5BTE1
A505FDDS5BTF1
region indonesia , hope you can help me
Just info.. i do method same way like you. But always fail
( maybe because BTC4 ☹☹☹ )
Click to expand...
Click to collapse
I used A505F Indonesia too, it works for BTE1 and BTG3 (latest A505F firmware update ), It works for Android 10 firmware. I suggest you flash stock rom and then flash TWRP again
redymedan said:
I used A505F Indonesia too, it works for BTE1 and BTG3 (latest A505F firmware update ), It works for Android 10 firmware. I suggest you flash stock rom and then flash TWRP again
Click to expand...
Click to collapse
Hi redymedan.. i try justnow. Same result fail ?
on the developer option. I thick already for oem lock
Info when iam flash AP twrp : on the screen bootloader mode
( custom binary boot , blocked by OEM LOCK )
☹☹☹
Jhon177 said:
Hi redymedan.. i try justnow. Same result fail ?
on the developer option. I thick already for oem lock
Info when iam flash AP twrp : on the screen bootloader mode
( custom binary boot , blocked by OEM LOCK )
☹☹☹
Click to expand...
Click to collapse
Unlocked bootloader does not enough by enabling OEM unlocking options, you must some steps again
watch this video Unlock Bootloader https://youtu.be/8j6WkOOA3f4
twrp works on Baseband: A505FXXU5BTE1.
BuildNumber: QP1A.190711.020.A505FDDS5BTF2
Thank You
redymedan said:
Unlocked bootloader does not enough by enabling OEM unlocking options, you must some steps again
watch this video Unlock Bootloader https://youtu.be/8j6WkOOA3f4
Click to expand...
Click to collapse
HI REDYMAN i am sucses on twrp. but the problem now when i am installing multidisabler , twrp show failed
( errror installing zip file '/external sd/ ) red collor:crying::crying:
thanks for your attention reply
Jhon177 said:
HI REDYMAN i am sucses on twrp. but the problem now when i am installing multidisabler , twrp show failed
( errror installing zip file '/external sd/ ) red collor:crying::crying:
thanks for your attention reply
Click to expand...
Click to collapse
Before install multidisabler, you must format data first... I think you missed a step, please check it again
redymedan said:
Before install multidisabler, you must format data first... I think you missed a step, please check it again
Click to expand...
Click to collapse
Hi redyman , just info ??
I am suscsess for evrything about twrp on my device A50.
About multidisabler samsung.
I try direct Reboot to system
?? violaaaaaa my A50 start SETUP PHONE.
Without installing Multidisabler. And my phone runing normal nice and greattttt
Maybe on lattes firmaware no need Flash multidisabler.
Btw thank alottttts to Redymedan , for attention reply my question until sucsess flash twrp for my A50 ?? terimakasih banyakkkk bosku
Hi
I followed instructions and youtube link.
I got twrp working. But magisk manager says 'Magisk is not installed Latest: 20.4(20400)' . Magisk Manager is up to date Installed: 7.5.1 (267) Latest: 7.5.1(267)(7)
On clicking Install it offers to download zip. I downloaded the zip, went to twrp and flashed it but still it says not installed .
Edit: I have to go into twrp and select boot->recovery , this will boot with magisk. But on reboot simply it says Magisk not installed
Edit: Go to twrp -> reboot recovery. Open Magisk manager, Install -> Recommended Way, reboot. This will make rooting permanent.
Everything working
Thank You
gSingh05 said:
Hi
I followed instructions and youtube link.
I got twrp working. But magisk manager says 'Magisk is not installed Latest: 20.4(20400)' . Magisk Manager is up to date Installed: 7.5.1 (267) Latest: 7.5.1(267)(7)
On clicking Install it offers to download zip. I downloaded the zip, went to twrp and flashed it but still it says not installed .
Edit: I have to go into twrp and select boot->recovery , this will boot with magisk. But on reboot simply it says Magisk not installed
Edit: Go to twrp -> reboot recovery. Open Magisk manager, Install -> Recommended Way, reboot. This will make rooting permanent.
Everything working
Thank You
Click to expand...
Click to collapse
That is long story I think, as I am not wrong in after android 8 or 9 above, It caused partition structure. In android 8 above partition structure has changed, we can not install magisk manually in TWRP anymore, we must patch it in recovery.img, repack recovery.img, boot.img and vbmeta.img to be flashable tar file then flash it. It looks no solution until now..
HELP
Jhon177 said:
HI REDYMAN i am sucses on twrp. but the problem now when i am installing multidisabler , twrp show failed
( errror installing zip file '/external sd/ ) red collor:crying::crying:
thanks for your attention reply
Click to expand...
Click to collapse
COULD YOU SOLVE IT? I AM ALSO GENTLE, DOES NOT INSTALL MULTIDISABLER :crying:
Mortives said:
COULD YOU SOLVE IT? I AM ALSO GENTLE, DOES NOT INSTALL MULTIDISABLER :crying:
Click to expand...
Click to collapse
Please show me the error message or screenshot of its... I did not face any issue when install multidisabler..
Mortives said:
COULD YOU SOLVE IT? I AM ALSO GENTLE, DOES NOT INSTALL MULTIDISABLER :crying:
Click to expand...
Click to collapse
For me. Done. I think if you use lattest firmware / juni security patch.
No need samsung multidisabler.
On twrp
Just format data -
Swipe to factory reset
Reboot to recovery.
Install magisk manager done. ?
That my experience.
( that also true until now I am not succes to flash multidisabler ,but everything work fine without multidisabler ,
bener bro gak bisa . Tulisannya error merah saat flash zip sd card )
BOHEMIA840 said:
@redymedan
Click to expand...
Click to collapse
Not tested, I am not sure it will work.. but you can try to test it
I am using 3.3.1.3. The process is the same? even if I already have the twrp?
i'm having problem to boot in twrp it doesn't open i tried every way above and success once or twice only and after i granted su i rebooted then i lost su again
This is my first post of this kind so bear with me, please
Info for Galaxy A8 Star:
CPU : SDM660 ( A only, 64bit )Support Project TrebleSupport System as root
※WARNING※
You will have to have OEM unlocked and this will void your warranty!!!
※also, I'm not responsible for the accident about you bricking your device※Step. 1
First of all, you will need to download two custom recoveries (TWRP, OrangeFox)
OrangeFox: https://forum.xda-developers.com/t/orange-fox-recovery-galaxy-a8-star-sm-g885f.4301055/
TWRP: https://github.com/sabpprook/android_device_samsung_astarqlte (test3 file does not work for me but you can try)
I want to finish it only using TWRP but the only TWRP that was working does NOT support flashing the system.img files
and also Orange Fox recovery has a bug that while in recovery you can't connect with the computer and push the files to the phone
so it was required to use two bootloader
Step. 2
Odin: https://odindownload.com/
I also recommend downloading the stock ROM for backup
1. after downloading the TWRP from the link (for Odin we will use the .tar file)
put your phone into download mode
Code:
adb reboot download
or just turn off the phone and press the power button, volume up, Bixby button at the same time
and use the volume button to boot into download mode
2. after the phone went to the download mode, go to Odin and at the ap section add the TWRP file then flash it
3. press the volume down, power button to turn off the device, and right after that press the power button, volume up, Bixby button at the same time
4. you will now see the TWRP recovery, press wipe, and format data
5. now we will download some files we needed
makemesar.zip: (at the attachment) or you can download it from https://drive.google.com/u/0/uc?export=download&confirm=P1-1&id=1F_f_tL4sEYFx5fa6AnwR0x1tlYhqarcT ( when you unzip it there is the zip file )Permissiver_5.zip: https://androidfilehost.com/?fid=6006931924117940902Disable_Dm-Verity_ForceEncrypt: https://drive.google.com/file/d/166texWJQhR1RgRoXiRSH_M2Q2mAyS2gC/viewCertification_Patch.zip: (at the attachment)Havoc Rom (you can use any rom you want but this is the one that I've managed to work) http://download.havoc-os.com/?dir=arm64-ab (download arm64 ab with gapps)most rooms with AB partition will be supportedMagisk: https://magiskmanager.com/ (download the apk and make it a zip file) - you could need for the phone to get the boot (makemesar will unroot it so don't worry)6. after downloading all the files that we need, we will push the files to our device using
Code:
adb push 'file dir' sdcard
※ also push TWRP .img file and the OrangeFox .img too!!
7. after pushing all the files we need to our phone, press install from the TWRP recovery and press flash from image
and select the Orange Fox .img as a recovery image, and reboot to bootloader
8. now you will boot to the Orange Fox recovery, (locate to data/media to find the files)
at the Orange Fox recovery wipe System, Dalvlk / ART Cache, Cache, Data
9. after wiping now install the os.img file and reboot to the bootloader (before reboot you will see the warning that OS is not installed), go to the menu and mount system, vendor, and install Dm Verity.zip, Permissiver_5.zip, makemesar.zip then reboot to the bootloader again, (now we will not see the OS is not installed) and now install the Certification Patch.zip
10. reboot to the system and you will see the new os setup process (sometimes you have to install the Certification Patch after setup the os )
10-1. if your device keeps going to download mode, reinstall the magisk and then reboot the phone, then it will work.
(after it boots, gently turns off the phone and install makemesar.zip first and install Dm-Verity to unroot) - some of you will be forced to use magisk but doing some wiping or reflashing the system.img sometimes makes the unrooted state work (or flash the stock system.img (extract from the stockrom) and flash the gsi ROM without wiping )
Screenshots: At Below
Currently, MTP does not work but I think this is the problem with the Havoc os, if you use another rom it could work
face unlock, fingerprint unlock works, the camera works.
if I manage to get other ROMs workingI will update the post
also at the first time I have made mine to boot without magisk but while doing again for this post I'm having trouble without magisk, if I found a way that works always I will add that to the post
[UPDATE#2]
you can download the Pixel 3 gsi rom from
(Thanks for Santa Duck providing this information!!!!)
with this files you can install the android 12 gsi rom in a usable state!!
and also ADB is working with this rom
there is still a bootlooping bug so do it with caution
[Update#1]
Today I have managed to install the Android Beta 3.1 [ is beta software and I don't recommend using it as your daily os]
https://sourceforge.net/projects/nippongsi/files/Pixel%20-%20Pixel4a_SBeta3.1%20-%20TBO42ZZ8IF/Pixel4a_SBeta3.1-AB-12-20210727-nippongsi.img.gz/download
you can download the ROM file from Nippon's Sourceforge
every step is the same and you just have to change the rom as this
there's a bug that developer setting crash the settings app and it is working but it does have some lots of bugs, and screen lock is not working but I'll try to fix it and upload the method
if your device get boot looped, press Bixby + power + vol down to boot into download mode and flash the stock AP file using Odin
[I was supposed to edit the upper one but accidentally created as a reply ]
Just go to UPDATE#2
Skuld Norniern said:
Havoc Rom (you can use any rom you want but this is the one that I've managed to work) http://download.havoc-os.com/?dir=arm64-ab (download arm64 ab with gapps)
Click to expand...
Click to collapse
Hey I thought that A8 star is an A-only device. Does flashing A/B roms cause any problems?
thongass000 said:
Hey I thought that A8 star is an A-only device. Does flashing A/B roms cause any problems?
Click to expand...
Click to collapse
thanks for the makemesar.zip we can install the A/B partition roms without any problems on the A only device and for me the A only roms won’t work on my phone
Skuld Norniern said:
thanks for the makemesar.zip we can install the A/B partition roms without any problems on the A only device and for me the A only roms won’t work on my phone
Click to expand...
Click to collapse
Hi I'm back. Do you have any issue with wired audio? I have a A9 2018 (same chipset) and audio still goes through speaker while headphones are plugged in.
If anything in Phh Treble Settings helps you, please tell me. Or if you don't need any settings for wired audio, can you send me a zip file containing any files that have the name "audio_policy" in /vendor/etc? Thanks.
thongass000 said:
Hi I'm back. Do you have any issue with wired audio? I have a A9 2018 (same chipset) and audio still goes through speaker while headphones are plugged in.
If anything in Phh Treble Settings helps you, please tell me. Or if you don't need any settings for wired audio, can you send me a zip file containing any files that have the name "audio_policy" in /vendor/etc? Thanks.
Click to expand...
Click to collapse
Sorry for being late!!
for me, I do have the same issue with wired audio and I have not been able to find a way to fix it yet
if I manage to fix the issue I will fix the main article
Skuld Norniern said:
Skuld Norniern said:
This is my first post of this kind so bear with me, please
Info for Galaxy A8 Star:
CPU : SDM660 ( A only, 64bit )Support Project TrebleSupport System as root
※WARNING※
You will have to have OEM unlocked and this will void your warranty!!!
※also, I'm not responsible for the accident about you bricking your device※Step. 1
First of all, you will need to download two custom recoveries (TWRP, OrangeFox)
OrangeFox: https://forum.xda-developers.com/t/orange-fox-recovery-galaxy-a8-star-sm-g885f.4301055/
TWRP: https://github.com/sabpprook/android_device_samsung_astarqlte (test3 file does not work for me but you can try)
I want to finish it only using TWRP but the only TWRP that was working does NOT support flashing the system.img files
and also Orange Fox recovery has a bug that while in recovery you can't connect with the computer and push the files to the phone
so it was required to use two bootloader
Step. 2
Odin: https://odindownload.com/
I also recommend downloading the stock ROM for backup
1. after downloading the TWRP from the link (for Odin we will use the .tar file)
put your phone into download mode
Code:
adb reboot download
or just turn off the phone and press the power button, volume up, Bixby button at the same time
and use the volume button to boot into download mode
2. after the phone went to the download mode, go to Odin and at the ap section add the TWRP file then flash it
3. press the volume down, power button to turn off the device, and right after that press the power button, volume up, Bixby button at the same time
4. you will now see the TWRP recovery, press wipe, and format data
5. now we will download some files we needed
makemesar.zip: (at the attachment) or you can download it from https://drive.google.com/u/0/uc?export=download&confirm=P1-1&id=1F_f_tL4sEYFx5fa6AnwR0x1tlYhqarcT ( when you unzip it there is the zip file )Permissiver_5.zip: https://androidfilehost.com/?fid=6006931924117940902Disable_Dm-Verity_ForceEncrypt: https://drive.google.com/file/d/166texWJQhR1RgRoXiRSH_M2Q2mAyS2gC/viewCertification_Patch.zip: (at the attachment)Havoc Rom (you can use any rom you want but this is the one that I've managed to work) http://download.havoc-os.com/?dir=arm64-ab (download arm64 ab with gapps)most rooms with AB partition will be supportedMagisk: https://magiskmanager.com/ (download the apk and make it a zip file) - you could need for the phone to get the boot (makemesar will unroot it so don't worry)6. after downloading all the files that we need, we will push the files to our device using
Code:
adb push 'file dir' sdcard
※ also push TWRP .img file and the OrangeFox .img too!!
7. after pushing all the files we need to our phone, press install from the TWRP recovery and press flash from image
and select the Orange Fox .img as a recovery image, and reboot to bootloader
8. now you will boot to the Orange Fox recovery, (locate to data/media to find the files)
at the Orange Fox recovery wipe System, Dalvlk / ART Cache, Cache, Data
9. after wiping now install the os.img file and reboot to the bootloader (before reboot you will see the warning that OS is not installed), go to the menu and mount system, vendor, and install Dm Verity.zip, Permissiver_5.zip, makemesar.zip then reboot to the bootloader again, (now we will not see the OS is not installed) and now install the Certification Patch.zip
10. reboot to the system and you will see the new os setup process (sometimes you have to install the Certification Patch after setup the os )
10-1. if your device keeps going to download mode, reinstall the magisk and then reboot the phone, then it will work.
(after it boots, gently turns off the phone and install makemesar.zip first and install Dm-Verity to unroot) - some of you will be forced to use magisk but doing some wiping or reflashing the system.img sometimes makes the unrooted state work (or flash the stock system.img (extract from the stockrom) and flash the gsi ROM without wiping )
Screenshots: At Below
Currently, MTP does not work but I think this is the problem with the Havoc os, if you use another rom it could work
face unlock, fingerprint unlock works, the camera works.
if I manage to get other ROMs workingI will update the post
also at the first time I have made mine to boot without magisk but while doing again for this post I'm having trouble without magisk, if I found a way that works always I will add that to the post
[UPDATE#2]
you can download the Pixel 3 gsi rom from
(Thanks for Santa Duck providing this information!!!!)
with this files you can install the android 12 gsi rom in a usable state!!
and also ADB is working with this rom
there is still a bootlooping bug so do it with caution
Click to expand...
Click to collapse
Hello sir i can't find havoc os 4.5 in:https://download.havoc-os.com/?dir=arm64-ab
Click to expand...
Click to collapse
After flashing twrp on my sm g885f, cant get into terp,
mine shows volume down + power to restart, not to enter turn off
how can i enter into twrp
Skuld Norniern said:
9. after wiping now install the os.img file and reboot to the bootloader (before reboot you will see the warning that OS is not installed), go to the menu and mount system, vendor, and install Dm Verity.zip, Permissiver_5.zip, makemesar.zip then reboot to the bootloader again, (now we will not see the OS is not installed) and now install the Certification Patch.zip
Click to expand...
Click to collapse
'os.img file' where
, guess i fixed it
when installing Certification_Patch.zip, it shows command error
what i found- this patch is for G885FDXS5CUL1, mine is
G885FDXU5CUG1