Hey guys
I was rooting Galaxy Grand Prime SM-G531H with CF-AutoRoot while forgetting to enable USB Debugging, and to unlock FRP (ik thats stupid)
im just assuming that FRP= Factory Reset Protection.. maybe? anyway doesnt matter much ...
while rooting, FRP blocked the custom recovery > bricked
FRP blocks everything from odin
To fix with Kies, it wants to erase all data while *I cant lose them*
so i would appreciate if someone can upload the original boot.img and recovery.img of SM-G531H
I can't find them anywhere on the internet unlike other devices like S series
Info: tried installing a pre rooted official firmware but FRP blocked it, and can't downlaod the original non-rooted firmware becasue of very bad download sites (disconnect all the time, slow, not resumable downloads)
.
U can extract it from your stock rom that u used to flash with odin.
Here you go!
Here are my latest stock firmware files, you can download boot and recovery. Hope I helped you if you haven't solved the problem already! :good:
https://my.pcloud.com/publink/show?code=kZuzgPZx8konqA1xSjLBaDBEFeshHIss7pV
d1v1n3 said:
Here are my latest stock firmware files, you can download boot and recovery. Hope I helped you if you haven't solved the problem already! :good:
https://my.pcloud.com/publink/show?code=kZuzgPZx8konqA1xSjLBaDBEFeshHIss7pV
Click to expand...
Click to collapse
Thanks mate they do help :like:
is this okay to use it if mine sm-g530h/ds ?
GaviPras said:
is this okay to use it if mine sm-g530h/ds ?
Click to expand...
Click to collapse
no it cant be used for u'rs but if u need i can provide
.
d1v1n3 said:
no it cant be used for u'rs but if u need i can provide
Click to expand...
Click to collapse
How can I use boot.img and recovery.img . where does it go in odin?
registre said:
How can I use boot.img and recovery.img . where does it go in odin?
Click to expand...
Click to collapse
1. First u need to install 7zip on u'r PC
2. select boot.img and recovery.img then right click on them and choose add to archive
3. choose tar in the format instead of zip and click ok
4. now u have a .tar file that contains boot and recovery so place that file in the AP inside odin
5. flash the phone and that's it, u r good to go
registre said:
How can I use boot.img and recovery.img . where does it go in odin?
Click to expand...
Click to collapse
Sadly, i already went to Samsung Service centre. They said to me to replace the emmc because it can't be flashed anymore
my assume usb debugging not checked and also FRP
now it only used as a key chain :crying:
I see the frp problem in my gran prime
I flash the original rom with odin
And problem is solved
Flash official firmware it will fix ur problem
Please I need help it says the link is empty or deleted.
Send me the right link please....
link die
d1v1n3 said:
Here are my latest stock firmware files, you can download boot and recovery. Hope I helped you if you haven't solved the problem already! :good:
Click to expand...
Click to collapse
please help me! I have the same issue. Please re-up it. thank you so much
Related
Hi:
I need to flash using flashtool this "LEAN KERNEL" http://*******/PBKLQ... But the file is in ZIP form... I know how to flash FTF and IMG, but ZIP...
I shall appreciate any help...
pROAddicts said:
Hi:
I need to flash using flashtool this "LEAN KERNEL" http://*******/PBKLQ... But the file is in ZIP form... I know how to flash FTF and IMG, but ZIP...
I shall appreciate any help...
Click to expand...
Click to collapse
Just open the zip and you will find a "boot.img" file. Save it and flash it
pROAddicts said:
Hi:
I need to flash using flashtool this "LEAN KERNEL" http://*******/PBKLQ... But the file is in ZIP form... I know how to flash FTF and IMG, but ZIP...
I shall appreciate any help...
Click to expand...
Click to collapse
just open the zip & you'll find "boot.img"
extract that kernel & flash it!!
Happy Flashing!
Don't forget to hit the THANKS button!!
Thanks for the reply... Maybe some other time.. I already flash CM9 for the ParanoidAndroid... I love the ROM...
Thanks guys...
how flash lean kernel in to my mobile xperia neo l with flash tool
please help me out
i feel thankful for helping me
vinay009 said:
how flash lean kernel in to my mobile xperia neo l with flash tool
please help me out
i feel thankful for helping me
Click to expand...
Click to collapse
Steps to Flash Any Kernel:
connect ur device to pc/laptop
open flashtool and click flash icon at the top and select fastboot
click reboot device via adb
wait fr a moment and click flash kernel option.. here u need to select the .img file of the kernel u want to flash..
Thats it.. simple
Hit "Thanks" if i helped you
Sent from my MT11i using xda app-developers app
Still cannot found the kernel in zip file.
http://forum.xda-developers.com/showthread.php?t=2278875
Every time try to install, face Status 7.
Try to flash with other kernel but no luck.
Singhathep said:
Still cannot found the kernel in zip file.
http://forum.xda-developers.com/showthread.php?t=2278875
Every time try to install, face Status 7.
Try to flash with other kernel but no luck.
Click to expand...
Click to collapse
Download the latest version of the rom again and unzip it. Then you should have the boot.img. If not download any other kernel for jelly bean for your device and flash it
Afterwards flash the rom again
Sent from my Nexus 4 running Android 4.2.2
karanrajkapur said:
just open the zip & you'll find "boot.img"
extract that kernel & flash it!!
Happy Flashing!
Don't forget to hit the THANKS button!!
Click to expand...
Click to collapse
I extracted the zip file & pasted that whole file(META-INF,system & haida.img) into the firmware folder of Flashtool.
No Result............... PLs Helpp!
VjazzzP said:
I extracted the zip file & pasted that whole file(META-INF,system & haida.img) into the firmware folder of Flashtool.
No Result............... PLs Helpp!
Click to expand...
Click to collapse
extremely sorry for the late reply... just pick up the "haida.img". do not drag and drop it, just navigate to it through the dialogue boxes after selecting fastboot mode> select kernel to flash> go to the respective directory> done!
TA-DA!
mi just asking one Q ( because i dont wanna create any new thread )
Why we cant flash kernel via CWM just like Samsung / lg / nexus
Thnks..
sagar.andro said:
mi just asking one Q ( because i dont wanna create any new thread )
Why we cant flash kernel via CWM just like Samsung / lg / nexus
Thnks..
Click to expand...
Click to collapse
This was discussed many times and it doesn't work because we have no separate recovery partition on our phones, kernel and recovery is one partition so it's impossible
Sent from my Nexus 4 running Android 4.3
haku12345 said:
.....
Click to expand...
Click to collapse
trolling..
please help
karanrajkapur said:
just open the zip & you'll find "boot.img"
extract that kernel & flash it!!
Happy Flashing!
Don't forget to hit the THANKS button!!
Click to expand...
Click to collapse
heyy ... every time i download a image file it says a corrupted disc image .. what is wrong ??
any help would be appreciated..
Vikas Jeesukh said:
heyy ... every time i download a image file it says a corrupted disc image .. what is wrong ??
any help would be appreciated..
Click to expand...
Click to collapse
You don't have to open it dude!! Run it with the Flashtool.
FlashTool not recognizing boot.img
karanrajkapur said:
extremely sorry for the late reply... just pick up the "haida.img". do not drag and drop it, just navigate to it through the dialogue boxes after selecting fastboot mode> select kernel to flash> go to the respective directory> done!
TA-DA!
Click to expand...
Click to collapse
Hi,
I m trying to flash Cynogen Mod 12 on my Xperia L phone, using FlashTool.
However, unlike .ftf file, FlashTool is not recognising the zip. I even tried to extract the zip in a folder containing boot.img, still the FlashTool is not recognizing anything there.
Please help.
ashishsaran said:
Hi,
I m trying to flash Cynogen Mod 12 on my Xperia L phone, using FlashTool.
However, unlike .ftf file, FlashTool is not recognising the zip. I even tried to extract the zip in a folder containing boot.img, still the FlashTool is not recognizing anything there.
Please help.
Click to expand...
Click to collapse
I'd suggest you flash it from the recovery. It's a more successful and preferred option.
karanrajkapur said:
I'd suggest you flash it from the recovery. It's a more successful and preferred option.
Click to expand...
Click to collapse
Yes, did that..
worked,
Thanks
hello guys i just bricked my phone and it can't go to recovery but it reads in the sp flash tool and i got a zip file for my stock rom is it possible to flash this zip file in sp flash tool??
xmak17(AlcatelPopC7) said:
hello guys i just bricked my phone and it can't go to recovery but it reads in the sp flash tool and i got a zip file for my stock rom is it possible to flash this zip file in sp flash tool??
Click to expand...
Click to collapse
sp flashtool?
for mtk devices?
Hey
Yesterday I flashed a boot logo on my SM-G928F in TWRP. After that my phone doesn't boot into system or recovery anymore - there's always a blackscreen. I only can boot into download mode.
I tried to flash a stock-rom via Odin but that didn't helped - the same blackscreen, because a stock rom does not replace the boot logo.
I think I have to flash the stock boot logo ( https://drive.google.com/file/d/1378RQ5w_vAAmnQ3HB0FymZXWIm12T0Mg/view ) , but thats a zip which I can't flash via Odin.
There a two ways in my mind which could work:
1. Getting a tar.md5 file with the stock boot logo.
2. Getting a tool which allows to flash zips in download mode of the phone.
I really hope that someone could help me with my big problem.
Best regards
DGB
Hey there
I recommend to flash the firmware again but this time after flashing firmware flash the twrp and flash the zip via adb sideload ( a feature present in TWRP) as by adb sideload one is able to flash zip files as well
Or i recommend you to get to know the combination of keys that will help you to directly enter into recovery
Hope it will work
And if there is any problem let me know
As in the internet there are various ways by which a person can flash the custom rom and custom recovery via odin
Look at this link:-
http://www.lineageosrom.com/2017/07/how-to-flash-custom-rom-via-odin.html?m=1
nr10prashant said:
Hey there
I recommend to flash the firmware again but this time after flashing firmware flash the twrp and flash the zip via adb sideload ( a feature present in TWRP) as by adb sideload one is able to flash zip files as well
Or i recommend you to get to know the combination of keys that will help you to directly enter into recovery
Hope it will work
And if there is any problem let me know
As in the internet there are various ways by which a person can flash the custom rom and custom recovery via odin
Look at this link:-
http://www.lineageosrom.com/2017/07/how-to-flash-custom-rom-via-odin.html?m=1
Click to expand...
Click to collapse
Thank you for your answer but that didn't worked. The problem is that flashing the stock firmware doesn't replace or repair the boot image. So I've got a never ending blackscreen when I want to boot in system or TWRP/Recovery and that means that I'm not able to configure ADB Sideload.
I can only boot into download mode, nothing else.
I think the jpg of the boot logo I've installed was corrupted so it can't be loaded
You are in download mode so you have to press all the keys including the home button and once the download mode closes then press the "volume up key and power key and also the home button and then your phone will automatically reboot into recovery.
I know, I tried that multiple times but it doesn't work. Blackscreen... only a never ending blackscreen. The download mode is the only thing taht works. I have to flahs the old boot logo via download mode... but i don't know how
Wait for the battery to be drained out completely and then do what i said earlier
nr10prashant said:
Wait for the battery to be drained out completely and then do what i said earlier
Click to expand...
Click to collapse
I did. but it didn't work, too
I really need someone who is able to integrate the stock boot logo into a custom rom which can be flashed via Odin... Or I need a tool which allows to install zips in download mode. I tried adb sideload again but it didn't recognizes my phone when its not in recovery.
I really think that my S6 edge + is nearly died :crying:
Try to flash the firmware with the samsung smart swith.....
This will 100% works!!!!!4
Inderpreets said:
Try to flash the firmware with the samsung smart swith.....
This will 100% works!!!!!4
Click to expand...
Click to collapse
I know but Samsung removed this feature some months ago so I'm not able to do this
--- I know, it's from the German Samsung Support but it's a confirmation that Samsung removed this feature:
DGB100 said:
I know but Samsung removed this feature some months ago so I'm not able to do this
--- I know, it's from the German Samsung Support but it's a confirmation that Samsung removed this feature:
Click to expand...
Click to collapse
Not even flashing a factory firmware (4 files with pit) with repartition option selected?
What about a combination firmware and then a full stock FW?
яι¢αя∂σ said:
Not even flashing a factory firmware (4 files with pit) with repartition option selected?
What about a combination firmware and then a full stock FW?
Click to expand...
Click to collapse
I only tried to flash stock firmware with AP in Odin... and I tried stock rom with re-partition.
Where do I get those 4 files? I need XEU for my SM-G928F. It would be very nice if you could give me a more detailed instruction for this because I never worked with PIT...
get samfirm v0.3.6
On the model you put sm-g928f, region XEU, tick the binary nature box and press "check update". Download the resulting file, that is a factory firmware to do repairs in a 4 files format: bootloader, pda or ap, modem or cp and csc!
You will get this file:
SM-G928F_1_20180305151001_nsg8uwd0sh_fac.zip
Put each file in the correct field in odin!
About combination firmware, it needs to be same binary version as stock firmware already programed on phone! if first number on firmware version is a 3, combination FW need to be also bin 3!
G928FXXS4CRB4 if is 4, you need comb fw also in bin 4! if you downgrade you get odin error and a softbrick!
Was checking if any comb. fw is available, but i find only paid files for your phone model!
яι¢αя∂σ said:
get samfirm v0.3.6
On the model you put sm-g928f, region XEU, tick the binary nature box and press "check update". Download the resulting file, that is a factory firmware to do repairs in a 4 files format: bootloader, pda or ap, modem or cp and csc!
You will get this file:
SM-G928F_1_20180305151001_nsg8uwd0sh_fac.zip
Put each file in the correct field in odin!
About combination firmware, it needs to be same binary version as stock firmware already programed on phone! if first number on firmware version is a 3, combination FW need to be also bin 3!
G928FXXS4CRB4 if is 4, you need comb fw also in bin 4! if you downgrade you get odin error and a softbrick!
Was checking if any comb. fw is available, but i find only paid files for your phone model!
Click to expand...
Click to collapse
Thanks it worked for me but now I need a pit-file. Do you now where I get it?
EDIT: I found a pit-file for myself. Thank you very much for your help!
HTML:
https://drive.google.com/file/d/0BzyeAt2hy6XednpHZmhRUmtOMFk/view
DGB100 said:
Thanks it worked for me but now I need a pit-file. Do you now where I get it?
EDIT: I found a pit-file for myself. Thank you very much for your help!
HTML:
https://drive.google.com/file/d/0BzyeAt2hy6XednpHZmhRUmtOMFk/view
Click to expand...
Click to collapse
It worked means you got your phone back to normal or you could get the firmware using samfirm?
Pit file is always inside csc file on a 4 files fac firmware. Use the pit on firmware because the pit from your link can be from a early version of android and have different bits for partition sizes!
EDIT: Here, got the combination fw for the binary 4. IF your phone is already ok, don't use this!
DGB100 said:
I know but Samsung removed this feature some months ago so I'm not able to do this
--- I know, it's from the German Samsung Support but it's a confirmation that Samsung removed this feature:
Click to expand...
Click to collapse
SmartSwitch still works for my G925v.
яι¢αя∂σ said:
It worked means you got your phone back to normal or you could get the firmware using samfirm?
Pit file is always inside csc file on a 4 files fac firmware. Use the pit on firmware because the pit from your link can be from a early version of android and have different bits for partition sizes!
EDIT: Here, got the combination fw for the binary 4. IF your phone is already ok, don't use this!
Click to expand...
Click to collapse
I got my phone back to normal so thank you very much!
I have the same problem on my j2 prime I can only goto download mode and in odin tried to install stock firmware but got write fail..can you please help me with this error
Hi there,
I used various ROMs and wanted to show appreciation to all developers for their work. Unfortunately, i use several apps that do not work well with unrooted Poco F1. What are the steps to unroot and go back to stock version of phone? I've tried the guide that uses Mi Flash tool but I cannot make it work. Is there a guide to unistall twrp, lock bootloader and how to flash stock stable rom in order to get OTA updates and phone as when it comes out of the box?
Many thanks to who will help me.
Manuel
no one?
I don't know about locking the bootloade, but for unrooting maybe just flash stock global rom without disabling forced encryption
Dedalus73 said:
Hi there,
I used various ROMs and wanted to show appreciation to all developers for their work. Unfortunately, i use several apps that do not work well with unrooted Poco F1. What are the steps to unroot and go back to stock version of phone? I've tried the guide that uses Mi Flash tool but I cannot make it work. Is there a guide to unistall twrp, lock bootloader and how to flash stock stable rom in order to get OTA updates and phone as when it comes out of the box?
Many thanks to who will help me.
Manuel
Click to expand...
Click to collapse
what was the problem with mi flash tool, it would be helpful to know. you did try flashing a fastboot image ?
As for unrooting if u clean flash any custom rom without flashing magisk ( basically if u don't root) all ur bank application would work.
anshu945 said:
what was the problem with mi flash tool, it would be helpful to know. you did try flashing a fastboot image ?
As for unrooting if u clean flash any custom rom without flashing magisk ( basically if u don't root) all ur bank application would work.
Click to expand...
Click to collapse
Mi flash tool always says error "couldn't find file flash_all_expect_system.bat"
Dedalus73 said:
Mi flash tool always says error "couldn't find file flash_all_expect_system.bat"
Click to expand...
Click to collapse
hi, u are trying to flash ota or recovery file using mi flash tool.
what u need is fastboot rom.
here --- https://en.miui.com/thread-3757763-1-1.html
if u need a guide with images to follow here u go -- http://en.miui.com/a-234.html
keep in mind u need to download the fastboot rom file not the recovery rom.
then extract the file and flash it.
and if u want to lock the bootloader too, then use " clean all and lock " option
it will restore ur phone to 100% stock and relock ur bootloader.
NEVER use the option 'flash factory' by mistake.
i hope i was clear enough if any doubt ask or search xda before proceeding.
if u need a guide with images to follow here u go --http://en.miui.com/a-234.html
anshu945 said:
hi, u are trying to flash ota or recovery file using mi flash tool.
what u need is fastboot rom.
here --- https://en.miui.com/thread-3757763-1-1.html
if u need a guide with images to follow here u go -- http://en.miui.com/a-234.html
keep in mind u need to download the fastboot rom file not the recovery rom.
then extract the file and flash it.
and if u want to lock the bootloader too, then use " clean all and lock " option
it will restore ur phone to 100% stock and relock ur bootloader.
NEVER use the option 'flash factory' by mistake.
i hope i was clear enough if any doubt ask or search xda before proceeding.
if u need a guide with images to follow here u go --http://en.miui.com/a-234.html
Click to expand...
Click to collapse
Sorry man, I've followed step by step as I did before and the Xiaomi flash doesn't work, same error as before.
Dedalus73 said:
Sorry man, I've followed step by step as I did before and the Xiaomi flash doesn't work, same error as before.
Click to expand...
Click to collapse
can u upload the image of the main folder u extracted or just list the contents.
how can .bat file be missing.
anshu945 said:
can u upload the image of the main folder u extracted or just list the contents.
how can .bat file be missing.
Click to expand...
Click to collapse
will do in 3 mins. downloading again the tgz file
Dedalus73 said:
will do in 3 mins. downloading again the tgz file
Click to expand...
Click to collapse
OK,
u might have to decompress it 2 times though i think, first u will get a zip file from the .tgz file then exrtract again.
anshu945 said:
OK,
u might have to decompress it 2 times though i think, first u will get a zip file from the .tgz file then exrtract again.
Click to expand...
Click to collapse
see screenshot
Dedalus73 said:
see screenshot
Click to expand...
Click to collapse
i don't see any problem here man. if u previously flashed from this folder it should always work.
u can try this tool https://forum.xda-developers.com/poco-f1/development/tool-tool-one-driverstwrpfactory-t3866189
i didn't use this tool for poco but used this guys tool for my A1 i think.
anshu945 said:
i don't see any problem here man. if u previously flashed from this folder it should always work.
u can try this tool https://forum.xda-developers.com/poco-f1/development/tool-tool-one-driverstwrpfactory-t3866189
i didn't use this tool for poco but used this guys tool for my A1 i think.
Click to expand...
Click to collapse
Ok...now it worked. Only difference is where I saved the extracted files, it worked by saving them on the desktop, it wouldn't work when I saved them under documents/PocoF1/Roms/
very very weird. Thanks for your patience and help. I'm usually good at following directions
Dedalus73 said:
Ok...now it worked. Only difference is where I saved the extracted files, it worked by saving them on the desktop, it wouldn't work when I saved them under documents/PocoF1/Roms/
very very weird. Thanks for your patience and help. I'm usually good at following directions
Click to expand...
Click to collapse
no worries man, win 10 does mess with us from time to time
Dedalus73 said:
see screenshot
Click to expand...
Click to collapse
pls give me that flash_all.bat
I have full guide here. https://forum.xda-developers.com/poco-f1/how-to/unbrick-flashing-stable-rom-pocophone-t3901152
"The current image(boot/recovery) have been destroyed and can not boot.
Please flash the corret image"
Hey guys can someone help me ?
my device can't booting, because I patched my boot.img because I need to root it, and I don't have stock boot.img
Already downloaded from stock rom 4 times and corrupt
but I still can use the bootloader / fastboot
Maybe someone can help me with the boot.img ? I mean send/upload it
NB : I'm in .14 Rom
My device already unlocked/UBL
please someone help me with booting.img recovery.img
6 times downloaded firmware but I still got corrupted file
puttr said:
please someone help me with booting.img recovery.img
6 times downloaded firmware but I still got corrupted file
Click to expand...
Click to collapse
Bro, join telegram channel. you will get better support.
Telegram channel's full of impatient youth who are irreverent, arrogant and talk in pidgin English....If you fit the bill, you'll fit right in....
puttr said:
"The current image(boot/recovery) have been destroyed and can not boot.
Please flash the corret image"
Hey guys can someone help me ?
my device can't booting, because I patched my boot.img because I need to root it, and I don't have stock boot.img
Already downloaded from stock rom 4 times and corrupt
but I still can use the bootloader / fastboot
Maybe someone can help me with the boot.img ? I mean send/upload it
NB : I'm in .14 Rom
My device already unlocked/UBL
Click to expand...
Click to collapse
don't panic, it's pretty easy.
all you have to do is just install boot.img in the stock room. and the problem is fixed
Boot loop
AndriezSetyawan said:
don't panic, it's pretty easy.
all you have to do is just install boot.img in the stock room. and the problem is fixed
Click to expand...
Click to collapse
Im stuck at boot loop pls help
aslo give me the telegram link
Cookie Ninja said:
Telegram channel's full of impatient youth who are irreverent, arrogant and talk in pidgin English....If you fit the bill, you'll fit right in....
Click to expand...
Click to collapse
excuse me, wtf?
---------- Post added at 06:12 AM ---------- Previous post was at 06:11 AM ----------
malakaz27 said:
Im stuck at boot loop pls help
aslo give me the telegram link
Click to expand...
Click to collapse
may I know what you were doing before bootloop?
also feel free to join https://t.me/realme3pros
malakaz27 said:
Im stuck at boot loop pls help
aslo give me the telegram link
Click to expand...
Click to collapse
join this group https://t.me/r3pindonesia
your problem has fixed
same problem with me pls hlp
i got the same problem please heeeeeeeeeeeeeeelp i hope to fing solution quickly
I have the same problem.i am going to flash all image files throuh fastboot.i will confirm here if it works
well, but i dont know how to flash
venky34268 said:
I have the same problem.i am going to flash all image files throuh fastboot.i will confirm here if it works
Click to expand...
Click to collapse
i searched a lot and i ddnt find except one flash file .ofp and i dont know how to flash it ... pls tell me how to flash
Follow the guide only fastboot method.
nasser.56 said:
i searched a lot and i ddnt find except one flash file .ofp and i dont know how to flash it ... pls tell me how to flash
Click to expand...
Click to collapse
https://forum.xda-developers.com/realme-3-pro/how-to/guide-to-stock-rom-stock-recovery-t3940604
the files are there with the link
my phone is done
my phone is done :fingers-crossed:
i toke it to realme warranty and they flashed it
for free
they thought i flashed it with wrong way hahaha
Help me bro
harikp6247 said:
Bro, join telegram channel. you will get better support.
Click to expand...
Click to collapse
I aslo brick my phone
boot/recovery destroyed
give me link boot.img please bro
but how?
AndriezSetyawan said:
don't panic, it's pretty easy.
all you have to do is just install boot.img in the stock room. and the problem is fixed
Click to expand...
Click to collapse
#can you give tutorial, pls help me.
venky34268 said:
I have the same problem.i am going to flash all image files throuh fastboot.i will confirm here if it works
Click to expand...
Click to collapse
if you have the img files please share the link
Mod Edit: Every member is responsible for what they do with their device. Please be sure you know what you are doing, and that the method you want to use is correct for your device.
Guys finally I found the way to recover the device.
It should work on any real me device currently I am using real me 3 pro with color OS 6.0.1.
This is the solution for recovery/ boot destroyed message.
Here are the steps :
You are probably facing this issue because you have unlocked your bootloader.
First of all you have to lock bootloader of real me 3 pro using fastboot
Reboot your phone to bootloader mode
And connect to computer with USB.
here are the commands to lock the bootloader
fastboot oem lock
fastboot flashing lock -- this one I used
fastboot oem relock
( No need to use all you can try anyone of them )
Once you type this command in computer and hit enter it will ask to confirm the lock on phone
Use volume down keys for confirmation.
So here is the trick,
Color OS recovery is made to wipe the data whenever you lock / unlock bootloader.
So once you lock your bootloader on you real me 3 your color OS recovery will pop up ( even it is broke) for some seconds which will format your internal data.
Once you format the data your phone again will boot to recovery mode and same error will popup
" Boot / recovery has been destroyed "
Don't worry
Again power off the device wait for 10 seconds and reboot to bootloader mode not to recovery (very Imp) by pressing volume down + power key
Now you will boot in color OS recovery
( Note : if you didn't succeed try the above step 3-4 time because it took 3 attempt for me )
Surely you will boot in color OS recovery.
Now download the color OS OTA update file to your Memory card
( It is necessary to use SD card )
link :
https://www.realme.com/in/support/software-update
Download the latest firmware ozip file
Now create the folder in memory card and paste the firmware file over there
If you are already in color OS recovery don't reboot the phone just insert the SD card and select update. Select storage as
SD card
Select the folder and file and update.
It will take few minutes and you will be able to successfully boot in stock color OS ROM.
Enjoy.
You know the best part that I am writing this blog from the same phone only.
when i select the ozip file for update the processing stuck on 30%. thn faild
when i select the ozip file for update the processing stuck on 30%. thn failed
SharonBlack said:
when i select the ozip file for update the processing stuck on 30%. thn failed
Click to expand...
Click to collapse
Looks like the ozip file is not downloaded properly
Download the diffrent version and check
You can also try to flash the flashable zip from xda without bloat...
different ozip installation also failed
hacker786 said:
Looks like the ozip file is not downloaded properly
Download the diffrent version and check
You can also try to flash the flashable zip from xda without bloat...
Click to expand...
Click to collapse
flashable zip support stock recovery?? different ozip installation also failed .so plz help me
---------- Post added at 05:34 AM ---------- Previous post was at 05:01 AM ----------
hacker786 said:
Looks like the ozip file is not downloaded properly
Download the diffrent version and check
You can also try to flash the flashable zip from xda without bloat...
Click to expand...
Click to collapse
i also tried a14,a8 ozip stock rom.but after starting installation 2 minutes then failed
Hello XDA community,
I Used To Flash My Phone vivo y15s and I did but after Flash it stuck on logo and then again I did Flashing but this time I choose Format All + Download in So Flash tool and then Set Completely dead. When I press Power button no response but pc still detects.
How Can I Boot My Set Again?
Thank You and Sorry For My English.
That's weird. With SP Flash Tool you should be able to re-flash phone's Stock ROM.
jwoegerbauer said:
That's weird. With SP Flash Tool you should be able to re-flash phone's Stock ROM.
Click to expand...
Click to collapse
Yes, I Did Again but Still nothing happen.
Take it to repair service.
It is because of the firmware and unavailability od userdata.
If want I can give a firmware zip
Suji2k said:
It is because of the firmware and unavailability od userdata.
If want I can give a firmware zip
Click to expand...
Click to collapse
i've exactly the same issue bro with vivo y1s can you advice or help? Would be highly appreciated!!