How To Boot Dead Vivo Y15s After Flash? - Android Q&A, Help & Troubleshooting

Hello XDA community,
I Used To Flash My Phone vivo y15s and I did but after Flash it stuck on logo and then again I did Flashing but this time I choose Format All + Download in So Flash tool and then Set Completely dead. When I press Power button no response but pc still detects.
How Can I Boot My Set Again?
Thank You and Sorry For My English.

That's weird. With SP Flash Tool you should be able to re-flash phone's Stock ROM.

jwoegerbauer said:
That's weird. With SP Flash Tool you should be able to re-flash phone's Stock ROM.
Click to expand...
Click to collapse
Yes, I Did Again but Still nothing happen.

Take it to repair service.

It is because of the firmware and unavailability od userdata.
If want I can give a firmware zip

Suji2k said:
It is because of the firmware and unavailability od userdata.
If want I can give a firmware zip
Click to expand...
Click to collapse
i've exactly the same issue bro with vivo y1s can you advice or help? Would be highly appreciated!!

Related

Update From B130 To Marshmallow and bricked my phone

hi guys
im update my honor 7 (PLK-L01) from B130 to B330 via TWRP Recovery And now my phone just restarting and anything dosent work please help me
what can i do now !?
and i dont have nandroid backup from my phone
nima-n96 said:
hi guys
im update my honor 7 (PLK-L01) from B130 to B330 via TWRP Recovery And now my phone just restarting and anything dosent work please help me
what can i do now !?
and i dont have nandroid backup from my phone
Click to expand...
Click to collapse
download stock rom and flash it through adb : P
Michaelrev said:
download stock rom and flash it through adb : P
Click to expand...
Click to collapse
I tried this but dont start and just boot on recovery
nima-n96 said:
I tried this but dont start and just boot on recovery
Click to expand...
Click to collapse
you need to open it in huawei updateextractor and flash it one by one. boot, cache, cust, recovery, and system.
Michaelrev said:
you need to open it in huawei updateextractor and flash it one by one. boot, cache, cust, recovery, and system.
Click to expand...
Click to collapse
Once time flash B130 Frimware file (System.img , cust.img ,recovery , boot.img) but my phone just restarting
in second time i try with B330 frimware files (System.img , cust.img ,recovery , boot.img) and my phone just going on e recovery and doesn't start just hanging on boot splash logo and don't startup
i try to install with update .app and i put update file on dload folder and restart my phone with (vol up + vol down +power ) and hanging on on 5%
I try all way but doesn't start this phone
i think just turn up with nandroid backup from stock b130
Hi did you fixed it somehow ? I am facing the same issue, but with firmware B187 (single sim), bad for me that you cannot find this FW, it is custom FW for my Slovakian operator. Now it is ruined and I cannot use the phone because it is restarting all the time. Flashing B100 or B370 did not help at all, in that case phone will not boot at all and keeps restarting over and over. I contacted directly Huawei and my operator, somehow I need original B187 FW to fix it, if not phone will go to claim as I am business customer.
Ing.King said:
Hi did you fixed it somehow ? I am facing the same issue, but with firmware B187 (single sim), bad for me that you cannot find this FW, it is custom FW for my Slovakian operator. Now it is ruined and I cannot use the phone because it is restarting all the time. Flashing B100 or B370 did not help at all, in that case phone will not boot at all and keeps restarting over and over. I contacted directly Huawei and my operator, somehow I need original B187 FW to fix it, if not phone will go to claim as I am business customer.
Click to expand...
Click to collapse
You can use Multi-Tool to debrand it, and flash whichever firmware you wish.
I claimed Honor and got new unit with dualsim I don' t need anything to fix anymore. So no such thing like warranty break with bootloader unlocked. Repair center in protocol stated just, warranty OK unit switch.
Awesome, they gave you a new device.
frankly speaking, I didn't expect new phone after 2 weeks...
Ing.King said:
frankly speaking, I didn't expect new phone after 2 weeks...
Click to expand...
Click to collapse
No I have experience, Huawei provides good service if your problem is legit.

[Q][SM-G531H] Unlocking FRP while bricked (Only download mode accessible!)

Hey guys
I was rooting Galaxy Grand Prime SM-G531H with CF-AutoRoot while forgetting to enable USB Debugging, and to unlock FRP (ik thats stupid)
im just assuming that FRP= Factory Reset Protection.. maybe? anyway doesnt matter much ...
while rooting, FRP blocked the custom recovery > bricked
FRP blocks everything from odin
To fix with Kies, it wants to erase all data while *I cant lose them*
so i would appreciate if someone can upload the original boot.img and recovery.img of SM-G531H
I can't find them anywhere on the internet unlike other devices like S series
Info: tried installing a pre rooted official firmware but FRP blocked it, and can't downlaod the original non-rooted firmware becasue of very bad download sites (disconnect all the time, slow, not resumable downloads)
.
U can extract it from your stock rom that u used to flash with odin.
Here you go!
Here are my latest stock firmware files, you can download boot and recovery. Hope I helped you if you haven't solved the problem already! :good:
https://my.pcloud.com/publink/show?code=kZuzgPZx8konqA1xSjLBaDBEFeshHIss7pV
d1v1n3 said:
Here are my latest stock firmware files, you can download boot and recovery. Hope I helped you if you haven't solved the problem already! :good:
https://my.pcloud.com/publink/show?code=kZuzgPZx8konqA1xSjLBaDBEFeshHIss7pV
Click to expand...
Click to collapse
Thanks mate they do help :like:
is this okay to use it if mine sm-g530h/ds ?
GaviPras said:
is this okay to use it if mine sm-g530h/ds ?
Click to expand...
Click to collapse
no it cant be used for u'rs but if u need i can provide
.
d1v1n3 said:
no it cant be used for u'rs but if u need i can provide
Click to expand...
Click to collapse
How can I use boot.img and recovery.img . where does it go in odin?
registre said:
How can I use boot.img and recovery.img . where does it go in odin?
Click to expand...
Click to collapse
1. First u need to install 7zip on u'r PC
2. select boot.img and recovery.img then right click on them and choose add to archive
3. choose tar in the format instead of zip and click ok
4. now u have a .tar file that contains boot and recovery so place that file in the AP inside odin
5. flash the phone and that's it, u r good to go
registre said:
How can I use boot.img and recovery.img . where does it go in odin?
Click to expand...
Click to collapse
Sadly, i already went to Samsung Service centre. They said to me to replace the emmc because it can't be flashed anymore
my assume usb debugging not checked and also FRP
now it only used as a key chain :crying:
I see the frp problem in my gran prime
I flash the original rom with odin
And problem is solved
Flash official firmware it will fix ur problem
Please I need help it says the link is empty or deleted.
Send me the right link please....
link die
d1v1n3 said:
Here are my latest stock firmware files, you can download boot and recovery. Hope I helped you if you haven't solved the problem already! :good:
Click to expand...
Click to collapse
please help me! I have the same issue. Please re-up it. thank you so much

ROM's for Huawei Y6 (2017)?

hey! i accidentally deleted a backup for my device and now i have no system to boot off of
are there any roms available for mya-l11? all the ones i see on this sub are for the 2015 models. thanks
lbxda said:
hey! i accidentally deleted a backup for my device and now i have no system to boot off of
are there any roms available for mya-l11? all the ones i see on this sub are for the 2015 models. thanks
Click to expand...
Click to collapse
I could not find any custom Roms for your device.
I could find an stock Rom for the Mya-l41 trough.
Here is an link: https://mega.nz/#!wKpT1ZaS!CV-2E4sNnUwIurskAdqCDpDawWlZD2UeABtSELk_ffc
That should be an update.app or an flashable zip.
You may get Huawei Update Extractor and extract the system.img and boot.img of the update.app
After that flash system.img and boot.img from fastboot.
Warning. This may soft brick your device.
Good luck.
If i helped press the Thanks button
Thespartann said:
I could not find any custom Roms for your device.
I could find an stock Rom for the Mya-l41 trough.
That should be an update.app or an flashable zip.
You may get Huawei Update Extractor and extract the system.img and boot.img of the update.app
After that flash system.img and boot.img from fastboot.
Warning. This may soft brick your device.
Good luck.
If i helped press the Thanks button
Click to expand...
Click to collapse
i was able to flash the boot and recovery image, but i couldnt flash the system image
lbxda said:
i was able to flash the boot and recovery image, but i couldnt flash the system image
Click to expand...
Click to collapse
Does it show an error or anything?
Fastboot flash system system.img
ok, so i found what i thought was a stock rom for my device on some spanish forum and used sp flash tool to install it
problem is, sp flash tool formatted my phone, but encountered an error trying to install the firmware and now my phone wont boot and windows says its not recognised
is there any fix to this? or is my phone bricked?
hey again! i know this post has been a wild ride of me doing stupid stuff and bricking my phone, but i got the firmware back!
only catch is that i'm receiving some nvram error (which i got on my previous phone too. i swear this is the last time im going mediatek), so if anybody has a method that can fix this it'd be highly appreciated
thanks
Hi, Ibxda.
Can you please share with us where you found the stock rom, what went wrong with flashing, and how you managed to get the firmware back?
I have a running system, but I rooted it and cannot apply official upgrades. I'd like to go back, upgrade and root again. I would appreciate the info on your progress.
ifrag_svk said:
Hi, Ibxda.
Can you please share with us where you found the stock rom, what went wrong with flashing, and how you managed to get the firmware back?
I have a running system, but I rooted it and cannot apply official upgrades. I'd like to go back, upgrade and root again. I would appreciate the info on your progress.
Click to expand...
Click to collapse
You should root with Magisk, it's systemless and it should not affect updates. If you want to update you should flash stock recovery. After you updated you are free to flash Twrp again if you want. If you are rooted with SuperSU you should uninstall SuperSU and install Magisk

Bootloop Realme XT

Hello !!! The phone is Realme XT bootloop and does not go into fastboot (((How can I restore the phone to work?thanks !!!
Aleksandr1980 said:
Hello !!! The phone is Realme XT bootloop and does not go into fastboot (((How can I restore the phone to work?thanks !!!
Click to expand...
Click to collapse
What've you done exactly?
amodeos said:
What've you done exactly?
Click to expand...
Click to collapse
Installed TWRP and flashed the stock firmware RMX1921EX_11_OTA_0130_all_FjPhN3YP2XVI.ozip
Aleksandr1980 said:
Hello !!! The phone is Realme XT bootloop and does not go into fastboot (((How can I restore the phone to work?thanks !!!
Click to expand...
Click to collapse
try this out might help
https://www.youtube.com/watch?v=yjtSteuPkI4
[
I can not go into recovery, a constant cyclic reboot
Aleksandr1980 said:
[
I can not go into recovery, a constant cyclic reboot
Click to expand...
Click to collapse
You have flashed , stock ROM that means on first boot twrp will be replaced by stock recovery unless you flashed VB meta zip to retain twrp.
You are from which region ? Coz realme released same phone in diff part of world with different internal partitions. If you flash wrong region ro m even though for same phone , it can break your phone. Check if you can go to service center.
anand28 said:
You have flashed , stock ROM that means on first boot twrp will be replaced by stock recovery unless you flashed VB meta zip to retain twrp.
You are from which region ? Coz realme released same phone in diff part of world with different internal partitions. If you flash wrong region ro m even though for same phone , it can break your phone. Check if you can go to service center.
Click to expand...
Click to collapse
Phone region Realme XT, if you flash firmware from Realme EUEX, then it will completely block, as I understand it, when flashing a different drain, the system board goes into defense and besides replacing it there is no way to restore the phone?
Aleksandr1980 said:
[
I can not go into recovery, a constant cyclic reboot
Click to expand...
Click to collapse
Try this, hold volume +, volume - and power button for about 13 Seconds. Hope this will you..
While holding all three buttons, the phone cyclically tries to enter fastboot.
Aleksandr1980 said:
While holding all three buttons, the phone cyclically tries to enter fastboot.
Click to expand...
Click to collapse
If that not helped you, I guess maybe u should go to service center
Aleksandr1980 said:
While holding all three buttons, the phone cyclically tries to enter fastboot.
Click to expand...
Click to collapse
@Aleksandr1980
do you have an XT??? what firmware was installd????? RMX1921EX_11_A.05?
and have you find a way to update the phone??
Shortys1988 said:
@Aleksandr1980
do you have an XT??? what firmware was installd????? RMX1921EX_11_A.05?
and have you find a way to update the phone??
Click to expand...
Click to collapse
We are at A15. Not sure how are still in A05
We updated through ota.
---------- Post added at 02:07 PM ---------- Previous post was at 02:04 PM ----------
If you are able to go in A05 ..then download A15 and store in your phone and use any file manager to install
When you have euex Then a05 is your Firmware, a15 will Not work
Gesendet von meinem RMX1921 mit Tapatalk
Thankyou, I had installed Android 10 pixel experience rom and eneded up in a boot loop. Now solved. Thanks
how did you resolve ? can you tell me please. i have the same problem
Realme XT in bootloop and only fastboot page is working.. i tried to flash twrp recovery, vb meta..all successfully completed on pc but recovery page not showing and when clicking on recovery it is going on bootloop..only fastboot page is working...please help me!!!
Aleksandr1980 said:
Installed TWRP and flashed the stock firmware RMX1921EX_11_OTA_0130_all_FjPhN3YP2XVI.ozip
Click to expand...
Click to collapse
Flash official stock rom fix your problem

I need help

Hello XDA developers, I'm in urgent and I have a really big problem. It sounds funny but, I deleted my realme ui recovery ,_,
I was trying to install PPUI 4.1 on my Realme 7 but I saw a tutorial that you have to erase the recovery to install TWRP. Please, I need a solution of how can I get it back. I also tried flashing a lot of recoveries and their vbmeta but nothing works. Sadly.
Edit: I'm on RMX2151_11_C.17 | Realme UI 2.0 Latest version
Here is the stock recovery
Chenes said:
Here is the stock recovery
Click to expand...
Click to collapse
You sure? I'm on RMUI2.0 and how do I flash it? Can I type 'fastboot boot recovery.img'? Are my data will be wiped?
Sorry for a lot of questions, haha
iOussamato_ said:
You sure? I'm on RMUI2.0 and how do I flash it? Can I type 'fastboot boot recovery.img'? Are my data will be wiped?
Click to expand...
Click to collapse
From what I read before, fastboot boot will only boot to that recovery file temporarily but I haven't tried it myself. It should be
Code:
fastboot flash recovery recovery.img
I'm not 100% sure it will work without problems, but if it did, your data will not be wiped.
I suggest you wait for someone else to answer coz I'm not expert. I only learned from guides in the telegram group.
Chenes said:
From what I read before, fastboot boot will only boot to that recovery file temporarily but I haven't tried it myself. It should be
Code:
fastboot flash recovery recovery.img
I'm not 100% sure it will work without problems, but if it did, you're data will not be wiped.
I suggest you wait for someone else to answer coz I'm not expert. I only learned from guides in the telegram group.
Click to expand...
Click to collapse
Can I have that Telegram group invite?
iOussamato_ said:
Can I have that Telegram group invite?
Click to expand...
Click to collapse
Realme 7 • Narzo 20 Pro • Global
Welcome To Realme 7 | Narzo 20 Pro Group • RM6785_updates(official-A12/A13)- @RM6785 / https://t.me/realme7updater • RM6785_Gaming- @RM6785Gaming • Realme 7 Cloud: @realme_7_cloud
t.me
iOussamato_ said:
You sure? I'm on RMUI2.0 and how do I flash it? Can I type 'fastboot boot recovery.img'? Are my data will be wiped?
Sorry for a lot of questions, haha
Click to expand...
Click to collapse
You can try, first, if fastboot works in your device, type adb reboot fastboot, once the script ends, quickly disconnect device from your PC and again reconnect it, you will be redirected to fastboot, if the bootloader is unlocked, you could flash it using fastboot commands.
If you can´t get it to work then you can flash it using SPFT https://spflashtool.com/, put the recovery, in the same folder, with the attached files. All the sources to can use the tool, here https://www.getdroidtips.com/bypass-mediateks-sp-flash-tool-authentication-protection/
SubwayChamp said:
You can try, first, if fastboot works in your device, type adb reboot fastboot, once the script ends, quickly disconnect device from your PC and again reconnect it, you will be redirected to fastboot, if the bootloader is unlocked, you could flash it using fastboot commands.
If you can´t get it to work then you can flash it using SPFT https://spflashtool.com/, put the recovery, in the same folder, with the attached files. All the sources to can use the tool, here https://www.getdroidtips.com/bypass-mediateks-sp-flash-tool-authentication-protection/
Click to expand...
Click to collapse
I have never used SPFlashTool before honestly, I'm just scared to break my phone or lost my data in it. I just wish to install a custom ROM
iOussamato_ said:
I have never used SPFlashTool before honestly, I'm just scared to break my phone or lost my data in it. I just wish to install a custom ROM
Click to expand...
Click to collapse
Most of the custom roms I've seen requires formatting data. Just to be sure have you unlocked bootloader already? That requires wiping data iirc.
If not then nothing will really work with what you're doing.
iOussamato_ said:
I have never used SPFlashTool before honestly, I'm just scared to break my phone or lost my data in it. I just wish to install a custom ROM
Click to expand...
Click to collapse
What you are saying now is totally different from what you firstly posted.
Installing a custom ROM doesn't require a stock recovery (just in case you are confusing), and obviously, to can switch from a stock ROM to a custom ROM, that has a total different basement, it's mandatory to format data, anyway, you should back up your data previously to do so.
SubwayChamp said:
What you are saying now is totally different from what you firstly posted.
Installing a custom ROM doesn't require a stock recovery (just in case you are confusing), and obviously, to can switch from a stock ROM to a custom ROM, that has a total different basement, it's mandatory to format data, anyway, you should back up your data previously to do so.
Click to expand...
Click to collapse
I meant, I wish to install a custom ROM but I cannot install a working recovery and wanted the stock one. Sorry
Chenes said:
Most of the custom roms I've seen requires formatting data. Just to be sure have you unlocked bootloader already? That requires wiping data iirc.
If not then nothing will really work with what you're doing.
Click to expand...
Click to collapse
Yes my bootloader is already unlocked
iOussamato_ said:
Yes my bootloader is already unlocked
Click to expand...
Click to collapse
Then you can root your phone 1st then backup your files to a computer and use migrate backup to backup app data. Note that migrate backup is limited to 4gb. Then do the fastboot flash i mentioned before
iOussamato_ said:
I meant, I wish to install a custom ROM but I cannot install a working recovery and wanted the stock one. Sorry
Click to expand...
Click to collapse
Why you are saying that you cannot install a working recovery, I don't know of any attempt you did to achieve it.
A stock recovery is not needed to install a custom ROM, and even you can't install a custom ROM using a stock recovery.
If you want to join, flashing your device and stuff like this, better learn how to use SPFT, also you have this tool https://github.com/bkerler/mtkclient, this can save your device, if something in the process goes wrong.
SubwayChamp said:
Why you are saying that you cannot install a working recovery, I don't know of any attempt you did to achieve it.
A stock recovery is not needed to install a custom ROM, and even you can't install a custom ROM using a stock recovery.
If you want to join, flashing your device and stuff like this, better learn how to use SPFT, also you have this tool https://github.com/bkerler/mtkclient, this can save your device, if something in the process goes wrong.
Click to expand...
Click to collapse
I wanted to flash stock rom to downgrade into Realme UI 1.0 then flash the custom recovery so I can flash a custom rom
iOussamato_ said:
I wanted to flash stock rom to downgrade into Realme UI 1.0 then flash the custom recovery so I can flash a custom rom
Click to expand...
Click to collapse
OK, then what you are trying to install is an "old" Android 10 based ROM, if this is the case, then just download a stock Android 10 ROM, flash it through SPFT, then use SPFT to flash the custom recovery, transfer the custom ROM to your external SD Card (preferably) or sideload it, through recovery, and flash it. In the process you need to unlock bootloader, and immediately to flash the custom recovery, boot to it, using hardware buttons.
SubwayChamp said:
OK, then what you are trying to install is an "old" Android 10 based ROM, if this is the case, then just download a stock Android 10 ROM, flash it through SPFT, then use SPFT to flash the custom recovery, transfer the custom ROM to your external SD Card (preferably) or sideload it, through recovery, and flash it. In the process you need to unlock bootloader, and immediately to flash the custom recovery, boot to it, using hardware buttons.
Click to expand...
Click to collapse
Do you know a tutorial of how to use SPFlashTool?
iOussamato_ said:
Do you know a tutorial of how to use SPFlashTool?
Click to expand...
Click to collapse
How to use SP Flash Tool
This is a step-by-step tutorial on how to flash stock rom to a Mediatek device using Smart Phone Flash tool. SP Flash tool is one application you could find very useful in fixing extreme cases of a br
www.hovatek.com
Alright so, it might sound funny but I think I fixed it. I was playing with my downloaded recoveries until I downloaded the stock recovery, it is compatible but when I do fastboot reboot recovery I get stuck at Orange State for like 30min and it boots me into the recovery so does anyone know a solution for this? And thank you for everything and sorry for wasting y'all's time. Sincereley.
iOussamato_ said:
Alright so, it might sound funny but I think I fixed it. I was playing with my downloaded recoveries until I downloaded the stock recovery, it is compatible but when I do fastboot reboot recovery I get stuck at Orange State for like 30min and it boots me into the recovery so does anyone know a solution for this? And thank you for everything and sorry for wasting y'all's time. Sincereley.
Click to expand...
Click to collapse
You have to boot to recovery using hardware buttons (PWR + vol. down), in regard to orange state, this is absolutely normal when bootloader was unlocked, it's not an issue but a cosmetic thing.

Categories

Resources