CF-Auto-Root is no more working to root Samsung A8 after latest Marshmallow update. So here I'll tell you another way to root your A800F or A800I. Also I'll tell you how to install TWRP and Install Xposed. Is little bit complicated but this works.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Prerequisite :
On PC
USB Driver
Odin
Minimal ADB
TWRP Recovery
[*]On Phone Storage
SuperSU
Xposed Installer apk
Xposed SDK
DOWNLOAD LINKS BELOW
Steps
Download all files in a folder and install USB Driver (Skip if already installed). Extract Minimal ADB. Save SuperSU zip on your phone's storage.
Enable developer option on phone ( Tap “Build number” seven times to enable Developer option ).
Enable OEM unlock and USB debugging under developer option.
Put phone in download mode ( Hold vol down + home + power key to reboot to download mode )
Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number.
Now select the recovery file that you have to flash/install on your phone. Click on ‘PDA’ / ‘AP’ and select the file ‘recovery.tar’. (In ODIN, check the Auto Reboot and F. Reset Time options, if not already.) Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete. After the installation is completed, your phone will reboot normally.
Next you have to launch the ADB drivers file. Launch command.bat file from the ADB folder and give the first command to check whether the device is successfully connected to PC or not. A popup will open in your phone. tap allow.
Code:
adb devices
Enter another command to reboot your device into recovery:
Code:
adb reboot recovery
Now you are on TWRP recovery. Click on Install and select SuperSU file that you downloaded on your phone in step 1. and flash.
Flash Xposed SDK too if you want to use Xposed framework
You will get bootloop first time. Its normal. And first boot may take about 10 mins. You don't have to worry. After reboot install Xposed installer to use Xposed.
Done :laugh:
Notes
Do not reboot to TWRP recovery using key combinations. Use any rebooter app to reboot to recovery.
This way is enforcing not permissive. I am searching for permissive. I'll update.
This method works on latest stock firmware.
Downloads
On PC
USB Driver size: 9.2MB
Odin size: 1.1MB
Minimal ADB size: 628.5KB
TWRP Recovery (A800F) size: 10.4MB
TWRP Recovery (A800I) size: 10.4MB
[*]On Phone Storage
SuperSU size: 4.1MB
XposedInstaller size: 611.8KB
xposed-v85.1-sdk23-arm.zip size: 4.6MB
xposed-uninstaller.zip size: 304KB
no command error
z.
adarshbp010 said:
after typing in in the command.bat
it say updating android in my phone after that says no command
did i do something wrong?
Click to expand...
Click to collapse
You have to launch command.bat please read step 7 again. :good:
Hi,
I guess with proper usb driver for other Samsung A series it should work as well ?
Thank you for this guide btw (even though it is not for my device)
shu006 said:
You have to launch command.bat please read step 7 again. :good:
Click to expand...
Click to collapse
..
adarshbp010 said:
Sry i was using some other method
Ur method bought me to a menu sayin reboot now ,install from adb ,install from sd thing
Wat should i do? ;-;
Click to expand...
Click to collapse
Are you on twrp ?
I tried this method and sadly it does not work on my firmware version. Gets stuck on the boot screen when you reboot to recovery and says recovery is not seandroid enforcing...
Version is A800IXXU2BPG7
hiroprotagonist said:
I tried this method and sadly it does not work on my firmware version. Gets stuck on the boot screen when you reboot to recovery and says recovery is not seandroid enforcing...
Version is A800IXXU2BPG7
Click to expand...
Click to collapse
my problem is sam. whtas we can. help please
I did all the steps..
but I get seandroid error..
help please
fatihyildirim said:
I did all the steps..
but I get seandroid error..
help please
Click to expand...
Click to collapse
My A800i too.
Sent from my SM-A800I using XDA-Developers Legacy app
fatihyildirim said:
my problem is sam. whtas we can. help please
Click to expand...
Click to collapse
fatihyildirim said:
I did all the steps..
but I get seandroid error..
help please
Click to expand...
Click to collapse
ethanhunt2202 said:
My A800i too.
Sent from my SM-A800I using XDA-Developers Legacy app
Click to expand...
Click to collapse
hiroprotagonist said:
I tried this method and sadly it does not work on my firmware version. Gets stuck on the boot screen when you reboot to recovery and says recovery is not seandroid enforcing...
Version is A800IXXU2BPG7
Click to expand...
Click to collapse
Thread updated. Please download recovery for A800I from download section.
Good working.
Sent from my SM-A800I using XDA-Developers Legacy app
Does the bluetooth work flawlessly using this method?
jumpinjellyfish said:
Does the bluetooth work flawlessly using this method?
Click to expand...
Click to collapse
yes
Cant Enter Recovery Mode
sorry can you help me i do every step you write but it not working it said no command installed. What should i do please help me( my phone is A800F)
Thien170598 said:
sorry can you help me i do every step you write but it not working it said no command installed. What should i do please help me( my phone is A800F)
Click to expand...
Click to collapse
Firmware version ?
@shu006 Xposed framework doesn't want to download....I flashed that xposed SDK and when I installed the app, neither Download/update nor uninstall was available to click on.
biso46 said:
@shu006 Xposed framework doesn't want to download....I flashed that xposed SDK and when I installed the app, neither Download/update nor uninstall was available to click on.
Click to expand...
Click to collapse
Dont look at that.. Just see if framework is installed or not.
Links not working..
Related
Please anyone tell me ,how to root my Karbonn titanium s1 plus:laugh:
shivkiran9 said:
Please anyone tell me ,how to root my Karbonn titanium s1 plus:laugh:
Click to expand...
Click to collapse
Follow these steps.
1. First make sure that you have your device drivers installed on your PC.
2. Download your preferred superuser package. ( search the forum for superuser.zip files or just google it)
3. Download CWM recovery image file for your phone.
4. Once you have downloaded these two files, copy recovery.img to the folder where you have fastboot and adb. (If you have no idea what they are, please search the forum) and copy superuser.zip package to your phone's SD card.
5. Now connect your device to your PC. Make sure that developer options is enabled on your phone.
6. Open command prompt window where you have set up ADB. To do this press shift key on your computer’s keyboard and right click on the ADB folder, then select open command window here.
7. Type these commands in the command prompt.
fastboot devices (if you find anything appear on the cmd window, your device is connected)
fastboot flash recovery recovery.img
8. Then, switch off your mobile. Press Volume up+down + power button to enter into recovery.
9. Select Install from zip option -> Select zip from sdcard -> Choose superuser.zip.
10. It will install, then reboot your device.
You will find Superuser app in your phone, which means that your phone is successfully rooted. :good:
Hit thanks if this helped. If you need further help, PM me or search the forum. :laugh:
is this method for S1 plus or S1
dev27 said:
Follow these steps.
1. First make sure that you have your device drivers installed on your PC.
2. Download your preferred superuser package. ( search the forum for superuser.zip files or just google it)
3. Download CWM recovery image file, for your titanium s1 from the link below.
CWM recovery.img
4. Once you have downloaded these two files, copy recovery.img to the folder where you have fastboot and adb. (If you have no idea what they are, please search the forum) and copy superuser.zip package to your phone's SD card.
5. Now connect your device to your PC. Make sure that developer options is enabled on your phone.
6. Open command prompt window where you have set up ADB. To do this press shift key on your computer’s keyboard and right click on the ADB folder, then select open command window here.
7. Type these commands in the command prompt.
fastboot devices (if you find anything appear on the cmd window, your device is connected)
fastboot flash recovery recovery.img
8. Then, switch off your mobile. Press Volume up+down + power button to enter into recovery.
9. Select Install from zip option -> Select zip from sdcard -> Choose superuser.zip.
10. It will install, then reboot your device.
You will find Superuser app in your phone, which means that your phone is successfully rooted. :good:
Hit thanks if this helped. If you need further help, PM me or search the forum. :laugh:
Click to expand...
Click to collapse
Is this method works on S1 plus also?
Please confirm, as you post you are quoting CWM for S1
Thanks in advance
nanachitang420 said:
Is this method works on S1 plus also?
Please confirm, as you post you are quoting CWM for S1
Thanks in advance
Click to expand...
Click to collapse
I'm sorry for my carelessness, the download link I attached in the previous post was for S1. The method is similar to almost all android devices. The only thing you should worry about is CWM. You can follow the same steps but make sure that you have a CWM for your phone. If not, you may try porting it to your phone or just download ROM manager on your phone, it will provide you with all the options for flashing CWM. You can download ROM Manager from google play. Other than that, the steps are all the same.
Signature verification failed
dev27 said:
Follow these steps.
1. First make sure that you have your device drivers installed on your PC.
2. Download your preferred superuser package. ( search the forum for superuser.zip files or just google it)
3. Download CWM recovery image file for your phone.
4. Once you have downloaded these two files, copy recovery.img to the folder where you have fastboot and adb. (If you have no idea what they are, please search the forum) and copy superuser.zip package to your phone's SD card.
5. Now connect your device to your PC. Make sure that developer options is enabled on your phone.
6. Open command prompt window where you have set up ADB. To do this press shift key on your computer’s keyboard and right click on the ADB folder, then select open command window here.
7. Type these commands in the command prompt.
fastboot devices (if you find anything appear on the cmd window, your device is connected)
fastboot flash recovery recovery.img
8. Then, switch off your mobile. Press Volume up+down + power button to enter into recovery.
9. Select Install from zip option -> Select zip from sdcard -> Choose superuser.zip.
10. It will install, then reboot your device.
You will find Superuser app in your phone, which means that your phone is successfully rooted. :good:
Hit thanks if this helped. If you need further help, PM me or search the forum. :laugh:
Click to expand...
Click to collapse
cwm is compulsory or i can use android system recovery which already in s1 plus
i've tried this method. downloaded superuer.zip and tried to flash with android system recovery but it says "E:failed to verify whole-file signature;E:signature verification failed"
i've tried many rooting software but no luck so far.
vipul0197 said:
cwm is compulsory or i can use android system recovery which already in s1 plus
i've tried this method. downloaded superuer.zip and tried to flash with android system recovery but it says "E:failed to verify whole-file signature;E:signature verification failed"
i've tried many rooting software but no luck so far.
Click to expand...
Click to collapse
U have to either user CWM or TWRP recoveries. Android system recovery cannot be used to install superuser.
dev27 said:
U have to either user CWM or TWRP recoveries. Android system recovery cannot be used to install superuser.
Click to expand...
Click to collapse
Still unsuccessful. Can you please shed some light on how to go about with rooting this particular model? Thanks
judebrent87 said:
Still unsuccessful. Can you please shed some light on how to go about with rooting this particular model? Thanks
Click to expand...
Click to collapse
What error are you getting?
I run superuser after rebooting the phone while using the volume + power buttons. But after installation when I check root it says no access.
judebrent87 said:
I run superuser after rebooting the phone while using the volume + power buttons. But after installation when I check root it says no access.
Click to expand...
Click to collapse
Try doing this. Install SuperSU using CWM. If it installs, reboot the phone and check whether it has been installed by looking at the All apps section under settings. Then try to use any root application. If you encounter any problems in these sections, kindly specify where you get the problem.
Waiting for device
I am facing different problem.
Command prompt displays nothing after writing fastboot devices and on further process it says waiting for device.
i have karbonn drivers installed in my pc with windows 7 and usb debugging is on.
dev27 said:
Try doing this. Install SuperSU using CWM. If it installs, reboot the phone and check whether it has been installed by looking at the All apps section under settings. Then try to use any root application. If you encounter any problems in these sections, kindly specify where you get the problem.
Click to expand...
Click to collapse
How do I manage to get CWM for this model. All versions I've downloaded off playstore says it doesn't recognize this model!
Anybody got success?
Anybody tried this method?
Me have deleted SU accidently from system/xbin so, cant try rather is not working for me.
Better than all these cwm methods u download any framaroot.apk search it on google or on 4shared.com and just select install superSU and press gandalf option!!!
Hurray! Your phone is now rooted!
Just reboot to access the superuser app!
Press thanks button if i helped you!
Sent from my GT-S7562 using XDA Free mobile app
Isbit harmful for device ????
Sent from my Titanium S1 Plus using XDA Free mobile app
akshykhade said:
Isbit harmful for device ????
Sent from my Titanium S1 Plus using XDA Free mobile app
Click to expand...
Click to collapse
No way!!!!
It will not harm your device!!!!
Just use the updated version of the framaroot app!!!
Press thanks button if I helped you!!!!!!!
Sent from my GT-S7562 using XDA Free mobile app
I am just successfully rooted my device...
But can i upgrade rom to kitkat...
I tried it using cynogenmod but the error is ur device not supported..
Is there any way to upgrade rom
Sent from my Titanium S1 Plus using XDA Free mobile app
how can i flash rom and upgrade to 4.4 kitkat
Sent from my Titanium S1 Plus using XDA Free mobile app
how?
akshykhade said:
I am just successfully rooted my device...
But can i upgrade rom to kitkat...
I tried it using cynogenmod but the error is ur device not supported..
Is there any way to upgrade rom
Sent from my Titanium S1 Plus using XDA Free mobile app
Click to expand...
Click to collapse
Please confirm how you rooted the device? Which method you used?
My device is karbonn titanium s1 plus
And rooted using rootgenius application..
Sent from my Titanium S1 Plus using XDA Free mobile app
100%ROOT + TWRP RECOVERY
NOTE:This Was Tested By Me On TAB 4 t231 with Firmware Version T231XXU0ANG1_T231ODD0ANF3_INU ; It May Work With Latest Firmware Verions , But I Haven't Tested
REQUIREMENTS:
* PC
*TAB 4 T231
*DATA CABLE
*PROPER DRIVERS INSTALLED
*ODIN V3.09.zip HERE and Extract thanks to @thisisapoorusernamechoice
*Download TWRP from HERE AND EXTRACT
* DOWNLOAD SuperSU from HERE
INSTRUCTIONS:
RECOVERY :
Put your tablet in download mode by Pressing the Home button + Power + Volume Down; Release buttons ,wen u see a warning ; then you should press the volume up (vol +) to continue to download mode.
* Run Odin v3.09 and connect tablet, The box in odin will turn to light blue box ID: COM;
* Check The AP box and locate the unzipped file TWRP file recovery.img.tar.md5;
*Finally click on the Star button and wait for few seconds until Odin process and show you the notice Pass in green and completely restart the tablet, click Exit to exit Odin.
RECOVERY WAS SUCCESSFULLY FLASHED
ROOT
*BOOT INTO RECOVERY BY PRESSING POWER+HOME+VOL UP
*NOW SELECT INSTALL ZIP FROM SD CARD
* CHOOSE THE sUPERSU.ZIP
*CONFIRM YES BY SWIPING
REBOOT CHECK WITH ROOT CHECKER
SUCESSFULLY ROOTED Tab 4 t231
Credits and drivers
DRIVERS
*INSTALL SAMSUNG USB DRIVERS FROM HERE HERE
*IF IT DOESNT DETECT MOBILE , TRY PDANET+ DRIVERS FROM HERE
CREDITS
*ALLAH(SWT)
*GOOGLE
*XDA
*TWRP & UNKNOWN COMPILER
* @Chainfire for Supersu.zip
*odin
*Myself(ofcourse)
Can i use this witn sm t237p
Sent from my SM-T237P using XDA Premium 4 mobile app
shawn718 said:
Can i use this witn sm t237p
Sent from my SM-T237P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i second this. will it work with the SM-T237P?
ATTENTION! Do NOT use the download links for Odin in the OP! It has been reported that the link will install malware on your computer. If you need Odin 3.07 or 3.09, I have attached them to the bottom of this post, both files are 100% safe. They're zip files, just extract the folder inside to your desktop; to run Odin just double click the .exe file, yes it's that easy. @Faiyaz5yaz thank you for making this thread, it is always a good thing to instruct users how to root their devices, but please either change the Odin download link or at the very least remove it from the OP. Unfortunately it messed up another user's computer so bad he had to reinstall windows
thisisapoorusernamechoice said:
ATTENTION! Do NOT use the download links for Odin in the OP! It has been reported that the link will install malware on your computer. If you need Odin 3.07 or 3.09, I have attached them to the bottom of this post, both files are 100% safe. They're zip files, just extract the folder inside to your desktop; to run Odin just double click the .exe file, yes it's that easy. @Faiyaz5yaz thank you for making this thread, it is always a good thing to instruct users how to root their devices, but please either change the Odin download link or at the very least remove it from the OP. Unfortunately it messed up another user's computer so bad he had to reinstall windows
Click to expand...
Click to collapse
updated !!! thank u
Worked like a charm on my T231
THANK YOU SOOO MUCH
Sorry but i follow the Stephen. I got a sm-t231 and flash with odin and see the pass sign but when I reboot into recovery isn't see the TWRP recovery just the stock recovery... What's wrong?
Dark_Cristian said:
Sorry but i follow the Stephen. I got a sm-t231 and flash with odin and see the pass sign but when I reboot into recovery isn't see the TWRP recovery just the stock recovery... What's wrong?
Click to expand...
Click to collapse
C,
when you flash recovery with odin you must DESELECT auto restart.
when the flash is done [res-ok] disconnect your tab and manually reboot to RECOVERY.
then reboot as normal.
m
Dark_Cristian said:
Sorry but i follow the Stephen. I got a sm-t231 and flash with odin and see the pass sign but when I reboot into recovery isn't see the TWRP recovery just the stock recovery... What's wrong?
Click to expand...
Click to collapse
http://forum.xda-developers.com/tab-4/development/root-root-twrp-recovery-samsung-galaxy-t3021471
http://forum.xda-developers.com/tab-4/general/root-tab-4-sm-t231-gsm-wifi-t3010102
@Faiyaz5yaz
Thanks TWRP works great on my Tab 4 T231
:good:
Hi all!
Team Win Recovery Project 3.0.0-1 for Samsung Galaxy A5 (2015)
Before flashing TWRP, please make a backup of your current recovery.
DISCLAIMER
Code:
#include
/*
* Your warranty is now void.
* I'm not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation Instructions:
Using Flashify
1. Download the TWRP image for your variant using the link at the end of this post.
2. Install Flashify via Google Play Store and launch it. Grant the SuperSU request.
3. Once it's done, select the option flash recovery then select the .img you have downloaded.
4. Reboot to recovery using home button and Vol+.
5. After 5-6 seconds you can see the TWRP splash screen!
6. Enjoy your TWRP!
Using Odin
1. Download the TWRP flashable zip.
2. Launch Odin add on "AP" the TWRP you downloaded at the end of this post.
4. Switch off your phone, plug it to the PC.
5. Press the home button, the Vol- and on/off keys.
6. You should have a warning screen, press the Vol- button again.
7. Click on start button on Odin.
8. The phone will reboot and enjoy your TWRP !
DownloadsOdin 3.10.7 Flash Tool
http://dl.sammobile.com/Odin3_v3.10.7.zip
SM-A500FU
• TWRP 3.0.0-1 (to flash with Flashify)
https://www.androidfilehost.com/?fid=24459283995311955
• TWRP 2.8.7.0 Odin Flashable:
https://www.androidfilehost.com/?fid=24052804347836928
SM-A500F/G/H/M
• TWRP 3.0.0-1(to flash with Flashify)
https://www.androidfilehost.com/?fid=24459283995311938
• TWRP 2.8.7.0 Odin flashable (to flash with Odin)
Lollipop:
https://www.androidfilehost.com/?fid=24052804347836940
KitKat:
https://www.androidfilehost.com/?fid=24052804347840936
----------------------------------------------------------------------------------------------------------
Changelog
• 2015-09-05:
* Bugs fixes, fixed CM12.1 installation error, fixed auto-reboot on Recovery, increased launch speed.
• 2016-04-03:
* Updated to TWRP 3.0.0-1
* New UI.
* Adoptable Storage.
* Added support for USB-OTG on all variants.
THanks
Thanks bro
Could you explain .. is this normal fully functional TWRP, and we can make ie backup current stock ROM, play with xposed wanam and (in close future) another ROMs, and if something goes wrong, restore stock from backup?
Adaho0 said:
Could you explain .. is this normal fully functional TWRP, and we can make ie backup current stock ROM, play with xposed wanam and (in close future) another ROMs, and if something goes wrong, restore stock from backup?
Click to expand...
Click to collapse
Yes,
This is great, realy want to try this out. Where can i get root for the A500FU Lollipop?
SV3NNER said:
This is great, realy want to try this out. Where can i get root for the A500FU Lollipop?
Click to expand...
Click to collapse
With cf auto root?
mygalaxya said:
With cf auto root?
Click to expand...
Click to collapse
I can only find the Kitkat 4.4.4 version, does this work on lollipop 5.0.2?
SV3NNER said:
I can only find the Kitkat 4.4.4 version, does this work on lollipop 5.0.2?
Click to expand...
Click to collapse
I think.
Due to the similarity of the a300, would it work too, or fail because of the screen-resolution?
Christoph.bcn said:
Due to the similarity of the a300, would it work too, or fail because of the screen-resolution?
Click to expand...
Click to collapse
Yes, and little other things
First at all thanx man, i try to flash in my a5 500f put i got kernel error .
tofy4ever said:
First at all thanx man, i try to flash in my a5 500f put i got kernel error .
Click to expand...
Click to collapse
It's weird
mygalaxya said:
Yes, and little other things
Click to expand...
Click to collapse
Thought so. Thanks anyway.
mygalaxya said:
It's weird
Click to expand...
Click to collapse
work fine now i try again> first i flash as boot img as said in the [tut] and give me error now i flash as recovery
tofy4ever said:
work fine now i try again> first i flash as boot img as said in the [tut] and give me error now i flash as recovery
Click to expand...
Click to collapse
Are you on Kitkat or Lollipop?
mygalaxya said:
Are you on Kitkat or Lollipop?
Click to expand...
Click to collapse
Lollipop
tofy4ever said:
Lollipop
Click to expand...
Click to collapse
Do you have a computer? Can you use Odin or not?
mygalaxya said:
Do you have a computer? Can you use Odin or not?
Click to expand...
Click to collapse
Yes i have acomputer. The recovery work for me now its all ok
tofy4ever said:
Yes i have acomputer. The recovery work for me now its all ok
Click to expand...
Click to collapse
Good, you've installed TWRP following my steps?
mygalaxya said:
Good, you've installed TWRP following my steps?
Click to expand...
Click to collapse
Yes i use flashify and flash it as recovery img and it's work now
Hellow My Friends...
I Create Boot.img File for Root All Xperia M4 Aqua Variants in Unlock Bootloader And 26.3.A.1.33 Firmware, Hope Work for you
I And My Friend Test All of Boot.img in All Variants
Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,thermonuclear war, or you getting fired because the alarm app failed!!
*Please make nandroid backup before flashing this as a preaution!
Do Steps Like Under:
1- Download Your Boot.img variant And TWRP
E2303:
http://www.mediafire.com/file/y6pagtazu5mqnc4/boot+E2303.rar
E2306:
https://drive.google.com/file/d/0By8Royf_hNU8Z29oUUNVeDgzTGc/view?usp=drivesdk
E2312:
https://www.mediafire.com/?3who10e6a0lxwct
E2333:
https://www.mediafire.com/?ltpscpy3dpy6m7n
E2353:
https://drive.google.com/file/d/0B9PdiUEYtxNkdTZEaF9GT082REU/view
TWRP:
https://drive.google.com/file/d/0Bwfkh9Wew36kem9wdDQ1enJkUmc
** E2363 Users can use E2333 variant Boot.img **
2- Copy Boot.img And TWRP 3.0.2-0 in C:/adb Drive
3- Plug your device to PC in fastboot Mode
4- type cmd in C:/adb Folder AdressBar
5- Type in adb For Flash Boot.img:
fastboot flash boot boot.img
And For TWRP:
fastboot flash recovery recovery.img
6- Unplug your phone and restart it
Credits : @dani020110 For TWRP recovery
** Prees Thanks if i helped you **
Root works fine
Super all works fine with root and SuperSU App!
But you have an idea why the mobile network not work? Is it possible the reason is the boot.img, or a fault with the Provider?
Floh1990 said:
Super all works fine with root and SuperSU App!
But you have an idea why the mobile network not work? Is it possible the reason is the boot.img, or a fault with the Provider?
Click to expand...
Click to collapse
Whats your variant and your rom? if you install true Boot.img its impossible.
After a provider sms to config the Internet and mms it works! But not by itself, I had to request it manually.
The phone variant is E2303 with Android 6.
Floh1990 said:
After a provider sms to config the Internet and mms it works! But not by itself, I had to request it manually.
The phone variant is E2303 with Android 6.
Click to expand...
Click to collapse
Okay bro but its not for Boot.img, its work great My friends test all of them
Locked Bootloader
EHSAN™ said:
Okay bro but its not for Boot.img, its work great My friends test all of them
Click to expand...
Click to collapse
Does this work with locked bootloader devices?
kgalv419 said:
Does this work with locked bootloader devices?
Click to expand...
Click to collapse
No, adb Need Unlock Bootloader.
EHSAN™ said:
No, adb Need Unlock Bootloader.
Click to expand...
Click to collapse
Oh I see, ok thanks so much, guess everyone with locked bootloaders will have to wait probably months before we get root on marshmallow.
I cannot unlock bootloader on e2363 Build No.- 26.3.B.1.33. Please help. I used latest flashtool. I am quite a noob at rooting I checked from service menu. I have permission to unlock bootloader. But flashtool says "root access denied" and "you do not have permission to unlock bootloader officially". Please help! :crying:
prathamesh95 said:
I cannot unlock bootloader on e2363 Build No.- 26.3.B.1.33. Please help. I used latest flashtool. I am quite a noob at rooting I checked from service menu. I have permission to unlock bootloader. But flashtool says "root access denied" and "you do not have permission to unlock bootloader officially". Please help! :crying:
Click to expand...
Click to collapse
Same problem with e2303
Hello,
About unlocking bootloader issues:
1) Unplug USB cable if plugged.
2) Start your phone in "normal" mode (no adb, no fastboot).
3) Check "Enable OEM unlock" AND "Enable USB debugging" under the "Developer Options" menu (press 5 times the "About phone" settings menu to make the hidden "Developer Options" menu appear if needed).
See attachements (it's in french sorry)
4) Plug the USB cable and accept the security key on the phone (check the checkbox "Always accept" - or similar).
5) Power off your phone and restart in fastboot.
6) Ensure your device is detected by your computer (command should be something like "fastboot devices" - check the fastboot help for exact syntax).
7) Proceed to the unlocking by launching the command with your unlock key.
Note: if this procedure fails, unplug your phone, ensure there is no adb running processes and kill them if there are.
Then restart at step 5.
Regards
it says ''cannot load recover.img
russelpena06 said:
it says ''cannot load recover.img
Click to expand...
Click to collapse
Insert Name of Recovery Carefully.
how to update to SuperSu 2.79 ?
fadyzico said:
how to update to SuperSu 2.79 ?
Click to expand...
Click to collapse
Do not Update, Because Lose SU Binary And Root. Use This Version 2.79 Not Diffrent With 2.78
EHSAN™ said:
Do not Update, Because Lose SU Binary And Root. Use This Version 2.79 Not Diffrent With 2.78
Click to expand...
Click to collapse
hi. i have this problem. i updated supersu from playstore, and now it wants to update binary but it wont succeed. 2303 still is rooted (rootcheck su v.2.77). have tried to fastboot boot and recovery and it says done but nothing changed. what should i do now
msa78 said:
hi. i have this problem. i updated supersu from playstore, and now it wants to update binary but it wont succeed. 2303 still is rooted (rootcheck su v.2.77). have tried to fastboot boot and recovery and it says done but nothing changed. what should i do now
Click to expand...
Click to collapse
You Must Be Flash System And Kernel With Flashtools And Do Root Steps Again.
This phone was worst buy, has only like 1gb free storage for apps, cannot be rooted correctly, cannot use sdcard as adoptive storage, cannot install custom rom . worst buy .
will this work for 26.3.B.1.33 ?!
ahmedelwakil07 said:
will this work for 26.3.B.1.33 ?!
Click to expand...
Click to collapse
This is only for 33 build
Team Win Recovery Project 3.x, or TWRP3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
HTML:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* y
Let’s start with the installation process
First you need to unlock your bootloader. You can do so by enabling developer settings first, enable oem unlocking, then shut down your phone, hold volume up and down at the same time and while holding them plugin your charger. Your phone now should show a green screen with instructions to unlock the bootloader. Just follow them and after the unlocking your data should get wiped. After that your device will boot up and land in setup screen. Do not setup anything, just skip as much as possible, because your phone will get wiped again. Enable developer settings and make sure oem unlocking is greyed out and enabled. (If it does not show up, connect to a network first!)
Now you need to overwrite vbmeta partition, so you can flash third party partitions. Download vbmeta_disabled.tar then go into download mode on your device. Put vbmeta_disabled.tar to userdata in Odin, click start. This should finish pretty quickly, so pay attention when your device reboots, because you need to boot into recovery (Hold power and volume up after the screen turns black). When booted into recovery, wipe your data and reboot normally into system. Now you can setup your phone as usual and make sure oem unlocking is still greyed out and enabled!
Time to flash recovery. Download (link is at the end of this post). . In Odin put the tar file in AP and simply hit start. Congrats you now have TWRP installed!
BOOT TO TWRP RECOVERY AND MAKE FORMAT DATA AND WIPE SYSTEM
Developers specific details
Sources
https://github.com/blacktox/r1q
https://github.com/Grarak/android_bootable_recovery-1
vbmeta_disabled
https://drive.google.com/file/d/1_Ws71h--Z7YBGfllsbt8qlJElXRxTB1p/view?usp=sharing
twrp based on A805FXXU4BTC3 so you must on firmware binary 4
https://drive.google.com/file/d/1FkYQY_O7daPFX6lWt66Bn-aXadRrDWez/view?usp=sharing
XDA:DevDB Information
twrp galaxy a80, Tool/Utility for the Samsung Galaxy A80
Contributors
blackbuga
Version Information
Status: Testing
Created 2019-11-09
Last Updated 2020-07-03
Awesome! Where do I get the vbmeta.tar file?
Nazato said:
Awesome! Where do I get the vbmeta.tar file?
Click to expand...
Click to collapse
https://github.com/Grarak/android_device_samsung_a70q-twrp/releases/download/3.3.1-3/vbmeta.tar
Sent from my SM-A805F using XDA-Developers Legacy app
blackbuga said:
https://github.com/Grarak/android_device_samsung_a70q-twrp/releases/download/3.3.1-3/vbmeta.tar
Sent from my SM-A805F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Just got it to boot and the touchscreen is unresponsive. Quite a bummer since twrp is the only way to root as far as I've concluded :crying:
Nazato said:
Just got it to boot and the touchscreen is unresponsive. Quite a bummer since twrp is the only way to root as far as I've concluded :crying:
Click to expand...
Click to collapse
Rename it to recovery.img then compress to tar file and flash it
Fixed touchscreen
When reboot twrp flash again this img as image in boot to complete rooting
https://www.mediafire.com/file/ccix57wmz61crzd/magisk_patched.img/file
Sent from my SM-A805F using XDA-Developers Legacy app
blackbuga said:
Rename it to recovery.img then compress to tar file and flash it
Fixed touchscreen
When reboot twrp flash again this img as image in boot to complete rooting
https://www.mediafire.com/file/ccix57wmz61crzd/magisk_patched.img/file
Sent from my SM-A805F using XDA-Developers Legacy app
Click to expand...
Click to collapse
I followed your steps to no avail. First try, twrp didn't even boot up completely as it was stuck in the twrp logo screen. My second attempt was wiping data first using the stock recovery, then flashing twrp. Twrp booted up and I was happy as heck, but the touchscreen was unresponsive. I've completely set up my phone again after giving up. I wouldn't mind losing all my data again just to gain root, but I don't want to lose it for nothing
Now it just doesn't load further than the logo! !(
UPLOAD NEW BUILD
FIX TOUCHSCREEN
https://github.com/blacktox/r1q/releases/download/TWRP/recovery.img
blackbuga said:
UPLOAD NEW BUILD
FIX TOUCHSCREEN
https://github.com/blacktox/r1q/releases/download/TWRP/recovery.img
Click to expand...
Click to collapse
Thanks for fixing the issues! Bummer that I can't root. It's just stuck on bootloop with the Samsung splash image.
You must as sg7 firmware
Then flash twrp recovery
Open magisk manager and patch this recovery.img
And reboot to twrp instal image seltect magisk patched and flash it at boot
Wipe all and reboot
Now you have twrp and rooted
For patching recovery with magisk use this custom source
https://github.com/blacktox/work/blob/master/ianmacd.json
For patching with magisk 19.4
Sent from my SM-A805F using Tapatalk
blackbuga said:
You must as sg7 firmware
Then flash twrp recovery
Open magisk manager and patch this recovery.img
And reboot to twrp instal image seltect magisk patched and flash it at boot
Wipe all and reboot
Now you have twrp and rooted
For patching recovery with magisk use this custom source
https://github.com/blacktox/work/blob/master/ianmacd.json
For patching with magisk 19.4
Sent from my SM-A805F using Tapatalk
Click to expand...
Click to collapse
Thanks, man! This finally worked. Any way I can donate to you or something like buy you a beer or what
Is anything working? Decryption? Back-up? Restore?
I have saw the a70 page and it included many custom roms. Is it easy to port it over to the a80? I really want lineage os on my phone. Thanks
(I have an SM-A8050)
@blackbuga ; how about detail explaining about sg7 firmware how can we get it? what about give us step by step way of unlocking until flash twrp within provided link donwload files we needed, & last could u gv us stock recovery img for emergency used while we faced some trouble like bootloop or something else we dont expected. so we dont needed to flash whole firmware stock & make us felt safety & shortcut the time of we got trouble. thx for great works
Hello blackbuga,
I recently installed your unofficial TWRP-build for the A80.
I want to let you know that it is impossible to flash ROMs successfully. I am a TouchWiz developer since 2016 and I wanted to continue with OneUI.
So, I was porting the A71 firmware, but it didn't let me install the zip. It ended with the Error 7.
Here's a part of the log:
" -- Setting ROM Permissions
ApplyParsedPerms: removexattr of /system/system/usr/srec/en-US/wordlist.syms to 0 failed: Operation not supported on transport endpoint
ApplyParsedPerms: removexattr of /system/system/usr/srec/en-US/wordlist.syms to 0 failed: Operation not supported on transport endpoint
script aborted: set_metadata_recursive: some changes failed
set_metadata_recursive: some changes failed
Updater process ended with ERROR: 7 "
It seems like it's a problem of the recovery. I hope to get an answer from you.
Greetings
Soon i realase new build recovery
Im waiting samsung realase new source s4 or u4
blackbuga said:
Soon i realase new build recovery
Im waiting samsung realase new source s4 or u4
Click to expand...
Click to collapse
Will this solve the above mentioned problem, or don't you know what the problem might be?
n0tavailable said:
Will this solve the above mentioned problem, or don't you know what the problem might be?
Click to expand...
Click to collapse
probelme related to your port not from recovery
edit the permission
Is it possible to installieren android 10 GSI i allways in bootloop and restart in recovery
Nazato said:
Thanks, man! This finally worked. Any way I can donate to you or something like buy you a beer or what
Click to expand...
Click to collapse
Bro @Nazato, could you write steps by steps to root A80 please...